| /* | 
 |  * This file is part of the APDS990x sensor driver. | 
 |  * Chip is combined proximity and ambient light sensor. | 
 |  * | 
 |  * Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies). | 
 |  * | 
 |  * Contact: Samu Onkalo <samu.p.onkalo@nokia.com> | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or | 
 |  * modify it under the terms of the GNU General Public License | 
 |  * version 2 as published by the Free Software Foundation. | 
 |  * | 
 |  * This program is distributed in the hope that it will be useful, but | 
 |  * WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | 
 |  * General Public License for more details. | 
 |  * | 
 |  * You should have received a copy of the GNU General Public License | 
 |  * along with this program; if not, write to the Free Software | 
 |  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA | 
 |  * 02110-1301 USA | 
 |  * | 
 |  */ | 
 |  | 
 | #include <linux/kernel.h> | 
 | #include <linux/module.h> | 
 | #include <linux/i2c.h> | 
 | #include <linux/interrupt.h> | 
 | #include <linux/mutex.h> | 
 | #include <linux/regulator/consumer.h> | 
 | #include <linux/pm_runtime.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/wait.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/i2c/apds990x.h> | 
 |  | 
 | /* Register map */ | 
 | #define APDS990X_ENABLE	 0x00 /* Enable of states and interrupts */ | 
 | #define APDS990X_ATIME	 0x01 /* ALS ADC time  */ | 
 | #define APDS990X_PTIME	 0x02 /* Proximity ADC time  */ | 
 | #define APDS990X_WTIME	 0x03 /* Wait time  */ | 
 | #define APDS990X_AILTL	 0x04 /* ALS interrupt low threshold low byte */ | 
 | #define APDS990X_AILTH	 0x05 /* ALS interrupt low threshold hi byte */ | 
 | #define APDS990X_AIHTL	 0x06 /* ALS interrupt hi threshold low byte */ | 
 | #define APDS990X_AIHTH	 0x07 /* ALS interrupt hi threshold hi byte */ | 
 | #define APDS990X_PILTL	 0x08 /* Proximity interrupt low threshold low byte */ | 
 | #define APDS990X_PILTH	 0x09 /* Proximity interrupt low threshold hi byte */ | 
 | #define APDS990X_PIHTL	 0x0a /* Proximity interrupt hi threshold low byte */ | 
 | #define APDS990X_PIHTH	 0x0b /* Proximity interrupt hi threshold hi byte */ | 
 | #define APDS990X_PERS	 0x0c /* Interrupt persistence filters */ | 
 | #define APDS990X_CONFIG	 0x0d /* Configuration */ | 
 | #define APDS990X_PPCOUNT 0x0e /* Proximity pulse count */ | 
 | #define APDS990X_CONTROL 0x0f /* Gain control register */ | 
 | #define APDS990X_REV	 0x11 /* Revision Number */ | 
 | #define APDS990X_ID	 0x12 /* Device ID */ | 
 | #define APDS990X_STATUS	 0x13 /* Device status */ | 
 | #define APDS990X_CDATAL	 0x14 /* Clear ADC low data register */ | 
 | #define APDS990X_CDATAH	 0x15 /* Clear ADC high data register */ | 
 | #define APDS990X_IRDATAL 0x16 /* IR ADC low data register */ | 
 | #define APDS990X_IRDATAH 0x17 /* IR ADC high data register */ | 
 | #define APDS990X_PDATAL	 0x18 /* Proximity ADC low data register */ | 
 | #define APDS990X_PDATAH	 0x19 /* Proximity ADC high data register */ | 
 |  | 
 | /* Control */ | 
 | #define APDS990X_MAX_AGAIN	3 | 
 |  | 
 | /* Enable register */ | 
 | #define APDS990X_EN_PIEN	(0x1 << 5) | 
 | #define APDS990X_EN_AIEN	(0x1 << 4) | 
 | #define APDS990X_EN_WEN		(0x1 << 3) | 
 | #define APDS990X_EN_PEN		(0x1 << 2) | 
 | #define APDS990X_EN_AEN		(0x1 << 1) | 
 | #define APDS990X_EN_PON		(0x1 << 0) | 
 | #define APDS990X_EN_DISABLE_ALL 0 | 
 |  | 
 | /* Status register */ | 
 | #define APDS990X_ST_PINT	(0x1 << 5) | 
 | #define APDS990X_ST_AINT	(0x1 << 4) | 
 |  | 
 | /* I2C access types */ | 
 | #define APDS990x_CMD_TYPE_MASK	(0x03 << 5) | 
 | #define APDS990x_CMD_TYPE_RB	(0x00 << 5) /* Repeated byte */ | 
 | #define APDS990x_CMD_TYPE_INC	(0x01 << 5) /* Auto increment */ | 
 | #define APDS990x_CMD_TYPE_SPE	(0x03 << 5) /* Special function */ | 
 |  | 
 | #define APDS990x_ADDR_SHIFT	0 | 
 | #define APDS990x_CMD		0x80 | 
 |  | 
 | /* Interrupt ack commands */ | 
 | #define APDS990X_INT_ACK_ALS	0x6 | 
 | #define APDS990X_INT_ACK_PS	0x5 | 
 | #define APDS990X_INT_ACK_BOTH	0x7 | 
 |  | 
 | /* ptime */ | 
 | #define APDS990X_PTIME_DEFAULT	0xff /* Recommended conversion time 2.7ms*/ | 
 |  | 
 | /* wtime */ | 
 | #define APDS990X_WTIME_DEFAULT	0xee /* ~50ms wait time */ | 
 |  | 
 | #define APDS990X_TIME_TO_ADC	1024 /* One timetick as ADC count value */ | 
 |  | 
 | /* Persistence */ | 
 | #define APDS990X_APERS_SHIFT	0 | 
 | #define APDS990X_PPERS_SHIFT	4 | 
 |  | 
 | /* Supported ID:s */ | 
 | #define APDS990X_ID_0		0x0 | 
 | #define APDS990X_ID_4		0x4 | 
 | #define APDS990X_ID_29		0x29 | 
 |  | 
 | /* pgain and pdiode settings */ | 
 | #define APDS_PGAIN_1X	       0x0 | 
 | #define APDS_PDIODE_IR	       0x2 | 
 |  | 
 | #define APDS990X_LUX_OUTPUT_SCALE 10 | 
 |  | 
 | /* Reverse chip factors for threshold calculation */ | 
 | struct reverse_factors { | 
 | 	u32 afactor; | 
 | 	int cf1; | 
 | 	int irf1; | 
 | 	int cf2; | 
 | 	int irf2; | 
 | }; | 
 |  | 
 | struct apds990x_chip { | 
 | 	struct apds990x_platform_data	*pdata; | 
 | 	struct i2c_client		*client; | 
 | 	struct mutex			mutex; /* avoid parallel access */ | 
 | 	struct regulator_bulk_data	regs[2]; | 
 | 	wait_queue_head_t		wait; | 
 |  | 
 | 	int	prox_en; | 
 | 	bool	prox_continuous_mode; | 
 | 	bool	lux_wait_fresh_res; | 
 |  | 
 | 	/* Chip parameters */ | 
 | 	struct	apds990x_chip_factors	cf; | 
