[T106][ZXW-22]7520V3SCV2.01.01.02P42U09_VEC_V0.8_AP_VEC origin source commit
Change-Id: Ic6e05d89ecd62fc34f82b23dcf306c93764aec4b
diff --git a/ap/os/linux/linux-3.4.x/init/Kconfig b/ap/os/linux/linux-3.4.x/init/Kconfig
new file mode 100644
index 0000000..3db3a51
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/init/Kconfig
@@ -0,0 +1,1454 @@
+config ARCH
+ string
+ option env="ARCH"
+
+config KERNELVERSION
+ string
+ option env="KERNELVERSION"
+
+config DEFCONFIG_LIST
+ string
+ depends on !UML
+ option defconfig_list
+ default "/lib/modules/$UNAME_RELEASE/.config"
+ default "/etc/kernel-config"
+ default "/boot/config-$UNAME_RELEASE"
+ default "$ARCH_DEFCONFIG"
+ default "arch/$ARCH/defconfig"
+
+config CONSTRUCTORS
+ bool
+ depends on !UML
+
+config HAVE_IRQ_WORK
+ bool
+
+config IRQ_WORK
+ bool
+ depends on HAVE_IRQ_WORK
+
+menu "General setup"
+
+config EXPERIMENTAL
+ bool "Prompt for development and/or incomplete code/drivers"
+ ---help---
+ Some of the various things that Linux supports (such as network
+ drivers, file systems, network protocols, etc.) can be in a state
+ of development where the functionality, stability, or the level of
+ testing is not yet high enough for general use. This is usually
+ known as the "alpha-test" phase among developers. If a feature is
+ currently in alpha-test, then the developers usually discourage
+ uninformed widespread use of this feature by the general public to
+ avoid "Why doesn't this work?" type mail messages. However, active
+ testing and use of these systems is welcomed. Just be aware that it
+ may not meet the normal level of reliability or it may fail to work
+ in some special cases. Detailed bug reports from people familiar
+ with the kernel internals are usually welcomed by the developers
+ (before submitting bug reports, please read the documents
+ <file:README>, <file:MAINTAINERS>, <file:REPORTING-BUGS>,
+ <file:Documentation/BUG-HUNTING>, and
+ <file:Documentation/oops-tracing.txt> in the kernel source).
+
+ This option will also make obsoleted drivers available. These are
+ drivers that have been replaced by something else, and/or are
+ scheduled to be removed in a future kernel release.
+
+ Unless you intend to help test and develop a feature or driver that
+ falls into this category, or you have a situation that requires
+ using these features, you should probably say N here, which will
+ cause the configurator to present you with fewer choices. If
+ you say Y here, you will be offered the choice of using features or
+ drivers that are currently considered to be in the alpha-test phase.
+
+config BROKEN
+ bool
+
+config BROKEN_ON_SMP
+ bool
+ depends on BROKEN || !SMP
+ default y
+
+config INIT_ENV_ARG_LIMIT
+ int
+ default 32 if !UML
+ default 128 if UML
+ help
+ Maximum of each of the number of arguments and environment
+ variables passed to init from the kernel command line.
+
+
+config CROSS_COMPILE
+ string "Cross-compiler tool prefix"
+ help
+ Same as running 'make CROSS_COMPILE=prefix-' but stored for
+ default make runs in this kernel build directory. You don't
+ need to set this unless you want the configured kernel build
+ directory to select the cross-compiler automatically.
+
+config LOCALVERSION
+ string "Local version - append to kernel release"
+ help
+ Append an extra string to the end of your kernel version.
+ This will show up when you type uname, for example.
+ The string you set here will be appended after the contents of
+ any files with a filename matching localversion* in your
+ object and source tree, in that order. Your total string can
+ be a maximum of 64 characters.
+
+config LOCALVERSION_AUTO
+ bool "Automatically append version information to the version string"
+ default y
+ help
+ This will try to automatically determine if the current tree is a
+ release tree by looking for git tags that belong to the current
+ top of tree revision.
+
+ A string of the format -gxxxxxxxx will be added to the localversion
+ if a git-based tree is found. The string generated by this will be
+ appended after any matching localversion* files, and after the value
+ set in CONFIG_LOCALVERSION.
+
+ (The actual string used here is the first eight characters produced
+ by running the command:
+
+ $ git rev-parse --verify HEAD
+
+ which is done within the script "scripts/setlocalversion".)
+
+config HAVE_KERNEL_GZIP
+ bool
+
+config HAVE_KERNEL_BZIP2
+ bool
+
+config HAVE_KERNEL_LZMA
+ bool
+
+config HAVE_KERNEL_XZ
+ bool
+
+config HAVE_KERNEL_LZO
+ bool
+
+choice
+ prompt "Kernel compression mode"
+ default KERNEL_GZIP
+ depends on HAVE_KERNEL_GZIP || HAVE_KERNEL_BZIP2 || HAVE_KERNEL_LZMA || HAVE_KERNEL_XZ || HAVE_KERNEL_LZO
+ help
+ The linux kernel is a kind of self-extracting executable.
+ Several compression algorithms are available, which differ
+ in efficiency, compression and decompression speed.
+ Compression speed is only relevant when building a kernel.
+ Decompression speed is relevant at each boot.
+
+ If you have any problems with bzip2 or lzma compressed
+ kernels, mail me (Alain Knaff) <alain@knaff.lu>. (An older
+ version of this functionality (bzip2 only), for 2.4, was
+ supplied by Christian Ludwig)
+
+ High compression options are mostly useful for users, who
+ are low on disk space (embedded systems), but for whom ram
+ size matters less.
+
+ If in doubt, select 'gzip'
+
+config KERNEL_GZIP
+ bool "Gzip"
+ depends on HAVE_KERNEL_GZIP
+ help
+ The old and tried gzip compression. It provides a good balance
+ between compression ratio and decompression speed.
+
+config KERNEL_BZIP2
+ bool "Bzip2"
+ depends on HAVE_KERNEL_BZIP2
+ help
+ Its compression ratio and speed is intermediate.
+ Decompression speed is slowest among the three. The kernel
+ size is about 10% smaller with bzip2, in comparison to gzip.
+ Bzip2 uses a large amount of memory. For modern kernels you
+ will need at least 8MB RAM or more for booting.
