lh | 9ed821d | 2023-04-07 01:36:19 -0700 | [diff] [blame] | 1 | /* vi: set sw=4 ts=4: */ |
| 2 | /* |
| 3 | * Modprobe written from scratch for BusyBox |
| 4 | * |
| 5 | * Copyright (c) 2008 Timo Teras <timo.teras@iki.fi> |
| 6 | * Copyright (c) 2008 Vladimir Dronnikov |
| 7 | * |
| 8 | * Licensed under GPLv2 or later, see file LICENSE in this source tree. |
| 9 | */ |
| 10 | |
| 11 | //applet:IF_MODPROBE(APPLET(modprobe, BB_DIR_SBIN, BB_SUID_DROP)) |
| 12 | |
| 13 | #include "libbb.h" |
| 14 | #include "modutils.h" |
| 15 | #include <sys/utsname.h> |
| 16 | #include <fnmatch.h> |
| 17 | |
| 18 | //#define DBG(fmt, ...) bb_error_msg("%s: " fmt, __func__, ## __VA_ARGS__) |
| 19 | #define DBG(...) ((void)0) |
| 20 | |
| 21 | /* Note that unlike older versions of modules.dep/depmod (busybox and m-i-t), |
| 22 | * we expect the full dependency list to be specified in modules.dep. |
| 23 | * Older versions would only export the direct dependency list. |
| 24 | */ |
| 25 | |
| 26 | |
| 27 | //usage:#if !ENABLE_MODPROBE_SMALL |
| 28 | //usage:#define modprobe_notes_usage |
| 29 | //usage: "modprobe can (un)load a stack of modules, passing each module options (when\n" |
| 30 | //usage: "loading). modprobe uses a configuration file to determine what option(s) to\n" |
| 31 | //usage: "pass each module it loads.\n" |
| 32 | //usage: "\n" |
| 33 | //usage: "The configuration file is searched (in this order):\n" |
| 34 | //usage: "\n" |
| 35 | //usage: " /etc/modprobe.conf (2.6 only)\n" |
| 36 | //usage: " /etc/modules.conf\n" |
| 37 | //usage: " /etc/conf.modules (deprecated)\n" |
| 38 | //usage: "\n" |
| 39 | //usage: "They all have the same syntax (see below). If none is present, it is\n" |
| 40 | //usage: "_not_ an error; each loaded module is then expected to load without\n" |
| 41 | //usage: "options. Once a file is found, the others are tested for.\n" |
| 42 | //usage: "\n" |
| 43 | //usage: "/etc/modules.conf entry format:\n" |
| 44 | //usage: "\n" |
| 45 | //usage: " alias <alias_name> <mod_name>\n" |
| 46 | //usage: " Makes it possible to modprobe alias_name, when there is no such module.\n" |
| 47 | //usage: " It makes sense if your mod_name is long, or you want a more representative\n" |
| 48 | //usage: " name for that module (eg. 'scsi' in place of 'aha7xxx').\n" |
| 49 | //usage: " This makes it also possible to use a different set of options (below) for\n" |
| 50 | //usage: " the module and the alias.\n" |
| 51 | //usage: " A module can be aliased more than once.\n" |
| 52 | //usage: "\n" |
| 53 | //usage: " options <mod_name|alias_name> <symbol=value...>\n" |
| 54 | //usage: " When loading module mod_name (or the module aliased by alias_name), pass\n" |
| 55 | //usage: " the \"symbol=value\" pairs as option to that module.\n" |
| 56 | //usage: "\n" |
| 57 | //usage: "Sample /etc/modules.conf file:\n" |
| 58 | //usage: "\n" |
| 59 | //usage: " options tulip irq=3\n" |
| 60 | //usage: " alias tulip tulip2\n" |
| 61 | //usage: " options tulip2 irq=4 io=0x308\n" |
| 62 | //usage: "\n" |
| 63 | //usage: "Other functionality offered by 'classic' modprobe is not available in\n" |
