[T106][ZXW-22]7520V3SCV2.01.01.02P42U09_VEC_V0.8_AP_VEC origin source commit
Change-Id: Ic6e05d89ecd62fc34f82b23dcf306c93764aec4b
diff --git a/cp/ps/driver/inc/pub/drvs_ret.h b/cp/ps/driver/inc/pub/drvs_ret.h
new file mode 100644
index 0000000..3792cf7
--- /dev/null
+++ b/cp/ps/driver/inc/pub/drvs_ret.h
@@ -0,0 +1,160 @@
+/*******************************************************************************
+ * Copyright (C) 2007, ZTE Corporation.
+ *
+ * File Name: Drvs_ret.h
+ * File Mark:
+ * Description: Provide the declaration of return types for HAL
+ * Others:
+ * Version: V0.5
+ * Author: xiongquan
+ * Date: 2008-12-01
+ * History 1:
+ * Date:
+ * Version:
+ * Author:
+ * Modification:
+ * History 2:
+ ********************************************************************************/
+#ifndef _DRVS_RET_H
+#define _DRVS_RET_H
+
+// the type numbers should be between -100 ~ -254
+typedef enum
+{
+ /* 0 ~ -29: commom */
+ DRV_SUCCESS = 0, /* successed */
+ DRV_ERROR = -1, /* failed */
+ DRV_ERR_INVALID_IOCTL_CMD = -2, /* no this control command branch */
+ DRV_ERR_NOT_SUPPORTED = -3, /* this function hasn't been supported */
+ DRV_ERR_INVALID_PARAM = -4, /* the input parameter is invalid */
+ DRV_ERR_MEM_ALLOC = -5, /* failed to malloc memory */
+ DRV_ERR_HISR_CREATE_FAIL = -6, /* failed to create hisr */
+ DRV_ERR_TIMEOUT = -7, /* timeout for a block waitting operation */
+ DRV_ERR_BUSY = -8, /* busy now to do the request operation */
+ DRV_ERR_NOT_OPENED = -9, /* the device to operate hasn't been opened yet */
+ DRV_ERR_OPEN_TIMES = -10, /* try to open a device which has been opened already */
+ DRV_ERR_NOT_STARTED = -11, /* the device to operate hasn't been started yet */
+ DRV_ERR_START_TIMES = -12, /* try to open a device which has been opened already */
+ /* reserved */
+
+ /* -30 ~ -39: for dal */
+ DRV_ERR_DEV_OVERFLOW = -30, /* no free entry to install this device. please change ZDRV_MAX_DEV_NUM in dal_api.h */
+ DRV_ERR_DEV_TABLE = -31, /* the device table has been destroyed */
+ DRV_ERR_FD_OVERFLOW = -32, /* no free entry to open this device. pleas change ZDRV_MAX_DEV_FILE_NUM in dal_api.h */
+ DRV_ERR_FD_TABLE = -33, /* the file descriptor table has been destroyed */
+ DRV_ERR_INSTALLED_TIMES = -34, /* try to install a device which hasn been installed yet */
+ DRV_ERR_NO_THIS_DEVICE = -35, /* try to open a device which hasn't been installed yet */
+ /* reserved */
+
+ /*-40 ~ -59: for sio */
+ DRV_ERR_NO_CHANNEL = -40, /*the used sio no channel*/
+ DRV_ERR_CHAN_CREATE_FAIL = -41, /*the sio creat channel fail*/
+ DRV_ERR_DEV_STATE_WRONG = -42, /*the sio state error*/
+ DRV_ERR_CHAN_DELETE_FAIL = -43, /*the sio delete channel fail*/
+ DRV_ERR_DEV_READ = -44, /*the sio read data error*/
+ DRV_ERR_CHAN_SEM_USED = -45, /*the sio semp has been used r*/
+ DRV_ERR_CHAN_DELETED = -46, /*the sio channel has been deleted */
+ DRV_ERR_DEV_CLOSED = -47, /*the sio has been closed */
+ DRV_ERR_DEV_OPT_NULL = -48, /*the sio device ptr is null*/
+ DRV_ERR_INSTALL_DRIVER_FAIL = -49, /*the sio install faill*/
+ DRV_ERR_BUFFER_NOT_ENOUGH = -50, /*the sio data buffer not enough*/
+ /* reserved */
+
+
+ /* -60 ~ 69: for mux */
+ DRV_ERR_MUX_INVALID_DLCI = -60, /* the dlci is invalid */
+ DRV_ERR_MUX_BUSY = -61, /* busy now, so the required operation has been rejected */
