[T106][ZXW-22]7520V3SCV2.01.01.02P42U09_VEC_V0.8_AP_VEC origin source commit
Change-Id: Ic6e05d89ecd62fc34f82b23dcf306c93764aec4b
diff --git a/ap/os/linux/linux-3.4.x/kernel/printk.c b/ap/os/linux/linux-3.4.x/kernel/printk.c
new file mode 100755
index 0000000..0723cde
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/kernel/printk.c
@@ -0,0 +1,2010 @@
+/*
+ * linux/kernel/printk.c
+ *
+ * Copyright (C) 1991, 1992 Linus Torvalds
+ *
+ * Modified to make sys_syslog() more flexible: added commands to
+ * return the last 4k of kernel messages, regardless of whether
+ * they've been read or not. Added option to suppress kernel printk's
+ * to the console. Added hook for sending the console messages
+ * elsewhere, in preparation for a serial line console (someday).
+ * Ted Ts'o, 2/11/93.
+ * Modified for sysctl support, 1/8/97, Chris Horn.
+ * Fixed SMP synchronization, 08/08/99, Manfred Spraul
+ * manfred@colorfullife.com
+ * Rewrote bits to get rid of console_lock
+ * 01Mar01 Andrew Morton
+ */
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/console.h>
+#include <linux/init.h>
+#include <linux/jiffies.h>
+#include <linux/nmi.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/interrupt.h> /* For in_interrupt() */
+#include <linux/delay.h>
+#include <linux/smp.h>
+#include <linux/security.h>
+#include <linux/bootmem.h>
+#include <linux/memblock.h>
+#include <linux/syscalls.h>
+#include <linux/kexec.h>
+#include <linux/kdb.h>
+#include <linux/ratelimit.h>
+#include <linux/kmsg_dump.h>
+#include <linux/syslog.h>
+#include <linux/cpu.h>
+#include <linux/notifier.h>
+#include <linux/rculist.h>
+
+#include <asm/uaccess.h>
+
+#define CREATE_TRACE_POINTS
+#include <trace/events/printk.h>
+
+/* AP LOG BEGIN */
+#if 0
+#include "../drivers/staging/usbproxy/logcat_drv.h"
+//extern int KERNEL_START_END;
+extern T_RINGBUFFER* KERNEL_BUFF;
+extern int enable_kernellog;
+extern UINT32 WriteRingBuffer(T_RINGBUFFER *ringBuf, UINT8 *buf, UINT32 len);
+extern void readringbuf_for_printk();
+#endif
+/* AP LOG END */
+#define CONFIG_ZCAT_DEVICE
+#ifdef CONFIG_ZCAT_DEVICE
+#ifndef CONFIG_SYSTEM_RECOVERY
+extern ssize_t zCatAgt_Kernel_Write(const char *buf, unsigned long count);
+#endif
+#endif
+
+#define __LOG_BUF_LEN (1 << CONFIG_LOG_BUF_SHIFT)
+
+
+#ifdef CONFIG_DEBUG_LL
+extern void printascii(char *);
+#endif
+
+/* printk's without a loglevel use this.. */
+#define DEFAULT_MESSAGE_LOGLEVEL CONFIG_DEFAULT_MESSAGE_LOGLEVEL
+
+/* We show everything that is MORE important than this.. */
+#define MINIMUM_CONSOLE_LOGLEVEL 1 /* Minimum loglevel we let people use */
+#define DEFAULT_CONSOLE_LOGLEVEL 7 /* anything MORE serious than KERN_DEBUG */
+
+DECLARE_WAIT_QUEUE_HEAD(log_wait);
+
+int console_printk[4] = {
+ DEFAULT_CONSOLE_LOGLEVEL, /* console_loglevel */
+ DEFAULT_MESSAGE_LOGLEVEL, /* default_message_loglevel */
+ MINIMUM_CONSOLE_LOGLEVEL, /* minimum_console_loglevel */
+ DEFAULT_CONSOLE_LOGLEVEL, /* default_console_loglevel */
+};
+
+/*
+ * Low level drivers may need that to know if they can schedule in
+ * their unblank() callback or not. So let's export it.
+ */
+int oops_in_progress;
+EXPORT_SYMBOL(oops_in_progress);
+
+/*
+ * console_sem protects the console_drivers list, and also
+ * provides serialisation for access to the entire console
+ * driver system.
+ */
+static DEFINE_SEMAPHORE(console_sem);
+struct console *console_drivers;
+EXPORT_SYMBOL_GPL(console_drivers);
+
+/*
+ * This is used for debugging the mess that is the VT code by
+ * keeping track if we have the console semaphore held. It's
+ * definitely not the perfect debug tool (we don't know if _WE_
+ * hold it are racing, but it helps tracking those weird code
+ * path in the console code where we end up in places I want
+ * locked without the console sempahore held
+ */
+static int console_locked, console_suspended;
+
+/*
+ * logbuf_lock protects log_buf, log_start, log_end, con_start and logged_chars
+ * It is also used in interesting ways to provide interlocking in
+ * console_unlock();.
+ */
+static DEFINE_RAW_SPINLOCK(logbuf_lock);
+
+#define LOG_BUF_MASK (log_buf_len-1)
+#define LOG_BUF(idx) (log_buf[(idx) & LOG_BUF_MASK])
+
+/*
+ * The indices into log_buf are not constrained to log_buf_len - they
+ * must be masked before subscripting
+ */
+static unsigned log_start; /* Index into log_buf: next char to be read by syslog() */
+static unsigned con_start; /* Index into log_buf: next char to be sent to consoles */
+static unsigned log_end; /* Index into log_buf: most-recently-written-char + 1 */
+
+/*
+ * If exclusive_console is non-NULL then only this console is to be printed to.
+ */
+static struct console *exclusive_console;
+
+/*
+ * Array of consoles built from command line options (console=)
+ */
+struct console_cmdline
+{
+ char name[16]; /* Name of the driver */
+ int index; /* Minor dev. to use */
+ char *options; /* Options for the driver */
+#ifdef CONFIG_A11Y_BRAILLE_CONSOLE
+ char *brl_options; /* Options for braille driver */
+#endif
+};
+
+#define MAX_CMDLINECONSOLES 8
+
+static struct console_cmdline console_cmdline[MAX_CMDLINECONSOLES];
+static int selected_console = -1;
+static int preferred_console = -1;
+int console_set_on_cmdline;
+EXPORT_SYMBOL(console_set_on_cmdline);
+
+/* Flag: console code may call schedule() */
+static int console_may_schedule;
+
+#ifdef CONFIG_PRINTK
+
+static char __log_buf[__LOG_BUF_LEN];
+static char *log_buf = __log_buf;
+static int log_buf_len = __LOG_BUF_LEN;
+static unsigned logged_chars; /* Number of chars produced since last read+clear operation */
+static int saved_console_loglevel = -1;
+
+#ifdef CONFIG_KEXEC
+/*
+ * This appends the listed symbols to /proc/vmcoreinfo
+ *
+ * /proc/vmcoreinfo is used by various utiilties, like crash and makedumpfile to
+ * obtain access to symbols that are otherwise very difficult to locate. These
+ * symbols are specifically used so that utilities can access and extract the
+ * dmesg log from a vmcore file after a crash.
