| // SPDX-License-Identifier: GPL-2.0-or-later | 
 | /* | 
 |  *  Fast Userspace Mutexes (which I call "Futexes!"). | 
 |  *  (C) Rusty Russell, IBM 2002 | 
 |  * | 
 |  *  Generalized futexes, futex requeueing, misc fixes by Ingo Molnar | 
 |  *  (C) Copyright 2003 Red Hat Inc, All Rights Reserved | 
 |  * | 
 |  *  Removed page pinning, fix privately mapped COW pages and other cleanups | 
 |  *  (C) Copyright 2003, 2004 Jamie Lokier | 
 |  * | 
 |  *  Robust futex support started by Ingo Molnar | 
 |  *  (C) Copyright 2006 Red Hat Inc, All Rights Reserved | 
 |  *  Thanks to Thomas Gleixner for suggestions, analysis and fixes. | 
 |  * | 
 |  *  PI-futex support started by Ingo Molnar and Thomas Gleixner | 
 |  *  Copyright (C) 2006 Red Hat, Inc., Ingo Molnar <mingo@redhat.com> | 
 |  *  Copyright (C) 2006 Timesys Corp., Thomas Gleixner <tglx@timesys.com> | 
 |  * | 
 |  *  PRIVATE futexes by Eric Dumazet | 
 |  *  Copyright (C) 2007 Eric Dumazet <dada1@cosmosbay.com> | 
 |  * | 
 |  *  Requeue-PI support by Darren Hart <dvhltc@us.ibm.com> | 
 |  *  Copyright (C) IBM Corporation, 2009 | 
 |  *  Thanks to Thomas Gleixner for conceptual design and careful reviews. | 
 |  * | 
 |  *  Thanks to Ben LaHaise for yelling "hashed waitqueues" loudly | 
 |  *  enough at me, Linus for the original (flawed) idea, Matthew | 
 |  *  Kirkwood for proof-of-concept implementation. | 
 |  * | 
 |  *  "The futexes are also cursed." | 
 |  *  "But they come in a choice of three flavours!" | 
 |  */ | 
 | #include <linux/compat.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/poll.h> | 
 | #include <linux/fs.h> | 
 | #include <linux/file.h> | 
 | #include <linux/jhash.h> | 
 | #include <linux/init.h> | 
 | #include <linux/futex.h> | 
 | #include <linux/mount.h> | 
 | #include <linux/pagemap.h> | 
 | #include <linux/syscalls.h> | 
 | #include <linux/signal.h> | 
 | #include <linux/export.h> | 
 | #include <linux/magic.h> | 
 | #include <linux/pid.h> | 
 | #include <linux/nsproxy.h> | 
 | #include <linux/ptrace.h> | 
 | #include <linux/sched/rt.h> | 
 | #include <linux/sched/wake_q.h> | 
 | #include <linux/sched/mm.h> | 
 | #include <linux/hugetlb.h> | 
 | #include <linux/freezer.h> | 
 | #include <linux/memblock.h> | 
 | #include <linux/fault-inject.h> | 
 | #include <linux/refcount.h> | 
 |  | 
 | #include <asm/futex.h> | 
 |  | 
 | #include "locking/rtmutex_common.h" | 
 | #include <trace/hooks/futex.h> | 
 |  | 
 | /* | 
 |  * READ this before attempting to hack on futexes! | 
 |  * | 
 |  * Basic futex operation and ordering guarantees | 
 |  * ============================================= | 
 |  * | 
 |  * The waiter reads the futex value in user space and calls | 
 |  * futex_wait(). This function computes the hash bucket and acquires | 
 |  * the hash bucket lock. After that it reads the futex user space value | 
 |  * again and verifies that the data has not changed. If it has not changed | 
 |  * it enqueues itself into the hash bucket, releases the hash bucket lock | 
 |  * and schedules. | 
 |  * | 
 |  * The waker side modifies the user space value of the futex and calls | 
 |  * futex_wake(). This function computes the hash bucket and acquires the | 
 |  * hash bucket lock. Then it looks for waiters on that futex in the hash | 
 |  * bucket and wakes them. | 
 |  * | 
