[T106][ZXW-22]7520V3SCV2.01.01.02P42U09_VEC_V0.8_AP_VEC origin source commit
Change-Id: Ic6e05d89ecd62fc34f82b23dcf306c93764aec4b
diff --git a/boot/common/src/loader/include/i2c.h b/boot/common/src/loader/include/i2c.h
new file mode 100644
index 0000000..f7e55c8
--- /dev/null
+++ b/boot/common/src/loader/include/i2c.h
@@ -0,0 +1,85 @@
+/*
+ * (C) Copyright 2001
+ * Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * The original I2C interface was
+ * (C) 2000 by Paolo Scaffardi (arsenio@tin.it)
+ * AIRVENT SAM s.p.a - RIMINI(ITALY)
+ * but has been changed substantially.
+ */
+
+#ifndef _I2C_H_
+#define _I2C_H_
+
+/*
+ * WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING
+ *
+ * The implementation MUST NOT use static or global variables if the
+ * I2C routines are used to read SDRAM configuration information
+ * because this is done before the memories are initialized. Limited
+ * use of stack-based variables are OK (the initial stack size is
+ * limited).
+ *
+ * WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING
+ */
+
+/*
+ * Configuration items.
+ */
+#define I2C_RXTX_LEN 128 /* maximum tx/rx buffer length */
+
+/*
+ * Initialization, must be called once on start up, may be called
+ * repeatedly to change the speed and slave addresses.
+ */
+void i2c_init(int speed, int slaveaddr);
+#ifdef CFG_I2C_INIT_BOARD
+void i2c_init_board(void);
+#endif
+
+/*
+ * Probe the given I2C chip address. Returns 0 if a chip responded,
+ * not 0 on failure.
+ */
+int i2c_probe(uint8_t chip);
+
+/*
+ * Read/Write interface:
+ * chip: I2C chip address, range 0..127
+ * addr: Memory (register) address within the chip
+ * alen: Number of bytes to use for addr (typically 1, 2 for larger
+ * memories, 0 for register type devices with only one
+ * register)
+ * buffer: Where to read/write the data
+ * len: How many bytes to read/write
+ *
+ * Returns: 0 on success, not 0 on failure
+ */
+int i2c_read(uint8_t chip, uint addr, int alen, uchar *buffer, int len);
+int i2c_write(uint8_t chip, uint addr, int alen, uchar *buffer, int len);
+
+/*
+ * Utility routines to read/write registers.
+ */
+uchar i2c_reg_read (uint8_t chip, uint8_t reg);
+void i2c_reg_write(uint8_t chip, uint8_t reg, uint8_t val);
+
+#endif /* _I2C_H_ */