| /* | 
 |  *   This program is free software; you can redistribute it and/or modify | 
 |  *   it under the terms of the GNU General Public License as published by | 
 |  *   the Free Software Foundation; either version 2 of the License, or | 
 |  *   (at your option) any later version. | 
 |  * | 
 |  *   This program is distributed in the hope that it will be useful, | 
 |  *   but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 |  *   GNU General Public License for more details. | 
 |  * | 
 |  *   You should have received a copy of the GNU General Public License | 
 |  *   along with this program; if not, write to the Free Software | 
 |  *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA | 
 |  * | 
 |  */ | 
 |  | 
 | #include <linux/gfp.h> | 
 | #include <linux/init.h> | 
 | #include <linux/ratelimit.h> | 
 | #include <linux/usb.h> | 
 | #include <linux/usb/audio.h> | 
 |  | 
 | #include <sound/core.h> | 
 | #include <sound/pcm.h> | 
 |  | 
 | #include "usbaudio.h" | 
 | #include "helper.h" | 
 | #include "card.h" | 
 | #include "endpoint.h" | 
 | #include "pcm.h" | 
 |  | 
 | /* | 
 |  * convert a sampling rate into our full speed format (fs/1000 in Q16.16) | 
 |  * this will overflow at approx 524 kHz | 
 |  */ | 
 | static inline unsigned get_usb_full_speed_rate(unsigned int rate) | 
 | { | 
 | 	return ((rate << 13) + 62) / 125; | 
 | } | 
 |  | 
 | /* | 
 |  * convert a sampling rate into USB high speed format (fs/8000 in Q16.16) | 
 |  * this will overflow at approx 4 MHz | 
 |  */ | 
 | static inline unsigned get_usb_high_speed_rate(unsigned int rate) | 
 | { | 
 | 	return ((rate << 10) + 62) / 125; | 
 | } | 
 |  | 
 | /* | 
 |  * unlink active urbs. | 
 |  */ | 
 | static int deactivate_urbs(struct snd_usb_substream *subs, int force, int can_sleep) | 
 | { | 
 | 	struct snd_usb_audio *chip = subs->stream->chip; | 
 | 	unsigned int i; | 
 | 	int async; | 
 |  | 
 | 	subs->running = 0; | 
 |  | 
 | 	if (!force && subs->stream->chip->shutdown) /* to be sure... */ | 
 | 		return -EBADFD; | 
 |  | 
 | 	async = !can_sleep && chip->async_unlink; | 
 |  | 
 | 	if (!async && in_interrupt()) | 
 | 		return 0; | 
 |  | 
 | 	for (i = 0; i < subs->nurbs; i++) { | 
 | 		if (test_bit(i, &subs->active_mask)) { | 
 | 			if (!test_and_set_bit(i, &subs->unlink_mask)) { | 
 | 				struct urb *u = subs->dataurb[i].urb; | 
 | 				if (async) | 
 | 					usb_unlink_urb(u); | 
 | 				else | 
 | 					usb_kill_urb(u); | 
 | 			} | 
 | 		} | 
 | 	} | 
 | 	if (subs->syncpipe) { | 
 | 		for (i = 0; i < SYNC_URBS; i++) { | 
 | 			if (test_bit(i+16, &subs->active_mask)) { | 
 | 				if (!test_and_set_bit(i+16, &subs->unlink_mask)) { | 
 | 					struct urb *u = subs->syncurb[i].urb; | 
 | 					if (async) | 
 | 						usb_unlink_urb(u); | 
 | 					else | 
 | 						usb_kill_urb(u); | 
 | 				} | 
 | 			} | 
 | 		} | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 |  | 
 | /* | 
 |  * release a urb data | 
 |  */ | 
 | static void release_urb_ctx(struct snd_urb_ctx *u) | 
 | { | 
 | 	if (u->urb) { | 
 | 		if (u->buffer_size) | 
 | 			usb_free_coherent(u->subs->dev, u->buffer_size, | 
 | 					u->urb->transfer_buffer, | 
 | 					u->urb->transfer_dma); | 
 | 		usb_free_urb(u->urb); | 
 | 		u->urb = NULL; | 
 | 	} | 
 | } | 
 |  | 
 | /* | 
 |  *  wait until all urbs are processed. | 
 |  */ | 
 | static int wait_clear_urbs(struct snd_usb_substream *subs) | 
 | { | 
 | 	unsigned long end_time = jiffies + msecs_to_jiffies(1000); | 
 | 	unsigned int i; | 
 | 	int alive; | 
 |  | 
 | 	do { | 
 | 		alive = 0; | 
 | 		for (i = 0; i < subs->nurbs; i++) { | 
 | 			if (test_bit(i, &subs->active_mask)) | 
 | 				alive++; | 
 | 		} | 
 | 		if (subs->syncpipe) { | 
 | 			for (i = 0; i < SYNC_URBS; i++) { | 
 | 				if (test_bit(i + 16, &subs->active_mask)) | 
 | 					alive++; | 
 | 			} | 
 | 		} | 
 | 		if (! alive) | 
 | 			break; | 
 | 		schedule_timeout_uninterruptible(1); | 
 | 	} while (time_before(jiffies, end_time)); | 
 | 	if (alive) | 
 | 		snd_printk(KERN_ERR "timeout: still %d active urbs..\n", alive); | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * release a substream | 
