| lh | 9ed821d | 2023-04-07 01:36:19 -0700 | [diff] [blame] | 1 | /* | 
|  | 2 | * LP5521 LED chip driver. | 
|  | 3 | * | 
|  | 4 | * Copyright (C) 2010 Nokia Corporation | 
|  | 5 | * | 
|  | 6 | * Contact: Samu Onkalo <samu.p.onkalo@nokia.com> | 
|  | 7 | * | 
|  | 8 | * This program is free software; you can redistribute it and/or | 
|  | 9 | * modify it under the terms of the GNU General Public License | 
|  | 10 | * version 2 as published by the Free Software Foundation. | 
|  | 11 | * | 
|  | 12 | * This program is distributed in the hope that it will be useful, but | 
|  | 13 | * WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | 14 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the GNU | 
|  | 15 | * General Public License for more details. | 
|  | 16 | * | 
|  | 17 | * You should have received a copy of the GNU General Public License | 
|  | 18 | * along with this program; if not, write to the Free Software | 
|  | 19 | * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA | 
|  | 20 | * 02110-1301 USA | 
|  | 21 | */ | 
|  | 22 |  | 
|  | 23 | #include <linux/module.h> | 
|  | 24 | #include <linux/init.h> | 
|  | 25 | #include <linux/i2c.h> | 
|  | 26 | #include <linux/mutex.h> | 
|  | 27 | #include <linux/gpio.h> | 
|  | 28 | #include <linux/interrupt.h> | 
|  | 29 | #include <linux/delay.h> | 
|  | 30 | #include <linux/ctype.h> | 
|  | 31 | #include <linux/spinlock.h> | 
|  | 32 | #include <linux/wait.h> | 
|  | 33 | #include <linux/leds.h> | 
|  | 34 | #include <linux/leds-lp5521.h> | 
|  | 35 | #include <linux/workqueue.h> | 
|  | 36 | #include <linux/slab.h> | 
|  | 37 |  | 
|  | 38 | #define LP5521_PROGRAM_LENGTH		32	/* in bytes */ | 
|  | 39 |  | 
|  | 40 | #define LP5521_MAX_LEDS			3	/* Maximum number of LEDs */ | 
|  | 41 | #define LP5521_MAX_ENGINES		3	/* Maximum number of engines */ | 
|  | 42 |  | 
|  | 43 | #define LP5521_ENG_MASK_BASE		0x30	/* 00110000 */ | 
|  | 44 | #define LP5521_ENG_STATUS_MASK		0x07	/* 00000111 */ | 
|  | 45 |  | 
|  | 46 | #define LP5521_CMD_LOAD			0x15	/* 00010101 */ | 
|  | 47 | #define LP5521_CMD_RUN			0x2a	/* 00101010 */ | 
|  | 48 | #define LP5521_CMD_DIRECT		0x3f	/* 00111111 */ | 
|  | 49 | #define LP5521_CMD_DISABLED		0x00	/* 00000000 */ | 
|  | 50 |  | 
|  | 51 | /* Registers */ | 
|  | 52 | #define LP5521_REG_ENABLE		0x00 | 
|  | 53 | #define LP5521_REG_OP_MODE		0x01 | 
|  | 54 | #define LP5521_REG_R_PWM		0x02 | 
|  | 55 | #define LP5521_REG_G_PWM		0x03 | 
|  | 56 | #define LP5521_REG_B_PWM		0x04 | 
|  | 57 | #define LP5521_REG_R_CURRENT		0x05 | 
|  | 58 | #define LP5521_REG_G_CURRENT		0x06 | 
|  | 59 | #define LP5521_REG_B_CURRENT		0x07 | 
|  | 60 | #define LP5521_REG_CONFIG		0x08 | 
|  | 61 | #define LP5521_REG_R_CHANNEL_PC		0x09 | 
|  | 62 | #define LP5521_REG_G_CHANNEL_PC		0x0A | 
|  | 63 | #define LP5521_REG_B_CHANNEL_PC		0x0B | 
|  | 64 | #define LP5521_REG_STATUS		0x0C | 
|  | 65 | #define LP5521_REG_RESET		0x0D | 
|  | 66 | #define LP5521_REG_GPO			0x0E | 
|  | 67 | #define LP5521_REG_R_PROG_MEM		0x10 | 
|  | 68 | #define LP5521_REG_G_PROG_MEM		0x30 | 
|  | 69 | #define LP5521_REG_B_PROG_MEM		0x50 | 
|  | 70 |  | 
|  | 71 | #define LP5521_PROG_MEM_BASE		LP5521_REG_R_PROG_MEM | 
|  | 72 | #define LP5521_PROG_MEM_SIZE		0x20 | 
|  | 73 |  | 
|  | 74 | /* Base register to set LED current */ | 
|  | 75 | #define LP5521_REG_LED_CURRENT_BASE	LP5521_REG_R_CURRENT | 
|  | 76 |  | 
|  | 77 | /* Base register to set the brightness */ | 
|  | 78 | #define LP5521_REG_LED_PWM_BASE		LP5521_REG_R_PWM | 
|  | 79 |  | 
|  | 80 | /* Bits in ENABLE register */ | 
|  | 81 | #define LP5521_MASTER_ENABLE		0x40	/* Chip master enable */ | 
|  | 82 | #define LP5521_LOGARITHMIC_PWM		0x80	/* Logarithmic PWM adjustment */ | 
|  | 83 | #define LP5521_EXEC_RUN			0x2A | 
|  | 84 | #define LP5521_ENABLE_DEFAULT	\ | 
|  | 85 | (LP5521_MASTER_ENABLE | LP5521_LOGARITHMIC_PWM) | 
|  | 86 | #define LP5521_ENABLE_RUN_PROGRAM	\ | 
|  | 87 | (LP5521_ENABLE_DEFAULT | LP5521_EXEC_RUN) | 
|  | 88 |  | 
|  | 89 | /* Status */ | 
|  | 90 | #define LP5521_EXT_CLK_USED		0x08 | 
|  | 91 |  | 
|  | 92 | /* default R channel current register value */ | 
|  | 93 | #define LP5521_REG_R_CURR_DEFAULT	0xAF | 
|  | 94 |  | 
|  | 95 | /* Pattern Mode */ | 
|  | 96 | #define PATTERN_OFF	0 | 
|  | 97 |  | 
|  | 98 | struct lp5521_engine { | 
|  | 99 | int		id; | 
|  | 100 | u8		mode; | 
