[Feature][ZXW-33]merge ZXW 0428 version
Change-Id: I11f167edfea428d9fab198ff00ff1364932d1b0b
diff --git a/ap/libc/glibc/glibc-2.23/iconvdata/run-iconv-test.sh b/ap/libc/glibc/glibc-2.23/iconvdata/run-iconv-test.sh
new file mode 100755
index 0000000..2e7105a
--- /dev/null
+++ b/ap/libc/glibc/glibc-2.23/iconvdata/run-iconv-test.sh
@@ -0,0 +1,208 @@
+#!/bin/sh -f
+# Run available iconv(1) tests.
+# Copyright (C) 1998-2016 Free Software Foundation, Inc.
+# This file is part of the GNU C Library.
+# Contributed by Ulrich Drepper <drepper@cygnus.com>, 1998.
+
+# The GNU C Library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+
+# The GNU C Library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+
+# You should have received a copy of the GNU Lesser General Public
+# License along with the GNU C Library; if not, see
+# <http://www.gnu.org/licenses/>.
+
+set -e
+
+codir=$1
+test_wrapper_env="$2"
+run_program_env="$3"
+
+# We use always the same temporary file.
+temp1=$codir/iconvdata/iconv-test.xxx
+temp2=$codir/iconvdata/iconv-test.yyy
+
+trap "rm -f $temp1 $temp2" 1 2 3 15
+
+# We have to have some directories in the library path.
+LIBPATH=$codir:$codir/iconvdata
+
+# How the start the iconv(1) program.
+ICONV='$codir/elf/ld.so --library-path $LIBPATH --inhibit-rpath ${from}.so \
+ $codir/iconv/iconv_prog'
+ICONV="$test_wrapper_env $run_program_env $ICONV"
+
+# Which echo?
+if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
+ ac_n=-n ac_c= ac_t=
+else
+ ac_n= ac_c='\c' ac_t=
+fi
+
+# We read the file named TESTS. All non-empty lines not starting with
+# `#' are interpreted as commands.
+failed=0
+while read from to subset targets; do
+ # Ignore empty and comment lines.
+ if test -z "$subset" || test "$from" = '#'; then continue; fi
+
+ # Expand the variables now.
+ PROG=`eval echo $ICONV`
+
+ if test -n "$targets"; then
+ for t in $targets; do
+ if test -f testdata/$from; then
+ echo $ac_n " test data: $from -> $t $ac_c"
+ $PROG -f $from -t $t testdata/$from < /dev/null > $temp1 ||
+ { if test $? -gt 128; then exit 1; fi
+ echo "FAILED"; failed=1; continue; }
+ echo $ac_n "OK$ac_c"
+ if test -s testdata/$from..$t; then
+ LC_ALL=C cmp $temp1 testdata/$from..$t > /dev/null 2>&1 ||
+ { echo "/FAILED"; failed=1; continue; }
+ echo $ac_n "/OK$ac_c"
+ fi
+ echo $ac_n " -> $from $ac_c"
+ $PROG -f $t -t $to -o $temp2 $temp1 < /dev/null ||
+ { if test $? -gt 128; then exit 1; fi
+ echo "FAILED"; failed=1; continue; }
+ echo $ac_n "OK$ac_c"
+ test -s $temp1 &&
+ LC_ALL=C cmp testdata/$from $temp2 > /dev/null 2>&1 ||
+ { echo "/FAILED"; failed=1; continue; }
+ echo "/OK"
+ rm -f $temp1 $temp2
+ fi
+
+ # Now test some bigger text, entirely in ASCII. If ASCII is no subset
+ # of the coded character set we convert the text to this coded character
+ # set. Otherwise we convert to all the TARGETS.
+ if test $subset = Y; then
+ echo $ac_n " suntzu: $from -> $t -> $to $ac_c"
+ $PROG -f $from -t $t testdata/suntzus < /dev/null |
+ $PROG -f $t -t $to > $temp1 ||
+ { if test $? -gt 128; then exit 1; fi
+ echo "FAILED"; failed=1; continue; }
+ echo $ac_n "OK$ac_c"
+ LC_ALL=C cmp testdata/suntzus $temp1 ||
+ { echo "/FAILED"; failed=1; continue; }
+ echo "/OK"
+ fi
+ rm -f $temp1
+
+ # And tests where iconv(1) has to handle charmaps.