 |  * In futex wake up scenarios where no tasks are blocked on a futex, taking | 
 |  * the hb spinlock can be avoided and simply return. In order for this | 
 |  * optimization to work, ordering guarantees must exist so that the waiter | 
 |  * being added to the list is acknowledged when the list is concurrently being | 
 |  * checked by the waker, avoiding scenarios like the following: | 
 |  * | 
 |  * CPU 0                               CPU 1 | 
 |  * val = *futex; | 
 |  * sys_futex(WAIT, futex, val); | 
 |  *   futex_wait(futex, val); | 
 |  *   uval = *futex; | 
 |  *                                     *futex = newval; | 
 |  *                                     sys_futex(WAKE, futex); | 
 |  *                                       futex_wake(futex); | 
 |  *                                       if (queue_empty()) | 
 |  *                                         return; | 
 |  *   if (uval == val) | 
 |  *      lock(hash_bucket(futex)); | 
 |  *      queue(); | 
 |  *     unlock(hash_bucket(futex)); | 
 |  *     schedule(); | 
 |  * | 
 |  * This would cause the waiter on CPU 0 to wait forever because it | 
 |  * missed the transition of the user space value from val to newval | 
 |  * and the waker did not find the waiter in the hash bucket queue. | 
 |  * | 
 |  * The correct serialization ensures that a waiter either observes | 
 |  * the changed user space value before blocking or is woken by a | 
 |  * concurrent waker: | 
 |  * | 
 |  * CPU 0                                 CPU 1 | 
 |  * val = *futex; | 
 |  * sys_futex(WAIT, futex, val); | 
 |  *   futex_wait(futex, val); | 
 |  * | 
 |  *   waiters++; (a) | 
 |  *   smp_mb(); (A) <-- paired with -. | 
 |  *                                  | | 
 |  *   lock(hash_bucket(futex));      | | 
 |  *                                  | | 
 |  *   uval = *futex;                 | | 
 |  *                                  |        *futex = newval; | 
 |  *                                  |        sys_futex(WAKE, futex); | 
 |  *                                  |          futex_wake(futex); | 
 |  *                                  | | 
 |  *                                  `--------> smp_mb(); (B) | 
 |  *   if (uval == val) | 
 |  *     queue(); | 
 |  *     unlock(hash_bucket(futex)); | 
 |  *     schedule();                         if (waiters) | 
 |  *                                           lock(hash_bucket(futex)); | 
 |  *   else                                    wake_waiters(futex); | 
 |  *     waiters--; (b)                        unlock(hash_bucket(futex)); | 
 |  * | 
 |  * Where (A) orders the waiters increment and the futex value read through | 
 |  * atomic operations (see hb_waiters_inc) and where (B) orders the write | 
 |  * to futex and the waiters read -- this is done by the barriers for both | 
 |  * shared and private futexes in get_futex_key_refs(). | 
 |  * | 
 |  * This yields the following case (where X:=waiters, Y:=futex): | 
 |  * | 
 |  *	X = Y = 0 | 
 |  * | 
 |  *	w[X]=1		w[Y]=1 | 
 |  *	MB		MB | 
 |  *	r[Y]=y		r[X]=x | 
 |  * | 
 |  * Which guarantees that x==0 && y==0 is impossible; which translates back into | 
 |  * the guarantee that we cannot both miss the futex variable change and the | 
 |  * enqueue. | 
 |  * | 
 |  * Note that a new waiter is accounted for in (a) even when it is possible that | 