 | 	struct	reverse_factors		rcf; | 
 | 	u16	atime;		/* als integration time */ | 
 | 	u16	arate;		/* als reporting rate */ | 
 | 	u16	a_max_result;	/* Max possible ADC value with current atime */ | 
 | 	u8	again_meas;	/* Gain used in last measurement */ | 
 | 	u8	again_next;	/* Next calculated gain */ | 
 | 	u8	pgain; | 
 | 	u8	pdiode; | 
 | 	u8	pdrive; | 
 | 	u8	lux_persistence; | 
 | 	u8	prox_persistence; | 
 |  | 
 | 	u32	lux_raw; | 
 | 	u32	lux; | 
 | 	u16	lux_clear; | 
 | 	u16	lux_ir; | 
 | 	u16	lux_calib; | 
 | 	u32	lux_thres_hi; | 
 | 	u32	lux_thres_lo; | 
 |  | 
 | 	u32	prox_thres; | 
 | 	u16	prox_data; | 
 | 	u16	prox_calib; | 
 |  | 
 | 	char	chipname[10]; | 
 | 	u8	revision; | 
 | }; | 
 |  | 
 | #define APDS_CALIB_SCALER		8192 | 
 | #define APDS_LUX_NEUTRAL_CALIB_VALUE	(1 * APDS_CALIB_SCALER) | 
 | #define APDS_PROX_NEUTRAL_CALIB_VALUE	(1 * APDS_CALIB_SCALER) | 
 |  | 
 | #define APDS_PROX_DEF_THRES		600 | 
 | #define APDS_PROX_HYSTERESIS		50 | 
 | #define APDS_LUX_DEF_THRES_HI		101 | 
 | #define APDS_LUX_DEF_THRES_LO		100 | 
 | #define APDS_DEFAULT_PROX_PERS		1 | 
 |  | 
 | #define APDS_TIMEOUT			2000 | 
 | #define APDS_STARTUP_DELAY		25000 /* us */ | 
 | #define APDS_RANGE			65535 | 
 | #define APDS_PROX_RANGE			1023 | 
 | #define APDS_LUX_GAIN_LO_LIMIT		100 | 
 | #define APDS_LUX_GAIN_LO_LIMIT_STRICT	25 | 
 |  | 
 | #define TIMESTEP			87 /* 2.7ms is about 87 / 32 */ | 
 | #define TIME_STEP_SCALER		32 | 
 |  | 
 | #define APDS_LUX_AVERAGING_TIME		50 /* tolerates 50/60Hz ripple */ | 
 | #define APDS_LUX_DEFAULT_RATE		200 | 
 |  | 
 | static const u8 again[]	= {1, 8, 16, 120}; /* ALS gain steps */ | 
 | static const u8 ir_currents[]	= {100, 50, 25, 12}; /* IRled currents in mA */ | 
 |  | 
 | /* Following two tables must match i.e 10Hz rate means 1 as persistence value */ | 
 | static const u16 arates_hz[] = {10, 5, 2, 1}; | 
 | static const u8 apersis[] = {1, 2, 4, 5}; | 
 |  | 
 | /* Regulators */ | 
 | static const char reg_vcc[] = "Vdd"; | 
 | static const char reg_vled[] = "Vled"; | 
 |  | 
 | static int apds990x_read_byte(struct apds990x_chip *chip, u8 reg, u8 *data) | 
 | { | 
 | 	struct i2c_client *client = chip->client; | 
 | 	s32 ret; | 
 |  | 
 | 	reg &= ~APDS990x_CMD_TYPE_MASK; | 
 | 	reg |= APDS990x_CMD | APDS990x_CMD_TYPE_RB; | 
 |  | 
 | 	ret = i2c_smbus_read_byte_data(client, reg); | 
 | 	*data = ret; | 
 | 	return (int)ret; | 
 | } | 
 |  | 
 | static int apds990x_read_word(struct apds990x_chip *chip, u8 reg, u16 *data) | 
 | { | 
 | 	struct i2c_client *client = chip->client; | 
 | 	s32 ret; | 
 |  | 
 | 	reg &= ~APDS990x_CMD_TYPE_MASK; | 
 | 	reg |= APDS990x_CMD | APDS990x_CMD_TYPE_INC; | 
 |  | 
 | 	ret = i2c_smbus_read_word_data(client, reg); | 
 | 	*data = ret; | 
 | 	return (int)ret; | 
 | } | 
 |  | 
 | static int apds990x_write_byte(struct apds990x_chip *chip, u8 reg, u8 data) | 
 | { | 
 | 	struct i2c_client *client = chip->client; | 
 | 	s32 ret; | 
 |  | 
 | 	reg &= ~APDS990x_CMD_TYPE_MASK; | 
 | 	reg |= APDS990x_CMD | APDS990x_CMD_TYPE_RB; | 
 |  | 
 | 	ret = i2c_smbus_write_byte_data(client, reg, data); | 
 | 	return (int)ret; | 
 | } | 
 |  | 
 | static int apds990x_write_word(struct apds990x_chip *chip, u8 reg, u16 data) | 
 | { | 
 | 	struct i2c_client *client = chip->client; | 
 | 	s32 ret; | 
 |  | 
 | 	reg &= ~APDS990x_CMD_TYPE_MASK; | 
 | 	reg |= APDS990x_CMD | APDS990x_CMD_TYPE_INC; | 
 |  | 
 | 	ret = i2c_smbus_write_word_data(client, reg, data); | 
 | 	return (int)ret; | 
 | } | 
 |  | 
 | static int apds990x_mode_on(struct apds990x_chip *chip) | 
 | { | 
 | 	/* ALS is mandatory, proximity optional */ | 
 | 	u8 reg = APDS990X_EN_AIEN | APDS990X_EN_PON | APDS990X_EN_AEN | | 
 | 		APDS990X_EN_WEN; | 
 |  | 
 | 	if (chip->prox_en) | 
 | 		reg |= APDS990X_EN_PIEN | APDS990X_EN_PEN; | 
 |  | 
 | 	return apds990x_write_byte(chip, APDS990X_ENABLE, reg); | 
 | } | 
 |  | 
 | static u16 apds990x_lux_to_threshold(struct apds990x_chip *chip, u32 lux) | 
 | { | 
 | 	u32 thres; | 
 | 	u32 cpl; | 
 | 	u32 ir; | 
 |  | 
 | 	if (lux == 0) | 
 | 		return 0; | 
 | 	else if (lux == APDS_RANGE) | 
 | 		return APDS_RANGE; | 
 |  | 
 | 	/* | 
 | 	 * Reported LUX value is a combination of the IR and CLEAR channel | 
 | 	 * values. However, interrupt threshold is only for clear channel. | 
 | 	 * This function approximates needed HW threshold value for a given | 
 | 	 * LUX value in the current lightning type. | 
 | 	 * IR level compared to visible light varies heavily depending on the | 
 | 	 * source of the light | 
 | 	 * | 
 | 	 * Calculate threshold value for the next measurement period. | 
 | 	 * Math: threshold = lux * cpl where | 
 | 	 * cpl = atime * again / (glass_attenuation * device_factor) | 
 | 	 * (count-per-lux) | 
 | 	 * | 
 | 	 * First remove calibration. Division by four is to avoid overflow | 
 | 	 */ | 
 | 	lux = lux * (APDS_CALIB_SCALER / 4) / (chip->lux_calib / 4); | 
 |  | 
 | 	/* Multiplication by 64 is to increase accuracy */ | 
 | 	cpl = ((u32)chip->atime * (u32)again[chip->again_next] * | 
 | 		APDS_PARAM_SCALE * 64) / (chip->cf.ga * chip->cf.df); | 
 |  | 
 | 	thres = lux * cpl / 64; | 
 | 	/* | 
 | 	 * Convert IR light from the latest result to match with | 
 | 	 * new gain step. This helps to adapt with the current | 
 | 	 * source of light. | 
 | 	 */ | 
 | 	ir = (u32)chip->lux_ir * (u32)again[chip->again_next] / | 