| 64 | //usage: "this implementation.\n" |
| 65 | //usage: "\n" |
| 66 | //usage: "If module options are present both in the config file, and on the command line,\n" |
| 67 | //usage: "then the options from the command line will be passed to the module _after_\n" |
| 68 | //usage: "the options from the config file. That way, you can have defaults in the config\n" |
| 69 | //usage: "file, and override them for a specific usage from the command line.\n" |
| 70 | //usage:#define modprobe_example_usage |
| 71 | //usage: "(with the above /etc/modules.conf):\n\n" |
| 72 | //usage: "$ modprobe tulip\n" |
| 73 | //usage: " will load the module 'tulip' with default option 'irq=3'\n\n" |
| 74 | //usage: "$ modprobe tulip irq=5\n" |
| 75 | //usage: " will load the module 'tulip' with option 'irq=5', thus overriding the default\n\n" |
| 76 | //usage: "$ modprobe tulip2\n" |
| 77 | //usage: " will load the module 'tulip' with default options 'irq=4 io=0x308',\n" |
| 78 | //usage: " which are the default for alias 'tulip2'\n\n" |
| 79 | //usage: "$ modprobe tulip2 irq=8\n" |
| 80 | //usage: " will load the module 'tulip' with default options 'irq=4 io=0x308 irq=8',\n" |
| 81 | //usage: " which are the default for alias 'tulip2' overridden by the option 'irq=8'\n\n" |
| 82 | //usage: " from the command line\n\n" |
| 83 | //usage: "$ modprobe tulip2 irq=2 io=0x210\n" |
| 84 | //usage: " will load the module 'tulip' with default options 'irq=4 io=0x308 irq=4 io=0x210',\n" |
| 85 | //usage: " which are the default for alias 'tulip2' overridden by the options 'irq=2 io=0x210'\n\n" |
| 86 | //usage: " from the command line\n" |
| 87 | //usage: |
| 88 | //usage:#define modprobe_trivial_usage |
| 89 | //usage: "[-alrqvsD" IF_FEATURE_MODPROBE_BLACKLIST("b") "]" |
| 90 | //usage: " MODULE [symbol=value]..." |
| 91 | //usage:#define modprobe_full_usage "\n\n" |
| 92 | //usage: " -a Load multiple MODULEs" |
| 93 | //usage: "\n -l List (MODULE is a pattern)" |
| 94 | //usage: "\n -r Remove MODULE (stacks) or do autoclean" |
| 95 | //usage: "\n -q Quiet" |
| 96 | //usage: "\n -v Verbose" |
| 97 | //usage: "\n -s Log to syslog" |
| 98 | //usage: "\n -D Show dependencies" |
| 99 | //usage: IF_FEATURE_MODPROBE_BLACKLIST( |
| 100 | //usage: "\n -b Apply blacklist to module names too" |
| 101 | //usage: ) |
| 102 | //usage:#endif /* !ENABLE_MODPROBE_SMALL */ |
| 103 | |
| 104 | /* Note: usage text doesn't document various 2.4 options |
| 105 | * we pull in through INSMOD_OPTS define |
| 106 | * Note2: -b is always accepted, but if !FEATURE_MODPROBE_BLACKLIST, |
| 107 | * it is a no-op. |
| 108 | */ |
| 109 | #define MODPROBE_OPTS "alrDb" |
| 110 | /* -a and -D _are_ in fact compatible */ |
| 111 | #define MODPROBE_COMPLEMENTARY ("q-v:v-q:l--arD:r--alD:a--lr:D--rl") |
| 112 | //#define MODPROBE_OPTS "acd:lnrt:C:b" |
| 113 | //#define MODPROBE_COMPLEMENTARY "q-v:v-q:l--acr:a--lr:r--al" |
| 114 | enum { |
| 115 | OPT_INSERT_ALL = (INSMOD_OPT_UNUSED << 0), /* a */ |
| 116 | //OPT_DUMP_ONLY = (INSMOD_OPT_UNUSED << x), /* c */ |
| 117 | //OPT_DIRNAME = (INSMOD_OPT_UNUSED << x), /* d */ |
