| lh | 9ed821d | 2023-04-07 01:36:19 -0700 | [diff] [blame] | 1 | /* | 
|  | 2 | * HID driver for Nintendo Wiimote extension devices | 
|  | 3 | * Copyright (c) 2011 David Herrmann | 
|  | 4 | */ | 
|  | 5 |  | 
|  | 6 | /* | 
|  | 7 | * This program is free software; you can redistribute it and/or modify it | 
|  | 8 | * under the terms of the GNU General Public License as published by the Free | 
|  | 9 | * Software Foundation; either version 2 of the License, or (at your option) | 
|  | 10 | * any later version. | 
|  | 11 | */ | 
|  | 12 |  | 
|  | 13 | #include <linux/atomic.h> | 
|  | 14 | #include <linux/module.h> | 
|  | 15 | #include <linux/spinlock.h> | 
|  | 16 | #include <linux/workqueue.h> | 
|  | 17 | #include "hid-wiimote.h" | 
|  | 18 |  | 
|  | 19 | struct wiimote_ext { | 
|  | 20 | struct wiimote_data *wdata; | 
|  | 21 | struct work_struct worker; | 
|  | 22 | struct input_dev *input; | 
|  | 23 | struct input_dev *mp_input; | 
|  | 24 |  | 
|  | 25 | atomic_t opened; | 
|  | 26 | atomic_t mp_opened; | 
|  | 27 | bool plugged; | 
|  | 28 | bool mp_plugged; | 
|  | 29 | bool motionp; | 
|  | 30 | __u8 ext_type; | 
|  | 31 | }; | 
|  | 32 |  | 
|  | 33 | enum wiiext_type { | 
|  | 34 | WIIEXT_NONE,		/* placeholder */ | 
|  | 35 | WIIEXT_CLASSIC,		/* Nintendo classic controller */ | 
|  | 36 | WIIEXT_NUNCHUCK,	/* Nintendo nunchuck controller */ | 
|  | 37 | }; | 
|  | 38 |  | 
|  | 39 | enum wiiext_keys { | 
|  | 40 | WIIEXT_KEY_C, | 
|  | 41 | WIIEXT_KEY_Z, | 
|  | 42 | WIIEXT_KEY_A, | 
|  | 43 | WIIEXT_KEY_B, | 
|  | 44 | WIIEXT_KEY_X, | 
|  | 45 | WIIEXT_KEY_Y, | 
|  | 46 | WIIEXT_KEY_ZL, | 
|  | 47 | WIIEXT_KEY_ZR, | 
|  | 48 | WIIEXT_KEY_PLUS, | 
|  | 49 | WIIEXT_KEY_MINUS, | 
|  | 50 | WIIEXT_KEY_HOME, | 
|  | 51 | WIIEXT_KEY_LEFT, | 
|  | 52 | WIIEXT_KEY_RIGHT, | 
|  | 53 | WIIEXT_KEY_UP, | 
|  | 54 | WIIEXT_KEY_DOWN, | 
|  | 55 | WIIEXT_KEY_LT, | 
|  | 56 | WIIEXT_KEY_RT, | 
|  | 57 | WIIEXT_KEY_COUNT | 
|  | 58 | }; | 
|  | 59 |  | 
|  | 60 | static __u16 wiiext_keymap[] = { | 
|  | 61 | BTN_C,		/* WIIEXT_KEY_C */ | 
|  | 62 | BTN_Z,		/* WIIEXT_KEY_Z */ | 
|  | 63 | BTN_A,		/* WIIEXT_KEY_A */ | 
|  | 64 | BTN_B,		/* WIIEXT_KEY_B */ | 
|  | 65 | BTN_X,		/* WIIEXT_KEY_X */ | 
|  | 66 | BTN_Y,		/* WIIEXT_KEY_Y */ | 
|  | 67 | BTN_TL2,	/* WIIEXT_KEY_ZL */ | 
|  | 68 | BTN_TR2,	/* WIIEXT_KEY_ZR */ | 
|  | 69 | KEY_NEXT,	/* WIIEXT_KEY_PLUS */ | 
|  | 70 | KEY_PREVIOUS,	/* WIIEXT_KEY_MINUS */ | 
|  | 71 | BTN_MODE,	/* WIIEXT_KEY_HOME */ | 
|  | 72 | KEY_LEFT,	/* WIIEXT_KEY_LEFT */ | 
|  | 73 | KEY_RIGHT,	/* WIIEXT_KEY_RIGHT */ | 
|  | 74 | KEY_UP,		/* WIIEXT_KEY_UP */ | 
|  | 75 | KEY_DOWN,	/* WIIEXT_KEY_DOWN */ | 
|  | 76 | BTN_TL,		/* WIIEXT_KEY_LT */ | 
|  | 77 | BTN_TR,		/* WIIEXT_KEY_RT */ | 
|  | 78 | }; | 
|  | 79 |  | 
|  | 80 | /* diable all extensions */ | 
|  | 81 | static void ext_disable(struct wiimote_ext *ext) | 
|  | 82 | { | 
|  | 83 | unsigned long flags; | 
|  | 84 | __u8 wmem = 0x55; | 
|  | 85 |  | 
|  | 86 | if (!wiimote_cmd_acquire(ext->wdata)) { | 
|  | 87 | wiimote_cmd_write(ext->wdata, 0xa400f0, &wmem, sizeof(wmem)); | 
|  | 88 | wiimote_cmd_release(ext->wdata); | 
|  | 89 | } | 
|  | 90 |  | 
|  | 91 | spin_lock_irqsave(&ext->wdata->state.lock, flags); | 
|  | 92 | ext->motionp = false; | 
|  | 93 | ext->ext_type = WIIEXT_NONE; | 
|  | 94 | wiiproto_req_drm(ext->wdata, WIIPROTO_REQ_NULL); | 
|  | 95 | spin_unlock_irqrestore(&ext->wdata->state.lock, flags); | 
|  | 96 | } | 
|  | 97 |  | 
|  | 98 | static bool motionp_read(struct wiimote_ext *ext) | 
|  | 99 | { | 
|  | 100 | __u8 rmem[2], wmem; | 
|  | 101 | ssize_t ret; | 
|  | 102 | bool avail = false; | 
|  | 103 |  | 
|  | 104 | if (!atomic_read(&ext->mp_opened)) | 
|  | 105 | return false; | 
|  | 106 |  | 
|  | 107 | if (wiimote_cmd_acquire(ext->wdata)) | 
|  | 108 | return false; | 
|  | 109 |  | 
|  | 110 | /* initialize motion plus */ | 