|  | 101 | u8		prog_page; | 
|  | 102 | u8		engine_mask; | 
|  | 103 | }; | 
|  | 104 |  | 
|  | 105 | struct lp5521_led { | 
|  | 106 | int			id; | 
|  | 107 | u8			chan_nr; | 
|  | 108 | u8			led_current; | 
|  | 109 | u8			max_current; | 
|  | 110 | struct led_classdev	cdev; | 
|  | 111 | struct work_struct	brightness_work; | 
|  | 112 | u8			brightness; | 
|  | 113 | }; | 
|  | 114 |  | 
|  | 115 | struct lp5521_chip { | 
|  | 116 | struct lp5521_platform_data *pdata; | 
|  | 117 | struct mutex		lock; /* Serialize control */ | 
|  | 118 | struct i2c_client	*client; | 
|  | 119 | struct lp5521_engine	engines[LP5521_MAX_ENGINES]; | 
|  | 120 | struct lp5521_led	leds[LP5521_MAX_LEDS]; | 
|  | 121 | u8			num_channels; | 
|  | 122 | u8			num_leds; | 
|  | 123 | }; | 
|  | 124 |  | 
|  | 125 | static inline struct lp5521_led *cdev_to_led(struct led_classdev *cdev) | 
|  | 126 | { | 
|  | 127 | return container_of(cdev, struct lp5521_led, cdev); | 
|  | 128 | } | 
|  | 129 |  | 
|  | 130 | static inline struct lp5521_chip *engine_to_lp5521(struct lp5521_engine *engine) | 
|  | 131 | { | 
|  | 132 | return container_of(engine, struct lp5521_chip, | 
|  | 133 | engines[engine->id - 1]); | 
|  | 134 | } | 
|  | 135 |  | 
|  | 136 | static inline struct lp5521_chip *led_to_lp5521(struct lp5521_led *led) | 
|  | 137 | { | 
|  | 138 | return container_of(led, struct lp5521_chip, | 
|  | 139 | leds[led->id]); | 
|  | 140 | } | 
|  | 141 |  | 
|  | 142 | static void lp5521_led_brightness_work(struct work_struct *work); | 
|  | 143 |  | 
|  | 144 | static inline int lp5521_write(struct i2c_client *client, u8 reg, u8 value) | 
|  | 145 | { | 
|  | 146 | return i2c_smbus_write_byte_data(client, reg, value); | 
|  | 147 | } | 
|  | 148 |  | 
|  | 149 | static int lp5521_read(struct i2c_client *client, u8 reg, u8 *buf) | 
|  | 150 | { | 
|  | 151 | s32 ret; | 
|  | 152 |  | 
|  | 153 | ret = i2c_smbus_read_byte_data(client, reg); | 
|  | 154 | if (ret < 0) | 
|  | 155 | return -EIO; | 
|  | 156 |  | 
|  | 157 | *buf = ret; | 
|  | 158 | return 0; | 
|  | 159 | } | 
|  | 160 |  | 
|  | 161 | static int lp5521_set_engine_mode(struct lp5521_engine *engine, u8 mode) | 
|  | 162 | { | 
|  | 163 | struct lp5521_chip *chip = engine_to_lp5521(engine); | 
|  | 164 | struct i2c_client *client = chip->client; | 
|  | 165 | int ret; | 
|  | 166 | u8 engine_state; | 
|  | 167 |  | 
|  | 168 | /* Only transition between RUN and DIRECT mode are handled here */ | 
|  | 169 | if (mode == LP5521_CMD_LOAD) | 
|  | 170 | return 0; | 
|  | 171 |  | 
|  | 172 | if (mode == LP5521_CMD_DISABLED) | 
|  | 173 | mode = LP5521_CMD_DIRECT; | 
|  | 174 |  | 
|  | 175 | ret = lp5521_read(client, LP5521_REG_OP_MODE, &engine_state); | 
|  | 176 | if (ret < 0) | 
|  | 177 | return ret; | 
|  | 178 |  | 
|  | 179 | /* set mode only for this engine */ | 
|  | 180 | engine_state &= ~(engine->engine_mask); | 
|  | 181 | mode &= engine->engine_mask; | 
|  | 182 | engine_state |= mode; | 
|  | 183 | return lp5521_write(client, LP5521_REG_OP_MODE, engine_state); | 
|  | 184 | } | 
|  | 185 |  | 
|  | 186 | static int lp5521_load_program(struct lp5521_engine *eng, const u8 *pattern) | 
|  | 187 | { | 
|  | 188 | struct lp5521_chip *chip = engine_to_lp5521(eng); | 
|  | 189 | struct i2c_client *client = chip->client; | 
|  | 190 | int ret; | 
|  | 191 | int addr; | 
|  | 192 | u8 mode; | 
|  | 193 |  | 
|  | 194 | /* move current engine to direct mode and remember the state */ | 
|  | 195 | ret = lp5521_set_engine_mode(eng, LP5521_CMD_DIRECT); | 
|  | 196 | if (ret) | 
|  | 197 | return ret; | 
|  | 198 |  | 
|  | 199 | /* Mode change requires min 500 us delay. 1 - 2 ms  with margin */ | 
|  | 200 | usleep_range(1000, 2000); | 
|  | 201 | ret = lp5521_read(client, LP5521_REG_OP_MODE, &mode); | 
|  | 202 | if (ret) | 
|  | 203 | return ret; | 
|  | 204 |  | 
|  | 205 | /* For loading, all the engines to load mode */ | 
|  | 206 | lp5521_write(client, LP5521_REG_OP_MODE, LP5521_CMD_DIRECT); | 
|  | 207 | /* Mode change requires min 500 us delay. 1 - 2 ms  with margin */ | 
|  | 208 | usleep_range(1000, 2000); | 
|  | 209 | lp5521_write(client, LP5521_REG_OP_MODE, LP5521_CMD_LOAD); | 
|  | 210 | /* Mode change requires min 500 us delay. 1 - 2 ms  with margin */ | 
|  | 211 | usleep_range(1000, 2000); | 
|  | 212 |  | 
|  | 213 | addr = LP5521_PROG_MEM_BASE + eng->prog_page * LP5521_PROG_MEM_SIZE; | 
