xf.li | 6c8fc1e | 2023-08-12 00:11:09 -0700 | [diff] [blame^] | 1 | # Makefile.in generated by automake 1.16.5 from Makefile.am. |
| 2 | # @configure_input@ |
| 3 | |
| 4 | # Copyright (C) 1994-2021 Free Software Foundation, Inc. |
| 5 | |
| 6 | # This Makefile.in is free software; the Free Software Foundation |
| 7 | # gives unlimited permission to copy and/or distribute it, |
| 8 | # with or without modifications, as long as this notice is preserved. |
| 9 | |
| 10 | # This program is distributed in the hope that it will be useful, |
| 11 | # but WITHOUT ANY WARRANTY, to the extent permitted by law; without |
| 12 | # even the implied warranty of MERCHANTABILITY or FITNESS FOR A |
| 13 | # PARTICULAR PURPOSE. |
| 14 | |
| 15 | @SET_MAKE@ |
| 16 | |
| 17 | #*************************************************************************** |
| 18 | # _ _ ____ _ |
| 19 | # Project ___| | | | _ \| | |
| 20 | # / __| | | | |_) | | |
| 21 | # | (__| |_| | _ <| |___ |
| 22 | # \___|\___/|_| \_\_____| |
| 23 | # |
| 24 | # Copyright (C) 1998 - 2022, Daniel Stenberg, <daniel@haxx.se>, et al. |
| 25 | # |
| 26 | # This software is licensed as described in the file COPYING, which |
| 27 | # you should have received as part of this distribution. The terms |
| 28 | # are also available at https://curl.se/docs/copyright.html. |
| 29 | # |
| 30 | # You may opt to use, copy, modify, merge, publish, distribute and/or sell |
| 31 | # copies of the Software, and permit persons to whom the Software is |
| 32 | # furnished to do so, under the terms of the COPYING file. |
| 33 | # |
| 34 | # This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY |
| 35 | # KIND, either express or implied. |
| 36 | # |
| 37 | # SPDX-License-Identifier: curl |
| 38 | # |
| 39 | ########################################################################### |
| 40 | |
| 41 | #*************************************************************************** |
| 42 | # _ _ ____ _ |
| 43 | # Project ___| | | | _ \| | |
| 44 | # / __| | | | |_) | | |
| 45 | # | (__| |_| | _ <| |___ |
| 46 | # \___|\___/|_| \_\_____| |
| 47 | # |
| 48 | # Copyright (C) 1998 - 2022, Daniel Stenberg, <daniel@haxx.se>, et al. |
| 49 | # |
| 50 | # This software is licensed as described in the file COPYING, which |
| 51 | # you should have received as part of this distribution. The terms |
| 52 | # are also available at https://curl.se/docs/copyright.html. |
| 53 | # |
| 54 | # You may opt to use, copy, modify, merge, publish, distribute and/or sell |
| 55 | # copies of the Software, and permit persons to whom the Software is |
| 56 | # furnished to do so, under the terms of the COPYING file. |
| 57 | # |
| 58 | # This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY |
| 59 | # KIND, either express or implied. |
| 60 | # |
| 61 | # SPDX-License-Identifier: curl |
| 62 | # |
| 63 | ########################################################################### |
| 64 | |
| 65 | #*************************************************************************** |
| 66 | # _ _ ____ _ |
| 67 | # Project ___| | | | _ \| | |
| 68 | # / __| | | | |_) | | |
| 69 | # | (__| |_| | _ <| |___ |
| 70 | # \___|\___/|_| \_\_____| |
| 71 | # |
| 72 | # Copyright (C) 1998 - 2022, Daniel Stenberg, <daniel@haxx.se>, et al. |
| 73 | # |
| 74 | # This software is licensed as described in the file COPYING, which |
| 75 | # you should have received as part of this distribution. The terms |
| 76 | # are also available at https://curl.se/docs/copyright.html. |
| 77 | # |
| 78 | # You may opt to use, copy, modify, merge, publish, distribute and/or sell |
| 79 | # copies of the Software, and permit persons to whom the Software is |
| 80 | # furnished to do so, under the terms of the COPYING file. |
| 81 | # |
| 82 | # This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY |
| 83 | # KIND, either express or implied. |
| 84 | # |
| 85 | # SPDX-License-Identifier: curl |
| 86 | # |
| 87 | ########################################################################### |
| 88 | # ./src/Makefile.inc |
| 89 | # Using the backslash as line continuation character might be problematic with |
| 90 | # some make flavours. If we ever want to change this in a portable manner then |
| 91 | # we should consider this idea : |
| 92 | # CSRC1 = file1.c file2.c file3.c |
| 93 | # CSRC2 = file4.c file5.c file6.c |
| 94 | # CSOURCES = $(CSRC1) $(CSRC2) |
| 95 | |
| 96 | |
| 97 | VPATH = @srcdir@ |
| 98 | am__is_gnu_make = { \ |
| 99 | if test -z '$(MAKELEVEL)'; then \ |
| 100 | false; \ |
| 101 | elif test -n '$(MAKE_HOST)'; then \ |
| 102 | true; \ |
| 103 | elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ |
| 104 | true; \ |
| 105 | else \ |
| 106 | false; \ |
| 107 | fi; \ |
| 108 | } |
| 109 | am__make_running_with_option = \ |
| 110 | case $${target_option-} in \ |
| 111 | ?) ;; \ |
| 112 | *) echo "am__make_running_with_option: internal error: invalid" \ |
| 113 | "target option '$${target_option-}' specified" >&2; \ |
| 114 | exit 1;; \ |
| 115 | esac; \ |
| 116 | has_opt=no; \ |
| 117 | sane_makeflags=$$MAKEFLAGS; \ |
| 118 | if $(am__is_gnu_make); then \ |
| 119 | sane_makeflags=$$MFLAGS; \ |
| 120 | else \ |
| 121 | case $$MAKEFLAGS in \ |
| 122 | *\\[\ \ ]*) \ |
| 123 | bs=\\; \ |
| 124 | sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ |
| 125 | | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ |
| 126 | esac; \ |
| 127 | fi; \ |
| 128 | skip_next=no; \ |
| 129 | strip_trailopt () \ |
| 130 | { \ |
| 131 | flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ |
| 132 | }; \ |
| 133 | for flg in $$sane_makeflags; do \ |
| 134 | test $$skip_next = yes && { skip_next=no; continue; }; \ |
| 135 | case $$flg in \ |
| 136 | *=*|--*) continue;; \ |
| 137 | -*I) strip_trailopt 'I'; skip_next=yes;; \ |
| 138 | -*I?*) strip_trailopt 'I';; \ |
| 139 | -*O) strip_trailopt 'O'; skip_next=yes;; \ |
| 140 | -*O?*) strip_trailopt 'O';; \ |
| 141 | -*l) strip_trailopt 'l'; skip_next=yes;; \ |
| 142 | -*l?*) strip_trailopt 'l';; \ |
| 143 | -[dEDm]) skip_next=yes;; \ |
| 144 | -[JT]) skip_next=yes;; \ |
| 145 | esac; \ |
| 146 | case $$flg in \ |
| 147 | *$$target_option*) has_opt=yes; break;; \ |
| 148 | esac; \ |
| 149 | done; \ |
| 150 | test $$has_opt = yes |
| 151 | am__make_dryrun = (target_option=n; $(am__make_running_with_option)) |
| 152 | am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) |
| 153 | pkgdatadir = $(datadir)/@PACKAGE@ |
| 154 | pkgincludedir = $(includedir)/@PACKAGE@ |
| 155 | pkglibdir = $(libdir)/@PACKAGE@ |
| 156 | pkglibexecdir = $(libexecdir)/@PACKAGE@ |
| 157 | am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd |
| 158 | install_sh_DATA = $(install_sh) -c -m 644 |
| 159 | install_sh_PROGRAM = $(install_sh) -c |
| 160 | install_sh_SCRIPT = $(install_sh) -c |
| 161 | INSTALL_HEADER = $(INSTALL_DATA) |
| 162 | transform = $(program_transform_name) |
| 163 | NORMAL_INSTALL = : |
| 164 | PRE_INSTALL = : |
| 165 | POST_INSTALL = : |
| 166 | NORMAL_UNINSTALL = : |
| 167 | PRE_UNINSTALL = : |
| 168 | POST_UNINSTALL = : |
| 169 | build_triplet = @build@ |
| 170 | host_triplet = @host@ |
| 171 | subdir = . |
| 172 | ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 |
| 173 | am__aclocal_m4_deps = $(top_srcdir)/m4/curl-amissl.m4 \ |
| 174 | $(top_srcdir)/m4/curl-bearssl.m4 \ |
| 175 | $(top_srcdir)/m4/curl-compilers.m4 \ |
| 176 | $(top_srcdir)/m4/curl-confopts.m4 \ |
| 177 | $(top_srcdir)/m4/curl-functions.m4 \ |
| 178 | $(top_srcdir)/m4/curl-gnutls.m4 \ |
| 179 | $(top_srcdir)/m4/curl-mbedtls.m4 $(top_srcdir)/m4/curl-nss.m4 \ |
| 180 | $(top_srcdir)/m4/curl-openssl.m4 \ |
| 181 | $(top_srcdir)/m4/curl-override.m4 \ |
| 182 | $(top_srcdir)/m4/curl-reentrant.m4 \ |
| 183 | $(top_srcdir)/m4/curl-rustls.m4 \ |
| 184 | $(top_srcdir)/m4/curl-schannel.m4 \ |
| 185 | $(top_srcdir)/m4/curl-sectransp.m4 \ |
| 186 | $(top_srcdir)/m4/curl-sysconfig.m4 \ |
| 187 | $(top_srcdir)/m4/curl-wolfssl.m4 $(top_srcdir)/m4/libtool.m4 \ |
| 188 | $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ |
| 189 | $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ |
| 190 | $(top_srcdir)/m4/xc-am-iface.m4 \ |
| 191 | $(top_srcdir)/m4/xc-cc-check.m4 \ |
| 192 | $(top_srcdir)/m4/xc-lt-iface.m4 \ |
| 193 | $(top_srcdir)/m4/xc-translit.m4 \ |
| 194 | $(top_srcdir)/m4/xc-val-flgs.m4 \ |
| 195 | $(top_srcdir)/m4/zz40-xc-ovr.m4 \ |
| 196 | $(top_srcdir)/m4/zz50-xc-ovr.m4 \ |
| 197 | $(top_srcdir)/m4/zz60-xc-ovr.m4 $(top_srcdir)/acinclude.m4 \ |
| 198 | $(top_srcdir)/configure.ac |
| 199 | am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ |
| 200 | $(ACLOCAL_M4) |
| 201 | DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \ |
| 202 | $(am__configure_deps) $(am__DIST_COMMON) |
| 203 | am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ |
| 204 | configure.lineno config.status.lineno |
| 205 | mkinstalldirs = $(install_sh) -d |
| 206 | CONFIG_HEADER = $(top_builddir)/lib/curl_config.h |
| 207 | CONFIG_CLEAN_FILES = curl-config libcurl.pc |
| 208 | CONFIG_CLEAN_VPATH_FILES = |
| 209 | am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; |
| 210 | am__vpath_adj = case $$p in \ |
| 211 | $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ |
| 212 | *) f=$$p;; \ |
| 213 | esac; |
| 214 | am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; |
| 215 | am__install_max = 40 |
| 216 | am__nobase_strip_setup = \ |
| 217 | srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` |
| 218 | am__nobase_strip = \ |
| 219 | for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" |
| 220 | am__nobase_list = $(am__nobase_strip_setup); \ |
| 221 | for p in $$list; do echo "$$p $$p"; done | \ |
| 222 | sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ |
| 223 | $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ |
| 224 | if (++n[$$2] == $(am__install_max)) \ |
| 225 | { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ |
| 226 | END { for (dir in files) print dir, files[dir] }' |
| 227 | am__base_list = \ |
| 228 | sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ |
| 229 | sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' |
| 230 | am__uninstall_files_from_dir = { \ |
| 231 | test -z "$$files" \ |
| 232 | || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ |
| 233 | || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ |
| 234 | $(am__cd) "$$dir" && rm -f $$files; }; \ |
| 235 | } |
| 236 | am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(pkgconfigdir)" |
| 237 | SCRIPTS = $(bin_SCRIPTS) |
| 238 | AM_V_P = $(am__v_P_@AM_V@) |
