| #include <linux/ieee80211.h> | 
 | #include <linux/export.h> | 
 | #include <net/cfg80211.h> | 
 | #include "nl80211.h" | 
 | #include "core.h" | 
 |  | 
 | /* Default values, timeouts in ms */ | 
 | #define MESH_TTL 		31 | 
 | #define MESH_DEFAULT_ELEMENT_TTL 31 | 
 | #define MESH_MAX_RETR	 	3 | 
 | #define MESH_RET_T 		100 | 
 | #define MESH_CONF_T 		100 | 
 | #define MESH_HOLD_T 		100 | 
 |  | 
 | #define MESH_PATH_TIMEOUT	5000 | 
 | #define MESH_RANN_INTERVAL      5000 | 
 |  | 
 | /* | 
 |  * Minimum interval between two consecutive PREQs originated by the same | 
 |  * interface | 
 |  */ | 
 | #define MESH_PREQ_MIN_INT	10 | 
 | #define MESH_PERR_MIN_INT	100 | 
 | #define MESH_DIAM_TRAVERSAL_TIME 50 | 
 |  | 
 | #define MESH_RSSI_THRESHOLD	0 | 
 |  | 
 | /* | 
 |  * A path will be refreshed if it is used PATH_REFRESH_TIME milliseconds | 
 |  * before timing out.  This way it will remain ACTIVE and no data frames | 
 |  * will be unnecessarily held in the pending queue. | 
 |  */ | 
 | #define MESH_PATH_REFRESH_TIME			1000 | 
 | #define MESH_MIN_DISCOVERY_TIMEOUT (2 * MESH_DIAM_TRAVERSAL_TIME) | 
 |  | 
 | /* Default maximum number of established plinks per interface */ | 
 | #define MESH_MAX_ESTAB_PLINKS	32 | 
 |  | 
 | #define MESH_MAX_PREQ_RETRIES	4 | 
 |  | 
 |  | 
 | const struct mesh_config default_mesh_config = { | 
 | 	.dot11MeshRetryTimeout = MESH_RET_T, | 
 | 	.dot11MeshConfirmTimeout = MESH_CONF_T, | 
 | 	.dot11MeshHoldingTimeout = MESH_HOLD_T, | 
 | 	.dot11MeshMaxRetries = MESH_MAX_RETR, | 
 | 	.dot11MeshTTL = MESH_TTL, | 
 | 	.element_ttl = MESH_DEFAULT_ELEMENT_TTL, | 
 | 	.auto_open_plinks = true, | 
 | 	.dot11MeshMaxPeerLinks = MESH_MAX_ESTAB_PLINKS, | 
 | 	.dot11MeshHWMPactivePathTimeout = MESH_PATH_TIMEOUT, | 
 | 	.dot11MeshHWMPpreqMinInterval = MESH_PREQ_MIN_INT, | 
 | 	.dot11MeshHWMPperrMinInterval = MESH_PERR_MIN_INT, | 
 | 	.dot11MeshHWMPnetDiameterTraversalTime = MESH_DIAM_TRAVERSAL_TIME, | 
 | 	.dot11MeshHWMPmaxPREQretries = MESH_MAX_PREQ_RETRIES, | 
 | 	.path_refresh_time = MESH_PATH_REFRESH_TIME, | 
 | 	.min_discovery_timeout = MESH_MIN_DISCOVERY_TIMEOUT, | 
 | 	.dot11MeshHWMPRannInterval = MESH_RANN_INTERVAL, | 
 | 	.dot11MeshGateAnnouncementProtocol = false, | 
 | 	.dot11MeshForwarding = true, | 
 | 	.rssi_threshold = MESH_RSSI_THRESHOLD, | 
 | }; | 
 |  | 
 | const struct mesh_setup default_mesh_setup = { | 
 | 	.path_sel_proto = IEEE80211_PATH_PROTOCOL_HWMP, | 
 | 	.path_metric = IEEE80211_PATH_METRIC_AIRTIME, | 
 | 	.ie = NULL, | 
 | 	.ie_len = 0, | 
 | 	.is_secure = false, | 
 | }; | 
 |  | 
 | int __cfg80211_join_mesh(struct cfg80211_registered_device *rdev, | 
 | 			 struct net_device *dev, | 
 | 			 const struct mesh_setup *setup, | 
 | 			 const struct mesh_config *conf) | 
