[T106][ZXW-22]7520V3SCV2.01.01.02P42U09_VEC_V0.8_AP_VEC origin source commit

Change-Id: Ic6e05d89ecd62fc34f82b23dcf306c93764aec4b
diff --git a/ap/os/linux/linux-3.4.x/drivers/pci/pci-acpi.c b/ap/os/linux/linux-3.4.x/drivers/pci/pci-acpi.c
new file mode 100644
index 0000000..61e2fef
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/drivers/pci/pci-acpi.c
@@ -0,0 +1,377 @@
+/*
+ * File:	pci-acpi.c
+ * Purpose:	Provide PCI support in ACPI
+ *
+ * Copyright (C) 2005 David Shaohua Li <shaohua.li@intel.com>
+ * Copyright (C) 2004 Tom Long Nguyen <tom.l.nguyen@intel.com>
+ * Copyright (C) 2004 Intel Corp.
+ */
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/module.h>
+#include <linux/pci-aspm.h>
+#include <acpi/acpi.h>
+#include <acpi/acpi_bus.h>
+
+#include <linux/pci-acpi.h>
+#include <linux/pm_runtime.h>
+#include "pci.h"
+
+static DEFINE_MUTEX(pci_acpi_pm_notify_mtx);
+
+/**
+ * pci_acpi_wake_bus - Wake-up notification handler for root buses.
+ * @handle: ACPI handle of a device the notification is for.
+ * @event: Type of the signaled event.
+ * @context: PCI root bus to wake up devices on.
+ */
+static void pci_acpi_wake_bus(acpi_handle handle, u32 event, void *context)
+{
+	struct pci_bus *pci_bus = context;
+
+	if (event == ACPI_NOTIFY_DEVICE_WAKE && pci_bus)
+		pci_pme_wakeup_bus(pci_bus);
+}
+
+/**
+ * pci_acpi_wake_dev - Wake-up notification handler for PCI devices.
+ * @handle: ACPI handle of a device the notification is for.
+ * @event: Type of the signaled event.
+ * @context: PCI device object to wake up.
+ */
+static void pci_acpi_wake_dev(acpi_handle handle, u32 event, void *context)
+{
+	struct pci_dev *pci_dev = context;
+
+	if (event != ACPI_NOTIFY_DEVICE_WAKE || !pci_dev)
+		return;
+
+	if (!pci_dev->pm_cap || !pci_dev->pme_support
+	     || pci_check_pme_status(pci_dev)) {
+		if (pci_dev->pme_poll)
+			pci_dev->pme_poll = false;
+
+		pci_wakeup_event(pci_dev);
+		pm_runtime_resume(&pci_dev->dev);
+	}
+
+	if (pci_dev->subordinate)
+		pci_pme_wakeup_bus(pci_dev->subordinate);
+}
+
+/**
+ * add_pm_notifier - Register PM notifier for given ACPI device.
+ * @dev: ACPI device to add the notifier for.
+ * @context: PCI device or bus to check for PME status if an event is signaled.
+ *
+ * NOTE: @dev need not be a run-wake or wake-up device to be a valid source of
+ * PM wake-up events.  For example, wake-up events may be generated for bridges
+ * if one of the devices below the bridge is signaling PME, even if the bridge
+ * itself doesn't have a wake-up GPE associated with it.
+ */
+static acpi_status add_pm_notifier(struct acpi_device *dev,
+				   acpi_notify_handler handler,
+				   void *context)
+{
+	acpi_status status = AE_ALREADY_EXISTS;
+
+	mutex_lock(&pci_acpi_pm_notify_mtx);
+
+	if (dev->wakeup.flags.notifier_present)
+		goto out;
+
+	status = acpi_install_notify_handler(dev->handle,
+					     ACPI_SYSTEM_NOTIFY,
+					     handler, context);
+	if (ACPI_FAILURE(status))
+		goto out;
+
+	dev->wakeup.flags.notifier_present = true;
+
+ out:
+	mutex_unlock(&pci_acpi_pm_notify_mtx);
+	return status;
+}
+
+/**
+ * remove_pm_notifier - Unregister PM notifier from given ACPI device.
+ * @dev: ACPI device to remove the notifier from.
+ */
+static acpi_status remove_pm_notifier(struct acpi_device *dev,
+				      acpi_notify_handler handler)
+{
+	acpi_status status = AE_BAD_PARAMETER;
+
+	mutex_lock(&pci_acpi_pm_notify_mtx);
+
+	if (!dev->wakeup.flags.notifier_present)
+		goto out;
+
+	status = acpi_remove_notify_handler(dev->handle,
+					    ACPI_SYSTEM_NOTIFY,
+					    handler);
+	if (ACPI_FAILURE(status))
+		goto out;
+
+	dev->wakeup.flags.notifier_present = false;
+
+ out:
+	mutex_unlock(&pci_acpi_pm_notify_mtx);
+	return status;
+}
+
+/**
+ * pci_acpi_add_bus_pm_notifier - Register PM notifier for given PCI bus.