| 239 | am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) |
| 240 | am__v_P_0 = false |
| 241 | am__v_P_1 = : |
| 242 | AM_V_GEN = $(am__v_GEN_@AM_V@) |
| 243 | am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) |
| 244 | am__v_GEN_0 = @echo " GEN " $@; |
| 245 | am__v_GEN_1 = |
| 246 | AM_V_at = $(am__v_at_@AM_V@) |
| 247 | am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) |
| 248 | am__v_at_0 = @ |
| 249 | am__v_at_1 = |
| 250 | SOURCES = |
| 251 | DIST_SOURCES = |
| 252 | RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ |
| 253 | ctags-recursive dvi-recursive html-recursive info-recursive \ |
| 254 | install-data-recursive install-dvi-recursive \ |
| 255 | install-exec-recursive install-html-recursive \ |
| 256 | install-info-recursive install-pdf-recursive \ |
| 257 | install-ps-recursive install-recursive installcheck-recursive \ |
| 258 | installdirs-recursive pdf-recursive ps-recursive \ |
| 259 | tags-recursive uninstall-recursive |
| 260 | am__can_run_installinfo = \ |
| 261 | case $$AM_UPDATE_INFO_DIR in \ |
| 262 | n|no|NO) false;; \ |
| 263 | *) (install-info --version) >/dev/null 2>&1;; \ |
| 264 | esac |
| 265 | DATA = $(pkgconfig_DATA) |
| 266 | RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ |
| 267 | distclean-recursive maintainer-clean-recursive |
| 268 | am__recursive_targets = \ |
| 269 | $(RECURSIVE_TARGETS) \ |
| 270 | $(RECURSIVE_CLEAN_TARGETS) \ |
| 271 | $(am__extra_recursive_targets) |
| 272 | AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ |
| 273 | cscope distdir distdir-am dist dist-all distcheck |
| 274 | am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) |
| 275 | # Read a list of newline-separated strings from the standard input, |
| 276 | # and print each of them once, without duplicates. Input order is |
| 277 | # *not* preserved. |
| 278 | am__uniquify_input = $(AWK) '\ |
| 279 | BEGIN { nonempty = 0; } \ |
| 280 | { items[$$0] = 1; nonempty = 1; } \ |
| 281 | END { if (nonempty) { for (i in items) print i; }; } \ |
| 282 | ' |
| 283 | # Make sure the list of sources is unique. This is necessary because, |
| 284 | # e.g., the same source file might be shared among _SOURCES variables |
| 285 | # for different programs/libraries. |
| 286 | am__define_uniq_tagged_files = \ |
| 287 | list='$(am__tagged_files)'; \ |
| 288 | unique=`for i in $$list; do \ |
| 289 | if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| 290 | done | $(am__uniquify_input)` |
| 291 | am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/curl-config.in \ |
| 292 | $(srcdir)/lib/Makefile.inc $(srcdir)/libcurl.pc.in \ |
| 293 | $(srcdir)/src/Makefile.inc COPYING README compile config.guess \ |
| 294 | config.sub depcomp install-sh ltmain.sh missing |
| 295 | DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) |
| 296 | distdir = $(PACKAGE)-$(VERSION) |
| 297 | top_distdir = $(distdir) |
| 298 | am__remove_distdir = \ |
| 299 | if test -d "$(distdir)"; then \ |
| 300 | find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ |
| 301 | && rm -rf "$(distdir)" \ |
| 302 | || { sleep 5 && rm -rf "$(distdir)"; }; \ |
| 303 | else :; fi |
| 304 | am__post_remove_distdir = $(am__remove_distdir) |
| 305 | am__relativize = \ |
| 306 | dir0=`pwd`; \ |
| 307 | sed_first='s,^\([^/]*\)/.*$$,\1,'; \ |
| 308 | sed_rest='s,^[^/]*/*,,'; \ |
| 309 | sed_last='s,^.*/\([^/]*\)$$,\1,'; \ |
| 310 | sed_butlast='s,/*[^/]*$$,,'; \ |
| 311 | while test -n "$$dir1"; do \ |
| 312 | first=`echo "$$dir1" | sed -e "$$sed_first"`; \ |
| 313 | if test "$$first" != "."; then \ |
| 314 | if test "$$first" = ".."; then \ |
| 315 | dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ |
| 316 | dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ |
| 317 | else \ |
| 318 | first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ |
| 319 | if test "$$first2" = "$$first"; then \ |
| 320 | dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ |
| 321 | else \ |
| 322 | dir2="../$$dir2"; \ |
| 323 | fi; \ |
| 324 | dir0="$$dir0"/"$$first"; \ |
| 325 | fi; \ |
| 326 | fi; \ |
| 327 | dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ |
| 328 | done; \ |
| 329 | reldir="$$dir2" |
| 330 | DIST_ARCHIVES = $(distdir).tar.gz |
| 331 | GZIP_ENV = --best |
| 332 | DIST_TARGETS = dist-gzip |
| 333 | # Exists only to be overridden by the user if desired. |
| 334 | AM_DISTCHECK_DVI_TARGET = dvi |
| 335 | distuninstallcheck_listfiles = find . -type f -print |
| 336 | am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ |
| 337 | | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' |
| 338 | distcleancheck_listfiles = find . -type f -print |
| 339 | ACLOCAL = @ACLOCAL@ |
| 340 | AMTAR = @AMTAR@ |
| 341 | AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ |
| 342 | AR = @AR@ |
| 343 | AR_FLAGS = @AR_FLAGS@ |
| 344 | AS = @AS@ |
| 345 | AUTOCONF = @AUTOCONF@ |
| 346 | AUTOHEADER = @AUTOHEADER@ |
| 347 | AUTOMAKE = @AUTOMAKE@ |
| 348 | AWK = @AWK@ |
| 349 | BLANK_AT_MAKETIME = @BLANK_AT_MAKETIME@ |
| 350 | CC = @CC@ |
| 351 | CCDEPMODE = @CCDEPMODE@ |
| 352 | CFLAGS = @CFLAGS@ |
| 353 | CFLAG_CURL_SYMBOL_HIDING = @CFLAG_CURL_SYMBOL_HIDING@ |
| 354 | CONFIGURE_OPTIONS = @CONFIGURE_OPTIONS@ |
| 355 | CPP = @CPP@ |
| 356 | CPPFLAGS = @CPPFLAGS@ |
| 357 | CPPFLAG_CURL_STATICLIB = @CPPFLAG_CURL_STATICLIB@ |
| 358 | CSCOPE = @CSCOPE@ |
| 359 | CTAGS = @CTAGS@ |
| 360 | CURLVERSION = @CURLVERSION@ |
| 361 | CURL_CA_BUNDLE = @CURL_CA_BUNDLE@ |
| 362 | CURL_CFLAG_EXTRAS = @CURL_CFLAG_EXTRAS@ |
| 363 | CURL_DISABLE_DICT = @CURL_DISABLE_DICT@ |
| 364 | CURL_DISABLE_FILE = @CURL_DISABLE_FILE@ |
| 365 | CURL_DISABLE_FTP = @CURL_DISABLE_FTP@ |
| 366 | CURL_DISABLE_GOPHER = @CURL_DISABLE_GOPHER@ |
| 367 | CURL_DISABLE_HTTP = @CURL_DISABLE_HTTP@ |
| 368 | CURL_DISABLE_IMAP = @CURL_DISABLE_IMAP@ |
| 369 | CURL_DISABLE_LDAP = @CURL_DISABLE_LDAP@ |
| 370 | CURL_DISABLE_LDAPS = @CURL_DISABLE_LDAPS@ |
| 371 | CURL_DISABLE_MQTT = @CURL_DISABLE_MQTT@ |
| 372 | CURL_DISABLE_POP3 = @CURL_DISABLE_POP3@ |
| 373 | CURL_DISABLE_PROXY = @CURL_DISABLE_PROXY@ |
| 374 | CURL_DISABLE_RTSP = @CURL_DISABLE_RTSP@ |
| 375 | CURL_DISABLE_SMB = @CURL_DISABLE_SMB@ |
| 376 | CURL_DISABLE_SMTP = @CURL_DISABLE_SMTP@ |
| 377 | CURL_DISABLE_TELNET = @CURL_DISABLE_TELNET@ |
| 378 | CURL_DISABLE_TFTP = @CURL_DISABLE_TFTP@ |
| 379 | CURL_LT_SHLIB_VERSIONED_FLAVOUR = @CURL_LT_SHLIB_VERSIONED_FLAVOUR@ |
| 380 | CURL_NETWORK_AND_TIME_LIBS = @CURL_NETWORK_AND_TIME_LIBS@ |
| 381 | CURL_NETWORK_LIBS = @CURL_NETWORK_LIBS@ |
| 382 | CURL_PLIST_VERSION = @CURL_PLIST_VERSION@ |
| 383 | CURL_WITH_MULTI_SSL = @CURL_WITH_MULTI_SSL@ |
| 384 | CYGPATH_W = @CYGPATH_W@ |
| 385 | DEFAULT_SSL_BACKEND = @DEFAULT_SSL_BACKEND@ |
| 386 | DEFS = @DEFS@ |
| 387 | DEPDIR = @DEPDIR@ |
| 388 | DLLTOOL = @DLLTOOL@ |
| 389 | DSYMUTIL = @DSYMUTIL@ |
| 390 | DUMPBIN = @DUMPBIN@ |
| 391 | ECHO_C = @ECHO_C@ |
| 392 | ECHO_N = @ECHO_N@ |
| 393 | ECHO_T = @ECHO_T@ |
| 394 | EGREP = @EGREP@ |
| 395 | ENABLE_SHARED = @ENABLE_SHARED@ |
| 396 | ENABLE_STATIC = @ENABLE_STATIC@ |
| 397 | ETAGS = @ETAGS@ |
| 398 | EXEEXT = @EXEEXT@ |
| 399 | FGREP = @FGREP@ |
| 400 | FILECMD = @FILECMD@ |
| 401 | FISH_FUNCTIONS_DIR = @FISH_FUNCTIONS_DIR@ |
| 402 | GCOV = @GCOV@ |
| 403 | GREP = @GREP@ |
| 404 | HAVE_BROTLI = @HAVE_BROTLI@ |
| 405 | HAVE_GNUTLS_SRP = @HAVE_GNUTLS_SRP@ |
| 406 | HAVE_LDAP_SSL = @HAVE_LDAP_SSL@ |
| 407 | HAVE_LIBZ = @HAVE_LIBZ@ |
| 408 | HAVE_OPENSSL_SRP = @HAVE_OPENSSL_SRP@ |
| 409 | HAVE_PROTO_BSDSOCKET_H = @HAVE_PROTO_BSDSOCKET_H@ |
| 410 | HAVE_ZSTD = @HAVE_ZSTD@ |
| 411 | IDN_ENABLED = @IDN_ENABLED@ |
| 412 | INSTALL = @INSTALL@ |
| 413 | INSTALL_DATA = @INSTALL_DATA@ |
| 414 | INSTALL_PROGRAM = @INSTALL_PROGRAM@ |
| 415 | INSTALL_SCRIPT = @INSTALL_SCRIPT@ |
| 416 | INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ |
| 417 | IPV6_ENABLED = @IPV6_ENABLED@ |
| 418 | LCOV = @LCOV@ |
| 419 | LD = @LD@ |
| 420 | LDFLAGS = @LDFLAGS@ |
| 421 | LIBCURL_LIBS = @LIBCURL_LIBS@ |
| 422 | LIBCURL_NO_SHARED = @LIBCURL_NO_SHARED@ |
| 423 | LIBOBJS = @LIBOBJS@ |
| 424 | LIBS = @LIBS@ |
| 425 | LIBTOOL = @LIBTOOL@ |
| 426 | LIPO = @LIPO@ |
| 427 | LN_S = @LN_S@ |
| 428 | LTLIBOBJS = @LTLIBOBJS@ |
| 429 | LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ |
| 430 | MAINT = @MAINT@ |
| 431 | MAKEINFO = @MAKEINFO@ |
| 432 | MANIFEST_TOOL = @MANIFEST_TOOL@ |
| 433 | MANOPT = @MANOPT@ |
| 434 | MKDIR_P = @MKDIR_P@ |
| 435 | NM = @NM@ |
| 436 | NMEDIT = @NMEDIT@ |
| 437 | NROFF = @NROFF@ |
| 438 | NSS_LIBS = @NSS_LIBS@ |
| 439 | OBJDUMP = @OBJDUMP@ |
| 440 | OBJEXT = @OBJEXT@ |
| 441 | OTOOL = @OTOOL@ |
| 442 | OTOOL64 = @OTOOL64@ |
| 443 | PACKAGE = @PACKAGE@ |
| 444 | PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ |
| 445 | PACKAGE_NAME = @PACKAGE_NAME@ |
| 446 | PACKAGE_STRING = @PACKAGE_STRING@ |
| 447 | PACKAGE_TARNAME = @PACKAGE_TARNAME@ |
| 448 | PACKAGE_URL = @PACKAGE_URL@ |
| 449 | PACKAGE_VERSION = @PACKAGE_VERSION@ |
| 450 | PATH_SEPARATOR = @PATH_SEPARATOR@ |
| 451 | PERL = @PERL@ |
| 452 | PKGADD_NAME = @PKGADD_NAME@ |
| 453 | PKGADD_PKG = @PKGADD_PKG@ |
| 454 | PKGADD_VENDOR = @PKGADD_VENDOR@ |
| 455 | PKGCONFIG = @PKGCONFIG@ |
| 456 | RANDOM_FILE = @RANDOM_FILE@ |
| 457 | RANLIB = @RANLIB@ |
| 458 | RC = @RC@ |
| 459 | REQUIRE_LIB_DEPS = @REQUIRE_LIB_DEPS@ |
| 460 | SED = @SED@ |
| 461 | SET_MAKE = @SET_MAKE@ |
| 462 | SHELL = @SHELL@ |
| 463 | SSL_BACKENDS = @SSL_BACKENDS@ |
| 464 | SSL_ENABLED = @SSL_ENABLED@ |
| 465 | SSL_LIBS = @SSL_LIBS@ |
| 466 | STRIP = @STRIP@ |
| 467 | SUPPORT_FEATURES = @SUPPORT_FEATURES@ |
| 468 | SUPPORT_PROTOCOLS = @SUPPORT_PROTOCOLS@ |
| 469 | USE_ARES = @USE_ARES@ |
| 470 | USE_BEARSSL = @USE_BEARSSL@ |
| 471 | USE_GNUTLS = @USE_GNUTLS@ |
| 472 | USE_HYPER = @USE_HYPER@ |
| 473 | USE_LIBRTMP = @USE_LIBRTMP@ |
| 474 | USE_LIBSSH = @USE_LIBSSH@ |
| 475 | USE_LIBSSH2 = @USE_LIBSSH2@ |
| 476 | USE_MBEDTLS = @USE_MBEDTLS@ |
| 477 | USE_MSH3 = @USE_MSH3@ |
| 478 | USE_NGHTTP2 = @USE_NGHTTP2@ |
| 479 | USE_NGHTTP3 = @USE_NGHTTP3@ |
| 480 | USE_NGTCP2 = @USE_NGTCP2@ |
| 481 | USE_NGTCP2_CRYPTO_GNUTLS = @USE_NGTCP2_CRYPTO_GNUTLS@ |
| 482 | USE_NGTCP2_CRYPTO_OPENSSL = @USE_NGTCP2_CRYPTO_OPENSSL@ |
| 483 | USE_NGTCP2_CRYPTO_WOLFSSL = @USE_NGTCP2_CRYPTO_WOLFSSL@ |
| 484 | USE_NSS = @USE_NSS@ |
| 485 | USE_OPENLDAP = @USE_OPENLDAP@ |
| 486 | USE_QUICHE = @USE_QUICHE@ |
| 487 | USE_RUSTLS = @USE_RUSTLS@ |
| 488 | USE_SCHANNEL = @USE_SCHANNEL@ |
| 489 | USE_SECTRANSP = @USE_SECTRANSP@ |
| 490 | USE_UNIX_SOCKETS = @USE_UNIX_SOCKETS@ |
| 491 | USE_WIN32_CRYPTO = @USE_WIN32_CRYPTO@ |