 |  */ | 
 | void snd_usb_release_substream_urbs(struct snd_usb_substream *subs, int force) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	/* stop urbs (to be sure) */ | 
 | 	deactivate_urbs(subs, force, 1); | 
 | 	wait_clear_urbs(subs); | 
 |  | 
 | 	for (i = 0; i < MAX_URBS; i++) | 
 | 		release_urb_ctx(&subs->dataurb[i]); | 
 | 	for (i = 0; i < SYNC_URBS; i++) | 
 | 		release_urb_ctx(&subs->syncurb[i]); | 
 | 	usb_free_coherent(subs->dev, SYNC_URBS * 4, | 
 | 			subs->syncbuf, subs->sync_dma); | 
 | 	subs->syncbuf = NULL; | 
 | 	subs->nurbs = 0; | 
 | } | 
 |  | 
 | /* | 
 |  * complete callback from data urb | 
 |  */ | 
 | static void snd_complete_urb(struct urb *urb) | 
 | { | 
 | 	struct snd_urb_ctx *ctx = urb->context; | 
 | 	struct snd_usb_substream *subs = ctx->subs; | 
 | 	struct snd_pcm_substream *substream = ctx->subs->pcm_substream; | 
 | 	int err = 0; | 
 |  | 
 | 	if ((subs->running && subs->ops.retire(subs, substream->runtime, urb)) || | 
 | 	    !subs->running || /* can be stopped during retire callback */ | 
 | 	    (err = subs->ops.prepare(subs, substream->runtime, urb)) < 0 || | 
 | 	    (err = usb_submit_urb(urb, GFP_ATOMIC)) < 0) { | 
 | 		clear_bit(ctx->index, &subs->active_mask); | 
 | 		if (err < 0) { | 
 | 			snd_printd(KERN_ERR "cannot submit urb (err = %d)\n", err); | 
 | 			snd_pcm_stop(substream, SNDRV_PCM_STATE_XRUN); | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 |  | 
 | /* | 
 |  * complete callback from sync urb | 
 |  */ | 
 | static void snd_complete_sync_urb(struct urb *urb) | 
 | { | 
 | 	struct snd_urb_ctx *ctx = urb->context; | 
 | 	struct snd_usb_substream *subs = ctx->subs; | 
 | 	struct snd_pcm_substream *substream = ctx->subs->pcm_substream; | 
 | 	int err = 0; | 
 |  | 
 | 	if ((subs->running && subs->ops.retire_sync(subs, substream->runtime, urb)) || | 
 | 	    !subs->running || /* can be stopped during retire callback */ | 
 | 	    (err = subs->ops.prepare_sync(subs, substream->runtime, urb)) < 0 || | 
 | 	    (err = usb_submit_urb(urb, GFP_ATOMIC)) < 0) { | 
 | 		clear_bit(ctx->index + 16, &subs->active_mask); | 
 | 		if (err < 0) { | 
 | 			snd_printd(KERN_ERR "cannot submit sync urb (err = %d)\n", err); | 
 | 			snd_pcm_stop(substream, SNDRV_PCM_STATE_XRUN); | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 |  | 
 | /* | 
 |  * initialize a substream for plaback/capture | 
 |  */ | 
 | int snd_usb_init_substream_urbs(struct snd_usb_substream *subs, | 
 | 				unsigned int period_bytes, | 
 | 				unsigned int rate, | 
 | 				unsigned int frame_bits) | 
 | { | 
 | 	unsigned int maxsize, i; | 
 | 	int is_playback = subs->direction == SNDRV_PCM_STREAM_PLAYBACK; | 
 | 	unsigned int urb_packs, total_packs, packs_per_ms; | 
 | 	struct snd_usb_audio *chip = subs->stream->chip; | 
 |  | 
 | 	/* calculate the frequency in 16.16 format */ | 
 | 	if (snd_usb_get_speed(subs->dev) == USB_SPEED_FULL) | 
 | 		subs->freqn = get_usb_full_speed_rate(rate); | 
 | 	else | 
 | 		subs->freqn = get_usb_high_speed_rate(rate); | 
 | 	subs->freqm = subs->freqn; | 
 | 	subs->freqshift = INT_MIN; | 
 | 	/* calculate max. frequency */ | 
 | 	if (subs->maxpacksize) { | 
 | 		/* whatever fits into a max. size packet */ | 
 | 		maxsize = subs->maxpacksize; | 
 | 		subs->freqmax = (maxsize / (frame_bits >> 3)) | 
 | 				<< (16 - subs->datainterval); | 
 | 	} else { | 
 | 		/* no max. packet size: just take 25% higher than nominal */ | 
 | 		subs->freqmax = subs->freqn + (subs->freqn >> 2); | 
 | 		maxsize = ((subs->freqmax + 0xffff) * (frame_bits >> 3)) | 
 | 				>> (16 - subs->datainterval); | 
 | 	} | 
 | 	subs->phase = 0; | 
 |  | 
 | 	if (subs->fill_max) | 
 | 		subs->curpacksize = subs->maxpacksize; | 
 | 	else | 
 | 		subs->curpacksize = maxsize; | 
 |  | 
 | 	if (snd_usb_get_speed(subs->dev) != USB_SPEED_FULL) | 
 | 		packs_per_ms = 8 >> subs->datainterval; | 
 | 	else | 
 | 		packs_per_ms = 1; | 
 |  | 
 | 	if (is_playback) { | 
 | 		urb_packs = max(chip->nrpacks, 1); | 
