| # |
| # Copyright (C) 2006-2015 OpenWrt.org |
| # |
| # This is free software, licensed under the GNU General Public License v2. |
| # See /LICENSE for more information. |
| # |
| |
| OTHER_MENU:=Other modules |
| |
| WATCHDOG_DIR:=watchdog |
| |
| |
| define KernelPackage/6lowpan |
| SUBMENU:=$(OTHER_MENU) |
| TITLE:=6LoWPAN shared code |
| KCONFIG:= \ |
| CONFIG_6LOWPAN \ |
| CONFIG_6LOWPAN_NHC=n |
| FILES:=$(LINUX_DIR)/net/6lowpan/6lowpan.ko |
| AUTOLOAD:=$(call AutoProbe,6lowpan) |
| endef |
| |
| define KernelPackage/6lowpan/description |
| Shared 6lowpan code for IEEE 802.15.4 and Bluetooth. |
| endef |
| |
| $(eval $(call KernelPackage,6lowpan)) |
| |
| |
| define KernelPackage/bluetooth |
| SUBMENU:=$(OTHER_MENU) |
| TITLE:=Bluetooth support |
| DEPENDS:=@USB_SUPPORT +kmod-crypto-cmac +kmod-crypto-ecb \ |
| +kmod-crypto-ecdh +kmod-crypto-hash +kmod-hid +kmod-lib-crc16 \ |
| +kmod-regmap-core +kmod-serdev +kmod-usb-core |
| KCONFIG:= \ |
| CONFIG_BT \ |
| CONFIG_BT_BREDR=y \ |
| CONFIG_BT_DEBUGFS=n \ |
| CONFIG_BT_LE=y \ |
| CONFIG_BT_RFCOMM \ |
| CONFIG_BT_BNEP \ |
| CONFIG_BT_HCIBTUSB \ |
| CONFIG_BT_HCIBTUSB_BCM=y \ |
| CONFIG_BT_HCIBTUSB_MTK=y \ |
| CONFIG_BT_HCIBTUSB_RTL=y \ |
| CONFIG_BT_HCIUART \ |
| CONFIG_BT_HCIUART_BCM=y \ |
| CONFIG_BT_HCIUART_INTEL=n \ |
| CONFIG_BT_HCIUART_H4 \ |
| CONFIG_BT_HCIUART_NOKIA=n \ |
| CONFIG_BT_HCIUART_QCA=y \ |
| CONFIG_BT_HCIUART_SERDEV=y \ |
| CONFIG_BT_HIDP |
| $(call AddDepends/rfkill) |
| FILES:= \ |
| $(LINUX_DIR)/net/bluetooth/bluetooth.ko \ |
| $(LINUX_DIR)/net/bluetooth/rfcomm/rfcomm.ko \ |
| $(LINUX_DIR)/net/bluetooth/bnep/bnep.ko \ |
| $(LINUX_DIR)/net/bluetooth/hidp/hidp.ko \ |
| $(LINUX_DIR)/drivers/bluetooth/hci_uart.ko \ |
| $(LINUX_DIR)/drivers/bluetooth/btusb.ko \ |
| $(LINUX_DIR)/drivers/bluetooth/btbcm.ko \ |
| $(LINUX_DIR)/drivers/bluetooth/btqca.ko \ |
| $(LINUX_DIR)/drivers/bluetooth/btrtl.ko \ |
| $(LINUX_DIR)/drivers/bluetooth/btintel.ko \ |
| $(LINUX_DIR)/drivers/bluetooth/btmtk.ko@ge5.17 |
| AUTOLOAD:=$(call AutoProbe,bluetooth rfcomm bnep hidp hci_uart btusb) |
| endef |
| |
| define KernelPackage/bluetooth/description |
| Kernel support for Bluetooth devices |
| endef |
| |
| $(eval $(call KernelPackage,bluetooth)) |
| |
| define KernelPackage/ath3k |
| SUBMENU:=$(OTHER_MENU) |
| TITLE:=ATH3K Kernel Module support |
| DEPENDS:=+kmod-bluetooth +ar3k-firmware |
| KCONFIG:= \ |
| CONFIG_BT_ATH3K \ |
| CONFIG_BT_HCIUART_ATH3K=y |
| FILES:= \ |
| $(LINUX_DIR)/drivers/bluetooth/ath3k.ko |
| AUTOLOAD:=$(call AutoProbe,ath3k) |
| endef |
| |
| define KernelPackage/ath3k/description |
| Kernel support for ATH3K Module |
| endef |
| |
| $(eval $(call KernelPackage,ath3k)) |
| |
| |
| define KernelPackage/bluetooth-6lowpan |
| SUBMENU:=$(OTHER_MENU) |
| TITLE:=Bluetooth 6LoWPAN support |
| DEPENDS:=+kmod-6lowpan +kmod-bluetooth |
| KCONFIG:=CONFIG_BT_6LOWPAN |
| FILES:=$(LINUX_DIR)/net/bluetooth/bluetooth_6lowpan.ko |
| AUTOLOAD:=$(call AutoProbe,bluetooth_6lowpan) |
| endef |
| |
| define KernelPackage/bluetooth-6lowpan/description |
| Kernel support for 6LoWPAN over Bluetooth Low Energy devices |
| endef |
| |
| $(eval $(call KernelPackage,bluetooth-6lowpan)) |
| |
| |
| define KernelPackage/btmrvl |
| SUBMENU:=$(OTHER_MENU) |
| TITLE:=Marvell Bluetooth Kernel Module support |
| DEPENDS:=+kmod-mmc +kmod-bluetooth +mwifiex-sdio-firmware |
| KCONFIG:= \ |
| CONFIG_BT_MRVL \ |
| CONFIG_BT_MRVL_SDIO |
| FILES:= \ |
| $(LINUX_DIR)/drivers/bluetooth/btmrvl.ko \ |
| $(LINUX_DIR)/drivers/bluetooth/btmrvl_sdio.ko |
| AUTOLOAD:=$(call AutoProbe,btmrvl btmrvl_sdio) |
| endef |
| |
| define KernelPackage/btmrvl/description |
| Kernel support for Marvell SDIO Bluetooth Module |
| endef |
| |
| $(eval $(call KernelPackage,btmrvl)) |
| |
| |
| define KernelPackage/btsdio |
| SUBMENU:=$(OTHER_MENU) |
| TITLE:=Bluetooth HCI SDIO driver |
| DEPENDS:=+kmod-bluetooth +kmod-mmc |
| KCONFIG:= \ |
| CONFIG_BT_HCIBTSDIO |
| FILES:= \ |
| $(LINUX_DIR)/drivers/bluetooth/btsdio.ko |
| AUTOLOAD:=$(call AutoProbe,btsdio) |
| endef |
| |
| define KernelPackage/btsdio/description |
| Kernel support for Bluetooth device with SDIO interface |
| endef |
| |
| $(eval $(call KernelPackage,btsdio)) |
| |
| |
| define KernelPackage/dma-buf |
| SUBMENU:=$(OTHER_MENU) |
| TITLE:=DMA shared buffer support |
| HIDDEN:=1 |
| KCONFIG:=CONFIG_DMA_SHARED_BUFFER |
| ifeq ($(strip $(CONFIG_EXTERNAL_KERNEL_TREE)),"") |
| ifeq ($(strip $(CONFIG_KERNEL_GIT_CLONE_URI)),"") |
| FILES:=$(LINUX_DIR)/drivers/dma-buf/dma-shared-buffer.ko |
| endif |
| endif |
| AUTOLOAD:=$(call AutoLoad,20,dma-shared-buffer) |
| endef |
| $(eval $(call KernelPackage,dma-buf)) |
| |
| |
| define KernelPackage/eeprom-93cx6 |
| SUBMENU:=$(OTHER_MENU) |
| TITLE:=EEPROM 93CX6 support |
| KCONFIG:=CONFIG_EEPROM_93CX6 |
| FILES:=$(LINUX_DIR)/drivers/misc/eeprom/eeprom_93cx6.ko |