|  | 111 | wmem = 0x55; | 
|  | 112 | ret = wiimote_cmd_write(ext->wdata, 0xa600f0, &wmem, sizeof(wmem)); | 
|  | 113 | if (ret) | 
|  | 114 | goto error; | 
|  | 115 |  | 
|  | 116 | /* read motion plus ID */ | 
|  | 117 | ret = wiimote_cmd_read(ext->wdata, 0xa600fe, rmem, 2); | 
|  | 118 | if (ret == 2 || rmem[1] == 0x5) | 
|  | 119 | avail = true; | 
|  | 120 |  | 
|  | 121 | error: | 
|  | 122 | wiimote_cmd_release(ext->wdata); | 
|  | 123 | return avail; | 
|  | 124 | } | 
|  | 125 |  | 
|  | 126 | static __u8 ext_read(struct wiimote_ext *ext) | 
|  | 127 | { | 
|  | 128 | ssize_t ret; | 
|  | 129 | __u8 rmem[2], wmem; | 
|  | 130 | __u8 type = WIIEXT_NONE; | 
|  | 131 |  | 
|  | 132 | if (!ext->plugged || !atomic_read(&ext->opened)) | 
|  | 133 | return WIIEXT_NONE; | 
|  | 134 |  | 
|  | 135 | if (wiimote_cmd_acquire(ext->wdata)) | 
|  | 136 | return WIIEXT_NONE; | 
|  | 137 |  | 
|  | 138 | /* initialize extension */ | 
|  | 139 | wmem = 0x55; | 
|  | 140 | ret = wiimote_cmd_write(ext->wdata, 0xa400f0, &wmem, sizeof(wmem)); | 
|  | 141 | if (!ret) { | 
|  | 142 | /* disable encryption */ | 
|  | 143 | wmem = 0x0; | 
|  | 144 | wiimote_cmd_write(ext->wdata, 0xa400fb, &wmem, sizeof(wmem)); | 
|  | 145 | } | 
|  | 146 |  | 
|  | 147 | /* read extension ID */ | 
|  | 148 | ret = wiimote_cmd_read(ext->wdata, 0xa400fe, rmem, 2); | 
|  | 149 | if (ret == 2) { | 
|  | 150 | if (rmem[0] == 0 && rmem[1] == 0) | 
|  | 151 | type = WIIEXT_NUNCHUCK; | 
|  | 152 | else if (rmem[0] == 0x01 && rmem[1] == 0x01) | 
|  | 153 | type = WIIEXT_CLASSIC; | 
|  | 154 | } | 
|  | 155 |  | 
|  | 156 | wiimote_cmd_release(ext->wdata); | 
|  | 157 |  | 
|  | 158 | return type; | 
|  | 159 | } | 
|  | 160 |  | 
|  | 161 | static void ext_enable(struct wiimote_ext *ext, bool motionp, __u8 ext_type) | 
|  | 162 | { | 
|  | 163 | unsigned long flags; | 
|  | 164 | __u8 wmem; | 
|  | 165 | int ret; | 
|  | 166 |  | 
|  | 167 | if (motionp) { | 
|  | 168 | if (wiimote_cmd_acquire(ext->wdata)) | 
|  | 169 | return; | 
|  | 170 |  | 
|  | 171 | if (ext_type == WIIEXT_CLASSIC) | 
|  | 172 | wmem = 0x07; | 
|  | 173 | else if (ext_type == WIIEXT_NUNCHUCK) | 
|  | 174 | wmem = 0x05; | 
|  | 175 | else | 
|  | 176 | wmem = 0x04; | 
|  | 177 |  | 
|  | 178 | ret = wiimote_cmd_write(ext->wdata, 0xa600fe, &wmem, sizeof(wmem)); | 
|  | 179 | wiimote_cmd_release(ext->wdata); | 
|  | 180 | if (ret) | 
|  | 181 | return; | 
|  | 182 | } | 
|  | 183 |  | 
|  | 184 | spin_lock_irqsave(&ext->wdata->state.lock, flags); | 
|  | 185 | ext->motionp = motionp; | 
|  | 186 | ext->ext_type = ext_type; | 
|  | 187 | wiiproto_req_drm(ext->wdata, WIIPROTO_REQ_NULL); | 
|  | 188 | spin_unlock_irqrestore(&ext->wdata->state.lock, flags); | 
|  | 189 | } | 
|  | 190 |  | 
|  | 191 | static void wiiext_worker(struct work_struct *work) | 
|  | 192 | { | 
|  | 193 | struct wiimote_ext *ext = container_of(work, struct wiimote_ext, | 
|  | 194 | worker); | 
|  | 195 | bool motionp; | 
|  | 196 | __u8 ext_type; | 
|  | 197 |  | 
|  | 198 | ext_disable(ext); | 
|  | 199 | motionp = motionp_read(ext); | 
|  | 200 | ext_type = ext_read(ext); | 
|  | 201 | ext_enable(ext, motionp, ext_type); | 
|  | 202 | } | 
|  | 203 |  | 
|  | 204 | /* schedule work only once, otherwise mark for reschedule */ | 
|  | 205 | static void wiiext_schedule(struct wiimote_ext *ext) | 
|  | 206 | { | 
|  | 207 | queue_work(system_nrt_wq, &ext->worker); | 
|  | 208 | } | 
|  | 209 |  | 
|  | 210 | /* | 
|  | 211 | * Reacts on extension port events | 
|  | 212 | * Whenever the driver gets an event from the wiimote that an extension has been | 
|  | 213 | * plugged or unplugged, this funtion shall be called. It checks what extensions | 
|  | 214 | * are connected and initializes and activates them. | 
|  | 215 | * This can be called in atomic context. The initialization is done in a | 