 | 		urb_packs = min(urb_packs, (unsigned int)MAX_PACKS); | 
 | 	} else | 
 | 		urb_packs = 1; | 
 | 	urb_packs *= packs_per_ms; | 
 | 	if (subs->syncpipe) | 
 | 		urb_packs = min(urb_packs, 1U << subs->syncinterval); | 
 |  | 
 | 	/* decide how many packets to be used */ | 
 | 	if (is_playback) { | 
 | 		unsigned int minsize, maxpacks; | 
 | 		/* determine how small a packet can be */ | 
 | 		minsize = (subs->freqn >> (16 - subs->datainterval)) | 
 | 			  * (frame_bits >> 3); | 
 | 		/* with sync from device, assume it can be 12% lower */ | 
 | 		if (subs->syncpipe) | 
 | 			minsize -= minsize >> 3; | 
 | 		minsize = max(minsize, 1u); | 
 | 		total_packs = (period_bytes + minsize - 1) / minsize; | 
 | 		/* we need at least two URBs for queueing */ | 
 | 		if (total_packs < 2) { | 
 | 			total_packs = 2; | 
 | 		} else { | 
 | 			/* and we don't want too long a queue either */ | 
 | 			maxpacks = max(MAX_QUEUE * packs_per_ms, urb_packs * 2); | 
 | 			total_packs = min(total_packs, maxpacks); | 
 | 		} | 
 | 	} else { | 
 | 		while (urb_packs > 1 && urb_packs * maxsize >= period_bytes) | 
 | 			urb_packs >>= 1; | 
 | 		total_packs = MAX_URBS * urb_packs; | 
 | 	} | 
 | 	subs->nurbs = (total_packs + urb_packs - 1) / urb_packs; | 
 | 	if (subs->nurbs > MAX_URBS) { | 
 | 		/* too much... */ | 
 | 		subs->nurbs = MAX_URBS; | 
 | 		total_packs = MAX_URBS * urb_packs; | 
 | 	} else if (subs->nurbs < 2) { | 
 | 		/* too little - we need at least two packets | 
 | 		 * to ensure contiguous playback/capture | 
 | 		 */ | 
 | 		subs->nurbs = 2; | 
 | 	} | 
 |  | 
 | 	/* allocate and initialize data urbs */ | 
 | 	for (i = 0; i < subs->nurbs; i++) { | 
 | 		struct snd_urb_ctx *u = &subs->dataurb[i]; | 
 | 		u->index = i; | 
 | 		u->subs = subs; | 
 | 		u->packets = (i + 1) * total_packs / subs->nurbs | 
 | 			- i * total_packs / subs->nurbs; | 
 | 		u->buffer_size = maxsize * u->packets; | 
 | 		if (subs->fmt_type == UAC_FORMAT_TYPE_II) | 
 | 			u->packets++; /* for transfer delimiter */ | 
 | 		u->urb = usb_alloc_urb(u->packets, GFP_KERNEL); | 
 | 		if (!u->urb) | 
 | 			goto out_of_memory; | 
 | 		u->urb->transfer_buffer = | 
 | 			usb_alloc_coherent(subs->dev, u->buffer_size, | 
 | 					   GFP_KERNEL, &u->urb->transfer_dma); | 
 | 		if (!u->urb->transfer_buffer) | 
 | 			goto out_of_memory; | 
 | 		u->urb->pipe = subs->datapipe; | 
 | 		u->urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP; | 
 | 		u->urb->interval = 1 << subs->datainterval; | 
 | 		u->urb->context = u; | 
 | 		u->urb->complete = snd_complete_urb; | 
 | 	} | 
 |  | 
 | 	if (subs->syncpipe) { | 
 | 		/* allocate and initialize sync urbs */ | 
 | 		subs->syncbuf = usb_alloc_coherent(subs->dev, SYNC_URBS * 4, | 
 | 						 GFP_KERNEL, &subs->sync_dma); | 
 | 		if (!subs->syncbuf) | 
 | 			goto out_of_memory; | 
 | 		for (i = 0; i < SYNC_URBS; i++) { | 
 | 			struct snd_urb_ctx *u = &subs->syncurb[i]; | 
 | 			u->index = i; | 
 | 			u->subs = subs; | 
 | 			u->packets = 1; | 
 | 			u->urb = usb_alloc_urb(1, GFP_KERNEL); | 
 | 			if (!u->urb) | 
 | 				goto out_of_memory; | 
 | 			u->urb->transfer_buffer = subs->syncbuf + i * 4; | 
 | 			u->urb->transfer_dma = subs->sync_dma + i * 4; | 
 | 			u->urb->transfer_buffer_length = 4; | 
 | 			u->urb->pipe = subs->syncpipe; | 
 | 			u->urb->transfer_flags = URB_ISO_ASAP | | 
 | 						 URB_NO_TRANSFER_DMA_MAP; | 
 | 			u->urb->number_of_packets = 1; | 
 | 			u->urb->interval = 1 << subs->syncinterval; | 
 | 			u->urb->context = u; | 
 | 			u->urb->complete = snd_complete_sync_urb; | 
 | 		} | 
 | 	} | 
 | 	return 0; | 
 |  | 
 | out_of_memory: | 
 | 	snd_usb_release_substream_urbs(subs, 0); | 
 | 	return -ENOMEM; | 
 | } | 
 |  | 
 | /* | 
 |  * prepare urb for full speed capture sync pipe | 
 |  * | 
 |  * fill the length and offset of each urb descriptor. | 
 |  * the fixed 10.14 frequency is passed through the pipe. | 
 |  */ | 
 | static int prepare_capture_sync_urb(struct snd_usb_substream *subs, | 
 | 				    struct snd_pcm_runtime *runtime, | 
 | 				    struct urb *urb) | 
 | { | 