 |  * the wait call can return error, in which case we backtrack from it in (b). | 
 |  * Refer to the comment in queue_lock(). | 
 |  * | 
 |  * Similarly, in order to account for waiters being requeued on another | 
 |  * address we always increment the waiters for the destination bucket before | 
 |  * acquiring the lock. It then decrements them again  after releasing it - | 
 |  * the code that actually moves the futex(es) between hash buckets (requeue_futex) | 
 |  * will do the additional required waiter count housekeeping. This is done for | 
 |  * double_lock_hb() and double_unlock_hb(), respectively. | 
 |  */ | 
 |  | 
 | #ifdef CONFIG_HAVE_FUTEX_CMPXCHG | 
 | #define futex_cmpxchg_enabled 1 | 
 | #else | 
 | static int  __read_mostly futex_cmpxchg_enabled; | 
 | #endif | 
 |  | 
 | /* | 
 |  * Futex flags used to encode options to functions and preserve them across | 
 |  * restarts. | 
 |  */ | 
 | #ifdef CONFIG_MMU | 
 | # define FLAGS_SHARED		0x01 | 
 | #else | 
 | /* | 
 |  * NOMMU does not have per process address space. Let the compiler optimize | 
 |  * code away. | 
 |  */ | 
 | # define FLAGS_SHARED		0x00 | 
 | #endif | 
 | #define FLAGS_CLOCKRT		0x02 | 
 | #define FLAGS_HAS_TIMEOUT	0x04 | 
 |  | 
 | /* | 
 |  * Priority Inheritance state: | 
 |  */ | 
 | struct futex_pi_state { | 
 | 	/* | 
 | 	 * list of 'owned' pi_state instances - these have to be | 
 | 	 * cleaned up in do_exit() if the task exits prematurely: | 
 | 	 */ | 
 | 	struct list_head list; | 
 |  | 
 | 	/* | 
 | 	 * The PI object: | 
 | 	 */ | 
 | 	struct rt_mutex pi_mutex; | 
 |  | 
 | 	struct task_struct *owner; | 
 | 	refcount_t refcount; | 
 |  | 
 | 	union futex_key key; | 
 | } __randomize_layout; | 
 |  | 
 | /** | 
 |  * struct futex_q - The hashed futex queue entry, one per waiting task | 
 |  * @list:		priority-sorted list of tasks waiting on this futex | 
 |  * @task:		the task waiting on the futex | 
 |  * @lock_ptr:		the hash bucket lock | 
 |  * @key:		the key the futex is hashed on | 
 |  * @pi_state:		optional priority inheritance state | 
 |  * @rt_waiter:		rt_waiter storage for use with requeue_pi | 
 |  * @requeue_pi_key:	the requeue_pi target futex key | 
 |  * @bitset:		bitset for the optional bitmasked wakeup | 
 |  * | 
 |  * We use this hashed waitqueue, instead of a normal wait_queue_entry_t, so | 
 |  * we can wake only the relevant ones (hashed queues may be shared). | 
 |  * | 
 |  * A futex_q has a woken state, just like tasks have TASK_RUNNING. | 
 |  * It is considered woken when plist_node_empty(&q->list) || q->lock_ptr == 0. | 
 |  * The order of wakeup is always to make the first condition true, then | 
 |  * the second. | 
 |  * | 
 |  * PI futexes are typically woken before they are removed from the hash list via | 
 |  * the rt_mutex code. See unqueue_me_pi(). | 
 |  */ | 
 | struct futex_q { | 
 | 	struct plist_node list; | 
 |  | 
 | 	struct task_struct *task; | 
 | 	spinlock_t *lock_ptr; | 
 | 	union futex_key key; | 
 | 	struct futex_pi_state *pi_state; | 
 | 	struct rt_mutex_waiter *rt_waiter; | 
 | 	union futex_key *requeue_pi_key; | 
 | 	u32 bitset; | 
 | } __randomize_layout; | 
 |  | 
 | static const struct futex_q futex_q_init = { | 
 | 	/* list gets initialized in queue_me()*/ | 
 | 	.key = FUTEX_KEY_INIT, | 
 | 	.bitset = FUTEX_BITSET_MATCH_ANY | 
 | }; | 
 |  | 
 | /* | 