 | 		(u32)again[chip->again_meas]; | 
 |  | 
 | 	/* | 
 | 	 * Compensate count with IR light impact | 
 | 	 * IAC1 > IAC2 (see apds990x_get_lux for formulas) | 
 | 	 */ | 
 | 	if (chip->lux_clear * APDS_PARAM_SCALE >= | 
 | 		chip->rcf.afactor * chip->lux_ir) | 
 | 		thres = (chip->rcf.cf1 * thres + chip->rcf.irf1 * ir) / | 
 | 			APDS_PARAM_SCALE; | 
 | 	else | 
 | 		thres = (chip->rcf.cf2 * thres + chip->rcf.irf2 * ir) / | 
 | 			APDS_PARAM_SCALE; | 
 |  | 
 | 	if (thres >= chip->a_max_result) | 
 | 		thres = chip->a_max_result - 1; | 
 | 	return thres; | 
 | } | 
 |  | 
 | static inline int apds990x_set_atime(struct apds990x_chip *chip, u32 time_ms) | 
 | { | 
 | 	u8 reg_value; | 
 |  | 
 | 	chip->atime = time_ms; | 
 | 	/* Formula is specified in the data sheet */ | 
 | 	reg_value = 256 - ((time_ms * TIME_STEP_SCALER) / TIMESTEP); | 
 | 	/* Calculate max ADC value for given integration time */ | 
 | 	chip->a_max_result = (u16)(256 - reg_value) * APDS990X_TIME_TO_ADC; | 
 | 	return apds990x_write_byte(chip, APDS990X_ATIME, reg_value); | 
 | } | 
 |  | 
 | /* Called always with mutex locked */ | 
 | static int apds990x_refresh_pthres(struct apds990x_chip *chip, int data) | 
 | { | 
 | 	int ret, lo, hi; | 
 |  | 
 | 	/* If the chip is not in use, don't try to access it */ | 
 | 	if (pm_runtime_suspended(&chip->client->dev)) | 
 | 		return 0; | 
 |  | 
 | 	if (data < chip->prox_thres) { | 
 | 		lo = 0; | 
 | 		hi = chip->prox_thres; | 
 | 	} else { | 
 | 		lo = chip->prox_thres - APDS_PROX_HYSTERESIS; | 
 | 		if (chip->prox_continuous_mode) | 
 | 			hi = chip->prox_thres; | 
 | 		else | 
 | 			hi = APDS_RANGE; | 
 | 	} | 
 |  | 
 | 	ret = apds990x_write_word(chip, APDS990X_PILTL, lo); | 
 | 	ret |= apds990x_write_word(chip, APDS990X_PIHTL, hi); | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* Called always with mutex locked */ | 
 | static int apds990x_refresh_athres(struct apds990x_chip *chip) | 
 | { | 
 | 	int ret; | 
 | 	/* If the chip is not in use, don't try to access it */ | 
 | 	if (pm_runtime_suspended(&chip->client->dev)) | 
 | 		return 0; | 
 |  | 
 | 	ret = apds990x_write_word(chip, APDS990X_AILTL, | 
 | 			apds990x_lux_to_threshold(chip, chip->lux_thres_lo)); | 
 | 	ret |= apds990x_write_word(chip, APDS990X_AIHTL, | 
 | 			apds990x_lux_to_threshold(chip, chip->lux_thres_hi)); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* Called always with mutex locked */ | 
 | static void apds990x_force_a_refresh(struct apds990x_chip *chip) | 
 | { | 
 | 	/* This will force ALS interrupt after the next measurement. */ | 
 | 	apds990x_write_word(chip, APDS990X_AILTL, APDS_LUX_DEF_THRES_LO); | 
 | 	apds990x_write_word(chip, APDS990X_AIHTL, APDS_LUX_DEF_THRES_HI); | 
 | } | 
 |  | 
 | /* Called always with mutex locked */ | 
 | static void apds990x_force_p_refresh(struct apds990x_chip *chip) | 
 | { | 
 | 	/* This will force proximity interrupt after the next measurement. */ | 
 | 	apds990x_write_word(chip, APDS990X_PILTL, APDS_PROX_DEF_THRES - 1); | 
 | 	apds990x_write_word(chip, APDS990X_PIHTL, APDS_PROX_DEF_THRES); | 
 | } | 
 |  | 
 | /* Called always with mutex locked */ | 
 | static int apds990x_calc_again(struct apds990x_chip *chip) | 
 | { | 
 | 	int curr_again = chip->again_meas; | 
 | 	int next_again = chip->again_meas; | 
 | 	int ret = 0; | 
 |  | 
 | 	/* Calculate suitable als gain */ | 
 | 	if (chip->lux_clear == chip->a_max_result) | 
 | 		next_again -= 2; /* ALS saturated. Decrease gain by 2 steps */ | 
 | 	else if (chip->lux_clear > chip->a_max_result / 2) | 
 | 		next_again--; | 
 | 	else if (chip->lux_clear < APDS_LUX_GAIN_LO_LIMIT_STRICT) | 
 | 		next_again += 2; /* Too dark. Increase gain by 2 steps */ | 
 | 	else if (chip->lux_clear < APDS_LUX_GAIN_LO_LIMIT) | 
 | 		next_again++; | 
 |  | 
 | 	/* Limit gain to available range */ | 
 | 	if (next_again < 0) | 
 | 		next_again = 0; | 
 | 	else if (next_again > APDS990X_MAX_AGAIN) | 
 | 		next_again = APDS990X_MAX_AGAIN; | 
 |  | 
 | 	/* Let's check can we trust the measured result */ | 
 | 	if (chip->lux_clear == chip->a_max_result) | 
 | 		/* Result can be totally garbage due to saturation */ | 
 | 		ret = -ERANGE; | 
 | 	else if (next_again != curr_again && | 
 | 		chip->lux_clear < APDS_LUX_GAIN_LO_LIMIT_STRICT) | 
 | 		/* | 
 | 		 * Gain is changed and measurement result is very small. | 
 | 		 * Result can be totally garbage due to underflow | 
 | 		 */ | 
 | 		ret = -ERANGE; | 
 |  | 
 | 	chip->again_next = next_again; | 
 | 	apds990x_write_byte(chip, APDS990X_CONTROL, | 
 | 			(chip->pdrive << 6) | | 
 | 			(chip->pdiode << 4) | | 
 | 			(chip->pgain << 2) | | 
 | 			(chip->again_next << 0)); | 
 |  | 
 | 	/* | 
 | 	 * Error means bad result -> re-measurement is needed. The forced | 
 | 	 * refresh uses fastest possible persistence setting to get result | 
 | 	 * as soon as possible. | 
 | 	 */ | 
 | 	if (ret < 0) | 
 | 		apds990x_force_a_refresh(chip); | 
 | 	else | 
 | 		apds990x_refresh_athres(chip); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* Called always with mutex locked */ | 
 | static int apds990x_get_lux(struct apds990x_chip *chip, int clear, int ir) | 
 | { | 
 | 	int iac, iac1, iac2; /* IR adjusted counts */ | 
 | 	u32 lpc; /* Lux per count */ | 
 |  | 
 | 	/* Formulas: | 
 | 	 * iac1 = CF1 * CLEAR_CH - IRF1 * IR_CH | 