+ */
+void log_buf_kexec_setup(void)
+{
+ VMCOREINFO_SYMBOL(log_buf);
+ VMCOREINFO_SYMBOL(log_end);
+ VMCOREINFO_SYMBOL(log_buf_len);
+ VMCOREINFO_SYMBOL(logged_chars);
+}
+#endif
+
+/* requested log_buf_len from kernel cmdline */
+static unsigned long __initdata new_log_buf_len;
+
+/* save requested log_buf_len since it's too early to process it */
+static int __init log_buf_len_setup(char *str)
+{
+ unsigned size = memparse(str, &str);
+
+ if (size)
+ size = roundup_pow_of_two(size);
+ if (size > log_buf_len)
+ new_log_buf_len = size;
+
+ return 0;
+}
+early_param("log_buf_len", log_buf_len_setup);
+
+void __init setup_log_buf(int early)
+{
+ unsigned long flags;
+ unsigned start, dest_idx, offset;
+ char *new_log_buf;
+ int free;
+
+ if (!new_log_buf_len)
+ return;
+
+ if (early) {
+ unsigned long mem;
+
+ mem = memblock_alloc(new_log_buf_len, PAGE_SIZE);
+ if (!mem)
+ return;
+ new_log_buf = __va(mem);
+ } else {
+ new_log_buf = alloc_bootmem_nopanic(new_log_buf_len);
+ }
+
+ if (unlikely(!new_log_buf)) {
+ pr_err("log_buf_len: %ld bytes not available\n",
+ new_log_buf_len);
+ return;
+ }
+
+ raw_spin_lock_irqsave(&logbuf_lock, flags);
+ log_buf_len = new_log_buf_len;
+ log_buf = new_log_buf;
+ new_log_buf_len = 0;
+ free = __LOG_BUF_LEN - log_end;
+
+ offset = start = min(con_start, log_start);
+ dest_idx = 0;
+ while (start != log_end) {
+ unsigned log_idx_mask = start & (__LOG_BUF_LEN - 1);
+
+ log_buf[dest_idx] = __log_buf[log_idx_mask];
+ start++;
+ dest_idx++;
+ }
+ log_start -= offset;
+ con_start -= offset;
+ log_end -= offset;
+ raw_spin_unlock_irqrestore(&logbuf_lock, flags);
+
+ pr_info("log_buf_len: %d\n", log_buf_len);
+ pr_info("early log buf free: %d(%d%%)\n",
+ free, (free * 100) / __LOG_BUF_LEN);
+}
+
+#ifdef CONFIG_BOOT_PRINTK_DELAY
+
+static int boot_delay; /* msecs delay after each printk during bootup */
+static unsigned long long loops_per_msec; /* based on boot_delay */
+
+static int __init boot_delay_setup(char *str)
+{
+ unsigned long lpj;
+
+ lpj = preset_lpj ? preset_lpj : 1000000; /* some guess */
+ loops_per_msec = (unsigned long long)lpj / 1000 * HZ;
+
+ get_option(&str, &boot_delay);
+ if (boot_delay > 10 * 1000)
+ boot_delay = 0;
+
+ pr_debug("boot_delay: %u, preset_lpj: %ld, lpj: %lu, "
+ "HZ: %d, loops_per_msec: %llu\n",
+ boot_delay, preset_lpj, lpj, HZ, loops_per_msec);
+ return 1;
+}
+__setup("boot_delay=", boot_delay_setup);
+
+static void boot_delay_msec(void)
+{
+ unsigned long long k;
+ unsigned long timeout;
+
+ if (boot_delay == 0 || system_state != SYSTEM_BOOTING)
+ return;
+
+ k = (unsigned long long)loops_per_msec * boot_delay;
+
+ timeout = jiffies + msecs_to_jiffies(boot_delay);
+ while (k) {
+ k--;
+ cpu_relax();
+ /*
+ * use (volatile) jiffies to prevent
+ * compiler reduction; loop termination via jiffies
+ * is secondary and may or may not happen.
+ */
+ if (time_after(jiffies, timeout))
+ break;
+ touch_nmi_watchdog();
+ }
+}
+#else
+static inline void boot_delay_msec(void)
+{
+}
+#endif
+
+/*
+ * Return the number of unread characters in the log buffer.
+ */
+static int log_buf_get_len(void)
+{
+ return logged_chars;
+}
+
+/*
+ * Clears the ring-buffer
+ */
+void log_buf_clear(void)
+{
+ logged_chars = 0;
+}
+
+/*
+ * Copy a range of characters from the log buffer.
+ */
+int log_buf_copy(char *dest, int idx, int len)
+{
+ int ret, max;
+ bool took_lock = false;
+
+ if (!oops_in_progress) {
+ raw_spin_lock_irq(&logbuf_lock);
+ took_lock = true;
+ }
+
+ max = log_buf_get_len();
+ if (idx < 0 || idx >= max) {
+ ret = -1;
+ } else {
+ if (len > max - idx)
+ len = max - idx;
+ ret = len;
+ idx += (log_end - max);
+ while (len-- > 0)
+ dest[len] = LOG_BUF(idx + len);
+ }
+
+ if (took_lock)
+ raw_spin_unlock_irq(&logbuf_lock);
+
+ return ret;
+}
+
+#ifdef CONFIG_SECURITY_DMESG_RESTRICT
+int dmesg_restrict = 1;
+#else
+int dmesg_restrict;
+#endif
+
+static int syslog_action_restricted(int type)
+{
+ if (dmesg_restrict)
+ return 1;
+ /* Unless restricted, we allow "read all" and "get buffer size" for everybody */
+ return type != SYSLOG_ACTION_READ_ALL && type != SYSLOG_ACTION_SIZE_BUFFER;
+}
+
+static int check_syslog_permissions(int type, bool from_file)
+{
+ /*
+ * If this is from /proc/kmsg and we've already opened it, then we've
+ * already done the capabilities checks at open time.
+ */
+ if (from_file && type != SYSLOG_ACTION_OPEN)
+ return 0;
+
+ if (syslog_action_restricted(type)) {
+ if (capable(CAP_SYSLOG))
+ return 0;
+ /* For historical reasons, accept CAP_SYS_ADMIN too, with a warning */
+ if (capable(CAP_SYS_ADMIN)) {
+ printk_once(KERN_WARNING "%s (%d): "
+ "Attempt to access syslog with CAP_SYS_ADMIN "
+ "but no CAP_SYSLOG (deprecated).\n",
+ current->comm, task_pid_nr(current));
+ return 0;
+ }
+ return -EPERM;
+ }
+ return 0;
+}
+
+int do_syslog(int type, char __user *buf, int len, bool from_file)
+{
+ unsigned i, j, limit, count;
+ int do_clear = 0;
+ char c;
+ int error;
+
+ error = check_syslog_permissions(type, from_file);
+ if (error)
+ goto out;
+
+ error = security_syslog(type);
+ if (error)
+ return error;
+
+ switch (type) {
+ case SYSLOG_ACTION_CLOSE: /* Close log */
+ break;
+ case SYSLOG_ACTION_OPEN: /* Open log */
+ break;
+ case SYSLOG_ACTION_READ: /* Read from log */
+ error = -EINVAL;
+ if (!buf || len < 0)
+ goto out;
+ error = 0;
+ if (!len)
+ goto out;
+ if (!access_ok(VERIFY_WRITE, buf, len)) {
+ error = -EFAULT;
+ goto out;
+ }
+ error = wait_event_interruptible(log_wait,
+ (log_start - log_end));
+ if (error)
+ goto out;
+ i = 0;
+ raw_spin_lock_irq(&logbuf_lock);
+ while (!error && (log_start != log_end) && i < len) {
+ c = LOG_BUF(log_start);
+ log_start++;
+ raw_spin_unlock_irq(&logbuf_lock);
+ error = __put_user(c,buf);
+ buf++;
+ i++;
+ cond_resched();
+ raw_spin_lock_irq(&logbuf_lock);
+ }
+ raw_spin_unlock_irq(&logbuf_lock);
+ if (!error)
+ error = i;
+ break;
+ /* Read/clear last kernel messages */
+ case SYSLOG_ACTION_READ_CLEAR:
+ do_clear = 1;
+ /* FALL THRU */
+ /* Read last kernel messages */
+ case SYSLOG_ACTION_READ_ALL:
+ error = -EINVAL;
+ if (!buf || len < 0)
+ goto out;
+ error = 0;
+ if (!len)
+ goto out;
+ if (!access_ok(VERIFY_WRITE, buf, len)) {
+ error = -EFAULT;
+ goto out;
+ }
+ count = len;
+ if (count > log_buf_len)
+ count = log_buf_len;
+ raw_spin_lock_irq(&logbuf_lock);
+ if (count > logged_chars)
+ count = logged_chars;
+ if (do_clear)
+ logged_chars = 0;
+ limit = log_end;
+ /*
+ * __put_user() could sleep, and while we sleep
+ * printk() could overwrite the messages
+ * we try to copy to user space. Therefore
+ * the messages are copied in reverse. <manfreds>
+ */
+ for (i = 0; i < count && !error; i++) {