|  | 214 | i2c_smbus_write_i2c_block_data(client, | 
|  | 215 | addr, | 
|  | 216 | LP5521_PROG_MEM_SIZE, | 
|  | 217 | pattern); | 
|  | 218 |  | 
|  | 219 | return lp5521_write(client, LP5521_REG_OP_MODE, mode); | 
|  | 220 | } | 
|  | 221 |  | 
|  | 222 | static int lp5521_set_led_current(struct lp5521_chip *chip, int led, u8 curr) | 
|  | 223 | { | 
|  | 224 | return lp5521_write(chip->client, | 
|  | 225 | LP5521_REG_LED_CURRENT_BASE + chip->leds[led].chan_nr, | 
|  | 226 | curr); | 
|  | 227 | } | 
|  | 228 |  | 
|  | 229 | static void lp5521_init_engine(struct lp5521_chip *chip) | 
|  | 230 | { | 
|  | 231 | int i; | 
|  | 232 | for (i = 0; i < ARRAY_SIZE(chip->engines); i++) { | 
|  | 233 | chip->engines[i].id = i + 1; | 
|  | 234 | chip->engines[i].engine_mask = LP5521_ENG_MASK_BASE >> (i * 2); | 
|  | 235 | chip->engines[i].prog_page = i; | 
|  | 236 | } | 
|  | 237 | } | 
|  | 238 |  | 
|  | 239 | static int lp5521_configure(struct i2c_client *client) | 
|  | 240 | { | 
|  | 241 | struct lp5521_chip *chip = i2c_get_clientdata(client); | 
|  | 242 | int ret; | 
|  | 243 | u8 cfg; | 
|  | 244 |  | 
|  | 245 | lp5521_init_engine(chip); | 
|  | 246 |  | 
|  | 247 | /* Set all PWMs to direct control mode */ | 
|  | 248 | ret = lp5521_write(client, LP5521_REG_OP_MODE, LP5521_CMD_DIRECT); | 
|  | 249 |  | 
|  | 250 | cfg = chip->pdata->update_config ? | 
|  | 251 | : (LP5521_PWRSAVE_EN | LP5521_CP_MODE_AUTO | LP5521_R_TO_BATT); | 
|  | 252 | ret |= lp5521_write(client, LP5521_REG_CONFIG, cfg); | 
|  | 253 |  | 
|  | 254 | /* Initialize all channels PWM to zero -> leds off */ | 
|  | 255 | ret |= lp5521_write(client, LP5521_REG_R_PWM, 0); | 
|  | 256 | ret |= lp5521_write(client, LP5521_REG_G_PWM, 0); | 
|  | 257 | ret |= lp5521_write(client, LP5521_REG_B_PWM, 0); | 
|  | 258 |  | 
|  | 259 | /* Set engines are set to run state when OP_MODE enables engines */ | 
|  | 260 | ret |= lp5521_write(client, LP5521_REG_ENABLE, | 
|  | 261 | LP5521_ENABLE_RUN_PROGRAM); | 
|  | 262 | /* enable takes 500us. 1 - 2 ms leaves some margin */ | 
|  | 263 | usleep_range(1000, 2000); | 
|  | 264 |  | 
|  | 265 | return ret; | 
|  | 266 | } | 
|  | 267 |  | 
|  | 268 | static int lp5521_run_selftest(struct lp5521_chip *chip, char *buf) | 
|  | 269 | { | 
|  | 270 | int ret; | 
|  | 271 | u8 status; | 
|  | 272 |  | 
|  | 273 | ret = lp5521_read(chip->client, LP5521_REG_STATUS, &status); | 
|  | 274 | if (ret < 0) | 
|  | 275 | return ret; | 
|  | 276 |  | 
|  | 277 | /* Check that ext clock is really in use if requested */ | 
|  | 278 | if (chip->pdata && chip->pdata->clock_mode == LP5521_CLOCK_EXT) | 
|  | 279 | if  ((status & LP5521_EXT_CLK_USED) == 0) | 
|  | 280 | return -EIO; | 
|  | 281 | return 0; | 
|  | 282 | } | 
|  | 283 |  | 
|  | 284 | static void lp5521_set_brightness(struct led_classdev *cdev, | 
|  | 285 | enum led_brightness brightness) | 
|  | 286 | { | 
|  | 287 | struct lp5521_led *led = cdev_to_led(cdev); | 
|  | 288 | led->brightness = (u8)brightness; | 
|  | 289 | schedule_work(&led->brightness_work); | 
|  | 290 | } | 
|  | 291 |  | 
|  | 292 | static void lp5521_led_brightness_work(struct work_struct *work) | 
|  | 293 | { | 
|  | 294 | struct lp5521_led *led = container_of(work, | 
|  | 295 | struct lp5521_led, | 
|  | 296 | brightness_work); | 
|  | 297 | struct lp5521_chip *chip = led_to_lp5521(led); | 
|  | 298 | struct i2c_client *client = chip->client; | 
|  | 299 |  | 
|  | 300 | mutex_lock(&chip->lock); | 
|  | 301 | lp5521_write(client, LP5521_REG_LED_PWM_BASE + led->chan_nr, | 
|  | 302 | led->brightness); | 
|  | 303 | mutex_unlock(&chip->lock); | 
|  | 304 | } | 
|  | 305 |  | 
|  | 306 | /* Detect the chip by setting its ENABLE register and reading it back. */ | 
|  | 307 | static int lp5521_detect(struct i2c_client *client) | 
|  | 308 | { | 
|  | 309 | int ret; | 
|  | 310 | u8 buf; | 
|  | 311 |  | 
|  | 312 | ret = lp5521_write(client, LP5521_REG_ENABLE, LP5521_ENABLE_DEFAULT); | 
|  | 313 | if (ret) | 
|  | 314 | return ret; | 
|  | 315 | /* enable takes 500us. 1 - 2 ms leaves some margin */ | 
|  | 316 | usleep_range(1000, 2000); | 
|  | 317 | ret = lp5521_read(client, LP5521_REG_ENABLE, &buf); | 
|  | 318 | if (ret) | 
|  | 319 | return ret; | 
|  | 320 | if (buf != LP5521_ENABLE_DEFAULT) | 
|  | 321 | return -ENODEV; | 
|  | 322 |  | 
|  | 323 | return 0; | 
|  | 324 | } | 
|  | 325 |  | 
|  | 326 | /* Set engine mode and create appropriate sysfs attributes, if required. */ | 
|  | 327 | static int lp5521_set_mode(struct lp5521_engine *engine, u8 mode) | 
|  | 328 | { | 
|  | 329 | int ret = 0; | 
|  | 330 |  | 
|  | 331 | /* if in that mode already do nothing, except for run */ | 
|  | 332 | if (mode == engine->mode && mode != LP5521_CMD_RUN) | 
|  | 333 | return 0; | 
|  | 334 |  | 
|  | 335 | if (mode == LP5521_CMD_RUN) { | 
|  | 336 | ret = lp5521_set_engine_mode(engine, LP5521_CMD_RUN); | 
|  | 337 | } else if (mode == LP5521_CMD_LOAD) { | 
|  | 338 | lp5521_set_engine_mode(engine, LP5521_CMD_DISABLED); | 
|  | 339 | lp5521_set_engine_mode(engine, LP5521_CMD_LOAD); | 
|  | 340 | } else if (mode == LP5521_CMD_DISABLED) { | 
|  | 341 | lp5521_set_engine_mode(engine, LP5521_CMD_DISABLED); | 
|  | 342 | } | 
|  | 343 |  | 
|  | 344 | engine->mode = mode; | 
|  | 345 |  | 
|  | 346 | return ret; | 
|  | 347 | } | 
|  | 348 |  | 
|  | 349 | static int lp5521_do_store_load(struct lp5521_engine *engine, | 
|  | 350 | const char *buf, size_t len) | 
|  | 351 | { | 
|  | 352 | struct lp5521_chip *chip = engine_to_lp5521(engine); | 
|  | 353 | struct i2c_client *client = chip->client; | 
|  | 354 | int  ret, nrchars, offset = 0, i = 0; | 
|  | 355 | char c[3]; | 
|  | 356 | unsigned cmd; | 
|  | 357 | u8 pattern[LP5521_PROGRAM_LENGTH] = {0}; | 
|  | 358 |  | 
|  | 359 | while ((offset < len - 1) && (i < LP5521_PROGRAM_LENGTH)) { | 
|  | 360 | /* separate sscanfs because length is working only for %s */ | 
|  | 361 | ret = sscanf(buf + offset, "%2s%n ", c, &nrchars); | 
|  | 362 | if (ret != 2) | 
|  | 363 | goto fail; | 
|  | 364 | ret = sscanf(c, "%2x", &cmd); | 
|  | 365 | if (ret != 1) | 
|  | 366 | goto fail; | 
|  | 367 | pattern[i] = (u8)cmd; | 
|  | 368 |  | 
|  | 369 | offset += nrchars; | 
|  | 370 | i++; | 
|  | 371 | } | 
|  | 372 |  | 
|  | 373 | /* Each instruction is 16bit long. Check that length is even */ | 
|  | 374 | if (i % 2) | 
|  | 375 | goto fail; | 
|  | 376 |  | 
|  | 377 | mutex_lock(&chip->lock); | 
|  | 378 | if (engine->mode == LP5521_CMD_LOAD) | 
|  | 379 | ret = lp5521_load_program(engine, pattern); | 
|  | 380 | else | 
|  | 381 | ret = -EINVAL; | 
|  | 382 | mutex_unlock(&chip->lock); | 
|  | 383 |  | 
|  | 384 | if (ret) { | 
|  | 385 | dev_err(&client->dev, "failed loading pattern\n"); | 
|  | 386 | return ret; | 
|  | 387 | } | 
|  | 388 |  | 
|  | 389 | return len; | 
|  | 390 | fail: | 
|  | 391 | dev_err(&client->dev, "wrong pattern format\n"); | 
|  | 392 | return -EINVAL; | 
|  | 393 | } | 
|  | 394 |  | 
|  | 395 | static ssize_t store_engine_load(struct device *dev, | 
|  | 396 | struct device_attribute *attr, | 
|  | 397 | const char *buf, size_t len, int nr) | 
|  | 398 | { | 
|  | 399 | struct i2c_client *client = to_i2c_client(dev); | 
|  | 400 | struct lp5521_chip *chip = i2c_get_clientdata(client); | 
|  | 401 | return lp5521_do_store_load(&chip->engines[nr - 1], buf, len); | 
|  | 402 | } | 
|  | 403 |  | 
|  | 404 | #define store_load(nr)							\ | 
|  | 405 | static ssize_t store_engine##nr##_load(struct device *dev,		\ | 
|  | 406 | struct device_attribute *attr,	\ | 
|  | 407 | const char *buf, size_t len)	\ | 
|  | 408 | {									\ | 
|  | 409 | return store_engine_load(dev, attr, buf, len, nr);		\ | 
|  | 410 | } | 
|  | 411 | store_load(1) | 
|  | 412 | store_load(2) | 
|  | 413 | store_load(3) | 
|  | 414 |  | 
|  | 415 | static ssize_t show_engine_mode(struct device *dev, | 
|  | 416 | struct device_attribute *attr, | 
|  | 417 | char *buf, int nr) | 
|  | 418 | { | 
|  | 419 | struct i2c_client *client = to_i2c_client(dev); | 
|  | 420 | struct lp5521_chip *chip = i2c_get_clientdata(client); | 
|  | 421 | switch (chip->engines[nr - 1].mode) { | 
|  | 422 | case LP5521_CMD_RUN: | 
|  | 423 | return sprintf(buf, "run\n"); | 
|  | 424 | case LP5521_CMD_LOAD: | 
|  | 425 | return sprintf(buf, "load\n"); | 
|  | 426 | case LP5521_CMD_DISABLED: | 
|  | 427 | return sprintf(buf, "disabled\n"); | 
|  | 428 | default: | 
|  | 429 | return sprintf(buf, "disabled\n"); | 
|  | 430 | } | 
|  | 431 | } | 
|  | 432 |  | 
|  | 433 | #define show_mode(nr)							\ | 
|  | 434 | static ssize_t show_engine##nr##_mode(struct device *dev,		\ | 
|  | 435 | struct device_attribute *attr,	\ | 
|  | 436 | char *buf)				\ | 
|  | 437 | {									\ | 