|  | 216 | * separate worker thread. The state.lock spinlock must be held by the caller. | 
|  | 217 | */ | 
|  | 218 | void wiiext_event(struct wiimote_data *wdata, bool plugged) | 
|  | 219 | { | 
|  | 220 | if (!wdata->ext) | 
|  | 221 | return; | 
|  | 222 |  | 
|  | 223 | if (wdata->ext->plugged == plugged) | 
|  | 224 | return; | 
|  | 225 |  | 
|  | 226 | wdata->ext->plugged = plugged; | 
|  | 227 |  | 
|  | 228 | if (!plugged) | 
|  | 229 | wdata->ext->mp_plugged = false; | 
|  | 230 |  | 
|  | 231 | /* | 
|  | 232 | * We need to call wiiext_schedule(wdata->ext) here, however, the | 
|  | 233 | * extension initialization logic is not fully understood and so | 
|  | 234 | * automatic initialization is not supported, yet. | 
|  | 235 | */ | 
|  | 236 | } | 
|  | 237 |  | 
|  | 238 | /* | 
|  | 239 | * Returns true if the current DRM mode should contain extension data and false | 
|  | 240 | * if there is no interest in extension data. | 
|  | 241 | * All supported extensions send 6 byte extension data so any DRM that contains | 
|  | 242 | * extension bytes is fine. | 
|  | 243 | * The caller must hold the state.lock spinlock. | 
|  | 244 | */ | 
|  | 245 | bool wiiext_active(struct wiimote_data *wdata) | 
|  | 246 | { | 
|  | 247 | if (!wdata->ext) | 
|  | 248 | return false; | 
|  | 249 |  | 
|  | 250 | return wdata->ext->motionp || wdata->ext->ext_type; | 
|  | 251 | } | 
|  | 252 |  | 
|  | 253 | static void handler_motionp(struct wiimote_ext *ext, const __u8 *payload) | 
|  | 254 | { | 
|  | 255 | __s32 x, y, z; | 
|  | 256 | bool plugged; | 
|  | 257 |  | 
|  | 258 | /*        |   8    7    6    5    4    3 |  2  |  1  | | 
|  | 259 | *   -----+------------------------------+-----+-----+ | 
|  | 260 | *    1   |               Yaw Speed <7:0>            | | 
|  | 261 | *    2   |              Roll Speed <7:0>            | | 
|  | 262 | *    3   |             Pitch Speed <7:0>            | | 
|  | 263 | *   -----+------------------------------+-----+-----+ | 
|  | 264 | *    4   |       Yaw Speed <13:8>       | Yaw |Pitch| | 
|  | 265 | *   -----+------------------------------+-----+-----+ | 
|  | 266 | *    5   |      Roll Speed <13:8>       |Roll | Ext | | 
|  | 267 | *   -----+------------------------------+-----+-----+ | 
|  | 268 | *    6   |     Pitch Speed <13:8>       |  1  |  0  | | 
|  | 269 | *   -----+------------------------------+-----+-----+ | 
|  | 270 | * The single bits Yaw, Roll, Pitch in the lower right corner specify | 
|  | 271 | * whether the wiimote is rotating fast (0) or slow (1). Speed for slow | 
|  | 272 | * roation is 440 deg/s and for fast rotation 2000 deg/s. To get a | 
|  | 273 | * linear scale we multiply by 2000/440 = ~4.5454 which is 18 for fast | 
|  | 274 | * and 9 for slow. | 
|  | 275 | * If the wiimote is not rotating the sensor reports 2^13 = 8192. | 
|  | 276 | * Ext specifies whether an extension is connected to the motionp. | 
|  | 277 | */ | 
|  | 278 |  | 
|  | 279 | x = payload[0]; | 
|  | 280 | y = payload[1]; | 
|  | 281 | z = payload[2]; | 
|  | 282 |  | 
|  | 283 | x |= (((__u16)payload[3]) << 6) & 0xff00; | 
|  | 284 | y |= (((__u16)payload[4]) << 6) & 0xff00; | 
|  | 285 | z |= (((__u16)payload[5]) << 6) & 0xff00; | 
|  | 286 |  | 
|  | 287 | x -= 8192; | 
|  | 288 | y -= 8192; | 
|  | 289 | z -= 8192; | 
|  | 290 |  | 
|  | 291 | if (!(payload[3] & 0x02)) | 
|  | 292 | x *= 18; | 
|  | 293 | else | 
|  | 294 | x *= 9; | 
|  | 295 | if (!(payload[4] & 0x02)) | 
|  | 296 | y *= 18; | 
|  | 297 | else | 
|  | 298 | y *= 9; | 
|  | 299 | if (!(payload[3] & 0x01)) | 
|  | 300 | z *= 18; | 
|  | 301 | else | 
|  | 302 | z *= 9; | 
|  | 303 |  | 
|  | 304 | input_report_abs(ext->mp_input, ABS_RX, x); | 
|  | 305 | input_report_abs(ext->mp_input, ABS_RY, y); | 
|  | 306 | input_report_abs(ext->mp_input, ABS_RZ, z); | 
|  | 307 | input_sync(ext->mp_input); | 
|  | 308 |  | 
|  | 309 | plugged = payload[5] & 0x01; | 
