| lh | 9ed821d | 2023-04-07 01:36:19 -0700 | [diff] [blame] | 1 | #ifndef __SOUND_EMU8000_H | 
 | 2 | #define __SOUND_EMU8000_H | 
 | 3 | /* | 
 | 4 |  *  Defines for the emu8000 (AWE32/64) | 
 | 5 |  * | 
 | 6 |  *  Copyright (C) 1999 Steve Ratcliffe | 
 | 7 |  *  Copyright (C) 1999-2000 Takashi Iwai <tiwai@suse.de> | 
 | 8 |  * | 
 | 9 |  *   This program is free software; you can redistribute it and/or modify | 
 | 10 |  *   it under the terms of the GNU General Public License as published by | 
 | 11 |  *   the Free Software Foundation; either version 2 of the License, or | 
 | 12 |  *   (at your option) any later version. | 
 | 13 |  * | 
 | 14 |  *   This program is distributed in the hope that it will be useful, | 
 | 15 |  *   but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 | 16 |  *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 | 17 |  *   GNU General Public License for more details. | 
 | 18 |  * | 
 | 19 |  *   You should have received a copy of the GNU General Public License | 
 | 20 |  *   along with this program; if not, write to the Free Software | 
 | 21 |  *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA | 
 | 22 |  */ | 
 | 23 |  | 
 | 24 | #include "emux_synth.h" | 
 | 25 | #include "seq_kernel.h" | 
 | 26 |  | 
 | 27 | /* | 
 | 28 |  * Hardware parameters. | 
 | 29 |  */ | 
 | 30 | #define EMU8000_MAX_DRAM (28 * 1024 * 1024) /* Max on-board mem is 28Mb ???*/ | 
 | 31 | #define EMU8000_DRAM_OFFSET 0x200000	/* Beginning of on board ram */ | 
 | 32 | #define EMU8000_CHANNELS   32	/* Number of hardware channels */ | 
 | 33 | #define EMU8000_DRAM_VOICES	30	/* number of normal voices */ | 
 | 34 |  | 
 | 35 | /* Flags to set a dma channel to read or write */ | 
 | 36 | #define EMU8000_RAM_READ   0 | 
 | 37 | #define EMU8000_RAM_WRITE  1 | 
 | 38 | #define EMU8000_RAM_CLOSE  2 | 
 | 39 | #define EMU8000_RAM_MODE_MASK	0x03 | 
 | 40 | #define EMU8000_RAM_RIGHT	0x10	/* use 'right' DMA channel */ | 
 | 41 |  | 
 | 42 | enum { | 
 | 43 | 	EMU8000_CONTROL_BASS = 0, | 
 | 44 | 	EMU8000_CONTROL_TREBLE, | 
 | 45 | 	EMU8000_CONTROL_CHORUS_MODE, | 
 | 46 | 	EMU8000_CONTROL_REVERB_MODE, | 
 | 47 | 	EMU8000_CONTROL_FM_CHORUS_DEPTH, | 
 | 48 | 	EMU8000_CONTROL_FM_REVERB_DEPTH, | 
 | 49 | 	EMU8000_NUM_CONTROLS, | 
 | 50 | }; | 
 | 51 |  | 
 | 52 | /* | 
 | 53 |  * Structure to hold all state information for the emu8000 driver. | 
 | 54 |  * | 
 | 55 |  * Note 1: The chip supports 32 channels in hardware this is max_channels | 
 | 56 |  * some of the channels may be used for other things so max_channels is | 
 | 57 |  * the number in use for wave voices. | 
 | 58 |  */ | 
 | 59 | struct snd_emu8000 { | 
 | 60 |  | 
 | 61 | 	struct snd_emux *emu; | 
 | 62 |  | 
 | 63 | 	int index;		/* sequencer client index */ | 
 | 64 | 	int seq_ports;		/* number of sequencer ports */ | 
 | 65 | 	int fm_chorus_depth;	/* FM OPL3 chorus depth */ | 
 | 66 | 	int fm_reverb_depth;	/* FM OPL3 reverb depth */ | 
 | 67 |  | 
 | 68 | 	int mem_size;		/* memory size */ | 
 | 69 | 	unsigned long port1;	/* Port usually base+0 */ | 
 | 70 | 	unsigned long port2;	/* Port usually at base+0x400 */ | 
 | 71 | 	unsigned long port3;	/* Port usually at base+0x800 */ | 
 | 72 | 	struct resource *res_port1; | 
 | 73 | 	struct resource *res_port2; | 
 | 74 | 	struct resource *res_port3; | 
 | 75 | 	unsigned short last_reg;/* Last register command */ | 
 | 76 | 	spinlock_t reg_lock; | 
 | 77 |  | 
 | 78 | 	int dram_checked; | 
 | 79 |  | 
 | 80 | 	struct snd_card *card;		/* The card that this belongs to */ | 
 | 81 |  | 
 | 82 | 	int chorus_mode; | 
 | 83 | 	int reverb_mode; | 
 | 84 | 	int bass_level; | 
 | 85 | 	int treble_level; | 
 | 86 |  | 
 | 87 | 	struct snd_util_memhdr *memhdr; | 
 | 88 |  | 
 | 89 | 	spinlock_t control_lock; | 
 | 90 | 	struct snd_kcontrol *controls[EMU8000_NUM_CONTROLS]; | 
 | 91 |  | 
 | 92 | 	struct snd_pcm *pcm; /* pcm on emu8000 wavetable */ | 
 | 93 |  | 
 | 94 | }; | 
 | 95 |  | 
 | 96 | /* sequencer device id */ | 
 | 97 | #define SNDRV_SEQ_DEV_ID_EMU8000	"emu8000-synth" | 
 | 98 |  | 
 | 99 |  | 
 | 100 | /* exported functions */ | 
 | 101 | int snd_emu8000_new(struct snd_card *card, int device, long port, int seq_ports, | 
 | 102 | 		    struct snd_seq_device **ret); | 
 | 103 | void snd_emu8000_poke(struct snd_emu8000 *emu, unsigned int port, unsigned int reg, | 
 | 104 | 		      unsigned int val); | 
 | 105 | unsigned short snd_emu8000_peek(struct snd_emu8000 *emu, unsigned int port, | 
 | 106 | 				unsigned int reg); | 
 | 107 | void snd_emu8000_poke_dw(struct snd_emu8000 *emu, unsigned int port, unsigned int reg, | 
 | 108 | 			 unsigned int val); | 
 | 109 | unsigned int snd_emu8000_peek_dw(struct snd_emu8000 *emu, unsigned int port, | 
 | 110 | 				 unsigned int reg); | 
 | 111 | void snd_emu8000_dma_chan(struct snd_emu8000 *emu, int ch, int mode); | 
 | 112 |  | 
 | 113 | void snd_emu8000_init_fm(struct snd_emu8000 *emu); | 
 | 114 |  | 
 | 115 | void snd_emu8000_update_chorus_mode(struct snd_emu8000 *emu); | 
 | 116 | void snd_emu8000_update_reverb_mode(struct snd_emu8000 *emu); | 
 | 117 | void snd_emu8000_update_equalizer(struct snd_emu8000 *emu); | 
 | 118 | int snd_emu8000_load_chorus_fx(struct snd_emu8000 *emu, int mode, const void __user *buf, long len); | 
 | 119 | int snd_emu8000_load_reverb_fx(struct snd_emu8000 *emu, int mode, const void __user *buf, long len); | 
 | 120 |  | 
 | 121 | #endif /* __SOUND_EMU8000_H */ |