 | { | 
 | 	struct wireless_dev *wdev = dev->ieee80211_ptr; | 
 | 	int err; | 
 |  | 
 | 	BUILD_BUG_ON(IEEE80211_MAX_SSID_LEN != IEEE80211_MAX_MESH_ID_LEN); | 
 |  | 
 | 	ASSERT_WDEV_LOCK(wdev); | 
 |  | 
 | 	if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_MESH_POINT) | 
 | 		return -EOPNOTSUPP; | 
 |  | 
 | 	if (!(rdev->wiphy.flags & WIPHY_FLAG_MESH_AUTH) && | 
 | 	      setup->is_secure) | 
 | 		return -EOPNOTSUPP; | 
 |  | 
 | 	if (wdev->mesh_id_len) | 
 | 		return -EALREADY; | 
 |  | 
 | 	if (!setup->mesh_id_len) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (!rdev->ops->join_mesh) | 
 | 		return -EOPNOTSUPP; | 
 |  | 
 | 	err = rdev->ops->join_mesh(&rdev->wiphy, dev, conf, setup); | 
 | 	if (!err) { | 
 | 		memcpy(wdev->ssid, setup->mesh_id, setup->mesh_id_len); | 
 | 		wdev->mesh_id_len = setup->mesh_id_len; | 
 | 	} | 
 |  | 
 | 	return err; | 
 | } | 
 |  | 
 | int cfg80211_join_mesh(struct cfg80211_registered_device *rdev, | 
 | 		       struct net_device *dev, | 
 | 		       const struct mesh_setup *setup, | 
 | 		       const struct mesh_config *conf) | 
 | { | 
 | 	struct wireless_dev *wdev = dev->ieee80211_ptr; | 
 | 	int err; | 
 |  | 
 | 	wdev_lock(wdev); | 
 | 	err = __cfg80211_join_mesh(rdev, dev, setup, conf); | 
 | 	wdev_unlock(wdev); | 
 |  | 
 | 	return err; | 
 | } | 
 |  | 
 | void cfg80211_notify_new_peer_candidate(struct net_device *dev, | 
 | 		const u8 *macaddr, const u8* ie, u8 ie_len, gfp_t gfp) | 
 | { | 
 | 	struct wireless_dev *wdev = dev->ieee80211_ptr; | 
 |  | 
 | 	if (WARN_ON(wdev->iftype != NL80211_IFTYPE_MESH_POINT)) | 
 | 		return; | 
 |  | 
 | 	nl80211_send_new_peer_candidate(wiphy_to_dev(wdev->wiphy), dev, | 
 | 			macaddr, ie, ie_len, gfp); | 
 | } | 
 | EXPORT_SYMBOL(cfg80211_notify_new_peer_candidate); | 
 |  | 
 | static int __cfg80211_leave_mesh(struct cfg80211_registered_device *rdev, | 
 | 				 struct net_device *dev) | 
 | { | 
 | 	struct wireless_dev *wdev = dev->ieee80211_ptr; | 
 | 	int err; | 
 |  | 
 | 	ASSERT_WDEV_LOCK(wdev); | 
 |  | 
 | 	if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_MESH_POINT) | 
 | 		return -EOPNOTSUPP; | 
 |  | 
 | 	if (!rdev->ops->leave_mesh) | 
 | 		return -EOPNOTSUPP; | 
 |  | 
 | 	if (!wdev->mesh_id_len) | 
 | 		return -ENOTCONN; | 
 |  | 
 | 	err = rdev->ops->leave_mesh(&rdev->wiphy, dev); | 
 | 	if (!err) | 
 | 		wdev->mesh_id_len = 0; | 
 | 	return err; | 
 | } | 
 |  | 
 | int cfg80211_leave_mesh(struct cfg80211_registered_device *rdev, | 
 | 			struct net_device *dev) | 
 | { | 
 | 	struct wireless_dev *wdev = dev->ieee80211_ptr; | 
 | 	int err; | 
 |  | 
 | 	wdev_lock(wdev); | 
 | 	err = __cfg80211_leave_mesh(rdev, dev); | 
 | 	wdev_unlock(wdev); | 
 |  | 
 | 	return err; | 
 | } |