| AUTOLOAD:=$(call AutoLoad,20,eeprom_93cx6) |
| endef |
| |
| define KernelPackage/eeprom-93cx6/description |
| Kernel module for EEPROM 93CX6 support |
| endef |
| |
| $(eval $(call KernelPackage,eeprom-93cx6)) |
| |
| |
| define KernelPackage/eeprom-at24 |
| SUBMENU:=$(OTHER_MENU) |
| TITLE:=EEPROM AT24 support |
| KCONFIG:=CONFIG_EEPROM_AT24 |
| DEPENDS:=+kmod-i2c-core +kmod-regmap-i2c |
| FILES:=$(LINUX_DIR)/drivers/misc/eeprom/at24.ko |
| AUTOLOAD:=$(call AutoProbe,at24) |
| endef |
| |
| define KernelPackage/eeprom-at24/description |
| Kernel module for most I2C EEPROMs |
| endef |
| |
| $(eval $(call KernelPackage,eeprom-at24)) |
| |
| |
| define KernelPackage/eeprom-at25 |
| SUBMENU:=$(OTHER_MENU) |
| TITLE:=EEPROM AT25 support |
| KCONFIG:=CONFIG_EEPROM_AT25 |
| FILES:=$(LINUX_DIR)/drivers/misc/eeprom/at25.ko |
| AUTOLOAD:=$(call AutoProbe,at25) |
| endef |
| |
| define KernelPackage/eeprom-at25/description |
| Kernel module for most SPI EEPROMs |
| endef |
| |
| $(eval $(call KernelPackage,eeprom-at25)) |
| |
| |
| define KernelPackage/google-firmware |
| SUBMENU:=$(OTHER_MENU) |
| TITLE:=Google firmware drivers (Coreboot, VPD, Memconsole) |
| KCONFIG:= \ |
| CONFIG_GOOGLE_FIRMWARE=y \ |
| CONFIG_GOOGLE_COREBOOT_TABLE \ |
| CONFIG_GOOGLE_MEMCONSOLE \ |
| CONFIG_GOOGLE_MEMCONSOLE_COREBOOT \ |
| CONFIG_GOOGLE_VPD |
| FILES:= \ |
| $(LINUX_DIR)/drivers/firmware/google/coreboot_table.ko \ |
| $(LINUX_DIR)/drivers/firmware/google/memconsole.ko \ |
| $(LINUX_DIR)/drivers/firmware/google/memconsole-coreboot.ko \ |
| $(LINUX_DIR)/drivers/firmware/google/vpd-sysfs.ko |
| AUTOLOAD:=$(call AutoProbe,coreboot_table memconsole-coreboot vpd-sysfs) |
| endef |
| |
| define KernelPackage/google-firmware/description |
| Kernel modules for Google firmware drivers. Useful for examining firmware and |
| boot details on devices using a Google bootloader based on Coreboot. Provides |
| files like /sys/firmware/log and /sys/firmware/vpd. |
| endef |
| |
| $(eval $(call KernelPackage,google-firmware)) |
| |
| |
| define KernelPackage/lkdtm |
| SUBMENU:=$(OTHER_MENU) |
| TITLE:=Linux Kernel Dump Test Tool Module |
| KCONFIG:=CONFIG_LKDTM |
| FILES:=$(LINUX_DIR)/drivers/misc/lkdtm/lkdtm.ko |
| AUTOLOAD:=$(call AutoProbe,lkdtm) |
| endef |
| |
| define KernelPackage/lkdtm/description |
| This module enables testing of the different dumping mechanisms by inducing |
| system failures at predefined crash points. |
| endef |
| |
| $(eval $(call KernelPackage,lkdtm)) |
| |
| |
| define KernelPackage/pinctrl-mcp23s08 |
| SUBMENU:=$(OTHER_MENU) |
| TITLE:=Microchip MCP23xxx I/O expander |
| HIDDEN:=1 |
| DEPENDS:=@GPIO_SUPPORT +kmod-regmap-core |
| KCONFIG:=CONFIG_PINCTRL_MCP23S08 |
| FILES:=$(LINUX_DIR)/drivers/pinctrl/pinctrl-mcp23s08.ko |
| AUTOLOAD:=$(call AutoLoad,40,pinctrl-mcp23s08) |
| endef |
| |
| define KernelPackage/pinctrl-mcp23s08/description |
| Kernel module for Microchip MCP23xxx I/O expander |
| endef |
| |
| $(eval $(call KernelPackage,pinctrl-mcp23s08)) |
| |
| |
| define KernelPackage/pinctrl-mcp23s08-i2c |
| SUBMENU:=$(OTHER_MENU) |
| TITLE:=Microchip MCP23xxx I/O expander (I2C) |
| DEPENDS:=@GPIO_SUPPORT \ |
| +kmod-pinctrl-mcp23s08 \ |
| +kmod-i2c-core \ |
| +kmod-regmap-i2c |
| KCONFIG:=CONFIG_PINCTRL_MCP23S08_I2C |
| FILES:=$(LINUX_DIR)/drivers/pinctrl/pinctrl-mcp23s08_i2c.ko |
| AUTOLOAD:=$(call AutoLoad,40,pinctrl-mcp23s08-i2c) |
| endef |
| |
| define KernelPackage/pinctrl-mcp23s08-i2c/description |
| Kernel module for Microchip MCP23xxx I/O expander via I2C |
| endef |
| |
| $(eval $(call KernelPackage,pinctrl-mcp23s08-i2c)) |
| |
| |
| define KernelPackage/pinctrl-mcp23s08-spi |
| SUBMENU:=$(OTHER_MENU) |
| TITLE:=Microchip MCP23xxx I/O expander (SPI) |
| DEPENDS:=@GPIO_SUPPORT +kmod-pinctrl-mcp23s08 |
| KCONFIG:=CONFIG_PINCTRL_MCP23S08_SPI |
| FILES:=$(LINUX_DIR)/drivers/pinctrl/pinctrl-mcp23s08_spi.ko |
| AUTOLOAD:=$(call AutoLoad,40,pinctrl-mcp23s08-spi) |
| endef |
| |
| define KernelPackage/pinctrl-mcp23s08-spi/description |
| Kernel module for Microchip MCP23xxx I/O expander via SPI |
| endef |
| |
| $(eval $(call KernelPackage,pinctrl-mcp23s08-spi)) |
| |
| |
| define KernelPackage/ppdev |
| SUBMENU:=$(OTHER_MENU) |
| TITLE:=Parallel port support |
| KCONFIG:= \ |
| CONFIG_PARPORT \ |
| CONFIG_PPDEV |
| FILES:= \ |
| $(LINUX_DIR)/drivers/parport/parport.ko \ |
| $(LINUX_DIR)/drivers/char/ppdev.ko |
| AUTOLOAD:=$(call AutoLoad,50,parport ppdev) |
| endef |
| |
| $(eval $(call KernelPackage,ppdev)) |
| |
| |
| define KernelPackage/parport-pc |
| SUBMENU:=$(OTHER_MENU) |
| TITLE:=Parallel port interface (PC-style) support |
| DEPENDS:=+kmod-ppdev |
| KCONFIG:= \ |
| CONFIG_KS0108=n \ |
| CONFIG_PARPORT_PC \ |
| CONFIG_PARPORT_1284=y \ |
| CONFIG_PARPORT_PC_FIFO=y \ |
| CONFIG_PARPORT_PC_PCMCIA=n \ |
| CONFIG_PARPORT_PC_SUPERIO=y \ |
| CONFIG_PARPORT_SERIAL=n \ |