 | 	 * iac2 = CF2 * CLEAR_CH - IRF2 * IR_CH | 
 | 	 */ | 
 | 	iac1 = (chip->cf.cf1 * clear - chip->cf.irf1 * ir) / APDS_PARAM_SCALE; | 
 | 	iac2 = (chip->cf.cf2 * clear - chip->cf.irf2 * ir) / APDS_PARAM_SCALE; | 
 |  | 
 | 	iac = max(iac1, iac2); | 
 | 	iac = max(iac, 0); | 
 |  | 
 | 	lpc = APDS990X_LUX_OUTPUT_SCALE * (chip->cf.df * chip->cf.ga) / | 
 | 		(u32)(again[chip->again_meas] * (u32)chip->atime); | 
 |  | 
 | 	return (iac * lpc) / APDS_PARAM_SCALE; | 
 | } | 
 |  | 
 | static int apds990x_ack_int(struct apds990x_chip *chip, u8 mode) | 
 | { | 
 | 	struct i2c_client *client = chip->client; | 
 | 	s32 ret; | 
 | 	u8 reg = APDS990x_CMD | APDS990x_CMD_TYPE_SPE; | 
 |  | 
 | 	switch (mode & (APDS990X_ST_AINT | APDS990X_ST_PINT)) { | 
 | 	case APDS990X_ST_AINT: | 
 | 		reg |= APDS990X_INT_ACK_ALS; | 
 | 		break; | 
 | 	case APDS990X_ST_PINT: | 
 | 		reg |= APDS990X_INT_ACK_PS; | 
 | 		break; | 
 | 	default: | 
 | 		reg |= APDS990X_INT_ACK_BOTH; | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	ret = i2c_smbus_read_byte_data(client, reg); | 
 | 	return (int)ret; | 
 | } | 
 |  | 
 | static irqreturn_t apds990x_irq(int irq, void *data) | 
 | { | 
 | 	struct apds990x_chip *chip = data; | 
 | 	u8 status; | 
 |  | 
 | 	apds990x_read_byte(chip, APDS990X_STATUS, &status); | 
 | 	apds990x_ack_int(chip, status); | 
 |  | 
 | 	mutex_lock(&chip->mutex); | 
 | 	if (!pm_runtime_suspended(&chip->client->dev)) { | 
 | 		if (status & APDS990X_ST_AINT) { | 
 | 			apds990x_read_word(chip, APDS990X_CDATAL, | 
 | 					&chip->lux_clear); | 
 | 			apds990x_read_word(chip, APDS990X_IRDATAL, | 
 | 					&chip->lux_ir); | 
 | 			/* Store used gain for calculations */ | 
 | 			chip->again_meas = chip->again_next; | 
 |  | 
 | 			chip->lux_raw = apds990x_get_lux(chip, | 
 | 							chip->lux_clear, | 
 | 							chip->lux_ir); | 
 |  | 
 | 			if (apds990x_calc_again(chip) == 0) { | 
 | 				/* Result is valid */ | 
 | 				chip->lux = chip->lux_raw; | 
 | 				chip->lux_wait_fresh_res = false; | 
 | 				wake_up(&chip->wait); | 
 | 				sysfs_notify(&chip->client->dev.kobj, | 
 | 					NULL, "lux0_input"); | 
 | 			} | 
 | 		} | 
 |  | 
 | 		if ((status & APDS990X_ST_PINT) && chip->prox_en) { | 
 | 			u16 clr_ch; | 
 |  | 
 | 			apds990x_read_word(chip, APDS990X_CDATAL, &clr_ch); | 
 | 			/* | 
 | 			 * If ALS channel is saturated at min gain, | 
 | 			 * proximity gives false posivite values. | 
 | 			 * Just ignore them. | 
 | 			 */ | 
 | 			if (chip->again_meas == 0 && | 
 | 				clr_ch == chip->a_max_result) | 
 | 				chip->prox_data = 0; | 
 | 			else | 
 | 				apds990x_read_word(chip, | 
 | 						APDS990X_PDATAL, | 
 | 						&chip->prox_data); | 
 |  | 
 | 			apds990x_refresh_pthres(chip, chip->prox_data); | 
 | 			if (chip->prox_data < chip->prox_thres) | 
 | 				chip->prox_data = 0; | 
 | 			else if (!chip->prox_continuous_mode) | 
 | 				chip->prox_data = APDS_PROX_RANGE; | 
 | 			sysfs_notify(&chip->client->dev.kobj, | 
 | 				NULL, "prox0_raw"); | 
 | 		} | 
 | 	} | 
 | 	mutex_unlock(&chip->mutex); | 
 | 	return IRQ_HANDLED; | 
 | } | 
 |  | 
 | static int apds990x_configure(struct apds990x_chip *chip) | 
 | { | 
 | 	/* It is recommended to use disabled mode during these operations */ | 
 | 	apds990x_write_byte(chip, APDS990X_ENABLE, APDS990X_EN_DISABLE_ALL); | 
 |  | 
 | 	/* conversion and wait times for different state machince states */ | 
 | 	apds990x_write_byte(chip, APDS990X_PTIME, APDS990X_PTIME_DEFAULT); | 
 | 	apds990x_write_byte(chip, APDS990X_WTIME, APDS990X_WTIME_DEFAULT); | 
 | 	apds990x_set_atime(chip, APDS_LUX_AVERAGING_TIME); | 
 |  | 
 | 	apds990x_write_byte(chip, APDS990X_CONFIG, 0); | 
 |  | 
 | 	/* Persistence levels */ | 
 | 	apds990x_write_byte(chip, APDS990X_PERS, | 
 | 			(chip->lux_persistence << APDS990X_APERS_SHIFT) | | 
 | 			(chip->prox_persistence << APDS990X_PPERS_SHIFT)); | 
 |  | 
 | 	apds990x_write_byte(chip, APDS990X_PPCOUNT, chip->pdata->ppcount); | 
 |  | 
 | 	/* Start with relatively small gain */ | 
 | 	chip->again_meas = 1; | 
 | 	chip->again_next = 1; | 
 | 	apds990x_write_byte(chip, APDS990X_CONTROL, | 
 | 			(chip->pdrive << 6) | | 
 | 			(chip->pdiode << 4) | | 
 | 			(chip->pgain << 2) | | 
 | 			(chip->again_next << 0)); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int apds990x_detect(struct apds990x_chip *chip) | 
 | { | 
 | 	struct i2c_client *client = chip->client; | 
 | 	int ret; | 
 | 	u8 id; | 
 |  | 
 | 	ret = apds990x_read_byte(chip, APDS990X_ID, &id); | 
 | 	if (ret < 0) { | 
 | 		dev_err(&client->dev, "ID read failed\n"); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	ret = apds990x_read_byte(chip, APDS990X_REV, &chip->revision); | 
 | 	if (ret < 0) { | 
 | 		dev_err(&client->dev, "REV read failed\n"); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	switch (id) { | 
 | 	case APDS990X_ID_0: | 
 | 	case APDS990X_ID_4: | 
 | 	case APDS990X_ID_29: | 
 | 		snprintf(chip->chipname, sizeof(chip->chipname), "APDS-990x"); | 
 | 		break; | 
 | 	default: | 
 | 		ret = -ENODEV; | 
 | 		break; | 
 | 	} | 
 | 	return ret; | 
 | } | 
 |  | 
 | #if defined(CONFIG_PM) || defined(CONFIG_PM_RUNTIME) | 
 | static int apds990x_chip_on(struct apds990x_chip *chip) | 
 | { | 
 | 	int err	 = regulator_bulk_enable(ARRAY_SIZE(chip->regs), | 
 | 					chip->regs); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	usleep_range(APDS_STARTUP_DELAY, 2 * APDS_STARTUP_DELAY); | 
