| /******************************************************************************* | |
| * Copyright (C) 2007, ZTE Corporation. | |
| * | |
| * File Name: Drvs_ret.h | |
| * File Mark: | |
| * Description: Provide the declaration of return types for HAL | |
| * Others: | |
| * Version: V0.5 | |
| * Author: xiongquan | |
| * Date: 2008-12-01 | |
| * History 1: | |
| * Date: | |
| * Version: | |
| * Author: | |
| * Modification: | |
| * History 2: | |
| ********************************************************************************/ | |
| #ifndef _DRVS_RET_H | |
| #define _DRVS_RET_H | |
| // the type numbers should be between -100 ~ -254 | |
| typedef enum | |
| { | |
| /* 0 ~ -29: commom */ | |
| DRV_SUCCESS = 0, /* successed */ | |
| DRV_ERROR = -1, /* failed */ | |
| DRV_ERR_INVALID_IOCTL_CMD = -2, /* no this control command branch */ | |
| DRV_ERR_NOT_SUPPORTED = -3, /* this function hasn't been supported */ | |
| DRV_ERR_INVALID_PARAM = -4, /* the input parameter is invalid */ | |
| DRV_ERR_MEM_ALLOC = -5, /* failed to malloc memory */ | |
| DRV_ERR_HISR_CREATE_FAIL = -6, /* failed to create hisr */ | |
| DRV_ERR_TIMEOUT = -7, /* timeout for a block waitting operation */ | |
| DRV_ERR_BUSY = -8, /* busy now to do the request operation */ | |
| DRV_ERR_NOT_OPENED = -9, /* the device to operate hasn't been opened yet */ | |
| DRV_ERR_OPEN_TIMES = -10, /* try to open a device which has been opened already */ | |
| DRV_ERR_NOT_STARTED = -11, /* the device to operate hasn't been started yet */ | |
| DRV_ERR_START_TIMES = -12, /* try to open a device which has been opened already */ | |
| /* reserved */ | |
| /* -30 ~ -39: for dal */ | |
| DRV_ERR_DEV_OVERFLOW = -30, /* no free entry to install this device. please change ZDRV_MAX_DEV_NUM in dal_api.h */ | |
| DRV_ERR_DEV_TABLE = -31, /* the device table has been destroyed */ | |
| DRV_ERR_FD_OVERFLOW = -32, /* no free entry to open this device. pleas change ZDRV_MAX_DEV_FILE_NUM in dal_api.h */ | |
| DRV_ERR_FD_TABLE = -33, /* the file descriptor table has been destroyed */ | |
| DRV_ERR_INSTALLED_TIMES = -34, /* try to install a device which hasn been installed yet */ | |
| DRV_ERR_NO_THIS_DEVICE = -35, /* try to open a device which hasn't been installed yet */ | |
| /* reserved */ | |
| /*-40 ~ -59: for sio */ | |
| DRV_ERR_NO_CHANNEL = -40, /*the used sio no channel*/ | |
| DRV_ERR_CHAN_CREATE_FAIL = -41, /*the sio creat channel fail*/ | |
| DRV_ERR_DEV_STATE_WRONG = -42, /*the sio state error*/ | |
| DRV_ERR_CHAN_DELETE_FAIL = -43, /*the sio delete channel fail*/ | |
| DRV_ERR_DEV_READ = -44, /*the sio read data error*/ | |
| DRV_ERR_CHAN_SEM_USED = -45, /*the sio semp has been used r*/ | |
| DRV_ERR_CHAN_DELETED = -46, /*the sio channel has been deleted */ | |
| DRV_ERR_DEV_CLOSED = -47, /*the sio has been closed */ | |
| DRV_ERR_DEV_OPT_NULL = -48, /*the sio device ptr is null*/ | |
| DRV_ERR_INSTALL_DRIVER_FAIL = -49, /*the sio install faill*/ | |
| DRV_ERR_BUFFER_NOT_ENOUGH = -50, /*the sio data buffer not enough*/ | |
| /* reserved */ | |
| /* -60 ~ 69: for mux */ | |
| DRV_ERR_MUX_INVALID_DLCI = -60, /* the dlci is invalid */ | |
| DRV_ERR_MUX_BUSY = -61, /* busy now, so the required operation has been rejected */ | |
| DRV_ERR_MUX_NOT_READY = -62, /* the mux or dlci is not ready to do this required operation */ | |