+ j = limit-1-i;
+ if (j + log_buf_len < log_end)
+ break;
+ c = LOG_BUF(j);
+ raw_spin_unlock_irq(&logbuf_lock);
+ error = __put_user(c,&buf[count-1-i]);
+ cond_resched();
+ raw_spin_lock_irq(&logbuf_lock);
+ }
+ raw_spin_unlock_irq(&logbuf_lock);
+ if (error)
+ break;
+ error = i;
+ if (i != count) {
+ int offset = count-error;
+ /* buffer overflow during copy, correct user buffer. */
+ for (i = 0; i < error; i++) {
+ if (__get_user(c,&buf[i+offset]) ||
+ __put_user(c,&buf[i])) {
+ error = -EFAULT;
+ break;
+ }
+ cond_resched();
+ }
+ }
+ break;
+ /* Clear ring buffer */
+ case SYSLOG_ACTION_CLEAR:
+ logged_chars = 0;
+ break;
+ /* Disable logging to console */
+ case SYSLOG_ACTION_CONSOLE_OFF:
+ if (saved_console_loglevel == -1)
+ saved_console_loglevel = console_loglevel;
+ console_loglevel = minimum_console_loglevel;
+ break;
+ /* Enable logging to console */
+ case SYSLOG_ACTION_CONSOLE_ON:
+ if (saved_console_loglevel != -1) {
+ console_loglevel = saved_console_loglevel;
+ saved_console_loglevel = -1;
+ }
+ break;
+ /* Set level of messages printed to console */
+ case SYSLOG_ACTION_CONSOLE_LEVEL:
+ error = -EINVAL;
+ if (len < 1 || len > 8)
+ goto out;
+ if (len < minimum_console_loglevel)
+ len = minimum_console_loglevel;
+ console_loglevel = len;
+ /* Implicitly re-enable logging to console */
+ saved_console_loglevel = -1;
+ error = 0;
+ break;
+ /* Number of chars in the log buffer */
+ case SYSLOG_ACTION_SIZE_UNREAD:
+ error = log_end - log_start;
+ break;
+ /* Size of the log buffer */
+ case SYSLOG_ACTION_SIZE_BUFFER:
+ error = log_buf_len;
+ break;
+ default:
+ error = -EINVAL;
+ break;
+ }
+out:
+ return error;
+}
+
+SYSCALL_DEFINE3(syslog, int, type, char __user *, buf, int, len)
+{
+ return do_syslog(type, buf, len, SYSLOG_FROM_CALL);
+}
+
+#ifdef CONFIG_KGDB_KDB
+/* kdb dmesg command needs access to the syslog buffer. do_syslog()
+ * uses locks so it cannot be used during debugging. Just tell kdb
+ * where the start and end of the physical and logical logs are. This
+ * is equivalent to do_syslog(3).
+ */
+void kdb_syslog_data(char *syslog_data[4])
+{
+ syslog_data[0] = log_buf;
+ syslog_data[1] = log_buf + log_buf_len;
+ syslog_data[2] = log_buf + log_end -
+ (logged_chars < log_buf_len ? logged_chars : log_buf_len);
+ syslog_data[3] = log_buf + log_end;
+}
+#endif /* CONFIG_KGDB_KDB */
+
+/*
+ * Call the console drivers on a range of log_buf
+ */
+static void __call_console_drivers(unsigned start, unsigned end)
+{
+ struct console *con;
+
+ migrate_disable();
+ for_each_console(con) {
+ if (exclusive_console && con != exclusive_console)
+ continue;
+ if ((con->flags & CON_ENABLED) && con->write &&
+ (cpu_online(smp_processor_id()) ||
+ (con->flags & CON_ANYTIME)))
+ con->write(con, &LOG_BUF(start), end - start);
+ }
+ migrate_enable();
+}
+
+#ifdef CONFIG_EARLY_PRINTK
+struct console *early_console;
+
+static void early_vprintk(const char *fmt, va_list ap)
+{
+ if (early_console) {
+ char buf[512];
+ int n = vscnprintf(buf, sizeof(buf), fmt, ap);
+
+ early_console->write(early_console, buf, n);
+ }
+}
+
+asmlinkage void early_printk(const char *fmt, ...)
+{
+ va_list ap;
+
+ va_start(ap, fmt);
+ early_vprintk(fmt, ap);
+ va_end(ap);
+}
+
+/*
+ * This is independent of any log levels - a global
+ * kill switch that turns off all of printk.
+ *
+ * Used by the NMI watchdog if early-printk is enabled.
+ */
+static bool __read_mostly printk_killswitch;
+
+static int __init force_early_printk_setup(char *str)
+{
+ printk_killswitch = true;
+ return 0;
+}
+early_param("force_early_printk", force_early_printk_setup);
+
+void printk_kill(void)
+{
+ printk_killswitch = true;
+}
+
+static int forced_early_printk(const char *fmt, va_list ap)
+{
+ if (!printk_killswitch)
+ return 0;
+ early_vprintk(fmt, ap);
+ return 1;
+}
+#else
+static inline int forced_early_printk(const char *fmt, va_list ap)
+{
+ return 0;
+}
+#endif
+
+static bool __read_mostly ignore_loglevel;
+
+static int __init ignore_loglevel_setup(char *str)
+{
+ ignore_loglevel = 1;
+ printk(KERN_INFO "debug: ignoring loglevel setting.\n");
+
+ return 0;
+}
+
+early_param("ignore_loglevel", ignore_loglevel_setup);
+module_param(ignore_loglevel, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(ignore_loglevel, "ignore loglevel setting, to"
+ "print all kernel messages to the console.");
+
+/*
+ * Write out chars from start to end - 1 inclusive
+ */
+static void _call_console_drivers(unsigned start,
+ unsigned end, int msg_log_level)
+{
+ trace_console(&LOG_BUF(0), start, end, log_buf_len);
+
+ if ((msg_log_level < console_loglevel || ignore_loglevel) &&
+ console_drivers && start != end) {
+ if ((start & LOG_BUF_MASK) > (end & LOG_BUF_MASK)) {
+ /* wrapped write */
+ __call_console_drivers(start & LOG_BUF_MASK,
+ log_buf_len);
+ __call_console_drivers(0, end & LOG_BUF_MASK);
+ } else {
+ __call_console_drivers(start, end);
+ }
+ }
+}
+
+/*
+ * Parse the syslog header <[0-9]*>. The decimal value represents 32bit, the
+ * lower 3 bit are the log level, the rest are the log facility. In case
+ * userspace passes usual userspace syslog messages to /dev/kmsg or
+ * /dev/ttyprintk, the log prefix might contain the facility. Printk needs
+ * to extract the correct log level for in-kernel processing, and not mangle
+ * the original value.
+ *
+ * If a prefix is found, the length of the prefix is returned. If 'level' is
+ * passed, it will be filled in with the log level without a possible facility
+ * value. If 'special' is passed, the special printk prefix chars are accepted
+ * and returned. If no valid header is found, 0 is returned and the passed
+ * variables are not touched.
+ */
+static size_t log_prefix(const char *p, unsigned int *level, char *special)
+{
+ unsigned int lev = 0;
+ char sp = '\0';
+ size_t len;
+
+ if (p[0] != '<' || !p[1])
+ return 0;
+ if (p[2] == '>') {
+ /* usual single digit level number or special char */
+ switch (p[1]) {
+ case '0' ... '7':
+ lev = p[1] - '0';
+ break;
+ case 'c': /* KERN_CONT */
+ case 'd': /* KERN_DEFAULT */
+ sp = p[1];
+ break;
+ default:
+ return 0;
+ }
+ len = 3;
+ } else {
+ /* multi digit including the level and facility number */
+ char *endp = NULL;
+
+ lev = (simple_strtoul(&p[1], &endp, 10) & 7);
+ if (endp == NULL || endp[0] != '>')
+ return 0;
+ len = (endp + 1) - p;
+ }
+
+ /* do not accept special char if not asked for */
+ if (sp && !special)
+ return 0;
+
+ if (special) {
+ *special = sp;
+ /* return special char, do not touch level */
+ if (sp)
+ return len;
+ }
+
+ if (level)
+ *level = lev;
+ return len;
+}
+
+/*
+ * Call the console drivers, asking them to write out
+ * log_buf[start] to log_buf[end - 1].
