[Feature][ZXW-33]merge ZXW 0428 version
Change-Id: I11f167edfea428d9fab198ff00ff1364932d1b0b
diff --git a/ap/libc/glibc/glibc-2.23/bits/termios.h b/ap/libc/glibc/glibc-2.23/bits/termios.h
new file mode 100644
index 0000000..f28b492
--- /dev/null
+++ b/ap/libc/glibc/glibc-2.23/bits/termios.h
@@ -0,0 +1,343 @@
+/* termios type and macro definitions. 4.4 BSD/generic GNU version.
+ Copyright (C) 1993-2016 Free Software Foundation, Inc.
+ This file is part of the GNU C Library.
+
+ The GNU C Library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ The GNU C Library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with the GNU C Library; if not, see
+ <http://www.gnu.org/licenses/>. */
+
+#ifndef _TERMIOS_H
+# error "Never include <bits/termios.h> directly; use <termios.h> instead."
+#endif
+
+/* These macros are also defined in some <bits/ioctls.h> files (with
+ numerically identical values), but this serves to shut up cpp's
+ complaining. */
+#if defined __USE_MISC || defined __USE_XOPEN
+
+# ifdef NL0
+# undef NL0
+# endif
+# ifdef NL1
+# undef NL1
+# endif
+# ifdef TAB0
+# undef TAB0
+# endif
+# ifdef TAB1
+# undef TAB1
+# endif
+# ifdef TAB2
+# undef TAB2
+# endif
+# ifdef CR0
+# undef CR0
+# endif
+# ifdef CR1
+# undef CR1
+# endif
+# ifdef CR2
+# undef CR2
+# endif
+# ifdef CR3
+# undef CR3
+# endif
+# ifdef FF0
+# undef FF0
+# endif
+# ifdef FF1
+# undef FF1
+# endif
+# ifdef BS0
+# undef BS0
+# endif
+# ifdef BS1
+# undef BS1
+# endif
+
+#endif /* __USE_MISC || __USE_XOPEN */
+
+#ifdef __USE_MISC
+
+# ifdef MDMBUF
+# undef MDMBUF
+# endif
+# ifdef FLUSHO
+# undef FLUSHO
+# endif
+# ifdef PENDIN
+# undef PENDIN
+# endif
+
+#endif /* __USE_MISC */
+
+#ifdef ECHO
+# undef ECHO
+#endif
+#ifdef TOSTOP
+# undef TOSTOP
+#endif
+#ifdef NOFLSH
+# undef NOFLSH
+#endif
+
+
+/* These definitions match those used by the 4.4 BSD kernel.
+ If the operating system has termios system calls or ioctls that
+ correctly implement the POSIX.1 behavior, there should be a
+ system-dependent version of this file that defines `struct termios',
+ `tcflag_t', `cc_t', `speed_t' and the `TC*' constants appropriately. */
+
+/* Type of terminal control flag masks. */
+typedef unsigned long int tcflag_t;
+
+/* Type of control characters. */
+typedef unsigned char cc_t;
+
+/* Type of baud rate specifiers. */
+typedef long int speed_t;
+
+/* Terminal control structure. */
+struct termios
+{
+ /* Input modes. */
+ tcflag_t c_iflag;
+#define IGNBRK (1 << 0) /* Ignore break condition. */
+#define BRKINT (1 << 1) /* Signal interrupt on break. */
+#define IGNPAR (1 << 2) /* Ignore characters with parity errors. */
+#define PARMRK (1 << 3) /* Mark parity and framing errors. */
+#define INPCK (1 << 4) /* Enable input parity check. */
+#define ISTRIP (1 << 5) /* Strip 8th bit off characters. */
+#define INLCR (1 << 6) /* Map NL to CR on input. */
+#define IGNCR (1 << 7) /* Ignore CR. */
+#define ICRNL (1 << 8) /* Map CR to NL on input. */
+#define IXON (1 << 9) /* Enable start/stop output control. */
+#define IXOFF (1 << 10) /* Enable start/stop input control. */
+#if defined __USE_MISC || defined __USE_UNIX98
+# define IXANY (1 << 11) /* Any character will restart after stop. */
+#endif
+#ifdef __USE_MISC
+# define IMAXBEL (1 << 13) /* Ring bell when input queue is full. */
+#endif
+#ifdef __USE_GNU
+# define IUCLC (1 << 14) /* Translate upper case input to lower case. */
+#endif
+
+ /* Output modes. */
+ tcflag_t c_oflag;
+#define OPOST (1 << 0) /* Perform output processing. */
+#if defined __USE_MISC || defined __USE_XOPEN
+# define ONLCR (1 << 1) /* Map NL to CR-NL on output. */
+#endif
+#ifdef __USE_MISC
+# define OXTABS TAB3 /* Expand tabs to spaces. */