| 492 | USE_WIN32_LARGE_FILES = @USE_WIN32_LARGE_FILES@ |
| 493 | USE_WIN32_SMALL_FILES = @USE_WIN32_SMALL_FILES@ |
| 494 | USE_WINDOWS_SSPI = @USE_WINDOWS_SSPI@ |
| 495 | USE_WOLFSSH = @USE_WOLFSSH@ |
| 496 | USE_WOLFSSL = @USE_WOLFSSL@ |
| 497 | VERSION = @VERSION@ |
| 498 | VERSIONNUM = @VERSIONNUM@ |
| 499 | ZLIB_LIBS = @ZLIB_LIBS@ |
| 500 | ZSH_FUNCTIONS_DIR = @ZSH_FUNCTIONS_DIR@ |
| 501 | abs_builddir = @abs_builddir@ |
| 502 | abs_srcdir = @abs_srcdir@ |
| 503 | abs_top_builddir = @abs_top_builddir@ |
| 504 | abs_top_srcdir = @abs_top_srcdir@ |
| 505 | ac_ct_AR = @ac_ct_AR@ |
| 506 | ac_ct_CC = @ac_ct_CC@ |
| 507 | ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ |
| 508 | am__include = @am__include@ |
| 509 | am__leading_dot = @am__leading_dot@ |
| 510 | am__quote = @am__quote@ |
| 511 | am__tar = @am__tar@ |
| 512 | am__untar = @am__untar@ |
| 513 | bindir = @bindir@ |
| 514 | build = @build@ |
| 515 | build_alias = @build_alias@ |
| 516 | build_cpu = @build_cpu@ |
| 517 | build_os = @build_os@ |
| 518 | build_vendor = @build_vendor@ |
| 519 | builddir = @builddir@ |
| 520 | datadir = @datadir@ |
| 521 | datarootdir = @datarootdir@ |
| 522 | docdir = @docdir@ |
| 523 | dvidir = @dvidir@ |
| 524 | exec_prefix = @exec_prefix@ |
| 525 | host = @host@ |
| 526 | host_alias = @host_alias@ |
| 527 | host_cpu = @host_cpu@ |
| 528 | host_os = @host_os@ |
| 529 | host_vendor = @host_vendor@ |
| 530 | htmldir = @htmldir@ |
| 531 | includedir = @includedir@ |
| 532 | infodir = @infodir@ |
| 533 | install_sh = @install_sh@ |
| 534 | libdir = @libdir@ |
| 535 | libexecdir = @libexecdir@ |
| 536 | libext = @libext@ |
| 537 | localedir = @localedir@ |
| 538 | localstatedir = @localstatedir@ |
| 539 | mandir = @mandir@ |
| 540 | mkdir_p = @mkdir_p@ |
| 541 | oldincludedir = @oldincludedir@ |
| 542 | pdfdir = @pdfdir@ |
| 543 | prefix = @prefix@ |
| 544 | program_transform_name = @program_transform_name@ |
| 545 | psdir = @psdir@ |
| 546 | runstatedir = @runstatedir@ |
| 547 | sbindir = @sbindir@ |
| 548 | sharedstatedir = @sharedstatedir@ |
| 549 | srcdir = @srcdir@ |
| 550 | sysconfdir = @sysconfdir@ |
| 551 | target_alias = @target_alias@ |
| 552 | top_build_prefix = @top_build_prefix@ |
| 553 | top_builddir = @top_builddir@ |
| 554 | top_srcdir = @top_srcdir@ |
| 555 | AUTOMAKE_OPTIONS = foreign |
| 556 | ACLOCAL_AMFLAGS = -I m4 |
| 557 | CMAKE_DIST = \ |
| 558 | CMake/cmake_uninstall.cmake.in \ |
| 559 | CMake/CMakeConfigurableFile.in \ |
| 560 | CMake/curl-config.cmake.in \ |
| 561 | CMake/CurlSymbolHiding.cmake \ |
| 562 | CMake/CurlTests.c \ |
| 563 | CMake/FindBearSSL.cmake \ |
| 564 | CMake/FindBrotli.cmake \ |
| 565 | CMake/FindCARES.cmake \ |
| 566 | CMake/FindGSS.cmake \ |
| 567 | CMake/FindLibPSL.cmake \ |
| 568 | CMake/FindLibSSH2.cmake \ |
| 569 | CMake/FindMbedTLS.cmake \ |
| 570 | CMake/FindMSH3.cmake \ |
| 571 | CMake/FindNGHTTP2.cmake \ |
| 572 | CMake/FindNGHTTP3.cmake \ |
| 573 | CMake/FindNGTCP2.cmake \ |
| 574 | CMake/FindNSS.cmake \ |
| 575 | CMake/FindQUICHE.cmake \ |
| 576 | CMake/FindWolfSSL.cmake \ |
| 577 | CMake/FindZstd.cmake \ |
| 578 | CMake/Macros.cmake \ |
| 579 | CMake/OtherTests.cmake \ |
| 580 | CMake/Platforms/WindowsCache.cmake \ |
| 581 | CMake/Utilities.cmake \ |
| 582 | CMakeLists.txt |
| 583 | |
| 584 | VC10_LIBTMPL = projects/Windows/VC10/lib/libcurl.tmpl |
| 585 | VC10_LIBVCXPROJ = projects/Windows/VC10/lib/libcurl.vcxproj.dist |
| 586 | VC10_LIBVCXPROJ_DEPS = $(VC10_LIBTMPL) Makefile.am lib/Makefile.inc |
| 587 | VC10_SRCTMPL = projects/Windows/VC10/src/curl.tmpl |
| 588 | VC10_SRCVCXPROJ = projects/Windows/VC10/src/curl.vcxproj.dist |
| 589 | VC10_SRCVCXPROJ_DEPS = $(VC10_SRCTMPL) Makefile.am src/Makefile.inc |
| 590 | VC11_LIBTMPL = projects/Windows/VC11/lib/libcurl.tmpl |
| 591 | VC11_LIBVCXPROJ = projects/Windows/VC11/lib/libcurl.vcxproj.dist |
| 592 | VC11_LIBVCXPROJ_DEPS = $(VC11_LIBTMPL) Makefile.am lib/Makefile.inc |
| 593 | VC11_SRCTMPL = projects/Windows/VC11/src/curl.tmpl |
| 594 | VC11_SRCVCXPROJ = projects/Windows/VC11/src/curl.vcxproj.dist |
| 595 | VC11_SRCVCXPROJ_DEPS = $(VC11_SRCTMPL) Makefile.am src/Makefile.inc |
| 596 | VC12_LIBTMPL = projects/Windows/VC12/lib/libcurl.tmpl |
| 597 | VC12_LIBVCXPROJ = projects/Windows/VC12/lib/libcurl.vcxproj.dist |
| 598 | VC12_LIBVCXPROJ_DEPS = $(VC12_LIBTMPL) Makefile.am lib/Makefile.inc |
| 599 | VC12_SRCTMPL = projects/Windows/VC12/src/curl.tmpl |
| 600 | VC12_SRCVCXPROJ = projects/Windows/VC12/src/curl.vcxproj.dist |
| 601 | VC12_SRCVCXPROJ_DEPS = $(VC12_SRCTMPL) Makefile.am src/Makefile.inc |
| 602 | VC14_LIBTMPL = projects/Windows/VC14/lib/libcurl.tmpl |
| 603 | VC14_LIBVCXPROJ = projects/Windows/VC14/lib/libcurl.vcxproj.dist |
| 604 | VC14_LIBVCXPROJ_DEPS = $(VC14_LIBTMPL) Makefile.am lib/Makefile.inc |
| 605 | VC14_SRCTMPL = projects/Windows/VC14/src/curl.tmpl |
| 606 | VC14_SRCVCXPROJ = projects/Windows/VC14/src/curl.vcxproj.dist |
| 607 | VC14_SRCVCXPROJ_DEPS = $(VC14_SRCTMPL) Makefile.am src/Makefile.inc |
| 608 | VC14_10_LIBTMPL = projects/Windows/VC14.10/lib/libcurl.tmpl |
| 609 | VC14_10_LIBVCXPROJ = projects/Windows/VC14.10/lib/libcurl.vcxproj.dist |
| 610 | VC14_10_LIBVCXPROJ_DEPS = $(VC14_10_LIBTMPL) Makefile.am lib/Makefile.inc |
| 611 | VC14_10_SRCTMPL = projects/Windows/VC14.10/src/curl.tmpl |
| 612 | VC14_10_SRCVCXPROJ = projects/Windows/VC14.10/src/curl.vcxproj.dist |
| 613 | VC14_10_SRCVCXPROJ_DEPS = $(VC14_10_SRCTMPL) Makefile.am src/Makefile.inc |
| 614 | VC14_30_LIBTMPL = projects/Windows/VC14.30/lib/libcurl.tmpl |
| 615 | VC14_30_LIBVCXPROJ = projects/Windows/VC14.30/lib/libcurl.vcxproj.dist |
| 616 | VC14_30_LIBVCXPROJ_DEPS = $(VC14_30_LIBTMPL) Makefile.am lib/Makefile.inc |
| 617 | VC14_30_SRCTMPL = projects/Windows/VC14.30/src/curl.tmpl |
| 618 | VC14_30_SRCVCXPROJ = projects/Windows/VC14.30/src/curl.vcxproj.dist |
| 619 | VC14_30_SRCVCXPROJ_DEPS = $(VC14_30_SRCTMPL) Makefile.am src/Makefile.inc |
| 620 | VC_DIST = projects/README.md \ |
| 621 | projects/build-openssl.bat \ |
| 622 | projects/build-wolfssl.bat \ |
| 623 | projects/checksrc.bat \ |
| 624 | projects/Windows/VC10/curl-all.sln \ |
| 625 | projects/Windows/VC10/lib/libcurl.sln \ |
| 626 | projects/Windows/VC10/lib/libcurl.vcxproj.filters \ |
| 627 | projects/Windows/VC10/src/curl.sln \ |
| 628 | projects/Windows/VC10/src/curl.vcxproj.filters \ |
| 629 | projects/Windows/VC11/curl-all.sln \ |
| 630 | projects/Windows/VC11/lib/libcurl.sln \ |
| 631 | projects/Windows/VC11/lib/libcurl.vcxproj.filters \ |
| 632 | projects/Windows/VC11/src/curl.sln \ |
| 633 | projects/Windows/VC11/src/curl.vcxproj.filters \ |
| 634 | projects/Windows/VC12/curl-all.sln \ |
| 635 | projects/Windows/VC12/lib/libcurl.sln \ |
| 636 | projects/Windows/VC12/lib/libcurl.vcxproj.filters \ |
| 637 | projects/Windows/VC12/src/curl.sln \ |
| 638 | projects/Windows/VC12/src/curl.vcxproj.filters \ |
| 639 | projects/Windows/VC14/curl-all.sln \ |
| 640 | projects/Windows/VC14/lib/libcurl.sln \ |
| 641 | projects/Windows/VC14/lib/libcurl.vcxproj.filters \ |
| 642 | projects/Windows/VC14/src/curl.sln \ |
| 643 | projects/Windows/VC14/src/curl.vcxproj.filters \ |
| 644 | projects/Windows/VC14.10/curl-all.sln \ |
| 645 | projects/Windows/VC14.10/lib/libcurl.sln \ |
| 646 | projects/Windows/VC14.10/lib/libcurl.vcxproj.filters \ |
| 647 | projects/Windows/VC14.10/src/curl.sln \ |
| 648 | projects/Windows/VC14.10/src/curl.vcxproj.filters \ |
| 649 | projects/Windows/VC14.30/curl-all.sln \ |
| 650 | projects/Windows/VC14.30/lib/libcurl.sln \ |
| 651 | projects/Windows/VC14.30/lib/libcurl.vcxproj.filters \ |
| 652 | projects/Windows/VC14.30/src/curl.sln \ |
| 653 | projects/Windows/VC14.30/src/curl.vcxproj.filters \ |
| 654 | projects/generate.bat \ |
| 655 | projects/wolfssl_options.h \ |
| 656 | projects/wolfssl_override.props |
| 657 | |
| 658 | WINBUILD_DIST = winbuild/README.md winbuild/gen_resp_file.bat \ |
| 659 | winbuild/MakefileBuild.vc winbuild/Makefile.vc |
| 660 | |
| 661 | PLAN9_DIST = plan9/include/mkfile \ |
| 662 | plan9/include/mkfile \ |
| 663 | plan9/mkfile.proto \ |
| 664 | plan9/mkfile \ |
| 665 | plan9/README \ |
| 666 | plan9/lib/mkfile.inc \ |
| 667 | plan9/lib/mkfile \ |
| 668 | plan9/src/mkfile.inc \ |
| 669 | plan9/src/mkfile |
| 670 | |
| 671 | EXTRA_DIST = CHANGES COPYING maketgz Makefile.dist curl-config.in \ |
| 672 | RELEASE-NOTES buildconf libcurl.pc.in MacOSX-Framework $(CMAKE_DIST) \ |
| 673 | $(VC_DIST) $(WINBUILD_DIST) $(PLAN9_DIST) lib/libcurl.vers.in buildconf.bat |
| 674 | |
| 675 | CLEANFILES = $(VC10_LIBVCXPROJ) $(VC10_SRCVCXPROJ) $(VC11_LIBVCXPROJ) \ |
| 676 | $(VC11_SRCVCXPROJ) $(VC12_LIBVCXPROJ) $(VC12_SRCVCXPROJ) $(VC14_LIBVCXPROJ) \ |
| 677 | $(VC14_SRCVCXPROJ) $(VC14_10_LIBVCXPROJ) $(VC14_10_SRCVCXPROJ) \ |
| 678 | $(VC14_30_LIBVCXPROJ) $(VC14_30_SRCVCXPROJ) |
| 679 | |
| 680 | bin_SCRIPTS = curl-config |
| 681 | SUBDIRS = lib src |
| 682 | DIST_SUBDIRS = $(SUBDIRS) tests packages scripts include docs |
| 683 | pkgconfigdir = $(libdir)/pkgconfig |
| 684 | pkgconfig_DATA = libcurl.pc |
| 685 | LIB_VAUTH_CFILES = \ |
| 686 | vauth/cleartext.c \ |
| 687 | vauth/cram.c \ |
| 688 | vauth/digest.c \ |
| 689 | vauth/digest_sspi.c \ |
| 690 | vauth/gsasl.c \ |
| 691 | vauth/krb5_gssapi.c \ |
| 692 | vauth/krb5_sspi.c \ |
| 693 | vauth/ntlm.c \ |
| 694 | vauth/ntlm_sspi.c \ |
| 695 | vauth/oauth2.c \ |
| 696 | vauth/spnego_gssapi.c \ |
| 697 | vauth/spnego_sspi.c \ |
| 698 | vauth/vauth.c |
| 699 | |
| 700 | LIB_VAUTH_HFILES = \ |
| 701 | vauth/digest.h \ |
| 702 | vauth/ntlm.h \ |
| 703 | vauth/vauth.h |
| 704 | |
| 705 | LIB_VTLS_CFILES = \ |
| 706 | vtls/bearssl.c \ |
| 707 | vtls/gskit.c \ |
| 708 | vtls/gtls.c \ |
| 709 | vtls/hostcheck.c \ |
| 710 | vtls/keylog.c \ |
| 711 | vtls/mbedtls.c \ |
| 712 | vtls/mbedtls_threadlock.c \ |
| 713 | vtls/nss.c \ |
| 714 | vtls/openssl.c \ |
| 715 | vtls/rustls.c \ |
| 716 | vtls/schannel.c \ |
| 717 | vtls/schannel_verify.c \ |
| 718 | vtls/sectransp.c \ |
| 719 | vtls/vtls.c \ |
| 720 | vtls/wolfssl.c \ |
| 721 | vtls/x509asn1.c |
| 722 | |
| 723 | LIB_VTLS_HFILES = \ |
| 724 | vtls/bearssl.h \ |
| 725 | vtls/gskit.h \ |
| 726 | vtls/gtls.h \ |
| 727 | vtls/hostcheck.h \ |
| 728 | vtls/keylog.h \ |
| 729 | vtls/mbedtls.h \ |
| 730 | vtls/mbedtls_threadlock.h \ |
| 731 | vtls/nssg.h \ |
| 732 | vtls/openssl.h \ |
| 733 | vtls/rustls.h \ |
| 734 | vtls/schannel.h \ |
| 735 | vtls/sectransp.h \ |
| 736 | vtls/vtls.h \ |
| 737 | vtls/wolfssl.h \ |
| 738 | vtls/x509asn1.h |
| 739 | |
| 740 | LIB_VQUIC_CFILES = \ |
