[T106][ZXW-22]7520V3SCV2.01.01.02P42U09_VEC_V0.8_AP_VEC origin source commit
Change-Id: Ic6e05d89ecd62fc34f82b23dcf306c93764aec4b
diff --git a/ap/os/linux/linux-3.4.x/drivers/rtc/rtc-sa1100.c b/ap/os/linux/linux-3.4.x/drivers/rtc/rtc-sa1100.c
new file mode 100644
index 0000000..50a5c4a
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/drivers/rtc/rtc-sa1100.c
@@ -0,0 +1,376 @@
+/*
+ * Real Time Clock interface for StrongARM SA1x00 and XScale PXA2xx
+ *
+ * Copyright (c) 2000 Nils Faerber
+ *
+ * Based on rtc.c by Paul Gortmaker
+ *
+ * Original Driver by Nils Faerber <nils@kernelconcepts.de>
+ *
+ * Modifications from:
+ * CIH <cih@coventive.com>
+ * Nicolas Pitre <nico@fluxnic.net>
+ * Andrew Christian <andrew.christian@hp.com>
+ *
+ * Converted to the RTC subsystem and Driver Model
+ * by Richard Purdie <rpurdie@rpsys.net>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/rtc.h>
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/of.h>
+#include <linux/pm.h>
+#include <linux/bitops.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+
+#if defined(CONFIG_ARCH_PXA) || defined(CONFIG_ARCH_MMP)
+#include <mach/regs-rtc.h>
+#endif
+
+#define RTC_DEF_DIVIDER (32768 - 1)
+#define RTC_DEF_TRIM 0
+#define RTC_FREQ 1024
+
+struct sa1100_rtc {
+ spinlock_t lock;
+ int irq_1hz;
+ int irq_alarm;
+ struct rtc_device *rtc;
+ struct clk *clk;
+};
+
+static irqreturn_t sa1100_rtc_interrupt(int irq, void *dev_id)
+{
+ struct sa1100_rtc *info = dev_get_drvdata(dev_id);
+ struct rtc_device *rtc = info->rtc;
+ unsigned int rtsr;
+ unsigned long events = 0;
+
+ spin_lock(&info->lock);
+
+ rtsr = RTSR;
+ /* clear interrupt sources */
+ RTSR = 0;
+ /* Fix for a nasty initialization problem the in SA11xx RTSR register.
+ * See also the comments in sa1100_rtc_probe(). */
+ if (rtsr & (RTSR_ALE | RTSR_HZE)) {
+ /* This is the original code, before there was the if test
+ * above. This code does not clear interrupts that were not
+ * enabled. */
+ RTSR = (RTSR_AL | RTSR_HZ) & (rtsr >> 2);
+ } else {
+ /* For some reason, it is possible to enter this routine
+ * without interruptions enabled, it has been tested with
+ * several units (Bug in SA11xx chip?).
+ *
+ * This situation leads to an infinite "loop" of interrupt
+ * routine calling and as a result the processor seems to
+ * lock on its first call to open(). */
+ RTSR = RTSR_AL | RTSR_HZ;
+ }
+
+ /* clear alarm interrupt if it has occurred */
+ if (rtsr & RTSR_AL)
+ rtsr &= ~RTSR_ALE;
+ RTSR = rtsr & (RTSR_ALE | RTSR_HZE);
+
+ /* update irq data & counter */
+ if (rtsr & RTSR_AL)
+ events |= RTC_AF | RTC_IRQF;
+ if (rtsr & RTSR_HZ)
+ events |= RTC_UF | RTC_IRQF;
+
+ rtc_update_irq(rtc, 1, events);
+
+ spin_unlock(&info->lock);
+
+ return IRQ_HANDLED;
+}
+
+static int sa1100_rtc_open(struct device *dev)
+{
+ struct sa1100_rtc *info = dev_get_drvdata(dev);
+ struct rtc_device *rtc = info->rtc;
+ int ret;
+
+ ret = clk_prepare_enable(info->clk);
+ if (ret)
+ goto fail_clk;
+ ret = request_irq(info->irq_1hz, sa1100_rtc_interrupt, 0, "rtc 1Hz", dev);
+ if (ret) {
+ dev_err(dev, "IRQ %d already in use.\n", info->irq_1hz);
+ goto fail_ui;
+ }
+ ret = request_irq(info->irq_alarm, sa1100_rtc_interrupt, 0, "rtc Alrm", dev);
+ if (ret) {
