lh | 9ed821d | 2023-04-07 01:36:19 -0700 | [diff] [blame] | 1 | /* vi: set sw=4 ts=4: */ |
| 2 | /* |
| 3 | * Copyright: Copyright (C) 2001, Hewlett-Packard Company |
| 4 | * Author: Christopher Hoover <ch@hpl.hp.com> |
| 5 | * Description: xmodem functionality for uploading of kernels |
| 6 | * and the like |
| 7 | * Created at: Thu Dec 20 01:58:08 PST 2001 |
| 8 | * |
| 9 | * xmodem functionality for uploading of kernels and the like |
| 10 | * |
| 11 | * Copyright (C) 2001 Hewlett-Packard Laboratories |
| 12 | * |
| 13 | * Licensed under GPLv2 or later, see file LICENSE in this source tree. |
| 14 | * |
| 15 | * This was originally written for blob and then adapted for busybox. |
| 16 | */ |
| 17 | |
| 18 | //usage:#define rx_trivial_usage |
| 19 | //usage: "FILE" |
| 20 | //usage:#define rx_full_usage "\n\n" |
| 21 | //usage: "Receive a file using the xmodem protocol" |
| 22 | //usage: |
| 23 | //usage:#define rx_example_usage |
| 24 | //usage: "$ rx /tmp/foo\n" |
| 25 | |
| 26 | #include "libbb.h" |
| 27 | |
| 28 | #define SOH 0x01 |
| 29 | #define STX 0x02 |
| 30 | #define EOT 0x04 |
| 31 | #define ACK 0x06 |
| 32 | #define NAK 0x15 |
| 33 | #define BS 0x08 |
| 34 | #define PAD 0x1A |
| 35 | |
| 36 | /* |
| 37 | Cf: |
| 38 | http://www.textfiles.com/apple/xmodem |
| 39 | http://www.phys.washington.edu/~belonis/xmodem/docxmodem.txt |
| 40 | http://www.phys.washington.edu/~belonis/xmodem/docymodem.txt |
| 41 | http://www.phys.washington.edu/~belonis/xmodem/modmprot.col |
| 42 | */ |
| 43 | |
| 44 | #define TIMEOUT 1 |
| 45 | #define TIMEOUT_LONG 10 |
| 46 | #define MAXERRORS 10 |
| 47 | |
| 48 | #define read_fd STDIN_FILENO |
| 49 | #define write_fd STDOUT_FILENO |
| 50 | |
| 51 | static int read_byte(unsigned timeout) |
| 52 | { |
| 53 | unsigned char buf; |
| 54 | int n; |
| 55 | |
| 56 | alarm(timeout); |
| 57 | /* NOT safe_read! We want ALRM to interrupt us */ |
| 58 | n = read(read_fd, &buf, 1); |
| 59 | alarm(0); |
| 60 | if (n == 1) |
| 61 | return buf; |
| 62 | return -1; |
| 63 | } |
| 64 | |
| 65 | static int receive(/*int read_fd, */int file_fd) |
| 66 | { |
| 67 | unsigned char blockBuf[1024]; |
| 68 | unsigned blockLength = 0; |
| 69 | unsigned errors = 0; |
| 70 | unsigned wantBlockNo = 1; |
| 71 | unsigned length = 0; |
| 72 | int do_crc = 1; |
| 73 | char reply_char; |
| 74 | unsigned timeout = TIMEOUT_LONG; |
| 75 | |
| 76 | /* Flush pending input */ |
| 77 | tcflush(read_fd, TCIFLUSH); |
| 78 | |
| 79 | /* Ask for CRC; if we get errors, we will go with checksum */ |
| 80 | reply_char = 'C'; |
| 81 | full_write(write_fd, &reply_char, 1); |
| 82 | |
| 83 | for (;;) { |
| 84 | int blockBegin; |
| 85 | int blockNo, blockNoOnesCompl; |
| 86 | int cksum_or_crc; |
| 87 | int expected; |
| 88 | int i, j; |
| 89 | |