|  | 310 | if (plugged != ext->mp_plugged) | 
|  | 311 | ext->mp_plugged = plugged; | 
|  | 312 | } | 
|  | 313 |  | 
|  | 314 | static void handler_nunchuck(struct wiimote_ext *ext, const __u8 *payload) | 
|  | 315 | { | 
|  | 316 | __s16 x, y, z, bx, by; | 
|  | 317 |  | 
|  | 318 | /*   Byte |   8    7 |  6    5 |  4    3 |  2 |  1  | | 
|  | 319 | *   -----+----------+---------+---------+----+-----+ | 
|  | 320 | *    1   |              Button X <7:0>             | | 
|  | 321 | *    2   |              Button Y <7:0>             | | 
|  | 322 | *   -----+----------+---------+---------+----+-----+ | 
|  | 323 | *    3   |               Speed X <9:2>             | | 
|  | 324 | *    4   |               Speed Y <9:2>             | | 
|  | 325 | *    5   |               Speed Z <9:2>             | | 
|  | 326 | *   -----+----------+---------+---------+----+-----+ | 
|  | 327 | *    6   | Z <1:0>  | Y <1:0> | X <1:0> | BC | BZ  | | 
|  | 328 | *   -----+----------+---------+---------+----+-----+ | 
|  | 329 | * Button X/Y is the analog stick. Speed X, Y and Z are the | 
|  | 330 | * accelerometer data in the same format as the wiimote's accelerometer. | 
|  | 331 | * The 6th byte contains the LSBs of the accelerometer data. | 
|  | 332 | * BC and BZ are the C and Z buttons: 0 means pressed | 
|  | 333 | * | 
|  | 334 | * If reported interleaved with motionp, then the layout changes. The | 
|  | 335 | * 5th and 6th byte changes to: | 
|  | 336 | *   -----+-----------------------------------+-----+ | 
|  | 337 | *    5   |            Speed Z <9:3>          | EXT | | 
|  | 338 | *   -----+--------+-----+-----+----+----+----+-----+ | 
|  | 339 | *    6   |Z <2:1> |Y <1>|X <1>| BC | BZ | 0  |  0  | | 
|  | 340 | *   -----+--------+-----+-----+----+----+----+-----+ | 
|  | 341 | * All three accelerometer values lose their LSB. The other data is | 
|  | 342 | * still available but slightly moved. | 
|  | 343 | * | 
|  | 344 | * Center data for button values is 128. Center value for accelerometer | 
|  | 345 | * values it 512 / 0x200 | 
|  | 346 | */ | 
|  | 347 |  | 
|  | 348 | bx = payload[0]; | 
|  | 349 | by = payload[1]; | 
|  | 350 | bx -= 128; | 
|  | 351 | by -= 128; | 
|  | 352 |  | 
|  | 353 | x = payload[2] << 2; | 
|  | 354 | y = payload[3] << 2; | 
|  | 355 | z = payload[4] << 2; | 
|  | 356 |  | 
|  | 357 | if (ext->motionp) { | 
|  | 358 | x |= (payload[5] >> 3) & 0x02; | 
|  | 359 | y |= (payload[5] >> 4) & 0x02; | 
|  | 360 | z &= ~0x4; | 
|  | 361 | z |= (payload[5] >> 5) & 0x06; | 
|  | 362 | } else { | 
|  | 363 | x |= (payload[5] >> 2) & 0x03; | 
|  | 364 | y |= (payload[5] >> 4) & 0x03; | 
|  | 365 | z |= (payload[5] >> 6) & 0x03; | 
|  | 366 | } | 
|  | 367 |  | 
|  | 368 | x -= 0x200; | 
|  | 369 | y -= 0x200; | 
|  | 370 | z -= 0x200; | 
|  | 371 |  | 
|  | 372 | input_report_abs(ext->input, ABS_HAT0X, bx); | 
|  | 373 | input_report_abs(ext->input, ABS_HAT0Y, by); | 
|  | 374 |  | 
|  | 375 | input_report_abs(ext->input, ABS_RX, x); | 
|  | 376 | input_report_abs(ext->input, ABS_RY, y); | 
|  | 377 | input_report_abs(ext->input, ABS_RZ, z); | 
|  | 378 |  | 
|  | 379 | if (ext->motionp) { | 
|  | 380 | input_report_key(ext->input, | 
|  | 381 | wiiext_keymap[WIIEXT_KEY_Z], !(payload[5] & 0x04)); | 
|  | 382 | input_report_key(ext->input, | 
|  | 383 | wiiext_keymap[WIIEXT_KEY_C], !(payload[5] & 0x08)); | 
|  | 384 | } else { | 
|  | 385 | input_report_key(ext->input, | 
|  | 386 | wiiext_keymap[WIIEXT_KEY_Z], !(payload[5] & 0x01)); | 
|  | 387 | input_report_key(ext->input, | 
|  | 388 | wiiext_keymap[WIIEXT_KEY_C], !(payload[5] & 0x02)); | 
|  | 389 | } | 
|  | 390 |  | 
|  | 391 | input_sync(ext->input); | 
|  | 392 | } | 
|  | 393 |  | 
|  | 394 | static void handler_classic(struct wiimote_ext *ext, const __u8 *payload) | 
|  | 395 | { | 
|  | 396 | __s8 rx, ry, lx, ly, lt, rt; | 
|  | 397 |  | 
