[T106][ZXW-22]7520V3SCV2.01.01.02P42U09_VEC_V0.8_AP_VEC origin source commit
Change-Id: Ic6e05d89ecd62fc34f82b23dcf306c93764aec4b
diff --git a/ap/os/linux/linux-3.4.x/drivers/mfd/twl6030-irq.c b/ap/os/linux/linux-3.4.x/drivers/mfd/twl6030-irq.c
new file mode 100644
index 0000000..b76902f
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/drivers/mfd/twl6030-irq.c
@@ -0,0 +1,446 @@
+/*
+ * twl6030-irq.c - TWL6030 irq support
+ *
+ * Copyright (C) 2005-2009 Texas Instruments, Inc.
+ *
+ * Modifications to defer interrupt handling to a kernel thread:
+ * Copyright (C) 2006 MontaVista Software, Inc.
+ *
+ * Based on tlv320aic23.c:
+ * Copyright (c) by Kai Svahn <kai.svahn@nokia.com>
+ *
+ * Code cleanup and modifications to IRQ handler.
+ * by syed khasim <x0khasim@ti.com>
+ *
+ * TWL6030 specific code and IRQ handling changes by
+ * Jagadeesh Bhaskar Pakaravoor <j-pakaravoor@ti.com>
+ * Balaji T K <balajitk@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/init.h>
+#include <linux/export.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kthread.h>
+#include <linux/i2c/twl.h>
+#include <linux/platform_device.h>
+#include <linux/suspend.h>
+#include <linux/of.h>
+#include <linux/irqdomain.h>
+
+#include "twl-core.h"
+
+/*
+ * TWL6030 (unlike its predecessors, which had two level interrupt handling)
+ * three interrupt registers INT_STS_A, INT_STS_B and INT_STS_C.
+ * It exposes status bits saying who has raised an interrupt. There are
+ * three mask registers that corresponds to these status registers, that
+ * enables/disables these interrupts.
+ *
+ * We set up IRQs starting at a platform-specified base. An interrupt map table,
+ * specifies mapping between interrupt number and the associated module.
+ */
+#define TWL6030_NR_IRQS 20
+
+static int twl6030_interrupt_mapping[24] = {
+ PWR_INTR_OFFSET, /* Bit 0 PWRON */
+ PWR_INTR_OFFSET, /* Bit 1 RPWRON */
+ PWR_INTR_OFFSET, /* Bit 2 BAT_VLOW */
+ RTC_INTR_OFFSET, /* Bit 3 RTC_ALARM */
+ RTC_INTR_OFFSET, /* Bit 4 RTC_PERIOD */
+ HOTDIE_INTR_OFFSET, /* Bit 5 HOT_DIE */
+ SMPSLDO_INTR_OFFSET, /* Bit 6 VXXX_SHORT */
+ SMPSLDO_INTR_OFFSET, /* Bit 7 VMMC_SHORT */
+
+ SMPSLDO_INTR_OFFSET, /* Bit 8 VUSIM_SHORT */
+ BATDETECT_INTR_OFFSET, /* Bit 9 BAT */
+ SIMDETECT_INTR_OFFSET, /* Bit 10 SIM */
+ MMCDETECT_INTR_OFFSET, /* Bit 11 MMC */
+ RSV_INTR_OFFSET, /* Bit 12 Reserved */
+ MADC_INTR_OFFSET, /* Bit 13 GPADC_RT_EOC */
+ MADC_INTR_OFFSET, /* Bit 14 GPADC_SW_EOC */
+ GASGAUGE_INTR_OFFSET, /* Bit 15 CC_AUTOCAL */
+
+ USBOTG_INTR_OFFSET, /* Bit 16 ID_WKUP */
+ USBOTG_INTR_OFFSET, /* Bit 17 VBUS_WKUP */
+ USBOTG_INTR_OFFSET, /* Bit 18 ID */
+ USB_PRES_INTR_OFFSET, /* Bit 19 VBUS */
+ CHARGER_INTR_OFFSET, /* Bit 20 CHRG_CTRL */
+ CHARGERFAULT_INTR_OFFSET, /* Bit 21 EXT_CHRG */
+ CHARGERFAULT_INTR_OFFSET, /* Bit 22 INT_CHRG */
+ RSV_INTR_OFFSET, /* Bit 23 Reserved */
+};
+/*----------------------------------------------------------------------*/
+
+static unsigned twl6030_irq_base;
+static int twl_irq;
+static bool twl_irq_wake_enabled;
+
+static struct completion irq_event;
+static atomic_t twl6030_wakeirqs = ATOMIC_INIT(0);
+