|  | 438 | return show_engine_mode(dev, attr, buf, nr);			\ | 
|  | 439 | } | 
|  | 440 | show_mode(1) | 
|  | 441 | show_mode(2) | 
|  | 442 | show_mode(3) | 
|  | 443 |  | 
|  | 444 | static ssize_t store_engine_mode(struct device *dev, | 
|  | 445 | struct device_attribute *attr, | 
|  | 446 | const char *buf, size_t len, int nr) | 
|  | 447 | { | 
|  | 448 | struct i2c_client *client = to_i2c_client(dev); | 
|  | 449 | struct lp5521_chip *chip = i2c_get_clientdata(client); | 
|  | 450 | struct lp5521_engine *engine = &chip->engines[nr - 1]; | 
|  | 451 | mutex_lock(&chip->lock); | 
|  | 452 |  | 
|  | 453 | if (!strncmp(buf, "run", 3)) | 
|  | 454 | lp5521_set_mode(engine, LP5521_CMD_RUN); | 
|  | 455 | else if (!strncmp(buf, "load", 4)) | 
|  | 456 | lp5521_set_mode(engine, LP5521_CMD_LOAD); | 
|  | 457 | else if (!strncmp(buf, "disabled", 8)) | 
|  | 458 | lp5521_set_mode(engine, LP5521_CMD_DISABLED); | 
|  | 459 |  | 
|  | 460 | mutex_unlock(&chip->lock); | 
|  | 461 | return len; | 
|  | 462 | } | 
|  | 463 |  | 
|  | 464 | #define store_mode(nr)							\ | 
|  | 465 | static ssize_t store_engine##nr##_mode(struct device *dev,		\ | 
|  | 466 | struct device_attribute *attr,	\ | 
|  | 467 | const char *buf, size_t len)	\ | 
|  | 468 | {									\ | 
|  | 469 | return store_engine_mode(dev, attr, buf, len, nr);		\ | 
|  | 470 | } | 
|  | 471 | store_mode(1) | 
|  | 472 | store_mode(2) | 
|  | 473 | store_mode(3) | 
|  | 474 |  | 
|  | 475 | static ssize_t show_max_current(struct device *dev, | 
|  | 476 | struct device_attribute *attr, | 
|  | 477 | char *buf) | 
|  | 478 | { | 
|  | 479 | struct led_classdev *led_cdev = dev_get_drvdata(dev); | 
|  | 480 | struct lp5521_led *led = cdev_to_led(led_cdev); | 
|  | 481 |  | 
|  | 482 | return sprintf(buf, "%d\n", led->max_current); | 
|  | 483 | } | 
|  | 484 |  | 
|  | 485 | static ssize_t show_current(struct device *dev, | 
|  | 486 | struct device_attribute *attr, | 
|  | 487 | char *buf) | 
|  | 488 | { | 
|  | 489 | struct led_classdev *led_cdev = dev_get_drvdata(dev); | 
|  | 490 | struct lp5521_led *led = cdev_to_led(led_cdev); | 
|  | 491 |  | 
|  | 492 | return sprintf(buf, "%d\n", led->led_current); | 
|  | 493 | } | 
|  | 494 |  | 
|  | 495 | static ssize_t store_current(struct device *dev, | 
|  | 496 | struct device_attribute *attr, | 
|  | 497 | const char *buf, size_t len) | 
|  | 498 | { | 
|  | 499 | struct led_classdev *led_cdev = dev_get_drvdata(dev); | 
|  | 500 | struct lp5521_led *led = cdev_to_led(led_cdev); | 
|  | 501 | struct lp5521_chip *chip = led_to_lp5521(led); | 
|  | 502 | ssize_t ret; | 
|  | 503 | unsigned long curr; | 
|  | 504 |  | 
|  | 505 | if (kstrtoul(buf, 0, &curr)) | 
|  | 506 | return -EINVAL; | 
|  | 507 |  | 
|  | 508 | if (curr > led->max_current) | 
|  | 509 | return -EINVAL; | 
|  | 510 |  | 
|  | 511 | mutex_lock(&chip->lock); | 
|  | 512 | ret = lp5521_set_led_current(chip, led->id, curr); | 
|  | 513 | mutex_unlock(&chip->lock); | 
|  | 514 |  | 
|  | 515 | if (ret < 0) | 
|  | 516 | return ret; | 
|  | 517 |  | 
|  | 518 | led->led_current = (u8)curr; | 
|  | 519 |  | 
|  | 520 | return len; | 
|  | 521 | } | 
|  | 522 |  | 
|  | 523 | static ssize_t lp5521_selftest(struct device *dev, | 
|  | 524 | struct device_attribute *attr, | 
|  | 525 | char *buf) | 
|  | 526 | { | 
|  | 527 | struct i2c_client *client = to_i2c_client(dev); | 
|  | 528 | struct lp5521_chip *chip = i2c_get_clientdata(client); | 
|  | 529 | int ret; | 
|  | 530 |  | 
|  | 531 | mutex_lock(&chip->lock); | 
|  | 532 | ret = lp5521_run_selftest(chip, buf); | 
|  | 533 | mutex_unlock(&chip->lock); | 
|  | 534 | return sprintf(buf, "%s\n", ret ? "FAIL" : "OK"); | 
|  | 535 | } | 
|  | 536 |  | 
|  | 537 | static void lp5521_clear_program_memory(struct i2c_client *cl) | 
|  | 538 | { | 
|  | 539 | int i; | 
|  | 540 | u8 rgb_mem[] = { | 
|  | 541 | LP5521_REG_R_PROG_MEM, | 
|  | 542 | LP5521_REG_G_PROG_MEM, | 
|  | 543 | LP5521_REG_B_PROG_MEM, | 
|  | 544 | }; | 
|  | 545 |  | 
|  | 546 | for (i = 0; i < ARRAY_SIZE(rgb_mem); i++) { | 
|  | 547 | lp5521_write(cl, rgb_mem[i], 0); | 
|  | 548 | lp5521_write(cl, rgb_mem[i] + 1, 0); | 
|  | 549 | } | 
|  | 550 | } | 
|  | 551 |  | 
|  | 552 | static void lp5521_write_program_memory(struct i2c_client *cl, | 
|  | 553 | u8 base, u8 *rgb, int size) | 
|  | 554 | { | 
|  | 555 | int i; | 
|  | 556 |  | 
