blob: 96c7b9b5f2f0481929a597dbd9a45a0314f06d83 [file] [log] [blame]
lh9ed821d2023-04-07 01:36:19 -07001/*
2 * (C) Copyright 2008
3 * Benjamin Warren, biggerbadderben@gmail.com
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 */
23
24/*
25 * netdev.h - definitions an prototypes for network devices
26 */
27
28#ifndef _NETDEV_H_
29#define _NETDEV_H_
30
31/*
32 * Board and CPU-specific initialization functions
33 * board_eth_init() has highest priority. cpu_eth_init() only
34 * gets called if board_eth_init() isn't instantiated or fails.
35 * Return values:
36 * 0: success
37 * -1: failure
38 */
39
40int board_eth_init(bd_t *bis);
41int cpu_eth_init(bd_t *bis);
42
43/* Driver initialization prototypes */
44int altera_tse_initialize(u8 dev_num, int mac_base,
45 int sgdma_rx_base, int sgdma_tx_base);
46int at91emac_register(bd_t *bis, unsigned long iobase);
47int au1x00_enet_initialize(bd_t*);
48int ax88180_initialize(bd_t *bis);
49int bfin_EMAC_initialize(bd_t *bis);
50int cs8900_initialize(u8 dev_num, int base_addr);
51int davinci_emac_initialize(void);
52int dc21x4x_initialize(bd_t *bis);
53int designware_initialize(u32 id, ulong base_addr, u32 phy_addr);
54int dm9000_initialize(bd_t *bis);
55int dnet_eth_initialize(int id, void *regs, unsigned int phy_addr);
56int e1000_initialize(bd_t *bis);
57int eepro100_initialize(bd_t *bis);
58int enc28j60_initialize(unsigned int bus, unsigned int cs,
59 unsigned int max_hz, unsigned int mode);
60int ep93xx_eth_initialize(u8 dev_num, int base_addr);
61int eth_3com_initialize (bd_t * bis);
62int ethoc_initialize(u8 dev_num, int base_addr);
63int fec_initialize (bd_t *bis);
64int fecmxc_initialize (bd_t *bis);
65int fecmxc_initialize(bd_t *bis);
66int ftgmac100_initialize(bd_t *bits);
67int ftmac100_initialize(bd_t *bits);
68int greth_initialize(bd_t *bis);
69void gt6426x_eth_initialize(bd_t *bis);
70int inca_switch_initialize(bd_t *bis);
71int ks8695_eth_initialize(void);
72int lan91c96_initialize(u8 dev_num, int base_addr);
73int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
74int mcdmafec_initialize(bd_t *bis);
75int mcffec_initialize(bd_t *bis);
76int mpc512x_fec_initialize(bd_t *bis);
77int mpc5xxx_fec_initialize(bd_t *bis);
78int mpc8220_fec_initialize(bd_t *bis);
79int mpc82xx_scc_enet_initialize(bd_t *bis);
80int mvgbe_initialize(bd_t *bis);
81int natsemi_initialize(bd_t *bis);
82int npe_initialize(bd_t *bis);
83int ns8382x_initialize(bd_t *bis);
84int pcnet_initialize(bd_t *bis);
85int plb2800_eth_initialize(bd_t *bis);
86int ppc_4xx_eth_initialize (bd_t *bis);
87int rtl8139_initialize(bd_t *bis);
88int rtl8169_initialize(bd_t *bis);
89int scc_initialize(bd_t *bis);
90int sh_eth_initialize(bd_t *bis);
91int skge_initialize(bd_t *bis);
92int smc91111_initialize(u8 dev_num, int base_addr);
93int smc911x_initialize(u8 dev_num, int base_addr);
94int tsi108_eth_initialize(bd_t *bis);
95int uec_standard_init(bd_t *bis);
96int uli526x_initialize(bd_t *bis);
97int xilinx_emaclite_initialize (bd_t *bis, int base_addr);
98
99/* Boards with PCI network controllers can call this from their board_eth_init()
100 * function to initialize whatever's on board.
101 * Return value is total # of devices found */
102
103static inline int pci_eth_init(bd_t *bis)
104{
105 int num = 0;
106
107#ifdef CONFIG_PCI
108
109#ifdef CONFIG_EEPRO100
110 num += eepro100_initialize(bis);
111#endif
112#ifdef CONFIG_TULIP
113 num += dc21x4x_initialize(bis);
114#endif
115#ifdef CONFIG_E1000
116 num += e1000_initialize(bis);
117#endif
118#ifdef CONFIG_PCNET
119 num += pcnet_initialize(bis);
120#endif
121#ifdef CONFIG_NATSEMI
122 num += natsemi_initialize(bis);
123#endif
124#ifdef CONFIG_NS8382X
125 num += ns8382x_initialize(bis);
126#endif
127#if defined(CONFIG_RTL8139)
128 num += rtl8139_initialize(bis);
129#endif
130#if defined(CONFIG_RTL8169)
131 num += rtl8169_initialize(bis);
132#endif
133#if defined(CONFIG_ULI526X)
134 num += uli526x_initialize(bis);
135#endif
136
137#endif /* CONFIG_PCI */
138 return num;
139}
140
141/*
142 * Boards with mv88e61xx switch can use this by defining
143 * CONFIG_MV88E61XX_SWITCH in respective board configheader file
144 * the stuct and enums here are used to specify switch configuration params
145 */
146#if defined(CONFIG_MV88E61XX_SWITCH)
147enum mv88e61xx_cfg_vlan {
148 MV88E61XX_VLANCFG_DEFAULT,
149 MV88E61XX_VLANCFG_ROUTER
150};
151
152enum mv88e61xx_cfg_mdip {
153 MV88E61XX_MDIP_NOCHANGE,
154 MV88E61XX_MDIP_REVERSE
155};
156
157enum mv88e61xx_cfg_ledinit {
158 MV88E61XX_LED_INIT_DIS,
159 MV88E61XX_LED_INIT_EN
160};
161
162enum mv88e61xx_cfg_rgmiid {
163 MV88E61XX_RGMII_DELAY_DIS,
164 MV88E61XX_RGMII_DELAY_EN
165};
166
167enum mv88e61xx_cfg_prtstt {
168 MV88E61XX_PORTSTT_DISABLED,
169 MV88E61XX_PORTSTT_BLOCKING,
170 MV88E61XX_PORTSTT_LEARNING,
171 MV88E61XX_PORTSTT_FORWARDING
172};
173
174struct mv88e61xx_config {
175 char *name;
176 enum mv88e61xx_cfg_vlan vlancfg;
177 enum mv88e61xx_cfg_rgmiid rgmii_delay;
178 enum mv88e61xx_cfg_prtstt portstate;
179 enum mv88e61xx_cfg_ledinit led_init;
180 enum mv88e61xx_cfg_mdip mdip;
181 u32 ports_enabled;
182 u8 cpuport;
183};
184
185int mv88e61xx_switch_initialize(struct mv88e61xx_config *swconfig);
186#endif /* CONFIG_MV88E61XX_SWITCH */
187
188#endif /* _NETDEV_H_ */