 | 	unsigned char *cp = urb->transfer_buffer; | 
 | 	struct snd_urb_ctx *ctx = urb->context; | 
 |  | 
 | 	urb->dev = ctx->subs->dev; /* we need to set this at each time */ | 
 | 	urb->iso_frame_desc[0].length = 3; | 
 | 	urb->iso_frame_desc[0].offset = 0; | 
 | 	cp[0] = subs->freqn >> 2; | 
 | 	cp[1] = subs->freqn >> 10; | 
 | 	cp[2] = subs->freqn >> 18; | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * prepare urb for high speed capture sync pipe | 
 |  * | 
 |  * fill the length and offset of each urb descriptor. | 
 |  * the fixed 12.13 frequency is passed as 16.16 through the pipe. | 
 |  */ | 
 | static int prepare_capture_sync_urb_hs(struct snd_usb_substream *subs, | 
 | 				       struct snd_pcm_runtime *runtime, | 
 | 				       struct urb *urb) | 
 | { | 
 | 	unsigned char *cp = urb->transfer_buffer; | 
 | 	struct snd_urb_ctx *ctx = urb->context; | 
 |  | 
 | 	urb->dev = ctx->subs->dev; /* we need to set this at each time */ | 
 | 	urb->iso_frame_desc[0].length = 4; | 
 | 	urb->iso_frame_desc[0].offset = 0; | 
 | 	cp[0] = subs->freqn; | 
 | 	cp[1] = subs->freqn >> 8; | 
 | 	cp[2] = subs->freqn >> 16; | 
 | 	cp[3] = subs->freqn >> 24; | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * process after capture sync complete | 
 |  * - nothing to do | 
 |  */ | 
 | static int retire_capture_sync_urb(struct snd_usb_substream *subs, | 
 | 				   struct snd_pcm_runtime *runtime, | 
 | 				   struct urb *urb) | 
 | { | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * prepare urb for capture data pipe | 
 |  * | 
 |  * fill the offset and length of each descriptor. | 
 |  * | 
 |  * we use a temporary buffer to write the captured data. | 
 |  * since the length of written data is determined by host, we cannot | 
 |  * write onto the pcm buffer directly...  the data is thus copied | 
 |  * later at complete callback to the global buffer. | 
 |  */ | 
 | static int prepare_capture_urb(struct snd_usb_substream *subs, | 
 | 			       struct snd_pcm_runtime *runtime, | 
 | 			       struct urb *urb) | 
 | { | 
 | 	int i, offs; | 
 | 	struct snd_urb_ctx *ctx = urb->context; | 
 |  | 
 | 	offs = 0; | 
 | 	urb->dev = ctx->subs->dev; /* we need to set this at each time */ | 
 | 	for (i = 0; i < ctx->packets; i++) { | 
 | 		urb->iso_frame_desc[i].offset = offs; | 
 | 		urb->iso_frame_desc[i].length = subs->curpacksize; | 
 | 		offs += subs->curpacksize; | 
 | 	} | 
 | 	urb->transfer_buffer_length = offs; | 
 | 	urb->number_of_packets = ctx->packets; | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * process after capture complete | 
 |  * | 
 |  * copy the data from each desctiptor to the pcm buffer, and | 
 |  * update the current position. | 
 |  */ | 
 | static int retire_capture_urb(struct snd_usb_substream *subs, | 
 | 			      struct snd_pcm_runtime *runtime, | 
 | 			      struct urb *urb) | 
 | { | 
 | 	unsigned long flags; | 
 | 	unsigned char *cp; | 
 | 	int i; | 
 | 	unsigned int stride, frames, bytes, oldptr; | 
 | 	int period_elapsed = 0; | 
 |  | 
 | 	stride = runtime->frame_bits >> 3; | 
 |  | 
 | 	for (i = 0; i < urb->number_of_packets; i++) { | 
 | 		cp = (unsigned char *)urb->transfer_buffer + urb->iso_frame_desc[i].offset + subs->pkt_offset_adj; | 
 | 		if (urb->iso_frame_desc[i].status && printk_ratelimit()) { | 
 | 			snd_printdd("frame %d active: %d\n", i, urb->iso_frame_desc[i].status); | 
 | 			// continue; | 
 | 		} | 
 | 		bytes = urb->iso_frame_desc[i].actual_length; | 
 | 		frames = bytes / stride; | 
 | 		if (!subs->txfr_quirk) | 
 | 			bytes = frames * stride; | 
 | 		if (bytes % (runtime->sample_bits >> 3) != 0) { | 
 | #ifdef CONFIG_SND_DEBUG_VERBOSE | 
 | 			int oldbytes = bytes; | 
 | #endif | 
 | 			bytes = frames * stride; | 
 | 			snd_printdd(KERN_ERR "Corrected urb data len. %d->%d\n", | 
 | 							oldbytes, bytes); | 
 | 		} | 
 | 		/* update the current pointer */ | 
 | 		spin_lock_irqsave(&subs->lock, flags); | 
 | 		oldptr = subs->hwptr_done; | 
 | 		subs->hwptr_done += bytes; | 
 | 		if (subs->hwptr_done >= runtime->buffer_size * stride) | 