+
+config KERNEL_LZMA
+ bool "LZMA"
+ depends on HAVE_KERNEL_LZMA
+ help
+ The most recent compression algorithm.
+ Its ratio is best, decompression speed is between the other
+ two. Compression is slowest. The kernel size is about 33%
+ smaller with LZMA in comparison to gzip.
+
+config KERNEL_XZ
+ bool "XZ"
+ depends on HAVE_KERNEL_XZ
+ help
+ XZ uses the LZMA2 algorithm and instruction set specific
+ BCJ filters which can improve compression ratio of executable
+ code. The size of the kernel is about 30% smaller with XZ in
+ comparison to gzip. On architectures for which there is a BCJ
+ filter (i386, x86_64, ARM, IA-64, PowerPC, and SPARC), XZ
+ will create a few percent smaller kernel than plain LZMA.
+
+ The speed is about the same as with LZMA: The decompression
+ speed of XZ is better than that of bzip2 but worse than gzip
+ and LZO. Compression is slow.
+
+config KERNEL_LZO
+ bool "LZO"
+ depends on HAVE_KERNEL_LZO
+ help
+ Its compression ratio is the poorest among the 4. The kernel
+ size is about 10% bigger than gzip; however its speed
+ (both compression and decompression) is the fastest.
+
+endchoice
+
+config DEFAULT_HOSTNAME
+ string "Default hostname"
+ default "(none)"
+ help
+ This option determines the default system hostname before userspace
+ calls sethostname(2). The kernel traditionally uses "(none)" here,
+ but you may wish to use a different default here to make a minimal
+ system more usable with less configuration.
+
+config SWAP
+ bool "Support for paging of anonymous memory (swap)"
+ depends on MMU && BLOCK
+ default y
+ help
+ This option allows you to choose whether you want to have support
+ for so called swap devices or swap files in your kernel that are
+ used to provide more virtual memory than the actual RAM present
+ in your computer. If unsure say Y.
+
+config SYSVIPC
+ bool "System V IPC"
+ ---help---
+ Inter Process Communication is a suite of library functions and
+ system calls which let processes (running programs) synchronize and
+ exchange information. It is generally considered to be a good thing,
+ and some programs won't run unless you say Y here. In particular, if
+ you want to run the DOS emulator dosemu under Linux (read the
+ DOSEMU-HOWTO, available from <http://www.tldp.org/docs.html#howto>),
+ you'll need to say Y here.
+
+ You can find documentation about IPC with "info ipc" and also in
+ section 6.4 of the Linux Programmer's Guide, available from
+ <http://www.tldp.org/guides.html>.
+
+config SYSVIPC_SYSCTL
+ bool
+ depends on SYSVIPC
+ depends on SYSCTL
+ default y
+
+config POSIX_MQUEUE
+ bool "POSIX Message Queues"
+ depends on NET && EXPERIMENTAL
+ ---help---
+ POSIX variant of message queues is a part of IPC. In POSIX message
+ queues every message has a priority which decides about succession
+ of receiving it by a process. If you want to compile and run
+ programs written e.g. for Solaris with use of its POSIX message
+ queues (functions mq_*) say Y here.
+
+ POSIX message queues are visible as a filesystem called 'mqueue'
+ and can be mounted somewhere if you want to do filesystem
+ operations on message queues.
+
+ If unsure, say Y.
+
+config POSIX_MQUEUE_SYSCTL
+ bool
+ depends on POSIX_MQUEUE
+ depends on SYSCTL
+ default y
+
+config BSD_PROCESS_ACCT
+ bool "BSD Process Accounting"
+ help
+ If you say Y here, a user level program will be able to instruct the
+ kernel (via a special system call) to write process accounting
+ information to a file: whenever a process exits, information about
+ that process will be appended to the file by the kernel. The
+ information includes things such as creation time, owning user,
+ command name, memory usage, controlling terminal etc. (the complete
+ list is in the struct acct in <file:include/linux/acct.h>). It is
+ up to the user level program to do useful things with this
+ information. This is generally a good idea, so say Y.
+
+config BSD_PROCESS_ACCT_V3
+ bool "BSD Process Accounting version 3 file format"
+ depends on BSD_PROCESS_ACCT
+ default n
+ help
+ If you say Y here, the process accounting information is written
+ in a new file format that also logs the process IDs of each
+ process and it's parent. Note that this file format is incompatible
+ with previous v0/v1/v2 file formats, so you will need updated tools
+ for processing it. A preliminary version of these tools is available
+ at <http://www.gnu.org/software/acct/>.
+
+config FHANDLE
+ bool "open by fhandle syscalls"
+ select EXPORTFS
+ help
+ If you say Y here, a user level program will be able to map
+ file names to handle and then later use the handle for
+ different file system operations. This is useful in implementing
+ userspace file servers, which now track files using handles instead
+ of names. The handle would remain the same even if file names
+ get renamed. Enables open_by_handle_at(2) and name_to_handle_at(2)
+ syscalls.
+
+config TASKSTATS
+ bool "Export task/process statistics through netlink (EXPERIMENTAL)"
+ depends on NET
+ default n
+ help
+ Export selected statistics for tasks/processes through the
+ generic netlink interface. Unlike BSD process accounting, the
+ statistics are available during the lifetime of tasks/processes as
+ responses to commands. Like BSD accounting, they are sent to user
+ space on task exit.
+
+ Say N if unsure.
+
+config TASK_DELAY_ACCT
+ bool "Enable per-task delay accounting (EXPERIMENTAL)"
+ depends on TASKSTATS
+ help
+ Collect information on time spent by a task waiting for system
+ resources like cpu, synchronous block I/O completion and swapping
+ in pages. Such statistics can help in setting a task's priorities
+ relative to other tasks for cpu, io, rss limits etc.
+
+ Say N if unsure.
+
+config TASK_XACCT
+ bool "Enable extended accounting over taskstats (EXPERIMENTAL)"
+ depends on TASKSTATS
+ help
+ Collect extended task accounting data and send the data
+ to userland for processing over the taskstats interface.
+
+ Say N if unsure.
+
+config TASK_IO_ACCOUNTING
+ bool "Enable per-task storage I/O accounting (EXPERIMENTAL)"
+ depends on TASK_XACCT
+ help
+ Collect information on the number of bytes of storage I/O which this
+ task has caused.
+
+ Say N if unsure.
