[T106][ZXW-22]7520V3SCV2.01.01.02P42U09_VEC_V0.8_AP_VEC origin source commit
Change-Id: Ic6e05d89ecd62fc34f82b23dcf306c93764aec4b
diff --git a/cap/zx297520v3/sources/meta-zxic-custom/tools/zxic-setup-release.sh b/cap/zx297520v3/sources/meta-zxic-custom/tools/zxic-setup-release.sh
new file mode 100755
index 0000000..dd9059b
--- /dev/null
+++ b/cap/zx297520v3/sources/meta-zxic-custom/tools/zxic-setup-release.sh
@@ -0,0 +1,143 @@
+#!/bin/sh
+#
+# zxic Yocto Project Build Environment Setup Script
+#
+. sources/meta-zxic-custom/tools/setup-utils.sh
+
+CWD=`pwd`
+PROGNAME="setup-environment"
+exit_message ()
+{
+ echo "To return to this build environment later please run:"
+ echo "source setup-environment <build_dir>"
+}
+
+usage()
+{
+ echo -e "\nUsage: source zxic-setup-release.sh
+ Optional parameters: [-b build-dir] [-h]"
+echo "
+ * [-b build-dir]: Build directory, if unspecified script uses 'build' as output directory
+ * [-h]: help
+"
+}
+
+clean_up()
+{
+ unset CWD BUILD_DIR
+ unset zxic_setup_help zxic_setup_error zxic_setup_flag
+ unset usage clean_up
+ exit_message clean_up
+}
+
+# get command line options
+OLD_OPTIND=$OPTIND
+
+while getopts "k:r:t:b:e:gh" zxic_setup_flag
+do
+ case $zxic_setup_flag in
+ b) BUILD_DIR="$OPTARG";
+ echo -e "\n Build directory is " $BUILD_DIR
+ ;;
+ h) zxic_setup_help='true';
+ ;;
+ \?) zxic_setup_error='true';
+ ;;
+ esac
+done
+shift $((OPTIND-1))
+if [ $# -ne 0 ]; then
+ zxic_setup_error=true
+ echo -e "Invalid command line ending: '$@'"
+fi
+OPTIND=$OLD_OPTIND
+if test $zxic_setup_help; then
+ usage && clean_up && return 1
+elif test $zxic_setup_error; then
+ clean_up && return 1
+fi
+
+if [ -z "$DISTRO" ]; then
+ DISTRO='cpe'
+fi
+
+if [ -z "$BUILD_DIR" ]; then
+ BUILD_DIR='build'
+fi
+
+if [ -z "$MACHINE" ]; then
+ MACHINE='zx297520v3'
+fi
+
+if [ -z "$SDK" ]; then
+ MK_SDK_VERSION='no'
+else
+ MK_SDK_VERSION=$SDK
+fi
+
+if [ -z "$BOOT_CTL" ]; then
+ BOOT_CTL='normal'
+else
+ BOOT_CTL=$BOOT_CTL
+fi
+
+if [ -z "$STRORAGE_CONF" ]; then
+ STRORAGE_CONF='nand-config-default'
+else
+ STRORAGE_CONF=$STRORAGE_CONF
+fi
+
+# Set up the basic yocto environment
+rm -fr $BUILD_DIR/conf/
+DISTRO=$DISTRO MACHINE=$MACHINE MK_SDK_VERSION=$MK_SDK_VERSION BOOT_CTL=$BOOT_CTL STRORAGE_CONF=$STRORAGE_CONF . ./$PROGNAME $BUILD_DIR
+
+# Point to the current directory since the last command changed the directory to $BUILD_DIR
+BUILD_DIR=.
+
+if [ ! -e $BUILD_DIR/conf/local.conf ]; then
+ echo -e "\n ERROR - No build directory is set yet. Run the 'setup-environment' script before running this script to create " $BUILD_DIR
+ echo -e "\n"
+ return 1
+fi
+
+# On the first script run, backup the local.conf file
+# Consecutive runs, it restores the backup and changes are appended on this one.
+if [ ! -e $BUILD_DIR/conf/local.conf.org ]; then
+ cp $BUILD_DIR/conf/local.conf $BUILD_DIR/conf/local.conf.org
+else
+ cp $BUILD_DIR/conf/local.conf.org $BUILD_DIR/conf/local.conf
+fi
+
+if [ ! -e $BUILD_DIR/conf/bblayers.conf.org ]; then
+ cp $BUILD_DIR/conf/bblayers.conf $BUILD_DIR/conf/bblayers.conf.org
+else
+ cp $BUILD_DIR/conf/bblayers.conf.org $BUILD_DIR/conf/bblayers.conf
+fi
+
+echo "" >> $BUILD_DIR/conf/bblayers.conf
+echo "# zxic Yocto Project Release layers" >> $BUILD_DIR/conf/bblayers.conf
+
+hook_in_layer meta-zxic-custom
+echo "" >> $BUILD_DIR/conf/bblayers.conf
+echo "BBLAYERS += \" \${BSPDIR}/sources/meta-zxic \"" >> $BUILD_DIR/conf/bblayers.conf
+##echo "BBLAYERS += \" \${BSPDIR}/sources/meta-selinux \"" >> $BUILD_DIR/conf/bblayers.conf
+##echo "BBLAYERS += \" \${BSPDIR}/sources/meta-zxic-selinux \"" >> $BUILD_DIR/conf/bblayers.conf
+#echo "BBLAYERS += \" \${BSPDIR}/sources/meta-toolchain/meta-external-toolchain \"" >> $BUILD_DIR/conf/bblayers.conf
+#echo "BBLAYERS += \" \${BSPDIR}/sources/meta-toolchain/meta-sourcery \"" >> $BUILD_DIR/conf/bblayers.conf
+
+echo "BBLAYERS += \" \${BSPDIR}/sources/meta-openembedded/meta-oe \"" >> $BUILD_DIR/conf/bblayers.conf
+echo "BBLAYERS += \" \${BSPDIR}/sources/meta-openembedded/meta-python \"" >> $BUILD_DIR/conf/bblayers.conf
+echo "BBLAYERS += \" \${BSPDIR}/sources/meta-openembedded/meta-networking \"" >> $BUILD_DIR/conf/bblayers.conf
+if [ x"$DISTRO" = x"cpe" ] || [ x"$DISTRO" = x"v2x-openwrt" ] || [ x"$DISTRO" = x"v2x-16bit" ]; then
+ echo "BBLAYERS += \" \${BSPDIR}/sources/meta-openwrt \"" >> $BUILD_DIR/conf/bblayers.conf
+ ## echo "BBLAYERS += \" \${BSPDIR}/sources/meta-zxic-openwrt-selinux \"" >> $BUILD_DIR/conf/bblayers.conf
+fi
+#TCLIBC=`bitbake -e | grep 'TCLIBC='|cut -d'=' -f2|tr -d '"'`
+#LIBCPATH=$(cat $(pwd)/../sources/meta-toolchain/toolchain/toolchain-$TCLIBC/toolchain-shar-extract.sh |grep 'LIBC_PATH='|cut -d'=' -f2|tr -d '"')
+#if [ ! -f $LIBCPATH/toolchain-shar-extract.sh ] ; then
+# . $(pwd)/../sources/meta-toolchain/toolchain/toolchain-$TCLIBC/toolchain-shar-extract.sh
+#fi
+
+cd $BUILD_DIR
+clean_up
+