 |  | 
 | 	/* Refresh all configs in case of regulators were off */ | 
 | 	chip->prox_data = 0; | 
 | 	apds990x_configure(chip); | 
 | 	apds990x_mode_on(chip); | 
 | 	return 0; | 
 | } | 
 | #endif | 
 |  | 
 | static int apds990x_chip_off(struct apds990x_chip *chip) | 
 | { | 
 | 	apds990x_write_byte(chip, APDS990X_ENABLE, APDS990X_EN_DISABLE_ALL); | 
 | 	regulator_bulk_disable(ARRAY_SIZE(chip->regs), chip->regs); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static ssize_t apds990x_lux_show(struct device *dev, | 
 | 				 struct device_attribute *attr, char *buf) | 
 | { | 
 | 	struct apds990x_chip *chip = dev_get_drvdata(dev); | 
 | 	ssize_t ret; | 
 | 	u32 result; | 
 | 	long timeout; | 
 |  | 
 | 	if (pm_runtime_suspended(dev)) | 
 | 		return -EIO; | 
 |  | 
 | 	timeout = wait_event_interruptible_timeout(chip->wait, | 
 | 						!chip->lux_wait_fresh_res, | 
 | 						msecs_to_jiffies(APDS_TIMEOUT)); | 
 | 	if (!timeout) | 
 | 		return -EIO; | 
 |  | 
 | 	mutex_lock(&chip->mutex); | 
 | 	result = (chip->lux * chip->lux_calib) / APDS_CALIB_SCALER; | 
 | 	if (result > (APDS_RANGE * APDS990X_LUX_OUTPUT_SCALE)) | 
 | 		result = APDS_RANGE * APDS990X_LUX_OUTPUT_SCALE; | 
 |  | 
 | 	ret = sprintf(buf, "%d.%d\n", | 
 | 		result / APDS990X_LUX_OUTPUT_SCALE, | 
 | 		result % APDS990X_LUX_OUTPUT_SCALE); | 
 | 	mutex_unlock(&chip->mutex); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static DEVICE_ATTR(lux0_input, S_IRUGO, apds990x_lux_show, NULL); | 
 |  | 
 | static ssize_t apds990x_lux_range_show(struct device *dev, | 
 | 				 struct device_attribute *attr, char *buf) | 
 | { | 
 | 	return sprintf(buf, "%u\n", APDS_RANGE); | 
 | } | 
 |  | 
 | static DEVICE_ATTR(lux0_sensor_range, S_IRUGO, apds990x_lux_range_show, NULL); | 
 |  | 
 | static ssize_t apds990x_lux_calib_format_show(struct device *dev, | 
 | 				 struct device_attribute *attr, char *buf) | 
 | { | 
 | 	return sprintf(buf, "%u\n", APDS_CALIB_SCALER); | 
 | } | 
 |  | 
 | static DEVICE_ATTR(lux0_calibscale_default, S_IRUGO, | 
 | 		apds990x_lux_calib_format_show, NULL); | 
 |  | 
 | static ssize_t apds990x_lux_calib_show(struct device *dev, | 
 | 				 struct device_attribute *attr, char *buf) | 
 | { | 
 | 	struct apds990x_chip *chip = dev_get_drvdata(dev); | 
 |  | 
 | 	return sprintf(buf, "%u\n", chip->lux_calib); | 
 | } | 
 |  | 
 | static ssize_t apds990x_lux_calib_store(struct device *dev, | 
 | 				  struct device_attribute *attr, | 
 | 				  const char *buf, size_t len) | 
 | { | 
 | 	struct apds990x_chip *chip = dev_get_drvdata(dev); | 
 | 	unsigned long value; | 
 |  | 
 | 	if (strict_strtoul(buf, 0, &value)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (chip->lux_calib > APDS_RANGE) | 
 | 		return -EINVAL; | 
 |  | 
 | 	chip->lux_calib = value; | 
 |  | 
 | 	return len; | 
 | } | 
 |  | 
 | static DEVICE_ATTR(lux0_calibscale, S_IRUGO | S_IWUSR, apds990x_lux_calib_show, | 
 | 		apds990x_lux_calib_store); | 
 |  | 
 | static ssize_t apds990x_rate_avail(struct device *dev, | 
 | 				   struct device_attribute *attr, char *buf) | 
 | { | 
 | 	int i; | 
 | 	int pos = 0; | 
 | 	for (i = 0; i < ARRAY_SIZE(arates_hz); i++) | 
 | 		pos += sprintf(buf + pos, "%d ", arates_hz[i]); | 
 | 	sprintf(buf + pos - 1, "\n"); | 
 | 	return pos; | 
 | } | 
 |  | 
 | static ssize_t apds990x_rate_show(struct device *dev, | 
 | 				   struct device_attribute *attr, char *buf) | 
 | { | 
 | 	struct apds990x_chip *chip =  dev_get_drvdata(dev); | 
 | 	return sprintf(buf, "%d\n", chip->arate); | 
 | } | 
 |  | 
 | static int apds990x_set_arate(struct apds990x_chip *chip, int rate) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < ARRAY_SIZE(arates_hz); i++) | 
 | 		if (rate >= arates_hz[i]) | 
 | 			break; | 
 |  | 
 | 	if (i == ARRAY_SIZE(arates_hz)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	/* Pick up corresponding persistence value */ | 
 | 	chip->lux_persistence = apersis[i]; | 
 | 	chip->arate = arates_hz[i]; | 
 |  | 
 | 	/* If the chip is not in use, don't try to access it */ | 
 | 	if (pm_runtime_suspended(&chip->client->dev)) | 
 | 		return 0; | 
 |  | 
 | 	/* Persistence levels */ | 
 | 	return apds990x_write_byte(chip, APDS990X_PERS, | 
 | 			(chip->lux_persistence << APDS990X_APERS_SHIFT) | | 
 | 			(chip->prox_persistence << APDS990X_PPERS_SHIFT)); | 
 | } | 
 |  | 
 | static ssize_t apds990x_rate_store(struct device *dev, | 
 | 				  struct device_attribute *attr, | 
 | 				  const char *buf, size_t len) | 
 | { | 
 | 	struct apds990x_chip *chip =  dev_get_drvdata(dev); | 
 | 	unsigned long value; | 
 | 	int ret; | 
 |  | 
 | 	if (strict_strtoul(buf, 0, &value)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	mutex_lock(&chip->mutex); | 
 | 	ret = apds990x_set_arate(chip, value); | 
 | 	mutex_unlock(&chip->mutex); | 
 |  | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 | 	return len; | 
 | } | 
 |  | 
 | static DEVICE_ATTR(lux0_rate_avail, S_IRUGO, apds990x_rate_avail, NULL); | 
 |  | 
 | static DEVICE_ATTR(lux0_rate, S_IRUGO | S_IWUSR, apds990x_rate_show, | 
 | 						 apds990x_rate_store); | 
 |  | 
 | static ssize_t apds990x_prox_show(struct device *dev, | 
 | 				 struct device_attribute *attr, char *buf) | 
 | { | 
 | 	ssize_t ret; | 
 | 	struct apds990x_chip *chip =  dev_get_drvdata(dev); | 
 | 	if (pm_runtime_suspended(dev) || !chip->prox_en) | 