+ * The console_lock must be held.
+ */
+static void call_console_drivers(unsigned start, unsigned end)
+{
+ unsigned cur_index, start_print;
+ static int msg_level = -1;
+
+ BUG_ON(((int)(start - end)) > 0);
+
+ cur_index = start;
+ start_print = start;
+ while (cur_index != end) {
+ if (msg_level < 0 && ((end - cur_index) > 2)) {
+ /*
+ * prepare buf_prefix, as a contiguous array,
+ * to be processed by log_prefix function
+ */
+ char buf_prefix[SYSLOG_PRI_MAX_LENGTH+1];
+ unsigned i;
+ for (i = 0; i < ((end - cur_index)) && (i < SYSLOG_PRI_MAX_LENGTH); i++) {
+ buf_prefix[i] = LOG_BUF(cur_index + i);
+ }
+ buf_prefix[i] = '\0'; /* force '\0' as last string character */
+
+ /* strip log prefix */
+ cur_index += log_prefix((const char *)&buf_prefix, &msg_level, NULL);
+ start_print = cur_index;
+ }
+ while (cur_index != end) {
+ char c = LOG_BUF(cur_index);
+
+ cur_index++;
+ if (c == '\n') {
+ if (msg_level < 0) {
+ /*
+ * printk() has already given us loglevel tags in
+ * the buffer. This code is here in case the
+ * log buffer has wrapped right round and scribbled
+ * on those tags
+ */
+ msg_level = default_message_loglevel;
+ }
+ _call_console_drivers(start_print, cur_index, msg_level);
+ msg_level = -1;
+ start_print = cur_index;
+ break;
+ }
+ }
+ }
+ _call_console_drivers(start_print, end, msg_level);
+}
+
+static void emit_log_char(char c)
+{
+ LOG_BUF(log_end) = c;
+ log_end++;
+ if (log_end - log_start > log_buf_len)
+ log_start = log_end - log_buf_len;
+ if (log_end - con_start > log_buf_len)
+ con_start = log_end - log_buf_len;
+ if (logged_chars < log_buf_len)
+ logged_chars++;
+
+ /* AP LOG BEGIN */
+ //if (1 == KERNEL_START_END)
+ #if 0
+ if (KERNEL_BUFF!=NULL&&enable_kernellog ==1)
+ {
+ WriteRingBuffer(KERNEL_BUFF, &c, 1);
+ readringbuf_for_printk();
+ }
+ #endif
+ /* AP LOG END */
+
+#ifdef CONFIG_ZCAT_DEVICE
+#ifndef CONFIG_SYSTEM_RECOVERY
+ #ifdef USE_CPPS_KO
+ if(cpps_callbacks.zCatAgt_Kernel_Write)
+ cpps_callbacks.zCatAgt_Kernel_Write(&c, 1);
+ #else
+ zCatAgt_Kernel_Write(&c, 1);
+ #endif
+#endif
+#endif
+}
+
+/*
+ * Zap console related locks when oopsing. Only zap at most once
+ * every 10 seconds, to leave time for slow consoles to print a
+ * full oops.
+ */
+static void zap_locks(void)
+{
+ static unsigned long oops_timestamp;
+
+ if (time_after_eq(jiffies, oops_timestamp) &&
+ !time_after(jiffies, oops_timestamp + 30 * HZ))
+ return;
+
+ oops_timestamp = jiffies;
+
+ debug_locks_off();
+ /* If a crash is occurring, make sure we can't deadlock */
+ raw_spin_lock_init(&logbuf_lock);
+ /* And make sure that we print immediately */
+ sema_init(&console_sem, 1);
+}
+
+#if defined(CONFIG_PRINTK_TIME)
+static bool printk_time = 1;
+#else
+static bool printk_time = 0;
+#endif
+module_param_named(time, printk_time, bool, S_IRUGO | S_IWUSR);
+
+#define CORE_PREFIX_STR "[AP-3.4] "
+#define CORE_PREFIX_LEN strlen(CORE_PREFIX_STR)
+
+static bool always_kmsg_dump;
+module_param_named(always_kmsg_dump, always_kmsg_dump, bool, S_IRUGO | S_IWUSR);
+
+/* Check if we have any console registered that can be called early in boot. */
+static int have_callable_console(void)
+{
+ struct console *con;
+
+ for_each_console(con)
+ if (con->flags & CON_ANYTIME)
+ return 1;
+
+ return 0;
+}
+
+/**
+ * printk - print a kernel message
+ * @fmt: format string
+ *
+ * This is printk(). It can be called from any context. We want it to work.
+ *
+ * We try to grab the console_lock. If we succeed, it's easy - we log the output and
+ * call the console drivers. If we fail to get the semaphore we place the output
+ * into the log buffer and return. The current holder of the console_sem will
+ * notice the new output in console_unlock(); and will send it to the
+ * consoles before releasing the lock.
+ *
+ * One effect of this deferred printing is that code which calls printk() and
+ * then changes console_loglevel may break. This is because console_loglevel
+ * is inspected when the actual printing occurs.
+ *
+ * See also:
+ * printf(3)
+ *
+ * See the vsnprintf() documentation for format string extensions over C99.
+ */
+
+asmlinkage int printk(const char *fmt, ...)
+{
+ va_list args;
+ int r;
+
+#ifdef CONFIG_KGDB_KDB
+ if (unlikely(kdb_trap_printk)) {
+ va_start(args, fmt);
+ r = vkdb_printf(fmt, args);
+ va_end(args);
+ return r;
+ }
+#endif
+ va_start(args, fmt);
+ r = vprintk(fmt, args);
+ va_end(args);
+
+ return r;
+}
+
+/* cpu currently holding logbuf_lock */
+static volatile unsigned int printk_cpu = UINT_MAX;
+
+/*
+ * Can we actually use the console at this time on this cpu?
+ *
+ * Console drivers may assume that per-cpu resources have
+ * been allocated. So unless they're explicitly marked as
+ * being able to cope (CON_ANYTIME) don't call them until
+ * this CPU is officially up.
+ */
+static inline int can_use_console(unsigned int cpu)
+{
+ return cpu_online(cpu) || have_callable_console();
+}
+
+/*
+ * Try to get console ownership to actually show the kernel
+ * messages from a 'printk'. Return true (and with the
+ * console_lock held, and 'console_locked' set) if it
+ * is successful, false otherwise.
+ *
+ * This gets called with the 'logbuf_lock' spinlock held and
+ * interrupts disabled. It should return with 'lockbuf_lock'
+ * released but interrupts still disabled.
+ */
+static int console_trylock_for_printk(unsigned int cpu, unsigned long flags)
+ __releases(&logbuf_lock)
+{
+ int retval = 0, wake = 0;
+#ifdef CONFIG_PREEMPT_RT_FULL
+ /*Ïß³ÌÓÅÏȼ¶¸ßÓÚÐÒéÕ»ÖØÒªÏ̵߳ģ¨ÓëÅíÀÚ¼°¹úÆÂÈ·ÈÏ£¬Ôݶ¨62ÓÅÏȼ¶£©£¬²»ÔÙʵʱ´òÓ¡£¬EC 616000549169*/
+ int lock = !early_boot_irqs_disabled && !irqs_disabled_flags(flags) &&
+ (preempt_count() <= 1) && (current->prio > 62);
+#else
+ int lock = 1;
+#endif
+
+ if (lock && console_trylock()) {
+ retval = 1;
+
+ /*
+ * If we can't use the console, we need to release
+ * the console semaphore by hand to avoid flushing
+ * the buffer. We need to hold the console semaphore
+ * in order to do this test safely.