| 118 | OPT_LIST_ONLY = (INSMOD_OPT_UNUSED << 1), /* l */ |
| 119 | //OPT_SHOW_ONLY = (INSMOD_OPT_UNUSED << x), /* n */ |
| 120 | OPT_REMOVE = (INSMOD_OPT_UNUSED << 2), /* r */ |
| 121 | //OPT_RESTRICT = (INSMOD_OPT_UNUSED << x), /* t */ |
| 122 | //OPT_VERONLY = (INSMOD_OPT_UNUSED << x), /* V */ |
| 123 | //OPT_CONFIGFILE = (INSMOD_OPT_UNUSED << x), /* C */ |
| 124 | OPT_SHOW_DEPS = (INSMOD_OPT_UNUSED << 3), /* D */ |
| 125 | OPT_BLACKLIST = (INSMOD_OPT_UNUSED << 4) * ENABLE_FEATURE_MODPROBE_BLACKLIST, |
| 126 | }; |
| 127 | #if ENABLE_LONG_OPTS |
| 128 | static const char modprobe_longopts[] ALIGN1 = |
| 129 | /* nobody asked for long opts (yet) */ |
| 130 | // "all\0" No_argument "a" |
| 131 | // "list\0" No_argument "l" |
| 132 | // "remove\0" No_argument "r" |
| 133 | // "quiet\0" No_argument "q" |
| 134 | // "verbose\0" No_argument "v" |
| 135 | // "syslog\0" No_argument "s" |
| 136 | /* module-init-tools 3.11.1 has only long opt --show-depends |
| 137 | * but no short -D, we provide long opt for scripts which |
| 138 | * were written for 3.11.1: */ |
| 139 | "show-depends\0" No_argument "D" |
| 140 | // "use-blacklist\0" No_argument "b" |
| 141 | ; |
| 142 | #endif |
| 143 | |
| 144 | #define MODULE_FLAG_LOADED 0x0001 |
| 145 | #define MODULE_FLAG_NEED_DEPS 0x0002 |
| 146 | /* "was seen in modules.dep": */ |
| 147 | #define MODULE_FLAG_FOUND_IN_MODDEP 0x0004 |
| 148 | #define MODULE_FLAG_BLACKLISTED 0x0008 |
| 149 | |
| 150 | struct module_entry { /* I'll call it ME. */ |
| 151 | unsigned flags; |
| 152 | char *modname; /* stripped of /path/, .ext and s/-/_/g */ |
| 153 | const char *probed_name; /* verbatim as seen on cmdline */ |
| 154 | char *options; /* options from config files */ |
| 155 | llist_t *realnames; /* strings. if this module is an alias, */ |
| 156 | /* real module name is one of these. */ |
| 157 | //Can there really be more than one? Example from real kernel? |
| 158 | llist_t *deps; /* strings. modules we depend on */ |
| 159 | }; |
| 160 | |
| 161 | #define DB_HASH_SIZE 256 |
| 162 | |
| 163 | struct globals { |
| 164 | llist_t *probes; /* MEs of module(s) requested on cmdline */ |
| 165 | char *cmdline_mopts; /* module options from cmdline */ |
| 166 | int num_unresolved_deps; |
| 167 | /* bool. "Did we have 'symbol:FOO' requested on cmdline?" */ |
| 168 | smallint need_symbols; |
| 169 | struct utsname uts; |
| 170 | llist_t *db[DB_HASH_SIZE]; /* MEs of all modules ever seen (caching for speed) */ |
| 171 | } FIX_ALIASING; |
| 172 | #define G (*ptr_to_globals) |
| 173 | #define INIT_G() do { \ |
| 174 | SET_PTR_TO_GLOBALS(xzalloc(sizeof(G))); \ |
| 175 | } while (0) |
| 176 | |
| 177 | |
| 178 | static int read_config(const char *path); |
| 179 | |
| 180 | static char *gather_options_str(char *opts, const char *append) |
| 181 | { |
| 182 | /* Speed-optimized. We call gather_options_str many times. */ |
| 183 | if (append) { |
| 184 | if (opts == NULL) { |
| 185 | opts = xstrdup(append); |
| 186 | } else { |
| 187 | int optlen = strlen(opts); |
| 188 | opts = xrealloc(opts, optlen + strlen(append) + 2); |
| 189 | sprintf(opts + optlen, " %s", append); |
