Gitiles
Code Review Sign In
192.168.1.100 / T106_DC / 14eeb0841de3ef67f22e0f6232f55bce7f3db07d / . / ap / os / linux / linux-3.4.x / drivers / scsi / aha1542.h
blob: b871d2b57f93235652d55761cc66617f2a52c291 [file] [log] [blame]
lh9ed821d2023-04-07 01:36:19 -0700[diff] [blame]1#ifndef _AHA1542_H
2
3/* $Id: aha1542.h,v 1.1 1992/07/24 06:27:38 root Exp root $
4 *
5 * Header file for the adaptec 1542 driver for Linux
6 *
7 * $Log: aha1542.h,v $
8 * Revision 1.1 1992/07/24 06:27:38 root
9 * Initial revision
10 *
11 * Revision 1.2 1992/07/04 18:41:49 root
12 * Replaced distribution with current drivers
13 *
14 * Revision 1.3 1992/06/23 23:58:20 root
15 * Fixes.
16 *
17 * Revision 1.2 1992/05/26 22:13:23 root
18 * Changed bug that prevented DMA above first 2 mbytes.
19 *
20 * Revision 1.1 1992/05/22 21:00:29 root
21 * Initial revision
22 *
23 * Revision 1.1 1992/04/24 18:01:50 root
24 * Initial revision
25 *
26 * Revision 1.1 1992/04/02 03:23:13 drew
27 * Initial revision
28 *
29 * Revision 1.3 1992/01/27 14:46:29 tthorn
30 * *** empty log message ***
31 *
32 */
33
34#include <linux/types.h>
35
36/* I/O Port interface 4.2 */
37/* READ */
38#define STATUS(base) base
39#define STST 0x80 /* Self Test in Progress */
40#define DIAGF 0x40 /* Internal Diagnostic Failure */
41#define INIT 0x20 /* Mailbox Initialization Required */
42#define IDLE 0x10 /* SCSI Host Adapter Idle */
43#define CDF 0x08 /* Command/Data Out Port Full */
44#define DF 0x04 /* Data In Port Full */
45#define INVDCMD 0x01 /* Invalid H A Command */
46#define STATMASK 0xfd /* 0x02 is reserved */
47
48#define INTRFLAGS(base) (STATUS(base)+2)
49#define ANYINTR 0x80 /* Any Interrupt */
50#define SCRD 0x08 /* SCSI Reset Detected */
51#define HACC 0x04 /* HA Command Complete */
52#define MBOA 0x02 /* MBO Empty */
53#define MBIF 0x01 /* MBI Full */
54#define INTRMASK 0x8f
55
56/* WRITE */
57#define CONTROL(base) STATUS(base)
58#define HRST 0x80 /* Hard Reset */
59#define SRST 0x40 /* Soft Reset */
60#define IRST 0x20 /* Interrupt Reset */
61#define SCRST 0x10 /* SCSI Bus Reset */
62
63/* READ/WRITE */
64#define DATA(base) (STATUS(base)+1)
65#define CMD_NOP 0x00 /* No Operation */
66#define CMD_MBINIT 0x01 /* Mailbox Initialization */
67#define CMD_START_SCSI 0x02 /* Start SCSI Command */
68#define CMD_INQUIRY 0x04 /* Adapter Inquiry */
69#define CMD_EMBOI 0x05 /* Enable MailBox Out Interrupt */
70#define CMD_BUSON_TIME 0x07 /* Set Bus-On Time */
71#define CMD_BUSOFF_TIME 0x08 /* Set Bus-Off Time */
72#define CMD_DMASPEED 0x09 /* Set AT Bus Transfer Speed */
73#define CMD_RETDEVS 0x0a /* Return Installed Devices */
74#define CMD_RETCONF 0x0b /* Return Configuration Data */
75#define CMD_RETSETUP 0x0d /* Return Setup Data */
76#define CMD_ECHO 0x1f /* ECHO Command Data */
77
78#define CMD_EXTBIOS 0x28 /* Return extend bios information only 1542C */
79#define CMD_MBENABLE 0x29 /* Set Mailbox Interface enable only 1542C */
80
81/* Mailbox Definition 5.2.1 and 5.2.2 */
82struct mailbox {
83 unchar status; /* Command/Status */
84 unchar ccbptr[3]; /* msb, .., lsb */
85};
86
87/* This is used with scatter-gather */
88struct chain {
89 unchar datalen[3]; /* Size of this part of chain */
90 unchar dataptr[3]; /* Location of data */
91};
92
93/* These belong in scsi.h also */
94static inline void any2scsi(u8 *p, u32 v)
95{
96 p[0] = v >> 16;
97 p[1] = v >> 8;
98 p[2] = v;
99}
100
101#define scsi2int(up) ( (((long)*(up)) << 16) + (((long)(up)[1]) << 8) + ((long)(up)[2]) )
102
103#define xany2scsi(up, p) \
104(up)[0] = ((long)(p)) >> 24; \
105(up)[1] = ((long)(p)) >> 16; \
106(up)[2] = ((long)(p)) >> 8; \
107(up)[3] = ((long)(p));
108
109#define xscsi2int(up) ( (((long)(up)[0]) << 24) + (((long)(up)[1]) << 16) \
110 + (((long)(up)[2]) << 8) + ((long)(up)[3]) )
111
112#define MAX_CDB 12
113#define MAX_SENSE 14
114
115struct ccb { /* Command Control Block 5.3 */
116 unchar op; /* Command Control Block Operation Code */
117 unchar idlun; /* op=0,2:Target Id, op=1:Initiator Id */
118 /* Outbound data transfer, length is checked*/
119 /* Inbound data transfer, length is checked */
120 /* Logical Unit Number */
121 unchar cdblen; /* SCSI Command Length */
122 unchar rsalen; /* Request Sense Allocation Length/Disable */
123 unchar datalen[3]; /* Data Length (msb, .., lsb) */
124 unchar dataptr[3]; /* Data Pointer */
125 unchar linkptr[3]; /* Link Pointer */
126 unchar commlinkid; /* Command Linking Identifier */
127 unchar hastat; /* Host Adapter Status (HASTAT) */
128 unchar tarstat; /* Target Device Status */
129 unchar reserved[2];
130 unchar cdb[MAX_CDB+MAX_SENSE];/* SCSI Command Descriptor Block */
131 /* REQUEST SENSE */
132};
133
134static int aha1542_detect(struct scsi_host_template *);
135static int aha1542_queuecommand(struct Scsi_Host *, struct scsi_cmnd *);
136static int aha1542_bus_reset(Scsi_Cmnd * SCpnt);
137static int aha1542_dev_reset(Scsi_Cmnd * SCpnt);
138static int aha1542_host_reset(Scsi_Cmnd * SCpnt);
139#if 0
140static int aha1542_old_abort(Scsi_Cmnd * SCpnt);
141static int aha1542_old_reset(Scsi_Cmnd *, unsigned int);
142#endif
143static int aha1542_biosparam(struct scsi_device *, struct block_device *,
144 sector_t, int *);
145
146#define AHA1542_MAILBOXES 8
147#define AHA1542_SCATTER 16
148#define AHA1542_CMDLUN 1
149
150#endif