+ if test "$t" = UTF8; then tc=UTF-8; else tc="$t"; fi
+ if test -f ../localedata/charmaps/$from &&
+ test -f ../localedata/charmaps/$tc &&
+ test -f testdata/$from &&
+ ! grep '<U....><U....>' ../localedata/charmaps/$from > /dev/null; then
+ echo $ac_n "test charmap: $from -> $t $ac_c"
+ $PROG -f ../localedata/charmaps/$from -t ../localedata/charmaps/$tc \
+ testdata/$from < /dev/null > $temp1 ||
+ { if test $? -gt 128; then exit 1; fi
+ echo "FAILED"; failed=1; continue; }
+ echo $ac_n "OK$ac_c"
+ if test -s testdata/$from..$t; then
+ LC_ALL=C cmp $temp1 testdata/$from..$t > /dev/null 2>&1 ||
+ { echo "/FAILED"; failed=1; continue; }
+ echo $ac_n "/OK$ac_c"
+ fi
+ echo $ac_n " -> $from $ac_c"
+ $PROG -t ../localedata/charmaps/$from -f ../localedata/charmaps/$tc \
+ -o $temp2 $temp1 < /dev/null ||
+ { if test $? -gt 128; then exit 1; fi
+ echo "FAILED"; failed=1; continue; }
+ echo $ac_n "OK$ac_c"
+ test -s $temp1 &&
+ LC_ALL=C cmp testdata/$from $temp2 > /dev/null 2>&1 ||
+ { echo "/FAILED"; failed=1; continue; }
+ echo "/OK"
+ rm -f $temp1 $temp2
+ fi
+ done
+ fi
+
+ if test "$subset" = N; then
+ echo $ac_n " suntzu: ASCII -> $to -> ASCII $ac_c"
+ $PROG -f ASCII -t $to testdata/suntzus < /dev/null |
+ $PROG -f $to -t ASCII > $temp1 ||
+ { if test $? -gt 128; then exit 1; fi
+ echo "FAILED"; failed=1; continue; }
+ echo $ac_n "OK$ac_c"
+ LC_ALL=C cmp testdata/suntzus $temp1 ||
+ { echo "/FAILED"; failed=1; continue; }
+ echo "/OK"
+ fi
+done < TESTS
+
+# We read the file named TESTS2. All non-empty lines not starting with
+# `#' are interpreted as commands.
+while read utf8 from filename; do
+ # Ignore empty and comment lines.
+ if test -z "$filename" || test "$utf8" = '#'; then continue; fi
+
+ # Expand the variables now.
+ PROG=`eval echo $ICONV`
+
+ # Test conversion to the endianness dependent encoding.
+ echo $ac_n "test encoder: $utf8 -> $from $ac_c"
+ $PROG -f $utf8 -t $from < testdata/${filename}..${utf8} > $temp1
+ LC_ALL=C cmp $temp1 testdata/${filename}..${from}.BE > /dev/null 2>&1 ||
+ LC_ALL=C cmp $temp1 testdata/${filename}..${from}.LE > /dev/null 2>&1 ||
+ { echo "/FAILED"; failed=1; continue; }
+ echo "OK"
+
+ # Test conversion from the endianness dependent encoding.
+ echo $ac_n "test decoder: $from -> $utf8 $ac_c"
+ $PROG -f $from -t $utf8 < testdata/${filename}..${from}.BE > $temp1
+ LC_ALL=C cmp $temp1 testdata/${filename}..${utf8} > /dev/null 2>&1 ||
+ { echo "/FAILED"; failed=1; continue; }
+ $PROG -f $from -t $utf8 < testdata/${filename}..${from}.LE > $temp1
+ LC_ALL=C cmp $temp1 testdata/${filename}..${utf8} > /dev/null 2>&1 ||
+ { echo "/FAILED"; failed=1; continue; }
+ echo "OK"
+
+ # Test byte swapping behaviour.
+ echo $ac_n "test non-BOM: ${from}BE -> ${from}LE $ac_c"
+ $PROG -f ${from}BE -t ${from}LE < testdata/${filename}..${from}.BE > $temp1
+ LC_ALL=C cmp $temp1 testdata/${filename}..${from}.LE > /dev/null 2>&1 ||
+ { echo "/FAILED"; failed=1; continue; }
+ echo "OK"
+
+ # Test byte swapping behaviour.
+ echo $ac_n "test non-BOM: ${from}LE -> ${from}BE $ac_c"
+ $PROG -f ${from}LE -t ${from}BE < testdata/${filename}..${from}.LE > $temp1
+ LC_ALL=C cmp $temp1 testdata/${filename}..${from}.BE > /dev/null 2>&1 ||
+ { echo "/FAILED"; failed=1; continue; }
+ echo "OK"
+
+done < TESTS2
+
+# Check for crashes in decoders.
+printf '\016\377\377\377\377\377\377\377' > $temp1
+for from in $iconv_modules ; do
+ echo $ac_n "test decoder $from $ac_c"
+ PROG=`eval echo $ICONV`
+ if $PROG -f $from -t UTF8 < $temp1 >/dev/null 2>&1 ; then
+ : # fall through
+ else
+ status=$?
+ if test $status -gt 1 ; then
+ echo "/FAILED"
+ failed=1
+ continue
+ fi
+ fi
+ echo "OK"
+done
+
+exit $failed
+# Local Variables:
+# mode:shell-script
+# End: