| lh | 9ed821d | 2023-04-07 01:36:19 -0700 | [diff] [blame] | 1 | /* | 
 | 2 |  * Copyright (C) ST-Ericsson SA 2010 | 
 | 3 |  * Author: Mattias Wallin <mattias.wallin@stericsson.com> for ST-Ericsson. | 
 | 4 |  * License Terms: GNU General Public License v2 | 
 | 5 |  * This file was based on drivers/mfd/ab8500-spi.c | 
 | 6 |  */ | 
 | 7 |  | 
 | 8 | #include <linux/kernel.h> | 
 | 9 | #include <linux/slab.h> | 
 | 10 | #include <linux/init.h> | 
 | 11 | #include <linux/module.h> | 
 | 12 | #include <linux/platform_device.h> | 
 | 13 | #include <linux/mfd/abx500/ab8500.h> | 
 | 14 | #include <linux/mfd/dbx500-prcmu.h> | 
 | 15 |  | 
 | 16 | static int ab8500_i2c_write(struct ab8500 *ab8500, u16 addr, u8 data) | 
 | 17 | { | 
 | 18 | 	int ret; | 
 | 19 |  | 
 | 20 | 	ret = prcmu_abb_write((u8)(addr >> 8), (u8)(addr & 0xFF), &data, 1); | 
 | 21 | 	if (ret < 0) | 
 | 22 | 		dev_err(ab8500->dev, "prcmu i2c error %d\n", ret); | 
 | 23 | 	return ret; | 
 | 24 | } | 
 | 25 |  | 
 | 26 | static int ab8500_i2c_write_masked(struct ab8500 *ab8500, u16 addr, u8 mask, | 
 | 27 | 	u8 data) | 
 | 28 | { | 
 | 29 | 	int ret; | 
 | 30 |  | 
 | 31 | 	ret = prcmu_abb_write_masked((u8)(addr >> 8), (u8)(addr & 0xFF), &data, | 
 | 32 | 		&mask, 1); | 
 | 33 | 	if (ret < 0) | 
 | 34 | 		dev_err(ab8500->dev, "prcmu i2c error %d\n", ret); | 
 | 35 | 	return ret; | 
 | 36 | } | 
 | 37 |  | 
 | 38 | static int ab8500_i2c_read(struct ab8500 *ab8500, u16 addr) | 
 | 39 | { | 
 | 40 | 	int ret; | 
 | 41 | 	u8 data; | 
 | 42 |  | 
 | 43 | 	ret = prcmu_abb_read((u8)(addr >> 8), (u8)(addr & 0xFF), &data, 1); | 
 | 44 | 	if (ret < 0) { | 
 | 45 | 		dev_err(ab8500->dev, "prcmu i2c error %d\n", ret); | 
 | 46 | 		return ret; | 
 | 47 | 	} | 
 | 48 | 	return (int)data; | 
 | 49 | } | 
 | 50 |  | 
 | 51 | static int __devinit ab8500_i2c_probe(struct platform_device *plf) | 
 | 52 | { | 
 | 53 | 	const struct platform_device_id *platid = platform_get_device_id(plf); | 
 | 54 | 	struct ab8500 *ab8500; | 
 | 55 | 	struct resource *resource; | 
 | 56 | 	int ret; | 
 | 57 |  | 
 | 58 | 	ab8500 = kzalloc(sizeof *ab8500, GFP_KERNEL); | 
 | 59 | 	if (!ab8500) | 
 | 60 | 		return -ENOMEM; | 
 | 61 |  | 
 | 62 | 	ab8500->dev = &plf->dev; | 
 | 63 |  | 
 | 64 | 	resource = platform_get_resource(plf, IORESOURCE_IRQ, 0); | 
 | 65 | 	if (!resource) { | 
 | 66 | 		kfree(ab8500); | 
 | 67 | 		return -ENODEV; | 
 | 68 | 	} | 
 | 69 |  | 
 | 70 | 	ab8500->irq = resource->start; | 
 | 71 |  | 
 | 72 | 	ab8500->read = ab8500_i2c_read; | 
 | 73 | 	ab8500->write = ab8500_i2c_write; | 
 | 74 | 	ab8500->write_masked = ab8500_i2c_write_masked; | 
 | 75 |  | 
 | 76 | 	platform_set_drvdata(plf, ab8500); | 
 | 77 |  | 
 | 78 | 	ret = ab8500_init(ab8500, platid->driver_data); | 
 | 79 | 	if (ret) | 
 | 80 | 		kfree(ab8500); | 
 | 81 |  | 
 | 82 |  | 
 | 83 | 	return ret; | 
 | 84 | } | 
 | 85 |  | 
 | 86 | static int __devexit ab8500_i2c_remove(struct platform_device *plf) | 
 | 87 | { | 
 | 88 | 	struct ab8500 *ab8500 = platform_get_drvdata(plf); | 
 | 89 |  | 
 | 90 | 	ab8500_exit(ab8500); | 
 | 91 | 	kfree(ab8500); | 
 | 92 |  | 
 | 93 | 	return 0; | 
 | 94 | } | 
 | 95 |  | 
 | 96 | static const struct platform_device_id ab8500_id[] = { | 
 | 97 | 	{ "ab8500-i2c", AB8500_VERSION_AB8500 }, | 
 | 98 | 	{ "ab8505-i2c", AB8500_VERSION_AB8505 }, | 
 | 99 | 	{ "ab9540-i2c", AB8500_VERSION_AB9540 }, | 
 | 100 | 	{ "ab8540-i2c", AB8500_VERSION_AB8540 }, | 
 | 101 | 	{ } | 
 | 102 | }; | 
 | 103 |  | 
 | 104 | static struct platform_driver ab8500_i2c_driver = { | 
 | 105 | 	.driver = { | 
 | 106 | 		.name = "ab8500-i2c", | 
 | 107 | 		.owner = THIS_MODULE, | 
 | 108 | 	}, | 
 | 109 | 	.probe	= ab8500_i2c_probe, | 
 | 110 | 	.remove	= __devexit_p(ab8500_i2c_remove), | 
 | 111 | 	.id_table = ab8500_id, | 
 | 112 | }; | 
 | 113 |  | 
 | 114 | static int __init ab8500_i2c_init(void) | 
 | 115 | { | 
 | 116 | 	return platform_driver_register(&ab8500_i2c_driver); | 
 | 117 | } | 
 | 118 |  | 
 | 119 | static void __exit ab8500_i2c_exit(void) | 
 | 120 | { | 
 | 121 | 	platform_driver_unregister(&ab8500_i2c_driver); | 
 | 122 | } | 
 | 123 | arch_initcall(ab8500_i2c_init); | 
 | 124 | module_exit(ab8500_i2c_exit); | 
 | 125 |  | 
 | 126 | MODULE_AUTHOR("Mattias WALLIN <mattias.wallin@stericsson.com"); | 
 | 127 | MODULE_DESCRIPTION("AB8500 Core access via PRCMU I2C"); | 
 | 128 | MODULE_LICENSE("GPL v2"); |