| CONFIG_PARIDE=n \ |
| CONFIG_SCSI_IMM=n \ |
| CONFIG_SCSI_PPA=n |
| FILES:= \ |
| $(LINUX_DIR)/drivers/parport/parport_pc.ko |
| AUTOLOAD:=$(call AutoLoad,51,parport_pc) |
| endef |
| |
| $(eval $(call KernelPackage,parport-pc)) |
| |
| |
| define KernelPackage/lp |
| SUBMENU:=$(OTHER_MENU) |
| TITLE:=Parallel port line printer device support |
| DEPENDS:=+kmod-ppdev |
| KCONFIG:= \ |
| CONFIG_PRINTER |
| FILES:= \ |
| $(LINUX_DIR)/drivers/char/lp.ko |
| AUTOLOAD:=$(call AutoLoad,52,lp) |
| endef |
| |
| $(eval $(call KernelPackage,lp)) |
| |
| |
| define KernelPackage/mmc |
| SUBMENU:=$(OTHER_MENU) |
| TITLE:=MMC/SD Card Support |
| DEPENDS:=@!TARGET_uml |
| KCONFIG:= \ |
| CONFIG_MMC \ |
| CONFIG_MMC_BLOCK \ |
| CONFIG_MMC_DEBUG=n \ |
| CONFIG_MMC_UNSAFE_RESUME=n \ |
| CONFIG_MMC_TIFM_SD=n \ |
| CONFIG_MMC_WBSD=n \ |
| CONFIG_SDIO_UART=n |
| FILES:= \ |
| $(LINUX_DIR)/drivers/mmc/core/mmc_core.ko \ |
| $(LINUX_DIR)/drivers/mmc/core/mmc_block.ko |
| AUTOLOAD:=$(call AutoProbe,mmc_core mmc_block,1) |
| endef |
| |
| define KernelPackage/mmc/description |
| Kernel support for MMC/SD cards |
| endef |
| |
| $(eval $(call KernelPackage,mmc)) |
| |
| |
| define KernelPackage/sdhci |
| SUBMENU:=$(OTHER_MENU) |
| TITLE:=Secure Digital Host Controller Interface support |
| DEPENDS:=+kmod-mmc |
| KCONFIG:= \ |
| CONFIG_MMC_SDHCI \ |
| CONFIG_MMC_SDHCI_PLTFM \ |
| CONFIG_MMC_SDHCI_PCI=n |
| FILES:= \ |
| $(LINUX_DIR)/drivers/mmc/host/sdhci.ko \ |
| $(LINUX_DIR)/drivers/mmc/host/sdhci-pltfm.ko |
| |
| AUTOLOAD:=$(call AutoProbe,sdhci-pltfm,1) |
| endef |
| |
| define KernelPackage/sdhci/description |
| Kernel support for SDHCI Hosts |
| endef |
| |
| $(eval $(call KernelPackage,sdhci)) |
| |
| |
| define KernelPackage/serdev |
| SUBMENU:=$(OTHER_MENU) |
| TITLE:=Serial device bus support |
| KCONFIG:=CONFIG_SERIAL_DEV_BUS |
| FILES:= \ |
| $(LINUX_DIR)/drivers/tty/serdev/serdev.ko |
| AUTOLOAD:=$(call AutoProbe,serdev) |
| endef |
| |
| define KernelPackage/serdev/description |
| Kernel support for devices connected via a serial port |
| endef |
| |
| $(eval $(call KernelPackage,serdev)) |
| |
| |
| define KernelPackage/rfkill |
| SUBMENU:=$(OTHER_MENU) |
| TITLE:=RF switch subsystem support |
| DEPENDS:=@USE_RFKILL +kmod-input-core |
| KCONFIG:= \ |
| CONFIG_RFKILL_FULL \ |
| CONFIG_RFKILL_GPIO=y \ |
| CONFIG_RFKILL_INPUT=y \ |
| CONFIG_RFKILL_LEDS=y |
| FILES:= \ |
| $(LINUX_DIR)/net/rfkill/rfkill.ko \ |
| $(LINUX_DIR)/net/rfkill/rfkill-gpio.ko |
| AUTOLOAD:=$(call AutoLoad,20,rfkill-gpio) |
| endef |
| |
| define KernelPackage/rfkill/description |
| Say Y here if you want to have control over RF switches |
| found on many WiFi and Bluetooth cards |
| endef |
| |
| $(eval $(call KernelPackage,rfkill)) |
| |
| |
| define KernelPackage/softdog |
| SUBMENU:=$(OTHER_MENU) |
| TITLE:=Software watchdog driver |
| KCONFIG:=CONFIG_SOFT_WATCHDOG \ |
| CONFIG_SOFT_WATCHDOG_PRETIMEOUT=n |
| FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/softdog.ko |
| AUTOLOAD:=$(call AutoLoad,50,softdog,1) |
| endef |
| |
| define KernelPackage/softdog/description |
| Software watchdog driver |
| endef |
| |
| $(eval $(call KernelPackage,softdog)) |
| |
| |
| define KernelPackage/ssb |
| SUBMENU:=$(OTHER_MENU) |
| TITLE:=Silicon Sonics Backplane glue code |
| DEPENDS:=@PCI_SUPPORT @!TARGET_bcm47xx @!TARGET_bcm63xx |
| KCONFIG:=\ |
| CONFIG_SSB \ |
| CONFIG_SSB_B43_PCI_BRIDGE=y \ |
| CONFIG_SSB_DRIVER_MIPS=n \ |
| CONFIG_SSB_DRIVER_PCICORE=y \ |
| CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y \ |
| CONFIG_SSB_FALLBACK_SPROM=y \ |
| CONFIG_SSB_PCIHOST=y \ |
| CONFIG_SSB_PCIHOST_POSSIBLE=y \ |
| CONFIG_SSB_POSSIBLE=y \ |
| CONFIG_SSB_SPROM=y \ |
| CONFIG_SSB_SILENT=y |
| FILES:=$(LINUX_DIR)/drivers/ssb/ssb.ko |
| AUTOLOAD:=$(call AutoLoad,18,ssb,1) |
| endef |
| |
| define KernelPackage/ssb/description |
| Silicon Sonics Backplane glue code. |
| endef |
| |
| $(eval $(call KernelPackage,ssb)) |
| |
| |
| define KernelPackage/bcma |
| SUBMENU:=$(OTHER_MENU) |
| TITLE:=BCMA support |
| DEPENDS:=@PCI_SUPPORT @!TARGET_bcm47xx @!TARGET_bcm53xx |
| KCONFIG:=\ |
| CONFIG_BCMA \ |
| CONFIG_BCMA_POSSIBLE=y \ |
| CONFIG_BCMA_BLOCKIO=y \ |
| CONFIG_BCMA_FALLBACK_SPROM=y \ |
| CONFIG_BCMA_HOST_PCI_POSSIBLE=y \ |
| CONFIG_BCMA_HOST_PCI=y \ |
| CONFIG_BCMA_HOST_SOC=n \ |
| CONFIG_BCMA_DRIVER_MIPS=n \ |
| CONFIG_BCMA_DRIVER_PCI_HOSTMODE=n \ |
| CONFIG_BCMA_DRIVER_GMAC_CMN=n \ |
| CONFIG_BCMA_DEBUG=n |
| FILES:=$(LINUX_DIR)/drivers/bcma/bcma.ko |
| AUTOLOAD:=$(call AutoLoad,29,bcma) |
| endef |
| |
| define KernelPackage/bcma/description |
| Bus driver for Broadcom specific Advanced Microcontroller Bus Architecture |
| endef |
| |
| $(eval $(call KernelPackage,bcma)) |
| |
| |
| define KernelPackage/rtc-ds1307 |
| SUBMENU:=$(OTHER_MENU) |
| TITLE:=Dallas/Maxim DS1307 (and compatible) RTC support |