| DRV_ERR_MUX_FLOW_CONTROLED = -63, /* this dlc is flow-controled by the opposite station, so can't sent data any more */ | |
| DRV_ERR_MUX_PN_REJECTED = -64, /* the parameter for this dlc establishment is rejected by the opposite station */ | |
| DRV_ERR_MUX_BUF_IS_FULL = -65, /* the data buffer of this dlc is full, so can't write any more */ | |
| DRV_ERR_MUX_BUF_IS_EMPTY = -66, /* the data buffer of this dlc is empty, so no data to transfer */ | |
| DRV_ERR_MUX_FRAME_INVALID = -67, /* the frame data is invalid */ | |
| DRV_ERR_MUX_FRAME_UNCOMPLETE = -68, /* the frame data is uncomplete */ | |
| DRV_ERROR_EMPTY = -90, | |
| DRV_ERROR_FULL = -91, | |
| DRV_ERROR_NODEV = -92, | |
| DRV_ERROR_SUSPEND = -93, | |
| DRV_ERROR_AGAIN = -94, | |
| DRV_ERROR_ABORT = -95, | |
| DRV_ERROR_NOCONNECT = -96, | |
| /*-100~-104 for spi*/ | |
| DRV_ERR_NOCOMPLETE = -100, | |
| /*-105~-109 for gpio*/ | |
| DRV_ERR_NOT_WRITE = -105, | |
| /*-110~-119 for pmic */ | |
| DRV_ERR_CLIENT_NBOVERFLOW = -110, /*!< The requested operation could not becompleted because there are too many PMIC client requests */ | |
| DRV_ERR_SPI_READ = -111, | |
| DRV_ERR_SPI_WRITE = -112, | |
| DRV_ERR_EVENT_NOT_SUBSCRIBED = -113, /*!< Event occur and not subscribed */ | |
| DRV_ERR_EVENT_CALL_BACK = -114, /*!< Error - bad call back */ | |
| DRV_ERR_UNSUBSCRIBE = -115, /*!< Error in un-subscribe event */ | |
| /*-120~-129 for sd */ | |
| DRV_ERR_INTR_TIMEOUT = -120, | |
| DRV_ERR_INTR_ERROR = -121, | |
| DRV_ERR_CARDSTATE_ERROR = -122, | |
| DRV_ERR_CARD_DISCONNECT = -123, | |
| DRV_ERR_WRITE_PROTECT = -124, | |
| DRV_ERR_PWD_ERR = -125, | |
| DRV_ERR_LOCKCARD_ERR = -126, | |
| DRV_ERR_FORCEERASE_ERR = -127, | |
| DRV_ERR_RESPONSE_ERR = -128, | |
| DRV_ERR_HLE_ERROR = -129, | |
| DRV_ERR_EIO = -130, /*IO Error*/ | |
| DRV_ERR_ERANGE = -131, /* Math result not representable */ | |
| DRV_ERR_EINPROGRESS = -132, /* Operation now in progress */ | |
| DRV_ERR_ENODEV = -133, /*no such device*/ | |
| DRV_ERR_BADMSG = -134, /*not a date message*/ | |
| DRV_ERR_ENOENT = -135, /* No such file or directory */ | |
| DRV_ERR_ILSEQ = -136, /* Illegal byte sequence */ | |
| /*-137~-140 for i2c */ | |
| DRV_ERR_ADDR_TRANSFER = -137, | |
| DRV_ERR_DATA_TRANSFER = -138, | |
| DRV_ERR_AGAIN = -139, | |
| DRV_ERR_NOACK = -140, | |
| /*-141~-156 for usb */ | |
| DRV_ERR_NOT_READY = -141, | |
| DRV_ERR_STATUS_BUSY = -142, | |
| DRV_ERR_STALL = -143, | |
| DRV_ERR_END = -144, | |
| DRV_ERR_USB_BUF_STATE = -145, | |
| DRV_ERR_USB_BUF_FULL = -146, | |
| DRV_ERR_USB_BUF_EMPTY = -147, | |
| DRV_ERR_USB_QMI_UNDERRUN = -148, | |
| DRV_ERR_USB_QMI_OVERRUN = -149, | |
| DRV_ERR_USB_QMI_READ0 = -150, | |
| DRV_ERR_USB_UNCONNECTED = -151, | |
| DRV_ERR_QMI_HEADER_ERR = -152, | |
| DRV_ERR_QMI_CTL_ERR = -153, | |
| DRV_ERR_QMI_WDS_ERR = -154, | |
| DRV_ERR_QMI_DMS_ERR = -155, | |
| DRV_ERR_QMI_NAS_ERR = -156, | |
| /*-160~-180 for nand */ | |
| DRV_ERR_LEN_ADDRESS = -160, /* ²Ù×÷µØÖ·´íÎó */ | |
| DRV_ERR_COMMAND = -161, /* ÃüÁîÂë´íÎó */ | |
| DRV_ERR_PE_ERROR = -162, /* ÉÕд´íÎó */ | |
| DRV_ERR_NAND_BUSY = -163, /* оƬæ */ | |
| DRV_ERR_PROTECTED = -164, /* ±£»¤ÇøÓò */ | |
| DRV_ERR_BANK_ERROR = -165, /* BANK´íÎó */ | |
| DRV_ERR_UNKNOWN = -166, /* UNKNOWN´íÎó */ | |
| DRV_ERR_LENGTH = -167, | |
| /*-150~-154 for backlight */ | |
| DRV_ERR_INTERNAL_PERIOD = -180, | |
| DRV_ERR_INTERNAL_FREQ = -181 | |
| }T_DRVS_RETURN_TYPE; | |
| #endif | |