+# define ONOEOT (1 << 3) /* Discard EOT (^D) on output. */
+#endif
+#if defined __USE_MISC || defined __USE_XOPEN
+# define OCRNL (1 << 4) /* Map CR to NL. */
+# define ONOCR (1 << 5) /* Discard CR's when on column 0. */
+# define ONLRET (1 << 6) /* Move to column 0 on NL. */
+#endif
+#if defined __USE_MISC || defined __USE_XOPEN
+# define NLDLY (3 << 8) /* NL delay. */
+# define NL0 (0 << 8) /* NL type 0. */
+# define NL1 (1 << 8) /* NL type 1. */
+# define TABDLY (3 << 10) /* TAB delay. */
+# define TAB0 (0 << 10) /* TAB delay type 0. */
+# define TAB1 (1 << 10) /* TAB delay type 1. */
+# define TAB2 (2 << 10) /* TAB delay type 2. */
+# define TAB3 (1 << 2) /* Expand tabs to spaces. */
+# define CRDLY (3 << 12) /* CR delay. */
+# define CR0 (0 << 12) /* CR delay type 0. */
+# define CR1 (1 << 12) /* CR delay type 1. */
+# define CR2 (2 << 12) /* CR delay type 2. */
+# define CR3 (3 << 12) /* CR delay type 3. */
+# define FFDLY (1 << 14) /* FF delay. */
+# define FF0 (0 << 14) /* FF delay type 0. */
+# define FF1 (1 << 14) /* FF delay type 1. */
+# define BSDLY (1 << 15) /* BS delay. */
+# define BS0 (0 << 15) /* BS delay type 0. */
+# define BS1 (1 << 15) /* BS delay type 1. */
+# define VTDLY (1 << 16) /* VT delay. */
+# define VT0 (0 << 16) /* VT delay type 0. */
+# define VT1 (1 << 16) /* VT delay type 1. */
+#endif /* __USE_MISC || __USE_XOPEN */
+#ifdef __USE_GNU
+# define OLCUC (1 << 17) /* Translate lower case output to upper case */
+#endif
+#ifdef __USE_XOPEN
+# define OFILL (1 << 18) /* Send fill characters for delays. */
+#endif
+
+ /* Control modes. */
+ tcflag_t c_cflag;
+#ifdef __USE_MISC
+# define CIGNORE (1 << 0) /* Ignore these control flags. */
+#endif
+#define CSIZE (CS5|CS6|CS7|CS8) /* Number of bits per byte (mask). */
+#define CS5 0 /* 5 bits per byte. */
+#define CS6 (1 << 8) /* 6 bits per byte. */
+#define CS7 (1 << 9) /* 7 bits per byte. */
+#define CS8 (CS6|CS7) /* 8 bits per byte. */
+#define CSTOPB (1 << 10) /* Two stop bits instead of one. */
+#define CREAD (1 << 11) /* Enable receiver. */
+#define PARENB (1 << 12) /* Parity enable. */
+#define PARODD (1 << 13) /* Odd parity instead of even. */
+#define HUPCL (1 << 14) /* Hang up on last close. */
+#define CLOCAL (1 << 15) /* Ignore modem status lines. */
+#ifdef __USE_MISC
+# define CRTSCTS (1 << 16) /* RTS/CTS flow control. */
+# define CRTS_IFLOW CRTSCTS /* Compatibility. */
+# define CCTS_OFLOW CRTSCTS /* Compatibility. */
+# define CDTRCTS (1 << 17) /* DTR/CTS flow control. */
+# define MDMBUF (1 << 20) /* DTR/DCD flow control. */
+# define CHWFLOW (MDMBUF|CRTSCTS|CDTRCTS) /* All types of flow control. */
+#endif
+
+ /* Local modes. */
+ tcflag_t c_lflag;
+#ifdef __USE_MISC
+# define ECHOKE (1 << 0) /* Visual erase for KILL. */
+#endif
+#define _ECHOE (1 << 1) /* Visual erase for ERASE. */
+#define ECHOE _ECHOE
+#define _ECHOK (1 << 2) /* Echo NL after KILL. */
+#define ECHOK _ECHOK
+#define _ECHO (1 << 3) /* Enable echo. */
+#define ECHO _ECHO
+#define _ECHONL (1 << 4) /* Echo NL even if ECHO is off. */
+#define ECHONL _ECHONL
+#ifdef __USE_MISC
+# define ECHOPRT (1 << 5) /* Hardcopy visual erase. */
+# define ECHOCTL (1 << 6) /* Echo control characters as ^X. */
+#endif
+#define _ISIG (1 << 7) /* Enable signals. */
+#define ISIG _ISIG
+#define _ICANON (1 << 8) /* Do erase and kill processing. */
+#define ICANON _ICANON
+#ifdef __USE_MISC
+# define ALTWERASE (1 << 9) /* Alternate WERASE algorithm. */
+#endif
+#define _IEXTEN (1 << 10) /* Enable DISCARD and LNEXT. */
+#define IEXTEN _IEXTEN
+#ifdef __USE_MISC
+# define EXTPROC (1 << 11) /* External processing. */
+#endif
+#define _TOSTOP (1 << 22) /* Send SIGTTOU for background output. */
+#define TOSTOP _TOSTOP
+#ifdef __USE_MISC