 | 		return -EIO; | 
 |  | 
 | 	mutex_lock(&chip->mutex); | 
 | 	ret = sprintf(buf, "%d\n", chip->prox_data); | 
 | 	mutex_unlock(&chip->mutex); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static DEVICE_ATTR(prox0_raw, S_IRUGO, apds990x_prox_show, NULL); | 
 |  | 
 | static ssize_t apds990x_prox_range_show(struct device *dev, | 
 | 				 struct device_attribute *attr, char *buf) | 
 | { | 
 | 	return sprintf(buf, "%u\n", APDS_PROX_RANGE); | 
 | } | 
 |  | 
 | static DEVICE_ATTR(prox0_sensor_range, S_IRUGO, apds990x_prox_range_show, NULL); | 
 |  | 
 | static ssize_t apds990x_prox_enable_show(struct device *dev, | 
 | 				   struct device_attribute *attr, char *buf) | 
 | { | 
 | 	struct apds990x_chip *chip =  dev_get_drvdata(dev); | 
 | 	return sprintf(buf, "%d\n", chip->prox_en); | 
 | } | 
 |  | 
 | static ssize_t apds990x_prox_enable_store(struct device *dev, | 
 | 				  struct device_attribute *attr, | 
 | 				  const char *buf, size_t len) | 
 | { | 
 | 	struct apds990x_chip *chip =  dev_get_drvdata(dev); | 
 | 	unsigned long value; | 
 |  | 
 | 	if (strict_strtoul(buf, 0, &value)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	mutex_lock(&chip->mutex); | 
 |  | 
 | 	if (!chip->prox_en) | 
 | 		chip->prox_data = 0; | 
 |  | 
 | 	if (value) | 
 | 		chip->prox_en++; | 
 | 	else if (chip->prox_en > 0) | 
 | 		chip->prox_en--; | 
 |  | 
 | 	if (!pm_runtime_suspended(dev)) | 
 | 		apds990x_mode_on(chip); | 
 | 	mutex_unlock(&chip->mutex); | 
 | 	return len; | 
 | } | 
 |  | 
 | static DEVICE_ATTR(prox0_raw_en, S_IRUGO | S_IWUSR, apds990x_prox_enable_show, | 
 | 						   apds990x_prox_enable_store); | 
 |  | 
 | static const char reporting_modes[][9] = {"trigger", "periodic"}; | 
 |  | 
 | static ssize_t apds990x_prox_reporting_mode_show(struct device *dev, | 
 | 				   struct device_attribute *attr, char *buf) | 
 | { | 
 | 	struct apds990x_chip *chip =  dev_get_drvdata(dev); | 
 | 	return sprintf(buf, "%s\n", | 
 | 		reporting_modes[!!chip->prox_continuous_mode]); | 
 | } | 
 |  | 
 | static ssize_t apds990x_prox_reporting_mode_store(struct device *dev, | 
 | 				  struct device_attribute *attr, | 
 | 				  const char *buf, size_t len) | 
 | { | 
 | 	struct apds990x_chip *chip =  dev_get_drvdata(dev); | 
 |  | 
 | 	if (sysfs_streq(buf, reporting_modes[0])) | 
 | 		chip->prox_continuous_mode = 0; | 
 | 	else if (sysfs_streq(buf, reporting_modes[1])) | 
 | 		chip->prox_continuous_mode = 1; | 
 | 	else | 
 | 		return -EINVAL; | 
 | 	return len; | 
 | } | 
 |  | 
 | static DEVICE_ATTR(prox0_reporting_mode, S_IRUGO | S_IWUSR, | 
 | 		apds990x_prox_reporting_mode_show, | 
 | 		apds990x_prox_reporting_mode_store); | 
 |  | 
 | static ssize_t apds990x_prox_reporting_avail_show(struct device *dev, | 
 | 				   struct device_attribute *attr, char *buf) | 
 | { | 
 | 	return sprintf(buf, "%s %s\n", reporting_modes[0], reporting_modes[1]); | 
 | } | 
 |  | 
 | static DEVICE_ATTR(prox0_reporting_mode_avail, S_IRUGO | S_IWUSR, | 
 | 		apds990x_prox_reporting_avail_show, NULL); | 
 |  | 
 |  | 
 | static ssize_t apds990x_lux_thresh_above_show(struct device *dev, | 
 | 				   struct device_attribute *attr, char *buf) | 
 | { | 
 | 	struct apds990x_chip *chip =  dev_get_drvdata(dev); | 
 | 	return sprintf(buf, "%d\n", chip->lux_thres_hi); | 
 | } | 
 |  | 
 | static ssize_t apds990x_lux_thresh_below_show(struct device *dev, | 
 | 				   struct device_attribute *attr, char *buf) | 
 | { | 
 | 	struct apds990x_chip *chip =  dev_get_drvdata(dev); | 
 | 	return sprintf(buf, "%d\n", chip->lux_thres_lo); | 
 | } | 
 |  | 
 | static ssize_t apds990x_set_lux_thresh(struct apds990x_chip *chip, u32 *target, | 
 | 				const char *buf) | 
 | { | 
 | 	int ret = 0; | 
 | 	unsigned long thresh; | 
 |  | 
 | 	if (strict_strtoul(buf, 0, &thresh)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (thresh > APDS_RANGE) | 
 | 		return -EINVAL; | 
 |  | 
 | 	mutex_lock(&chip->mutex); | 
 | 	*target = thresh; | 
 | 	/* | 
 | 	 * Don't update values in HW if we are still waiting for | 
 | 	 * first interrupt to come after device handle open call. | 
 | 	 */ | 
 | 	if (!chip->lux_wait_fresh_res) | 
 | 		apds990x_refresh_athres(chip); | 
 | 	mutex_unlock(&chip->mutex); | 
 | 	return ret; | 
 |  | 
 | } | 
 |  | 
 | static ssize_t apds990x_lux_thresh_above_store(struct device *dev, | 
 | 				  struct device_attribute *attr, | 
 | 				  const char *buf, size_t len) | 
 | { | 
 | 	struct apds990x_chip *chip =  dev_get_drvdata(dev); | 
 | 	int ret = apds990x_set_lux_thresh(chip, &chip->lux_thres_hi, buf); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 | 	return len; | 
 | } | 
 |  | 
 | static ssize_t apds990x_lux_thresh_below_store(struct device *dev, | 
 | 				  struct device_attribute *attr, | 
 | 				  const char *buf, size_t len) | 
 | { | 
 | 	struct apds990x_chip *chip =  dev_get_drvdata(dev); | 
 | 	int ret = apds990x_set_lux_thresh(chip, &chip->lux_thres_lo, buf); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 | 	return len; | 
 | } | 
 |  | 
 | static DEVICE_ATTR(lux0_thresh_above_value, S_IRUGO | S_IWUSR, | 
 | 		apds990x_lux_thresh_above_show, | 
 | 		apds990x_lux_thresh_above_store); | 
 |  | 
 | static DEVICE_ATTR(lux0_thresh_below_value, S_IRUGO | S_IWUSR, | 
 | 		apds990x_lux_thresh_below_show, | 
 | 		apds990x_lux_thresh_below_store); | 
 |  | 