| 741 | vquic/msh3.c \ |
| 742 | vquic/ngtcp2.c \ |
| 743 | vquic/quiche.c \ |
| 744 | vquic/vquic.c |
| 745 | |
| 746 | LIB_VQUIC_HFILES = \ |
| 747 | vquic/msh3.h \ |
| 748 | vquic/ngtcp2.h \ |
| 749 | vquic/quiche.h \ |
| 750 | vquic/vquic.h |
| 751 | |
| 752 | LIB_VSSH_CFILES = \ |
| 753 | vssh/libssh.c \ |
| 754 | vssh/libssh2.c \ |
| 755 | vssh/wolfssh.c |
| 756 | |
| 757 | LIB_VSSH_HFILES = \ |
| 758 | vssh/ssh.h |
| 759 | |
| 760 | LIB_CFILES = \ |
| 761 | altsvc.c \ |
| 762 | amigaos.c \ |
| 763 | asyn-ares.c \ |
| 764 | asyn-thread.c \ |
| 765 | base64.c \ |
| 766 | bufref.c \ |
| 767 | c-hyper.c \ |
| 768 | conncache.c \ |
| 769 | connect.c \ |
| 770 | content_encoding.c \ |
| 771 | cookie.c \ |
| 772 | curl_addrinfo.c \ |
| 773 | curl_des.c \ |
| 774 | curl_endian.c \ |
| 775 | curl_fnmatch.c \ |
| 776 | curl_get_line.c \ |
| 777 | curl_gethostname.c \ |
| 778 | curl_gssapi.c \ |
| 779 | curl_memrchr.c \ |
| 780 | curl_multibyte.c \ |
| 781 | curl_ntlm_core.c \ |
| 782 | curl_ntlm_wb.c \ |
| 783 | curl_path.c \ |
| 784 | curl_range.c \ |
| 785 | curl_rtmp.c \ |
| 786 | curl_sasl.c \ |
| 787 | curl_sspi.c \ |
| 788 | curl_threads.c \ |
| 789 | dict.c \ |
| 790 | doh.c \ |
| 791 | dynbuf.c \ |
| 792 | easy.c \ |
| 793 | easygetopt.c \ |
| 794 | easyoptions.c \ |
| 795 | escape.c \ |
| 796 | file.c \ |
| 797 | fileinfo.c \ |
| 798 | fopen.c \ |
| 799 | formdata.c \ |
| 800 | ftp.c \ |
| 801 | ftplistparser.c \ |
| 802 | getenv.c \ |
| 803 | getinfo.c \ |
| 804 | gopher.c \ |
| 805 | h2h3.c \ |
| 806 | hash.c \ |
| 807 | headers.c \ |
| 808 | hmac.c \ |
| 809 | hostasyn.c \ |
| 810 | hostip.c \ |
| 811 | hostip4.c \ |
| 812 | hostip6.c \ |
| 813 | hostsyn.c \ |
| 814 | hsts.c \ |
| 815 | http.c \ |
| 816 | http2.c \ |
| 817 | http_chunks.c \ |
| 818 | http_digest.c \ |
| 819 | http_negotiate.c \ |
| 820 | http_ntlm.c \ |
| 821 | http_proxy.c \ |
| 822 | http_aws_sigv4.c \ |
| 823 | idn_win32.c \ |
| 824 | if2ip.c \ |
| 825 | imap.c \ |
| 826 | inet_ntop.c \ |
| 827 | inet_pton.c \ |
| 828 | krb5.c \ |
| 829 | ldap.c \ |
| 830 | llist.c \ |
| 831 | md4.c \ |
| 832 | md5.c \ |
| 833 | memdebug.c \ |
| 834 | mime.c \ |
| 835 | mprintf.c \ |
| 836 | mqtt.c \ |
| 837 | multi.c \ |
| 838 | netrc.c \ |
| 839 | nonblock.c \ |
| 840 | noproxy.c \ |
| 841 | openldap.c \ |
| 842 | parsedate.c \ |
| 843 | pingpong.c \ |
| 844 | pop3.c \ |
| 845 | progress.c \ |
| 846 | psl.c \ |
| 847 | rand.c \ |
| 848 | rename.c \ |
| 849 | rtsp.c \ |
| 850 | select.c \ |
| 851 | sendf.c \ |
| 852 | setopt.c \ |
| 853 | sha256.c \ |
| 854 | share.c \ |
| 855 | slist.c \ |
| 856 | smb.c \ |
| 857 | smtp.c \ |
| 858 | socketpair.c \ |
| 859 | socks.c \ |
| 860 | socks_gssapi.c \ |
| 861 | socks_sspi.c \ |
| 862 | speedcheck.c \ |
| 863 | splay.c \ |
| 864 | strcase.c \ |
| 865 | strdup.c \ |
| 866 | strerror.c \ |
| 867 | strtok.c \ |
| 868 | strtoofft.c \ |
| 869 | system_win32.c \ |
| 870 | telnet.c \ |
| 871 | tftp.c \ |
| 872 | timediff.c \ |
| 873 | timeval.c \ |
| 874 | transfer.c \ |
| 875 | url.c \ |
| 876 | urlapi.c \ |
| 877 | version.c \ |
| 878 | version_win32.c \ |
| 879 | warnless.c \ |
| 880 | wildcard.c \ |
| 881 | ws.c |
| 882 | |
| 883 | LIB_HFILES = \ |
| 884 | altsvc.h \ |
| 885 | amigaos.h \ |
| 886 | arpa_telnet.h \ |
| 887 | asyn.h \ |
| 888 | bufref.h \ |
| 889 | c-hyper.h \ |
| 890 | conncache.h \ |
| 891 | connect.h \ |
| 892 | content_encoding.h \ |
| 893 | cookie.h \ |
| 894 | curl_addrinfo.h \ |
| 895 | curl_base64.h \ |
| 896 | curl_ctype.h \ |
| 897 | curl_des.h \ |
| 898 | curl_endian.h \ |
| 899 | curl_fnmatch.h \ |
| 900 | curl_get_line.h \ |
| 901 | curl_gethostname.h \ |
| 902 | curl_gssapi.h \ |
| 903 | curl_hmac.h \ |
| 904 | curl_krb5.h \ |
| 905 | curl_ldap.h \ |
| 906 | curl_md4.h \ |
| 907 | curl_md5.h \ |
| 908 | curl_memory.h \ |
| 909 | curl_memrchr.h \ |
| 910 | curl_multibyte.h \ |
| 911 | curl_ntlm_core.h \ |
| 912 | curl_ntlm_wb.h \ |
| 913 | curl_path.h \ |
| 914 | curl_printf.h \ |
| 915 | curl_range.h \ |
| 916 | curl_rtmp.h \ |
| 917 | curl_sasl.h \ |
| 918 | curl_setup.h \ |
| 919 | curl_setup_once.h \ |
| 920 | curl_sha256.h \ |
| 921 | curl_sspi.h \ |
| 922 | curl_threads.h \ |
| 923 | curlx.h \ |
| 924 | dict.h \ |
| 925 | doh.h \ |
| 926 | dynbuf.h \ |
| 927 | easy_lock.h \ |
| 928 | easyif.h \ |
| 929 | easyoptions.h \ |
| 930 | escape.h \ |
| 931 | file.h \ |
| 932 | fileinfo.h \ |
| 933 | fopen.h \ |
| 934 | formdata.h \ |
| 935 | functypes.h \ |
| 936 | ftp.h \ |
| 937 | ftplistparser.h \ |
| 938 | getinfo.h \ |
| 939 | gopher.h \ |
| 940 | h2h3.h \ |
| 941 | hash.h \ |
| 942 | headers.h \ |
| 943 | hostip.h \ |
| 944 | hsts.h \ |
| 945 | http.h \ |
| 946 | http2.h \ |
| 947 | http_chunks.h \ |
| 948 | http_digest.h \ |
| 949 | http_negotiate.h \ |
| 950 | http_ntlm.h \ |
| 951 | http_proxy.h \ |
| 952 | http_aws_sigv4.h \ |
| 953 | if2ip.h \ |
| 954 | imap.h \ |
| 955 | inet_ntop.h \ |
| 956 | inet_pton.h \ |
| 957 | llist.h \ |
| 958 | memdebug.h \ |
| 959 | mime.h \ |
| 960 | mqtt.h \ |
| 961 | multihandle.h \ |
| 962 | multiif.h \ |
| 963 | netrc.h \ |
| 964 | nonblock.h \ |
| 965 | noproxy.h \ |
| 966 | parsedate.h \ |
| 967 | pingpong.h \ |
| 968 | pop3.h \ |
| 969 | progress.h \ |
| 970 | psl.h \ |
| 971 | quic.h \ |
| 972 | rand.h \ |
| 973 | rename.h \ |
| 974 | rtsp.h \ |
| 975 | select.h \ |
| 976 | sendf.h \ |
| 977 | setopt.h \ |
| 978 | setup-vms.h \ |
| 979 | share.h \ |
| 980 | sigpipe.h \ |
| 981 | slist.h \ |
| 982 | smb.h \ |
| 983 | smtp.h \ |
| 984 | sockaddr.h \ |
| 985 | socketpair.h \ |
| 986 | socks.h \ |
| 987 | speedcheck.h \ |
| 988 | splay.h \ |
| 989 | strcase.h \ |
| 990 | strdup.h \ |
| 991 | strerror.h \ |
| 992 | strtok.h \ |
| 993 | strtoofft.h \ |
| 994 | system_win32.h \ |
| 995 | telnet.h \ |
| 996 | tftp.h \ |
| 997 | timediff.h \ |
| 998 | timeval.h \ |
| 999 | transfer.h \ |
| 1000 | url.h \ |
| 1001 | urlapi-int.h \ |
| 1002 | urldata.h \ |
| 1003 | version_win32.h \ |
| 1004 | warnless.h \ |
| 1005 | wildcard.h \ |
| 1006 | ws.h |
| 1007 | |
| 1008 | LIB_RCFILES = libcurl.rc |
| 1009 | CSOURCES = $(LIB_CFILES) $(LIB_VAUTH_CFILES) $(LIB_VTLS_CFILES) \ |
| 1010 | $(LIB_VQUIC_CFILES) $(LIB_VSSH_CFILES) |
| 1011 | |
| 1012 | HHEADERS = $(LIB_HFILES) $(LIB_VAUTH_HFILES) $(LIB_VTLS_HFILES) \ |
| 1013 | $(LIB_VQUIC_HFILES) $(LIB_VSSH_HFILES) |
| 1014 | |
| 1015 | |
| 1016 | # libcurl has sources that provide functions named curlx_* that aren't part of |
| 1017 | # the official API, but we re-use the code here to avoid duplication. |
| 1018 | CURLX_CFILES = \ |
| 1019 | ../lib/strtoofft.c \ |
| 1020 | ../lib/timediff.c \ |
| 1021 | ../lib/nonblock.c \ |
| 1022 | ../lib/warnless.c \ |
| 1023 | ../lib/curl_multibyte.c \ |
| 1024 | ../lib/version_win32.c \ |
| 1025 | ../lib/dynbuf.c |
| 1026 | |
| 1027 | CURLX_HFILES = \ |
| 1028 | ../lib/curl_setup.h \ |
| 1029 | ../lib/strtoofft.h \ |
| 1030 | ../lib/timediff.h \ |
| 1031 | ../lib/nonblock.h \ |
| 1032 | ../lib/warnless.h \ |
| 1033 | ../lib/curl_ctype.h \ |
| 1034 | ../lib/curl_multibyte.h \ |
| 1035 | ../lib/version_win32.h \ |
| 1036 | ../lib/dynbuf.h |
| 1037 | |
| 1038 | CURL_CFILES = \ |
| 1039 | slist_wc.c \ |
| 1040 | tool_binmode.c \ |
| 1041 | tool_bname.c \ |
| 1042 | tool_cb_dbg.c \ |
| 1043 | tool_cb_hdr.c \ |
| 1044 | tool_cb_prg.c \ |
| 1045 | tool_cb_rea.c \ |
| 1046 | tool_cb_see.c \ |
| 1047 | tool_cb_wrt.c \ |
| 1048 | tool_cfgable.c \ |
| 1049 | tool_dirhie.c \ |
| 1050 | tool_doswin.c \ |
| 1051 | tool_easysrc.c \ |
| 1052 | tool_filetime.c \ |
| 1053 | tool_findfile.c \ |
| 1054 | tool_formparse.c \ |
| 1055 | tool_getparam.c \ |
| 1056 | tool_getpass.c \ |
| 1057 | tool_help.c \ |
| 1058 | tool_helpers.c \ |
| 1059 | tool_hugehelp.c \ |
| 1060 | tool_libinfo.c \ |
| 1061 | tool_listhelp.c \ |
| 1062 | tool_main.c \ |
| 1063 | tool_msgs.c \ |
| 1064 | tool_operate.c \ |
| 1065 | tool_operhlp.c \ |
| 1066 | tool_panykey.c \ |
| 1067 | tool_paramhlp.c \ |
| 1068 | tool_parsecfg.c \ |
| 1069 | tool_progress.c \ |
| 1070 | tool_strdup.c \ |
| 1071 | tool_setopt.c \ |
| 1072 | tool_sleep.c \ |
| 1073 | tool_urlglob.c \ |
| 1074 | tool_util.c \ |
| 1075 | tool_vms.c \ |
| 1076 | tool_writeout.c \ |
| 1077 | tool_writeout_json.c \ |
| 1078 | tool_xattr.c |
| 1079 | |
| 1080 | CURL_HFILES = \ |
| 1081 | slist_wc.h \ |
| 1082 | tool_binmode.h \ |
| 1083 | tool_bname.h \ |
| 1084 | tool_cb_dbg.h \ |
| 1085 | tool_cb_hdr.h \ |
| 1086 | tool_cb_prg.h \ |
| 1087 | tool_cb_rea.h \ |
| 1088 | tool_cb_see.h \ |
| 1089 | tool_cb_wrt.h \ |
| 1090 | tool_cfgable.h \ |
| 1091 | tool_dirhie.h \ |
| 1092 | tool_doswin.h \ |
| 1093 | tool_easysrc.h \ |
| 1094 | tool_filetime.h \ |
| 1095 | tool_findfile.h \ |
| 1096 | tool_formparse.h \ |
| 1097 | tool_getparam.h \ |
| 1098 | tool_getpass.h \ |
| 1099 | tool_help.h \ |
| 1100 | tool_helpers.h \ |
| 1101 | tool_hugehelp.h \ |
| 1102 | tool_libinfo.h \ |
| 1103 | tool_main.h \ |
| 1104 | tool_msgs.h \ |
| 1105 | tool_operate.h \ |
| 1106 | tool_operhlp.h \ |
| 1107 | tool_panykey.h \ |
| 1108 | tool_paramhlp.h \ |
| 1109 | tool_parsecfg.h \ |
| 1110 | tool_progress.h \ |
| 1111 | tool_sdecls.h \ |
| 1112 | tool_setopt.h \ |
| 1113 | tool_setup.h \ |
| 1114 | tool_sleep.h \ |
| 1115 | tool_strdup.h \ |
| 1116 | tool_urlglob.h \ |
| 1117 | tool_util.h \ |
| 1118 | tool_version.h \ |
| 1119 | tool_vms.h \ |
| 1120 | tool_writeout.h \ |
| 1121 | tool_writeout_json.h \ |
| 1122 | tool_xattr.h |
| 1123 | |
| 1124 | CURL_RCFILES = curl.rc |
| 1125 | |
| 1126 | # curl_SOURCES is special and gets assigned in src/Makefile.am |
| 1127 | CURL_FILES = $(CURL_CFILES) $(CURLX_CFILES) $(CURL_HFILES) |
| 1128 | all: all-recursive |
| 1129 | |
| 1130 | .SUFFIXES: |
| 1131 | am--refresh: Makefile |
| 1132 | @: |
| 1133 | $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(srcdir)/lib/Makefile.inc $(srcdir)/src/Makefile.inc $(am__configure_deps) |
| 1134 | @for dep in $?; do \ |
| 1135 | case '$(am__configure_deps)' in \ |
| 1136 | *$$dep*) \ |
| 1137 | echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ |
| 1138 | $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ |
| 1139 | && exit 0; \ |
| 1140 | exit 1;; \ |
| 1141 | esac; \ |
| 1142 | done; \ |
| 1143 | echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ |
| 1144 | $(am__cd) $(top_srcdir) && \ |
| 1145 | $(AUTOMAKE) --foreign Makefile |
| 1146 | Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status |
| 1147 | @case '$?' in \ |
| 1148 | *config.status*) \ |
| 1149 | echo ' $(SHELL) ./config.status'; \ |
| 1150 | $(SHELL) ./config.status;; \ |