+
+config AUDIT
+ bool "Auditing support"
+ depends on NET
+ help
+ Enable auditing infrastructure that can be used with another
+ kernel subsystem, such as SELinux (which requires this for
+ logging of avc messages output). Does not do system-call
+ auditing without CONFIG_AUDITSYSCALL.
+
+config AUDITSYSCALL
+ bool "Enable system-call auditing support"
+ depends on AUDIT && (X86 || PPC || S390 || IA64 || UML || SPARC64 || SUPERH || ARM)
+ default y if SECURITY_SELINUX
+ help
+ Enable low-overhead system-call auditing infrastructure that
+ can be used independently or with another kernel subsystem,
+ such as SELinux.
+
+config AUDIT_WATCH
+ def_bool y
+ depends on AUDITSYSCALL
+ select FSNOTIFY
+
+config AUDIT_TREE
+ def_bool y
+ depends on AUDITSYSCALL
+ select FSNOTIFY
+
+config AUDIT_LOGINUID_IMMUTABLE
+ bool "Make audit loginuid immutable"
+ depends on AUDIT
+ help
+ The config option toggles if a task setting its loginuid requires
+ CAP_SYS_AUDITCONTROL or if that task should require no special permissions
+ but should instead only allow setting its loginuid if it was never
+ previously set. On systems which use systemd or a similar central
+ process to restart login services this should be set to true. On older
+ systems in which an admin would typically have to directly stop and
+ start processes this should be set to false. Setting this to true allows
+ one to drop potentially dangerous capabilites from the login tasks,
+ but may not be backwards compatible with older init systems.
+
+source "kernel/irq/Kconfig"
+
+menu "RCU Subsystem"
+
+choice
+ prompt "RCU Implementation"
+ default TREE_RCU
+
+config TREE_RCU
+ bool "Tree-based hierarchical RCU"
+ depends on !PREEMPT && SMP
+ help
+ This option selects the RCU implementation that is
+ designed for very large SMP system with hundreds or
+ thousands of CPUs. It also scales down nicely to
+ smaller systems.
+
+config TREE_PREEMPT_RCU
+ bool "Preemptible tree-based hierarchical RCU"
+ depends on PREEMPT && SMP
+ help
+ This option selects the RCU implementation that is
+ designed for very large SMP systems with hundreds or
+ thousands of CPUs, but for which real-time response
+ is also required. It also scales down nicely to
+ smaller systems.
+
+config TINY_RCU
+ bool "UP-only small-memory-footprint RCU"
+ depends on !PREEMPT && !SMP
+ help
+ This option selects the RCU implementation that is
+ designed for UP systems from which real-time response
+ is not required. This option greatly reduces the
+ memory footprint of RCU.
+
+config TINY_PREEMPT_RCU
+ bool "Preemptible UP-only small-memory-footprint RCU"
+ depends on PREEMPT && !SMP
+ help
+ This option selects the RCU implementation that is designed
+ for real-time UP systems. This option greatly reduces the
+ memory footprint of RCU.
+
+endchoice
+
+config PREEMPT_RCU
+ def_bool ( TREE_PREEMPT_RCU || TINY_PREEMPT_RCU )
+ help
+ This option enables preemptible-RCU code that is common between
+ the TREE_PREEMPT_RCU and TINY_PREEMPT_RCU implementations.
+
+config RCU_FANOUT
+ int "Tree-based hierarchical RCU fanout value"
+ range 2 64 if 64BIT
+ range 2 32 if !64BIT
+ depends on TREE_RCU || TREE_PREEMPT_RCU
+ default 64 if 64BIT
+ default 32 if !64BIT
+ help
+ This option controls the fanout of hierarchical implementations
+ of RCU, allowing RCU to work efficiently on machines with
+ large numbers of CPUs. This value must be at least the fourth
+ root of NR_CPUS, which allows NR_CPUS to be insanely large.
+ The default value of RCU_FANOUT should be used for production
+ systems, but if you are stress-testing the RCU implementation
+ itself, small RCU_FANOUT values allow you to test large-system
+ code paths on small(er) systems.
+
+ Select a specific number if testing RCU itself.
+ Take the default if unsure.
+
+config RCU_FANOUT_EXACT
+ bool "Disable tree-based hierarchical RCU auto-balancing"
+ depends on TREE_RCU || TREE_PREEMPT_RCU
+ default n
+ help
+ This option forces use of the exact RCU_FANOUT value specified,
+ regardless of imbalances in the hierarchy. This is useful for
+ testing RCU itself, and might one day be useful on systems with
+ strong NUMA behavior.
+
+ Without RCU_FANOUT_EXACT, the code will balance the hierarchy.
+
+ Say N if unsure.
+
+config RCU_FAST_NO_HZ
+ bool "Accelerate last non-dyntick-idle CPU's grace periods"
+ depends on NO_HZ && SMP && !PREEMPT_RT_FULL
+ default n
+ help
+ This option causes RCU to attempt to accelerate grace periods
+ in order to allow CPUs to enter dynticks-idle state more
+ quickly. On the other hand, this option increases the overhead
+ of the dynticks-idle checking, particularly on systems with
+ large numbers of CPUs.
+
+ Say Y if energy efficiency is critically important, particularly
+ if you have relatively few CPUs.
+
+ Say N if you are unsure.
+
+config TREE_RCU_TRACE
+ def_bool RCU_TRACE && ( TREE_RCU || TREE_PREEMPT_RCU )
+ select DEBUG_FS
+ help
+ This option provides tracing for the TREE_RCU and
+ TREE_PREEMPT_RCU implementations, permitting Makefile to
+ trivially select kernel/rcutree_trace.c.
+
+config RCU_BOOST
+ bool "Enable RCU priority boosting"
+ depends on RT_MUTEXES && PREEMPT_RCU
+ default y if PREEMPT_RT_FULL
+ help
+ This option boosts the priority of preempted RCU readers that
+ block the current preemptible RCU grace period for too long.
+ This option also prevents heavy loads from blocking RCU
+ callback invocation for all flavors of RCU.
+
+ Say Y here if you are working with real-time apps or heavy loads
+ Say N here if you are unsure.
