[T106][ZXW-22]7520V3SCV2.01.01.02P42U09_VEC_V0.8_AP_VEC origin source commit
Change-Id: Ic6e05d89ecd62fc34f82b23dcf306c93764aec4b
diff --git a/ap/os/linux/linux-3.4.x/include/sound/wm8962.h b/ap/os/linux/linux-3.4.x/include/sound/wm8962.h
new file mode 100644
index 0000000..79e6d42
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/include/sound/wm8962.h
@@ -0,0 +1,60 @@
+/*
+ * wm8962.h -- WM8962 Soc Audio driver platform data
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _WM8962_PDATA_H
+#define _WM8962_PDATA_H
+
+#define WM8962_MAX_GPIO 6
+
+/* Use to set GPIO default values to zero */
+#define WM8962_GPIO_SET 0x10000
+
+#define WM8962_GPIO_FN_CLKOUT 0
+#define WM8962_GPIO_FN_LOGIC 1
+#define WM8962_GPIO_FN_SDOUT 2
+#define WM8962_GPIO_FN_IRQ 3
+#define WM8962_GPIO_FN_THERMAL 4
+#define WM8962_GPIO_FN_PLL2_LOCK 6
+#define WM8962_GPIO_FN_PLL3_LOCK 7
+#define WM8962_GPIO_FN_FLL_LOCK 9
+#define WM8962_GPIO_FN_DRC_ACT 10
+#define WM8962_GPIO_FN_WSEQ_DONE 11
+#define WM8962_GPIO_FN_ALC_NG_ACT 12
+#define WM8962_GPIO_FN_ALC_PEAK_LIMIT 13
+#define WM8962_GPIO_FN_ALC_SATURATION 14
+#define WM8962_GPIO_FN_ALC_LEVEL_THR 15
+#define WM8962_GPIO_FN_ALC_LEVEL_LOCK 16
+#define WM8962_GPIO_FN_FIFO_ERR 17
+#define WM8962_GPIO_FN_OPCLK 18
+#define WM8962_GPIO_FN_DMICCLK 19
+#define WM8962_GPIO_FN_DMICDAT 20
+#define WM8962_GPIO_FN_MICD 21
+#define WM8962_GPIO_FN_MICSCD 22
+
+struct wm8962_pdata {
+ int gpio_base;
+ u32 gpio_init[WM8962_MAX_GPIO];
+
+ /* Setup for microphone detection, raw value to be written to
+ * R48(0x30) - only microphone related bits will be updated.
+ * Detection may be enabled here for use with signals brought
+ * out on the GPIOs. */
+ u32 mic_cfg;
+
+ bool irq_active_low;
+
+ bool spk_mono; /* Speaker outputs tied together as mono */
+
+ /**
+ * This flag should be set if one or both IN4 inputs is wired
+ * in a DC measurement configuration.
+ */
+ bool in4_dc_measure;
+};
+
+#endif