| 1151 | *) \ |
| 1152 | echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \ |
| 1153 | cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \ |
| 1154 | esac; |
| 1155 | $(srcdir)/lib/Makefile.inc $(srcdir)/src/Makefile.inc $(am__empty): |
| 1156 | |
| 1157 | $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) |
| 1158 | $(SHELL) ./config.status --recheck |
| 1159 | |
| 1160 | $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) |
| 1161 | $(am__cd) $(srcdir) && $(AUTOCONF) |
| 1162 | $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) |
| 1163 | $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) |
| 1164 | $(am__aclocal_m4_deps): |
| 1165 | curl-config: $(top_builddir)/config.status $(srcdir)/curl-config.in |
| 1166 | cd $(top_builddir) && $(SHELL) ./config.status $@ |
| 1167 | libcurl.pc: $(top_builddir)/config.status $(srcdir)/libcurl.pc.in |
| 1168 | cd $(top_builddir) && $(SHELL) ./config.status $@ |
| 1169 | install-binSCRIPTS: $(bin_SCRIPTS) |
| 1170 | @$(NORMAL_INSTALL) |
| 1171 | @list='$(bin_SCRIPTS)'; test -n "$(bindir)" || list=; \ |
| 1172 | if test -n "$$list"; then \ |
| 1173 | echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \ |
| 1174 | $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \ |
| 1175 | fi; \ |
| 1176 | for p in $$list; do \ |
| 1177 | if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| 1178 | if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \ |
| 1179 | done | \ |
| 1180 | sed -e 'p;s,.*/,,;n' \ |
| 1181 | -e 'h;s|.*|.|' \ |
| 1182 | -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \ |
| 1183 | $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \ |
| 1184 | { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ |
| 1185 | if ($$2 == $$4) { files[d] = files[d] " " $$1; \ |
| 1186 | if (++n[d] == $(am__install_max)) { \ |
| 1187 | print "f", d, files[d]; n[d] = 0; files[d] = "" } } \ |
| 1188 | else { print "f", d "/" $$4, $$1 } } \ |
| 1189 | END { for (d in files) print "f", d, files[d] }' | \ |
| 1190 | while read type dir files; do \ |
| 1191 | if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ |
| 1192 | test -z "$$files" || { \ |
| 1193 | echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(bindir)$$dir'"; \ |
| 1194 | $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \ |
| 1195 | } \ |
| 1196 | ; done |
| 1197 | |
| 1198 | uninstall-binSCRIPTS: |
| 1199 | @$(NORMAL_UNINSTALL) |
| 1200 | @list='$(bin_SCRIPTS)'; test -n "$(bindir)" || exit 0; \ |
| 1201 | files=`for p in $$list; do echo "$$p"; done | \ |
| 1202 | sed -e 's,.*/,,;$(transform)'`; \ |
| 1203 | dir='$(DESTDIR)$(bindir)'; $(am__uninstall_files_from_dir) |
| 1204 | |
| 1205 | mostlyclean-libtool: |
| 1206 | -rm -f *.lo |
| 1207 | |
| 1208 | clean-libtool: |
| 1209 | -rm -rf .libs _libs |
| 1210 | |
| 1211 | distclean-libtool: |
| 1212 | -rm -f libtool config.lt |
| 1213 | install-pkgconfigDATA: $(pkgconfig_DATA) |
| 1214 | @$(NORMAL_INSTALL) |
| 1215 | @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ |
| 1216 | if test -n "$$list"; then \ |
| 1217 | echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \ |
| 1218 | $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \ |
| 1219 | fi; \ |
| 1220 | for p in $$list; do \ |
| 1221 | if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| 1222 | echo "$$d$$p"; \ |
| 1223 | done | $(am__base_list) | \ |
| 1224 | while read files; do \ |
| 1225 | echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \ |
| 1226 | $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \ |
| 1227 | done |
| 1228 | |
| 1229 | uninstall-pkgconfigDATA: |
| 1230 | @$(NORMAL_UNINSTALL) |
| 1231 | @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ |
| 1232 | files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ |
| 1233 | dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir) |
| 1234 | |
| 1235 | # This directory's subdirectories are mostly independent; you can cd |
| 1236 | # into them and run 'make' without going through this Makefile. |
| 1237 | # To change the values of 'make' variables: instead of editing Makefiles, |
| 1238 | # (1) if the variable is set in 'config.status', edit 'config.status' |
| 1239 | # (which will cause the Makefiles to be regenerated when you run 'make'); |
| 1240 | # (2) otherwise, pass the desired values on the 'make' command line. |
| 1241 | $(am__recursive_targets): |
| 1242 | @fail=; \ |
| 1243 | if $(am__make_keepgoing); then \ |
| 1244 | failcom='fail=yes'; \ |
| 1245 | else \ |
| 1246 | failcom='exit 1'; \ |
| 1247 | fi; \ |
| 1248 | dot_seen=no; \ |
| 1249 | target=`echo $@ | sed s/-recursive//`; \ |
| 1250 | case "$@" in \ |
| 1251 | distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ |
| 1252 | *) list='$(SUBDIRS)' ;; \ |
| 1253 | esac; \ |
| 1254 | for subdir in $$list; do \ |
| 1255 | echo "Making $$target in $$subdir"; \ |
| 1256 | if test "$$subdir" = "."; then \ |
| 1257 | dot_seen=yes; \ |
| 1258 | local_target="$$target-am"; \ |
| 1259 | else \ |
| 1260 | local_target="$$target"; \ |
| 1261 | fi; \ |
| 1262 | ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ |
| 1263 | || eval $$failcom; \ |
| 1264 | done; \ |
| 1265 | if test "$$dot_seen" = "no"; then \ |
| 1266 | $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ |
| 1267 | fi; test -z "$$fail" |
| 1268 | |
| 1269 | ID: $(am__tagged_files) |
| 1270 | $(am__define_uniq_tagged_files); mkid -fID $$unique |
| 1271 | tags: tags-recursive |
| 1272 | TAGS: tags |
| 1273 | |
| 1274 | tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) |
| 1275 | set x; \ |
| 1276 | here=`pwd`; \ |
| 1277 | if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ |
| 1278 | include_option=--etags-include; \ |
| 1279 | empty_fix=.; \ |
| 1280 | else \ |
| 1281 | include_option=--include; \ |
| 1282 | empty_fix=; \ |
| 1283 | fi; \ |
| 1284 | list='$(SUBDIRS)'; for subdir in $$list; do \ |
| 1285 | if test "$$subdir" = .; then :; else \ |
| 1286 | test ! -f $$subdir/TAGS || \ |
| 1287 | set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ |
| 1288 | fi; \ |
| 1289 | done; \ |
| 1290 | $(am__define_uniq_tagged_files); \ |
| 1291 | shift; \ |
| 1292 | if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ |
| 1293 | test -n "$$unique" || unique=$$empty_fix; \ |
| 1294 | if test $$# -gt 0; then \ |
| 1295 | $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ |
| 1296 | "$$@" $$unique; \ |
| 1297 | else \ |
| 1298 | $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ |
| 1299 | $$unique; \ |
| 1300 | fi; \ |
| 1301 | fi |
| 1302 | ctags: ctags-recursive |
| 1303 | |
| 1304 | CTAGS: ctags |
| 1305 | ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) |
| 1306 | $(am__define_uniq_tagged_files); \ |
| 1307 | test -z "$(CTAGS_ARGS)$$unique" \ |
| 1308 | || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ |
| 1309 | $$unique |
| 1310 | |
| 1311 | GTAGS: |
| 1312 | here=`$(am__cd) $(top_builddir) && pwd` \ |
| 1313 | && $(am__cd) $(top_srcdir) \ |
| 1314 | && gtags -i $(GTAGS_ARGS) "$$here" |
| 1315 | cscope: cscope.files |
| 1316 | test ! -s cscope.files \ |
| 1317 | || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) |
| 1318 | clean-cscope: |
| 1319 | -rm -f cscope.files |
| 1320 | cscope.files: clean-cscope cscopelist |
| 1321 | cscopelist: cscopelist-recursive |
| 1322 | |
| 1323 | cscopelist-am: $(am__tagged_files) |
| 1324 | list='$(am__tagged_files)'; \ |
| 1325 | case "$(srcdir)" in \ |
| 1326 | [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ |
| 1327 | *) sdir=$(subdir)/$(srcdir) ;; \ |
| 1328 | esac; \ |
| 1329 | for i in $$list; do \ |
| 1330 | if test -f "$$i"; then \ |
| 1331 | echo "$(subdir)/$$i"; \ |
| 1332 | else \ |
| 1333 | echo "$$sdir/$$i"; \ |
| 1334 | fi; \ |
| 1335 | done >> $(top_builddir)/cscope.files |
| 1336 | |
| 1337 | distclean-tags: |
| 1338 | -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags |
| 1339 | -rm -f cscope.out cscope.in.out cscope.po.out cscope.files |
| 1340 | distdir: $(BUILT_SOURCES) |
| 1341 | $(MAKE) $(AM_MAKEFLAGS) distdir-am |
| 1342 | |
| 1343 | distdir-am: $(DISTFILES) |
| 1344 | $(am__remove_distdir) |
| 1345 | test -d "$(distdir)" || mkdir "$(distdir)" |
| 1346 | @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ |
| 1347 | topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ |
| 1348 | list='$(DISTFILES)'; \ |
| 1349 | dist_files=`for file in $$list; do echo $$file; done | \ |
| 1350 | sed -e "s|^$$srcdirstrip/||;t" \ |
| 1351 | -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ |
| 1352 | case $$dist_files in \ |
| 1353 | */*) $(MKDIR_P) `echo "$$dist_files" | \ |
| 1354 | sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ |
| 1355 | sort -u` ;; \ |
| 1356 | esac; \ |
| 1357 | for file in $$dist_files; do \ |
| 1358 | if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ |
| 1359 | if test -d $$d/$$file; then \ |
| 1360 | dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ |
| 1361 | if test -d "$(distdir)/$$file"; then \ |
| 1362 | find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ |
| 1363 | fi; \ |
| 1364 | if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ |
| 1365 | cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ |
| 1366 | find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ |
| 1367 | fi; \ |
| 1368 | cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ |
| 1369 | else \ |
| 1370 | test -f "$(distdir)/$$file" \ |
| 1371 | || cp -p $$d/$$file "$(distdir)/$$file" \ |
| 1372 | || exit 1; \ |
| 1373 | fi; \ |
| 1374 | done |
| 1375 | @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ |
| 1376 | if test "$$subdir" = .; then :; else \ |
| 1377 | $(am__make_dryrun) \ |
| 1378 | || test -d "$(distdir)/$$subdir" \ |
| 1379 | || $(MKDIR_P) "$(distdir)/$$subdir" \ |
| 1380 | || exit 1; \ |
| 1381 | dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ |
| 1382 | $(am__relativize); \ |
| 1383 | new_distdir=$$reldir; \ |
| 1384 | dir1=$$subdir; dir2="$(top_distdir)"; \ |
| 1385 | $(am__relativize); \ |
| 1386 | new_top_distdir=$$reldir; \ |
| 1387 | echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ |
| 1388 | echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ |
| 1389 | ($(am__cd) $$subdir && \ |
| 1390 | $(MAKE) $(AM_MAKEFLAGS) \ |
| 1391 | top_distdir="$$new_top_distdir" \ |
| 1392 | distdir="$$new_distdir" \ |
| 1393 | am__remove_distdir=: \ |
| 1394 | am__skip_length_check=: \ |
| 1395 | am__skip_mode_fix=: \ |
| 1396 | distdir) \ |
| 1397 | || exit 1; \ |
| 1398 | fi; \ |
| 1399 | done |
| 1400 | $(MAKE) $(AM_MAKEFLAGS) \ |
