ap/lib/libcurl/curl-7.86.0/m4/curl-openssl.m4

#***************************************************************************
#                                  _   _ ____  _
#  Project                     ___| | | |  _ \| |
#                             / __| | | | |_) | |
#                            | (__| |_| |  _ <| |___
#                             \___|\___/|_| \_\_____|
#
# Copyright (C) 1998 - 2022, Daniel Stenberg, <daniel@haxx.se>, et al.
#
# This software is licensed as described in the file COPYING, which
# you should have received as part of this distribution. The terms
# are also available at https://curl.se/docs/copyright.html.
#
# You may opt to use, copy, modify, merge, publish, distribute and/or sell
# copies of the Software, and permit persons to whom the Software is
# furnished to do so, under the terms of the COPYING file.
#
# This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
# KIND, either express or implied.
#
# SPDX-License-Identifier: curl
#
#***************************************************************************

# File version for 'aclocal' use. Keep it a single number.
# serial 5

dnl **********************************************************************
dnl Check for OpenSSL libraries and headers
dnl **********************************************************************

AC_DEFUN([CURL_WITH_OPENSSL], [
if test "x$OPT_OPENSSL" != xno; then
  ssl_msg=

  dnl backup the pre-ssl variables
  CLEANLDFLAGS="$LDFLAGS"
  CLEANCPPFLAGS="$CPPFLAGS"
  CLEANLIBS="$LIBS"

  dnl This is for Msys/Mingw
  case $host in
    *-*-msys* | *-*-mingw*)
      AC_MSG_CHECKING([for gdi32])
      my_ac_save_LIBS=$LIBS
      LIBS="-lgdi32 $LIBS"
      AC_LINK_IFELSE([ AC_LANG_PROGRAM([[
        #include <windef.h>
        #include <wingdi.h>
        ]],
        [[
          GdiFlush();
        ]])],
        [ dnl worked!
        AC_MSG_RESULT([yes])],
        [ dnl failed, restore LIBS
        LIBS=$my_ac_save_LIBS
        AC_MSG_RESULT(no)]
        )
      ;;
  esac

  case "$OPT_OPENSSL" in
  yes)
    dnl --with-openssl (without path) used
    PKGTEST="yes"
    PREFIX_OPENSSL=
    ;;
  *)
    dnl check the given --with-openssl spot
    PKGTEST="no"
    PREFIX_OPENSSL=$OPT_OPENSSL

    dnl Try pkg-config even when cross-compiling.  Since we
    dnl specify PKG_CONFIG_LIBDIR we're only looking where
    dnl the user told us to look
    OPENSSL_PCDIR="$OPT_OPENSSL/lib/pkgconfig"
    if test -f "$OPENSSL_PCDIR/openssl.pc"; then
      AC_MSG_NOTICE([PKG_CONFIG_LIBDIR will be set to "$OPENSSL_PCDIR"])
      PKGTEST="yes"
    fi

    if test "$PKGTEST" != "yes"; then
      # try lib64 instead
      OPENSSL_PCDIR="$OPT_OPENSSL/lib64/pkgconfig"
      if test -f "$OPENSSL_PCDIR/openssl.pc"; then
        AC_MSG_NOTICE([PKG_CONFIG_LIBDIR will be set to "$OPENSSL_PCDIR"])
        PKGTEST="yes"
      fi
    fi

    if test "$PKGTEST" != "yes"; then
      if test ! -f "$PREFIX_OPENSSL/include/openssl/ssl.h"; then
        AC_MSG_ERROR([$PREFIX_OPENSSL is a bad --with-openssl prefix!])
      fi
    fi

    dnl in case pkg-config comes up empty, use what we got
    dnl via --with-openssl
    LIB_OPENSSL="$PREFIX_OPENSSL/lib$libsuff"
    if test "$PREFIX_OPENSSL" != "/usr" ; then
      SSL_LDFLAGS="-L$LIB_OPENSSL"
      SSL_CPPFLAGS="-I$PREFIX_OPENSSL/include"
    fi
    SSL_CPPFLAGS="$SSL_CPPFLAGS -I$PREFIX_OPENSSL/include/openssl"
    ;;
  esac

  if test "$PKGTEST" = "yes"; then

    CURL_CHECK_PKGCONFIG(openssl, [$OPENSSL_PCDIR])

    if test "$PKGCONFIG" != "no" ; then
      SSL_LIBS=`CURL_EXPORT_PCDIR([$OPENSSL_PCDIR]) dnl
        $PKGCONFIG --libs-only-l --libs-only-other openssl 2>/dev/null`