|  | 557 | if (!rgb || size <= 0) | 
|  | 558 | return; | 
|  | 559 |  | 
|  | 560 | for (i = 0; i < size; i++) | 
|  | 561 | lp5521_write(cl, base + i, *(rgb + i)); | 
|  | 562 |  | 
|  | 563 | lp5521_write(cl, base + i, 0); | 
|  | 564 | lp5521_write(cl, base + i + 1, 0); | 
|  | 565 | } | 
|  | 566 |  | 
|  | 567 | static inline struct lp5521_led_pattern *lp5521_get_pattern | 
|  | 568 | (struct lp5521_chip *chip, u8 offset) | 
|  | 569 | { | 
|  | 570 | struct lp5521_led_pattern *ptn; | 
|  | 571 | ptn = chip->pdata->patterns + (offset - 1); | 
|  | 572 | return ptn; | 
|  | 573 | } | 
|  | 574 |  | 
|  | 575 | static void lp5521_run_led_pattern(int mode, struct lp5521_chip *chip) | 
|  | 576 | { | 
|  | 577 | struct lp5521_led_pattern *ptn; | 
|  | 578 | struct i2c_client *cl = chip->client; | 
|  | 579 | int num_patterns = chip->pdata->num_patterns; | 
|  | 580 |  | 
|  | 581 | if (mode > num_patterns || !(chip->pdata->patterns)) | 
|  | 582 | return; | 
|  | 583 |  | 
|  | 584 | if (mode == PATTERN_OFF) { | 
|  | 585 | lp5521_write(cl, LP5521_REG_ENABLE, LP5521_ENABLE_DEFAULT); | 
|  | 586 | usleep_range(1000, 2000); | 
|  | 587 | lp5521_write(cl, LP5521_REG_OP_MODE, LP5521_CMD_DIRECT); | 
|  | 588 | } else { | 
|  | 589 | ptn = lp5521_get_pattern(chip, mode); | 
|  | 590 | if (!ptn) | 
|  | 591 | return; | 
|  | 592 |  | 
|  | 593 | lp5521_write(cl, LP5521_REG_OP_MODE, LP5521_CMD_LOAD); | 
|  | 594 | usleep_range(1000, 2000); | 
|  | 595 |  | 
|  | 596 | lp5521_clear_program_memory(cl); | 
|  | 597 |  | 
|  | 598 | lp5521_write_program_memory(cl, LP5521_REG_R_PROG_MEM, | 
|  | 599 | ptn->r, ptn->size_r); | 
|  | 600 | lp5521_write_program_memory(cl, LP5521_REG_G_PROG_MEM, | 
|  | 601 | ptn->g, ptn->size_g); | 
|  | 602 | lp5521_write_program_memory(cl, LP5521_REG_B_PROG_MEM, | 
|  | 603 | ptn->b, ptn->size_b); | 
|  | 604 |  | 
|  | 605 | lp5521_write(cl, LP5521_REG_OP_MODE, LP5521_CMD_RUN); | 
|  | 606 | usleep_range(1000, 2000); | 
|  | 607 | lp5521_write(cl, LP5521_REG_ENABLE, LP5521_ENABLE_RUN_PROGRAM); | 
|  | 608 | } | 
|  | 609 | } | 
|  | 610 |  | 
|  | 611 | static ssize_t store_led_pattern(struct device *dev, | 
|  | 612 | struct device_attribute *attr, | 
|  | 613 | const char *buf, size_t len) | 
|  | 614 | { | 
|  | 615 | struct lp5521_chip *chip = i2c_get_clientdata(to_i2c_client(dev)); | 
|  | 616 | unsigned long val; | 
|  | 617 | int ret; | 
|  | 618 |  | 
|  | 619 | ret = strict_strtoul(buf, 16, &val); | 
|  | 620 | if (ret) | 
|  | 621 | return ret; | 
|  | 622 |  | 
|  | 623 | lp5521_run_led_pattern(val, chip); | 
|  | 624 |  | 
|  | 625 | return len; | 
|  | 626 | } | 
|  | 627 |  | 
|  | 628 | /* led class device attributes */ | 
|  | 629 | static DEVICE_ATTR(led_current, S_IRUGO | S_IWUSR, show_current, store_current); | 
|  | 630 | static DEVICE_ATTR(max_current, S_IRUGO , show_max_current, NULL); | 
|  | 631 |  | 
|  | 632 | static struct attribute *lp5521_led_attributes[] = { | 
|  | 633 | &dev_attr_led_current.attr, | 
|  | 634 | &dev_attr_max_current.attr, | 
|  | 635 | NULL, | 
|  | 636 | }; | 
|  | 637 |  | 
|  | 638 | static struct attribute_group lp5521_led_attribute_group = { | 
|  | 639 | .attrs = lp5521_led_attributes | 
|  | 640 | }; | 
|  | 641 |  | 
|  | 642 | /* device attributes */ | 
|  | 643 | static DEVICE_ATTR(engine1_mode, S_IRUGO | S_IWUSR, | 
|  | 644 | show_engine1_mode, store_engine1_mode); | 
|  | 645 | static DEVICE_ATTR(engine2_mode, S_IRUGO | S_IWUSR, | 
|  | 646 | show_engine2_mode, store_engine2_mode); | 
|  | 647 | static DEVICE_ATTR(engine3_mode, S_IRUGO | S_IWUSR, | 
|  | 648 | show_engine3_mode, store_engine3_mode); | 
|  | 649 | static DEVICE_ATTR(engine1_load, S_IWUSR, NULL, store_engine1_load); | 
|  | 650 | static DEVICE_ATTR(engine2_load, S_IWUSR, NULL, store_engine2_load); | 
|  | 651 | static DEVICE_ATTR(engine3_load, S_IWUSR, NULL, store_engine3_load); | 
|  | 652 | static DEVICE_ATTR(selftest, S_IRUGO, lp5521_selftest, NULL); | 
|  | 653 | static DEVICE_ATTR(led_pattern, S_IWUSR, NULL, store_led_pattern); | 
|  | 654 |  | 
|  | 655 | static struct attribute *lp5521_attributes[] = { | 
|  | 656 | &dev_attr_engine1_mode.attr, | 
|  | 657 | &dev_attr_engine2_mode.attr, | 
|  | 658 | &dev_attr_engine3_mode.attr, | 
|  | 659 | &dev_attr_selftest.attr, | 
|  | 660 | &dev_attr_engine1_load.attr, | 
|  | 661 | &dev_attr_engine2_load.attr, | 
