| /* Texas Instruments TMP102 SMBus temperature sensor driver | 
 |  * | 
 |  * Copyright (C) 2010 Steven King <sfking@fdwdc.com> | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License as published by | 
 |  * the Free Software Foundation; either version 2 of the License, or | 
 |  * (at your option) any later version. | 
 |  * | 
 |  * This program is distributed in the hope that it will be useful, | 
 |  * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 |  * GNU General Public License for more details. | 
 |  * | 
 |  * You should have received a copy of the GNU General Public License | 
 |  * along with this program; if not, write to the Free Software | 
 |  * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA | 
 |  */ | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/init.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/i2c.h> | 
 | #include <linux/hwmon.h> | 
 | #include <linux/hwmon-sysfs.h> | 
 | #include <linux/err.h> | 
 | #include <linux/mutex.h> | 
 | #include <linux/device.h> | 
 |  | 
 | #define	DRIVER_NAME "tmp102" | 
 |  | 
 | #define	TMP102_TEMP_REG			0x00 | 
 | #define	TMP102_CONF_REG			0x01 | 
 | /* note: these bit definitions are byte swapped */ | 
 | #define		TMP102_CONF_SD		0x0100 | 
 | #define		TMP102_CONF_TM		0x0200 | 
 | #define		TMP102_CONF_POL		0x0400 | 
 | #define		TMP102_CONF_F0		0x0800 | 
 | #define		TMP102_CONF_F1		0x1000 | 
 | #define		TMP102_CONF_R0		0x2000 | 
 | #define		TMP102_CONF_R1		0x4000 | 
 | #define		TMP102_CONF_OS		0x8000 | 
 | #define		TMP102_CONF_EM		0x0010 | 
 | #define		TMP102_CONF_AL		0x0020 | 
 | #define		TMP102_CONF_CR0		0x0040 | 
 | #define		TMP102_CONF_CR1		0x0080 | 
 | #define	TMP102_TLOW_REG			0x02 | 
 | #define	TMP102_THIGH_REG		0x03 | 
 |  | 
 | struct tmp102 { | 
 | 	struct device *hwmon_dev; | 
 | 	struct mutex lock; | 
 | 	u16 config_orig; | 
 | 	unsigned long last_update; | 
 | 	int temp[3]; | 
 | }; | 
 |  | 
 | /* convert left adjusted 13-bit TMP102 register value to milliCelsius */ | 
 | static inline int tmp102_reg_to_mC(s16 val) | 
 | { | 
 | 	return ((val & ~0x01) * 1000) / 128; | 
 | } | 
 |  | 
 | /* convert milliCelsius to left adjusted 13-bit TMP102 register value */ | 
 | static inline u16 tmp102_mC_to_reg(int val) | 
 | { | 
 | 	return (val * 128) / 1000; | 
 | } | 
 |  | 
 | static const u8 tmp102_reg[] = { | 
 | 	TMP102_TEMP_REG, | 
 | 	TMP102_TLOW_REG, | 
 | 	TMP102_THIGH_REG, | 
 | }; | 
 |  | 
 | static struct tmp102 *tmp102_update_device(struct i2c_client *client) | 
 | { | 
 | 	struct tmp102 *tmp102 = i2c_get_clientdata(client); | 
 |  | 
 | 	mutex_lock(&tmp102->lock); | 
 | 	if (time_after(jiffies, tmp102->last_update + HZ / 3)) { | 
 | 		int i; | 
 | 		for (i = 0; i < ARRAY_SIZE(tmp102->temp); ++i) { | 
 | 			int status = i2c_smbus_read_word_swapped(client, | 
 | 								 tmp102_reg[i]); | 
 | 			if (status > -1) | 
 | 				tmp102->temp[i] = tmp102_reg_to_mC(status); | 
 | 		} | 
 | 		tmp102->last_update = jiffies; | 
 | 	} | 
 | 	mutex_unlock(&tmp102->lock); | 
 | 	return tmp102; | 
 | } | 
 |  | 
 | static ssize_t tmp102_show_temp(struct device *dev, | 
 | 				struct device_attribute *attr, | 
 | 				char *buf) | 
 | { | 
 | 	struct sensor_device_attribute *sda = to_sensor_dev_attr(attr); | 
 | 	struct tmp102 *tmp102 = tmp102_update_device(to_i2c_client(dev)); | 
