| /* |
| * NXP 74HC153 - Dual 4-input multiplexer GPIO driver |
| * |
| * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org> |
| * Copyright (C) 2020 Mauri Sandberg <sandberg@mailfence.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * Example device tree definition: |
| * |
| * gpio-extender { |
| * compatible = "nxp,74hc153-gpio"; |
| * gpio-controller; |
| * #gpio-cells = <2>; |
| * |
| * // GPIOs used by this node |
| * gpio-s0 = <&gpio 9 GPIO_ACTIVE_HIGH>; |
| * gpio-s1 = <&gpio 11 GPIO_ACTIVE_HIGH>; |
| * gpio-1y = <&gpio 12 GPIO_ACTIVE_HIGH>; |
| * gpio-2y = <&gpio 14 GPIO_ACTIVE_HIGH>; |
| * }; |
| * |
| */ |
| |
| #include <linux/version.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/gpio.h> |
| #include <linux/slab.h> |
| #include <linux/platform_device.h> |
| #include <linux/of_gpio.h> |
| |
| #define NXP_74HC153_NUM_GPIOS 8 |
| #define NXP_74HC153_S0_MASK 0x1 |
| #define NXP_74HC153_S1_MASK 0x2 |
| #define NXP_74HC153_BANK_MASK 0x4 |
| |
| #define NXP_74HC153_DRIVER_NAME "nxp-74hc153" |
| |
| struct nxp_74hc153_config { |
| unsigned gpio_pin_s0; |
| unsigned gpio_pin_s1; |
| unsigned gpio_pin_1y; |
| unsigned gpio_pin_2y; |
| }; |
| |
| struct nxp_74hc153_chip { |
| struct device *parent; |
| struct gpio_chip gpio_chip; |
| struct mutex lock; |
| struct nxp_74hc153_config config; |
| }; |
| |
| static struct nxp_74hc153_chip *gpio_to_nxp(struct gpio_chip *gc) |
| { |
| return container_of(gc, struct nxp_74hc153_chip, gpio_chip); |
| } |
| |
| static int nxp_74hc153_direction_input(struct gpio_chip *gc, unsigned offset) |
| { |
| return 0; |
| } |
| |
| static int nxp_74hc153_direction_output(struct gpio_chip *gc, |
| unsigned offset, int val) |
| { |
| return -EINVAL; |
| } |
| |
| static int nxp_74hc153_get_value(struct gpio_chip *gc, unsigned offset) |
| { |
| struct nxp_74hc153_chip *nxp; |
| struct nxp_74hc153_platform_data *pdata; |
| unsigned s0; |
| unsigned s1; |
| unsigned pin; |
| int ret; |
| |
| nxp = gpio_to_nxp(gc); |
| pdata = nxp->parent->platform_data; |
| |
| s0 = !!(offset & NXP_74HC153_S0_MASK); |
| s1 = !!(offset & NXP_74HC153_S1_MASK); |
| pin = (offset & NXP_74HC153_BANK_MASK) ? nxp->config.gpio_pin_2y |
| : nxp->config.gpio_pin_1y; |
| |
| mutex_lock(&nxp->lock); |
| gpio_set_value(nxp->config.gpio_pin_s0, s0); |
| gpio_set_value(nxp->config.gpio_pin_s1, s1); |
| ret = gpio_get_value(pin); |
| mutex_unlock(&nxp->lock); |
| |
| return ret; |
| } |
| |
| static void nxp_74hc153_set_value(struct gpio_chip *gc, |
| unsigned offset, int val) |
| { |
| /* not supported */ |
| } |
| |
| static int nxp_74hc153_probe(struct platform_device *pdev) |
| { |
| struct device_node *np = pdev->dev.of_node; |
| struct nxp_74hc153_chip *nxp; |
| struct gpio_chip *gc; |
| int err; |
| unsigned gpio_s0; |
| unsigned gpio_s1; |
| unsigned gpio_1y; |
| unsigned gpio_2y; |
| |
| nxp = kzalloc(sizeof(struct nxp_74hc153_chip), GFP_KERNEL); |
| if (nxp == NULL) { |
| dev_err(&pdev->dev, "no memory for private data\n"); |
| return -ENOMEM; |
| } |
| |
| gpio_s0 = of_get_named_gpio(np, "gpio-s0", 0); |
| gpio_s1 = of_get_named_gpio(np, "gpio-s1", 0); |
| gpio_1y = of_get_named_gpio(np, "gpio-1y", 0); |
| gpio_2y = of_get_named_gpio(np, "gpio-2y", 0); |
| |
| if (!gpio_is_valid(gpio_s0) || !gpio_is_valid(gpio_s1) || |
| !gpio_is_valid(gpio_1y) || !gpio_is_valid(gpio_2y)) { |
| |
| dev_err(&pdev->dev, "control GPIO(s) are missing\n"); |
| err = -EINVAL; |
| goto err_free_nxp; |
| } else { |
| nxp->config.gpio_pin_s0 = gpio_s0; |
| nxp->config.gpio_pin_s1 = gpio_s1; |
| nxp->config.gpio_pin_1y = gpio_1y; |
| nxp->config.gpio_pin_2y = gpio_2y; |
| } |
| |
| // apply pin configuration |
| err = gpio_request(nxp->config.gpio_pin_s0, dev_name(&pdev->dev)); |
| if (err) { |
| dev_err(&pdev->dev, "unable to claim gpio %u, err=%d\n", |
| nxp->config.gpio_pin_s0, err); |
| goto err_free_nxp; |
| } |
| |