      SSL_LDFLAGS=`CURL_EXPORT_PCDIR([$OPENSSL_PCDIR]) dnl
        $PKGCONFIG --libs-only-L openssl 2>/dev/null`

      SSL_CPPFLAGS=`CURL_EXPORT_PCDIR([$OPENSSL_PCDIR]) dnl
        $PKGCONFIG --cflags-only-I openssl 2>/dev/null`

      AC_SUBST(SSL_LIBS)
      AC_MSG_NOTICE([pkg-config: SSL_LIBS: "$SSL_LIBS"])
      AC_MSG_NOTICE([pkg-config: SSL_LDFLAGS: "$SSL_LDFLAGS"])
      AC_MSG_NOTICE([pkg-config: SSL_CPPFLAGS: "$SSL_CPPFLAGS"])

      LIB_OPENSSL=`echo $SSL_LDFLAGS | sed -e 's/^-L//'`

      dnl use the values pkg-config reported.  This is here
      dnl instead of below with CPPFLAGS and LDFLAGS because we only
      dnl learn about this via pkg-config.  If we only have
      dnl the argument to --with-openssl we don't know what
      dnl additional libs may be necessary.  Hope that we
      dnl don't need any.
      LIBS="$SSL_LIBS $LIBS"
    fi
  fi

  dnl finally, set flags to use SSL
  CPPFLAGS="$CPPFLAGS $SSL_CPPFLAGS"
  LDFLAGS="$LDFLAGS $SSL_LDFLAGS"

  AC_CHECK_LIB(crypto, HMAC_Update,[
     HAVECRYPTO="yes"
     LIBS="-lcrypto $LIBS"
     ],[
     if test -n "$LIB_OPENSSL" ; then
       LDFLAGS="$CLEANLDFLAGS -L$LIB_OPENSSL"
     fi
     if test "$PKGCONFIG" = "no" -a -n "$PREFIX_OPENSSL" ; then
       # only set this if pkg-config wasn't used
       CPPFLAGS="$CLEANCPPFLAGS -I$PREFIX_OPENSSL/include/openssl -I$PREFIX_OPENSSL/include"
     fi
     # Linking previously failed, try extra paths from --with-openssl or
     # pkg-config.  Use a different function name to avoid reusing the earlier
     # cached result.
     AC_CHECK_LIB(crypto, HMAC_Init_ex,[
       HAVECRYPTO="yes"
       LIBS="-lcrypto $LIBS"], [

       dnl still no, but what about with -ldl?
       AC_MSG_CHECKING([OpenSSL linking with -ldl])
       LIBS="-lcrypto $CLEANLIBS -ldl"
       AC_LINK_IFELSE([ AC_LANG_PROGRAM([[
         #include <openssl/err.h>
       ]], [[
         ERR_clear_error();
       ]]) ],
       [
         AC_MSG_RESULT(yes)
         HAVECRYPTO="yes"
       ],
       [
         AC_MSG_RESULT(no)
         dnl ok, so what about both -ldl and -lpthread?
         dnl This may be necessary for static libraries.

         AC_MSG_CHECKING([OpenSSL linking with -ldl and -lpthread])
         LIBS="-lcrypto $CLEANLIBS -ldl -lpthread"
         AC_LINK_IFELSE([
           AC_LANG_PROGRAM([[
           #include <openssl/err.h>
         ]], [[
           ERR_clear_error();
         ]])],
         [
           AC_MSG_RESULT(yes)
           HAVECRYPTO="yes"
         ],
         [
           AC_MSG_RESULT(no)
           LDFLAGS="$CLEANLDFLAGS"
           CPPFLAGS="$CLEANCPPFLAGS"
           LIBS="$CLEANLIBS"

         ])

       ])

     ])
  ])

  if test X"$HAVECRYPTO" = X"yes"; then
    dnl This is only reasonable to do if crypto actually is there: check for
    dnl SSL libs NOTE: it is important to do this AFTER the crypto lib

