[T106][ZXW-22]7520V3SCV2.01.01.02P42U09_VEC_V0.8_AP_VEC origin source commit
Change-Id: Ic6e05d89ecd62fc34f82b23dcf306c93764aec4b
diff --git a/ap/os/linux/linux-3.4.x/drivers/net/mii.c b/ap/os/linux/linux-3.4.x/drivers/net/mii.c
new file mode 100644
index 0000000..4a99c39
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/drivers/net/mii.c
@@ -0,0 +1,472 @@
+/*
+
+ mii.c: MII interface library
+
+ Maintained by Jeff Garzik <jgarzik@pobox.com>
+ Copyright 2001,2002 Jeff Garzik
+
+ Various code came from myson803.c and other files by
+ Donald Becker. Copyright:
+
+ Written 1998-2002 by Donald Becker.
+
+ This software may be used and distributed according
+ to the terms of the GNU General Public License (GPL),
+ incorporated herein by reference. Drivers based on
+ or derived from this code fall under the GPL and must
+ retain the authorship, copyright and license notice.
+ This file is not a complete program and may only be
+ used when the entire operating system is licensed
+ under the GPL.
+
+ The author may be reached as becker@scyld.com, or C/O
+ Scyld Computing Corporation
+ 410 Severn Ave., Suite 210
+ Annapolis MD 21403
+
+
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+
+static u32 mii_get_an(struct mii_if_info *mii, u16 addr)
+{
+ int advert;
+
+ advert = mii->mdio_read(mii->dev, mii->phy_id, addr);
+
+ return mii_lpa_to_ethtool_lpa_t(advert);
+}
+
+/**
+ * mii_ethtool_gset - get settings that are specified in @ecmd
+ * @mii: MII interface
+ * @ecmd: requested ethtool_cmd
+ *
+ * The @ecmd parameter is expected to have been cleared before calling
+ * mii_ethtool_gset().
+ *
+ * Returns 0 for success, negative on error.
+ */
+int mii_ethtool_gset(struct mii_if_info *mii, struct ethtool_cmd *ecmd)
+{
+ struct net_device *dev = mii->dev;
+ u16 bmcr, bmsr, ctrl1000 = 0, stat1000 = 0;
+ u32 nego;
+
+ ecmd->supported =
+ (SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full |
+ SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full |
+ SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII);
+ if (mii->supports_gmii)
+ ecmd->supported |= SUPPORTED_1000baseT_Half |
+ SUPPORTED_1000baseT_Full;
+
+ /* only supports twisted-pair */
+ ecmd->port = PORT_MII;
+
+ /* only supports internal transceiver */
+ ecmd->transceiver = XCVR_INTERNAL;
+
+ /* this isn't fully supported at higher layers */
+ ecmd->phy_address = mii->phy_id;
+ ecmd->mdio_support = ETH_MDIO_SUPPORTS_C22;
+
+ ecmd->advertising = ADVERTISED_TP | ADVERTISED_MII;
+
+ bmcr = mii->mdio_read(dev, mii->phy_id, MII_BMCR);
+ bmsr = mii->mdio_read(dev, mii->phy_id, MII_BMSR);
+ if (mii->supports_gmii) {
+ ctrl1000 = mii->mdio_read(dev, mii->phy_id, MII_CTRL1000);
+ stat1000 = mii->mdio_read(dev, mii->phy_id, MII_STAT1000);
+ }
+ if (bmcr & BMCR_ANENABLE) {
+ ecmd->advertising |= ADVERTISED_Autoneg;
+ ecmd->autoneg = AUTONEG_ENABLE;
+
+ ecmd->advertising |= mii_get_an(mii, MII_ADVERTISE);
+ if (mii->supports_gmii)
+ ecmd->advertising |=
+ mii_ctrl1000_to_ethtool_adv_t(ctrl1000);
+
+ if (bmsr & BMSR_ANEGCOMPLETE) {
+ ecmd->lp_advertising = mii_get_an(mii, MII_LPA);
+ ecmd->lp_advertising |=
+ mii_stat1000_to_ethtool_lpa_t(stat1000);
+ } else {
+ ecmd->lp_advertising = 0;
+ }
+
+ nego = ecmd->advertising & ecmd->lp_advertising;
+
+ if (nego & (ADVERTISED_1000baseT_Full |
+ ADVERTISED_1000baseT_Half)) {
+ ethtool_cmd_speed_set(ecmd, SPEED_1000);
+ ecmd->duplex = !!(nego & ADVERTISED_1000baseT_Full);
+ } else if (nego & (ADVERTISED_100baseT_Full |
+ ADVERTISED_100baseT_Half)) {
+ ethtool_cmd_speed_set(ecmd, SPEED_100);
+ ecmd->duplex = !!(nego & ADVERTISED_100baseT_Full);
+ } else {
+ ethtool_cmd_speed_set(ecmd, SPEED_10);
+ ecmd->duplex = !!(nego & ADVERTISED_10baseT_Full);
+ }
+ } else {
+ ecmd->autoneg = AUTONEG_DISABLE;
+
+ ethtool_cmd_speed_set(ecmd,
+ ((bmcr & BMCR_SPEED1000 &&
+ (bmcr & BMCR_SPEED100) == 0) ?