+
+config RCU_BOOST_PRIO
+ int "Real-time priority to boost RCU readers to"
+ range 1 99
+ depends on RCU_BOOST
+ default 1
+ help
+ This option specifies the real-time priority to which preempted
+ RCU readers are to be boosted. If you are working with CPU-bound
+ real-time applications, you should specify a priority higher then
+ the highest-priority CPU-bound application.
+
+ Specify the real-time priority, or take the default if unsure.
+
+config RCU_BOOST_DELAY
+ int "Milliseconds to delay boosting after RCU grace-period start"
+ range 0 3000
+ depends on RCU_BOOST
+ default 500
+ help
+ This option specifies the time to wait after the beginning of
+ a given grace period before priority-boosting preempted RCU
+ readers blocking that grace period. Note that any RCU reader
+ blocking an expedited RCU grace period is boosted immediately.
+
+ Accept the default if unsure.
+
+endmenu # "RCU Subsystem"
+
+config IKCONFIG
+ tristate "Kernel .config support"
+ ---help---
+ This option enables the complete Linux kernel ".config" file
+ contents to be saved in the kernel. It provides documentation
+ of which kernel options are used in a running kernel or in an
+ on-disk kernel. This information can be extracted from the kernel
+ image file with the script scripts/extract-ikconfig and used as
+ input to rebuild the current kernel or to build another kernel.
+ It can also be extracted from a running kernel by reading
+ /proc/config.gz if enabled (below).
+
+config IKCONFIG_PROC
+ bool "Enable access to .config through /proc/config.gz"
+ depends on IKCONFIG && PROC_FS
+ ---help---
+ This option enables access to the kernel configuration file
+ through /proc/config.gz.
+
+config LOG_BUF_SHIFT
+ int "Kernel log buffer size (16 => 64KB, 17 => 128KB)"
+ range 12 21
+ default 17
+ depends on PRINTK
+ help
+ Select kernel log buffer size as a power of 2.
+ Examples:
+ 17 => 128 KB
+ 16 => 64 KB
+ 15 => 32 KB
+ 14 => 16 KB
+ 13 => 8 KB
+ 12 => 4 KB
+
+#
+# Architectures with an unreliable sched_clock() should select this:
+#
+config HAVE_UNSTABLE_SCHED_CLOCK
+ bool
+
+menuconfig CGROUPS
+ boolean "Control Group support"
+ depends on EVENTFD
+ help
+ This option adds support for grouping sets of processes together, for
+ use with process control subsystems such as Cpusets, CFS, memory
+ controls or device isolation.
+ See
+ - Documentation/scheduler/sched-design-CFS.txt (CFS)
+ - Documentation/cgroups/ (features for grouping, isolation
+ and resource control)
+
+ Say N if unsure.
+
+if CGROUPS
+
+config CGROUP_DEBUG
+ bool "Example debug cgroup subsystem"
+ default n
+ help
+ This option enables a simple cgroup subsystem that
+ exports useful debugging information about the cgroups
+ framework.
+
+ Say N if unsure.
+
+config CGROUP_FREEZER
+ bool "Freezer cgroup subsystem"
+ help
+ Provides a way to freeze and unfreeze all tasks in a
+ cgroup.
+
+config CGROUP_DEVICE
+ bool "Device controller for cgroups"
+ help
+ Provides a cgroup implementing whitelists for devices which
+ a process in the cgroup can mknod or open.
+
+config CPUSETS
+ bool "Cpuset support"
+ help
+ This option will let you create and manage CPUSETs which
+ allow dynamically partitioning a system into sets of CPUs and
+ Memory Nodes and assigning tasks to run only within those sets.
+ This is primarily useful on large SMP or NUMA systems.
+
+ Say N if unsure.
+
+config PROC_PID_CPUSET
+ bool "Include legacy /proc/<pid>/cpuset file"
+ depends on CPUSETS
+ default y
+
+config CGROUP_CPUACCT
+ bool "Simple CPU accounting cgroup subsystem"
+ help
+ Provides a simple Resource Controller for monitoring the
+ total CPU consumed by the tasks in a cgroup.
+
+config RESOURCE_COUNTERS
+ bool "Resource counters"
+ help
+ This option enables controller independent resource accounting
+ infrastructure that works with cgroups.
+
+config CGROUP_MEM_RES_CTLR
+ bool "Memory Resource Controller for Control Groups"
+ depends on RESOURCE_COUNTERS
+ select MM_OWNER
+ help
+ Provides a memory resource controller that manages both anonymous
+ memory and page cache. (See Documentation/cgroups/memory.txt)
+
+ Note that setting this option increases fixed memory overhead
+ associated with each page of memory in the system. By this,
+ 20(40)bytes/PAGE_SIZE on 32(64)bit system will be occupied by memory
+ usage tracking struct at boot. Total amount of this is printed out
+ at boot.
+
+ Only enable when you're ok with these trade offs and really
+ sure you need the memory resource controller. Even when you enable
+ this, you can set "cgroup_disable=memory" at your boot option to
+ disable memory resource controller and you can avoid overheads.
+ (and lose benefits of memory resource controller)
+
+ This config option also selects MM_OWNER config option, which
+ could in turn add some fork/exit overhead.
+
+config CGROUP_MEM_RES_CTLR_SWAP
+ bool "Memory Resource Controller Swap Extension"
+ depends on CGROUP_MEM_RES_CTLR && SWAP
+ help
+ Add swap management feature to memory resource controller. When you
+ enable this, you can limit mem+swap usage per cgroup. In other words,
+ when you disable this, memory resource controller has no cares to
+ usage of swap...a process can exhaust all of the swap. This extension
+ is useful when you want to avoid exhaustion swap but this itself
+ adds more overheads and consumes memory for remembering information.
+ Especially if you use 32bit system or small memory system, please
+ be careful about enabling this. When memory resource controller
+ is disabled by boot option, this will be automatically disabled and
+ there will be no overhead from this. Even when you set this config=y,
+ if boot option "swapaccount=0" is set, swap will not be accounted.
+ Now, memory usage of swap_cgroup is 2 bytes per entry. If swap page
+ size is 4096bytes, 512k per 1Gbytes of swap.
+config CGROUP_MEM_RES_CTLR_SWAP_ENABLED
+ bool "Memory Resource Controller Swap Extension enabled by default"
+ depends on CGROUP_MEM_RES_CTLR_SWAP
+ default y
+ help
+ Memory Resource Controller Swap Extension comes with its price in
+ a bigger memory consumption. General purpose distribution kernels
+ which want to enable the feature but keep it disabled by default
+ and let the user enable it by swapaccount boot command line
+ parameter should have this option unselected.