| 190 | } |
| 191 | } |
| 192 | return opts; |
| 193 | } |
| 194 | |
| 195 | /* These three functions called many times, optimizing for speed. |
| 196 | * Users reported minute-long delays when they runn iptables repeatedly |
| 197 | * (iptables use modprobe to install needed kernel modules). |
| 198 | */ |
| 199 | static struct module_entry *helper_get_module(const char *module, int create) |
| 200 | { |
| 201 | char modname[MODULE_NAME_LEN]; |
| 202 | struct module_entry *e; |
| 203 | llist_t *l; |
| 204 | unsigned i; |
| 205 | unsigned hash; |
| 206 | |
| 207 | filename2modname(module, modname); |
| 208 | |
| 209 | hash = 0; |
| 210 | for (i = 0; modname[i]; i++) |
| 211 | hash = ((hash << 5) + hash) + modname[i]; |
| 212 | hash %= DB_HASH_SIZE; |
| 213 | |
| 214 | for (l = G.db[hash]; l; l = l->link) { |
| 215 | e = (struct module_entry *) l->data; |
| 216 | if (strcmp(e->modname, modname) == 0) |
| 217 | return e; |
| 218 | } |
| 219 | if (!create) |
| 220 | return NULL; |
| 221 | |
| 222 | e = xzalloc(sizeof(*e)); |
| 223 | e->modname = xstrdup(modname); |
| 224 | llist_add_to(&G.db[hash], e); |
| 225 | |
| 226 | return e; |
| 227 | } |
| 228 | static ALWAYS_INLINE struct module_entry *get_or_add_modentry(const char *module) |
| 229 | { |
| 230 | return helper_get_module(module, 1); |
| 231 | } |
| 232 | static ALWAYS_INLINE struct module_entry *get_modentry(const char *module) |
| 233 | { |
| 234 | return helper_get_module(module, 0); |
| 235 | } |
| 236 | |
| 237 | static void add_probe(const char *name) |
| 238 | { |
| 239 | struct module_entry *m; |
| 240 | |
| 241 | m = get_or_add_modentry(name); |
| 242 | if (!(option_mask32 & (OPT_REMOVE | OPT_SHOW_DEPS)) |
| 243 | && (m->flags & MODULE_FLAG_LOADED) |
| 244 | ) { |
| 245 | DBG("skipping %s, it is already loaded", name); |
| 246 | return; |
| 247 | } |
| 248 | |
| 249 | DBG("queuing %s", name); |
| 250 | m->probed_name = name; |
| 251 | m->flags |= MODULE_FLAG_NEED_DEPS; |
| 252 | llist_add_to_end(&G.probes, m); |
| 253 | G.num_unresolved_deps++; |
| 254 | if (ENABLE_FEATURE_MODUTILS_SYMBOLS |
| 255 | && strncmp(m->modname, "symbol:", 7) == 0 |
| 256 | ) { |
| 257 | G.need_symbols = 1; |
| 258 | } |
| 259 | } |
| 260 | |
| 261 | static int FAST_FUNC config_file_action(const char *filename, |
| 262 | struct stat *statbuf UNUSED_PARAM, |
| 263 | void *userdata UNUSED_PARAM, |
| 264 | int depth UNUSED_PARAM) |
| 265 | { |
| 266 | char *tokens[3]; |
| 267 | parser_t *p; |
| 268 | struct module_entry *m; |
| 269 | int rc = TRUE; |
| 270 | |
| 271 | if (bb_basename(filename)[0] == '.') |
| 272 | goto error; |
| 273 | |
| 274 | p = config_open2(filename, fopen_for_read); |
| 275 | if (p == NULL) { |
| 276 | rc = FALSE; |
| 277 | goto error; |
| 278 | } |
| 279 | |
| 280 | while (config_read(p, tokens, 3, 2, "# \t", PARSE_NORMAL)) { |
| 281 | //Use index_in_strings? |
| 282 | if (strcmp(tokens[0], "alias") == 0) { |
| 283 | /* alias <wildcard> <modulename> */ |
| 284 | llist_t *l; |
| 285 | char wildcard[MODULE_NAME_LEN]; |
| 286 | char *rmod; |
| 287 | |
| 288 | if (tokens[2] == NULL) |
| 289 | continue; |