+ DRV_ERR_MUX_NOT_READY = -62, /* the mux or dlci is not ready to do this required operation */
+ DRV_ERR_MUX_FLOW_CONTROLED = -63, /* this dlc is flow-controled by the opposite station, so can't sent data any more */
+ DRV_ERR_MUX_PN_REJECTED = -64, /* the parameter for this dlc establishment is rejected by the opposite station */
+ DRV_ERR_MUX_BUF_IS_FULL = -65, /* the data buffer of this dlc is full, so can't write any more */
+ DRV_ERR_MUX_BUF_IS_EMPTY = -66, /* the data buffer of this dlc is empty, so no data to transfer */
+ DRV_ERR_MUX_FRAME_INVALID = -67, /* the frame data is invalid */
+ DRV_ERR_MUX_FRAME_UNCOMPLETE = -68, /* the frame data is uncomplete */
+
+ DRV_ERROR_EMPTY = -90,
+ DRV_ERROR_FULL = -91,
+ DRV_ERROR_NODEV = -92,
+ DRV_ERROR_SUSPEND = -93,
+ DRV_ERROR_AGAIN = -94,
+ DRV_ERROR_ABORT = -95,
+ DRV_ERROR_NOCONNECT = -96,
+
+ /*-100~-104 for spi*/
+ DRV_ERR_NOCOMPLETE = -100,
+
+ /*-105~-109 for gpio*/
+ DRV_ERR_NOT_WRITE = -105,
+
+ /*-110~-119 for pmic */
+ DRV_ERR_CLIENT_NBOVERFLOW = -110, /*!< The requested operation could not becompleted because there are too many PMIC client requests */
+ DRV_ERR_SPI_READ = -111,
+ DRV_ERR_SPI_WRITE = -112,
+ DRV_ERR_EVENT_NOT_SUBSCRIBED = -113, /*!< Event occur and not subscribed */
+ DRV_ERR_EVENT_CALL_BACK = -114, /*!< Error - bad call back */
+ DRV_ERR_UNSUBSCRIBE = -115, /*!< Error in un-subscribe event */
+
+ /*-120~-129 for sd */
+ DRV_ERR_INTR_TIMEOUT = -120,
+ DRV_ERR_INTR_ERROR = -121,
+ DRV_ERR_CARDSTATE_ERROR = -122,
+ DRV_ERR_CARD_DISCONNECT = -123,
+ DRV_ERR_WRITE_PROTECT = -124,
+ DRV_ERR_PWD_ERR = -125,
+ DRV_ERR_LOCKCARD_ERR = -126,
+ DRV_ERR_FORCEERASE_ERR = -127,
+ DRV_ERR_RESPONSE_ERR = -128,
+ DRV_ERR_HLE_ERROR = -129,
+ DRV_ERR_EIO = -130, /*IO Error*/
+ DRV_ERR_ERANGE = -131, /* Math result not representable */
+ DRV_ERR_EINPROGRESS = -132, /* Operation now in progress */
+ DRV_ERR_ENODEV = -133, /*no such device*/
+ DRV_ERR_BADMSG = -134, /*not a date message*/
+ DRV_ERR_ENOENT = -135, /* No such file or directory */
+ DRV_ERR_ILSEQ = -136, /* Illegal byte sequence */
+
+ /*-137~-140 for i2c */
+ DRV_ERR_ADDR_TRANSFER = -137,
+ DRV_ERR_DATA_TRANSFER = -138,
+ DRV_ERR_AGAIN = -139,
+ DRV_ERR_NOACK = -140,
+
+
+
+ /*-141~-156 for usb */
+ DRV_ERR_NOT_READY = -141,
+ DRV_ERR_STATUS_BUSY = -142,
+ DRV_ERR_STALL = -143,
+ DRV_ERR_END = -144,
+ DRV_ERR_USB_BUF_STATE = -145,
+ DRV_ERR_USB_BUF_FULL = -146,
+ DRV_ERR_USB_BUF_EMPTY = -147,
+ DRV_ERR_USB_QMI_UNDERRUN = -148,
+ DRV_ERR_USB_QMI_OVERRUN = -149,
+ DRV_ERR_USB_QMI_READ0 = -150,
+ DRV_ERR_USB_UNCONNECTED = -151,
+ DRV_ERR_QMI_HEADER_ERR = -152,
+ DRV_ERR_QMI_CTL_ERR = -153,
+ DRV_ERR_QMI_WDS_ERR = -154,
+ DRV_ERR_QMI_DMS_ERR = -155,
+ DRV_ERR_QMI_NAS_ERR = -156,
+
+ /*-160~-180 for nand */
+ DRV_ERR_LEN_ADDRESS = -160, /* ²Ù×÷µØÖ·´íÎó */
+ DRV_ERR_COMMAND = -161, /* ÃüÁîÂë´íÎó */
+ DRV_ERR_PE_ERROR = -162, /* ÉÕд´íÎó */
+ DRV_ERR_NAND_BUSY = -163, /* оƬæ */
+ DRV_ERR_PROTECTED = -164, /* ±£»¤ÇøÓò */
+ DRV_ERR_BANK_ERROR = -165, /* BANK´íÎó */
+ DRV_ERR_UNKNOWN = -166, /* UNKNOWN´íÎó */
+ DRV_ERR_LENGTH = -167,
+
+ /*-150~-154 for backlight */
+ DRV_ERR_INTERNAL_PERIOD = -180,
+ DRV_ERR_INTERNAL_FREQ = -181
+
+
+}T_DRVS_RETURN_TYPE;
+
+#endif
+