+ For those who want to have the feature enabled by default should
+ select this option (if, for some reason, they need to disable it
+ then swapaccount=0 does the trick).
+config CGROUP_MEM_RES_CTLR_KMEM
+ bool "Memory Resource Controller Kernel Memory accounting (EXPERIMENTAL)"
+ depends on CGROUP_MEM_RES_CTLR && EXPERIMENTAL
+ default n
+ help
+ The Kernel Memory extension for Memory Resource Controller can limit
+ the amount of memory used by kernel objects in the system. Those are
+ fundamentally different from the entities handled by the standard
+ Memory Controller, which are page-based, and can be swapped. Users of
+ the kmem extension can use it to guarantee that no group of processes
+ will ever exhaust kernel resources alone.
+
+config CGROUP_PERF
+ bool "Enable perf_event per-cpu per-container group (cgroup) monitoring"
+ depends on PERF_EVENTS && CGROUPS
+ help
+ This option extends the per-cpu mode to restrict monitoring to
+ threads which belong to the cgroup specified and run on the
+ designated cpu.
+
+ Say N if unsure.
+
+menuconfig CGROUP_SCHED
+ bool "Group CPU scheduler"
+ default n
+ help
+ This feature lets CPU scheduler recognize task groups and control CPU
+ bandwidth allocation to such task groups. It uses cgroups to group
+ tasks.
+
+if CGROUP_SCHED
+config FAIR_GROUP_SCHED
+ bool "Group scheduling for SCHED_OTHER"
+ depends on CGROUP_SCHED
+ default CGROUP_SCHED
+
+config CFS_BANDWIDTH
+ bool "CPU bandwidth provisioning for FAIR_GROUP_SCHED"
+ depends on EXPERIMENTAL
+ depends on FAIR_GROUP_SCHED
+ default n
+ help
+ This option allows users to define CPU bandwidth rates (limits) for
+ tasks running within the fair group scheduler. Groups with no limit
+ set are considered to be unconstrained and will run with no
+ restriction.
+ See tip/Documentation/scheduler/sched-bwc.txt for more information.
+
+config RT_GROUP_SCHED
+ bool "Group scheduling for SCHED_RR/FIFO"
+ depends on EXPERIMENTAL
+ depends on CGROUP_SCHED
+ depends on !PREEMPT_RT_FULL
+ default n
+ help
+ This feature lets you explicitly allocate real CPU bandwidth
+ to task groups. If enabled, it will also make it impossible to
+ schedule realtime tasks for non-root users until you allocate
+ realtime bandwidth for them.
+ See Documentation/scheduler/sched-rt-group.txt for more information.
+
+endif #CGROUP_SCHED
+
+config BLK_CGROUP
+ tristate "Block IO controller"
+ depends on BLOCK
+ default n
+ ---help---
+ Generic block IO controller cgroup interface. This is the common
+ cgroup interface which should be used by various IO controlling
+ policies.
+
+ Currently, CFQ IO scheduler uses it to recognize task groups and
+ control disk bandwidth allocation (proportional time slice allocation)
+ to such task groups. It is also used by bio throttling logic in
+ block layer to implement upper limit in IO rates on a device.
+
+ This option only enables generic Block IO controller infrastructure.
+ One needs to also enable actual IO controlling logic/policy. For
+ enabling proportional weight division of disk bandwidth in CFQ, set
+ CONFIG_CFQ_GROUP_IOSCHED=y; for enabling throttling policy, set
+ CONFIG_BLK_DEV_THROTTLING=y.
+
+ See Documentation/cgroups/blkio-controller.txt for more information.
+
+config DEBUG_BLK_CGROUP
+ bool "Enable Block IO controller debugging"
+ depends on BLK_CGROUP
+ default n
+ ---help---
+ Enable some debugging help. Currently it exports additional stat
+ files in a cgroup which can be useful for debugging.
+
+endif # CGROUPS
+
+config CHECKPOINT_RESTORE
+ bool "Checkpoint/restore support" if EXPERT
+ default n
+ help
+ Enables additional kernel features in a sake of checkpoint/restore.
+ In particular it adds auxiliary prctl codes to setup process text,
+ data and heap segment sizes, and a few additional /proc filesystem
+ entries.
+
+ If unsure, say N here.
+
+menuconfig NAMESPACES
+ bool "Namespaces support" if EXPERT
+ default !EXPERT
+ help
+ Provides the way to make tasks work with different objects using
+ the same id. For example same IPC id may refer to different objects
+ or same user id or pid may refer to different tasks when used in
+ different namespaces.
+
+if NAMESPACES
+
+config UTS_NS
+ bool "UTS namespace"
+ default y
+ help
+ In this namespace tasks see different info provided with the
+ uname() system call
+
+config IPC_NS
+ bool "IPC namespace"
+ depends on (SYSVIPC || POSIX_MQUEUE)
+ default y
+ help
+ In this namespace tasks work with IPC ids which correspond to
+ different IPC objects in different namespaces.
+
+config USER_NS
+ bool "User namespace (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ default y
+ help
+ This allows containers, i.e. vservers, to use user namespaces
+ to provide different user info for different servers.
+ If unsure, say N.
+
+config PID_NS
+ bool "PID Namespaces"
+ default y
+ help
+ Support process id namespaces. This allows having multiple
+ processes with the same pid as long as they are in different
+ pid namespaces. This is a building block of containers.
+
+config NET_NS
+ bool "Network namespace"
+ depends on NET
+ default y
+ help
+ Allow user space to create what appear to be multiple instances
+ of the network stack.
+
+endif # NAMESPACES
+
+config SCHED_AUTOGROUP
+ bool "Automatic process group scheduling"
+ select EVENTFD
+ select CGROUPS
+ select CGROUP_SCHED
+ select FAIR_GROUP_SCHED
+ help
+ This option optimizes the scheduler for common desktop workloads by
+ automatically creating and populating task groups. This separation
+ of workloads isolates aggressive CPU burners (like build jobs) from
+ desktop applications. Task group autogeneration is currently based
+ upon task session.