 | 			subs->hwptr_done -= runtime->buffer_size * stride; | 
 | 		frames = (bytes + (oldptr % stride)) / stride; | 
 | 		subs->transfer_done += frames; | 
 | 		if (subs->transfer_done >= runtime->period_size) { | 
 | 			subs->transfer_done -= runtime->period_size; | 
 | 			period_elapsed = 1; | 
 | 		} | 
 | 		spin_unlock_irqrestore(&subs->lock, flags); | 
 | 		/* copy a data chunk */ | 
 | 		if (oldptr + bytes > runtime->buffer_size * stride) { | 
 | 			unsigned int bytes1 = | 
 | 					runtime->buffer_size * stride - oldptr; | 
 | 			memcpy(runtime->dma_area + oldptr, cp, bytes1); | 
 | 			memcpy(runtime->dma_area, cp + bytes1, bytes - bytes1); | 
 | 		} else { | 
 | 			memcpy(runtime->dma_area + oldptr, cp, bytes); | 
 | 		} | 
 | 	} | 
 | 	if (period_elapsed) | 
 | 		snd_pcm_period_elapsed(subs->pcm_substream); | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * Process after capture complete when paused.  Nothing to do. | 
 |  */ | 
 | static int retire_paused_capture_urb(struct snd_usb_substream *subs, | 
 | 				     struct snd_pcm_runtime *runtime, | 
 | 				     struct urb *urb) | 
 | { | 
 | 	return 0; | 
 | } | 
 |  | 
 |  | 
 | /* | 
 |  * prepare urb for playback sync pipe | 
 |  * | 
 |  * set up the offset and length to receive the current frequency. | 
 |  */ | 
 | static int prepare_playback_sync_urb(struct snd_usb_substream *subs, | 
 | 				     struct snd_pcm_runtime *runtime, | 
 | 				     struct urb *urb) | 
 | { | 
 | 	struct snd_urb_ctx *ctx = urb->context; | 
 |  | 
 | 	urb->dev = ctx->subs->dev; /* we need to set this at each time */ | 
 | 	urb->iso_frame_desc[0].length = min(4u, ctx->subs->syncmaxsize); | 
 | 	urb->iso_frame_desc[0].offset = 0; | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * process after playback sync complete | 
 |  * | 
 |  * Full speed devices report feedback values in 10.14 format as samples per | 
 |  * frame, high speed devices in 16.16 format as samples per microframe. | 
 |  * Because the Audio Class 1 spec was written before USB 2.0, many high speed | 
 |  * devices use a wrong interpretation, some others use an entirely different | 
 |  * format.  Therefore, we cannot predict what format any particular device uses | 
 |  * and must detect it automatically. | 
 |  */ | 
 | static int retire_playback_sync_urb(struct snd_usb_substream *subs, | 
 | 				    struct snd_pcm_runtime *runtime, | 
 | 				    struct urb *urb) | 
 | { | 
 | 	unsigned int f; | 
 | 	int shift; | 
 | 	unsigned long flags; | 
 |  | 
 | 	if (urb->iso_frame_desc[0].status != 0 || | 
 | 	    urb->iso_frame_desc[0].actual_length < 3) | 
 | 		return 0; | 
 |  | 
 | 	f = le32_to_cpup(urb->transfer_buffer); | 
 | 	if (urb->iso_frame_desc[0].actual_length == 3) | 
 | 		f &= 0x00ffffff; | 
 | 	else | 
 | 		f &= 0x0fffffff; | 
 | 	if (f == 0) | 
 | 		return 0; | 
 |  | 
 | 	if (unlikely(subs->freqshift == INT_MIN)) { | 
 | 		/* | 
 | 		 * The first time we see a feedback value, determine its format | 
 | 		 * by shifting it left or right until it matches the nominal | 
 | 		 * frequency value.  This assumes that the feedback does not | 
 | 		 * differ from the nominal value more than +50% or -25%. | 
 | 		 */ | 
 | 		shift = 0; | 
 | 		while (f < subs->freqn - subs->freqn / 4) { | 
 | 			f <<= 1; | 
 | 			shift++; | 
 | 		} | 
 | 		while (f > subs->freqn + subs->freqn / 2) { | 
 | 			f >>= 1; | 
 | 			shift--; | 
 | 		} | 
 | 		subs->freqshift = shift; | 
 | 	} | 
 | 	else if (subs->freqshift >= 0) | 
 | 		f <<= subs->freqshift; | 
 | 	else | 
 | 		f >>= -subs->freqshift; | 
 |  | 
 | 	if (likely(f >= subs->freqn - subs->freqn / 8 && f <= subs->freqmax)) { | 
 | 		/* | 
 | 		 * If the frequency looks valid, set it. | 
 | 		 * This value is referred to in prepare_playback_urb(). | 
 | 		 */ | 
 | 		spin_lock_irqsave(&subs->lock, flags); | 
 | 		subs->freqm = f; | 
 | 		spin_unlock_irqrestore(&subs->lock, flags); | 
 | 	} else { | 
 | 		/* | 
 | 		 * Out of range; maybe the shift value is wrong. | 
 | 		 * Reset it so that we autodetect again the next time. | 
 | 		 */ | 