+ SPEED_1000 :
+ ((bmcr & BMCR_SPEED100) ?
+ SPEED_100 : SPEED_10)));
+ ecmd->duplex = (bmcr & BMCR_FULLDPLX) ? DUPLEX_FULL : DUPLEX_HALF;
+ }
+
+ mii->full_duplex = ecmd->duplex;
+
+ /* ignore maxtxpkt, maxrxpkt for now */
+
+ return 0;
+}
+
+/**
+ * mii_ethtool_sset - set settings that are specified in @ecmd
+ * @mii: MII interface
+ * @ecmd: requested ethtool_cmd
+ *
+ * Returns 0 for success, negative on error.
+ */
+int mii_ethtool_sset(struct mii_if_info *mii, struct ethtool_cmd *ecmd)
+{
+ struct net_device *dev = mii->dev;
+ u32 speed = ethtool_cmd_speed(ecmd);
+
+ if (speed != SPEED_10 &&
+ speed != SPEED_100 &&
+ speed != SPEED_1000)
+ return -EINVAL;
+ if (ecmd->duplex != DUPLEX_HALF && ecmd->duplex != DUPLEX_FULL)
+ return -EINVAL;
+ if (ecmd->port != PORT_MII)
+ return -EINVAL;
+ if (ecmd->transceiver != XCVR_INTERNAL)
+ return -EINVAL;
+ if (ecmd->phy_address != mii->phy_id)
+ return -EINVAL;
+ if (ecmd->autoneg != AUTONEG_DISABLE && ecmd->autoneg != AUTONEG_ENABLE)
+ return -EINVAL;
+ if ((speed == SPEED_1000) && (!mii->supports_gmii))
+ return -EINVAL;
+
+ /* ignore supported, maxtxpkt, maxrxpkt */
+
+ if (ecmd->autoneg == AUTONEG_ENABLE) {
+ u32 bmcr, advert, tmp;
+ u32 advert2 = 0, tmp2 = 0;
+
+ if ((ecmd->advertising & (ADVERTISED_10baseT_Half |
+ ADVERTISED_10baseT_Full |
+ ADVERTISED_100baseT_Half |
+ ADVERTISED_100baseT_Full |
+ ADVERTISED_1000baseT_Half |
+ ADVERTISED_1000baseT_Full)) == 0)
+ return -EINVAL;
+
+ /* advertise only what has been requested */
+ advert = mii->mdio_read(dev, mii->phy_id, MII_ADVERTISE);
+ tmp = advert & ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
+ if (mii->supports_gmii) {
+ advert2 = mii->mdio_read(dev, mii->phy_id, MII_CTRL1000);
+ tmp2 = advert2 & ~(ADVERTISE_1000HALF | ADVERTISE_1000FULL);
+ }
+ tmp |= ethtool_adv_to_mii_adv_t(ecmd->advertising);
+
+ if (mii->supports_gmii)
+ tmp2 |=
+ ethtool_adv_to_mii_ctrl1000_t(ecmd->advertising);
+ if (advert != tmp) {
+ mii->mdio_write(dev, mii->phy_id, MII_ADVERTISE, tmp);
+ mii->advertising = tmp;
+ }
+ if ((mii->supports_gmii) && (advert2 != tmp2))
+ mii->mdio_write(dev, mii->phy_id, MII_CTRL1000, tmp2);
+
+ /* turn on autonegotiation, and force a renegotiate */
+ bmcr = mii->mdio_read(dev, mii->phy_id, MII_BMCR);
+ bmcr |= (BMCR_ANENABLE | BMCR_ANRESTART);
+ mii->mdio_write(dev, mii->phy_id, MII_BMCR, bmcr);
+
+ mii->force_media = 0;
+ } else {
+ u32 bmcr, tmp;
+
+ /* turn off auto negotiation, set speed and duplexity */
+ bmcr = mii->mdio_read(dev, mii->phy_id, MII_BMCR);