+
+config MM_OWNER
+ bool
+
+config SYSFS_DEPRECATED
+ bool "Enable deprecated sysfs features to support old userspace tools"
+ depends on SYSFS
+ default n
+ help
+ This option adds code that switches the layout of the "block" class
+ devices, to not show up in /sys/class/block/, but only in
+ /sys/block/.
+
+ This switch is only active when the sysfs.deprecated=1 boot option is
+ passed or the SYSFS_DEPRECATED_V2 option is set.
+
+ This option allows new kernels to run on old distributions and tools,
+ which might get confused by /sys/class/block/. Since 2007/2008 all
+ major distributions and tools handle this just fine.
+
+ Recent distributions and userspace tools after 2009/2010 depend on
+ the existence of /sys/class/block/, and will not work with this
+ option enabled.
+
+ Only if you are using a new kernel on an old distribution, you might
+ need to say Y here.
+
+config SYSFS_DEPRECATED_V2
+ bool "Enable deprecated sysfs features by default"
+ default n
+ depends on SYSFS
+ depends on SYSFS_DEPRECATED
+ help
+ Enable deprecated sysfs by default.
+
+ See the CONFIG_SYSFS_DEPRECATED option for more details about this
+ option.
+
+ Only if you are using a new kernel on an old distribution, you might
+ need to say Y here. Even then, odds are you would not need it
+ enabled, you can always pass the boot option if absolutely necessary.
+
+config RELAY
+ bool "Kernel->user space relay support (formerly relayfs)"
+ help
+ This option enables support for relay interface support in
+ certain file systems (such as debugfs).
+ It is designed to provide an efficient mechanism for tools and
+ facilities to relay large amounts of data from kernel space to
+ user space.
+
+ If unsure, say N.
+
+config BLK_DEV_INITRD
+ bool "Initial RAM filesystem and RAM disk (initramfs/initrd) support"
+ depends on BROKEN || !FRV
+ help
+ The initial RAM filesystem is a ramfs which is loaded by the
+ boot loader (loadlin or lilo) and that is mounted as root
+ before the normal boot procedure. It is typically used to
+ load modules needed to mount the "real" root file system,
+ etc. See <file:Documentation/initrd.txt> for details.
+
+ If RAM disk support (BLK_DEV_RAM) is also included, this
+ also enables initial RAM disk (initrd) support and adds
+ 15 Kbytes (more on some other architectures) to the kernel size.
+
+ If unsure say Y.
+
+if BLK_DEV_INITRD
+
+source "usr/Kconfig"
+
+endif
+
+config CC_OPTIMIZE_FOR_SIZE
+ bool "Optimize for size"
+ help
+ Enabling this option will pass "-Os" instead of "-O2" to gcc
+ resulting in a smaller kernel.
+
+ If unsure, say Y.
+
+config SYSCTL
+ bool
+
+config ANON_INODES
+ bool
+
+config PANIC_TIMEOUT
+ int "Default panic timeout"
+ default 0
+ help
+ Set default panic timeout.
+
+menuconfig EXPERT
+ bool "Configure standard kernel features (expert users)"
+ # Unhide debug options, to make the on-by-default options visible
+ select DEBUG_KERNEL
+ help
+ This option allows certain base kernel options and settings
+ to be disabled or tweaked. This is for specialized
+ environments which can tolerate a "non-standard" kernel.
+ Only use this if you really know what you are doing.
+
+config UID16
+ bool "Enable 16-bit UID system calls" if EXPERT
+ depends on ARM || BLACKFIN || CRIS || FRV || H8300 || X86_32 || M68K || (S390 && !64BIT) || SUPERH || SPARC32 || (SPARC64 && COMPAT) || UML || (X86_64 && IA32_EMULATION)
+ default y
+ help
+ This enables the legacy 16-bit UID syscall wrappers.
+
+config SYSCTL_SYSCALL
+ bool "Sysctl syscall support" if EXPERT
+ depends on PROC_SYSCTL
+ default n
+ select SYSCTL
+ ---help---
+ sys_sysctl uses binary paths that have been found challenging
+ to properly maintain and use. The interface in /proc/sys
+ using paths with ascii names is now the primary path to this
+ information.
+
+ Almost nothing using the binary sysctl interface so if you are
+ trying to save some space it is probably safe to disable this,
+ making your kernel marginally smaller.
+
+ If unsure say N here.
+
+config KALLSYMS
+ bool "Load all symbols for debugging/ksymoops" if EXPERT
+ default y
+ help
+ Say Y here to let the kernel print out symbolic crash information and
+ symbolic stack backtraces. This increases the size of the kernel
+ somewhat, as all symbols have to be loaded into the kernel image.
+
+config KALLSYMS_ALL
+ bool "Include all symbols in kallsyms"
+ depends on DEBUG_KERNEL && KALLSYMS
+ help
+ Normally kallsyms only contains the symbols of functions for nicer
+ OOPS messages and backtraces (i.e., symbols from the text and inittext
+ sections). This is sufficient for most cases. And only in very rare
+ cases (e.g., when a debugger is used) all symbols are required (e.g.,
+ names of variables from the data sections, etc).
+
+ This option makes sure that all symbols are loaded into the kernel
+ image (i.e., symbols from all sections) in cost of increased kernel
+ size (depending on the kernel configuration, it may be 300KiB or
+ something like this).
+
+ Say N unless you really need all symbols.
+
+config HOTPLUG
+ bool "Support for hot-pluggable devices" if EXPERT
+ default y
+ help
+ This option is provided for the case where no hotplug or uevent
+ capabilities is wanted by the kernel. You should only consider
+ disabling this option for embedded systems that do not use modules, a
+ dynamic /dev tree, or dynamic device discovery. Just say Y.
+
+config PRINTK
+ default y
+ bool "Enable support for printk" if EXPERT
+ help
+ This option enables normal printk support. Removing it
+ eliminates most of the message strings from the kernel image
+ and makes the kernel more or less silent. As this makes it
+ very difficult to diagnose system problems, saying N here is
+ strongly discouraged.
+
+config BUG
+ bool "BUG() support" if EXPERT
+ default y
+ help
+ Disabling this option eliminates support for BUG and WARN, reducing
+ the size of your kernel image and potentially quietly ignoring
+ numerous fatal conditions. You should only consider disabling this
+ option for embedded systems with no facilities for reporting errors.
+ Just say Y.