+static int twl6030_irq_pm_notifier(struct notifier_block *notifier,
+ unsigned long pm_event, void *unused)
+{
+ int chained_wakeups;
+
+ switch (pm_event) {
+ case PM_SUSPEND_PREPARE:
+ chained_wakeups = atomic_read(&twl6030_wakeirqs);
+
+ if (chained_wakeups && !twl_irq_wake_enabled) {
+ if (enable_irq_wake(twl_irq))
+ pr_err("twl6030 IRQ wake enable failed\n");
+ else
+ twl_irq_wake_enabled = true;
+ } else if (!chained_wakeups && twl_irq_wake_enabled) {
+ disable_irq_wake(twl_irq);
+ twl_irq_wake_enabled = false;
+ }
+
+ disable_irq(twl_irq);
+ break;
+
+ case PM_POST_SUSPEND:
+ enable_irq(twl_irq);
+ break;
+
+ default:
+ break;
+ }
+
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block twl6030_irq_pm_notifier_block = {
+ .notifier_call = twl6030_irq_pm_notifier,
+};
+
+/*
+ * This thread processes interrupts reported by the Primary Interrupt Handler.
+ */
+static int twl6030_irq_thread(void *data)
+{
+ long irq = (long)data;
+ static unsigned i2c_errors;
+ static const unsigned max_i2c_errors = 100;
+ int ret;
+
+ while (!kthread_should_stop()) {
+ int i;
+ union {
+ u8 bytes[4];
+ u32 int_sts;
+ } sts;
+
+ /* Wait for IRQ, then read PIH irq status (also blocking) */
+ wait_for_completion_interruptible(&irq_event);
+
+ /* read INT_STS_A, B and C in one shot using a burst read */
+ ret = twl_i2c_read(TWL_MODULE_PIH, sts.bytes,
+ REG_INT_STS_A, 3);
+ if (ret) {
+ pr_warning("twl6030: I2C error %d reading PIH ISR\n",
+ ret);
+ if (++i2c_errors >= max_i2c_errors) {
+ printk(KERN_ERR "Maximum I2C error count"
+ " exceeded. Terminating %s.\n",
+ __func__);
+ break;
+ }
+ complete(&irq_event);
+ continue;
+ }
+
+
+
+ sts.bytes[3] = 0; /* Only 24 bits are valid*/
+
+ /*
+ * Since VBUS status bit is not reliable for VBUS disconnect
+ * use CHARGER VBUS detection status bit instead.
+ */
+ if (sts.bytes[2] & 0x10)
+ sts.bytes[2] |= 0x08;
+
+ for (i = 0; sts.int_sts; sts.int_sts >>= 1, i++) {
+ local_irq_disable();
+ if (sts.int_sts & 0x1) {
+ int module_irq = twl6030_irq_base +
+ twl6030_interrupt_mapping[i];
+ generic_handle_irq(module_irq);
+
+ }
+ local_irq_enable();
+ }
+
+ /*
+ * NOTE:
+ * Simulation confirms that documentation is wrong w.r.t the
+ * interrupt status clear operation. A single *byte* write to
+ * any one of STS_A to STS_C register results in all three
+ * STS registers being reset. Since it does not matter which
+ * value is written, all three registers are cleared on a
+ * single byte write, so we just use 0x0 to clear.
+ */
+ ret = twl_i2c_write_u8(TWL_MODULE_PIH, 0x00, REG_INT_STS_A);
+ if (ret)
+ pr_warning("twl6030: I2C error in clearing PIH ISR\n");
+
+ enable_irq(irq);
+ }
+
+ return 0;
+}
+
+/*
+ * handle_twl6030_int() is the desc->handle method for the twl6030 interrupt.
+ * This is a chained interrupt, so there is no desc->action method for it.
+ * Now we need to query the interrupt controller in the twl6030 to determine
+ * which module is generating the interrupt request. However, we can't do i2c
+ * transactions in interrupt context, so we must defer that work to a kernel
+ * thread. All we do here is acknowledge and mask the interrupt and wakeup
+ * the kernel thread.