 |  * Hash buckets are shared by all the futex_keys that hash to the same | 
 |  * location.  Each key may have multiple futex_q structures, one for each task | 
 |  * waiting on a futex. | 
 |  */ | 
 | struct futex_hash_bucket { | 
 | 	atomic_t waiters; | 
 | 	spinlock_t lock; | 
 | 	struct plist_head chain; | 
 | } ____cacheline_aligned_in_smp; | 
 |  | 
 | /* | 
 |  * The base of the bucket array and its size are always used together | 
 |  * (after initialization only in hash_futex()), so ensure that they | 
 |  * reside in the same cacheline. | 
 |  */ | 
 | static struct { | 
 | 	struct futex_hash_bucket *queues; | 
 | 	unsigned long            hashsize; | 
 | } __futex_data __read_mostly __aligned(2*sizeof(long)); | 
 | #define futex_queues   (__futex_data.queues) | 
 | #define futex_hashsize (__futex_data.hashsize) | 
 |  | 
 |  | 
 | /* | 
 |  * Fault injections for futexes. | 
 |  */ | 
 | #ifdef CONFIG_FAIL_FUTEX | 
 |  | 
 | static struct { | 
 | 	struct fault_attr attr; | 
 |  | 
 | 	bool ignore_private; | 
 | } fail_futex = { | 
 | 	.attr = FAULT_ATTR_INITIALIZER, | 
 | 	.ignore_private = false, | 
 | }; | 
 |  | 
 | static int __init setup_fail_futex(char *str) | 
 | { | 
 | 	return setup_fault_attr(&fail_futex.attr, str); | 
 | } | 
 | __setup("fail_futex=", setup_fail_futex); | 
 |  | 
 | static bool should_fail_futex(bool fshared) | 
 | { | 
 | 	if (fail_futex.ignore_private && !fshared) | 
 | 		return false; | 
 |  | 
 | 	return should_fail(&fail_futex.attr, 1); | 
 | } | 
 |  | 
 | #ifdef CONFIG_FAULT_INJECTION_DEBUG_FS | 
 |  | 
 | static int __init fail_futex_debugfs(void) | 
 | { | 
 | 	umode_t mode = S_IFREG | S_IRUSR | S_IWUSR; | 
 | 	struct dentry *dir; | 
 |  | 
 | 	dir = fault_create_debugfs_attr("fail_futex", NULL, | 
 | 					&fail_futex.attr); | 
 | 	if (IS_ERR(dir)) | 
 | 		return PTR_ERR(dir); | 
 |  | 
 | 	debugfs_create_bool("ignore-private", mode, dir, | 
 | 			    &fail_futex.ignore_private); | 
 | 	return 0; | 
 | } | 
 |  | 
 | late_initcall(fail_futex_debugfs); | 
 |  | 
 | #endif /* CONFIG_FAULT_INJECTION_DEBUG_FS */ | 
 |  | 
 | #else | 
 | static inline bool should_fail_futex(bool fshared) | 
 | { | 
 | 	return false; | 
 | } | 
 | #endif /* CONFIG_FAIL_FUTEX */ | 
 |  | 
 | #ifdef CONFIG_COMPAT | 
 | static void compat_exit_robust_list(struct task_struct *curr); | 
 | #else | 
 | static inline void compat_exit_robust_list(struct task_struct *curr) { } | 
 | #endif | 
 |  | 
 | static inline void futex_get_mm(union futex_key *key) | 
 | { | 
 | 	mmgrab(key->private.mm); | 
 | 	/* | 
 | 	 * Ensure futex_get_mm() implies a full barrier such that | 
 | 	 * get_futex_key() implies a full barrier. This is relied upon | 
 | 	 * as smp_mb(); (B), see the ordering comment above. | 
 | 	 */ | 
 | 	smp_mb__after_atomic(); | 
 | } | 
 |  | 
 | /* | 
 |  * Reflects a new waiter being added to the waitqueue. | 
 |  */ | 
 | static inline void hb_waiters_inc(struct futex_hash_bucket *hb) | 
 | { | 
 | #ifdef CONFIG_SMP | 
 | 	atomic_inc(&hb->waiters); | 
 | 	/* | 
 | 	 * Full barrier (A), see the ordering comment above. | 
 | 	 */ | 
 | 	smp_mb__after_atomic(); | 
 | #endif | 
 | } | 
 |  | 
 | /* | 
 |  * Reflects a waiter being removed from the waitqueue by wakeup | 
 |  * paths. | 
 |  */ | 
 | static inline void hb_waiters_dec(struct futex_hash_bucket *hb) | 