| 90 | blockBegin = read_byte(timeout); |
| 91 | if (blockBegin < 0) |
| 92 | goto timeout; |
| 93 | |
| 94 | /* If last block, remove padding */ |
| 95 | if (blockBegin == EOT) { |
| 96 | /* Data blocks can be padded with ^Z characters */ |
| 97 | /* This code tries to detect and remove them */ |
| 98 | if (blockLength >= 3 |
| 99 | && blockBuf[blockLength - 1] == PAD |
| 100 | && blockBuf[blockLength - 2] == PAD |
| 101 | && blockBuf[blockLength - 3] == PAD |
| 102 | ) { |
| 103 | while (blockLength |
| 104 | && blockBuf[blockLength - 1] == PAD |
| 105 | ) { |
| 106 | blockLength--; |
| 107 | } |
| 108 | } |
| 109 | } |
| 110 | /* Write previously received block */ |
| 111 | errno = 0; |
| 112 | if (full_write(file_fd, blockBuf, blockLength) != blockLength) { |
| 113 | bb_perror_msg(bb_msg_write_error); |
| 114 | goto fatal; |
| 115 | } |
| 116 | |
| 117 | timeout = TIMEOUT; |
| 118 | reply_char = NAK; |
| 119 | |
| 120 | switch (blockBegin) { |
| 121 | case SOH: |
| 122 | case STX: |
| 123 | break; |
| 124 | case EOT: |
| 125 | reply_char = ACK; |
| 126 | full_write(write_fd, &reply_char, 1); |
| 127 | return length; |
| 128 | default: |
| 129 | goto error; |
| 130 | } |
| 131 | |
| 132 | /* Block no */ |
| 133 | blockNo = read_byte(TIMEOUT); |
| 134 | if (blockNo < 0) |
| 135 | goto timeout; |
| 136 | |
| 137 | /* Block no, in one's complement form */ |
| 138 | blockNoOnesCompl = read_byte(TIMEOUT); |
| 139 | if (blockNoOnesCompl < 0) |
| 140 | goto timeout; |
| 141 | |
| 142 | if (blockNo != (255 - blockNoOnesCompl)) { |
| 143 | bb_error_msg("bad block ones compl"); |
| 144 | goto error; |
| 145 | } |
| 146 | |
| 147 | blockLength = (blockBegin == SOH) ? 128 : 1024; |
| 148 | |
| 149 | for (i = 0; i < blockLength; i++) { |
| 150 | int cc = read_byte(TIMEOUT); |
| 151 | if (cc < 0) |
| 152 | goto timeout; |
| 153 | blockBuf[i] = cc; |
| 154 | } |
| 155 | |
| 156 | cksum_or_crc = read_byte(TIMEOUT); |
| 157 | if (cksum_or_crc < 0) |
| 158 | goto timeout; |
| 159 | if (do_crc) { |
| 160 | cksum_or_crc = (cksum_or_crc << 8) | read_byte(TIMEOUT); |
| 161 | if (cksum_or_crc < 0) |
| 162 | goto timeout; |
| 163 | } |
| 164 | |
| 165 | if (blockNo == ((wantBlockNo - 1) & 0xff)) { |
| 166 | /* a repeat of the last block is ok, just ignore it. */ |
| 167 | /* this also ignores the initial block 0 which is */ |
| 168 | /* meta data. */ |
| 169 | blockLength = 0; |
| 170 | goto next; |
| 171 | } |
| 172 | if (blockNo != (wantBlockNo & 0xff)) { |
| 173 | bb_error_msg("unexpected block no, 0x%08x, expecting 0x%08x", blockNo, wantBlockNo); |
| 174 | goto error; |
| 175 | } |
| 176 | |
| 177 | expected = 0; |
| 178 | if (do_crc) { |
| 179 | for (i = 0; i < blockLength; i++) { |
| 180 | expected = expected ^ blockBuf[i] << 8; |
| 181 | for (j = 0; j < 8; j++) { |