| 290 | filename2modname(tokens[1], wildcard); |
| 291 | |
| 292 | for (l = G.probes; l; l = l->link) { |
| 293 | m = (struct module_entry *) l->data; |
| 294 | if (fnmatch(wildcard, m->modname, 0) != 0) |
| 295 | continue; |
| 296 | rmod = filename2modname(tokens[2], NULL); |
| 297 | llist_add_to(&m->realnames, rmod); |
| 298 | |
| 299 | if (m->flags & MODULE_FLAG_NEED_DEPS) { |
| 300 | m->flags &= ~MODULE_FLAG_NEED_DEPS; |
| 301 | G.num_unresolved_deps--; |
| 302 | } |
| 303 | |
| 304 | m = get_or_add_modentry(rmod); |
| 305 | if (!(m->flags & MODULE_FLAG_NEED_DEPS)) { |
| 306 | m->flags |= MODULE_FLAG_NEED_DEPS; |
| 307 | G.num_unresolved_deps++; |
| 308 | } |
| 309 | } |
| 310 | } else if (strcmp(tokens[0], "options") == 0) { |
| 311 | /* options <modulename> <option...> */ |
| 312 | if (tokens[2] == NULL) |
| 313 | continue; |
| 314 | m = get_or_add_modentry(tokens[1]); |
| 315 | m->options = gather_options_str(m->options, tokens[2]); |
| 316 | } else if (strcmp(tokens[0], "include") == 0) { |
| 317 | /* include <filename> */ |
| 318 | read_config(tokens[1]); |
| 319 | } else if (ENABLE_FEATURE_MODPROBE_BLACKLIST |
| 320 | && strcmp(tokens[0], "blacklist") == 0 |
| 321 | ) { |
| 322 | /* blacklist <modulename> */ |
| 323 | get_or_add_modentry(tokens[1])->flags |= MODULE_FLAG_BLACKLISTED; |
| 324 | } |
| 325 | } |
| 326 | config_close(p); |
| 327 | error: |
| 328 | return rc; |
| 329 | } |
| 330 | |
| 331 | static int read_config(const char *path) |
| 332 | { |
| 333 | return recursive_action(path, ACTION_RECURSE | ACTION_QUIET, |
| 334 | config_file_action, NULL, NULL, 1); |
| 335 | } |
| 336 | |
| 337 | static const char *humanly_readable_name(struct module_entry *m) |
| 338 | { |
| 339 | /* probed_name may be NULL. modname always exists. */ |
| 340 | return m->probed_name ? m->probed_name : m->modname; |
| 341 | } |
| 342 | |
| 343 | static char *parse_and_add_kcmdline_module_options(char *options, const char *modulename) |
| 344 | { |
| 345 | char *kcmdline_buf; |
| 346 | char *kcmdline; |
| 347 | char *kptr; |
| 348 | int len; |
| 349 | |
| 350 | kcmdline_buf = xmalloc_open_read_close("/proc/cmdline", NULL); |
| 351 | if (!kcmdline_buf) |
| 352 | return options; |
| 353 | |
| 354 | kcmdline = kcmdline_buf; |
| 355 | len = strlen(modulename); |
| 356 | while ((kptr = strsep(&kcmdline, "\n\t ")) != NULL) { |
| 357 | if (strncmp(modulename, kptr, len) != 0) |
| 358 | continue; |
| 359 | kptr += len; |
| 360 | if (*kptr != '.') |
| 361 | continue; |
| 362 | /* It is "modulename.xxxx" */ |
| 363 | kptr++; |
| 364 | if (strchr(kptr, '=') != NULL) { |
| 365 | /* It is "modulename.opt=[val]" */ |
| 366 | options = gather_options_str(options, kptr); |
| 367 | } |
| 368 | } |
| 369 | free(kcmdline_buf); |
| 370 | |
| 371 | return options; |
| 372 | } |
| 373 | |
| 374 | /* Return: similar to bb_init_module: |
| 375 | * 0 on success, |
| 376 | * -errno on open/read error, |
| 377 | * errno on init_module() error |
| 378 | */ |
| 379 | /* NB: INSMOD_OPT_SILENT bit suppresses ONLY non-existent modules, |
| 380 | * not deleted ones (those are still listed in modules.dep). |