+# define FLUSHO (1 << 23) /* Output being flushed (state). */
+# define NOKERNINFO (1 << 25) /* Disable VSTATUS. */
+# define PENDIN (1 << 29) /* Retype pending input (state). */
+#endif
+#define _NOFLSH (1 << 31) /* Disable flush after interrupt. */
+#define NOFLSH _NOFLSH
+
+ /* Control characters. */
+#define VEOF 0 /* End-of-file character [ICANON]. */
+#define VEOL 1 /* End-of-line character [ICANON]. */
+#ifdef __USE_MISC
+# define VEOL2 2 /* Second EOL character [ICANON]. */
+#endif
+#define VERASE 3 /* Erase character [ICANON]. */
+#ifdef __USE_MISC
+# define VWERASE 4 /* Word-erase character [ICANON]. */
+#endif
+#define VKILL 5 /* Kill-line character [ICANON]. */
+#ifdef __USE_MISC
+# define VREPRINT 6 /* Reprint-line character [ICANON]. */
+#endif
+#define VINTR 8 /* Interrupt character [ISIG]. */
+#define VQUIT 9 /* Quit character [ISIG]. */
+#define VSUSP 10 /* Suspend character [ISIG]. */
+#ifdef __USE_MISC
+# define VDSUSP 11 /* Delayed suspend character [ISIG]. */
+#endif
+#define VSTART 12 /* Start (X-ON) character [IXON, IXOFF]. */
+#define VSTOP 13 /* Stop (X-OFF) character [IXON, IXOFF]. */
+#ifdef __USE_MISC
+# define VLNEXT 14 /* Literal-next character [IEXTEN]. */
+# define VDISCARD 15 /* Discard character [IEXTEN]. */
+#endif
+#define VMIN 16 /* Minimum number of bytes read at once [!ICANON]. */
+#define VTIME 17 /* Time-out value (tenths of a second) [!ICANON]. */
+#ifdef __USE_MISC
+# define VSTATUS 18 /* Status character [ICANON]. */
+#endif
+#define NCCS 20 /* Value duplicated in <hurd/tioctl.defs>. */
+ cc_t c_cc[NCCS];
+
+ /* Input and output baud rates. */
+ speed_t __ispeed, __ospeed;
+#define B0 0 /* Hang up. */
+#define B50 50 /* 50 baud. */
+#define B75 75 /* 75 baud. */
+#define B110 110 /* 110 baud. */
+#define B134 134 /* 134.5 baud. */
+#define B150 150 /* 150 baud. */
+#define B200 200 /* 200 baud. */
+#define B300 300 /* 300 baud. */
+#define B600 600 /* 600 baud. */
+#define B1200 1200 /* 1200 baud. */
+#define B1800 1800 /* 1800 baud. */
+#define B2400 2400 /* 2400 baud. */
+#define B4800 4800 /* 4800 baud. */
+#define B9600 9600 /* 9600 baud. */
+#define B7200 7200 /* 7200 baud. */
+#define B14400 14400 /* 14400 baud. */
+#define B19200 19200 /* 19200 baud. */
+#define B28800 28800 /* 28800 baud. */
+#define B38400 38400 /* 38400 baud. */
+#ifdef __USE_MISC
+# define EXTA 19200
+# define EXTB 38400
+#endif
+#define B57600 57600
+#define B76800 76800
+#define B115200 115200
+#define B230400 230400
+#define B460800 460800
+#define B500000 500000
+#define B576000 576000
+#define B921600 921600
+#define B1000000 1000000
+#define B1152000 1152000
+#define B1500000 1500000
+#define B2000000 2000000
+#define B2500000 2500000
+#define B3000000 3000000
+#define B3500000 3500000
+#define B4000000 4000000
+};
+
+#define _IOT_termios /* Hurd ioctl type field. */ \
+ _IOT (_IOTS (tcflag_t), 4, _IOTS (cc_t), NCCS, _IOTS (speed_t), 2)
+
+/* Values for the OPTIONAL_ACTIONS argument to `tcsetattr'. */
+#define TCSANOW 0 /* Change immediately. */
+#define TCSADRAIN 1 /* Change when pending output is written. */
+#define TCSAFLUSH 2 /* Flush pending input before changing. */
+#ifdef __USE_MISC
+# define TCSASOFT 0x10 /* Flag: Don't alter hardware state. */
+#endif
+
+/* Values for the QUEUE_SELECTOR argument to `tcflush'. */
+#define TCIFLUSH 1 /* Discard data received but not yet read. */
+#define TCOFLUSH 2 /* Discard data written but not yet sent. */
+#define TCIOFLUSH 3 /* Discard all pending data. */
+
+/* Values for the ACTION argument to `tcflow'. */
+#define TCOOFF 1 /* Suspend output. */
+#define TCOON 2 /* Restart suspended output. */
+#define TCIOFF 3 /* Send a STOP character. */
+#define TCION 4 /* Send a START character. */