|  | 398 | /*   Byte |  8  |  7  |  6  |  5  |  4  |  3  |  2  |  1  | | 
|  | 399 | *   -----+-----+-----+-----+-----+-----+-----+-----+-----+ | 
|  | 400 | *    1   | RX <5:4>  |              LX <5:0>             | | 
|  | 401 | *    2   | RX <3:2>  |              LY <5:0>             | | 
|  | 402 | *   -----+-----+-----+-----+-----------------------------+ | 
|  | 403 | *    3   |RX<1>| LT <5:4>  |         RY <5:1>            | | 
|  | 404 | *   -----+-----+-----------+-----------------------------+ | 
|  | 405 | *    4   |     LT <3:1>    |         RT <5:1>            | | 
|  | 406 | *   -----+-----+-----+-----+-----+-----+-----+-----+-----+ | 
|  | 407 | *    5   | BDR | BDD | BLT | B-  | BH  | B+  | BRT |  1  | | 
|  | 408 | *   -----+-----+-----+-----+-----+-----+-----+-----+-----+ | 
|  | 409 | *    6   | BZL | BB  | BY  | BA  | BX  | BZR | BDL | BDU | | 
|  | 410 | *   -----+-----+-----+-----+-----+-----+-----+-----+-----+ | 
|  | 411 | * All buttons are 0 if pressed | 
|  | 412 | * RX and RY are right analog stick | 
|  | 413 | * LX and LY are left analog stick | 
|  | 414 | * LT is left trigger, RT is right trigger | 
|  | 415 | * BLT is 0 if left trigger is fully pressed | 
|  | 416 | * BRT is 0 if right trigger is fully pressed | 
|  | 417 | * BDR, BDD, BDL, BDU form the D-Pad with right, down, left, up buttons | 
|  | 418 | * BZL is left Z button and BZR is right Z button | 
|  | 419 | * B-, BH, B+ are +, HOME and - buttons | 
|  | 420 | * BB, BY, BA, BX are A, B, X, Y buttons | 
|  | 421 | * LSB of RX, RY, LT, and RT are not transmitted and always 0. | 
|  | 422 | * | 
|  | 423 | * With motionp enabled it changes slightly to this: | 
|  | 424 | *   Byte |  8  |  7  |  6  |  5  |  4  |  3  |  2  |  1  | | 
|  | 425 | *   -----+-----+-----+-----+-----+-----+-----+-----+-----+ | 
|  | 426 | *    1   | RX <4:3>  |          LX <5:1>           | BDU | | 
|  | 427 | *    2   | RX <2:1>  |          LY <5:1>           | BDL | | 
|  | 428 | *   -----+-----+-----+-----+-----------------------+-----+ | 
|  | 429 | *    3   |RX<0>| LT <4:3>  |         RY <4:0>            | | 
|  | 430 | *   -----+-----+-----------+-----------------------------+ | 
|  | 431 | *    4   |     LT <2:0>    |         RT <4:0>            | | 
|  | 432 | *   -----+-----+-----+-----+-----+-----+-----+-----+-----+ | 
|  | 433 | *    5   | BDR | BDD | BLT | B-  | BH  | B+  | BRT | EXT | | 
|  | 434 | *   -----+-----+-----+-----+-----+-----+-----+-----+-----+ | 
|  | 435 | *    6   | BZL | BB  | BY  | BA  | BX  | BZR |  0  |  0  | | 
|  | 436 | *   -----+-----+-----+-----+-----+-----+-----+-----+-----+ | 
|  | 437 | * Only the LSBs of LX and LY are lost. BDU and BDL are moved, the rest | 
|  | 438 | * is the same as before. | 
|  | 439 | */ | 
|  | 440 |  | 
|  | 441 | if (ext->motionp) { | 
|  | 442 | lx = payload[0] & 0x3e; | 
|  | 443 | ly = payload[0] & 0x3e; | 
|  | 444 | } else { | 
|  | 445 | lx = payload[0] & 0x3f; | 
|  | 446 | ly = payload[0] & 0x3f; | 
|  | 447 | } | 
|  | 448 |  | 
|  | 449 | rx = (payload[0] >> 3) & 0x14; | 
|  | 450 | rx |= (payload[1] >> 5) & 0x06; | 
|  | 451 | rx |= (payload[2] >> 7) & 0x01; | 
|  | 452 | ry = payload[2] & 0x1f; | 
|  | 453 |  | 
|  | 454 | rt = payload[3] & 0x1f; | 
|  | 455 | lt = (payload[2] >> 2) & 0x18; | 
|  | 456 | lt |= (payload[3] >> 5) & 0x07; | 
|  | 457 |  | 
|  | 458 | rx <<= 1; | 
|  | 459 | ry <<= 1; | 
|  | 460 | rt <<= 1; | 
|  | 461 | lt <<= 1; | 
|  | 462 |  | 
|  | 463 | input_report_abs(ext->input, ABS_HAT1X, lx - 0x20); | 
|  | 464 | input_report_abs(ext->input, ABS_HAT1Y, ly - 0x20); | 
|  | 465 | input_report_abs(ext->input, ABS_HAT2X, rx - 0x20); | 
|  | 466 | input_report_abs(ext->input, ABS_HAT2Y, ry - 0x20); | 
|  | 467 | input_report_abs(ext->input, ABS_HAT3X, rt - 0x20); | 
|  | 468 | input_report_abs(ext->input, ABS_HAT3Y, lt - 0x20); | 
|  | 469 |  | 