| DEFAULT:=m if ALL_KMODS && RTC_SUPPORT |
| DEPENDS:=+kmod-i2c-core +kmod-regmap-i2c +kmod-hwmon-core |
| KCONFIG:=CONFIG_RTC_DRV_DS1307 \ |
| CONFIG_RTC_CLASS=y |
| FILES:=$(LINUX_DIR)/drivers/rtc/rtc-ds1307.ko |
| AUTOLOAD:=$(call AutoProbe,rtc-ds1307) |
| endef |
| |
| define KernelPackage/rtc-ds1307/description |
| Kernel module for Dallas/Maxim DS1307/DS1337/DS1338/DS1340/DS1388/DS3231, |
| Epson RX-8025 and various other compatible RTC chips connected via I2C. |
| endef |
| |
| $(eval $(call KernelPackage,rtc-ds1307)) |
| |
| |
| define KernelPackage/rtc-ds1374 |
| SUBMENU:=$(OTHER_MENU) |
| TITLE:=Dallas/Maxim DS1374 RTC support |
| DEFAULT:=m if ALL_KMODS && RTC_SUPPORT |
| DEPENDS:=+kmod-i2c-core |
| KCONFIG:=CONFIG_RTC_DRV_DS1374 \ |
| CONFIG_RTC_DRV_DS1374_WDT=n \ |
| CONFIG_RTC_CLASS=y |
| FILES:=$(LINUX_DIR)/drivers/rtc/rtc-ds1374.ko |
| AUTOLOAD:=$(call AutoProbe,rtc-ds1374) |
| endef |
| |
| define KernelPackage/rtc-ds1374/description |
| Kernel module for Dallas/Maxim DS1374. |
| endef |
| |
| $(eval $(call KernelPackage,rtc-ds1374)) |
| |
| |
| define KernelPackage/rtc-ds1672 |
| SUBMENU:=$(OTHER_MENU) |
| TITLE:=Dallas/Maxim DS1672 RTC support |
| DEFAULT:=m if ALL_KMODS && RTC_SUPPORT |
| DEPENDS:=+kmod-i2c-core |
| KCONFIG:=CONFIG_RTC_DRV_DS1672 \ |
| CONFIG_RTC_CLASS=y |
| FILES:=$(LINUX_DIR)/drivers/rtc/rtc-ds1672.ko |
| AUTOLOAD:=$(call AutoProbe,rtc-ds1672) |
| endef |
| |
| define KernelPackage/rtc-ds1672/description |
| Kernel module for Dallas/Maxim DS1672 RTC. |
| endef |
| |
| $(eval $(call KernelPackage,rtc-ds1672)) |
| |
| |
| define KernelPackage/rtc-em3027 |
| SUBMENU:=$(OTHER_MENU) |
| TITLE:=Microelectronic EM3027 RTC support |
| DEFAULT:=m if ALL_KMODS && RTC_SUPPORT |
| DEPENDS:=+kmod-i2c-core |
| KCONFIG:=CONFIG_RTC_DRV_EM3027 \ |
| CONFIG_RTC_CLASS=y |
| FILES:=$(LINUX_DIR)/drivers/rtc/rtc-em3027.ko |
| AUTOLOAD:=$(call AutoProbe,rtc-em3027) |
| endef |
| |
| define KernelPackage/rtc-em3027/description |
| Kernel module for Microelectronic EM3027 RTC. |
| endef |
| |
| $(eval $(call KernelPackage,rtc-em3027)) |
| |
| |
| define KernelPackage/rtc-isl1208 |
| SUBMENU:=$(OTHER_MENU) |
| TITLE:=Intersil ISL1208 RTC support |
| DEFAULT:=m if ALL_KMODS && RTC_SUPPORT |
| DEPENDS:=+kmod-i2c-core |
| KCONFIG:=CONFIG_RTC_DRV_ISL1208 \ |
| CONFIG_RTC_CLASS=y |
| FILES:=$(LINUX_DIR)/drivers/rtc/rtc-isl1208.ko |
| AUTOLOAD:=$(call AutoProbe,rtc-isl1208) |
| endef |
| |
| define KernelPackage/rtc-isl1208/description |
| Kernel module for Intersil ISL1208 RTC. |
| endef |
| |
| $(eval $(call KernelPackage,rtc-isl1208)) |
| |
| |
| define KernelPackage/rtc-mv |
| SUBMENU:=$(OTHER_MENU) |
| TITLE:=Marvell SoC RTC support |
| DEFAULT:=m if ALL_KMODS && RTC_SUPPORT |
| KCONFIG:=CONFIG_RTC_DRV_MV \ |
| CONFIG_RTC_CLASS=y |
| FILES:=$(LINUX_DIR)/drivers/rtc/rtc-mv.ko |
| AUTOLOAD:=$(call AutoProbe,rtc-mv) |
| endef |
| |
| define KernelPackage/rtc-mv/description |
| Kernel module for Marvell SoC RTC. |
| endef |
| |
| $(eval $(call KernelPackage,rtc-mv)) |
| |
| |
| define KernelPackage/rtc-pcf8563 |
| SUBMENU:=$(OTHER_MENU) |
| TITLE:=Philips PCF8563/Epson RTC8564 RTC support |
| DEFAULT:=m if ALL_KMODS && RTC_SUPPORT |
| DEPENDS:=+kmod-i2c-core |
| KCONFIG:=CONFIG_RTC_DRV_PCF8563 \ |
| CONFIG_RTC_CLASS=y |
| FILES:=$(LINUX_DIR)/drivers/rtc/rtc-pcf8563.ko |
| AUTOLOAD:=$(call AutoProbe,rtc-pcf8563) |
| endef |
| |
| define KernelPackage/rtc-pcf8563/description |
| Kernel module for Philips PCF8563 RTC chip. |
| The Epson RTC8564 should work as well. |
| endef |
| |
| $(eval $(call KernelPackage,rtc-pcf8563)) |
| |
| |
| define KernelPackage/rtc-pcf2123 |
| SUBMENU:=$(OTHER_MENU) |
| TITLE:=Philips PCF2123 RTC support |
| DEFAULT:=m if ALL_KMODS && RTC_SUPPORT |
| DEPENDS:=+kmod-regmap-spi |
| KCONFIG:=CONFIG_RTC_DRV_PCF2123 \ |
| CONFIG_RTC_CLASS=y |
| FILES:=$(LINUX_DIR)/drivers/rtc/rtc-pcf2123.ko |
| AUTOLOAD:=$(call AutoProbe,rtc-pcf2123) |
| endef |
| |
| define KernelPackage/rtc-pcf2123/description |
| Kernel module for Philips PCF2123 RTC chip |
| endef |
| |
| $(eval $(call KernelPackage,rtc-pcf2123)) |
| |
| define KernelPackage/rtc-pcf2127 |
| SUBMENU:=$(OTHER_MENU) |
| TITLE:=NXP PCF2127 and PCF2129 RTC support |
| DEFAULT:=m if ALL_KMODS && RTC_SUPPORT |
| DEPENDS:=+kmod-i2c-core +kmod-regmap-spi |
| KCONFIG:=CONFIG_RTC_DRV_PCF2127 \ |
| CONFIG_RTC_CLASS=y |
| FILES:=$(LINUX_DIR)/drivers/rtc/rtc-pcf2127.ko |
| AUTOLOAD:=$(call AutoProbe,rtc-pcf2127) |
| endef |
| |
| define KernelPackage/rtc-pcf2127/description |
| Kernel module for NXP PCF2127 and PCF2129 RTC chip |
| endef |
| |
| $(eval $(call KernelPackage,rtc-pcf2127)) |
| |
| define KernelPackage/rtc-r7301 |
| SUBMENU:=$(OTHER_MENU) |
| TITLE:=Epson RTC7301 support |
| DEFAULT:=m if ALL_KMODS && RTC_SUPPORT |
| DEPENDS:=+kmod-regmap-mmio |
| KCONFIG:=CONFIG_RTC_DRV_R7301 \ |
| CONFIG_RTC_CLASS=y |