| 381 | * module-init-tools version 3.4: |
| 382 | * # modprobe bogus |
| 383 | * FATAL: Module bogus not found. [exitcode 1] |
| 384 | * # modprobe -q bogus [silent, exitcode still 1] |
| 385 | * but: |
| 386 | * # rm kernel/drivers/net/dummy.ko |
| 387 | * # modprobe -q dummy |
| 388 | * FATAL: Could not open '/lib/modules/xxx/kernel/drivers/net/dummy.ko': No such file or directory |
| 389 | * [exitcode 1] |
| 390 | */ |
| 391 | static int do_modprobe(struct module_entry *m) |
| 392 | { |
| 393 | int rc, first; |
| 394 | |
| 395 | if (!(m->flags & MODULE_FLAG_FOUND_IN_MODDEP)) { |
| 396 | if (!(option_mask32 & INSMOD_OPT_SILENT)) |
| 397 | bb_error_msg("module %s not found in modules.dep", |
| 398 | humanly_readable_name(m)); |
| 399 | return -ENOENT; |
| 400 | } |
| 401 | DBG("do_modprob'ing %s", m->modname); |
| 402 | |
| 403 | if (!(option_mask32 & OPT_REMOVE)) |
| 404 | m->deps = llist_rev(m->deps); |
| 405 | |
| 406 | if (0) { |
| 407 | llist_t *l; |
| 408 | for (l = m->deps; l; l = l->link) |
| 409 | DBG("dep: %s", l->data); |
| 410 | } |
| 411 | |
| 412 | first = 1; |
| 413 | rc = 0; |
| 414 | while (m->deps) { |
| 415 | struct module_entry *m2; |
| 416 | char *fn, *options; |
| 417 | |
| 418 | rc = 0; |
| 419 | fn = llist_pop(&m->deps); /* we leak it */ |
| 420 | m2 = get_or_add_modentry(fn); |
| 421 | |
| 422 | if (option_mask32 & OPT_REMOVE) { |
| 423 | /* modprobe -r */ |
| 424 | if (m2->flags & MODULE_FLAG_LOADED) { |
| 425 | rc = bb_delete_module(m2->modname, O_EXCL); |
| 426 | if (rc) { |
| 427 | if (first) { |
| 428 | bb_error_msg("can't unload module %s: %s", |
| 429 | humanly_readable_name(m2), |
| 430 | moderror(rc)); |
| 431 | break; |
| 432 | } |
| 433 | } else { |
| 434 | m2->flags &= ~MODULE_FLAG_LOADED; |
| 435 | } |
| 436 | } |
| 437 | /* do not error out if *deps* fail to unload */ |
| 438 | first = 0; |
| 439 | continue; |
| 440 | } |
| 441 | |
| 442 | options = m2->options; |
| 443 | m2->options = NULL; |
| 444 | options = parse_and_add_kcmdline_module_options(options, m2->modname); |
| 445 | if (m == m2) |
| 446 | options = gather_options_str(options, G.cmdline_mopts); |
| 447 | |
| 448 | if (option_mask32 & OPT_SHOW_DEPS) { |
| 449 | printf(options ? "insmod %s/%s/%s %s\n" |
| 450 | : "insmod %s/%s/%s\n", |
| 451 | CONFIG_DEFAULT_MODULES_DIR, G.uts.release, fn, |
| 452 | options); |
| 453 | free(options); |
| 454 | continue; |
| 455 | } |
| 456 | |
| 457 | if (m2->flags & MODULE_FLAG_LOADED) { |
| 458 | DBG("%s is already loaded, skipping", fn); |
| 459 | free(options); |
| 460 | continue; |
| 461 | } |
| 462 | |
| 463 | rc = bb_init_module(fn, options); |
| 464 | DBG("loaded %s '%s', rc:%d", fn, options, rc); |
| 465 | if (rc == EEXIST) |
| 466 | rc = 0; |
| 467 | free(options); |
| 468 | if (rc) { |
| 469 | bb_error_msg("can't load module %s (%s): %s", |
| 470 | humanly_readable_name(m2), |
| 471 | fn, |
| 472 | moderror(rc) |
| 473 | ); |
| 474 | break; |
| 475 | } |
| 476 | m2->flags |= MODULE_FLAG_LOADED; |
| 477 | } |
| 478 | |
| 479 | return rc; |
| 480 | } |
| 481 | |
| 482 | static void load_modules_dep(void) |
| 483 | { |