+
+config ELF_CORE
+ default y
+ bool "Enable ELF core dumps" if EXPERT
+ help
+ Enable support for generating core dumps. Disabling saves about 4k.
+
+
+config PCSPKR_PLATFORM
+ bool "Enable PC-Speaker support" if EXPERT
+ depends on HAVE_PCSPKR_PLATFORM
+ select I8253_LOCK
+ default y
+ help
+ This option allows to disable the internal PC-Speaker
+ support, saving some memory.
+
+config HAVE_PCSPKR_PLATFORM
+ bool
+
+config BASE_FULL
+ default y
+ bool "Enable full-sized data structures for core" if EXPERT
+ help
+ Disabling this option reduces the size of miscellaneous core
+ kernel data structures. This saves memory on small machines,
+ but may reduce performance.
+
+config FUTEX
+ bool "Enable futex support" if EXPERT
+ default y
+ select RT_MUTEXES
+ help
+ Disabling this option will cause the kernel to be built without
+ support for "fast userspace mutexes". The resulting kernel may not
+ run glibc-based applications correctly.
+
+config EPOLL
+ bool "Enable eventpoll support" if EXPERT
+ default y
+ select ANON_INODES
+ help
+ Disabling this option will cause the kernel to be built without
+ support for epoll family of system calls.
+
+config SIGNALFD
+ bool "Enable signalfd() system call" if EXPERT
+ select ANON_INODES
+ default y
+ help
+ Enable the signalfd() system call that allows to receive signals
+ on a file descriptor.
+
+ If unsure, say Y.
+
+config TIMERFD
+ bool "Enable timerfd() system call" if EXPERT
+ select ANON_INODES
+ default y
+ help
+ Enable the timerfd() system call that allows to receive timer
+ events on a file descriptor.
+
+ If unsure, say Y.
+
+config EVENTFD
+ bool "Enable eventfd() system call" if EXPERT
+ select ANON_INODES
+ default y
+ help
+ Enable the eventfd() system call that allows to receive both
+ kernel notification (ie. KAIO) or userspace notifications.
+
+ If unsure, say Y.
+
+config SHMEM
+ bool "Use full shmem filesystem" if EXPERT
+ default y
+ depends on MMU
+ help
+ The shmem is an internal filesystem used to manage shared memory.
+ It is backed by swap and manages resource limits. It is also exported
+ to userspace as tmpfs if TMPFS is enabled. Disabling this
+ option replaces shmem and tmpfs with the much simpler ramfs code,
+ which may be appropriate on small systems without swap.
+
+config AIO
+ bool "Enable AIO support" if EXPERT
+ default y
+ help
+ This option enables POSIX asynchronous I/O which may by used
+ by some high performance threaded applications. Disabling
+ this option saves about 7k.
+
+config EMBEDDED
+ bool "Embedded system"
+ select EXPERT
+ help
+ This option should be enabled if compiling the kernel for
+ an embedded system so certain expert options are available
+ for configuration.
+
+config HAVE_PERF_EVENTS
+ bool
+ help
+ See tools/perf/design.txt for details.
+
+config PERF_USE_VMALLOC
+ bool
+ help
+ See tools/perf/design.txt for details
+
+menu "Kernel Performance Events And Counters"
+
+config PERF_EVENTS
+ bool "Kernel performance events and counters"
+ default y if (PROFILING || PERF_COUNTERS)
+ depends on HAVE_PERF_EVENTS
+ select ANON_INODES
+ select IRQ_WORK
+ help
+ Enable kernel support for various performance events provided
+ by software and hardware.
+
+ Software events are supported either built-in or via the
+ use of generic tracepoints.
+
+ Most modern CPUs support performance events via performance
+ counter registers. These registers count the number of certain
+ types of hw events: such as instructions executed, cachemisses
+ suffered, or branches mis-predicted - without slowing down the
+ kernel or applications. These registers can also trigger interrupts
+ when a threshold number of events have passed - and can thus be
+ used to profile the code that runs on that CPU.
+
+ The Linux Performance Event subsystem provides an abstraction of
+ these software and hardware event capabilities, available via a
+ system call and used by the "perf" utility in tools/perf/. It
+ provides per task and per CPU counters, and it provides event
+ capabilities on top of those.
+
+ Say Y if unsure.
+
+config PERF_COUNTERS
+ bool "Kernel performance counters (old config option)"
+ depends on HAVE_PERF_EVENTS
+ help
+ This config has been obsoleted by the PERF_EVENTS
+ config option - please see that one for details.
+
+ It has no effect on the kernel whether you enable
+ it or not, it is a compatibility placeholder.
+
+ Say N if unsure.
+
+config DEBUG_PERF_USE_VMALLOC
+ default n
+ bool "Debug: use vmalloc to back perf mmap() buffers"
+ depends on PERF_EVENTS && DEBUG_KERNEL
+ select PERF_USE_VMALLOC
+ help
+ Use vmalloc memory to back perf mmap() buffers.
+
+ Mostly useful for debugging the vmalloc code on platforms
+ that don't require it.
+
+ Say N if unsure.
+
+endmenu
+
+config VM_EVENT_COUNTERS
+ default y
+ bool "Enable VM event counters for /proc/vmstat" if EXPERT
+ help
+ VM event counters are needed for event counts to be shown.
+ This option allows the disabling of the VM event counters
+ on EXPERT systems. /proc/vmstat will only show page counts
+ if VM event counters are disabled.
+
+config PCI_QUIRKS
+ default y
+ bool "Enable PCI quirk workarounds" if EXPERT
+ depends on PCI
+ help
+ This enables workarounds for various PCI chipset
+ bugs/quirks. Disable this only if your target machine is
+ unaffected by PCI quirks.
+
+config SLUB_DEBUG
+ default y
+ bool "Enable SLUB debugging support" if EXPERT
+ depends on SLUB && SYSFS
+ help
+ SLUB has extensive debug support features. Disabling these can
+ result in significant savings in code size. This also disables
+ SLUB sysfs support. /sys/slab will not exist and there will be
+ no support for cache validation etc.
+
+config COMPAT_BRK
+ bool "Disable heap randomization"
+ default y
+ help
+ Randomizing heap placement makes heap exploits harder, but it
+ also breaks ancient binaries (including anything libc5 based).
+ This option changes the bootup default to heap randomization
+ disabled, and can be overridden at runtime by setting
+ /proc/sys/kernel/randomize_va_space to 2.
