[T106][ZXW-22]7520V3SCV2.01.01.02P42U09_VEC_V0.8_AP_VEC origin source commit
Change-Id: Ic6e05d89ecd62fc34f82b23dcf306c93764aec4b
diff --git a/ap/os/linux/linux-3.4.x/drivers/ide/rz1000.c b/ap/os/linux/linux-3.4.x/drivers/ide/rz1000.c
new file mode 100644
index 0000000..a6414a8
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/drivers/ide/rz1000.c
@@ -0,0 +1,99 @@
+/*
+ * Copyright (C) 1995-1998 Linus Torvalds & author (see below)
+ */
+
+/*
+ * Principal Author: mlord@pobox.com (Mark Lord)
+ *
+ * See linux/MAINTAINERS for address of current maintainer.
+ *
+ * This file provides support for disabling the buggy read-ahead
+ * mode of the RZ1000 IDE chipset, commonly used on Intel motherboards.
+ *
+ * Dunno if this fixes both ports, or only the primary port (?).
+ */
+
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/ide.h>
+#include <linux/init.h>
+
+#define DRV_NAME "rz1000"
+
+static int __devinit rz1000_disable_readahead(struct pci_dev *dev)
+{
+ u16 reg;
+
+ if (!pci_read_config_word (dev, 0x40, ®) &&
+ !pci_write_config_word(dev, 0x40, reg & 0xdfff)) {
+ printk(KERN_INFO "%s: disabled chipset read-ahead "
+ "(buggy RZ1000/RZ1001)\n", pci_name(dev));
+ return 0;
+ } else {
+ printk(KERN_INFO "%s: serialized, disabled unmasking "
+ "(buggy RZ1000/RZ1001)\n", pci_name(dev));
+ return 1;
+ }
+}
+
+static const struct ide_port_info rz1000_chipset __devinitdata = {
+ .name = DRV_NAME,
+ .host_flags = IDE_HFLAG_NO_DMA,
+};
+
+static int __devinit rz1000_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+{
+ struct ide_port_info d = rz1000_chipset;
+ int rc;
+
+ rc = pci_enable_device(dev);
+ if (rc)
+ return rc;
+
+ if (rz1000_disable_readahead(dev)) {
+ d.host_flags |= IDE_HFLAG_SERIALIZE;
+ d.host_flags |= IDE_HFLAG_NO_UNMASK_IRQS;
+ }
+
+ return ide_pci_init_one(dev, &d, NULL);
+}
+
+static void rz1000_remove(struct pci_dev *dev)
+{
+ ide_pci_remove(dev);
+ pci_disable_device(dev);
+}
+
+static const struct pci_device_id rz1000_pci_tbl[] = {
+ { PCI_VDEVICE(PCTECH, PCI_DEVICE_ID_PCTECH_RZ1000), 0 },
+ { PCI_VDEVICE(PCTECH, PCI_DEVICE_ID_PCTECH_RZ1001), 0 },
+ { 0, },
+};
+MODULE_DEVICE_TABLE(pci, rz1000_pci_tbl);
+
+static struct pci_driver rz1000_pci_driver = {
+ .name = "RZ1000_IDE",
+ .id_table = rz1000_pci_tbl,
+ .probe = rz1000_init_one,
+ .remove = rz1000_remove,
+};
+
+static int __init rz1000_ide_init(void)
+{
+ return ide_pci_register_driver(&rz1000_pci_driver);
+}
+
+static void __exit rz1000_ide_exit(void)
+{
+ pci_unregister_driver(&rz1000_pci_driver);
+}
+
+module_init(rz1000_ide_init);
+module_exit(rz1000_ide_exit);
+
+MODULE_AUTHOR("Andre Hedrick");
+MODULE_DESCRIPTION("PCI driver module for RZ1000 IDE");
+MODULE_LICENSE("GPL");
+