| 484 | struct module_entry *m; |
| 485 | char *colon, *tokens[2]; |
| 486 | parser_t *p; |
| 487 | |
| 488 | /* Modprobe does not work at all without modules.dep, |
| 489 | * even if the full module name is given. Returning error here |
| 490 | * was making us later confuse user with this message: |
| 491 | * "module /full/path/to/existing/file/module.ko not found". |
| 492 | * It's better to die immediately, with good message. |
| 493 | * xfopen_for_read provides that. */ |
| 494 | p = config_open2(CONFIG_DEFAULT_DEPMOD_FILE, xfopen_for_read); |
| 495 | |
| 496 | while (G.num_unresolved_deps |
| 497 | && config_read(p, tokens, 2, 1, "# \t", PARSE_NORMAL) |
| 498 | ) { |
| 499 | colon = last_char_is(tokens[0], ':'); |
| 500 | if (colon == NULL) |
| 501 | continue; |
| 502 | *colon = 0; |
| 503 | |
| 504 | m = get_modentry(tokens[0]); |
| 505 | if (m == NULL) |
| 506 | continue; |
| 507 | |
| 508 | /* Optimization... */ |
| 509 | if ((m->flags & MODULE_FLAG_LOADED) |
| 510 | && !(option_mask32 & (OPT_REMOVE | OPT_SHOW_DEPS)) |
| 511 | ) { |
| 512 | DBG("skip deps of %s, it's already loaded", tokens[0]); |
| 513 | continue; |
| 514 | } |
| 515 | |
| 516 | m->flags |= MODULE_FLAG_FOUND_IN_MODDEP; |
| 517 | if ((m->flags & MODULE_FLAG_NEED_DEPS) && (m->deps == NULL)) { |
| 518 | G.num_unresolved_deps--; |
| 519 | llist_add_to(&m->deps, xstrdup(tokens[0])); |
| 520 | if (tokens[1]) |
| 521 | string_to_llist(tokens[1], &m->deps, " \t"); |
| 522 | } else |
| 523 | DBG("skipping dep line"); |
| 524 | } |
| 525 | config_close(p); |
| 526 | } |
| 527 | |
| 528 | int modprobe_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE; |
| 529 | int modprobe_main(int argc UNUSED_PARAM, char **argv) |
| 530 | { |
| 531 | int rc; |
| 532 | unsigned opt; |
| 533 | struct module_entry *me; |
| 534 | |
| 535 | INIT_G(); |
| 536 | |
| 537 | IF_LONG_OPTS(applet_long_options = modprobe_longopts;) |
| 538 | opt_complementary = MODPROBE_COMPLEMENTARY; |
| 539 | opt = getopt32(argv, INSMOD_OPTS MODPROBE_OPTS INSMOD_ARGS); |
| 540 | argv += optind; |
| 541 | |
| 542 | /* Goto modules location */ |
| 543 | xchdir(CONFIG_DEFAULT_MODULES_DIR); |
| 544 | uname(&G.uts); |
| 545 | xchdir(G.uts.release); |
| 546 | |
| 547 | if (opt & OPT_LIST_ONLY) { |
| 548 | int i; |
| 549 | char name[MODULE_NAME_LEN]; |
| 550 | char *colon, *tokens[2]; |
| 551 | parser_t *p = config_open2(CONFIG_DEFAULT_DEPMOD_FILE, xfopen_for_read); |
| 552 | |
| 553 | for (i = 0; argv[i]; i++) |
| 554 | replace(argv[i], '-', '_'); |
| 555 | |
| 556 | while (config_read(p, tokens, 2, 1, "# \t", PARSE_NORMAL)) { |
| 557 | colon = last_char_is(tokens[0], ':'); |
| 558 | if (!colon) |
| 559 | continue; |
| 560 | *colon = '\0'; |
| 561 | filename2modname(tokens[0], name); |
| 562 | if (!argv[0]) |
| 563 | puts(tokens[0]); |
| 564 | else { |
| 565 | for (i = 0; argv[i]; i++) { |
| 566 | if (fnmatch(argv[i], name, 0) == 0) { |
| 567 | puts(tokens[0]); |
| 568 | } |
| 569 | } |
| 570 | } |
| 571 | } |
| 572 | return EXIT_SUCCESS; |
| 573 | } |
| 574 | |
| 575 | /* Yes, for some reason -l ignores -s... */ |
| 576 | if (opt & INSMOD_OPT_SYSLOG) |