    AC_CHECK_LIB(ssl, SSL_connect)

    if test "$ac_cv_lib_ssl_SSL_connect" != yes; then
        dnl we didn't find the SSL lib, try the RSAglue/rsaref stuff
        AC_MSG_CHECKING(for ssl with RSAglue/rsaref libs in use);
        OLIBS=$LIBS
        LIBS="-lRSAglue -lrsaref $LIBS"
        AC_CHECK_LIB(ssl, SSL_connect)
        if test "$ac_cv_lib_ssl_SSL_connect" != yes; then
            dnl still no SSL_connect
            AC_MSG_RESULT(no)
            LIBS=$OLIBS
        else
            AC_MSG_RESULT(yes)
        fi

    else

      dnl Have the libraries--check for OpenSSL headers
      AC_CHECK_HEADERS(openssl/x509.h openssl/rsa.h openssl/crypto.h \
                       openssl/pem.h openssl/ssl.h openssl/err.h,
        ssl_msg="OpenSSL"
	test openssl != "$DEFAULT_SSL_BACKEND" || VALID_DEFAULT_SSL_BACKEND=yes
        OPENSSL_ENABLED=1
        AC_DEFINE(USE_OPENSSL, 1, [if OpenSSL is in use]))

      if test $ac_cv_header_openssl_x509_h = no; then
        dnl we don't use the "action" part of the AC_CHECK_HEADERS macro
        dnl since 'err.h' might in fact find a krb4 header with the same
        dnl name
        AC_CHECK_HEADERS(x509.h rsa.h crypto.h pem.h ssl.h err.h)

        if test $ac_cv_header_x509_h = yes &&
           test $ac_cv_header_crypto_h = yes &&
           test $ac_cv_header_ssl_h = yes; then
          dnl three matches
          ssl_msg="OpenSSL"
          OPENSSL_ENABLED=1
        fi
      fi
    fi

    if test X"$OPENSSL_ENABLED" != X"1"; then
       LIBS="$CLEANLIBS"
    fi

    if test X"$OPT_OPENSSL" != Xoff &&
       test "$OPENSSL_ENABLED" != "1"; then
      AC_MSG_ERROR([OpenSSL libs and/or directories were not found where specified!])
    fi
  fi

  if test X"$OPENSSL_ENABLED" = X"1"; then
    dnl These can only exist if OpenSSL exists

    AC_CHECK_FUNCS( RAND_egd )

    AC_MSG_CHECKING([for BoringSSL])
    AC_COMPILE_IFELSE([
        AC_LANG_PROGRAM([[
                #include <openssl/base.h>
                ]],[[
                #ifndef OPENSSL_IS_BORINGSSL
                #error not boringssl
                #endif
       ]])
    ],[
        AC_MSG_RESULT([yes])
        AC_DEFINE_UNQUOTED(HAVE_BORINGSSL, 1,
                           [Define to 1 if using BoringSSL.])
        ssl_msg="BoringSSL"
    ],[
        AC_MSG_RESULT([no])
    ])

    AC_MSG_CHECKING([for libressl])
    AC_COMPILE_IFELSE([
      AC_LANG_PROGRAM([[
#include <openssl/opensslv.h>
      ]],[[
        int dummy = LIBRESSL_VERSION_NUMBER;
      ]])
    ],[
      AC_MSG_RESULT([yes])
      AC_DEFINE_UNQUOTED(HAVE_LIBRESSL, 1,
        [Define to 1 if using libressl.])
      ssl_msg="libressl"
    ],[
      AC_MSG_RESULT([no])
    ])

    AC_MSG_CHECKING([for OpenSSL >= v3])
    AC_COMPILE_IFELSE([
      AC_LANG_PROGRAM([[
#include <openssl/opensslv.h>
      ]],[[
        #if defined(OPENSSL_VERSION_MAJOR) && (OPENSSL_VERSION_MAJOR >= 3)
        return 0;
        #else
        #error older than 3
        #endif
      ]])
    ],[
      AC_MSG_RESULT([yes])
      AC_DEFINE_UNQUOTED(HAVE_OPENSSL3, 1,
        [Define to 1 if using OpenSSL 3 or later.])
      dnl OpenSSLv3 marks the DES functions deprecated but we have no
      dnl replacements (yet) so tell the compiler to not warn for them
      dnl
      dnl Ask OpenSSL to suppress the warnings.
      CPPFLAGS="$CPPFLAGS -DOPENSSL_SUPPRESS_DEPRECATED"
      ssl_msg="OpenSSL v3+"
    ],[
      AC_MSG_RESULT([no])
    ])
  fi