|  | 470 | input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_RIGHT], | 
|  | 471 | !!(payload[4] & 0x80)); | 
|  | 472 | input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_DOWN], | 
|  | 473 | !!(payload[4] & 0x40)); | 
|  | 474 | input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_LT], | 
|  | 475 | !!(payload[4] & 0x20)); | 
|  | 476 | input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_MINUS], | 
|  | 477 | !!(payload[4] & 0x10)); | 
|  | 478 | input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_HOME], | 
|  | 479 | !!(payload[4] & 0x08)); | 
|  | 480 | input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_PLUS], | 
|  | 481 | !!(payload[4] & 0x04)); | 
|  | 482 | input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_RT], | 
|  | 483 | !!(payload[4] & 0x02)); | 
|  | 484 | input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_ZL], | 
|  | 485 | !!(payload[5] & 0x80)); | 
|  | 486 | input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_B], | 
|  | 487 | !!(payload[5] & 0x40)); | 
|  | 488 | input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_Y], | 
|  | 489 | !!(payload[5] & 0x20)); | 
|  | 490 | input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_A], | 
|  | 491 | !!(payload[5] & 0x10)); | 
|  | 492 | input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_X], | 
|  | 493 | !!(payload[5] & 0x08)); | 
|  | 494 | input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_ZR], | 
|  | 495 | !!(payload[5] & 0x04)); | 
|  | 496 |  | 
|  | 497 | if (ext->motionp) { | 
|  | 498 | input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_UP], | 
|  | 499 | !!(payload[0] & 0x01)); | 
|  | 500 | input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_LEFT], | 
|  | 501 | !!(payload[1] & 0x01)); | 
|  | 502 | } else { | 
|  | 503 | input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_UP], | 
|  | 504 | !!(payload[5] & 0x01)); | 
|  | 505 | input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_LEFT], | 
|  | 506 | !!(payload[5] & 0x02)); | 
|  | 507 | } | 
|  | 508 |  | 
|  | 509 | input_sync(ext->input); | 
|  | 510 | } | 
|  | 511 |  | 
|  | 512 | /* call this with state.lock spinlock held */ | 
|  | 513 | void wiiext_handle(struct wiimote_data *wdata, const __u8 *payload) | 
|  | 514 | { | 
|  | 515 | struct wiimote_ext *ext = wdata->ext; | 
|  | 516 |  | 
|  | 517 | if (!ext) | 
|  | 518 | return; | 
|  | 519 |  | 
|  | 520 | if (ext->motionp && (payload[5] & 0x02)) { | 
|  | 521 | handler_motionp(ext, payload); | 
|  | 522 | } else if (ext->ext_type == WIIEXT_NUNCHUCK) { | 
|  | 523 | handler_nunchuck(ext, payload); | 
|  | 524 | } else if (ext->ext_type == WIIEXT_CLASSIC) { | 
|  | 525 | handler_classic(ext, payload); | 
|  | 526 | } | 
|  | 527 | } | 
|  | 528 |  | 
|  | 529 | static ssize_t wiiext_show(struct device *dev, struct device_attribute *attr, | 
|  | 530 | char *buf) | 
|  | 531 | { | 
|  | 532 | struct wiimote_data *wdata = dev_to_wii(dev); | 
|  | 533 | __u8 type = WIIEXT_NONE; | 
|  | 534 | bool motionp = false; | 
|  | 535 | unsigned long flags; | 
|  | 536 |  | 
|  | 537 | spin_lock_irqsave(&wdata->state.lock, flags); | 
|  | 538 | if (wdata->ext) { | 
|  | 539 | motionp = wdata->ext->motionp; | 
|  | 540 | type = wdata->ext->ext_type; | 
|  | 541 | } | 
|  | 542 | spin_unlock_irqrestore(&wdata->state.lock, flags); | 
|  | 543 |  | 
|  | 544 | if (type == WIIEXT_NUNCHUCK) { | 
|  | 545 | if (motionp) | 
|  | 546 | return sprintf(buf, "motionp+nunchuck\n"); | 
|  | 547 | else | 
|  | 548 | return sprintf(buf, "nunchuck\n"); | 
|  | 549 | } else if (type == WIIEXT_CLASSIC) { | 
|  | 550 | if (motionp) | 
|  | 551 | return sprintf(buf, "motionp+classic\n"); | 
|  | 552 | else | 
|  | 553 | return sprintf(buf, "classic\n"); | 
|  | 554 | } else { | 
|  | 555 | if (motionp) | 
|  | 556 | return sprintf(buf, "motionp\n"); | 
|  | 557 | else | 
|  | 558 | return sprintf(buf, "none\n"); | 