 | { | 
 | #ifdef CONFIG_SMP | 
 | 	atomic_dec(&hb->waiters); | 
 | #endif | 
 | } | 
 |  | 
 | static inline int hb_waiters_pending(struct futex_hash_bucket *hb) | 
 | { | 
 | #ifdef CONFIG_SMP | 
 | 	return atomic_read(&hb->waiters); | 
 | #else | 
 | 	return 1; | 
 | #endif | 
 | } | 
 |  | 
 | /** | 
 |  * hash_futex - Return the hash bucket in the global hash | 
 |  * @key:	Pointer to the futex key for which the hash is calculated | 
 |  * | 
 |  * We hash on the keys returned from get_futex_key (see below) and return the | 
 |  * corresponding hash bucket in the global hash. | 
 |  */ | 
 | static struct futex_hash_bucket *hash_futex(union futex_key *key) | 
 | { | 
 | 	u32 hash = jhash2((u32 *)key, offsetof(typeof(*key), both.offset) / 4, | 
 | 			  key->both.offset); | 
 |  | 
 | 	return &futex_queues[hash & (futex_hashsize - 1)]; | 
 | } | 
 |  | 
 |  | 
 | /** | 
 |  * match_futex - Check whether two futex keys are equal | 
 |  * @key1:	Pointer to key1 | 
 |  * @key2:	Pointer to key2 | 
 |  * | 
 |  * Return 1 if two futex_keys are equal, 0 otherwise. | 
 |  */ | 
 | static inline int match_futex(union futex_key *key1, union futex_key *key2) | 
 | { | 
 | 	return (key1 && key2 | 
 | 		&& key1->both.word == key2->both.word | 
 | 		&& key1->both.ptr == key2->both.ptr | 
 | 		&& key1->both.offset == key2->both.offset); | 
 | } | 
 |  | 
 | /* | 
 |  * Take a reference to the resource addressed by a key. | 
 |  * Can be called while holding spinlocks. | 
 |  * | 
 |  */ | 
 | static void get_futex_key_refs(union futex_key *key) | 
 | { | 
 | 	if (!key->both.ptr) | 
 | 		return; | 
 |  | 
 | 	/* | 
 | 	 * On MMU less systems futexes are always "private" as there is no per | 
 | 	 * process address space. We need the smp wmb nevertheless - yes, | 
 | 	 * arch/blackfin has MMU less SMP ... | 
 | 	 */ | 
 | 	if (!IS_ENABLED(CONFIG_MMU)) { | 
 | 		smp_mb(); /* explicit smp_mb(); (B) */ | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	switch (key->both.offset & (FUT_OFF_INODE|FUT_OFF_MMSHARED)) { | 
 | 	case FUT_OFF_INODE: | 
 | 		smp_mb();		/* explicit smp_mb(); (B) */ | 
 | 		break; | 
 | 	case FUT_OFF_MMSHARED: | 
 | 		futex_get_mm(key); /* implies smp_mb(); (B) */ | 
 | 		break; | 
 | 	default: | 
 | 		/* | 
 | 		 * Private futexes do not hold reference on an inode or | 
 | 		 * mm, therefore the only purpose of calling get_futex_key_refs | 
 | 		 * is because we need the barrier for the lockless waiter check. | 
 | 		 */ | 
 | 		smp_mb(); /* explicit smp_mb(); (B) */ | 
 | 	} | 
 | } | 
 |  | 
 | /* | 
 |  * Drop a reference to the resource addressed by a key. | 
 |  * The hash bucket spinlock must not be held. This is | 
 |  * a no-op for private futexes, see comment in the get | 
 |  * counterpart. | 
 |  */ | 
 | static void drop_futex_key_refs(union futex_key *key) | 
 | { | 
 | 	if (!key->both.ptr) { | 
 | 		/* If we're here then we tried to put a key we failed to get */ | 
 | 		WARN_ON_ONCE(1); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	if (!IS_ENABLED(CONFIG_MMU)) | 
 | 		return; | 
 |  | 
 | 	switch (key->both.offset & (FUT_OFF_INODE|FUT_OFF_MMSHARED)) { | 
 | 	case FUT_OFF_INODE: | 
 | 		break; | 
 | 	case FUT_OFF_MMSHARED: | 
 | 		mmdrop(key->private.mm); | 
 | 		break; | 
 | 	} | 
 | } | 
 |  | 
 | enum futex_access { | 
 | 	FUTEX_READ, | 
 | 	FUTEX_WRITE | 