+ */
+static irqreturn_t handle_twl6030_pih(int irq, void *devid)
+{
+ disable_irq_nosync(irq);
+ complete(devid);
+ return IRQ_HANDLED;
+}
+
+/*----------------------------------------------------------------------*/
+
+static inline void activate_irq(int irq)
+{
+#ifdef CONFIG_ARM
+ /* ARM requires an extra step to clear IRQ_NOREQUEST, which it
+ * sets on behalf of every irq_chip. Also sets IRQ_NOPROBE.
+ */
+ set_irq_flags(irq, IRQF_VALID);
+#else
+ /* same effect on other architectures */
+ irq_set_noprobe(irq);
+#endif
+}
+
+static int twl6030_irq_set_wake(struct irq_data *d, unsigned int on)
+{
+ if (on)
+ atomic_inc(&twl6030_wakeirqs);
+ else
+ atomic_dec(&twl6030_wakeirqs);
+
+ return 0;
+}
+
+int twl6030_interrupt_unmask(u8 bit_mask, u8 offset)
+{
+ int ret;
+ u8 unmask_value;
+ ret = twl_i2c_read_u8(TWL_MODULE_PIH, &unmask_value,
+ REG_INT_STS_A + offset);
+ unmask_value &= (~(bit_mask));
+ ret |= twl_i2c_write_u8(TWL_MODULE_PIH, unmask_value,
+ REG_INT_STS_A + offset); /* unmask INT_MSK_A/B/C */
+ return ret;
+}
+EXPORT_SYMBOL(twl6030_interrupt_unmask);
+
+int twl6030_interrupt_mask(u8 bit_mask, u8 offset)
+{
+ int ret;
+ u8 mask_value;
+ ret = twl_i2c_read_u8(TWL_MODULE_PIH, &mask_value,
+ REG_INT_STS_A + offset);
+ mask_value |= (bit_mask);
+ ret |= twl_i2c_write_u8(TWL_MODULE_PIH, mask_value,
+ REG_INT_STS_A + offset); /* mask INT_MSK_A/B/C */
+ return ret;
+}
+EXPORT_SYMBOL(twl6030_interrupt_mask);
+
+int twl6030_mmc_card_detect_config(void)
+{
+ int ret;
+ u8 reg_val = 0;
+
+ /* Unmasking the Card detect Interrupt line for MMC1 from Phoenix */
+ twl6030_interrupt_unmask(TWL6030_MMCDETECT_INT_MASK,
+ REG_INT_MSK_LINE_B);
+ twl6030_interrupt_unmask(TWL6030_MMCDETECT_INT_MASK,
+ REG_INT_MSK_STS_B);
+ /*
+ * Initially Configuring MMC_CTRL for receiving interrupts &
+ * Card status on TWL6030 for MMC1
+ */
+ ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, ®_val, TWL6030_MMCCTRL);
+ if (ret < 0) {
+ pr_err("twl6030: Failed to read MMCCTRL, error %d\n", ret);
+ return ret;
+ }
+ reg_val &= ~VMMC_AUTO_OFF;
+ reg_val |= SW_FC;
+ ret = twl_i2c_write_u8(TWL6030_MODULE_ID0, reg_val, TWL6030_MMCCTRL);
+ if (ret < 0) {
+ pr_err("twl6030: Failed to write MMCCTRL, error %d\n", ret);
+ return ret;
+ }
+
+ /* Configuring PullUp-PullDown register */
+ ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, ®_val,
+ TWL6030_CFG_INPUT_PUPD3);
+ if (ret < 0) {
+ pr_err("twl6030: Failed to read CFG_INPUT_PUPD3, error %d\n",
+ ret);
+ return ret;
+ }
+ reg_val &= ~(MMC_PU | MMC_PD);
+ ret = twl_i2c_write_u8(TWL6030_MODULE_ID0, reg_val,
+ TWL6030_CFG_INPUT_PUPD3);
+ if (ret < 0) {
+ pr_err("twl6030: Failed to write CFG_INPUT_PUPD3, error %d\n",
+ ret);
+ return ret;
+ }
+
+ return twl6030_irq_base + MMCDETECT_INTR_OFFSET;
+}
+EXPORT_SYMBOL(twl6030_mmc_card_detect_config);
+
+int twl6030_mmc_card_detect(struct device *dev, int slot)
+{
+ int ret = -EIO;
+ u8 read_reg = 0;
+ struct platform_device *pdev = to_platform_device(dev);
+
+ if (pdev->id) {
+ /* TWL6030 provide's Card detect support for
+ * only MMC1 controller.