| 182 | if (expected & 0x8000) |
| 183 | expected = (expected << 1) ^ 0x1021; |
| 184 | else |
| 185 | expected = (expected << 1); |
| 186 | } |
| 187 | } |
| 188 | expected &= 0xffff; |
| 189 | } else { |
| 190 | for (i = 0; i < blockLength; i++) |
| 191 | expected += blockBuf[i]; |
| 192 | expected &= 0xff; |
| 193 | } |
| 194 | if (cksum_or_crc != expected) { |
| 195 | bb_error_msg(do_crc ? "crc error, expected 0x%04x, got 0x%04x" |
| 196 | : "checksum error, expected 0x%02x, got 0x%02x", |
| 197 | expected, cksum_or_crc); |
| 198 | goto error; |
| 199 | } |
| 200 | |
| 201 | wantBlockNo++; |
| 202 | length += blockLength; |
| 203 | next: |
| 204 | errors = 0; |
| 205 | reply_char = ACK; |
| 206 | full_write(write_fd, &reply_char, 1); |
| 207 | continue; |
| 208 | error: |
| 209 | timeout: |
| 210 | blockLength = 0; |
| 211 | errors++; |
| 212 | if (errors == MAXERRORS) { |
| 213 | /* Abort */ |
| 214 | |
| 215 | /* If were asking for crc, try again w/o crc */ |
| 216 | if (reply_char == 'C') { |
| 217 | reply_char = NAK; |
| 218 | errors = 0; |
| 219 | do_crc = 0; |
| 220 | goto timeout; |
| 221 | } |
| 222 | bb_error_msg("too many errors; giving up"); |
| 223 | fatal: |
| 224 | /* 5 CAN followed by 5 BS. Don't try too hard... */ |
| 225 | safe_write(write_fd, "\030\030\030\030\030\010\010\010\010\010", 10); |
| 226 | return -1; |
| 227 | } |
| 228 | |
| 229 | /* Flush pending input */ |
| 230 | tcflush(read_fd, TCIFLUSH); |
| 231 | |
| 232 | full_write(write_fd, &reply_char, 1); |
| 233 | } /* for (;;) */ |
| 234 | } |
| 235 | |
| 236 | static void sigalrm_handler(int UNUSED_PARAM signum) |
| 237 | { |
| 238 | } |
| 239 | |
| 240 | int rx_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE; |
| 241 | int rx_main(int argc UNUSED_PARAM, char **argv) |
| 242 | { |
| 243 | struct termios tty, orig_tty; |
| 244 | int termios_err; |
| 245 | int file_fd; |
| 246 | int n; |
| 247 | |
| 248 | /* Disabled by vda: |
| 249 | * why we can't receive from stdin? Why we *require* |
| 250 | * controlling tty?? */ |
| 251 | /*read_fd = xopen(CURRENT_TTY, O_RDWR);*/ |
| 252 | file_fd = xopen(single_argv(argv), O_RDWR|O_CREAT|O_TRUNC); |
| 253 | |
| 254 | termios_err = tcgetattr(read_fd, &tty); |
| 255 | if (termios_err == 0) { |
| 256 | orig_tty = tty; |
| 257 | cfmakeraw(&tty); |
| 258 | tcsetattr(read_fd, TCSAFLUSH, &tty); |
| 259 | } |
| 260 | |
| 261 | /* No SA_RESTART: we want ALRM to interrupt read() */ |
| 262 | signal_no_SA_RESTART_empty_mask(SIGALRM, sigalrm_handler); |
| 263 | |
| 264 | n = receive(file_fd); |
| 265 | |
| 266 | if (termios_err == 0) |
| 267 | tcsetattr(read_fd, TCSAFLUSH, &orig_tty); |
| 268 | if (ENABLE_FEATURE_CLEAN_UP) |
| 269 | close(file_fd); |
| 270 | fflush_stdout_and_exit(n >= 0); |
| 271 | } |