| 1401 | top_distdir="$(top_distdir)" distdir="$(distdir)" \ |
| 1402 | dist-hook |
| 1403 | -test -n "$(am__skip_mode_fix)" \ |
| 1404 | || find "$(distdir)" -type d ! -perm -755 \ |
| 1405 | -exec chmod u+rwx,go+rx {} \; -o \ |
| 1406 | ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ |
| 1407 | ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ |
| 1408 | ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ |
| 1409 | || chmod -R a+r "$(distdir)" |
| 1410 | dist-gzip: distdir |
| 1411 | tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz |
| 1412 | $(am__post_remove_distdir) |
| 1413 | |
| 1414 | dist-bzip2: distdir |
| 1415 | tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 |
| 1416 | $(am__post_remove_distdir) |
| 1417 | |
| 1418 | dist-lzip: distdir |
| 1419 | tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz |
| 1420 | $(am__post_remove_distdir) |
| 1421 | |
| 1422 | dist-xz: distdir |
| 1423 | tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz |
| 1424 | $(am__post_remove_distdir) |
| 1425 | |
| 1426 | dist-zstd: distdir |
| 1427 | tardir=$(distdir) && $(am__tar) | zstd -c $${ZSTD_CLEVEL-$${ZSTD_OPT--19}} >$(distdir).tar.zst |
| 1428 | $(am__post_remove_distdir) |
| 1429 | |
| 1430 | dist-tarZ: distdir |
| 1431 | @echo WARNING: "Support for distribution archives compressed with" \ |
| 1432 | "legacy program 'compress' is deprecated." >&2 |
| 1433 | @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 |
| 1434 | tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z |
| 1435 | $(am__post_remove_distdir) |
| 1436 | |
| 1437 | dist-shar: distdir |
| 1438 | @echo WARNING: "Support for shar distribution archives is" \ |
| 1439 | "deprecated." >&2 |
| 1440 | @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 |
| 1441 | shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz |
| 1442 | $(am__post_remove_distdir) |
| 1443 | |
| 1444 | dist-zip: distdir |
| 1445 | -rm -f $(distdir).zip |
| 1446 | zip -rq $(distdir).zip $(distdir) |
| 1447 | $(am__post_remove_distdir) |
| 1448 | |
| 1449 | dist dist-all: |
| 1450 | $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' |
| 1451 | $(am__post_remove_distdir) |
| 1452 | |
| 1453 | # This target untars the dist file and tries a VPATH configuration. Then |
| 1454 | # it guarantees that the distribution is self-contained by making another |
| 1455 | # tarfile. |
| 1456 | distcheck: dist |
| 1457 | case '$(DIST_ARCHIVES)' in \ |
| 1458 | *.tar.gz*) \ |
| 1459 | eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\ |
| 1460 | *.tar.bz2*) \ |
| 1461 | bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ |
| 1462 | *.tar.lz*) \ |
| 1463 | lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ |
| 1464 | *.tar.xz*) \ |
| 1465 | xz -dc $(distdir).tar.xz | $(am__untar) ;;\ |
| 1466 | *.tar.Z*) \ |
| 1467 | uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ |
| 1468 | *.shar.gz*) \ |
| 1469 | eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\ |
| 1470 | *.zip*) \ |
| 1471 | unzip $(distdir).zip ;;\ |
| 1472 | *.tar.zst*) \ |
| 1473 | zstd -dc $(distdir).tar.zst | $(am__untar) ;;\ |
| 1474 | esac |
| 1475 | chmod -R a-w $(distdir) |
| 1476 | chmod u+w $(distdir) |
| 1477 | mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst |
| 1478 | chmod a-w $(distdir) |
| 1479 | test -d $(distdir)/_build || exit 0; \ |
| 1480 | dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ |
| 1481 | && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ |
| 1482 | && am__cwd=`pwd` \ |
| 1483 | && $(am__cd) $(distdir)/_build/sub \ |
| 1484 | && ../../configure \ |
| 1485 | $(AM_DISTCHECK_CONFIGURE_FLAGS) \ |
| 1486 | $(DISTCHECK_CONFIGURE_FLAGS) \ |
| 1487 | --srcdir=../.. --prefix="$$dc_install_base" \ |
| 1488 | && $(MAKE) $(AM_MAKEFLAGS) \ |
| 1489 | && $(MAKE) $(AM_MAKEFLAGS) $(AM_DISTCHECK_DVI_TARGET) \ |
| 1490 | && $(MAKE) $(AM_MAKEFLAGS) check \ |
| 1491 | && $(MAKE) $(AM_MAKEFLAGS) install \ |
| 1492 | && $(MAKE) $(AM_MAKEFLAGS) installcheck \ |
| 1493 | && $(MAKE) $(AM_MAKEFLAGS) uninstall \ |
| 1494 | && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ |
| 1495 | distuninstallcheck \ |
| 1496 | && chmod -R a-w "$$dc_install_base" \ |
| 1497 | && ({ \ |
| 1498 | (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ |
| 1499 | && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ |
| 1500 | && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ |
| 1501 | && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ |
| 1502 | distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ |
| 1503 | } || { rm -rf "$$dc_destdir"; exit 1; }) \ |
| 1504 | && rm -rf "$$dc_destdir" \ |
| 1505 | && $(MAKE) $(AM_MAKEFLAGS) dist \ |
| 1506 | && rm -rf $(DIST_ARCHIVES) \ |
| 1507 | && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ |
| 1508 | && cd "$$am__cwd" \ |
| 1509 | || exit 1 |
| 1510 | $(am__post_remove_distdir) |
| 1511 | @(echo "$(distdir) archives ready for distribution: "; \ |
| 1512 | list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ |
| 1513 | sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' |
| 1514 | distuninstallcheck: |
| 1515 | @test -n '$(distuninstallcheck_dir)' || { \ |
| 1516 | echo 'ERROR: trying to run $@ with an empty' \ |
| 1517 | '$$(distuninstallcheck_dir)' >&2; \ |
| 1518 | exit 1; \ |
| 1519 | }; \ |
| 1520 | $(am__cd) '$(distuninstallcheck_dir)' || { \ |
| 1521 | echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ |
| 1522 | exit 1; \ |
| 1523 | }; \ |
| 1524 | test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ |
| 1525 | || { echo "ERROR: files left after uninstall:" ; \ |
| 1526 | if test -n "$(DESTDIR)"; then \ |
| 1527 | echo " (check DESTDIR support)"; \ |
| 1528 | fi ; \ |
| 1529 | $(distuninstallcheck_listfiles) ; \ |
| 1530 | exit 1; } >&2 |
| 1531 | distcleancheck: distclean |
| 1532 | @if test '$(srcdir)' = . ; then \ |
| 1533 | echo "ERROR: distcleancheck can only run from a VPATH build" ; \ |
| 1534 | exit 1 ; \ |
| 1535 | fi |
| 1536 | @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ |
| 1537 | || { echo "ERROR: files left in build directory after distclean:" ; \ |
| 1538 | $(distcleancheck_listfiles) ; \ |
| 1539 | exit 1; } >&2 |
| 1540 | check-am: all-am |
| 1541 | check: check-recursive |
| 1542 | all-am: Makefile $(SCRIPTS) $(DATA) |
| 1543 | installdirs: installdirs-recursive |
| 1544 | installdirs-am: |
| 1545 | for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(pkgconfigdir)"; do \ |
| 1546 | test -z "$$dir" || $(MKDIR_P) "$$dir"; \ |
| 1547 | done |
| 1548 | install: install-recursive |
| 1549 | install-exec: install-exec-recursive |
| 1550 | install-data: install-data-recursive |
| 1551 | uninstall: uninstall-recursive |
| 1552 | |
| 1553 | install-am: all-am |
| 1554 | @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am |
| 1555 | |
| 1556 | installcheck: installcheck-recursive |
| 1557 | install-strip: |
| 1558 | if test -z '$(STRIP)'; then \ |
| 1559 | $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ |
| 1560 | install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ |
| 1561 | install; \ |
| 1562 | else \ |
| 1563 | $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ |
| 1564 | install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ |
| 1565 | "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ |
| 1566 | fi |
| 1567 | mostlyclean-generic: |
| 1568 | |
| 1569 | clean-generic: |
| 1570 | -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) |
| 1571 | |
| 1572 | distclean-generic: |
| 1573 | -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) |
| 1574 | -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) |
| 1575 | |
| 1576 | maintainer-clean-generic: |
| 1577 | @echo "This command is intended for maintainers to use" |
| 1578 | @echo "it deletes files that may require special tools to rebuild." |
| 1579 | clean: clean-recursive |
| 1580 | |
| 1581 | clean-am: clean-generic clean-libtool mostlyclean-am |
| 1582 | |
| 1583 | distclean: distclean-recursive |
| 1584 | -rm -f $(am__CONFIG_DISTCLEAN_FILES) |
| 1585 | -rm -f Makefile |
| 1586 | distclean-am: clean-am distclean-generic distclean-libtool \ |
| 1587 | distclean-tags |
| 1588 | |
| 1589 | dvi: dvi-recursive |
| 1590 | |
| 1591 | dvi-am: |
| 1592 | |
| 1593 | html-am: |
| 1594 | |
| 1595 | info: info-recursive |
| 1596 | |
| 1597 | info-am: |
| 1598 | |
| 1599 | install-data-am: install-pkgconfigDATA |
| 1600 | @$(NORMAL_INSTALL) |
| 1601 | $(MAKE) $(AM_MAKEFLAGS) install-data-hook |
| 1602 | install-dvi: install-dvi-recursive |
| 1603 | |
| 1604 | install-dvi-am: |
| 1605 | |
| 1606 | install-exec-am: install-binSCRIPTS |
| 1607 | |
| 1608 | install-html: install-html-recursive |
| 1609 | |
| 1610 | install-html-am: |
| 1611 | |
| 1612 | install-info: install-info-recursive |
| 1613 | |
| 1614 | install-info-am: |
| 1615 | |
| 1616 | install-man: |
| 1617 | |
| 1618 | install-pdf: install-pdf-recursive |
| 1619 | |
| 1620 | install-pdf-am: |
| 1621 | |
| 1622 | install-ps: install-ps-recursive |
| 1623 | |
| 1624 | install-ps-am: |
| 1625 | |
| 1626 | installcheck-am: |
| 1627 | |
| 1628 | maintainer-clean: maintainer-clean-recursive |
| 1629 | -rm -f $(am__CONFIG_DISTCLEAN_FILES) |
| 1630 | -rm -rf $(top_srcdir)/autom4te.cache |
| 1631 | -rm -f Makefile |
| 1632 | maintainer-clean-am: distclean-am maintainer-clean-generic |
| 1633 | |
| 1634 | mostlyclean: mostlyclean-recursive |
| 1635 | |
| 1636 | mostlyclean-am: mostlyclean-generic mostlyclean-libtool |
| 1637 | |
| 1638 | pdf-am: |
| 1639 | |
| 1640 | ps: ps-recursive |
| 1641 | |
| 1642 | ps-am: |
| 1643 | |
| 1644 | uninstall-am: uninstall-binSCRIPTS uninstall-pkgconfigDATA |
| 1645 | @$(NORMAL_INSTALL) |
| 1646 | $(MAKE) $(AM_MAKEFLAGS) uninstall-hook |
| 1647 | .MAKE: $(am__recursive_targets) install-am install-data-am \ |
| 1648 | install-strip uninstall-am |
| 1649 | |
| 1650 | .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \ |
| 1651 | am--refresh check check-am clean clean-cscope clean-generic \ |
| 1652 | clean-libtool cscope cscopelist-am ctags ctags-am dist \ |
| 1653 | dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar \ |
| 1654 | dist-tarZ dist-xz dist-zip dist-zstd distcheck distclean \ |
| 1655 | distclean-generic distclean-libtool distclean-tags \ |
| 1656 | distcleancheck distdir distuninstallcheck dvi dvi-am html \ |
| 1657 | html-am info info-am install install-am install-binSCRIPTS \ |
| 1658 | install-data install-data-am install-data-hook install-dvi \ |
| 1659 | install-dvi-am install-exec install-exec-am install-html \ |
