| lh | 9ed821d | 2023-04-07 01:36:19 -0700 | [diff] [blame] | 1 | /* | 
|  | 2 | * LM73 Sensor driver | 
|  | 3 | * Based on LM75 | 
|  | 4 | * | 
|  | 5 | * Copyright (C) 2007, CenoSYS (www.cenosys.com). | 
|  | 6 | * Copyright (C) 2009, Bollore telecom (www.bolloretelecom.eu). | 
|  | 7 | * | 
|  | 8 | * Guillaume Ligneul <guillaume.ligneul@gmail.com> | 
|  | 9 | * Adrien Demarez <adrien.demarez@bolloretelecom.eu> | 
|  | 10 | * Jeremy Laine <jeremy.laine@bolloretelecom.eu> | 
|  | 11 | * | 
|  | 12 | * This software program is licensed subject to the GNU General Public License | 
|  | 13 | * (GPL).Version 2,June 1991, available at | 
|  | 14 | * http://www.gnu.org/licenses/old-licenses/gpl-2.0.html | 
|  | 15 | */ | 
|  | 16 |  | 
|  | 17 | #include <linux/module.h> | 
|  | 18 | #include <linux/init.h> | 
|  | 19 | #include <linux/i2c.h> | 
|  | 20 | #include <linux/hwmon.h> | 
|  | 21 | #include <linux/hwmon-sysfs.h> | 
|  | 22 | #include <linux/err.h> | 
|  | 23 |  | 
|  | 24 |  | 
|  | 25 | /* Addresses scanned */ | 
|  | 26 | static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4c, | 
|  | 27 | 0x4d, 0x4e, I2C_CLIENT_END }; | 
|  | 28 |  | 
|  | 29 | /* LM73 registers */ | 
|  | 30 | #define LM73_REG_INPUT		0x00 | 
|  | 31 | #define LM73_REG_CONF		0x01 | 
|  | 32 | #define LM73_REG_MAX		0x02 | 
|  | 33 | #define LM73_REG_MIN		0x03 | 
|  | 34 | #define LM73_REG_CTRL		0x04 | 
|  | 35 | #define LM73_REG_ID		0x07 | 
|  | 36 |  | 
|  | 37 | #define LM73_ID			0x9001	/* 0x0190, byte-swapped */ | 
|  | 38 | #define DRVNAME			"lm73" | 
|  | 39 | #define LM73_TEMP_MIN		(-40) | 
|  | 40 | #define LM73_TEMP_MAX		150 | 
|  | 41 |  | 
|  | 42 | /*-----------------------------------------------------------------------*/ | 
|  | 43 |  | 
|  | 44 |  | 
|  | 45 | static ssize_t set_temp(struct device *dev, struct device_attribute *da, | 
|  | 46 | const char *buf, size_t count) | 
|  | 47 | { | 
|  | 48 | struct sensor_device_attribute *attr = to_sensor_dev_attr(da); | 
|  | 49 | struct i2c_client *client = to_i2c_client(dev); | 
|  | 50 | long temp; | 
|  | 51 | short value; | 
|  | 52 | s32 err; | 
|  | 53 |  | 
|  | 54 | int status = kstrtol(buf, 10, &temp); | 
|  | 55 | if (status < 0) | 
|  | 56 | return status; | 
|  | 57 |  | 
|  | 58 | /* Write value */ | 
|  | 59 | value = (short) SENSORS_LIMIT(temp/250, (LM73_TEMP_MIN*4), | 
|  | 60 | (LM73_TEMP_MAX*4)) << 5; | 
|  | 61 | err = i2c_smbus_write_word_swapped(client, attr->index, value); | 
|  | 62 | return (err < 0) ? err : count; | 
|  | 63 | } | 
|  | 64 |  | 
|  | 65 | static ssize_t show_temp(struct device *dev, struct device_attribute *da, | 
|  | 66 | char *buf) | 
|  | 67 | { | 
|  | 68 | struct sensor_device_attribute *attr = to_sensor_dev_attr(da); | 
|  | 69 | struct i2c_client *client = to_i2c_client(dev); | 
|  | 70 | int temp; | 
|  | 71 |  | 
|  | 72 | s32 err = i2c_smbus_read_word_swapped(client, attr->index); | 
|  | 73 | if (err < 0) | 
|  | 74 | return err; | 
|  | 75 |  | 
|  | 76 | /* use integer division instead of equivalent right shift to | 
|  | 77 | guarantee arithmetic shift and preserve the sign */ | 
|  | 78 | temp = (((s16) err) * 250) / 32; | 
|  | 79 | return scnprintf(buf, PAGE_SIZE, "%d\n", temp); | 
|  | 80 | } | 
|  | 81 |  | 
|  | 82 |  | 
|  | 83 | /*-----------------------------------------------------------------------*/ | 
|  | 84 |  | 
|  | 85 | /* sysfs attributes for hwmon */ | 
|  | 86 |  | 
|  | 87 | static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, | 
|  | 88 | show_temp, set_temp, LM73_REG_MAX); | 
|  | 89 | static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, | 
|  | 90 | show_temp, set_temp, LM73_REG_MIN); | 
|  | 91 | static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, | 
|  | 92 | show_temp, NULL, LM73_REG_INPUT); | 
|  | 93 |  | 
|  | 94 |  | 
|  | 95 | static struct attribute *lm73_attributes[] = { | 
|  | 96 | &sensor_dev_attr_temp1_input.dev_attr.attr, | 
|  | 97 | &sensor_dev_attr_temp1_max.dev_attr.attr, | 