|  | 559 | } | 
|  | 560 | } | 
|  | 561 |  | 
|  | 562 | static DEVICE_ATTR(extension, S_IRUGO, wiiext_show, NULL); | 
|  | 563 |  | 
|  | 564 | static int wiiext_input_open(struct input_dev *dev) | 
|  | 565 | { | 
|  | 566 | struct wiimote_ext *ext = input_get_drvdata(dev); | 
|  | 567 | int ret; | 
|  | 568 |  | 
|  | 569 | ret = hid_hw_open(ext->wdata->hdev); | 
|  | 570 | if (ret) | 
|  | 571 | return ret; | 
|  | 572 |  | 
|  | 573 | atomic_inc(&ext->opened); | 
|  | 574 | wiiext_schedule(ext); | 
|  | 575 |  | 
|  | 576 | return 0; | 
|  | 577 | } | 
|  | 578 |  | 
|  | 579 | static void wiiext_input_close(struct input_dev *dev) | 
|  | 580 | { | 
|  | 581 | struct wiimote_ext *ext = input_get_drvdata(dev); | 
|  | 582 |  | 
|  | 583 | atomic_dec(&ext->opened); | 
|  | 584 | wiiext_schedule(ext); | 
|  | 585 | hid_hw_close(ext->wdata->hdev); | 
|  | 586 | } | 
|  | 587 |  | 
|  | 588 | static int wiiext_mp_open(struct input_dev *dev) | 
|  | 589 | { | 
|  | 590 | struct wiimote_ext *ext = input_get_drvdata(dev); | 
|  | 591 | int ret; | 
|  | 592 |  | 
|  | 593 | ret = hid_hw_open(ext->wdata->hdev); | 
|  | 594 | if (ret) | 
|  | 595 | return ret; | 
|  | 596 |  | 
|  | 597 | atomic_inc(&ext->mp_opened); | 
|  | 598 | wiiext_schedule(ext); | 
|  | 599 |  | 
|  | 600 | return 0; | 
|  | 601 | } | 
|  | 602 |  | 
|  | 603 | static void wiiext_mp_close(struct input_dev *dev) | 
|  | 604 | { | 
|  | 605 | struct wiimote_ext *ext = input_get_drvdata(dev); | 
|  | 606 |  | 
|  | 607 | atomic_dec(&ext->mp_opened); | 
|  | 608 | wiiext_schedule(ext); | 
|  | 609 | hid_hw_close(ext->wdata->hdev); | 
|  | 610 | } | 
|  | 611 |  | 
|  | 612 | /* Initializes the extension driver of a wiimote */ | 
|  | 613 | int wiiext_init(struct wiimote_data *wdata) | 
|  | 614 | { | 
|  | 615 | struct wiimote_ext *ext; | 
|  | 616 | unsigned long flags; | 
|  | 617 | int ret, i; | 
|  | 618 |  | 
|  | 619 | ext = kzalloc(sizeof(*ext), GFP_KERNEL); | 
|  | 620 | if (!ext) | 
|  | 621 | return -ENOMEM; | 
|  | 622 |  | 
|  | 623 | ext->wdata = wdata; | 
|  | 624 | INIT_WORK(&ext->worker, wiiext_worker); | 
|  | 625 |  | 
|  | 626 | ext->input = input_allocate_device(); | 
|  | 627 | if (!ext->input) { | 
|  | 628 | ret = -ENOMEM; | 
|  | 629 | goto err_input; | 
|  | 630 | } | 
|  | 631 |  | 
|  | 632 | input_set_drvdata(ext->input, ext); | 
|  | 633 | ext->input->open = wiiext_input_open; | 
|  | 634 | ext->input->close = wiiext_input_close; | 
|  | 635 | ext->input->dev.parent = &wdata->hdev->dev; | 
|  | 636 | ext->input->id.bustype = wdata->hdev->bus; | 
|  | 637 | ext->input->id.vendor = wdata->hdev->vendor; | 
|  | 638 | ext->input->id.product = wdata->hdev->product; | 
|  | 639 | ext->input->id.version = wdata->hdev->version; | 
|  | 640 | ext->input->name = WIIMOTE_NAME " Extension"; | 
|  | 641 |  | 
|  | 642 | set_bit(EV_KEY, ext->input->evbit); | 
|  | 643 | for (i = 0; i < WIIEXT_KEY_COUNT; ++i) | 
|  | 644 | set_bit(wiiext_keymap[i], ext->input->keybit); | 
|  | 645 |  | 
|  | 646 | set_bit(EV_ABS, ext->input->evbit); | 
|  | 647 | set_bit(ABS_HAT0X, ext->input->absbit); | 
|  | 648 | set_bit(ABS_HAT0Y, ext->input->absbit); | 
|  | 649 | set_bit(ABS_HAT1X, ext->input->absbit); | 
|  | 650 | set_bit(ABS_HAT1Y, ext->input->absbit); | 
|  | 651 | set_bit(ABS_HAT2X, ext->input->absbit); | 
|  | 652 | set_bit(ABS_HAT2Y, ext->input->absbit); | 
|  | 653 | set_bit(ABS_HAT3X, ext->input->absbit); | 
|  | 654 | set_bit(ABS_HAT3Y, ext->input->absbit); | 
|  | 655 | input_set_abs_params(ext->input, ABS_HAT0X, -120, 120, 2, 4); | 
|  | 656 | input_set_abs_params(ext->input, ABS_HAT0Y, -120, 120, 2, 4); | 
|  | 657 | input_set_abs_params(ext->input, ABS_HAT1X, -30, 30, 1, 1); | 
|  | 658 | input_set_abs_params(ext->input, ABS_HAT1Y, -30, 30, 1, 1); | 
|  | 659 | input_set_abs_params(ext->input, ABS_HAT2X, -30, 30, 1, 1); | 