| 1660 | install-html-am install-info install-info-am install-man \ |
| 1661 | install-pdf install-pdf-am install-pkgconfigDATA install-ps \ |
| 1662 | install-ps-am install-strip installcheck installcheck-am \ |
| 1663 | installdirs installdirs-am maintainer-clean \ |
| 1664 | maintainer-clean-generic mostlyclean mostlyclean-generic \ |
| 1665 | mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \ |
| 1666 | uninstall-am uninstall-binSCRIPTS uninstall-hook \ |
| 1667 | uninstall-pkgconfigDATA |
| 1668 | |
| 1669 | .PRECIOUS: Makefile |
| 1670 | |
| 1671 | |
| 1672 | # List of files required to generate VC IDE .dsp, .vcproj and .vcxproj files |
| 1673 | |
| 1674 | dist-hook: |
| 1675 | rm -rf $(top_builddir)/tests/log |
| 1676 | find $(distdir) -name "*.dist" -exec rm {} \; |
| 1677 | (distit=`find $(srcdir) -name "*.dist" | grep -v ./ares/`; \ |
| 1678 | for file in $$distit; do \ |
| 1679 | strip=`echo $$file | sed -e s/^$(srcdir)// -e s/\.dist//`; \ |
| 1680 | cp -p $$file $(distdir)$$strip; \ |
| 1681 | done) |
| 1682 | |
| 1683 | html: |
| 1684 | cd docs && $(MAKE) html |
| 1685 | |
| 1686 | pdf: |
| 1687 | cd docs && $(MAKE) pdf |
| 1688 | |
| 1689 | check: test examples check-docs |
| 1690 | |
| 1691 | @CROSSCOMPILING_TRUE@test-full: test |
| 1692 | @CROSSCOMPILING_TRUE@test-torture: test |
| 1693 | |
| 1694 | @CROSSCOMPILING_TRUE@test: |
| 1695 | @CROSSCOMPILING_TRUE@ @echo "NOTICE: we can't run the tests when cross-compiling!" |
| 1696 | |
| 1697 | @CROSSCOMPILING_FALSE@test: |
| 1698 | @CROSSCOMPILING_FALSE@ @(cd tests; $(MAKE) all quiet-test) |
| 1699 | |
| 1700 | @CROSSCOMPILING_FALSE@test-full: |
| 1701 | @CROSSCOMPILING_FALSE@ @(cd tests; $(MAKE) all full-test) |
| 1702 | |
| 1703 | @CROSSCOMPILING_FALSE@test-nonflaky: |
| 1704 | @CROSSCOMPILING_FALSE@ @(cd tests; $(MAKE) all nonflaky-test) |
| 1705 | |
| 1706 | @CROSSCOMPILING_FALSE@test-torture: |
| 1707 | @CROSSCOMPILING_FALSE@ @(cd tests; $(MAKE) all torture-test) |
| 1708 | |
| 1709 | @CROSSCOMPILING_FALSE@test-event: |
| 1710 | @CROSSCOMPILING_FALSE@ @(cd tests; $(MAKE) all event-test) |
| 1711 | |
| 1712 | @CROSSCOMPILING_FALSE@test-am: |
| 1713 | @CROSSCOMPILING_FALSE@ @(cd tests; $(MAKE) all am-test) |
| 1714 | |
| 1715 | @CROSSCOMPILING_FALSE@test-ci: |
| 1716 | @CROSSCOMPILING_FALSE@ @(cd tests; $(MAKE) all ci-test) |
| 1717 | |
| 1718 | examples: |
| 1719 | @(cd docs/examples; $(MAKE) check) |
| 1720 | |
| 1721 | check-docs: |
| 1722 | @(cd docs/libcurl; $(MAKE) check) |
| 1723 | |
| 1724 | # Build source and binary rpms. For rpm-3.0 and above, the ~/.rpmmacros |
| 1725 | # must contain the following line: |
| 1726 | # %_topdir /home/loic/local/rpm |
| 1727 | # and that /home/loic/local/rpm contains the directory SOURCES, BUILD etc. |
| 1728 | # |
| 1729 | # cd /home/loic/local/rpm ; mkdir -p SOURCES BUILD RPMS/i386 SPECS SRPMS |
| 1730 | # |
| 1731 | # If additional configure flags are needed to build the package, add the |
| 1732 | # following in ~/.rpmmacros |
| 1733 | # %configure CFLAGS="%{optflags}" ./configure %{_target_platform} --prefix=%{_prefix} ${AM_CONFIGFLAGS} |
| 1734 | # and run make rpm in the following way: |
| 1735 | # AM_CONFIGFLAGS='--with-uri=/home/users/loic/local/RedHat-6.2' make rpm |
| 1736 | # |
| 1737 | |
| 1738 | rpms: |
| 1739 | $(MAKE) RPMDIST=curl rpm |
| 1740 | $(MAKE) RPMDIST=curl-ssl rpm |
| 1741 | |
| 1742 | rpm: |
| 1743 | RPM_TOPDIR=`rpm --showrc | $(PERL) -n -e 'print if(s/.*_topdir\s+(.*)/$$1/)'` ; \ |
| 1744 | cp $(srcdir)/packages/Linux/RPM/$(RPMDIST).spec $$RPM_TOPDIR/SPECS ; \ |
| 1745 | cp $(PACKAGE)-$(VERSION).tar.gz $$RPM_TOPDIR/SOURCES ; \ |
| 1746 | rpm -ba --clean --rmsource $$RPM_TOPDIR/SPECS/$(RPMDIST).spec ; \ |
| 1747 | mv $$RPM_TOPDIR/RPMS/i386/$(RPMDIST)-*.rpm . ; \ |
| 1748 | mv $$RPM_TOPDIR/SRPMS/$(RPMDIST)-*.src.rpm . |
| 1749 | |
| 1750 | # |
| 1751 | # Build a Solaris pkgadd format file |
| 1752 | # run 'make pkgadd' once you've done './configure' and 'make' to make a Solaris pkgadd format |
| 1753 | # file (which ends up back in this directory). |
| 1754 | # The pkgadd file is in 'pkgtrans' format, so to install on Solaris, do |
| 1755 | # pkgadd -d ./HAXXcurl-* |
| 1756 | # |
| 1757 | |
| 1758 | # gak - libtool requires an absolute directory, hence the pwd below... |
| 1759 | pkgadd: |
| 1760 | umask 022 ; \ |
| 1761 | $(MAKE) install DESTDIR=`/bin/pwd`/packages/Solaris/root ; \ |
| 1762 | cat COPYING > $(srcdir)/packages/Solaris/copyright ; \ |
| 1763 | cd $(srcdir)/packages/Solaris && $(MAKE) package |
| 1764 | |
| 1765 | # |
| 1766 | # Build a cygwin binary tarball installation file |
| 1767 | # resulting .tar.bz2 file will end up at packages/Win32/cygwin |
| 1768 | cygwinbin: |
| 1769 | $(MAKE) -C packages/Win32/cygwin cygwinbin |
| 1770 | |
| 1771 | # We extend the standard install with a custom hook: |
| 1772 | install-data-hook: |
| 1773 | (cd include && $(MAKE) install) |
| 1774 | (cd docs && $(MAKE) install) |
| 1775 | (cd docs/libcurl && $(MAKE) install) |
| 1776 | |
| 1777 | # We extend the standard uninstall with a custom hook: |
| 1778 | uninstall-hook: |
| 1779 | (cd include && $(MAKE) uninstall) |
| 1780 | (cd docs && $(MAKE) uninstall) |
| 1781 | (cd docs/libcurl && $(MAKE) uninstall) |
| 1782 | |
| 1783 | ca-bundle: $(srcdir)/scripts/mk-ca-bundle.pl |
| 1784 | @echo "generating a fresh ca-bundle.crt" |
| 1785 | @perl $(srcdir)/scripts/mk-ca-bundle.pl -b -l -u lib/ca-bundle.crt |
| 1786 | |
| 1787 | ca-firefox: $(srcdir)/scripts/firefox-db2pem.sh |
| 1788 | @echo "generating a fresh ca-bundle.crt" |
| 1789 | $(srcdir)/scripts/firefox-db2pem.sh lib/ca-bundle.crt |
| 1790 | |
| 1791 | checksrc: |
| 1792 | (cd lib && $(MAKE) checksrc) |
| 1793 | (cd src && $(MAKE) checksrc) |
| 1794 | (cd tests && $(MAKE) checksrc) |
| 1795 | (cd include/curl && $(MAKE) checksrc) |
| 1796 | (cd docs/examples && $(MAKE) checksrc) |
| 1797 | (cd packages && $(MAKE) checksrc) |
| 1798 | |
| 1799 | .PHONY: vc-ide |
| 1800 | |
| 1801 | vc-ide: $(VC10_LIBVCXPROJ_DEPS) $(VC10_SRCVCXPROJ_DEPS) \ |
| 1802 | $(VC11_LIBVCXPROJ_DEPS) $(VC11_SRCVCXPROJ_DEPS) $(VC12_LIBVCXPROJ_DEPS) \ |
| 1803 | $(VC12_SRCVCXPROJ_DEPS) $(VC14_LIBVCXPROJ_DEPS) $(VC14_SRCVCXPROJ_DEPS) \ |
| 1804 | $(VC14_10_LIBVCXPROJ_DEPS) $(VC14_10_SRCVCXPROJ_DEPS) \ |
| 1805 | $(VC14_30_LIBVCXPROJ_DEPS) $(VC14_30_SRCVCXPROJ_DEPS) |
| 1806 | @(win32_lib_srcs='$(LIB_CFILES)'; \ |
| 1807 | win32_lib_hdrs='$(LIB_HFILES) config-win32.h'; \ |
| 1808 | win32_lib_rc='$(LIB_RCFILES)'; \ |
| 1809 | win32_lib_vauth_srcs='$(LIB_VAUTH_CFILES)'; \ |
| 1810 | win32_lib_vauth_hdrs='$(LIB_VAUTH_HFILES)'; \ |
| 1811 | win32_lib_vquic_srcs='$(LIB_VQUIC_CFILES)'; \ |
| 1812 | win32_lib_vquic_hdrs='$(LIB_VQUIC_HFILES)'; \ |
| 1813 | win32_lib_vssh_srcs='$(LIB_VSSH_CFILES)'; \ |
| 1814 | win32_lib_vssh_hdrs='$(LIB_VSSH_HFILES)'; \ |
| 1815 | win32_lib_vtls_srcs='$(LIB_VTLS_CFILES)'; \ |
| 1816 | win32_lib_vtls_hdrs='$(LIB_VTLS_HFILES)'; \ |
| 1817 | win32_src_srcs='$(CURL_CFILES)'; \ |
| 1818 | win32_src_hdrs='$(CURL_HFILES)'; \ |
| 1819 | win32_src_rc='$(CURL_RCFILES)'; \ |
| 1820 | win32_src_x_srcs='$(CURLX_CFILES)'; \ |
| 1821 | win32_src_x_hdrs='$(CURLX_HFILES) ../lib/config-win32.h'; \ |
| 1822 | \ |
| 1823 | sorted_lib_srcs=`for file in $$win32_lib_srcs; do echo $$file; done | sort`; \ |
| 1824 | sorted_lib_hdrs=`for file in $$win32_lib_hdrs; do echo $$file; done | sort`; \ |
| 1825 | sorted_lib_vauth_srcs=`for file in $$win32_lib_vauth_srcs; do echo $$file; done | sort`; \ |
| 1826 | sorted_lib_vauth_hdrs=`for file in $$win32_lib_vauth_hdrs; do echo $$file; done | sort`; \ |
| 1827 | sorted_lib_vquic_srcs=`for file in $$win32_lib_vquic_srcs; do echo $$file; done | sort`; \ |
| 1828 | sorted_lib_vquic_hdrs=`for file in $$win32_lib_vquic_hdrs; do echo $$file; done | sort`; \ |
| 1829 | sorted_lib_vssh_srcs=`for file in $$win32_lib_vssh_srcs; do echo $$file; done | sort`; \ |
| 1830 | sorted_lib_vssh_hdrs=`for file in $$win32_lib_vssh_hdrs; do echo $$file; done | sort`; \ |
| 1831 | sorted_lib_vtls_srcs=`for file in $$win32_lib_vtls_srcs; do echo $$file; done | sort`; \ |
| 1832 | sorted_lib_vtls_hdrs=`for file in $$win32_lib_vtls_hdrs; do echo $$file; done | sort`; \ |
| 1833 | sorted_src_srcs=`for file in $$win32_src_srcs; do echo $$file; done | sort`; \ |
| 1834 | sorted_src_hdrs=`for file in $$win32_src_hdrs; do echo $$file; done | sort`; \ |
| 1835 | sorted_src_x_srcs=`for file in $$win32_src_x_srcs; do echo $$file; done | sort`; \ |
| 1836 | sorted_src_x_hdrs=`for file in $$win32_src_x_hdrs; do echo $$file; done | sort`; \ |
| 1837 | \ |
| 1838 | awk_code='\ |
| 1839 | function gen_element(type, dir, file)\ |
| 1840 | {\ |
| 1841 | sub(/vauth\//, "", file);\ |
| 1842 | sub(/vquic\//, "", file);\ |
| 1843 | sub(/vssh\//, "", file);\ |
| 1844 | sub(/vtls\//, "", file);\ |
| 1845 | \ |
| 1846 | spaces=" ";\ |
| 1847 | if(dir == "lib\\vauth" ||\ |
| 1848 | dir == "lib\\vquic" ||\ |
| 1849 | dir == "lib\\vssh" ||\ |
| 1850 | dir == "lib\\vtls")\ |
| 1851 | tabs=" ";\ |
| 1852 | else\ |
| 1853 | tabs=" ";\ |
| 1854 | \ |
| 1855 | if(type == "dsp") {\ |
| 1856 | printf("# Begin Source File\r\n");\ |
| 1857 | printf("\r\n");\ |
| 1858 | printf("SOURCE=..\\..\\..\\..\\%s\\%s\r\n", dir, file);\ |
| 1859 | printf("# End Source File\r\n");\ |
| 1860 | }\ |
| 1861 | else if(type == "vcproj1") {\ |
| 1862 | printf("%s<File\r\n", tabs);\ |
| 1863 | printf("%s RelativePath=\"..\\..\\..\\..\\%s\\%s\">\r\n",\ |
| 1864 | tabs, dir, file);\ |
| 1865 | printf("%s</File>\r\n", tabs);\ |
| 1866 | }\ |
| 1867 | else if(type == "vcproj2") {\ |
| 1868 | printf("%s<File\r\n", tabs);\ |
| 1869 | printf("%s RelativePath=\"..\\..\\..\\..\\%s\\%s\"\r\n",\ |
| 1870 | tabs, dir, file);\ |
| 1871 | printf("%s>\r\n", tabs);\ |
| 1872 | printf("%s</File>\r\n", tabs);\ |
| 1873 | }\ |
| 1874 | else if(type == "vcxproj") {\ |
| 1875 | i = index(file, ".");\ |
| 1876 | ext = substr(file, i == 0 ? 0 : i + 1);\ |
| 1877 | \ |
| 1878 | if(ext == "c")\ |
| 1879 | printf("%s<ClCompile Include=\"..\\..\\..\\..\\%s\\%s\" />\r\n",\ |
| 1880 | spaces, dir, file);\ |
| 1881 | else if(ext == "h")\ |
| 1882 | printf("%s<ClInclude Include=\"..\\..\\..\\..\\%s\\%s\" />\r\n",\ |
| 1883 | spaces, dir, file);\ |
| 1884 | else if(ext == "rc")\ |
| 1885 | printf("%s<ResourceCompile Include=\"..\\..\\..\\..\\%s\\%s\" />\r\n",\ |
| 1886 | spaces, dir, file);\ |
| 1887 | }\ |
| 1888 | }\ |
| 1889 | \ |
| 1890 | {\ |
| 1891 | \ |
| 1892 | if($$0 == "CURL_LIB_C_FILES") {\ |
| 1893 | split(lib_srcs, arr);\ |