 |  | 
 | 	return sprintf(buf, "%d\n", tmp102->temp[sda->index]); | 
 | } | 
 |  | 
 | static ssize_t tmp102_set_temp(struct device *dev, | 
 | 			       struct device_attribute *attr, | 
 | 			       const char *buf, size_t count) | 
 | { | 
 | 	struct sensor_device_attribute *sda = to_sensor_dev_attr(attr); | 
 | 	struct i2c_client *client = to_i2c_client(dev); | 
 | 	struct tmp102 *tmp102 = i2c_get_clientdata(client); | 
 | 	long val; | 
 | 	int status; | 
 |  | 
 | 	if (kstrtol(buf, 10, &val) < 0) | 
 | 		return -EINVAL; | 
 | 	val = SENSORS_LIMIT(val, -256000, 255000); | 
 |  | 
 | 	mutex_lock(&tmp102->lock); | 
 | 	tmp102->temp[sda->index] = val; | 
 | 	status = i2c_smbus_write_word_swapped(client, tmp102_reg[sda->index], | 
 | 					      tmp102_mC_to_reg(val)); | 
 | 	mutex_unlock(&tmp102->lock); | 
 | 	return status ? : count; | 
 | } | 
 |  | 
 | static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, tmp102_show_temp, NULL , 0); | 
 |  | 
 | static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO, tmp102_show_temp, | 
 | 			  tmp102_set_temp, 1); | 
 |  | 
 | static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, tmp102_show_temp, | 
 | 			  tmp102_set_temp, 2); | 
 |  | 
 | static struct attribute *tmp102_attributes[] = { | 
 | 	&sensor_dev_attr_temp1_input.dev_attr.attr, | 
 | 	&sensor_dev_attr_temp1_max_hyst.dev_attr.attr, | 
 | 	&sensor_dev_attr_temp1_max.dev_attr.attr, | 
 | 	NULL | 
 | }; | 
 |  | 
 | static const struct attribute_group tmp102_attr_group = { | 
 | 	.attrs = tmp102_attributes, | 
 | }; | 
 |  | 
 | #define TMP102_CONFIG  (TMP102_CONF_TM | TMP102_CONF_EM | TMP102_CONF_CR1) | 
 | #define TMP102_CONFIG_RD_ONLY (TMP102_CONF_R0 | TMP102_CONF_R1 | TMP102_CONF_AL) | 
 |  | 
 | static int __devinit tmp102_probe(struct i2c_client *client, | 
 | 				  const struct i2c_device_id *id) | 
 | { | 
 | 	struct tmp102 *tmp102; | 
 | 	int status; | 
 |  | 
 | 	if (!i2c_check_functionality(client->adapter, | 
 | 				     I2C_FUNC_SMBUS_WORD_DATA)) { | 
 | 		dev_err(&client->dev, "adapter doesn't support SMBus word " | 
 | 			"transactions\n"); | 
 | 		return -ENODEV; | 
 | 	} | 
 |  | 
 | 	tmp102 = kzalloc(sizeof(*tmp102), GFP_KERNEL); | 
 | 	if (!tmp102) { | 
 | 		dev_dbg(&client->dev, "kzalloc failed\n"); | 
 | 		return -ENOMEM; | 
 | 	} | 
 | 	i2c_set_clientdata(client, tmp102); | 
 |  | 
 | 	status = i2c_smbus_read_word_swapped(client, TMP102_CONF_REG); | 
 | 	if (status < 0) { | 
 | 		dev_err(&client->dev, "error reading config register\n"); | 
 | 		goto fail_free; | 
 | 	} | 
 | 	tmp102->config_orig = status; | 
 | 	status = i2c_smbus_write_word_swapped(client, TMP102_CONF_REG, | 
 | 					      TMP102_CONFIG); | 
 | 	if (status < 0) { | 
 | 		dev_err(&client->dev, "error writing config register\n"); | 
 | 		goto fail_restore_config; | 
 | 	} | 
 | 	status = i2c_smbus_read_word_swapped(client, TMP102_CONF_REG); | 
 | 	if (status < 0) { | 
 | 		dev_err(&client->dev, "error reading config register\n"); | 
 | 		goto fail_restore_config; | 
 | 	} | 
 | 	status &= ~TMP102_CONFIG_RD_ONLY; | 
 | 	if (status != TMP102_CONFIG) { | 
 | 		dev_err(&client->dev, "config settings did not stick\n"); | 
 | 		status = -ENODEV; | 
 | 		goto fail_restore_config; | 
 | 	} | 