| FILES:=$(LINUX_DIR)/drivers/rtc/rtc-r7301.ko |
| AUTOLOAD:=$(call AutoProbe,rtc-r7301) |
| endef |
| |
| define KernelPackage/rtc-r7301/description |
| Kernel module for Epson RTC7301 RTC chip |
| endef |
| |
| $(eval $(call KernelPackage,rtc-r7301)) |
| |
| define KernelPackage/rtc-rs5c372a |
| SUBMENU:=$(OTHER_MENU) |
| TITLE:=Ricoh R2025S/D, RS5C372A/B, RV5C386, RV5C387A |
| DEFAULT:=m if ALL_KMODS && RTC_SUPPORT |
| DEPENDS:=+kmod-i2c-core |
| KCONFIG:=CONFIG_RTC_DRV_RS5C372 \ |
| CONFIG_RTC_CLASS=y |
| FILES:=$(LINUX_DIR)/drivers/rtc/rtc-rs5c372.ko |
| AUTOLOAD:=$(call AutoLoad,50,rtc-rs5c372,1) |
| endef |
| |
| define KernelPackage/rtc-rs5c372a/description |
| Kernel module for Ricoh R2025S/D, RS5C372A/B, RV5C386, RV5C387A RTC on chip module |
| endef |
| |
| $(eval $(call KernelPackage,rtc-rs5c372a)) |
| |
| define KernelPackage/rtc-rx8025 |
| SUBMENU:=$(OTHER_MENU) |
| TITLE:=Epson RX-8025 / RX-8035 |
| DEFAULT:=m if ALL_KMODS && RTC_SUPPORT |
| DEPENDS:=+kmod-i2c-core |
| KCONFIG:=CONFIG_RTC_DRV_RX8025 \ |
| CONFIG_RTC_CLASS=y |
| FILES:=$(LINUX_DIR)/drivers/rtc/rtc-rx8025.ko |
| AUTOLOAD:=$(call AutoLoad,50,rtc-rx8025,1) |
| endef |
| |
| define KernelPackage/rtc-rx8025/description |
| Kernel module for Epson RX-8025 and RX-8035 I2C RTC chip |
| endef |
| |
| $(eval $(call KernelPackage,rtc-rx8025)) |
| |
| define KernelPackage/rtc-s35390a |
| SUBMENU:=$(OTHER_MENU) |
| TITLE:=Seico S-35390A |
| DEFAULT:=m if ALL_KMODS && RTC_SUPPORT |
| DEPENDS:=+kmod-i2c-core |
| KCONFIG:=CONFIG_RTC_DRV_S35390A \ |
| CONFIG_RTC_CLASS=y |
| FILES:=$(LINUX_DIR)/drivers/rtc/rtc-s35390a.ko |
| AUTOLOAD:=$(call AutoLoad,50,rtc-s35390a,1) |
| endef |
| |
| define KernelPackage/rtc-s35390a/description |
| Kernel module for Seiko Instruments S-35390A I2C RTC chip |
| endef |
| |
| $(eval $(call KernelPackage,rtc-s35390a)) |
| |
| define KernelPackage/rtc-x1205 |
| SUBMENU:=$(OTHER_MENU) |
| TITLE:=Xicor Intersil X1205 |
| DEFAULT:=m if ALL_KMODS && RTC_SUPPORT |
| DEPENDS:=+kmod-i2c-core |
| KCONFIG:=CONFIG_RTC_DRV_X1205 \ |
| CONFIG_RTC_CLASS=y |
| FILES:=$(LINUX_DIR)/drivers/rtc/rtc-x1205.ko |
| AUTOLOAD:=$(call AutoProbe,rtc-x1205) |
| endef |
| |
| define KernelPackage/rtc-x1205/description |
| Kernel module for Xicor Intersil X1205 I2C RTC chip |
| endef |
| |
| $(eval $(call KernelPackage,rtc-x1205)) |
| |
| define KernelPackage/mtdtests |
| SUBMENU:=$(OTHER_MENU) |
| TITLE:=MTD subsystem tests |
| KCONFIG:=CONFIG_MTD_TESTS |
| FILES:=\ |
| $(LINUX_DIR)/drivers/mtd/tests/mtd_nandecctest.ko \ |
| $(LINUX_DIR)/drivers/mtd/tests/mtd_oobtest.ko \ |
| $(LINUX_DIR)/drivers/mtd/tests/mtd_pagetest.ko \ |
| $(LINUX_DIR)/drivers/mtd/tests/mtd_readtest.ko \ |
| $(LINUX_DIR)/drivers/mtd/tests/mtd_speedtest.ko \ |
| $(LINUX_DIR)/drivers/mtd/tests/mtd_stresstest.ko \ |
| $(LINUX_DIR)/drivers/mtd/tests/mtd_subpagetest.ko \ |
| $(LINUX_DIR)/drivers/mtd/tests/mtd_torturetest.ko |
| endef |
| |
| define KernelPackage/mtdtests/description |
| Kernel modules for MTD subsystem/driver testing |
| endef |
| |
| $(eval $(call KernelPackage,mtdtests)) |
| |
| |
| define KernelPackage/mtdoops |
| SUBMENU:=$(OTHER_MENU) |
| TITLE:=Log panic/oops to an MTD buffer |
| KCONFIG:=CONFIG_MTD_OOPS |
| FILES:=$(LINUX_DIR)/drivers/mtd/mtdoops.ko |
| endef |
| |
| define KernelPackage/mtdoops/description |
| Kernel modules for Log panic/oops to an MTD buffer |
| endef |
| |
| $(eval $(call KernelPackage,mtdoops)) |
| |
| |
| define KernelPackage/mtdram |
| SUBMENU:=$(OTHER_MENU) |
| TITLE:=Test MTD driver using RAM |
| KCONFIG:=CONFIG_MTD_MTDRAM \ |
| CONFIG_MTDRAM_TOTAL_SIZE=4096 \ |
| CONFIG_MTDRAM_ERASE_SIZE=128 |
| FILES:=$(LINUX_DIR)/drivers/mtd/devices/mtdram.ko |
| endef |
| |
| define KernelPackage/mtdram/description |
| Test MTD driver using RAM |
| endef |
| |
| $(eval $(call KernelPackage,mtdram)) |
| |
| |
| define KernelPackage/ramoops |
| SUBMENU:=$(OTHER_MENU) |
| TITLE:=Ramoops (pstore-ram) |
| DEFAULT:=m if ALL_KMODS |
| KCONFIG:=CONFIG_PSTORE_RAM \ |
| CONFIG_PSTORE_CONSOLE=y |
| DEPENDS:=+kmod-pstore +kmod-reed-solomon |
| FILES:= $(LINUX_DIR)/fs/pstore/ramoops.ko |
| AUTOLOAD:=$(call AutoLoad,30,ramoops,1) |
| endef |
| |
| define KernelPackage/ramoops/description |
| Kernel module for pstore-ram (ramoops) crash log storage |
| endef |
| |
| $(eval $(call KernelPackage,ramoops)) |
| |
| |
| define KernelPackage/reed-solomon |
| SUBMENU:=$(OTHER_MENU) |
| TITLE:=Reed-Solomon error correction |
| DEFAULT:=m if ALL_KMODS |
| KCONFIG:=CONFIG_REED_SOLOMON \ |
| CONFIG_REED_SOLOMON_DEC8=y \ |
| CONFIG_REED_SOLOMON_ENC8=y |
| FILES:= $(LINUX_DIR)/lib/reed_solomon/reed_solomon.ko |
| AUTOLOAD:=$(call AutoLoad,30,reed_solomon,1) |
| endef |
| |
| define KernelPackage/reed-solomon/description |
| Kernel module for Reed-Solomon error correction |
| endef |
| |
| $(eval $(call KernelPackage,reed-solomon)) |