| 1894 | for(val in arr) gen_element(proj_type, "lib", arr[val]);\ |
| 1895 | }\ |
| 1896 | else if($$0 == "CURL_LIB_H_FILES") {\ |
| 1897 | split(lib_hdrs, arr);\ |
| 1898 | for(val in arr) gen_element(proj_type, "lib", arr[val]);\ |
| 1899 | }\ |
| 1900 | else if($$0 == "CURL_LIB_RC_FILES") {\ |
| 1901 | split(lib_rc, arr);\ |
| 1902 | for(val in arr) gen_element(proj_type, "lib", arr[val]);\ |
| 1903 | }\ |
| 1904 | else if($$0 == "CURL_LIB_VAUTH_C_FILES") {\ |
| 1905 | split(lib_vauth_srcs, arr);\ |
| 1906 | for(val in arr) gen_element(proj_type, "lib\\vauth", arr[val]);\ |
| 1907 | }\ |
| 1908 | else if($$0 == "CURL_LIB_VAUTH_H_FILES") {\ |
| 1909 | split(lib_vauth_hdrs, arr);\ |
| 1910 | for(val in arr) gen_element(proj_type, "lib\\vauth", arr[val]);\ |
| 1911 | }\ |
| 1912 | else if($$0 == "CURL_LIB_VQUIC_C_FILES") {\ |
| 1913 | split(lib_vquic_srcs, arr);\ |
| 1914 | for(val in arr) gen_element(proj_type, "lib\\vquic", arr[val]);\ |
| 1915 | }\ |
| 1916 | else if($$0 == "CURL_LIB_VQUIC_H_FILES") {\ |
| 1917 | split(lib_vquic_hdrs, arr);\ |
| 1918 | for(val in arr) gen_element(proj_type, "lib\\vquic", arr[val]);\ |
| 1919 | }\ |
| 1920 | else if($$0 == "CURL_LIB_VSSH_C_FILES") {\ |
| 1921 | split(lib_vssh_srcs, arr);\ |
| 1922 | for(val in arr) gen_element(proj_type, "lib\\vssh", arr[val]);\ |
| 1923 | }\ |
| 1924 | else if($$0 == "CURL_LIB_VSSH_H_FILES") {\ |
| 1925 | split(lib_vssh_hdrs, arr);\ |
| 1926 | for(val in arr) gen_element(proj_type, "lib\\vssh", arr[val]);\ |
| 1927 | }\ |
| 1928 | else if($$0 == "CURL_LIB_VTLS_C_FILES") {\ |
| 1929 | split(lib_vtls_srcs, arr);\ |
| 1930 | for(val in arr) gen_element(proj_type, "lib\\vtls", arr[val]);\ |
| 1931 | }\ |
| 1932 | else if($$0 == "CURL_LIB_VTLS_H_FILES") {\ |
| 1933 | split(lib_vtls_hdrs, arr);\ |
| 1934 | for(val in arr) gen_element(proj_type, "lib\\vtls", arr[val]);\ |
| 1935 | }\ |
| 1936 | else if($$0 == "CURL_SRC_C_FILES") {\ |
| 1937 | split(src_srcs, arr);\ |
| 1938 | for(val in arr) gen_element(proj_type, "src", arr[val]);\ |
| 1939 | }\ |
| 1940 | else if($$0 == "CURL_SRC_H_FILES") {\ |
| 1941 | split(src_hdrs, arr);\ |
| 1942 | for(val in arr) gen_element(proj_type, "src", arr[val]);\ |
| 1943 | }\ |
| 1944 | else if($$0 == "CURL_SRC_RC_FILES") {\ |
| 1945 | split(src_rc, arr);\ |
| 1946 | for(val in arr) gen_element(proj_type, "src", arr[val]);\ |
| 1947 | }\ |
| 1948 | else if($$0 == "CURL_SRC_X_C_FILES") {\ |
| 1949 | split(src_x_srcs, arr);\ |
| 1950 | for(val in arr) {\ |
| 1951 | sub(/..\/lib\//, "", arr[val]);\ |
| 1952 | gen_element(proj_type, "lib", arr[val]);\ |
| 1953 | }\ |
| 1954 | }\ |
| 1955 | else if($$0 == "CURL_SRC_X_H_FILES") {\ |
| 1956 | split(src_x_hdrs, arr);\ |
| 1957 | for(val in arr) {\ |
| 1958 | sub(/..\/lib\//, "", arr[val]);\ |
| 1959 | gen_element(proj_type, "lib", arr[val]);\ |
| 1960 | }\ |
| 1961 | }\ |
| 1962 | else\ |
| 1963 | printf("%s\r\n", $$0);\ |
| 1964 | }';\ |
| 1965 | \ |
| 1966 | echo "generating '$(VC10_LIBVCXPROJ)'"; \ |
| 1967 | awk -v proj_type=vcxproj \ |
| 1968 | -v lib_srcs="$$sorted_lib_srcs" \ |
| 1969 | -v lib_hdrs="$$sorted_lib_hdrs" \ |
| 1970 | -v lib_rc="$$win32_lib_rc" \ |
| 1971 | -v lib_vauth_srcs="$$sorted_lib_vauth_srcs" \ |
| 1972 | -v lib_vauth_hdrs="$$sorted_lib_vauth_hdrs" \ |
| 1973 | -v lib_vquic_srcs="$$sorted_lib_vquic_srcs" \ |
| 1974 | -v lib_vquic_hdrs="$$sorted_lib_vquic_hdrs" \ |
| 1975 | -v lib_vssh_srcs="$$sorted_lib_vssh_srcs" \ |
| 1976 | -v lib_vssh_hdrs="$$sorted_lib_vssh_hdrs" \ |
| 1977 | -v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \ |
| 1978 | -v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \ |
| 1979 | "$$awk_code" $(srcdir)/$(VC10_LIBTMPL) > $(VC10_LIBVCXPROJ) || { exit 1; }; \ |
| 1980 | \ |
| 1981 | echo "generating '$(VC10_SRCVCXPROJ)'"; \ |
| 1982 | awk -v proj_type=vcxproj \ |
| 1983 | -v src_srcs="$$sorted_src_srcs" \ |
| 1984 | -v src_hdrs="$$sorted_src_hdrs" \ |
| 1985 | -v src_rc="$$win32_src_rc" \ |
| 1986 | -v src_x_srcs="$$sorted_src_x_srcs" \ |
| 1987 | -v src_x_hdrs="$$sorted_src_x_hdrs" \ |
| 1988 | "$$awk_code" $(srcdir)/$(VC10_SRCTMPL) > $(VC10_SRCVCXPROJ) || { exit 1; }; \ |
| 1989 | \ |
| 1990 | echo "generating '$(VC11_LIBVCXPROJ)'"; \ |
| 1991 | awk -v proj_type=vcxproj \ |
| 1992 | -v lib_srcs="$$sorted_lib_srcs" \ |
| 1993 | -v lib_hdrs="$$sorted_lib_hdrs" \ |
| 1994 | -v lib_rc="$$win32_lib_rc" \ |
| 1995 | -v lib_vauth_srcs="$$sorted_lib_vauth_srcs" \ |
| 1996 | -v lib_vauth_hdrs="$$sorted_lib_vauth_hdrs" \ |
| 1997 | -v lib_vquic_srcs="$$sorted_lib_vquic_srcs" \ |
| 1998 | -v lib_vquic_hdrs="$$sorted_lib_vquic_hdrs" \ |
| 1999 | -v lib_vssh_srcs="$$sorted_lib_vssh_srcs" \ |
| 2000 | -v lib_vssh_hdrs="$$sorted_lib_vssh_hdrs" \ |
| 2001 | -v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \ |
| 2002 | -v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \ |
| 2003 | "$$awk_code" $(srcdir)/$(VC11_LIBTMPL) > $(VC11_LIBVCXPROJ) || { exit 1; }; \ |
| 2004 | \ |
| 2005 | echo "generating '$(VC11_SRCVCXPROJ)'"; \ |
| 2006 | awk -v proj_type=vcxproj \ |
| 2007 | -v src_srcs="$$sorted_src_srcs" \ |
| 2008 | -v src_hdrs="$$sorted_src_hdrs" \ |
| 2009 | -v src_rc="$$win32_src_rc" \ |
| 2010 | -v src_x_srcs="$$sorted_src_x_srcs" \ |
| 2011 | -v src_x_hdrs="$$sorted_src_x_hdrs" \ |
| 2012 | "$$awk_code" $(srcdir)/$(VC11_SRCTMPL) > $(VC11_SRCVCXPROJ) || { exit 1; }; \ |
| 2013 | \ |
| 2014 | echo "generating '$(VC12_LIBVCXPROJ)'"; \ |
| 2015 | awk -v proj_type=vcxproj \ |
| 2016 | -v lib_srcs="$$sorted_lib_srcs" \ |
| 2017 | -v lib_hdrs="$$sorted_lib_hdrs" \ |
| 2018 | -v lib_rc="$$win32_lib_rc" \ |
| 2019 | -v lib_vauth_srcs="$$sorted_lib_vauth_srcs" \ |
| 2020 | -v lib_vauth_hdrs="$$sorted_lib_vauth_hdrs" \ |
| 2021 | -v lib_vquic_srcs="$$sorted_lib_vquic_srcs" \ |
| 2022 | -v lib_vquic_hdrs="$$sorted_lib_vquic_hdrs" \ |
| 2023 | -v lib_vssh_srcs="$$sorted_lib_vssh_srcs" \ |
| 2024 | -v lib_vssh_hdrs="$$sorted_lib_vssh_hdrs" \ |
| 2025 | -v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \ |
| 2026 | -v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \ |
| 2027 | "$$awk_code" $(srcdir)/$(VC12_LIBTMPL) > $(VC12_LIBVCXPROJ) || { exit 1; }; \ |
| 2028 | \ |
| 2029 | echo "generating '$(VC12_SRCVCXPROJ)'"; \ |
| 2030 | awk -v proj_type=vcxproj \ |
| 2031 | -v src_srcs="$$sorted_src_srcs" \ |
| 2032 | -v src_hdrs="$$sorted_src_hdrs" \ |
| 2033 | -v src_rc="$$win32_src_rc" \ |
| 2034 | -v src_x_srcs="$$sorted_src_x_srcs" \ |
| 2035 | -v src_x_hdrs="$$sorted_src_x_hdrs" \ |
| 2036 | "$$awk_code" $(srcdir)/$(VC12_SRCTMPL) > $(VC12_SRCVCXPROJ) || { exit 1; }; \ |
| 2037 | \ |
| 2038 | echo "generating '$(VC14_LIBVCXPROJ)'"; \ |
| 2039 | awk -v proj_type=vcxproj \ |
| 2040 | -v lib_srcs="$$sorted_lib_srcs" \ |
| 2041 | -v lib_hdrs="$$sorted_lib_hdrs" \ |
| 2042 | -v lib_rc="$$win32_lib_rc" \ |
| 2043 | -v lib_vauth_srcs="$$sorted_lib_vauth_srcs" \ |
| 2044 | -v lib_vauth_hdrs="$$sorted_lib_vauth_hdrs" \ |
| 2045 | -v lib_vquic_srcs="$$sorted_lib_vquic_srcs" \ |
| 2046 | -v lib_vquic_hdrs="$$sorted_lib_vquic_hdrs" \ |
| 2047 | -v lib_vssh_srcs="$$sorted_lib_vssh_srcs" \ |
| 2048 | -v lib_vssh_hdrs="$$sorted_lib_vssh_hdrs" \ |
| 2049 | -v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \ |
| 2050 | -v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \ |
| 2051 | "$$awk_code" $(srcdir)/$(VC14_LIBTMPL) > $(VC14_LIBVCXPROJ) || { exit 1; }; \ |
| 2052 | \ |
| 2053 | echo "generating '$(VC14_SRCVCXPROJ)'"; \ |
| 2054 | awk -v proj_type=vcxproj \ |
| 2055 | -v src_srcs="$$sorted_src_srcs" \ |
| 2056 | -v src_hdrs="$$sorted_src_hdrs" \ |
| 2057 | -v src_rc="$$win32_src_rc" \ |
| 2058 | -v src_x_srcs="$$sorted_src_x_srcs" \ |
| 2059 | -v src_x_hdrs="$$sorted_src_x_hdrs" \ |
| 2060 | "$$awk_code" $(srcdir)/$(VC14_SRCTMPL) > $(VC14_SRCVCXPROJ) || { exit 1; }; \ |
| 2061 | \ |
| 2062 | echo "generating '$(VC14_10_LIBVCXPROJ)'"; \ |
| 2063 | awk -v proj_type=vcxproj \ |
| 2064 | -v lib_srcs="$$sorted_lib_srcs" \ |
| 2065 | -v lib_hdrs="$$sorted_lib_hdrs" \ |
| 2066 | -v lib_rc="$$win32_lib_rc" \ |
| 2067 | -v lib_vauth_srcs="$$sorted_lib_vauth_srcs" \ |
| 2068 | -v lib_vauth_hdrs="$$sorted_lib_vauth_hdrs" \ |
| 2069 | -v lib_vquic_srcs="$$sorted_lib_vquic_srcs" \ |
| 2070 | -v lib_vquic_hdrs="$$sorted_lib_vquic_hdrs" \ |
| 2071 | -v lib_vssh_srcs="$$sorted_lib_vssh_srcs" \ |
| 2072 | -v lib_vssh_hdrs="$$sorted_lib_vssh_hdrs" \ |
| 2073 | -v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \ |
| 2074 | -v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \ |
| 2075 | "$$awk_code" $(srcdir)/$(VC14_10_LIBTMPL) > $(VC14_10_LIBVCXPROJ) || { exit 1; }; \ |
| 2076 | \ |
| 2077 | echo "generating '$(VC14_10_SRCVCXPROJ)'"; \ |
| 2078 | awk -v proj_type=vcxproj \ |
| 2079 | -v src_srcs="$$sorted_src_srcs" \ |
| 2080 | -v src_hdrs="$$sorted_src_hdrs" \ |
| 2081 | -v src_rc="$$win32_src_rc" \ |
| 2082 | -v src_x_srcs="$$sorted_src_x_srcs" \ |
| 2083 | -v src_x_hdrs="$$sorted_src_x_hdrs" \ |
| 2084 | "$$awk_code" $(srcdir)/$(VC14_10_SRCTMPL) > $(VC14_10_SRCVCXPROJ) || { exit 1; }; \ |
| 2085 | \ |
| 2086 | echo "generating '$(VC14_30_LIBVCXPROJ)'"; \ |
| 2087 | awk -v proj_type=vcxproj \ |
| 2088 | -v lib_srcs="$$sorted_lib_srcs" \ |
| 2089 | -v lib_hdrs="$$sorted_lib_hdrs" \ |
| 2090 | -v lib_rc="$$win32_lib_rc" \ |
| 2091 | -v lib_vauth_srcs="$$sorted_lib_vauth_srcs" \ |
| 2092 | -v lib_vauth_hdrs="$$sorted_lib_vauth_hdrs" \ |
| 2093 | -v lib_vquic_srcs="$$sorted_lib_vquic_srcs" \ |
| 2094 | -v lib_vquic_hdrs="$$sorted_lib_vquic_hdrs" \ |
| 2095 | -v lib_vssh_srcs="$$sorted_lib_vssh_srcs" \ |
| 2096 | -v lib_vssh_hdrs="$$sorted_lib_vssh_hdrs" \ |
| 2097 | -v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \ |
| 2098 | -v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \ |
| 2099 | "$$awk_code" $(srcdir)/$(VC14_30_LIBTMPL) > $(VC14_30_LIBVCXPROJ) || { exit 1; }; \ |
| 2100 | \ |
| 2101 | echo "generating '$(VC14_30_SRCVCXPROJ)'"; \ |
| 2102 | awk -v proj_type=vcxproj \ |
| 2103 | -v src_srcs="$$sorted_src_srcs" \ |
| 2104 | -v src_hdrs="$$sorted_src_hdrs" \ |
| 2105 | -v src_rc="$$win32_src_rc" \ |
| 2106 | -v src_x_srcs="$$sorted_src_x_srcs" \ |
| 2107 | -v src_x_hdrs="$$sorted_src_x_hdrs" \ |
| 2108 | "$$awk_code" $(srcdir)/$(VC14_30_SRCTMPL) > $(VC14_30_SRCVCXPROJ) || { exit 1; };) |
| 2109 | |
| 2110 | tidy: |
| 2111 | (cd src && $(MAKE) tidy) |
| 2112 | (cd lib && $(MAKE) tidy) |
| 2113 | |
| 2114 | # Tell versions [3.59,3.63) of GNU make to not export all variables. |
| 2115 | # Otherwise a system limit (for SysV at least) may be exceeded. |
| 2116 | .NOEXPORT: |