+ */
+ if (!can_use_console(cpu)) {
+ console_locked = 0;
+ wake = 1;
+ retval = 0;
+ }
+ }
+ printk_cpu = UINT_MAX;
+ raw_spin_unlock(&logbuf_lock);
+ if (wake)
+ up(&console_sem);
+ return retval;
+}
+static const char recursion_bug_msg [] =
+ KERN_CRIT "BUG: recent printk recursion!\n";
+static int recursion_bug;
+static int new_text_line = 1;
+static char printk_buf[1024];
+
+int printk_delay_msec __read_mostly;
+
+static inline void printk_delay(void)
+{
+ if (unlikely(printk_delay_msec)) {
+ int m = printk_delay_msec;
+
+ while (m--) {
+ mdelay(1);
+ touch_nmi_watchdog();
+ }
+ }
+}
+
+asmlinkage int vprintk(const char *fmt, va_list args)
+{
+ int printed_len = 0;
+ int current_log_level = default_message_loglevel;
+ unsigned long flags;
+ int this_cpu;
+ char *p;
+ size_t plen;
+ char special;
+
+ /*
+ * Fall back to early_printk if a debugging subsystem has
+ * killed printk output
+ */
+ if (unlikely(forced_early_printk(fmt, args)))
+ return 1;
+
+ boot_delay_msec();
+ printk_delay();
+
+ /* This stops the holder of console_sem just where we want him */
+ local_irq_save(flags);
+ this_cpu = smp_processor_id();
+
+ /*
+ * Ouch, printk recursed into itself!
+ */
+ if (unlikely(printk_cpu == this_cpu)) {
+ /*
+ * If a crash is occurring during printk() on this CPU,
+ * then try to get the crash message out but make sure
+ * we can't deadlock. Otherwise just return to avoid the
+ * recursion and return - but flag the recursion so that
+ * it can be printed at the next appropriate moment:
+ */
+ if (!oops_in_progress && !lockdep_recursing(current)) {
+ recursion_bug = 1;
+ goto out_restore_irqs;
+ }
+ zap_locks();
+ }
+
+ lockdep_off();
+ raw_spin_lock(&logbuf_lock);
+ printk_cpu = this_cpu;
+
+ if (recursion_bug) {
+ recursion_bug = 0;
+ strcpy(printk_buf, recursion_bug_msg);
+ printed_len = strlen(recursion_bug_msg);
+ }
+ /* Emit the output into the temporary buffer */
+ printed_len += vscnprintf(printk_buf + printed_len,
+ sizeof(printk_buf) - printed_len, fmt, args);
+
+#ifdef CONFIG_DEBUG_LL
+ printascii(printk_buf);
+#endif
+
+ p = printk_buf;
+
+ /* Read log level and handle special printk prefix */
+ plen = log_prefix(p, ¤t_log_level, &special);
+ if (plen) {
+ p += plen;
+
+ switch (special) {
+ case 'c': /* Strip <c> KERN_CONT, continue line */
+ plen = 0;
+ break;
+ case 'd': /* Strip <d> KERN_DEFAULT, start new line */
+ plen = 0;
+ default:
+ if (!new_text_line) {
+ emit_log_char('\n');
+ new_text_line = 1;
+ }
+ }
+ }
+
+ /*
+ * Copy the output into log_buf. If the caller didn't provide
+ * the appropriate log prefix, we insert them here
+ */
+ for (; *p; p++) {
+ if (new_text_line) {
+ new_text_line = 0;
+
+ if (plen) {
+ /* Copy original log prefix */
+ int i;
+
+ for (i = 0; i < plen; i++)
+ emit_log_char(printk_buf[i]);
+ printed_len += plen;
+ } else {
+ /* Add log prefix */
+ emit_log_char('<');
+ emit_log_char(current_log_level + '0');
+ emit_log_char('>');
+ printed_len += 3;
+ }
+
+#ifdef _USE_VEHICLE_DC
+ /* Add the current core type */
+ char cbuf[] = CORE_PREFIX_STR, *cp;
+ unsigned clen = CORE_PREFIX_LEN;
+
+ for (cp = cbuf; cp < cbuf + clen; cp++)
+ emit_log_char(*cp);
+ printed_len += clen;
+#endif
+
+ if (printk_time) {
+ /* Add the current time stamp */
+ char tbuf[50], *tp;
+ unsigned tlen;
+ unsigned long long t;
+ unsigned long nanosec_rem;
+
+ t = cpu_clock(printk_cpu);
+ nanosec_rem = do_div(t, 1000000000);
+ tlen = sprintf(tbuf, "[%5lu.%06lu] ",
+ (unsigned long) t,
+ nanosec_rem / 1000);
+
+ for (tp = tbuf; tp < tbuf + tlen; tp++)
+ emit_log_char(*tp);
+ printed_len += tlen;
+ }
+
+ if (!*p)
+ break;
+ }
+
+ emit_log_char(*p);
+ if (*p == '\n')
+ new_text_line = 1;
+ }
+
+ /*
+ * Try to acquire and then immediately release the
+ * console semaphore. The release will do all the
+ * actual magic (print out buffers, wake up klogd,
+ * etc).
+ *
+ * The console_trylock_for_printk() function
+ * will release 'logbuf_lock' regardless of whether it
+ * actually gets the semaphore or not.
+ */
+ if (console_trylock_for_printk(this_cpu, flags)) {
+#ifndef CONFIG_PREEMPT_RT_FULL
+ console_unlock();
+#else
+ raw_local_irq_restore(flags);
+ console_unlock();
+ raw_local_irq_save(flags);
+#endif
+ }
+
+ lockdep_on();
+out_restore_irqs:
+ local_irq_restore(flags);
+
+ return printed_len;
+}
+EXPORT_SYMBOL(printk);
+EXPORT_SYMBOL(vprintk);
+
+#else
+
+static void call_console_drivers(unsigned start, unsigned end)
+{
+}
+
+#endif
+
+static int __add_preferred_console(char *name, int idx, char *options,
+ char *brl_options)
+{
+ struct console_cmdline *c;
+ int i;
+
+ /*
+ * See if this tty is not yet registered, and
+ * if we have a slot free.
+ */
+ for (i = 0; i < MAX_CMDLINECONSOLES && console_cmdline[i].name[0]; i++)
+ if (strcmp(console_cmdline[i].name, name) == 0 &&
+ console_cmdline[i].index == idx) {
+ if (!brl_options)
+ selected_console = i;
+ return 0;
+ }
+ if (i == MAX_CMDLINECONSOLES)
+ return -E2BIG;
+ if (!brl_options)
+ selected_console = i;
+ c = &console_cmdline[i];
+ strlcpy(c->name, name, sizeof(c->name));
+ c->options = options;
+#ifdef CONFIG_A11Y_BRAILLE_CONSOLE
+ c->brl_options = brl_options;
+#endif
+ c->index = idx;
+ return 0;
+}
+/*
+ * Set up a list of consoles. Called from init/main.c
+ */
+static int __init console_setup(char *str)
+{
+ char buf[sizeof(console_cmdline[0].name) + 4]; /* 4 for index */
+ char *s, *options, *brl_options = NULL;
+ int idx;
+
+#ifdef CONFIG_A11Y_BRAILLE_CONSOLE
+ if (!memcmp(str, "brl,", 4)) {
+ brl_options = "";
+ str += 4;
+ } else if (!memcmp(str, "brl=", 4)) {
+ brl_options = str + 4;
+ str = strchr(brl_options, ',');
+ if (!str) {
+ printk(KERN_ERR "need port name after brl=\n");
+ return 1;
+ }
+ *(str++) = 0;
+ }
+#endif
+
+ /*
+ * Decode str into name, index, options.