+ * @dev: ACPI device to add the notifier for.
+ * @pci_bus: PCI bus to walk checking for PME status if an event is signaled.
+ */
+acpi_status pci_acpi_add_bus_pm_notifier(struct acpi_device *dev,
+					 struct pci_bus *pci_bus)
+{
+	return add_pm_notifier(dev, pci_acpi_wake_bus, pci_bus);
+}
+
+/**
+ * pci_acpi_remove_bus_pm_notifier - Unregister PCI bus PM notifier.
+ * @dev: ACPI device to remove the notifier from.
+ */
+acpi_status pci_acpi_remove_bus_pm_notifier(struct acpi_device *dev)
+{
+	return remove_pm_notifier(dev, pci_acpi_wake_bus);
+}
+
+/**
+ * pci_acpi_add_pm_notifier - Register PM notifier for given PCI device.
+ * @dev: ACPI device to add the notifier for.
+ * @pci_dev: PCI device to check for the PME status if an event is signaled.
+ */
+acpi_status pci_acpi_add_pm_notifier(struct acpi_device *dev,
+				     struct pci_dev *pci_dev)
+{
+	return add_pm_notifier(dev, pci_acpi_wake_dev, pci_dev);
+}
+
+/**
+ * pci_acpi_remove_pm_notifier - Unregister PCI device PM notifier.
+ * @dev: ACPI device to remove the notifier from.
+ */
+acpi_status pci_acpi_remove_pm_notifier(struct acpi_device *dev)
+{
+	return remove_pm_notifier(dev, pci_acpi_wake_dev);
+}
+
+/*
+ * _SxD returns the D-state with the highest power
+ * (lowest D-state number) supported in the S-state "x".
+ *
+ * If the devices does not have a _PRW
+ * (Power Resources for Wake) supporting system wakeup from "x"
+ * then the OS is free to choose a lower power (higher number
+ * D-state) than the return value from _SxD.
+ *
+ * But if _PRW is enabled at S-state "x", the OS
+ * must not choose a power lower than _SxD --
+ * unless the device has an _SxW method specifying
+ * the lowest power (highest D-state number) the device
+ * may enter while still able to wake the system.
+ *
+ * ie. depending on global OS policy:
+ *
+ * if (_PRW at S-state x)
+ *	choose from highest power _SxD to lowest power _SxW
+ * else // no _PRW at S-state x
+ * 	choose highest power _SxD or any lower power
+ */
+
+static pci_power_t acpi_pci_choose_state(struct pci_dev *pdev)
+{
+	int acpi_state;
+
+	acpi_state = acpi_pm_device_sleep_state(&pdev->dev, NULL);
+	if (acpi_state < 0)
+		return PCI_POWER_ERROR;
+
+	switch (acpi_state) {
+	case ACPI_STATE_D0:
+		return PCI_D0;
+	case ACPI_STATE_D1:
+		return PCI_D1;
+	case ACPI_STATE_D2:
+		return PCI_D2;
+	case ACPI_STATE_D3_HOT:
+		return PCI_D3hot;
+	case ACPI_STATE_D3_COLD:
+		return PCI_D3cold;
+	}
+	return PCI_POWER_ERROR;
+}
+
+static bool acpi_pci_power_manageable(struct pci_dev *dev)
+{
+	acpi_handle handle = DEVICE_ACPI_HANDLE(&dev->dev);
+
+	return handle ? acpi_bus_power_manageable(handle) : false;
+}
+
+static int acpi_pci_set_power_state(struct pci_dev *dev, pci_power_t state)
+{
+	acpi_handle handle = DEVICE_ACPI_HANDLE(&dev->dev);
+	acpi_handle tmp;
+	static const u8 state_conv[] = {
+		[PCI_D0] = ACPI_STATE_D0,
+		[PCI_D1] = ACPI_STATE_D1,
+		[PCI_D2] = ACPI_STATE_D2,
+		[PCI_D3hot] = ACPI_STATE_D3,
+		[PCI_D3cold] = ACPI_STATE_D3
+	};
+	int error = -EINVAL;
+
+	/* If the ACPI device has _EJ0, ignore the device */
+	if (!handle || ACPI_SUCCESS(acpi_get_handle(handle, "_EJ0", &tmp)))
+		return -ENODEV;
+
+	switch (state) {
+	case PCI_D0:
+	case PCI_D1:
+	case PCI_D2:
+	case PCI_D3hot:
+	case PCI_D3cold:
+		error = acpi_bus_set_power(handle, state_conv[state]);
+	}
+