|  | 660 | input_set_abs_params(ext->input, ABS_HAT2Y, -30, 30, 1, 1); | 
|  | 661 | input_set_abs_params(ext->input, ABS_HAT3X, -30, 30, 1, 1); | 
|  | 662 | input_set_abs_params(ext->input, ABS_HAT3Y, -30, 30, 1, 1); | 
|  | 663 | set_bit(ABS_RX, ext->input->absbit); | 
|  | 664 | set_bit(ABS_RY, ext->input->absbit); | 
|  | 665 | set_bit(ABS_RZ, ext->input->absbit); | 
|  | 666 | input_set_abs_params(ext->input, ABS_RX, -500, 500, 2, 4); | 
|  | 667 | input_set_abs_params(ext->input, ABS_RY, -500, 500, 2, 4); | 
|  | 668 | input_set_abs_params(ext->input, ABS_RZ, -500, 500, 2, 4); | 
|  | 669 |  | 
|  | 670 | ret = input_register_device(ext->input); | 
|  | 671 | if (ret) { | 
|  | 672 | input_free_device(ext->input); | 
|  | 673 | goto err_input; | 
|  | 674 | } | 
|  | 675 |  | 
|  | 676 | ext->mp_input = input_allocate_device(); | 
|  | 677 | if (!ext->mp_input) { | 
|  | 678 | ret = -ENOMEM; | 
|  | 679 | goto err_mp; | 
|  | 680 | } | 
|  | 681 |  | 
|  | 682 | input_set_drvdata(ext->mp_input, ext); | 
|  | 683 | ext->mp_input->open = wiiext_mp_open; | 
|  | 684 | ext->mp_input->close = wiiext_mp_close; | 
|  | 685 | ext->mp_input->dev.parent = &wdata->hdev->dev; | 
|  | 686 | ext->mp_input->id.bustype = wdata->hdev->bus; | 
|  | 687 | ext->mp_input->id.vendor = wdata->hdev->vendor; | 
|  | 688 | ext->mp_input->id.product = wdata->hdev->product; | 
|  | 689 | ext->mp_input->id.version = wdata->hdev->version; | 
|  | 690 | ext->mp_input->name = WIIMOTE_NAME " Motion+"; | 
|  | 691 |  | 
|  | 692 | set_bit(EV_ABS, ext->mp_input->evbit); | 
|  | 693 | set_bit(ABS_RX, ext->mp_input->absbit); | 
|  | 694 | set_bit(ABS_RY, ext->mp_input->absbit); | 
|  | 695 | set_bit(ABS_RZ, ext->mp_input->absbit); | 
|  | 696 | input_set_abs_params(ext->mp_input, ABS_RX, -160000, 160000, 4, 8); | 
|  | 697 | input_set_abs_params(ext->mp_input, ABS_RY, -160000, 160000, 4, 8); | 
|  | 698 | input_set_abs_params(ext->mp_input, ABS_RZ, -160000, 160000, 4, 8); | 
|  | 699 |  | 
|  | 700 | ret = input_register_device(ext->mp_input); | 
|  | 701 | if (ret) { | 
|  | 702 | input_free_device(ext->mp_input); | 
|  | 703 | goto err_mp; | 
|  | 704 | } | 
|  | 705 |  | 
|  | 706 | ret = device_create_file(&wdata->hdev->dev, &dev_attr_extension); | 
|  | 707 | if (ret) | 
|  | 708 | goto err_dev; | 
|  | 709 |  | 
|  | 710 | spin_lock_irqsave(&wdata->state.lock, flags); | 
|  | 711 | wdata->ext = ext; | 
|  | 712 | spin_unlock_irqrestore(&wdata->state.lock, flags); | 
|  | 713 |  | 
|  | 714 | return 0; | 
|  | 715 |  | 
|  | 716 | err_dev: | 
|  | 717 | input_unregister_device(ext->mp_input); | 
|  | 718 | err_mp: | 
|  | 719 | input_unregister_device(ext->input); | 
|  | 720 | err_input: | 
|  | 721 | kfree(ext); | 
|  | 722 | return ret; | 
|  | 723 | } | 
|  | 724 |  | 
|  | 725 | /* Deinitializes the extension driver of a wiimote */ | 
|  | 726 | void wiiext_deinit(struct wiimote_data *wdata) | 
|  | 727 | { | 
|  | 728 | struct wiimote_ext *ext = wdata->ext; | 
|  | 729 | unsigned long flags; | 
|  | 730 |  | 
|  | 731 | if (!ext) | 
|  | 732 | return; | 
|  | 733 |  | 
|  | 734 | /* | 
|  | 735 | * We first unset wdata->ext to avoid further input from the wiimote | 
|  | 736 | * core. The worker thread does not access this pointer so it is not | 
|  | 737 | * affected by this. | 
|  | 738 | * We kill the worker after this so it does not get respawned during | 
|  | 739 | * deinitialization. | 
|  | 740 | */ | 
|  | 741 |  | 
|  | 742 | spin_lock_irqsave(&wdata->state.lock, flags); | 
|  | 743 | wdata->ext = NULL; | 
|  | 744 | spin_unlock_irqrestore(&wdata->state.lock, flags); | 
|  | 745 |  | 
|  | 746 | device_remove_file(&wdata->hdev->dev, &dev_attr_extension); | 
|  | 747 | input_unregister_device(ext->mp_input); | 
|  | 748 | input_unregister_device(ext->input); | 
|  | 749 |  | 
|  | 750 | cancel_work_sync(&ext->worker); | 
|  | 751 | kfree(ext); | 
|  | 752 | } |