+ */
+ if (str[0] >= '0' && str[0] <= '9') {
+ strcpy(buf, "ttyS");
+ strncpy(buf + 4, str, sizeof(buf) - 5);
+ } else {
+ strncpy(buf, str, sizeof(buf) - 1);
+ }
+ buf[sizeof(buf) - 1] = 0;
+ if ((options = strchr(str, ',')) != NULL)
+ *(options++) = 0;
+#ifdef __sparc__
+ if (!strcmp(str, "ttya"))
+ strcpy(buf, "ttyS0");
+ if (!strcmp(str, "ttyb"))
+ strcpy(buf, "ttyS1");
+#endif
+ for (s = buf; *s; s++)
+ if ((*s >= '0' && *s <= '9') || *s == ',')
+ break;
+ idx = simple_strtoul(s, NULL, 10);
+ *s = 0;
+
+ __add_preferred_console(buf, idx, options, brl_options);
+ console_set_on_cmdline = 1;
+ return 1;
+}
+__setup("console=", console_setup);
+
+/**
+ * add_preferred_console - add a device to the list of preferred consoles.
+ * @name: device name
+ * @idx: device index
+ * @options: options for this console
+ *
+ * The last preferred console added will be used for kernel messages
+ * and stdin/out/err for init. Normally this is used by console_setup
+ * above to handle user-supplied console arguments; however it can also
+ * be used by arch-specific code either to override the user or more
+ * commonly to provide a default console (ie from PROM variables) when
+ * the user has not supplied one.
+ */
+int add_preferred_console(char *name, int idx, char *options)
+{
+ return __add_preferred_console(name, idx, options, NULL);
+}
+
+int update_console_cmdline(char *name, int idx, char *name_new, int idx_new, char *options)
+{
+ struct console_cmdline *c;
+ int i;
+
+ for (i = 0; i < MAX_CMDLINECONSOLES && console_cmdline[i].name[0]; i++)
+ if (strcmp(console_cmdline[i].name, name) == 0 &&
+ console_cmdline[i].index == idx) {
+ c = &console_cmdline[i];
+ strlcpy(c->name, name_new, sizeof(c->name));
+ c->name[sizeof(c->name) - 1] = 0;
+ c->options = options;
+ c->index = idx_new;
+ return i;
+ }
+ /* not found */
+ return -1;
+}
+
+bool console_suspend_enabled = 1;
+EXPORT_SYMBOL(console_suspend_enabled);
+
+static int __init console_suspend_disable(char *str)
+{
+ console_suspend_enabled = 0;
+ return 1;
+}
+__setup("no_console_suspend", console_suspend_disable);
+module_param_named(console_suspend, console_suspend_enabled,
+ bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(console_suspend, "suspend console during suspend"
+ " and hibernate operations");
+
+/**
+ * suspend_console - suspend the console subsystem
+ *
+ * This disables printk() while we go into suspend states
+ */
+void suspend_console(void)
+{
+ if (!console_suspend_enabled)
+ return;
+ printk("Suspending console(s) (use no_console_suspend to debug)\n");
+ console_lock();
+ console_suspended = 1;
+ up(&console_sem);
+}
+
+void resume_console(void)
+{
+ if (!console_suspend_enabled)
+ return;
+ down(&console_sem);
+ console_suspended = 0;
+ console_unlock();
+}
+
+/**
+ * console_cpu_notify - print deferred console messages after CPU hotplug
+ * @self: notifier struct
+ * @action: CPU hotplug event
+ * @hcpu: unused
+ *
+ * If printk() is called from a CPU that is not online yet, the messages
+ * will be spooled but will not show up on the console. This function is
+ * called when a new CPU comes online (or fails to come up), and ensures
+ * that any such output gets printed.
+ */
+static int __cpuinit console_cpu_notify(struct notifier_block *self,
+ unsigned long action, void *hcpu)
+{
+ switch (action) {
+ case CPU_ONLINE:
+ case CPU_DEAD:
+ case CPU_DOWN_FAILED:
+ case CPU_UP_CANCELED:
+ console_lock();
+ console_unlock();
+ }
+ return NOTIFY_OK;
+}
+
+/**
+ * console_lock - lock the console system for exclusive use.
+ *
+ * Acquires a lock which guarantees that the caller has
+ * exclusive access to the console system and the console_drivers list.
+ *
+ * Can sleep, returns nothing.
+ */
+void console_lock(void)
+{
+ BUG_ON(in_interrupt());
+ down(&console_sem);
+ if (console_suspended)
+ return;
+ console_locked = 1;
+ console_may_schedule = 1;
+}
+EXPORT_SYMBOL(console_lock);
+
+/**
+ * console_trylock - try to lock the console system for exclusive use.
+ *
+ * Tried to acquire a lock which guarantees that the caller has
+ * exclusive access to the console system and the console_drivers list.
+ *
+ * returns 1 on success, and 0 on failure to acquire the lock.
+ */
+int console_trylock(void)
+{
+ if (down_trylock(&console_sem))
+ return 0;
+ if (console_suspended) {
+ up(&console_sem);
+ return 0;
+ }
+ console_locked = 1;
+ console_may_schedule = 0;
+ return 1;
+}
+EXPORT_SYMBOL(console_trylock);
+
+int is_console_locked(void)
+{
+ return console_locked;
+}
+
+/*
+ * Delayed printk facility, for scheduler-internal messages:
+ */
+#define PRINTK_BUF_SIZE 512
+
+#define PRINTK_PENDING_WAKEUP 0x01
+#define PRINTK_PENDING_SCHED 0x02
+
+static DEFINE_PER_CPU(int, printk_pending);
+static DEFINE_PER_CPU(char [PRINTK_BUF_SIZE], printk_sched_buf);
+
+void printk_tick(void)
+{
+ if (__this_cpu_read(printk_pending)) {
+ int pending = __this_cpu_xchg(printk_pending, 0);
+ if (pending & PRINTK_PENDING_SCHED) {
+ char *buf = __get_cpu_var(printk_sched_buf);
+ printk(KERN_WARNING "[sched_delayed] %s", buf);
+ }
+ if (pending & PRINTK_PENDING_WAKEUP)
+ wake_up_interruptible(&log_wait);
+ }
+}
+
+int printk_needs_cpu(int cpu)
+{
+ if (unlikely(cpu_is_offline(cpu)))
+ __this_cpu_write(printk_pending, 0);
+ return __this_cpu_read(printk_pending);
+}
+
+void wake_up_klogd(void)
+{
+ if (waitqueue_active(&log_wait))
+ this_cpu_or(printk_pending, PRINTK_PENDING_WAKEUP);
+}
+
+/**
+ * console_unlock - unlock the console system
+ *
+ * Releases the console_lock which the caller holds on the console system
+ * and the console driver list.
+ *
+ * While the console_lock was held, console output may have been buffered
+ * by printk(). If this is the case, console_unlock(); emits
+ * the output prior to releasing the lock.
+ *
+ * If there is output waiting for klogd, we wake it up.
+ *
+ * console_unlock(); may be called from any context.
+ */
+void console_unlock(void)
+{
+ unsigned long flags;
+ unsigned _con_start, _log_end;
+ unsigned wake_klogd = 0, retry = 0;
+
+ if (console_suspended) {
+ up(&console_sem);
+ return;
+ }
+
+ console_may_schedule = 0;
+
+again:
+ for ( ; ; ) {
+ raw_spin_lock_irqsave(&logbuf_lock, flags);
+ wake_klogd |= log_start - log_end;
+ if (con_start == log_end)
+ break; /* Nothing to print */
+ _con_start = con_start;
+ _log_end = log_end;
+ con_start = log_end; /* Flush */
+#ifndef CONFIG_PREEMPT_RT_FULL
+ raw_spin_unlock(&logbuf_lock);
+ stop_critical_timings(); /* don't trace print latency */
+ call_console_drivers(_con_start, _log_end);
+ start_critical_timings();
+ local_irq_restore(flags);
+#else
+ raw_spin_unlock_irqrestore(&logbuf_lock, flags);
+ call_console_drivers(_con_start, _log_end);
+#endif
+ }
+ console_locked = 0;
+
+ /* Release the exclusive_console once it is used */
+ if (unlikely(exclusive_console))
+ exclusive_console = NULL;
+
+ raw_spin_unlock(&logbuf_lock);
+
+ up(&console_sem);
+
+ /*
+ * Someone could have filled up the buffer again, so re-check if there's
+ * something to flush. In case we cannot trylock the console_sem again,
+ * there's a new owner and the console_unlock() from them will do the
+ * flush, no worries.