  if test "$OPENSSL_ENABLED" = "1"; then
    if test -n "$LIB_OPENSSL"; then
       dnl when the ssl shared libs were found in a path that the run-time
       dnl linker doesn't search through, we need to add it to CURL_LIBRARY_PATH
       dnl to prevent further configure tests to fail due to this
       if test "x$cross_compiling" != "xyes"; then
         CURL_LIBRARY_PATH="$CURL_LIBRARY_PATH:$LIB_OPENSSL"
         export CURL_LIBRARY_PATH
         AC_MSG_NOTICE([Added $LIB_OPENSSL to CURL_LIBRARY_PATH])
       fi
    fi
    check_for_ca_bundle=1
  fi

  test -z "$ssl_msg" || ssl_backends="${ssl_backends:+$ssl_backends, }$ssl_msg"
fi

if test X"$OPT_OPENSSL" != Xno &&
  test "$OPENSSL_ENABLED" != "1"; then
  AC_MSG_NOTICE([OPT_OPENSSL: $OPT_OPENSSL])
  AC_MSG_NOTICE([OPENSSL_ENABLED: $OPENSSL_ENABLED])
  AC_MSG_ERROR([--with-openssl was given but OpenSSL could not be detected])
fi

dnl **********************************************************************
dnl Check for the random seed preferences
dnl **********************************************************************

if test X"$OPENSSL_ENABLED" = X"1"; then
  AC_ARG_WITH(egd-socket,
  AS_HELP_STRING([--with-egd-socket=FILE],
                 [Entropy Gathering Daemon socket pathname]),
      [ EGD_SOCKET="$withval" ]
  )
  if test -n "$EGD_SOCKET" ; then
          AC_DEFINE_UNQUOTED(EGD_SOCKET, "$EGD_SOCKET",
          [your Entropy Gathering Daemon socket pathname] )
  fi

  dnl Check for user-specified random device
  AC_ARG_WITH(random,
  AS_HELP_STRING([--with-random=FILE],
                 [read randomness from FILE (default=/dev/urandom)]),
      [ RANDOM_FILE="$withval" ],
      [
          if test x$cross_compiling != xyes; then
            dnl Check for random device
            AC_CHECK_FILE("/dev/urandom", [ RANDOM_FILE="/dev/urandom"] )
          else
            AC_MSG_WARN([skipped the /dev/urandom detection when cross-compiling])
          fi
      ]
  )
  if test -n "$RANDOM_FILE" && test X"$RANDOM_FILE" != Xno ; then
          AC_SUBST(RANDOM_FILE)
          AC_DEFINE_UNQUOTED(RANDOM_FILE, "$RANDOM_FILE",
          [a suitable file to read random data from])
  fi
fi

dnl ---
dnl We require OpenSSL with SRP support.
dnl ---
if test "$OPENSSL_ENABLED" = "1"; then
  AC_MSG_CHECKING([for SRP support in OpenSSL])
  AC_LINK_IFELSE([
    AC_LANG_PROGRAM([[
#include <openssl/ssl.h>
    ]],[[
      SSL_CTX_set_srp_username(NULL, "");
      SSL_CTX_set_srp_password(NULL, "");
    ]])
  ],[
    AC_MSG_RESULT([yes])
    AC_DEFINE(HAVE_OPENSSL_SRP, 1, [if you have the functions SSL_CTX_set_srp_username and SSL_CTX_set_srp_password])
    AC_SUBST(HAVE_OPENSSL_SRP, [1])
  ],[
    AC_MSG_RESULT([no])
  ])
fi

dnl ---
dnl Whether the OpenSSL configuration will be loaded automatically
dnl ---
if test X"$OPENSSL_ENABLED" = X"1"; then
AC_ARG_ENABLE(openssl-auto-load-config,
AS_HELP_STRING([--enable-openssl-auto-load-config],[Enable automatic loading of OpenSSL configuration])
AS_HELP_STRING([--disable-openssl-auto-load-config],[Disable automatic loading of OpenSSL configuration]),
[ if test X"$enableval" = X"no"; then
    AC_MSG_NOTICE([automatic loading of OpenSSL configuration disabled])
    AC_DEFINE(CURL_DISABLE_OPENSSL_AUTO_LOAD_CONFIG, 1, [if the OpenSSL configuration won't be loaded automatically])
  fi
])
fi

])