 | static ssize_t apds990x_prox_threshold_show(struct device *dev, | 
 | 				   struct device_attribute *attr, char *buf) | 
 | { | 
 | 	struct apds990x_chip *chip =  dev_get_drvdata(dev); | 
 | 	return sprintf(buf, "%d\n", chip->prox_thres); | 
 | } | 
 |  | 
 | static ssize_t apds990x_prox_threshold_store(struct device *dev, | 
 | 				  struct device_attribute *attr, | 
 | 				  const char *buf, size_t len) | 
 | { | 
 | 	struct apds990x_chip *chip =  dev_get_drvdata(dev); | 
 | 	unsigned long value; | 
 |  | 
 | 	if (strict_strtoul(buf, 0, &value)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if ((value > APDS_RANGE) || (value == 0) || | 
 | 		(value < APDS_PROX_HYSTERESIS)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	mutex_lock(&chip->mutex); | 
 | 	chip->prox_thres = value; | 
 |  | 
 | 	apds990x_force_p_refresh(chip); | 
 | 	mutex_unlock(&chip->mutex); | 
 | 	return len; | 
 | } | 
 |  | 
 | static DEVICE_ATTR(prox0_thresh_above_value, S_IRUGO | S_IWUSR, | 
 | 		apds990x_prox_threshold_show, | 
 | 		apds990x_prox_threshold_store); | 
 |  | 
 | static ssize_t apds990x_power_state_show(struct device *dev, | 
 | 				   struct device_attribute *attr, char *buf) | 
 | { | 
 | 	return sprintf(buf, "%d\n", !pm_runtime_suspended(dev)); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static ssize_t apds990x_power_state_store(struct device *dev, | 
 | 				  struct device_attribute *attr, | 
 | 				  const char *buf, size_t len) | 
 | { | 
 | 	struct apds990x_chip *chip =  dev_get_drvdata(dev); | 
 | 	unsigned long value; | 
 |  | 
 | 	if (strict_strtoul(buf, 0, &value)) | 
 | 		return -EINVAL; | 
 | 	if (value) { | 
 | 		pm_runtime_get_sync(dev); | 
 | 		mutex_lock(&chip->mutex); | 
 | 		chip->lux_wait_fresh_res = true; | 
 | 		apds990x_force_a_refresh(chip); | 
 | 		apds990x_force_p_refresh(chip); | 
 | 		mutex_unlock(&chip->mutex); | 
 | 	} else { | 
 | 		if (!pm_runtime_suspended(dev)) | 
 | 			pm_runtime_put(dev); | 
 | 	} | 
 | 	return len; | 
 | } | 
 |  | 
 | static DEVICE_ATTR(power_state, S_IRUGO | S_IWUSR, | 
 | 		apds990x_power_state_show, | 
 | 		apds990x_power_state_store); | 
 |  | 
 | static ssize_t apds990x_chip_id_show(struct device *dev, | 
 | 				   struct device_attribute *attr, char *buf) | 
 | { | 
 | 	struct apds990x_chip *chip =  dev_get_drvdata(dev); | 
 | 	return sprintf(buf, "%s %d\n", chip->chipname, chip->revision); | 
 | } | 
 |  | 
 | static DEVICE_ATTR(chip_id, S_IRUGO, apds990x_chip_id_show, NULL); | 
 |  | 
 | static struct attribute *sysfs_attrs_ctrl[] = { | 
 | 	&dev_attr_lux0_calibscale.attr, | 
 | 	&dev_attr_lux0_calibscale_default.attr, | 
 | 	&dev_attr_lux0_input.attr, | 
 | 	&dev_attr_lux0_sensor_range.attr, | 
 | 	&dev_attr_lux0_rate.attr, | 
 | 	&dev_attr_lux0_rate_avail.attr, | 
 | 	&dev_attr_lux0_thresh_above_value.attr, | 
 | 	&dev_attr_lux0_thresh_below_value.attr, | 
 | 	&dev_attr_prox0_raw_en.attr, | 
 | 	&dev_attr_prox0_raw.attr, | 
 | 	&dev_attr_prox0_sensor_range.attr, | 
 | 	&dev_attr_prox0_thresh_above_value.attr, | 
 | 	&dev_attr_prox0_reporting_mode.attr, | 
 | 	&dev_attr_prox0_reporting_mode_avail.attr, | 
 | 	&dev_attr_chip_id.attr, | 
 | 	&dev_attr_power_state.attr, | 
 | 	NULL | 
 | }; | 
 |  | 
 | static struct attribute_group apds990x_attribute_group[] = { | 
 | 	{.attrs = sysfs_attrs_ctrl }, | 
 | }; | 
 |  | 
 | static int __devinit apds990x_probe(struct i2c_client *client, | 
 | 				const struct i2c_device_id *id) | 
 | { | 
 | 	struct apds990x_chip *chip; | 
 | 	int err; | 
 |  | 
 | 	chip = kzalloc(sizeof *chip, GFP_KERNEL); | 
 | 	if (!chip) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	i2c_set_clientdata(client, chip); | 
 | 	chip->client  = client; | 
 |  | 
 | 	init_waitqueue_head(&chip->wait); | 
 | 	mutex_init(&chip->mutex); | 
 | 	chip->pdata	= client->dev.platform_data; | 
 |  | 
 | 	if (chip->pdata == NULL) { | 
 | 		dev_err(&client->dev, "platform data is mandatory\n"); | 
 | 		err = -EINVAL; | 
 | 		goto fail1; | 
 | 	} | 
 |  | 
 | 	if (chip->pdata->cf.ga == 0) { | 
 | 		/* set uncovered sensor default parameters */ | 
 | 		chip->cf.ga = 1966; /* 0.48 * APDS_PARAM_SCALE */ | 
 | 		chip->cf.cf1 = 4096; /* 1.00 * APDS_PARAM_SCALE */ | 
 | 		chip->cf.irf1 = 9134; /* 2.23 * APDS_PARAM_SCALE */ | 
 | 		chip->cf.cf2 = 2867; /* 0.70 * APDS_PARAM_SCALE */ | 
 | 		chip->cf.irf2 = 5816; /* 1.42 * APDS_PARAM_SCALE */ | 
 | 		chip->cf.df = 52; | 
 | 	} else { | 
 | 		chip->cf = chip->pdata->cf; | 
 | 	} | 
 |  | 
 | 	/* precalculate inverse chip factors for threshold control */ | 
 | 	chip->rcf.afactor = | 
 | 		(chip->cf.irf1 - chip->cf.irf2) * APDS_PARAM_SCALE / | 
 | 		(chip->cf.cf1 - chip->cf.cf2); | 
 | 	chip->rcf.cf1 = APDS_PARAM_SCALE * APDS_PARAM_SCALE / | 
 | 		chip->cf.cf1; | 
 | 	chip->rcf.irf1 = chip->cf.irf1 * APDS_PARAM_SCALE / | 
 | 		chip->cf.cf1; | 
 | 	chip->rcf.cf2 = APDS_PARAM_SCALE * APDS_PARAM_SCALE / | 
 | 		chip->cf.cf2; | 
 | 	chip->rcf.irf2 = chip->cf.irf2 * APDS_PARAM_SCALE / | 
 | 		chip->cf.cf2; | 
 |  | 
 | 	/* Set something to start with */ | 
 | 	chip->lux_thres_hi = APDS_LUX_DEF_THRES_HI; | 
 | 	chip->lux_thres_lo = APDS_LUX_DEF_THRES_LO; | 
 | 	chip->lux_calib = APDS_LUX_NEUTRAL_CALIB_VALUE; | 
 |  | 
 | 	chip->prox_thres = APDS_PROX_DEF_THRES; | 
 | 	chip->pdrive = chip->pdata->pdrive; | 
 | 	chip->pdiode = APDS_PDIODE_IR; | 
 | 	chip->pgain = APDS_PGAIN_1X; | 