+ tmp = bmcr & ~(BMCR_ANENABLE | BMCR_SPEED100 |
+ BMCR_SPEED1000 | BMCR_FULLDPLX);
+ if (speed == SPEED_1000)
+ tmp |= BMCR_SPEED1000;
+ else if (speed == SPEED_100)
+ tmp |= BMCR_SPEED100;
+ if (ecmd->duplex == DUPLEX_FULL) {
+ tmp |= BMCR_FULLDPLX;
+ mii->full_duplex = 1;
+ } else
+ mii->full_duplex = 0;
+ if (bmcr != tmp)
+ mii->mdio_write(dev, mii->phy_id, MII_BMCR, tmp);
+
+ mii->force_media = 1;
+ }
+ return 0;
+}
+
+/**
+ * mii_check_gmii_support - check if the MII supports Gb interfaces
+ * @mii: the MII interface
+ */
+int mii_check_gmii_support(struct mii_if_info *mii)
+{
+ int reg;
+
+ reg = mii->mdio_read(mii->dev, mii->phy_id, MII_BMSR);
+ if (reg & BMSR_ESTATEN) {
+ reg = mii->mdio_read(mii->dev, mii->phy_id, MII_ESTATUS);
+ if (reg & (ESTATUS_1000_TFULL | ESTATUS_1000_THALF))
+ return 1;
+ }
+
+ return 0;
+}
+
+/**
+ * mii_link_ok - is link status up/ok
+ * @mii: the MII interface
+ *
+ * Returns 1 if the MII reports link status up/ok, 0 otherwise.
+ */
+int mii_link_ok (struct mii_if_info *mii)
+{
+ /* first, a dummy read, needed to latch some MII phys */
+ mii->mdio_read(mii->dev, mii->phy_id, MII_BMSR);
+ if (mii->mdio_read(mii->dev, mii->phy_id, MII_BMSR) & BMSR_LSTATUS)
+ return 1;
+ return 0;
+}
+
+/**
+ * mii_nway_restart - restart NWay (autonegotiation) for this interface
+ * @mii: the MII interface
+ *
+ * Returns 0 on success, negative on error.
+ */
+int mii_nway_restart (struct mii_if_info *mii)
+{
+ int bmcr;
+ int r = -EINVAL;
+
+ /* if autoneg is off, it's an error */
+ bmcr = mii->mdio_read(mii->dev, mii->phy_id, MII_BMCR);
+
+ if (bmcr & BMCR_ANENABLE) {
+ bmcr |= BMCR_ANRESTART;
+ mii->mdio_write(mii->dev, mii->phy_id, MII_BMCR, bmcr);
+ r = 0;
+ }
+
+ return r;
+}
+
+/**
+ * mii_check_link - check MII link status
+ * @mii: MII interface
+ *
+ * If the link status changed (previous != current), call
+ * netif_carrier_on() if current link status is Up or call
+ * netif_carrier_off() if current link status is Down.
+ */
+void mii_check_link (struct mii_if_info *mii)
+{
+ int cur_link = mii_link_ok(mii);
+ int prev_link = netif_carrier_ok(mii->dev);
+
+ if (cur_link && !prev_link)
+ netif_carrier_on(mii->dev);
+ else if (prev_link && !cur_link)
+ netif_carrier_off(mii->dev);
+}
+
+/**
+ * mii_check_media - check the MII interface for a duplex change
+ * @mii: the MII interface
+ * @ok_to_print: OK to print link up/down messages
+ * @init_media: OK to save duplex mode in @mii
+ *
+ * Returns 1 if the duplex mode changed, 0 if not.
+ * If the media type is forced, always returns 0.