+ */
+ raw_spin_lock(&logbuf_lock);
+ if (con_start != log_end)
+ retry = 1;
+ raw_spin_unlock_irqrestore(&logbuf_lock, flags);
+
+ if (retry && console_trylock())
+ goto again;
+
+ if (wake_klogd)
+ wake_up_klogd();
+}
+EXPORT_SYMBOL(console_unlock);
+
+/**
+ * console_conditional_schedule - yield the CPU if required
+ *
+ * If the console code is currently allowed to sleep, and
+ * if this CPU should yield the CPU to another task, do
+ * so here.
+ *
+ * Must be called within console_lock();.
+ */
+void __sched console_conditional_schedule(void)
+{
+ if (console_may_schedule)
+ cond_resched();
+}
+EXPORT_SYMBOL(console_conditional_schedule);
+
+void console_unblank(void)
+{
+ struct console *c;
+
+ /*
+ * console_unblank can no longer be called in interrupt context unless
+ * oops_in_progress is set to 1..
+ */
+ if (oops_in_progress) {
+ if (down_trylock(&console_sem) != 0)
+ return;
+ } else
+ console_lock();
+
+ console_locked = 1;
+ console_may_schedule = 0;
+ for_each_console(c)
+ if ((c->flags & CON_ENABLED) && c->unblank)
+ c->unblank();
+ console_unlock();
+}
+
+/*
+ * Return the console tty driver structure and its associated index
+ */
+struct tty_driver *console_device(int *index)
+{
+ struct console *c;
+ struct tty_driver *driver = NULL;
+
+ console_lock();
+ for_each_console(c) {
+ if (!c->device)
+ continue;
+ driver = c->device(c, index);
+ if (driver)
+ break;
+ }
+ console_unlock();
+ return driver;
+}
+
+/*
+ * Prevent further output on the passed console device so that (for example)
+ * serial drivers can disable console output before suspending a port, and can
+ * re-enable output afterwards.
+ */
+void console_stop(struct console *console)
+{
+ console_lock();
+ console->flags &= ~CON_ENABLED;
+ console_unlock();
+}
+EXPORT_SYMBOL(console_stop);
+
+void console_start(struct console *console)
+{
+ console_lock();
+ console->flags |= CON_ENABLED;
+ console_unlock();
+}
+EXPORT_SYMBOL(console_start);
+
+static int __read_mostly keep_bootcon;
+
+static int __init keep_bootcon_setup(char *str)
+{
+ keep_bootcon = 1;
+ printk(KERN_INFO "debug: skip boot console de-registration.\n");
+
+ return 0;
+}
+
+early_param("keep_bootcon", keep_bootcon_setup);
+
+/*
+ * The console driver calls this routine during kernel initialization
+ * to register the console printing procedure with printk() and to
+ * print any messages that were printed by the kernel before the
+ * console driver was initialized.
+ *
+ * This can happen pretty early during the boot process (because of
+ * early_printk) - sometimes before setup_arch() completes - be careful
+ * of what kernel features are used - they may not be initialised yet.
+ *
+ * There are two types of consoles - bootconsoles (early_printk) and
+ * "real" consoles (everything which is not a bootconsole) which are
+ * handled differently.
+ * - Any number of bootconsoles can be registered at any time.
+ * - As soon as a "real" console is registered, all bootconsoles
+ * will be unregistered automatically.
+ * - Once a "real" console is registered, any attempt to register a
+ * bootconsoles will be rejected
+ */
+void register_console(struct console *newcon)
+{
+ int i;
+ unsigned long flags;
+ struct console *bcon = NULL;
+
+ /*
+ * before we register a new CON_BOOT console, make sure we don't
+ * already have a valid console
+ */
+ if (console_drivers && newcon->flags & CON_BOOT) {
+ /* find the last or real console */
+ for_each_console(bcon) {
+ if (!(bcon->flags & CON_BOOT)) {
+ printk(KERN_INFO "Too late to register bootconsole %s%d\n",
+ newcon->name, newcon->index);
+ return;
+ }
+ }
+ }
+
+ if (console_drivers && console_drivers->flags & CON_BOOT)
+ bcon = console_drivers;
+
+ if (preferred_console < 0 || bcon || !console_drivers)
+ preferred_console = selected_console;
+
+ if (newcon->early_setup)
+ newcon->early_setup();
+
+ /*
+ * See if we want to use this console driver. If we
+ * didn't select a console we take the first one
+ * that registers here.
+ */
+ if (preferred_console < 0) {
+ if (newcon->index < 0)
+ newcon->index = 0;
+ if (newcon->setup == NULL ||
+ newcon->setup(newcon, NULL) == 0) {
+ newcon->flags |= CON_ENABLED;
+ if (newcon->device) {
+ newcon->flags |= CON_CONSDEV;
+ preferred_console = 0;
+ }
+ }
+ }
+
+ /*
+ * See if this console matches one we selected on
+ * the command line.
+ */
+ for (i = 0; i < MAX_CMDLINECONSOLES && console_cmdline[i].name[0];
+ i++) {
+ BUILD_BUG_ON(sizeof(console_cmdline[i].name) != sizeof(newcon->name));
+ if (strcmp(console_cmdline[i].name, newcon->name) != 0)
+ continue;
+ if (newcon->index >= 0 &&
+ newcon->index != console_cmdline[i].index)
+ continue;
+ if (newcon->index < 0)
+ newcon->index = console_cmdline[i].index;
+#ifdef CONFIG_A11Y_BRAILLE_CONSOLE
+ if (console_cmdline[i].brl_options) {
+ newcon->flags |= CON_BRL;
+ braille_register_console(newcon,
+ console_cmdline[i].index,
+ console_cmdline[i].options,
+ console_cmdline[i].brl_options);
+ return;
+ }
+#endif
+ if (newcon->setup &&
+ newcon->setup(newcon, console_cmdline[i].options) != 0)
+ break;
+ newcon->flags |= CON_ENABLED;
+ newcon->index = console_cmdline[i].index;
+ if (i == selected_console) {
+ newcon->flags |= CON_CONSDEV;
+ preferred_console = selected_console;
+ }
+ break;
+ }
+
+ if (!(newcon->flags & CON_ENABLED))
+ return;
+
+ /*
+ * If we have a bootconsole, and are switching to a real console,
+ * don't print everything out again, since when the boot console, and
+ * the real console are the same physical device, it's annoying to
+ * see the beginning boot messages twice
+ */
+ if (bcon && ((newcon->flags & (CON_CONSDEV | CON_BOOT)) == CON_CONSDEV))
+ newcon->flags &= ~CON_PRINTBUFFER;
+
+ /*
+ * Put this console in the list - keep the
+ * preferred driver at the head of the list.
+ */
+ console_lock();
+ if ((newcon->flags & CON_CONSDEV) || console_drivers == NULL) {
+ newcon->next = console_drivers;
+ console_drivers = newcon;
+ if (newcon->next)
+ newcon->next->flags &= ~CON_CONSDEV;
+ } else {
+ newcon->next = console_drivers->next;
+ console_drivers->next = newcon;
+ }
+ if (newcon->flags & CON_PRINTBUFFER) {
+ /*
+ * console_unlock(); will print out the buffered messages
+ * for us.
+ */
+ raw_spin_lock_irqsave(&logbuf_lock, flags);
+ con_start = log_start;
+ raw_spin_unlock_irqrestore(&logbuf_lock, flags);
+ /*
+ * We're about to replay the log buffer. Only do this to the
+ * just-registered console to avoid excessive message spam to
+ * the already-registered consoles.