|  | 662 | &dev_attr_engine3_load.attr, | 
|  | 663 | &dev_attr_led_pattern.attr, | 
|  | 664 | NULL | 
|  | 665 | }; | 
|  | 666 |  | 
|  | 667 | static const struct attribute_group lp5521_group = { | 
|  | 668 | .attrs = lp5521_attributes, | 
|  | 669 | }; | 
|  | 670 |  | 
|  | 671 | static int lp5521_register_sysfs(struct i2c_client *client) | 
|  | 672 | { | 
|  | 673 | struct device *dev = &client->dev; | 
|  | 674 | return sysfs_create_group(&dev->kobj, &lp5521_group); | 
|  | 675 | } | 
|  | 676 |  | 
|  | 677 | static void lp5521_unregister_sysfs(struct i2c_client *client) | 
|  | 678 | { | 
|  | 679 | struct lp5521_chip *chip = i2c_get_clientdata(client); | 
|  | 680 | struct device *dev = &client->dev; | 
|  | 681 | int i; | 
|  | 682 |  | 
|  | 683 | sysfs_remove_group(&dev->kobj, &lp5521_group); | 
|  | 684 |  | 
|  | 685 | for (i = 0; i < chip->num_leds; i++) | 
|  | 686 | sysfs_remove_group(&chip->leds[i].cdev.dev->kobj, | 
|  | 687 | &lp5521_led_attribute_group); | 
|  | 688 | } | 
|  | 689 |  | 
|  | 690 | static int __devinit lp5521_init_led(struct lp5521_led *led, | 
|  | 691 | struct i2c_client *client, | 
|  | 692 | int chan, struct lp5521_platform_data *pdata) | 
|  | 693 | { | 
|  | 694 | struct device *dev = &client->dev; | 
|  | 695 | char name[32]; | 
|  | 696 | int res; | 
|  | 697 |  | 
|  | 698 | if (chan >= LP5521_MAX_LEDS) | 
|  | 699 | return -EINVAL; | 
|  | 700 |  | 
|  | 701 | if (pdata->led_config[chan].led_current == 0) | 
|  | 702 | return 0; | 
|  | 703 |  | 
|  | 704 | led->led_current = pdata->led_config[chan].led_current; | 
|  | 705 | led->max_current = pdata->led_config[chan].max_current; | 
|  | 706 | led->chan_nr = pdata->led_config[chan].chan_nr; | 
|  | 707 |  | 
|  | 708 | if (led->chan_nr >= LP5521_MAX_LEDS) { | 
|  | 709 | dev_err(dev, "Use channel numbers between 0 and %d\n", | 
|  | 710 | LP5521_MAX_LEDS - 1); | 
|  | 711 | return -EINVAL; | 
|  | 712 | } | 
|  | 713 |  | 
|  | 714 | led->cdev.brightness_set = lp5521_set_brightness; | 
|  | 715 | if (pdata->led_config[chan].name) { | 
|  | 716 | led->cdev.name = pdata->led_config[chan].name; | 
|  | 717 | } else { | 
|  | 718 | snprintf(name, sizeof(name), "%s:channel%d", | 
|  | 719 | pdata->label ?: client->name, chan); | 
|  | 720 | led->cdev.name = name; | 
|  | 721 | } | 
|  | 722 |  | 
|  | 723 | res = led_classdev_register(dev, &led->cdev); | 
|  | 724 | if (res < 0) { | 
|  | 725 | dev_err(dev, "couldn't register led on channel %d\n", chan); | 
|  | 726 | return res; | 
|  | 727 | } | 
|  | 728 |  | 
|  | 729 | res = sysfs_create_group(&led->cdev.dev->kobj, | 
|  | 730 | &lp5521_led_attribute_group); | 
|  | 731 | if (res < 0) { | 
|  | 732 | dev_err(dev, "couldn't register current attribute\n"); | 
|  | 733 | led_classdev_unregister(&led->cdev); | 
|  | 734 | return res; | 
|  | 735 | } | 
|  | 736 | return 0; | 
|  | 737 | } | 
|  | 738 |  | 
|  | 739 | static int __devinit lp5521_probe(struct i2c_client *client, | 
|  | 740 | const struct i2c_device_id *id) | 
|  | 741 | { | 
|  | 742 | struct lp5521_chip		*chip; | 
|  | 743 | struct lp5521_platform_data	*pdata; | 
|  | 744 | int ret, i, led; | 
|  | 745 | u8 buf; | 
|  | 746 |  | 
|  | 747 | chip = kzalloc(sizeof(*chip), GFP_KERNEL); | 
|  | 748 | if (!chip) | 
|  | 749 | return -ENOMEM; | 
|  | 750 |  | 
|  | 751 | i2c_set_clientdata(client, chip); | 
|  | 752 | chip->client = client; | 
|  | 753 |  | 
|  | 754 | pdata = client->dev.platform_data; | 
|  | 755 |  | 
|  | 756 | if (!pdata) { | 
|  | 757 | dev_err(&client->dev, "no platform data\n"); | 
|  | 758 | ret = -EINVAL; | 
|  | 759 | goto fail1; | 
|  | 760 | } | 
|  | 761 |  | 
|  | 762 | mutex_init(&chip->lock); | 
|  | 763 |  | 
|  | 764 | chip->pdata   = pdata; | 
|  | 765 |  | 
|  | 766 | if (pdata->setup_resources) { | 
|  | 767 | ret = pdata->setup_resources(); | 
|  | 768 | if (ret < 0) | 
|  | 769 | goto fail1; | 
|  | 770 | } | 
|  | 771 |  | 
|  | 772 | if (pdata->enable) { | 
|  | 773 | pdata->enable(0); | 
|  | 774 | usleep_range(1000, 2000); /* Keep enable down at least 1ms */ | 
|  | 775 | pdata->enable(1); | 
|  | 776 | usleep_range(1000, 2000); /* 500us abs min. */ | 
|  | 777 | } | 
|  | 778 |  | 
|  | 779 | lp5521_write(client, LP5521_REG_RESET, 0xff); | 
|  | 780 | usleep_range(10000, 20000); /* | 
|  | 781 | * Exact value is not available. 10 - 20ms | 
|  | 782 | * appears to be enough for reset. | 