+ */
+ pr_err("Unknown MMC controller %d in %s\n", pdev->id, __func__);
+ return ret;
+ }
+ /*
+ * BIT0 of MMC_CTRL on TWL6030 provides card status for MMC1
+ * 0 - Card not present ,1 - Card present
+ */
+ ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, &read_reg,
+ TWL6030_MMCCTRL);
+ if (ret >= 0)
+ ret = read_reg & STS_MMC;
+ return ret;
+}
+EXPORT_SYMBOL(twl6030_mmc_card_detect);
+
+int twl6030_init_irq(struct device *dev, int irq_num)
+{
+ struct device_node *node = dev->of_node;
+ int nr_irqs, irq_base, irq_end;
+ struct task_struct *task;
+ static struct irq_chip twl6030_irq_chip;
+ int status = 0;
+ int i;
+ u8 mask[4];
+
+ nr_irqs = TWL6030_NR_IRQS;
+
+ irq_base = irq_alloc_descs(-1, 0, nr_irqs, 0);
+ if (IS_ERR_VALUE(irq_base)) {
+ dev_err(dev, "Fail to allocate IRQ descs\n");
+ return irq_base;
+ }
+
+ irq_domain_add_legacy(node, nr_irqs, irq_base, 0,
+ &irq_domain_simple_ops, NULL);
+
+ irq_end = irq_base + nr_irqs;
+
+ mask[1] = 0xFF;
+ mask[2] = 0xFF;
+ mask[3] = 0xFF;
+
+ /* mask all int lines */
+ twl_i2c_write(TWL_MODULE_PIH, &mask[0], REG_INT_MSK_LINE_A, 3);
+ /* mask all int sts */
+ twl_i2c_write(TWL_MODULE_PIH, &mask[0], REG_INT_MSK_STS_A, 3);
+ /* clear INT_STS_A,B,C */
+ twl_i2c_write(TWL_MODULE_PIH, &mask[0], REG_INT_STS_A, 3);
+
+ twl6030_irq_base = irq_base;
+
+ /*
+ * install an irq handler for each of the modules;
+ * clone dummy irq_chip since PIH can't *do* anything
+ */
+ twl6030_irq_chip = dummy_irq_chip;
+ twl6030_irq_chip.name = "twl6030";
+ twl6030_irq_chip.irq_set_type = NULL;
+ twl6030_irq_chip.irq_set_wake = twl6030_irq_set_wake;
+
+ for (i = irq_base; i < irq_end; i++) {
+ irq_set_chip_and_handler(i, &twl6030_irq_chip,
+ handle_simple_irq);
+ irq_set_chip_data(i, (void *)irq_num);
+ activate_irq(i);
+ }
+
+ dev_info(dev, "PIH (irq %d) chaining IRQs %d..%d\n",
+ irq_num, irq_base, irq_end);
+
+ /* install an irq handler to demultiplex the TWL6030 interrupt */
+ init_completion(&irq_event);
+
+ status = request_irq(irq_num, handle_twl6030_pih, 0, "TWL6030-PIH",
+ &irq_event);
+ if (status < 0) {
+ dev_err(dev, "could not claim irq %d: %d\n", irq_num, status);
+ goto fail_irq;
+ }
+
+ task = kthread_run(twl6030_irq_thread, (void *)irq_num, "twl6030-irq");
+ if (IS_ERR(task)) {
+ dev_err(dev, "could not create irq %d thread!\n", irq_num);
+ status = PTR_ERR(task);
+ goto fail_kthread;
+ }
+
+ twl_irq = irq_num;
+ register_pm_notifier(&twl6030_irq_pm_notifier_block);
+ return irq_base;
+
+fail_kthread:
+ free_irq(irq_num, &irq_event);
+
+fail_irq:
+ for (i = irq_base; i < irq_end; i++)
+ irq_set_chip_and_handler(i, NULL, NULL);
+
+ return status;
+}
+
+int twl6030_exit_irq(void)
+{
+ unregister_pm_notifier(&twl6030_irq_pm_notifier_block);
+
+ if (twl6030_irq_base) {
+ pr_err("twl6030: can't yet clean up IRQs?\n");
+ return -ENOSYS;
+ }
+ return 0;
+}
+