 | 		subs->freqshift = INT_MIN; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* determine the number of frames in the next packet */ | 
 | static int snd_usb_audio_next_packet_size(struct snd_usb_substream *subs) | 
 | { | 
 | 	if (subs->fill_max) | 
 | 		return subs->maxframesize; | 
 | 	else { | 
 | 		subs->phase = (subs->phase & 0xffff) | 
 | 			+ (subs->freqm << subs->datainterval); | 
 | 		return min(subs->phase >> 16, subs->maxframesize); | 
 | 	} | 
 | } | 
 |  | 
 | /* | 
 |  * Prepare urb for streaming before playback starts or when paused. | 
 |  * | 
 |  * We don't have any data, so we send silence. | 
 |  */ | 
 | static int prepare_nodata_playback_urb(struct snd_usb_substream *subs, | 
 | 				       struct snd_pcm_runtime *runtime, | 
 | 				       struct urb *urb) | 
 | { | 
 | 	unsigned int i, offs, counts; | 
 | 	struct snd_urb_ctx *ctx = urb->context; | 
 | 	int stride = runtime->frame_bits >> 3; | 
 |  | 
 | 	offs = 0; | 
 | 	urb->dev = ctx->subs->dev; | 
 | 	for (i = 0; i < ctx->packets; ++i) { | 
 | 		counts = snd_usb_audio_next_packet_size(subs); | 
 | 		urb->iso_frame_desc[i].offset = offs * stride; | 
 | 		urb->iso_frame_desc[i].length = counts * stride; | 
 | 		offs += counts; | 
 | 	} | 
 | 	urb->number_of_packets = ctx->packets; | 
 | 	urb->transfer_buffer_length = offs * stride; | 
 | 	memset(urb->transfer_buffer, | 
 | 	       runtime->format == SNDRV_PCM_FORMAT_U8 ? 0x80 : 0, | 
 | 	       offs * stride); | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * prepare urb for playback data pipe | 
 |  * | 
 |  * Since a URB can handle only a single linear buffer, we must use double | 
 |  * buffering when the data to be transferred overflows the buffer boundary. | 
 |  * To avoid inconsistencies when updating hwptr_done, we use double buffering | 
 |  * for all URBs. | 
 |  */ | 
 | static int prepare_playback_urb(struct snd_usb_substream *subs, | 
 | 				struct snd_pcm_runtime *runtime, | 
 | 				struct urb *urb) | 
 | { | 
 | 	int i, stride; | 
 | 	unsigned int counts, frames, bytes; | 
 | 	unsigned long flags; | 
 | 	int period_elapsed = 0; | 
 | 	struct snd_urb_ctx *ctx = urb->context; | 
 |  | 
 | 	stride = runtime->frame_bits >> 3; | 
 |  | 
 | 	frames = 0; | 
 | 	urb->dev = ctx->subs->dev; /* we need to set this at each time */ | 
 | 	urb->number_of_packets = 0; | 
 | 	spin_lock_irqsave(&subs->lock, flags); | 
 | 	for (i = 0; i < ctx->packets; i++) { | 
 | 		counts = snd_usb_audio_next_packet_size(subs); | 
 | 		/* set up descriptor */ | 
 | 		urb->iso_frame_desc[i].offset = frames * stride; | 
 | 		urb->iso_frame_desc[i].length = counts * stride; | 
 | 		frames += counts; | 
 | 		urb->number_of_packets++; | 
 | 		subs->transfer_done += counts; | 
 | 		if (subs->transfer_done >= runtime->period_size) { | 
 | 			subs->transfer_done -= runtime->period_size; | 
 | 			period_elapsed = 1; | 
 | 			if (subs->fmt_type == UAC_FORMAT_TYPE_II) { | 
 | 				if (subs->transfer_done > 0) { | 
 | 					/* FIXME: fill-max mode is not | 
 | 					 * supported yet */ | 
 | 					frames -= subs->transfer_done; | 
 | 					counts -= subs->transfer_done; | 
 | 					urb->iso_frame_desc[i].length = | 
 | 						counts * stride; | 
 | 					subs->transfer_done = 0; | 
 | 				} | 
 | 				i++; | 
 | 				if (i < ctx->packets) { | 
 | 					/* add a transfer delimiter */ | 
 | 					urb->iso_frame_desc[i].offset = | 
 | 						frames * stride; | 
 | 					urb->iso_frame_desc[i].length = 0; | 
 | 					urb->number_of_packets++; | 
 | 				} | 
 | 				break; | 
 | 			} | 
 | 		} | 
 | 		if (period_elapsed) /* finish at the period boundary */ | 
 | 			break; | 
 | 	} | 
 | 	bytes = frames * stride; | 
 | 	if (subs->hwptr_done + bytes > runtime->buffer_size * stride) { | 
 | 		/* err, the transferred area goes over buffer boundary. */ | 
 | 		unsigned int bytes1 = | 
 | 			runtime->buffer_size * stride - subs->hwptr_done; | 
 | 		memcpy(urb->transfer_buffer, | 
 | 		       runtime->dma_area + subs->hwptr_done, bytes1); | 
 | 		memcpy(urb->transfer_buffer + bytes1, | 
 | 		       runtime->dma_area, bytes - bytes1); | 