| |
| |
| define KernelPackage/serial-8250 |
| SUBMENU:=$(OTHER_MENU) |
| TITLE:=8250 UARTs |
| KCONFIG:= CONFIG_SERIAL_8250 \ |
| CONFIG_SERIAL_8250_PCI \ |
| CONFIG_SERIAL_8250_NR_UARTS=16 \ |
| CONFIG_SERIAL_8250_RUNTIME_UARTS=16 \ |
| CONFIG_SERIAL_8250_EXTENDED=y \ |
| CONFIG_SERIAL_8250_MANY_PORTS=y \ |
| CONFIG_SERIAL_8250_SHARE_IRQ=y \ |
| CONFIG_SERIAL_8250_DETECT_IRQ=n \ |
| CONFIG_SERIAL_8250_RSA=n |
| FILES:= \ |
| $(LINUX_DIR)/drivers/tty/serial/8250/8250.ko \ |
| $(LINUX_DIR)/drivers/tty/serial/8250/8250_base.ko \ |
| $(if $(CONFIG_PCI),$(LINUX_DIR)/drivers/tty/serial/8250/8250_pci.ko) \ |
| $(if $(CONFIG_GPIOLIB),$(LINUX_DIR)/drivers/tty/serial/serial_mctrl_gpio.ko) |
| AUTOLOAD:=$(call AutoProbe,8250 8250_base 8250_pci) |
| endef |
| |
| define KernelPackage/serial-8250/description |
| Kernel module for 8250 UART based serial ports |
| endef |
| |
| $(eval $(call KernelPackage,serial-8250)) |
| |
| |
| define KernelPackage/serial-8250-exar |
| SUBMENU:=$(OTHER_MENU) |
| TITLE:=Exar 8250 UARTs |
| KCONFIG:= CONFIG_SERIAL_8250_EXAR |
| FILES:=$(LINUX_DIR)/drivers/tty/serial/8250/8250_exar.ko |
| AUTOLOAD:=$(call AutoProbe,8250 8250_base 8250_exar) |
| DEPENDS:=@PCI_SUPPORT +kmod-serial-8250 |
| endef |
| |
| define KernelPackage/serial-8250-exar/description |
| Kernel module for Exar serial ports |
| endef |
| |
| $(eval $(call KernelPackage,serial-8250-exar)) |
| |
| |
| define KernelPackage/regmap-core |
| SUBMENU:=$(OTHER_MENU) |
| TITLE:=Generic register map support |
| HIDDEN:=1 |
| KCONFIG:=CONFIG_REGMAP |
| ifneq ($(wildcard $(LINUX_DIR)/drivers/base/regmap/regmap-core.ko),) |
| FILES:=$(LINUX_DIR)/drivers/base/regmap/regmap-core.ko |
| endif |
| endef |
| |
| define KernelPackage/regmap-core/description |
| Generic register map support |
| endef |
| |
| $(eval $(call KernelPackage,regmap-core)) |
| |
| |
| define KernelPackage/regmap-spi |
| SUBMENU:=$(OTHER_MENU) |
| TITLE:=SPI register map support |
| DEPENDS:=+kmod-regmap-core |
| HIDDEN:=1 |
| KCONFIG:=CONFIG_REGMAP_SPI \ |
| CONFIG_SPI=y |
| FILES:=$(LINUX_DIR)/drivers/base/regmap/regmap-spi.ko |
| endef |
| |
| define KernelPackage/regmap-spi/description |
| SPI register map support |
| endef |
| |
| $(eval $(call KernelPackage,regmap-spi)) |
| |
| |
| define KernelPackage/regmap-i2c |
| SUBMENU:=$(OTHER_MENU) |
| TITLE:=I2C register map support |
| DEPENDS:=+kmod-regmap-core +kmod-i2c-core |
| HIDDEN:=1 |
| KCONFIG:=CONFIG_REGMAP_I2C |
| FILES:=$(LINUX_DIR)/drivers/base/regmap/regmap-i2c.ko |
| endef |
| |
| define KernelPackage/regmap-i2c/description |
| I2C register map support |
| endef |
| |
| $(eval $(call KernelPackage,regmap-i2c)) |
| |
| |
| define KernelPackage/regmap-mmio |
| SUBMENU:=$(OTHER_MENU) |
| TITLE:=MMIO register map support |
| DEPENDS:=+kmod-regmap-core |
| HIDDEN:=1 |
| KCONFIG:=CONFIG_REGMAP_MMIO |
| FILES:=$(LINUX_DIR)/drivers/base/regmap/regmap-mmio.ko |
| endef |
| |
| define KernelPackage/regmap-mmio/description |
| MMIO register map support |
| endef |
| |
| $(eval $(call KernelPackage,regmap-mmio)) |
| |
| |
| define KernelPackage/ikconfig |
| SUBMENU:=$(OTHER_MENU) |
| TITLE:=Kernel configuration via /proc/config.gz |
| KCONFIG:=CONFIG_IKCONFIG \ |
| CONFIG_IKCONFIG_PROC=y |
| FILES:=$(LINUX_DIR)/kernel/configs.ko |
| AUTOLOAD:=$(call AutoLoad,70,configs) |
| endef |
| |
| define KernelPackage/ikconfig/description |
| Kernel configuration via /proc/config.gz |
| endef |
| |
| $(eval $(call KernelPackage,ikconfig)) |
| |
| |
| define KernelPackage/zram |
| SUBMENU:=$(OTHER_MENU) |
| TITLE:=ZRAM |
| DEPENDS:=+kmod-lib-lzo |
| KCONFIG:= \ |
| CONFIG_ZSMALLOC \ |
| CONFIG_ZRAM \ |
| CONFIG_ZRAM_DEBUG=n \ |
| CONFIG_PGTABLE_MAPPING=n \ |
| CONFIG_ZRAM_WRITEBACK=n \ |
| CONFIG_ZSMALLOC_STAT=n |
| FILES:= \ |
| $(LINUX_DIR)/mm/zsmalloc.ko \ |
| $(LINUX_DIR)/drivers/block/zram/zram.ko |
| AUTOLOAD:=$(call AutoLoad,20,zsmalloc zram) |
| endef |
| |
| define KernelPackage/zram/description |
| Compressed RAM block device support |
| endef |
| |
| $(eval $(call KernelPackage,zram)) |
| |
| define KernelPackage/pps |
| SUBMENU:=$(OTHER_MENU) |
| TITLE:=PPS support |
| KCONFIG:=CONFIG_PPS |
| FILES:=$(LINUX_DIR)/drivers/pps/pps_core.ko |
| AUTOLOAD:=$(call AutoLoad,17,pps_core,1) |
| endef |
| |
| define KernelPackage/pps/description |
| PPS (Pulse Per Second) is a special pulse provided by some GPS |
| antennae. Userland can use it to get a high-precision time |
| reference. |
| endef |
| |
| $(eval $(call KernelPackage,pps)) |
| |
| |
| define KernelPackage/pps-gpio |
| SUBMENU:=$(OTHER_MENU) |
| TITLE:=PPS client using GPIO |
| DEPENDS:=+kmod-pps |
| KCONFIG:=CONFIG_PPS_CLIENT_GPIO |
| FILES:=$(LINUX_DIR)/drivers/pps/clients/pps-gpio.ko |
| AUTOLOAD:=$(call AutoLoad,18,pps-gpio,1) |
| endef |
| |
| define KernelPackage/pps-gpio/description |