+ dev_err(dev, "IRQ %d already in use.\n", info->irq_alarm);
+ goto fail_ai;
+ }
+ rtc->max_user_freq = RTC_FREQ;
+ rtc_irq_set_freq(rtc, NULL, RTC_FREQ);
+
+ return 0;
+
+ fail_ai:
+ free_irq(info->irq_1hz, dev);
+ fail_ui:
+ clk_disable_unprepare(info->clk);
+ fail_clk:
+ return ret;
+}
+
+static void sa1100_rtc_release(struct device *dev)
+{
+ struct sa1100_rtc *info = dev_get_drvdata(dev);
+
+ spin_lock_irq(&info->lock);
+ RTSR = 0;
+ spin_unlock_irq(&info->lock);
+
+ free_irq(info->irq_alarm, dev);
+ free_irq(info->irq_1hz, dev);
+ clk_disable_unprepare(info->clk);
+}
+
+static int sa1100_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+ struct sa1100_rtc *info = dev_get_drvdata(dev);
+
+ spin_lock_irq(&info->lock);
+ if (enabled)
+ RTSR |= RTSR_ALE;
+ else
+ RTSR &= ~RTSR_ALE;
+ spin_unlock_irq(&info->lock);
+ return 0;
+}
+
+static int sa1100_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+ rtc_time_to_tm(RCNR, tm);
+ return 0;
+}
+
+static int sa1100_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+ unsigned long time;
+ int ret;
+
+ ret = rtc_tm_to_time(tm, &time);
+ if (ret == 0)
+ RCNR = time;
+ return ret;
+}
+
+static int sa1100_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+ u32 rtsr;
+
+ rtsr = RTSR;
+ alrm->enabled = (rtsr & RTSR_ALE) ? 1 : 0;
+ alrm->pending = (rtsr & RTSR_AL) ? 1 : 0;
+ return 0;
+}
+
+static int sa1100_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+ struct sa1100_rtc *info = dev_get_drvdata(dev);
+ unsigned long time;
+ int ret;
+
+ spin_lock_irq(&info->lock);
+ ret = rtc_tm_to_time(&alrm->time, &time);
+ if (ret != 0)
+ goto out;
+ RTSR = RTSR & (RTSR_HZE|RTSR_ALE|RTSR_AL);
+ RTAR = time;
+ if (alrm->enabled)
+ RTSR |= RTSR_ALE;
+ else
+ RTSR &= ~RTSR_ALE;
+out:
+ spin_unlock_irq(&info->lock);
+
+ return ret;
+}
+
+static int sa1100_rtc_proc(struct device *dev, struct seq_file *seq)
+{
+ seq_printf(seq, "trim/divider\t\t: 0x%08x\n", (u32) RTTR);
+ seq_printf(seq, "RTSR\t\t\t: 0x%08x\n", (u32)RTSR);
+
+ return 0;
+}
+
+static const struct rtc_class_ops sa1100_rtc_ops = {
+ .open = sa1100_rtc_open,
+ .release = sa1100_rtc_release,
+ .read_time = sa1100_rtc_read_time,
+ .set_time = sa1100_rtc_set_time,
+ .read_alarm = sa1100_rtc_read_alarm,
+ .set_alarm = sa1100_rtc_set_alarm,
+ .proc = sa1100_rtc_proc,
+ .alarm_irq_enable = sa1100_rtc_alarm_irq_enable,
+};
+
+static int sa1100_rtc_probe(struct platform_device *pdev)
+{
+ struct rtc_device *rtc;
+ struct sa1100_rtc *info;
+ int irq_1hz, irq_alarm, ret = 0;
+
+ irq_1hz = platform_get_irq_byname(pdev, "rtc 1Hz");
+ irq_alarm = platform_get_irq_byname(pdev, "rtc alarm");
+ if (irq_1hz < 0 || irq_alarm < 0)
+ return -ENODEV;
+
+ info = kzalloc(sizeof(struct sa1100_rtc), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+ info->clk = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(info->clk)) {
+ dev_err(&pdev->dev, "failed to find rtc clock source\n");
+ ret = PTR_ERR(info->clk);
+ goto err_clk;
+ }
+ info->irq_1hz = irq_1hz;
+ info->irq_alarm = irq_alarm;
+ spin_lock_init(&info->lock);
+ platform_set_drvdata(pdev, info);
+
+ /*
+ * According to the manual we should be able to let RTTR be zero
+ * and then a default diviser for a 32.768KHz clock is used.