 | 	} else { | 
 | 		memcpy(urb->transfer_buffer, | 
 | 		       runtime->dma_area + subs->hwptr_done, bytes); | 
 | 	} | 
 | 	subs->hwptr_done += bytes; | 
 | 	if (subs->hwptr_done >= runtime->buffer_size * stride) | 
 | 		subs->hwptr_done -= runtime->buffer_size * stride; | 
 |  | 
 | 	/* update delay with exact number of samples queued */ | 
 | 	runtime->delay = subs->last_delay; | 
 | 	runtime->delay += frames; | 
 | 	subs->last_delay = runtime->delay; | 
 |  | 
 | 	/* realign last_frame_number */ | 
 | 	subs->last_frame_number = usb_get_current_frame_number(subs->dev); | 
 | 	subs->last_frame_number &= 0xFF; /* keep 8 LSBs */ | 
 |  | 
 | 	spin_unlock_irqrestore(&subs->lock, flags); | 
 | 	urb->transfer_buffer_length = bytes; | 
 | 	if (period_elapsed) | 
 | 		snd_pcm_period_elapsed(subs->pcm_substream); | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * process after playback data complete | 
 |  * - decrease the delay count again | 
 |  */ | 
 | static int retire_playback_urb(struct snd_usb_substream *subs, | 
 | 			       struct snd_pcm_runtime *runtime, | 
 | 			       struct urb *urb) | 
 | { | 
 | 	unsigned long flags; | 
 | 	int stride = runtime->frame_bits >> 3; | 
 | 	int processed = urb->transfer_buffer_length / stride; | 
 | 	int est_delay; | 
 |  | 
 | 	spin_lock_irqsave(&subs->lock, flags); | 
 |  | 
 | 	est_delay = snd_usb_pcm_delay(subs, runtime->rate); | 
 | 	/* update delay with exact number of samples played */ | 
 | 	if (processed > subs->last_delay) | 
 | 		subs->last_delay = 0; | 
 | 	else | 
 | 		subs->last_delay -= processed; | 
 | 	runtime->delay = subs->last_delay; | 
 |  | 
 | 	/* | 
 | 	 * Report when delay estimate is off by more than 2ms. | 
 | 	 * The error should be lower than 2ms since the estimate relies | 
 | 	 * on two reads of a counter updated every ms. | 
 | 	 */ | 
 | 	if (abs(est_delay - subs->last_delay) * 1000 > runtime->rate * 2) | 
 | 		snd_printk(KERN_DEBUG "delay: estimated %d, actual %d\n", | 
 | 			est_delay, subs->last_delay); | 
 |  | 
 | 	spin_unlock_irqrestore(&subs->lock, flags); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const char *usb_error_string(int err) | 
 | { | 
 | 	switch (err) { | 
 | 	case -ENODEV: | 
 | 		return "no device"; | 
 | 	case -ENOENT: | 
 | 		return "endpoint not enabled"; | 
 | 	case -EPIPE: | 
 | 		return "endpoint stalled"; | 
 | 	case -ENOSPC: | 
 | 		return "not enough bandwidth"; | 
 | 	case -ESHUTDOWN: | 
 | 		return "device disabled"; | 
 | 	case -EHOSTUNREACH: | 
 | 		return "device suspended"; | 
 | 	case -EINVAL: | 
 | 	case -EAGAIN: | 
 | 	case -EFBIG: | 
 | 	case -EMSGSIZE: | 
 | 		return "internal error"; | 
 | 	default: | 
 | 		return "unknown error"; | 
 | 	} | 
 | } | 
 |  | 
 | /* | 
 |  * set up and start data/sync urbs | 
 |  */ | 
 | static int start_urbs(struct snd_usb_substream *subs, struct snd_pcm_runtime *runtime) | 
 | { | 
 | 	unsigned int i; | 
 | 	int err; | 
 |  | 
 | 	if (subs->stream->chip->shutdown) | 
 | 		return -EBADFD; | 
 |  | 
 | 	for (i = 0; i < subs->nurbs; i++) { | 
 | 		if (snd_BUG_ON(!subs->dataurb[i].urb)) | 
 | 			return -EINVAL; | 
 | 		if (subs->ops.prepare(subs, runtime, subs->dataurb[i].urb) < 0) { | 
 | 			snd_printk(KERN_ERR "cannot prepare datapipe for urb %d\n", i); | 
 | 			goto __error; | 
 | 		} | 
 | 	} | 
 | 	if (subs->syncpipe) { | 
 | 		for (i = 0; i < SYNC_URBS; i++) { | 
 | 			if (snd_BUG_ON(!subs->syncurb[i].urb)) | 
 | 				return -EINVAL; | 
 | 			if (subs->ops.prepare_sync(subs, runtime, subs->syncurb[i].urb) < 0) { | 
 | 				snd_printk(KERN_ERR "cannot prepare syncpipe for urb %d\n", i); | 
 | 				goto __error; | 
 | 			} | 
 | 		} | 
 | 	} | 
 |  | 
 | 	subs->active_mask = 0; | 
 | 	subs->unlink_mask = 0; | 
 | 	subs->running = 1; | 
 | 	for (i = 0; i < subs->nurbs; i++) { | 
 | 		err = usb_submit_urb(subs->dataurb[i].urb, GFP_ATOMIC); | 
 | 		if (err < 0) { | 
 | 			snd_printk(KERN_ERR "cannot submit datapipe " | 
 | 				   "for urb %d, error %d: %s\n", | 
 | 				   i, err, usb_error_string(err)); | 
 | 			goto __error; | 
 | 		} | 