 | 	tmp102->last_update = jiffies - HZ; | 
 | 	mutex_init(&tmp102->lock); | 
 |  | 
 | 	status = sysfs_create_group(&client->dev.kobj, &tmp102_attr_group); | 
 | 	if (status) { | 
 | 		dev_dbg(&client->dev, "could not create sysfs files\n"); | 
 | 		goto fail_restore_config; | 
 | 	} | 
 | 	tmp102->hwmon_dev = hwmon_device_register(&client->dev); | 
 | 	if (IS_ERR(tmp102->hwmon_dev)) { | 
 | 		dev_dbg(&client->dev, "unable to register hwmon device\n"); | 
 | 		status = PTR_ERR(tmp102->hwmon_dev); | 
 | 		goto fail_remove_sysfs; | 
 | 	} | 
 |  | 
 | 	dev_info(&client->dev, "initialized\n"); | 
 |  | 
 | 	return 0; | 
 |  | 
 | fail_remove_sysfs: | 
 | 	sysfs_remove_group(&client->dev.kobj, &tmp102_attr_group); | 
 | fail_restore_config: | 
 | 	i2c_smbus_write_word_swapped(client, TMP102_CONF_REG, | 
 | 				     tmp102->config_orig); | 
 | fail_free: | 
 | 	kfree(tmp102); | 
 |  | 
 | 	return status; | 
 | } | 
 |  | 
 | static int __devexit tmp102_remove(struct i2c_client *client) | 
 | { | 
 | 	struct tmp102 *tmp102 = i2c_get_clientdata(client); | 
 |  | 
 | 	hwmon_device_unregister(tmp102->hwmon_dev); | 
 | 	sysfs_remove_group(&client->dev.kobj, &tmp102_attr_group); | 
 |  | 
 | 	/* Stop monitoring if device was stopped originally */ | 
 | 	if (tmp102->config_orig & TMP102_CONF_SD) { | 
 | 		int config; | 
 |  | 
 | 		config = i2c_smbus_read_word_swapped(client, TMP102_CONF_REG); | 
 | 		if (config >= 0) | 
 | 			i2c_smbus_write_word_swapped(client, TMP102_CONF_REG, | 
 | 						     config | TMP102_CONF_SD); | 
 | 	} | 
 |  | 
 | 	kfree(tmp102); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | #ifdef CONFIG_PM | 
 | static int tmp102_suspend(struct device *dev) | 
 | { | 
 | 	struct i2c_client *client = to_i2c_client(dev); | 
 | 	int config; | 
 |  | 
 | 	config = i2c_smbus_read_word_swapped(client, TMP102_CONF_REG); | 
 | 	if (config < 0) | 
 | 		return config; | 
 |  | 
 | 	config |= TMP102_CONF_SD; | 
 | 	return i2c_smbus_write_word_swapped(client, TMP102_CONF_REG, config); | 
 | } | 
 |  | 
 | static int tmp102_resume(struct device *dev) | 
 | { | 
 | 	struct i2c_client *client = to_i2c_client(dev); | 
 | 	int config; | 
 |  | 
 | 	config = i2c_smbus_read_word_swapped(client, TMP102_CONF_REG); | 
 | 	if (config < 0) | 
 | 		return config; | 
 |  | 
 | 	config &= ~TMP102_CONF_SD; | 
 | 	return i2c_smbus_write_word_swapped(client, TMP102_CONF_REG, config); | 
 | } | 
 |  | 
 | static const struct dev_pm_ops tmp102_dev_pm_ops = { | 
 | 	.suspend	= tmp102_suspend, | 
 | 	.resume		= tmp102_resume, | 
 | }; | 
 |  | 
 | #define TMP102_DEV_PM_OPS (&tmp102_dev_pm_ops) | 
 | #else | 
 | #define	TMP102_DEV_PM_OPS NULL | 
 | #endif /* CONFIG_PM */ | 
 |  | 
 | static const struct i2c_device_id tmp102_id[] = { | 
 | 	{ "tmp102", 0 }, | 
 | 	{ } | 
 | }; | 
 | MODULE_DEVICE_TABLE(i2c, tmp102_id); | 
 |  | 
 | static struct i2c_driver tmp102_driver = { | 
 | 	.driver.name	= DRIVER_NAME, | 
 | 	.driver.pm	= TMP102_DEV_PM_OPS, | 
 | 	.probe		= tmp102_probe, | 
 | 	.remove		= __devexit_p(tmp102_remove), | 
 | 	.id_table	= tmp102_id, | 
 | }; | 
 |  | 
 | module_i2c_driver(tmp102_driver); | 
 |  | 
 | MODULE_AUTHOR("Steven King <sfking@fdwdc.com>"); | 
 | MODULE_DESCRIPTION("Texas Instruments TMP102 temperature sensor driver"); | 
 | MODULE_LICENSE("GPL"); |