+ */
+unsigned int mii_check_media (struct mii_if_info *mii,
+ unsigned int ok_to_print,
+ unsigned int init_media)
+{
+ unsigned int old_carrier, new_carrier;
+ int advertise, lpa, media, duplex;
+ int lpa2 = 0;
+
+ /* if forced media, go no further */
+ if (mii->force_media)
+ return 0; /* duplex did not change */
+
+ /* check current and old link status */
+ old_carrier = netif_carrier_ok(mii->dev) ? 1 : 0;
+ new_carrier = (unsigned int) mii_link_ok(mii);
+
+ /* if carrier state did not change, this is a "bounce",
+ * just exit as everything is already set correctly
+ */
+ if ((!init_media) && (old_carrier == new_carrier))
+ return 0; /* duplex did not change */
+
+ /* no carrier, nothing much to do */
+ if (!new_carrier) {
+ netif_carrier_off(mii->dev);
+ if (ok_to_print)
+ netdev_info(mii->dev, "link down\n");
+ return 0; /* duplex did not change */
+ }
+
+ /*
+ * we have carrier, see who's on the other end
+ */
+ netif_carrier_on(mii->dev);
+
+ /* get MII advertise and LPA values */
+ if ((!init_media) && (mii->advertising))
+ advertise = mii->advertising;
+ else {
+ advertise = mii->mdio_read(mii->dev, mii->phy_id, MII_ADVERTISE);
+ mii->advertising = advertise;
+ }
+ lpa = mii->mdio_read(mii->dev, mii->phy_id, MII_LPA);
+ if (mii->supports_gmii)
+ lpa2 = mii->mdio_read(mii->dev, mii->phy_id, MII_STAT1000);
+
+ /* figure out media and duplex from advertise and LPA values */
+ media = mii_nway_result(lpa & advertise);
+ duplex = (media & ADVERTISE_FULL) ? 1 : 0;
+ if (lpa2 & LPA_1000FULL)
+ duplex = 1;
+
+ if (ok_to_print)
+ netdev_info(mii->dev, "link up, %uMbps, %s-duplex, lpa 0x%04X\n",
+ lpa2 & (LPA_1000FULL | LPA_1000HALF) ? 1000 :
+ media & (ADVERTISE_100FULL | ADVERTISE_100HALF) ?
+ 100 : 10,
+ duplex ? "full" : "half",
+ lpa);
+
+ if ((init_media) || (mii->full_duplex != duplex)) {
+ mii->full_duplex = duplex;
+ return 1; /* duplex changed */
+ }
+
+ return 0; /* duplex did not change */
+}
+
+/**
+ * generic_mii_ioctl - main MII ioctl interface
+ * @mii_if: the MII interface
+ * @mii_data: MII ioctl data structure
+ * @cmd: MII ioctl command
+ * @duplex_chg_out: pointer to @duplex_changed status if there was no
+ * ioctl error
+ *
+ * Returns 0 on success, negative on error.
+ */
+int generic_mii_ioctl(struct mii_if_info *mii_if,
+ struct mii_ioctl_data *mii_data, int cmd,
+ unsigned int *duplex_chg_out)
+{
+ int rc = 0;
+ unsigned int duplex_changed = 0;
+
+ if (duplex_chg_out)
+ *duplex_chg_out = 0;
+
+ mii_data->phy_id &= mii_if->phy_id_mask;
+ mii_data->reg_num &= mii_if->reg_num_mask;
+
+ switch(cmd) {
+ case SIOCGMIIPHY:
+ mii_data->phy_id = mii_if->phy_id;
+ /* fall through */
+
+ case SIOCGMIIREG:
+ mii_data->val_out =
+ mii_if->mdio_read(mii_if->dev, mii_data->phy_id,
+ mii_data->reg_num);
+ break;
+
+ case SIOCSMIIREG: {
+ u16 val = mii_data->val_in;
+
+ if (mii_data->phy_id == mii_if->phy_id) {
+ switch(mii_data->reg_num) {
+ case MII_BMCR: {
+ unsigned int new_duplex = 0;
+ if (val & (BMCR_RESET|BMCR_ANENABLE))
+ mii_if->force_media = 0;
+ else
+ mii_if->force_media = 1;
+ if (mii_if->force_media &&
+ (val & BMCR_FULLDPLX))
+ new_duplex = 1;
+ if (mii_if->full_duplex != new_duplex) {
+ duplex_changed = 1;
+ mii_if->full_duplex = new_duplex;
+ }
+ break;
+ }
+ case MII_ADVERTISE:
+ mii_if->advertising = val;
+ break;
+ default:
+ /* do nothing */
+ break;
+ }
+ }
+
+ mii_if->mdio_write(mii_if->dev, mii_data->phy_id,
+ mii_data->reg_num, val);
+ break;
+ }
+
+ default:
+ rc = -EOPNOTSUPP;
+ break;
+ }
+
+ if ((rc == 0) && (duplex_chg_out) && (duplex_changed))
+ *duplex_chg_out = 1;
+
+ return rc;
+}
+
+MODULE_AUTHOR ("Jeff Garzik <jgarzik@pobox.com>");
+MODULE_DESCRIPTION ("MII hardware support library");
+MODULE_LICENSE("GPL");
+
+EXPORT_SYMBOL(mii_link_ok);
+EXPORT_SYMBOL(mii_nway_restart);
+EXPORT_SYMBOL(mii_ethtool_gset);
+EXPORT_SYMBOL(mii_ethtool_sset);
+EXPORT_SYMBOL(mii_check_link);
+EXPORT_SYMBOL(mii_check_media);
+EXPORT_SYMBOL(mii_check_gmii_support);
+EXPORT_SYMBOL(generic_mii_ioctl);
+