 | 	chip->prox_calib = APDS_PROX_NEUTRAL_CALIB_VALUE; | 
 | 	chip->prox_persistence = APDS_DEFAULT_PROX_PERS; | 
 | 	chip->prox_continuous_mode = false; | 
 |  | 
 | 	chip->regs[0].supply = reg_vcc; | 
 | 	chip->regs[1].supply = reg_vled; | 
 |  | 
 | 	err = regulator_bulk_get(&client->dev, | 
 | 				 ARRAY_SIZE(chip->regs), chip->regs); | 
 | 	if (err < 0) { | 
 | 		dev_err(&client->dev, "Cannot get regulators\n"); | 
 | 		goto fail1; | 
 | 	} | 
 |  | 
 | 	err = regulator_bulk_enable(ARRAY_SIZE(chip->regs), chip->regs); | 
 | 	if (err < 0) { | 
 | 		dev_err(&client->dev, "Cannot enable regulators\n"); | 
 | 		goto fail2; | 
 | 	} | 
 |  | 
 | 	usleep_range(APDS_STARTUP_DELAY, 2 * APDS_STARTUP_DELAY); | 
 |  | 
 | 	err = apds990x_detect(chip); | 
 | 	if (err < 0) { | 
 | 		dev_err(&client->dev, "APDS990X not found\n"); | 
 | 		goto fail3; | 
 | 	} | 
 |  | 
 | 	pm_runtime_set_active(&client->dev); | 
 |  | 
 | 	apds990x_configure(chip); | 
 | 	apds990x_set_arate(chip, APDS_LUX_DEFAULT_RATE); | 
 | 	apds990x_mode_on(chip); | 
 |  | 
 | 	pm_runtime_enable(&client->dev); | 
 |  | 
 | 	if (chip->pdata->setup_resources) { | 
 | 		err = chip->pdata->setup_resources(); | 
 | 		if (err) { | 
 | 			err = -EINVAL; | 
 | 			goto fail3; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	err = sysfs_create_group(&chip->client->dev.kobj, | 
 | 				apds990x_attribute_group); | 
 | 	if (err < 0) { | 
 | 		dev_err(&chip->client->dev, "Sysfs registration failed\n"); | 
 | 		goto fail4; | 
 | 	} | 
 |  | 
 | 	err = request_threaded_irq(client->irq, NULL, | 
 | 				apds990x_irq, | 
 | 				IRQF_TRIGGER_FALLING | IRQF_TRIGGER_LOW | | 
 | 				IRQF_ONESHOT, | 
 | 				"apds990x", chip); | 
 | 	if (err) { | 
 | 		dev_err(&client->dev, "could not get IRQ %d\n", | 
 | 			client->irq); | 
 | 		goto fail5; | 
 | 	} | 
 | 	return err; | 
 | fail5: | 
 | 	sysfs_remove_group(&chip->client->dev.kobj, | 
 | 			&apds990x_attribute_group[0]); | 
 | fail4: | 
 | 	if (chip->pdata && chip->pdata->release_resources) | 
 | 		chip->pdata->release_resources(); | 
 | fail3: | 
 | 	regulator_bulk_disable(ARRAY_SIZE(chip->regs), chip->regs); | 
 | fail2: | 
 | 	regulator_bulk_free(ARRAY_SIZE(chip->regs), chip->regs); | 
 | fail1: | 
 | 	kfree(chip); | 
 | 	return err; | 
 | } | 
 |  | 
 | static int __devexit apds990x_remove(struct i2c_client *client) | 
 | { | 
 | 	struct apds990x_chip *chip = i2c_get_clientdata(client); | 
 |  | 
 | 	free_irq(client->irq, chip); | 
 | 	sysfs_remove_group(&chip->client->dev.kobj, | 
 | 			apds990x_attribute_group); | 
 |  | 
 | 	if (chip->pdata && chip->pdata->release_resources) | 
 | 		chip->pdata->release_resources(); | 
 |  | 
 | 	if (!pm_runtime_suspended(&client->dev)) | 
 | 		apds990x_chip_off(chip); | 
 |  | 
 | 	pm_runtime_disable(&client->dev); | 
 | 	pm_runtime_set_suspended(&client->dev); | 
 |  | 
 | 	regulator_bulk_free(ARRAY_SIZE(chip->regs), chip->regs); | 
 |  | 
 | 	kfree(chip); | 
 | 	return 0; | 
 | } | 
 |  | 
 | #ifdef CONFIG_PM | 
 | static int apds990x_suspend(struct device *dev) | 
 | { | 
 | 	struct i2c_client *client = container_of(dev, struct i2c_client, dev); | 
 | 	struct apds990x_chip *chip = i2c_get_clientdata(client); | 
 |  | 
 | 	apds990x_chip_off(chip); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int apds990x_resume(struct device *dev) | 
 | { | 
 | 	struct i2c_client *client = container_of(dev, struct i2c_client, dev); | 
 | 	struct apds990x_chip *chip = i2c_get_clientdata(client); | 
 |  | 
 | 	/* | 
 | 	 * If we were enabled at suspend time, it is expected | 
 | 	 * everything works nice and smoothly. Chip_on is enough | 
 | 	 */ | 
 | 	apds990x_chip_on(chip); | 
 |  | 
 | 	return 0; | 
 | } | 
 | #else | 
 | #define apds990x_suspend  NULL | 
 | #define apds990x_resume	  NULL | 
 | #define apds990x_shutdown NULL | 
 | #endif | 
 |  | 
 | #ifdef CONFIG_PM_RUNTIME | 
 | static int apds990x_runtime_suspend(struct device *dev) | 
 | { | 
 | 	struct i2c_client *client = container_of(dev, struct i2c_client, dev); | 
 | 	struct apds990x_chip *chip = i2c_get_clientdata(client); | 
 |  | 
 | 	apds990x_chip_off(chip); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int apds990x_runtime_resume(struct device *dev) | 
 | { | 
 | 	struct i2c_client *client = container_of(dev, struct i2c_client, dev); | 
 | 	struct apds990x_chip *chip = i2c_get_clientdata(client); | 
 |  | 
 | 	apds990x_chip_on(chip); | 
 | 	return 0; | 
 | } | 
 |  | 
 | #endif | 
 |  | 
 | static const struct i2c_device_id apds990x_id[] = { | 
 | 	{"apds990x", 0 }, | 
 | 	{} | 
 | }; | 
 |  | 
 | MODULE_DEVICE_TABLE(i2c, apds990x_id); | 
 |  | 
 | static const struct dev_pm_ops apds990x_pm_ops = { | 
 | 	SET_SYSTEM_SLEEP_PM_OPS(apds990x_suspend, apds990x_resume) | 
 | 	SET_RUNTIME_PM_OPS(apds990x_runtime_suspend, | 
 | 			apds990x_runtime_resume, | 
 | 			NULL) | 
 | }; | 
 |  | 
 | static struct i2c_driver apds990x_driver = { | 
 | 	.driver	 = { | 
 | 		.name	= "apds990x", | 
 | 		.owner	= THIS_MODULE, | 
 | 		.pm	= &apds990x_pm_ops, | 
 | 	}, | 
 | 	.probe	  = apds990x_probe, | 
 | 	.remove	  = __devexit_p(apds990x_remove), | 
 | 	.id_table = apds990x_id, | 
 | }; | 
 |  | 
 | module_i2c_driver(apds990x_driver); | 
 |  | 
 | MODULE_DESCRIPTION("APDS990X combined ALS and proximity sensor"); | 
 | MODULE_AUTHOR("Samu Onkalo, Nokia Corporation"); | 
 | MODULE_LICENSE("GPL v2"); |