| err = gpio_request(nxp->config.gpio_pin_s1, dev_name(&pdev->dev)); |
| if (err) { |
| dev_err(&pdev->dev, "unable to claim gpio %u, err=%d\n", |
| nxp->config.gpio_pin_s1, err); |
| goto err_free_s0; |
| } |
| |
| err = gpio_request(nxp->config.gpio_pin_1y, dev_name(&pdev->dev)); |
| if (err) { |
| dev_err(&pdev->dev, "unable to claim gpio %u, err=%d\n", |
| nxp->config.gpio_pin_1y, err); |
| goto err_free_s1; |
| } |
| |
| err = gpio_request(nxp->config.gpio_pin_2y, dev_name(&pdev->dev)); |
| if (err) { |
| dev_err(&pdev->dev, "unable to claim gpio %u, err=%d\n", |
| nxp->config.gpio_pin_2y, err); |
| goto err_free_1y; |
| } |
| |
| err = gpio_direction_output(nxp->config.gpio_pin_s0, 0); |
| if (err) { |
| dev_err(&pdev->dev, |
| "unable to set direction of gpio %u, err=%d\n", |
| nxp->config.gpio_pin_s0, err); |
| goto err_free_2y; |
| } |
| |
| err = gpio_direction_output(nxp->config.gpio_pin_s1, 0); |
| if (err) { |
| dev_err(&pdev->dev, |
| "unable to set direction of gpio %u, err=%d\n", |
| nxp->config.gpio_pin_s1, err); |
| goto err_free_2y; |
| } |
| |
| err = gpio_direction_input(nxp->config.gpio_pin_1y); |
| if (err) { |
| dev_err(&pdev->dev, |
| "unable to set direction of gpio %u, err=%d\n", |
| nxp->config.gpio_pin_1y, err); |
| goto err_free_2y; |
| } |
| |
| err = gpio_direction_input(nxp->config.gpio_pin_2y); |
| if (err) { |
| dev_err(&pdev->dev, |
| "unable to set direction of gpio %u, err=%d\n", |
| nxp->config.gpio_pin_2y, err); |
| goto err_free_2y; |
| } |
| |
| nxp->parent = &pdev->dev; |
| mutex_init(&nxp->lock); |
| |
| gc = &nxp->gpio_chip; |
| |
| gc->direction_input = nxp_74hc153_direction_input; |
| gc->direction_output = nxp_74hc153_direction_output; |
| gc->get = nxp_74hc153_get_value; |
| gc->set = nxp_74hc153_set_value; |
| gc->can_sleep = 1; |
| |
| gc->base = -1; |
| gc->ngpio = NXP_74HC153_NUM_GPIOS; |
| gc->label = dev_name(nxp->parent); |
| gc->parent = nxp->parent; |
| gc->owner = THIS_MODULE; |
| gc->of_node = np; |
| |
| err = gpiochip_add(&nxp->gpio_chip); |
| if (err) { |
| dev_err(&pdev->dev, "unable to add gpio chip, err=%d\n", err); |
| goto err_free_2y; |
| } |
| |
| platform_set_drvdata(pdev, nxp); |
| return 0; |
| |
| err_free_2y: |
| gpio_free(nxp->config.gpio_pin_2y); |
| err_free_1y: |
| gpio_free(nxp->config.gpio_pin_1y); |
| err_free_s1: |
| gpio_free(nxp->config.gpio_pin_s1); |
| err_free_s0: |
| gpio_free(nxp->config.gpio_pin_s0); |
| err_free_nxp: |
| kfree(nxp); |
| return err; |
| } |
| |
| static int nxp_74hc153_remove(struct platform_device *pdev) |
| { |
| struct nxp_74hc153_chip *nxp = platform_get_drvdata(pdev); |
| |
| if (nxp) { |
| gpiochip_remove(&nxp->gpio_chip); |
| gpio_free(nxp->config.gpio_pin_2y); |
| gpio_free(nxp->config.gpio_pin_1y); |
| gpio_free(nxp->config.gpio_pin_s1); |
| gpio_free(nxp->config.gpio_pin_s0); |
| |
| kfree(nxp); |
| platform_set_drvdata(pdev, NULL); |
| } |
| |
| return 0; |
| } |
| |
| static struct of_device_id nxp_74hc153_id[] = { |
| { |
| .compatible = "nxp,74hc153-gpio", |
| .data = NULL, |
| }, { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, nxp_74hc153_id); |
| |
| static struct platform_driver nxp_74hc153_driver = { |
| .probe = nxp_74hc153_probe, |
| .remove = nxp_74hc153_remove, |
| .driver = { |
| .name = NXP_74HC153_DRIVER_NAME, |
| .owner = THIS_MODULE, |
| .of_match_table = nxp_74hc153_id, |
| }, |
| }; |
| |
| static int __init nxp_74hc153_init(void) |
| { |
| return platform_driver_register(&nxp_74hc153_driver); |
| } |
| subsys_initcall(nxp_74hc153_init); |
| |
| static void __exit nxp_74hc153_exit(void) |
| { |
| platform_driver_unregister(&nxp_74hc153_driver); |
| } |
| module_exit(nxp_74hc153_exit); |
| |
| MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>"); |
| MODULE_DESCRIPTION("GPIO expander driver for NXP 74HC153"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_ALIAS("platform:" NXP_74HC153_DRIVER_NAME); |