+	if (!error)
+		dev_printk(KERN_INFO, &dev->dev,
+				"power state changed by ACPI to D%d\n", state);
+
+	return error;
+}
+
+static bool acpi_pci_can_wakeup(struct pci_dev *dev)
+{
+	acpi_handle handle = DEVICE_ACPI_HANDLE(&dev->dev);
+
+	return handle ? acpi_bus_can_wakeup(handle) : false;
+}
+
+static void acpi_pci_propagate_wakeup_enable(struct pci_bus *bus, bool enable)
+{
+	while (bus->parent) {
+		if (!acpi_pm_device_sleep_wake(&bus->self->dev, enable))
+			return;
+		bus = bus->parent;
+	}
+
+	/* We have reached the root bus. */
+	if (bus->bridge)
+		acpi_pm_device_sleep_wake(bus->bridge, enable);
+}
+
+static int acpi_pci_sleep_wake(struct pci_dev *dev, bool enable)
+{
+	if (acpi_pci_can_wakeup(dev))
+		return acpi_pm_device_sleep_wake(&dev->dev, enable);
+
+	acpi_pci_propagate_wakeup_enable(dev->bus, enable);
+	return 0;
+}
+
+static void acpi_pci_propagate_run_wake(struct pci_bus *bus, bool enable)
+{
+	while (bus->parent) {
+		struct pci_dev *bridge = bus->self;
+
+		if (bridge->pme_interrupt)
+			return;
+		if (!acpi_pm_device_run_wake(&bridge->dev, enable))
+			return;
+		bus = bus->parent;
+	}
+
+	/* We have reached the root bus. */
+	if (bus->bridge)
+		acpi_pm_device_run_wake(bus->bridge, enable);
+}
+
+static int acpi_pci_run_wake(struct pci_dev *dev, bool enable)
+{
+	if (dev->pme_interrupt)
+		return 0;
+
+	if (!acpi_pm_device_run_wake(&dev->dev, enable))
+		return 0;
+
+	acpi_pci_propagate_run_wake(dev->bus, enable);
+	return 0;
+}
+
+static struct pci_platform_pm_ops acpi_pci_platform_pm = {
+	.is_manageable = acpi_pci_power_manageable,
+	.set_state = acpi_pci_set_power_state,
+	.choose_state = acpi_pci_choose_state,
+	.can_wakeup = acpi_pci_can_wakeup,
+	.sleep_wake = acpi_pci_sleep_wake,
+	.run_wake = acpi_pci_run_wake,
+};
+
+/* ACPI bus type */
+static int acpi_pci_find_device(struct device *dev, acpi_handle *handle)
+{
+	struct pci_dev * pci_dev;
+	u64	addr;
+
+	pci_dev = to_pci_dev(dev);
+	/* Please ref to ACPI spec for the syntax of _ADR */
+	addr = (PCI_SLOT(pci_dev->devfn) << 16) | PCI_FUNC(pci_dev->devfn);
+	*handle = acpi_get_child(DEVICE_ACPI_HANDLE(dev->parent), addr);
+	if (!*handle)
+		return -ENODEV;
+	return 0;
+}
+
+static int acpi_pci_find_root_bridge(struct device *dev, acpi_handle *handle)
+{
+	int num;
+	unsigned int seg, bus;
+
+	/*
+	 * The string should be the same as root bridge's name
+	 * Please look at 'pci_scan_bus_parented'
+	 */
+	num = sscanf(dev_name(dev), "pci%04x:%02x", &seg, &bus);
+	if (num != 2)
+		return -ENODEV;
+	*handle = acpi_get_pci_rootbridge_handle(seg, bus);
+	if (!*handle)
+		return -ENODEV;
+	return 0;
+}
+
+static struct acpi_bus_type acpi_pci_bus = {
+	.bus = &pci_bus_type,
+	.find_device = acpi_pci_find_device,
+	.find_bridge = acpi_pci_find_root_bridge,
+};
+
+static int __init acpi_pci_init(void)
+{
+	int ret;
+
+	if (acpi_gbl_FADT.boot_flags & ACPI_FADT_NO_MSI) {
+		printk(KERN_INFO"ACPI FADT declares the system doesn't support MSI, so disable it\n");
+		pci_no_msi();
+	}
+
+	if (acpi_gbl_FADT.boot_flags & ACPI_FADT_NO_ASPM) {
+		printk(KERN_INFO"ACPI FADT declares the system doesn't support PCIe ASPM, so disable it\n");
+		pcie_no_aspm();
+	}
+
+	ret = register_acpi_bus_type(&acpi_pci_bus);
+	if (ret)
+		return 0;
+	pci_set_platform_pm(&acpi_pci_platform_pm);
+	return 0;
+}
+arch_initcall(acpi_pci_init);