 | 		set_bit(i, &subs->active_mask); | 
 | 	} | 
 | 	if (subs->syncpipe) { | 
 | 		for (i = 0; i < SYNC_URBS; i++) { | 
 | 			err = usb_submit_urb(subs->syncurb[i].urb, GFP_ATOMIC); | 
 | 			if (err < 0) { | 
 | 				snd_printk(KERN_ERR "cannot submit syncpipe " | 
 | 					   "for urb %d, error %d: %s\n", | 
 | 					   i, err, usb_error_string(err)); | 
 | 				goto __error; | 
 | 			} | 
 | 			set_bit(i + 16, &subs->active_mask); | 
 | 		} | 
 | 	} | 
 | 	return 0; | 
 |  | 
 |  __error: | 
 | 	// snd_pcm_stop(subs->pcm_substream, SNDRV_PCM_STATE_XRUN); | 
 | 	deactivate_urbs(subs, 0, 0); | 
 | 	return -EPIPE; | 
 | } | 
 |  | 
 |  | 
 | /* | 
 |  */ | 
 | static struct snd_urb_ops audio_urb_ops[2] = { | 
 | 	{ | 
 | 		.prepare =	prepare_nodata_playback_urb, | 
 | 		.retire =	retire_playback_urb, | 
 | 		.prepare_sync =	prepare_playback_sync_urb, | 
 | 		.retire_sync =	retire_playback_sync_urb, | 
 | 	}, | 
 | 	{ | 
 | 		.prepare =	prepare_capture_urb, | 
 | 		.retire =	retire_capture_urb, | 
 | 		.prepare_sync =	prepare_capture_sync_urb, | 
 | 		.retire_sync =	retire_capture_sync_urb, | 
 | 	}, | 
 | }; | 
 |  | 
 | /* | 
 |  * initialize the substream instance. | 
 |  */ | 
 |  | 
 | void snd_usb_init_substream(struct snd_usb_stream *as, | 
 | 			    int stream, struct audioformat *fp) | 
 | { | 
 | 	struct snd_usb_substream *subs = &as->substream[stream]; | 
 |  | 
 | 	INIT_LIST_HEAD(&subs->fmt_list); | 
 | 	spin_lock_init(&subs->lock); | 
 |  | 
 | 	subs->stream = as; | 
 | 	subs->direction = stream; | 
 | 	subs->dev = as->chip->dev; | 
 | 	subs->txfr_quirk = as->chip->txfr_quirk; | 
 | 	subs->ops = audio_urb_ops[stream]; | 
 | 	subs->speed = snd_usb_get_speed(subs->dev); | 
 | 	if (subs->speed >= USB_SPEED_HIGH) | 
 | 		subs->ops.prepare_sync = prepare_capture_sync_urb_hs; | 
 | 	subs->pkt_offset_adj = 0; | 
 |  | 
 | 	snd_usb_set_pcm_ops(as->pcm, stream); | 
 |  | 
 | 	list_add_tail(&fp->list, &subs->fmt_list); | 
 | 	subs->formats |= fp->formats; | 
 | 	subs->endpoint = fp->endpoint; | 
 | 	subs->num_formats++; | 
 | 	subs->fmt_type = fp->fmt_type; | 
 | } | 
 |  | 
 | int snd_usb_substream_playback_trigger(struct snd_pcm_substream *substream, int cmd) | 
 | { | 
 | 	struct snd_usb_substream *subs = substream->runtime->private_data; | 
 |  | 
 | 	switch (cmd) { | 
 | 	case SNDRV_PCM_TRIGGER_START: | 
 | 	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: | 
 | 		subs->ops.prepare = prepare_playback_urb; | 
 | 		return 0; | 
 | 	case SNDRV_PCM_TRIGGER_STOP: | 
 | 		return deactivate_urbs(subs, 0, 0); | 
 | 	case SNDRV_PCM_TRIGGER_PAUSE_PUSH: | 
 | 		subs->ops.prepare = prepare_nodata_playback_urb; | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	return -EINVAL; | 
 | } | 
 |  | 
 | int snd_usb_substream_capture_trigger(struct snd_pcm_substream *substream, int cmd) | 
 | { | 
 | 	struct snd_usb_substream *subs = substream->runtime->private_data; | 
 |  | 
 | 	switch (cmd) { | 
 | 	case SNDRV_PCM_TRIGGER_START: | 
 | 		subs->ops.retire = retire_capture_urb; | 
 | 		return start_urbs(subs, substream->runtime); | 
 | 	case SNDRV_PCM_TRIGGER_STOP: | 
 | 		return deactivate_urbs(subs, 0, 0); | 
 | 	case SNDRV_PCM_TRIGGER_PAUSE_PUSH: | 
 | 		subs->ops.retire = retire_paused_capture_urb; | 
 | 		return 0; | 
 | 	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: | 
 | 		subs->ops.retire = retire_capture_urb; | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	return -EINVAL; | 
 | } | 
 |  | 
 | int snd_usb_substream_prepare(struct snd_usb_substream *subs, | 
 | 			      struct snd_pcm_runtime *runtime) | 
 | { | 
 | 	/* clear urbs (to be sure) */ | 
 | 	deactivate_urbs(subs, 0, 1); | 
 | 	wait_clear_urbs(subs); | 
 |  | 
 | 	/* for playback, submit the URBs now; otherwise, the first hwptr_done | 
 | 	 * updates for all URBs would happen at the same time when starting */ | 
 | 	if (subs->direction == SNDRV_PCM_STREAM_PLAYBACK) { | 
 | 		subs->ops.prepare = prepare_nodata_playback_urb; | 
 | 		return start_urbs(subs, runtime); | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  |