+ * Apparently this doesn't work, at least for my SA1110 rev 5.
+ * If the clock divider is uninitialized then reset it to the
+ * default value to get the 1Hz clock.
+ */
+ if (RTTR == 0) {
+ RTTR = RTC_DEF_DIVIDER + (RTC_DEF_TRIM << 16);
+ dev_warn(&pdev->dev, "warning: "
+ "initializing default clock divider/trim value\n");
+ /* The current RTC value probably doesn't make sense either */
+ RCNR = 0;
+ }
+
+ device_init_wakeup(&pdev->dev, 1);
+
+ rtc = rtc_device_register(pdev->name, &pdev->dev, &sa1100_rtc_ops,
+ THIS_MODULE);
+
+ if (IS_ERR(rtc)) {
+ ret = PTR_ERR(rtc);
+ goto err_dev;
+ }
+ info->rtc = rtc;
+
+ /* Fix for a nasty initialization problem the in SA11xx RTSR register.
+ * See also the comments in sa1100_rtc_interrupt().
+ *
+ * Sometimes bit 1 of the RTSR (RTSR_HZ) will wake up 1, which means an
+ * interrupt pending, even though interrupts were never enabled.
+ * In this case, this bit it must be reset before enabling
+ * interruptions to avoid a nonexistent interrupt to occur.
+ *
+ * In principle, the same problem would apply to bit 0, although it has
+ * never been observed to happen.
+ *
+ * This issue is addressed both here and in sa1100_rtc_interrupt().
+ * If the issue is not addressed here, in the times when the processor
+ * wakes up with the bit set there will be one spurious interrupt.
+ *
+ * The issue is also dealt with in sa1100_rtc_interrupt() to be on the
+ * safe side, once the condition that lead to this strange
+ * initialization is unknown and could in principle happen during
+ * normal processing.
+ *
+ * Notice that clearing bit 1 and 0 is accomplished by writting ONES to
+ * the corresponding bits in RTSR. */
+ RTSR = RTSR_AL | RTSR_HZ;
+
+ return 0;
+err_dev:
+ platform_set_drvdata(pdev, NULL);
+ clk_put(info->clk);
+err_clk:
+ kfree(info);
+ return ret;
+}
+
+static int sa1100_rtc_remove(struct platform_device *pdev)
+{
+ struct sa1100_rtc *info = platform_get_drvdata(pdev);
+
+ if (info) {
+ rtc_device_unregister(info->rtc);
+ clk_put(info->clk);
+ platform_set_drvdata(pdev, NULL);
+ kfree(info);
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int sa1100_rtc_suspend(struct device *dev)
+{
+ struct sa1100_rtc *info = dev_get_drvdata(dev);
+ if (device_may_wakeup(dev))
+ enable_irq_wake(info->irq_alarm);
+ return 0;
+}
+
+static int sa1100_rtc_resume(struct device *dev)
+{
+ struct sa1100_rtc *info = dev_get_drvdata(dev);
+ if (device_may_wakeup(dev))
+ disable_irq_wake(info->irq_alarm);
+ return 0;
+}
+
+static const struct dev_pm_ops sa1100_rtc_pm_ops = {
+ .suspend = sa1100_rtc_suspend,
+ .resume = sa1100_rtc_resume,
+};
+#endif
+
+static struct of_device_id sa1100_rtc_dt_ids[] = {
+ { .compatible = "mrvl,sa1100-rtc", },
+ { .compatible = "mrvl,mmp-rtc", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, sa1100_rtc_dt_ids);
+
+static struct platform_driver sa1100_rtc_driver = {
+ .probe = sa1100_rtc_probe,
+ .remove = sa1100_rtc_remove,
+ .driver = {
+ .name = "sa1100-rtc",
+#ifdef CONFIG_PM
+ .pm = &sa1100_rtc_pm_ops,
+#endif
+ .of_match_table = sa1100_rtc_dt_ids,
+ },
+};
+
+module_platform_driver(sa1100_rtc_driver);
+
+MODULE_AUTHOR("Richard Purdie <rpurdie@rpsys.net>");
+MODULE_DESCRIPTION("SA11x0/PXA2xx Realtime Clock Driver (RTC)");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:sa1100-rtc");