|  | 98 | &sensor_dev_attr_temp1_min.dev_attr.attr, | 
|  | 99 |  | 
|  | 100 | NULL | 
|  | 101 | }; | 
|  | 102 |  | 
|  | 103 | static const struct attribute_group lm73_group = { | 
|  | 104 | .attrs = lm73_attributes, | 
|  | 105 | }; | 
|  | 106 |  | 
|  | 107 | /*-----------------------------------------------------------------------*/ | 
|  | 108 |  | 
|  | 109 | /* device probe and removal */ | 
|  | 110 |  | 
|  | 111 | static int | 
|  | 112 | lm73_probe(struct i2c_client *client, const struct i2c_device_id *id) | 
|  | 113 | { | 
|  | 114 | struct device *hwmon_dev; | 
|  | 115 | int status; | 
|  | 116 |  | 
|  | 117 | /* Register sysfs hooks */ | 
|  | 118 | status = sysfs_create_group(&client->dev.kobj, &lm73_group); | 
|  | 119 | if (status) | 
|  | 120 | return status; | 
|  | 121 |  | 
|  | 122 | hwmon_dev = hwmon_device_register(&client->dev); | 
|  | 123 | if (IS_ERR(hwmon_dev)) { | 
|  | 124 | status = PTR_ERR(hwmon_dev); | 
|  | 125 | goto exit_remove; | 
|  | 126 | } | 
|  | 127 | i2c_set_clientdata(client, hwmon_dev); | 
|  | 128 |  | 
|  | 129 | dev_info(&client->dev, "%s: sensor '%s'\n", | 
|  | 130 | dev_name(hwmon_dev), client->name); | 
|  | 131 |  | 
|  | 132 | return 0; | 
|  | 133 |  | 
|  | 134 | exit_remove: | 
|  | 135 | sysfs_remove_group(&client->dev.kobj, &lm73_group); | 
|  | 136 | return status; | 
|  | 137 | } | 
|  | 138 |  | 
|  | 139 | static int lm73_remove(struct i2c_client *client) | 
|  | 140 | { | 
|  | 141 | struct device *hwmon_dev = i2c_get_clientdata(client); | 
|  | 142 |  | 
|  | 143 | hwmon_device_unregister(hwmon_dev); | 
|  | 144 | sysfs_remove_group(&client->dev.kobj, &lm73_group); | 
|  | 145 | return 0; | 
|  | 146 | } | 
|  | 147 |  | 
|  | 148 | static const struct i2c_device_id lm73_ids[] = { | 
|  | 149 | { "lm73", 0 }, | 
|  | 150 | { /* LIST END */ } | 
|  | 151 | }; | 
|  | 152 | MODULE_DEVICE_TABLE(i2c, lm73_ids); | 
|  | 153 |  | 
|  | 154 | /* Return 0 if detection is successful, -ENODEV otherwise */ | 
|  | 155 | static int lm73_detect(struct i2c_client *new_client, | 
|  | 156 | struct i2c_board_info *info) | 
|  | 157 | { | 
|  | 158 | struct i2c_adapter *adapter = new_client->adapter; | 
|  | 159 | int id, ctrl, conf; | 
|  | 160 |  | 
|  | 161 | if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA | | 
|  | 162 | I2C_FUNC_SMBUS_WORD_DATA)) | 
|  | 163 | return -ENODEV; | 
|  | 164 |  | 
|  | 165 | /* | 
|  | 166 | * Do as much detection as possible with byte reads first, as word | 
|  | 167 | * reads can confuse other devices. | 
|  | 168 | */ | 
|  | 169 | ctrl = i2c_smbus_read_byte_data(new_client, LM73_REG_CTRL); | 
|  | 170 | if (ctrl < 0 || (ctrl & 0x10)) | 
|  | 171 | return -ENODEV; | 
|  | 172 |  | 
|  | 173 | conf = i2c_smbus_read_byte_data(new_client, LM73_REG_CONF); | 
|  | 174 | if (conf < 0 || (conf & 0x0c)) | 
|  | 175 | return -ENODEV; | 
|  | 176 |  | 
|  | 177 | id = i2c_smbus_read_byte_data(new_client, LM73_REG_ID); | 
|  | 178 | if (id < 0 || id != (LM73_ID & 0xff)) | 
|  | 179 | return -ENODEV; | 
|  | 180 |  | 
|  | 181 | /* Check device ID */ | 
|  | 182 | id = i2c_smbus_read_word_data(new_client, LM73_REG_ID); | 
|  | 183 | if (id < 0 || id != LM73_ID) | 
|  | 184 | return -ENODEV; | 
|  | 185 |  | 
|  | 186 | strlcpy(info->type, "lm73", I2C_NAME_SIZE); | 
|  | 187 |  | 
|  | 188 | return 0; | 
|  | 189 | } | 
|  | 190 |  | 
|  | 191 | static struct i2c_driver lm73_driver = { | 
|  | 192 | .class		= I2C_CLASS_HWMON, | 
|  | 193 | .driver = { | 
|  | 194 | .name	= "lm73", | 
|  | 195 | }, | 
|  | 196 | .probe		= lm73_probe, | 
|  | 197 | .remove		= lm73_remove, | 
|  | 198 | .id_table	= lm73_ids, | 
|  | 199 | .detect		= lm73_detect, | 
|  | 200 | .address_list	= normal_i2c, | 
|  | 201 | }; | 
|  | 202 |  | 
|  | 203 | module_i2c_driver(lm73_driver); | 
|  | 204 |  | 
|  | 205 | MODULE_AUTHOR("Guillaume Ligneul <guillaume.ligneul@gmail.com>"); | 
|  | 206 | MODULE_DESCRIPTION("LM73 driver"); | 
|  | 207 | MODULE_LICENSE("GPL"); |