|  | 783 | */ | 
|  | 784 |  | 
|  | 785 | /* | 
|  | 786 | * Make sure that the chip is reset by reading back the r channel | 
|  | 787 | * current reg. This is dummy read is required on some platforms - | 
|  | 788 | * otherwise further access to the R G B channels in the | 
|  | 789 | * LP5521_REG_ENABLE register will not have any effect - strange! | 
|  | 790 | */ | 
|  | 791 | ret = lp5521_read(client, LP5521_REG_R_CURRENT, &buf); | 
|  | 792 | if (ret || buf != LP5521_REG_R_CURR_DEFAULT) { | 
|  | 793 | dev_err(&client->dev, "error in resetting chip\n"); | 
|  | 794 | goto fail2; | 
|  | 795 | } | 
|  | 796 | usleep_range(10000, 20000); | 
|  | 797 |  | 
|  | 798 | ret = lp5521_detect(client); | 
|  | 799 |  | 
|  | 800 | if (ret) { | 
|  | 801 | dev_err(&client->dev, "Chip not found\n"); | 
|  | 802 | goto fail2; | 
|  | 803 | } | 
|  | 804 |  | 
|  | 805 | dev_info(&client->dev, "%s programmable led chip found\n", id->name); | 
|  | 806 |  | 
|  | 807 | ret = lp5521_configure(client); | 
|  | 808 | if (ret < 0) { | 
|  | 809 | dev_err(&client->dev, "error configuring chip\n"); | 
|  | 810 | goto fail2; | 
|  | 811 | } | 
|  | 812 |  | 
|  | 813 | /* Initialize leds */ | 
|  | 814 | chip->num_channels = pdata->num_channels; | 
|  | 815 | chip->num_leds = 0; | 
|  | 816 | led = 0; | 
|  | 817 | for (i = 0; i < pdata->num_channels; i++) { | 
|  | 818 | /* Do not initialize channels that are not connected */ | 
|  | 819 | if (pdata->led_config[i].led_current == 0) | 
|  | 820 | continue; | 
|  | 821 |  | 
|  | 822 | ret = lp5521_init_led(&chip->leds[led], client, i, pdata); | 
|  | 823 | if (ret) { | 
|  | 824 | dev_err(&client->dev, "error initializing leds\n"); | 
|  | 825 | goto fail3; | 
|  | 826 | } | 
|  | 827 | chip->num_leds++; | 
|  | 828 |  | 
|  | 829 | chip->leds[led].id = led; | 
|  | 830 | /* Set initial LED current */ | 
|  | 831 | lp5521_set_led_current(chip, led, | 
|  | 832 | chip->leds[led].led_current); | 
|  | 833 |  | 
|  | 834 | INIT_WORK(&(chip->leds[led].brightness_work), | 
|  | 835 | lp5521_led_brightness_work); | 
|  | 836 |  | 
|  | 837 | led++; | 
|  | 838 | } | 
|  | 839 |  | 
|  | 840 | ret = lp5521_register_sysfs(client); | 
|  | 841 | if (ret) { | 
|  | 842 | dev_err(&client->dev, "registering sysfs failed\n"); | 
|  | 843 | goto fail3; | 
|  | 844 | } | 
|  | 845 | return ret; | 
|  | 846 | fail3: | 
|  | 847 | for (i = 0; i < chip->num_leds; i++) { | 
|  | 848 | led_classdev_unregister(&chip->leds[i].cdev); | 
|  | 849 | cancel_work_sync(&chip->leds[i].brightness_work); | 
|  | 850 | } | 
|  | 851 | fail2: | 
|  | 852 | if (pdata->enable) | 
|  | 853 | pdata->enable(0); | 
|  | 854 | if (pdata->release_resources) | 
|  | 855 | pdata->release_resources(); | 
|  | 856 | fail1: | 
|  | 857 | kfree(chip); | 
|  | 858 | return ret; | 
|  | 859 | } | 
|  | 860 |  | 
|  | 861 | static int __devexit lp5521_remove(struct i2c_client *client) | 
|  | 862 | { | 
|  | 863 | struct lp5521_chip *chip = i2c_get_clientdata(client); | 
|  | 864 | int i; | 
|  | 865 |  | 
|  | 866 | lp5521_run_led_pattern(PATTERN_OFF, chip); | 
|  | 867 | lp5521_unregister_sysfs(client); | 
|  | 868 |  | 
|  | 869 | for (i = 0; i < chip->num_leds; i++) { | 
|  | 870 | led_classdev_unregister(&chip->leds[i].cdev); | 
|  | 871 | cancel_work_sync(&chip->leds[i].brightness_work); | 
|  | 872 | } | 
|  | 873 |  | 
|  | 874 | if (chip->pdata->enable) | 
|  | 875 | chip->pdata->enable(0); | 
|  | 876 | if (chip->pdata->release_resources) | 
|  | 877 | chip->pdata->release_resources(); | 
|  | 878 | kfree(chip); | 
|  | 879 | return 0; | 
|  | 880 | } | 
|  | 881 |  | 
|  | 882 | static const struct i2c_device_id lp5521_id[] = { | 
|  | 883 | { "lp5521", 0 }, /* Three channel chip */ | 
|  | 884 | { } | 
|  | 885 | }; | 
|  | 886 | MODULE_DEVICE_TABLE(i2c, lp5521_id); | 
|  | 887 |  | 
|  | 888 | static struct i2c_driver lp5521_driver = { | 
|  | 889 | .driver = { | 
|  | 890 | .name	= "lp5521", | 
|  | 891 | }, | 
|  | 892 | .probe		= lp5521_probe, | 
|  | 893 | .remove		= __devexit_p(lp5521_remove), | 
|  | 894 | .id_table	= lp5521_id, | 
|  | 895 | }; | 
|  | 896 |  | 
|  | 897 | module_i2c_driver(lp5521_driver); | 
|  | 898 |  | 
|  | 899 | MODULE_AUTHOR("Mathias Nyman, Yuri Zaporozhets, Samu Onkalo"); | 
|  | 900 | MODULE_DESCRIPTION("LP5521 LED engine"); | 
|  | 901 | MODULE_LICENSE("GPL v2"); |