| Support for a PPS source using GPIO. To be useful you must |
| also register a platform device specifying the GPIO pin and |
| other options, usually in your board setup. |
| endef |
| |
| $(eval $(call KernelPackage,pps-gpio)) |
| |
| |
| define KernelPackage/pps-ldisc |
| SUBMENU:=$(OTHER_MENU) |
| TITLE:=PPS line discipline |
| DEPENDS:=+kmod-pps |
| KCONFIG:=CONFIG_PPS_CLIENT_LDISC |
| FILES:=$(LINUX_DIR)/drivers/pps/clients/pps-ldisc.ko |
| AUTOLOAD:=$(call AutoLoad,18,pps-ldisc,1) |
| endef |
| |
| define KernelPackage/pps-ldisc/description |
| Support for a PPS source connected with the CD (Carrier |
| Detect) pin of your serial port. |
| endef |
| |
| $(eval $(call KernelPackage,pps-ldisc)) |
| |
| |
| define KernelPackage/ptp |
| SUBMENU:=$(OTHER_MENU) |
| TITLE:=PTP clock support |
| DEPENDS:=+kmod-pps |
| KCONFIG:= \ |
| CONFIG_PTP_1588_CLOCK \ |
| CONFIG_NET_PTP_CLASSIFY=y |
| FILES:=$(LINUX_DIR)/drivers/ptp/ptp.ko |
| AUTOLOAD:=$(call AutoLoad,18,ptp,1) |
| endef |
| |
| define KernelPackage/ptp/description |
| The IEEE 1588 standard defines a method to precisely |
| synchronize distributed clocks over Ethernet networks. |
| endef |
| |
| $(eval $(call KernelPackage,ptp)) |
| |
| |
| define KernelPackage/ptp-qoriq |
| SUBMENU:=$(OTHER_MENU) |
| TITLE:=Freescale QorIQ PTP support |
| DEPENDS:=@(TARGET_mpc85xx||TARGET_qoriq) +kmod-ptp |
| KCONFIG:=CONFIG_PTP_1588_CLOCK_QORIQ |
| FILES:=$(LINUX_DIR)/drivers/ptp/ptp-qoriq.ko |
| AUTOLOAD:=$(call AutoProbe,ptp-qoriq) |
| endef |
| |
| |
| define KernelPackage/ptp-qoriq/description |
| Kernel module for IEEE 1588 support for Freescale |
| QorIQ Ethernet drivers |
| endef |
| |
| $(eval $(call KernelPackage,ptp-qoriq)) |
| |
| define KernelPackage/random-core |
| SUBMENU:=$(OTHER_MENU) |
| TITLE:=Hardware Random Number Generator Core support |
| KCONFIG:=CONFIG_HW_RANDOM |
| FILES:=$(LINUX_DIR)/drivers/char/hw_random/rng-core.ko |
| endef |
| |
| define KernelPackage/random-core/description |
| Kernel module for the HW random number generator core infrastructure |
| endef |
| |
| $(eval $(call KernelPackage,random-core)) |
| |
| |
| define KernelPackage/thermal |
| SUBMENU:=$(OTHER_MENU) |
| TITLE:=Thermal driver |
| DEPENDS:=+kmod-hwmon-core |
| HIDDEN:=1 |
| KCONFIG:= \ |
| CONFIG_THERMAL=y \ |
| CONFIG_THERMAL_OF=y \ |
| CONFIG_CPU_THERMAL=y \ |
| CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y \ |
| CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE=n \ |
| CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE=n \ |
| CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 \ |
| CONFIG_THERMAL_GOV_FAIR_SHARE=n \ |
| CONFIG_THERMAL_GOV_STEP_WISE=y \ |
| CONFIG_THERMAL_GOV_USER_SPACE=n \ |
| CONFIG_THERMAL_HWMON=y \ |
| CONFIG_THERMAL_EMULATION=n |
| endef |
| |
| define KernelPackage/thermal/description |
| Thermal driver offers a generic mechanism for thermal management. |
| Usually it's made up of one or more thermal zone and cooling device. |
| endef |
| |
| $(eval $(call KernelPackage,thermal)) |
| |
| |
| define KernelPackage/echo |
| SUBMENU:=$(OTHER_MENU) |
| TITLE:=Line Echo Canceller |
| KCONFIG:=CONFIG_ECHO |
| FILES:=$(LINUX_DIR)/drivers/misc/echo/echo.ko |
| AUTOLOAD:=$(call AutoLoad,50,echo) |
| endef |
| |
| define KernelPackage/echo/description |
| This driver provides line echo cancelling support for mISDN and |
| DAHDI drivers |
| endef |
| |
| $(eval $(call KernelPackage,echo)) |
| |
| |
| define KernelPackage/keys-encrypted |
| SUBMENU:=$(OTHER_MENU) |
| TITLE:=encrypted keys on kernel keyring |
| DEPENDS:=@KERNEL_KEYS +kmod-crypto-cbc +kmod-crypto-hmac +kmod-crypto-rng \ |
| +kmod-crypto-sha256 +kmod-keys-trusted |
| KCONFIG:=CONFIG_ENCRYPTED_KEYS |
| FILES:=$(LINUX_DIR)/security/keys/encrypted-keys/encrypted-keys.ko |
| AUTOLOAD:=$(call AutoLoad,01,encrypted-keys,1) |
| endef |
| |
| define KernelPackage/keys-encrypted/description |
| This module provides support for create/encrypting/decrypting keys |
| in the kernel. Encrypted keys are kernel generated random numbers, |
| which are encrypted/decrypted with a 'master' symmetric key. The |
| 'master' key can be either a trusted-key or user-key type. |
| Userspace only ever sees/stores encrypted blobs. |
| endef |
| |
| $(eval $(call KernelPackage,keys-encrypted)) |
| |
| |
| define KernelPackage/keys-trusted |
| SUBMENU:=$(OTHER_MENU) |
| TITLE:=TPM trusted keys on kernel keyring |
| DEPENDS:=@KERNEL_KEYS +kmod-crypto-hash +kmod-crypto-hmac +kmod-crypto-sha1 +kmod-tpm |
| KCONFIG:=CONFIG_TRUSTED_KEYS |
| FILES:= \ |
| $(LINUX_DIR)/security/keys/trusted.ko@lt5.10 \ |
| $(LINUX_DIR)/security/keys/trusted-keys/trusted.ko@ge5.10 |
| AUTOLOAD:=$(call AutoLoad,01,trusted-keys,1) |
| endef |
| |
| define KernelPackage/keys-trusted/description |
| This module provides support for creating, sealing, and unsealing |
| keys in the kernel. Trusted keys are random number symmetric keys, |