| 577 | logmode = LOGMODE_SYSLOG; |
| 578 | |
| 579 | if (!argv[0]) { |
| 580 | if (opt & OPT_REMOVE) { |
| 581 | /* "modprobe -r" (w/o params). |
| 582 | * "If name is NULL, all unused modules marked |
| 583 | * autoclean will be removed". |
| 584 | */ |
| 585 | if (bb_delete_module(NULL, O_NONBLOCK | O_EXCL) != 0) |
| 586 | bb_perror_msg_and_die("rmmod"); |
| 587 | } |
| 588 | return EXIT_SUCCESS; |
| 589 | } |
| 590 | |
| 591 | /* Retrieve module names of already loaded modules */ |
| 592 | { |
| 593 | char *s; |
| 594 | parser_t *parser = config_open2("/proc/modules", fopen_for_read); |
| 595 | while (config_read(parser, &s, 1, 1, "# \t", PARSE_NORMAL & ~PARSE_GREEDY)) |
| 596 | get_or_add_modentry(s)->flags |= MODULE_FLAG_LOADED; |
| 597 | config_close(parser); |
| 598 | } |
| 599 | |
| 600 | if (opt & (OPT_INSERT_ALL | OPT_REMOVE)) { |
| 601 | /* Each argument is a module name */ |
| 602 | do { |
| 603 | DBG("adding module %s", *argv); |
| 604 | add_probe(*argv++); |
| 605 | } while (*argv); |
| 606 | } else { |
| 607 | /* First argument is module name, rest are parameters */ |
| 608 | DBG("probing just module %s", *argv); |
| 609 | add_probe(argv[0]); |
| 610 | G.cmdline_mopts = parse_cmdline_module_options(argv, /*quote_spaces:*/ 1); |
| 611 | } |
| 612 | |
| 613 | /* Happens if all requested modules are already loaded */ |
| 614 | if (G.probes == NULL) |
| 615 | return EXIT_SUCCESS; |
| 616 | |
| 617 | read_config("/etc/modprobe.conf"); |
| 618 | read_config("/etc/modprobe.d"); |
| 619 | if (ENABLE_FEATURE_MODUTILS_SYMBOLS && G.need_symbols) |
| 620 | read_config("modules.symbols"); |
| 621 | load_modules_dep(); |
| 622 | if (ENABLE_FEATURE_MODUTILS_ALIAS && G.num_unresolved_deps) { |
| 623 | read_config("modules.alias"); |
| 624 | load_modules_dep(); |
| 625 | } |
| 626 | |
| 627 | rc = 0; |
| 628 | while ((me = llist_pop(&G.probes)) != NULL) { |
| 629 | if (me->realnames == NULL) { |
| 630 | DBG("probing by module name"); |
| 631 | /* This is not an alias. Literal names are blacklisted |
| 632 | * only if '-b' is given. |
| 633 | */ |
| 634 | if (!(opt & OPT_BLACKLIST) |
| 635 | || !(me->flags & MODULE_FLAG_BLACKLISTED) |
| 636 | ) { |
| 637 | rc |= do_modprobe(me); |
| 638 | } |
| 639 | continue; |
| 640 | } |
| 641 | |
| 642 | /* Probe all real names for the alias */ |
| 643 | do { |
| 644 | char *realname = llist_pop(&me->realnames); |
| 645 | struct module_entry *m2; |
| 646 | |
| 647 | DBG("probing alias %s by realname %s", me->modname, realname); |
| 648 | m2 = get_or_add_modentry(realname); |
| 649 | if (!(m2->flags & MODULE_FLAG_BLACKLISTED) |
| 650 | && (!(m2->flags & MODULE_FLAG_LOADED) |
| 651 | || (opt & (OPT_REMOVE | OPT_SHOW_DEPS))) |
| 652 | ) { |
| 653 | //TODO: we can pass "me" as 2nd param to do_modprobe, |
| 654 | //and make do_modprobe emit more meaningful error messages |
| 655 | //with alias name included, not just module name alias resolves to. |
| 656 | rc |= do_modprobe(m2); |
| 657 | } |
| 658 | free(realname); |
| 659 | } while (me->realnames != NULL); |
| 660 | } |
| 661 | |
| 662 | return (rc != 0); |
| 663 | } |