+ */
+ exclusive_console = newcon;
+ }
+ console_unlock();
+ console_sysfs_notify();
+
+ /*
+ * By unregistering the bootconsoles after we enable the real console
+ * we get the "console xxx enabled" message on all the consoles -
+ * boot consoles, real consoles, etc - this is to ensure that end
+ * users know there might be something in the kernel's log buffer that
+ * went to the bootconsole (that they do not see on the real console)
+ */
+ if (bcon &&
+ ((newcon->flags & (CON_CONSDEV | CON_BOOT)) == CON_CONSDEV) &&
+ !keep_bootcon) {
+ /* we need to iterate through twice, to make sure we print
+ * everything out, before we unregister the console(s)
+ */
+ printk(KERN_INFO "console [%s%d] enabled, bootconsole disabled\n",
+ newcon->name, newcon->index);
+ for_each_console(bcon)
+ if (bcon->flags & CON_BOOT)
+ unregister_console(bcon);
+ } else {
+ printk(KERN_INFO "%sconsole [%s%d] enabled\n",
+ (newcon->flags & CON_BOOT) ? "boot" : "" ,
+ newcon->name, newcon->index);
+ }
+}
+EXPORT_SYMBOL(register_console);
+
+int unregister_console(struct console *console)
+{
+ struct console *a, *b;
+ int res = 1;
+
+#ifdef CONFIG_A11Y_BRAILLE_CONSOLE
+ if (console->flags & CON_BRL)
+ return braille_unregister_console(console);
+#endif
+
+ console_lock();
+ if (console_drivers == console) {
+ console_drivers=console->next;
+ res = 0;
+ } else if (console_drivers) {
+ for (a=console_drivers->next, b=console_drivers ;
+ a; b=a, a=b->next) {
+ if (a == console) {
+ b->next = a->next;
+ res = 0;
+ break;
+ }
+ }
+ }
+
+ /*
+ * If this isn't the last console and it has CON_CONSDEV set, we
+ * need to set it on the next preferred console.
+ */
+ if (console_drivers != NULL && console->flags & CON_CONSDEV)
+ console_drivers->flags |= CON_CONSDEV;
+
+ console_unlock();
+ console_sysfs_notify();
+ return res;
+}
+EXPORT_SYMBOL(unregister_console);
+
+static int __init printk_late_init(void)
+{
+ struct console *con;
+
+ for_each_console(con) {
+ if (!keep_bootcon && con->flags & CON_BOOT) {
+ printk(KERN_INFO "turn off boot console %s%d\n",
+ con->name, con->index);
+ unregister_console(con);
+ }
+ }
+ hotcpu_notifier(console_cpu_notify, 0);
+ return 0;
+}
+late_initcall(printk_late_init);
+
+#if defined CONFIG_PRINTK
+
+int printk_deferred(const char *fmt, ...)
+{
+ unsigned long flags;
+ va_list args;
+ char *buf;
+ int r;
+
+ local_irq_save(flags);
+ buf = __get_cpu_var(printk_sched_buf);
+
+ va_start(args, fmt);
+ r = vsnprintf(buf, PRINTK_BUF_SIZE, fmt, args);
+ va_end(args);
+
+ __this_cpu_or(printk_pending, PRINTK_PENDING_SCHED);
+ local_irq_restore(flags);
+
+ return r;
+}
+
+/*
+ * printk rate limiting, lifted from the networking subsystem.
+ *
+ * This enforces a rate limit: not more than 10 kernel messages
+ * every 5s to make a denial-of-service attack impossible.
+ */
+DEFINE_RATELIMIT_STATE(printk_ratelimit_state, 5 * HZ, 10);
+
+int __printk_ratelimit(const char *func)
+{
+ return ___ratelimit(&printk_ratelimit_state, func);
+}
+EXPORT_SYMBOL(__printk_ratelimit);
+
+/**
+ * printk_timed_ratelimit - caller-controlled printk ratelimiting
+ * @caller_jiffies: pointer to caller's state
+ * @interval_msecs: minimum interval between prints
+ *
+ * printk_timed_ratelimit() returns true if more than @interval_msecs
+ * milliseconds have elapsed since the last time printk_timed_ratelimit()
+ * returned true.
+ */
+bool printk_timed_ratelimit(unsigned long *caller_jiffies,
+ unsigned int interval_msecs)
+{
+ if (*caller_jiffies == 0
+ || !time_in_range(jiffies, *caller_jiffies,
+ *caller_jiffies
+ + msecs_to_jiffies(interval_msecs))) {
+ *caller_jiffies = jiffies;
+ return true;
+ }
+ return false;
+}
+EXPORT_SYMBOL(printk_timed_ratelimit);
+
+static DEFINE_SPINLOCK(dump_list_lock);
+static LIST_HEAD(dump_list);
+
+/**
+ * kmsg_dump_register - register a kernel log dumper.
+ * @dumper: pointer to the kmsg_dumper structure
+ *
+ * Adds a kernel log dumper to the system. The dump callback in the
+ * structure will be called when the kernel oopses or panics and must be
+ * set. Returns zero on success and %-EINVAL or %-EBUSY otherwise.
+ */
+int kmsg_dump_register(struct kmsg_dumper *dumper)
+{
+ unsigned long flags;
+ int err = -EBUSY;
+
+ /* The dump callback needs to be set */
+ if (!dumper->dump)
+ return -EINVAL;
+
+ spin_lock_irqsave(&dump_list_lock, flags);
+ /* Don't allow registering multiple times */
+ if (!dumper->registered) {
+ dumper->registered = 1;
+ list_add_tail_rcu(&dumper->list, &dump_list);
+ err = 0;
+ }
+ spin_unlock_irqrestore(&dump_list_lock, flags);
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(kmsg_dump_register);
+
+/**
+ * kmsg_dump_unregister - unregister a kmsg dumper.
+ * @dumper: pointer to the kmsg_dumper structure
+ *
+ * Removes a dump device from the system. Returns zero on success and
+ * %-EINVAL otherwise.
+ */
+int kmsg_dump_unregister(struct kmsg_dumper *dumper)
+{
+ unsigned long flags;
+ int err = -EINVAL;
+
+ spin_lock_irqsave(&dump_list_lock, flags);
+ if (dumper->registered) {
+ dumper->registered = 0;
+ list_del_rcu(&dumper->list);
+ err = 0;
+ }
+ spin_unlock_irqrestore(&dump_list_lock, flags);
+ synchronize_rcu();
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(kmsg_dump_unregister);
+
+/**
+ * kmsg_dump - dump kernel log to kernel message dumpers.
+ * @reason: the reason (oops, panic etc) for dumping
+ *
+ * Iterate through each of the dump devices and call the oops/panic
+ * callbacks with the log buffer.
+ */
+void kmsg_dump(enum kmsg_dump_reason reason)
+{
+ unsigned long end;
+ unsigned chars;
+ struct kmsg_dumper *dumper;
+ const char *s1, *s2;
+ unsigned long l1, l2;
+ unsigned long flags;
+
+ if ((reason > KMSG_DUMP_OOPS) && !always_kmsg_dump)
+ return;
+
+ /* Theoretically, the log could move on after we do this, but
+ there's not a lot we can do about that. The new messages
+ will overwrite the start of what we dump. */
+ raw_spin_lock_irqsave(&logbuf_lock, flags);
+ end = log_end & LOG_BUF_MASK;
+ chars = logged_chars;
+ raw_spin_unlock_irqrestore(&logbuf_lock, flags);
+
+ if (chars > end) {
+ s1 = log_buf + log_buf_len - chars + end;
+ l1 = chars - end;
+
+ s2 = log_buf;
+ l2 = end;
+ } else {
+ s1 = "";
+ l1 = 0;
+
+ s2 = log_buf + end - chars;
+ l2 = chars;
+ }
+
+ rcu_read_lock();
+ list_for_each_entry_rcu(dumper, &dump_list, list)
+ dumper->dump(dumper, reason, s1, l1, s2, l2);
+ rcu_read_unlock();
+}
+
+void get_logbuf_info(unsigned long *addr, unsigned long *size)
+{
+ *addr = __log_buf;
+ *size = __LOG_BUF_LEN;
+}
+EXPORT_SYMBOL(get_logbuf_info);
+
+#endif