| generated and RSA-sealed by the TPM. The TPM only unseals the keys, |
| if the boot PCRs and other criteria match. Userspace will only ever |
| see encrypted blobs. |
| endef |
| |
| $(eval $(call KernelPackage,keys-trusted)) |
| |
| |
| define KernelPackage/tpm |
| SUBMENU:=$(OTHER_MENU) |
| TITLE:=TPM Hardware Support |
| DEPENDS:= +kmod-random-core +kmod-asn1-decoder \ |
| +kmod-asn1-encoder +kmod-oid-registry |
| KCONFIG:= CONFIG_TCG_TPM |
| FILES:= $(LINUX_DIR)/drivers/char/tpm/tpm.ko |
| AUTOLOAD:=$(call AutoLoad,10,tpm,1) |
| endef |
| |
| define KernelPackage/tpm/description |
| This enables TPM Hardware Support. |
| endef |
| |
| $(eval $(call KernelPackage,tpm)) |
| |
| define KernelPackage/tpm-tis |
| SUBMENU:=$(OTHER_MENU) |
| TITLE:=TPM TIS 1.2 Interface / TPM 2.0 FIFO Interface |
| DEPENDS:= @TARGET_x86 +kmod-tpm |
| KCONFIG:= CONFIG_TCG_TIS |
| FILES:= \ |
| $(LINUX_DIR)/drivers/char/tpm/tpm_tis.ko \ |
| $(LINUX_DIR)/drivers/char/tpm/tpm_tis_core.ko |
| AUTOLOAD:=$(call AutoLoad,20,tpm_tis,1) |
| endef |
| |
| define KernelPackage/tpm-tis/description |
| If you have a TPM security chip that is compliant with the |
| TCG TIS 1.2 TPM specification (TPM1.2) or the TCG PTP FIFO |
| specification (TPM2.0) say Yes and it will be accessible from |
| within Linux. |
| endef |
| |
| $(eval $(call KernelPackage,tpm-tis)) |
| |
| define KernelPackage/tpm-i2c-atmel |
| SUBMENU:=$(OTHER_MENU) |
| TITLE:=TPM I2C Atmel Support |
| DEPENDS:= +kmod-tpm +kmod-i2c-core |
| KCONFIG:= CONFIG_TCG_TIS_I2C_ATMEL |
| FILES:= $(LINUX_DIR)/drivers/char/tpm/tpm_i2c_atmel.ko |
| AUTOLOAD:=$(call AutoLoad,40,tpm_i2c_atmel,1) |
| endef |
| |
| define KernelPackage/tpm-i2c-atmel/description |
| This enables the TPM Interface Specification 1.2 Interface (I2C - Atmel) |
| endef |
| |
| $(eval $(call KernelPackage,tpm-i2c-atmel)) |
| |
| define KernelPackage/tpm-i2c-infineon |
| SUBMENU:=$(OTHER_MENU) |
| TITLE:= TPM I2C Infineon driver |
| DEPENDS:= +kmod-tpm +kmod-i2c-core |
| KCONFIG:= CONFIG_TCG_TIS_I2C_INFINEON |
| FILES:= $(LINUX_DIR)/drivers/char/tpm/tpm_i2c_infineon.ko |
| AUTOLOAD:= $(call AutoLoad,40,tpm_i2c_infineon,1) |
| endef |
| |
| define KernelPackage/tpm-i2c-infineon/description |
| This enables the TPM Interface Specification 1.2 Interface (I2C - Infineon) |
| endef |
| |
| $(eval $(call KernelPackage,tpm-i2c-infineon)) |
| |
| |
| define KernelPackage/i6300esb-wdt |
| SUBMENU:=$(OTHER_MENU) |
| TITLE:=Intel 6300ESB Timer/Watchdog |
| DEPENDS:=@PCI_SUPPORT @!SMALL_FLASH |
| KCONFIG:=CONFIG_I6300ESB_WDT \ |
| CONFIG_WATCHDOG_CORE=y |
| FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/i6300esb.ko |
| AUTOLOAD:=$(call AutoLoad,50,i6300esb,1) |
| endef |
| |
| define KernelPackage/i6300esb-wdt/description |
| Kernel module for the watchdog timer built into the Intel |
| 6300ESB controller hub. Also used by QEMU/libvirt. |
| endef |
| |
| $(eval $(call KernelPackage,i6300esb-wdt)) |
| |
| |
| define KernelPackage/itco-wdt |
| SUBMENU:=$(OTHER_MENU) |
| TITLE:=Intel iTCO Watchdog Timer |
| KCONFIG:=CONFIG_ITCO_WDT \ |
| CONFIG_ITCO_VENDOR_SUPPORT=y |
| FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/iTCO_wdt.ko \ |
| $(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/iTCO_vendor_support.ko |
| AUTOLOAD:=$(call AutoLoad,50,iTCO_vendor_support iTCO_wdt,1) |
| endef |
| |
| define KernelPackage/itco-wdt/description |
| Kernel module for Intel iTCO Watchdog Timer |
| endef |
| |
| $(eval $(call KernelPackage,itco-wdt)) |
| |
| |
| define KernelPackage/mhi-bus |
| SUBMENU:=$(OTHER_MENU) |
| TITLE:=MHI bus |
| DEPENDS:=@(LINUX_5_15||LINUX_6_1||LINUX_6_6) |
| KCONFIG:=CONFIG_MHI_BUS \ |
| CONFIG_MHI_BUS_DEBUG=y |
| FILES:=$(LINUX_DIR)/drivers/bus/mhi/host/mhi.ko |
| AUTOLOAD:=$(call AutoProbe,mhi) |
| endef |
| |
| define KernelPackage/mhi-bus/description |
| Kernel module for the Qualcomm MHI bus. |
| endef |
| |
| $(eval $(call KernelPackage,mhi-bus)) |
| |
| define KernelPackage/mhi-pci-generic |
| SUBMENU:=$(OTHER_MENU) |
| TITLE:=MHI PCI controller driver |
| DEPENDS:=@PCI_SUPPORT +kmod-mhi-bus |
| KCONFIG:=CONFIG_MHI_BUS_PCI_GENERIC |
| FILES:=$(LINUX_DIR)/drivers/bus/mhi/host/mhi_pci_generic.ko |
| AUTOLOAD:=$(call AutoProbe,mhi_pci_generic) |
| endef |
| |
| define KernelPackage/mhi-pci-generic/description |
| Kernel module for the MHI PCI controller driver. |
| endef |
| |
| $(eval $(call KernelPackage,mhi-pci-generic)) |
| |
| define KernelPackage/hw_breakpoint |
| SUBMENU:=$(OTHER_MENU) |
| TITLE:=HW breakpoint/watchpoint sample |
| KCONFIG:= \ |
| CONFIG_HAVE_HW_BREAKPOINT |
| FILES:= \ |
| $(LINUX_DIR)/samples/hw_breakpoint/data_breakpoint.ko |
| endef |
| |
| define KernelPackage/hw_breakpoint/description |
| Kernel module of HW breakpoint/watchpoint sample |
| endef |
| |
| $(eval $(call KernelPackage,hw_breakpoint)) |
| |