+
+ On non-ancient distros (post-2000 ones) N is usually a safe choice.
+
+choice
+ prompt "Choose SLAB allocator"
+ default SLUB
+ help
+ This option allows to select a slab allocator.
+
+config SLAB
+ bool "SLAB"
+ help
+ The regular slab allocator that is established and known to work
+ well in all environments. It organizes cache hot objects in
+ per cpu and per node queues.
+
+config SLUB
+ bool "SLUB (Unqueued Allocator)"
+ depends on !PREEMPT_RT_FULL
+ help
+ SLUB is a slab allocator that minimizes cache line usage
+ instead of managing queues of cached objects (SLAB approach).
+ Per cpu caching is realized using slabs of objects instead
+ of queues of objects. SLUB can use memory efficiently
+ and has enhanced diagnostics. SLUB is the default choice for
+ a slab allocator.
+
+config SLOB
+ #depends on EXPERT
+ bool "SLOB (Simple Allocator)"
+ #depends on !PREEMPT_RT_FULL
+ help
+ SLOB replaces the stock allocator with a drastically simpler
+ allocator. SLOB is generally more space efficient but
+ does not perform as well on large systems.
+
+config SLOB_OPT
+ bool
+ depends on SLOB
+ default y
+
+endchoice
+
+config MMAP_ALLOW_UNINITIALIZED
+ bool "Allow mmapped anonymous memory to be uninitialized"
+ depends on EXPERT && !MMU
+ default n
+ help
+ Normally, and according to the Linux spec, anonymous memory obtained
+ from mmap() has it's contents cleared before it is passed to
+ userspace. Enabling this config option allows you to request that
+ mmap() skip that if it is given an MAP_UNINITIALIZED flag, thus
+ providing a huge performance boost. If this option is not enabled,
+ then the flag will be ignored.
+
+ This is taken advantage of by uClibc's malloc(), and also by
+ ELF-FDPIC binfmt's brk and stack allocator.
+
+ Because of the obvious security issues, this option should only be
+ enabled on embedded devices where you control what is run in
+ userspace. Since that isn't generally a problem on no-MMU systems,
+ it is normally safe to say Y here.
+
+ See Documentation/nommu-mmap.txt for more information.
+
+config PROFILING
+ bool "Profiling support"
+ help
+ Say Y here to enable the extended profiling support mechanisms used
+ by profilers such as OProfile.
+
+#
+# Place an empty function call at each tracepoint site. Can be
+# dynamically changed for a probe function.
+#
+config TRACEPOINTS
+ bool
+
+source "arch/Kconfig"
+
+endmenu # General setup
+
+config HAVE_GENERIC_DMA_COHERENT
+ bool
+ default n
+
+config SLABINFO
+ bool
+ depends on PROC_FS
+ depends on SLAB || SLUB_DEBUG
+ default y
+
+config RT_MUTEXES
+ boolean
+
+config BASE_SMALL
+ int
+ default 0 if BASE_FULL
+ default 1 if !BASE_FULL
+
+menuconfig MODULES
+ bool "Enable loadable module support"
+ help
+ Kernel modules are small pieces of compiled code which can
+ be inserted in the running kernel, rather than being
+ permanently built into the kernel. You use the "modprobe"
+ tool to add (and sometimes remove) them. If you say Y here,
+ many parts of the kernel can be built as modules (by
+ answering M instead of Y where indicated): this is most
+ useful for infrequently used options which are not required
+ for booting. For more information, see the man pages for
+ modprobe, lsmod, modinfo, insmod and rmmod.
+
+ If you say Y here, you will need to run "make
+ modules_install" to put the modules under /lib/modules/
+ where modprobe can find them (you may need to be root to do
+ this).
+
+ If unsure, say Y.
+
+if MODULES
+
+config MODULE_FORCE_LOAD
+ bool "Forced module loading"
+ default n
+ help
+ Allow loading of modules without version information (ie. modprobe
+ --force). Forced module loading sets the 'F' (forced) taint flag and
+ is usually a really bad idea.
+
+config MODULE_UNLOAD
+ bool "Module unloading"
+ help
+ Without this option you will not be able to unload any
+ modules (note that some modules may not be unloadable
+ anyway), which makes your kernel smaller, faster
+ and simpler. If unsure, say Y.
+
+config MODULE_FORCE_UNLOAD
+ bool "Forced module unloading"
+ depends on MODULE_UNLOAD && EXPERIMENTAL
+ help
+ This option allows you to force a module to unload, even if the
+ kernel believes it is unsafe: the kernel will remove the module
+ without waiting for anyone to stop using it (using the -f option to
+ rmmod). This is mainly for kernel developers and desperate users.
+ If unsure, say N.
+
+config MODVERSIONS
+ bool "Module versioning support"
+ help
+ Usually, you have to use modules compiled with your kernel.
+ Saying Y here makes it sometimes possible to use modules
+ compiled for different kernels, by adding enough information
+ to the modules to (hopefully) spot any changes which would
+ make them incompatible with the kernel you are running. If
+ unsure, say N.
+
+config MODULE_SRCVERSION_ALL
+ bool "Source checksum for all modules"
+ help
+ Modules which contain a MODULE_VERSION get an extra "srcversion"
+ field inserted into their modinfo section, which contains a
+ sum of the source files which made it. This helps maintainers
+ see exactly which source was used to build a module (since
+ others sometimes change the module source without updating
+ the version). With this option, such a "srcversion" field
+ will be created for all modules. If unsure, say N.
+
+endif # MODULES
+
+config INIT_ALL_POSSIBLE
+ bool
+ help
+ Back when each arch used to define their own cpu_online_mask and
+ cpu_possible_mask, some of them chose to initialize cpu_possible_mask
+ with all 1s, and others with all 0s. When they were centralised,
+ it was better to provide this option than to break all the archs
+ and have several arch maintainers pursuing me down dark alleys.
+
+config STOP_MACHINE
+ bool
+ default y
+ depends on (SMP && MODULE_UNLOAD) || HOTPLUG_CPU
+ help
+ Need stop_machine() primitive.
+
+source "block/Kconfig"
+
+config PREEMPT_NOTIFIERS
+ bool
+
+config PADATA
+ depends on SMP
+ bool
+
+source "kernel/Kconfig.locks"