 | }; | 
 |  | 
 | /** | 
 |  * futex_setup_timer - set up the sleeping hrtimer. | 
 |  * @time:	ptr to the given timeout value | 
 |  * @timeout:	the hrtimer_sleeper structure to be set up | 
 |  * @flags:	futex flags | 
 |  * @range_ns:	optional range in ns | 
 |  * | 
 |  * Return: Initialized hrtimer_sleeper structure or NULL if no timeout | 
 |  *	   value given | 
 |  */ | 
 | static inline struct hrtimer_sleeper * | 
 | futex_setup_timer(ktime_t *time, struct hrtimer_sleeper *timeout, | 
 | 		  int flags, u64 range_ns) | 
 | { | 
 | 	if (!time) | 
 | 		return NULL; | 
 |  | 
 | 	hrtimer_init_sleeper_on_stack(timeout, (flags & FLAGS_CLOCKRT) ? | 
 | 				      CLOCK_REALTIME : CLOCK_MONOTONIC, | 
 | 				      HRTIMER_MODE_ABS); | 
 | 	/* | 
 | 	 * If range_ns is 0, calling hrtimer_set_expires_range_ns() is | 
 | 	 * effectively the same as calling hrtimer_set_expires(). | 
 | 	 */ | 
 | 	hrtimer_set_expires_range_ns(&timeout->timer, *time, range_ns); | 
 |  | 
 | 	return timeout; | 
 | } | 
 |  | 
 | /* | 
 |  * Generate a machine wide unique identifier for this inode. | 
 |  * | 
 |  * This relies on u64 not wrapping in the life-time of the machine; which with | 
 |  * 1ns resolution means almost 585 years. | 
 |  * | 
 |  * This further relies on the fact that a well formed program will not unmap | 
 |  * the file while it has a (shared) futex waiting on it. This mapping will have | 
 |  * a file reference which pins the mount and inode. | 
 |  * | 
 |  * If for some reason an inode gets evicted and read back in again, it will get | 
 |  * a new sequence number and will _NOT_ match, even though it is the exact same | 
 |  * file. | 
 |  * | 
 |  * It is important that match_futex() will never have a false-positive, esp. | 
 |  * for PI futexes that can mess up the state. The above argues that false-negatives | 
 |  * are only possible for malformed programs. | 
 |  */ | 
 | static u64 get_inode_sequence_number(struct inode *inode) | 
 | { | 
 | 	static atomic64_t i_seq; | 
 | 	u64 old; | 
 |  | 
 | 	/* Does the inode already have a sequence number? */ | 
 | 	old = atomic64_read(&inode->i_sequence); | 
 | 	if (likely(old)) | 
 | 		return old; | 
 |  | 
 | 	for (;;) { | 
 | 		u64 new = atomic64_add_return(1, &i_seq); | 
 | 		if (WARN_ON_ONCE(!new)) | 
 | 			continue; | 
 |  | 
 | 		old = atomic64_cmpxchg_relaxed(&inode->i_sequence, 0, new); | 
 | 		if (old) | 
 | 			return old; | 
 | 		return new; | 
 | 	} | 
 | } | 
 |  | 
 | /** | 
 |  * get_futex_key() - Get parameters which are the keys for a futex | 
 |  * @uaddr:	virtual address of the futex | 
 |  * @fshared:	0 for a PROCESS_PRIVATE futex, 1 for PROCESS_SHARED | 
 |  * @key:	address where result is stored. | 
 |  * @rw:		mapping needs to be read/write (values: FUTEX_READ, | 
 |  *              FUTEX_WRITE) | 
 |  * | 
 |  * Return: a negative error code or 0 | 
 |  * | 
 |  * The key words are stored in @key on success. | 
 |  * | 
 |  * For shared mappings (when @fshared), the key is: | 
 |  *   ( inode->i_sequence, page->index, offset_within_page ) | 
 |  * [ also see get_inode_sequence_number() ] | 
 |  * | 
 |  * For private mappings (or when !@fshared), the key is: | 
 |  *   ( current->mm, address, 0 ) | 
 |  * | 
 |  * This allows (cross process, where applicable) identification of the futex | 
 |  * without keeping the page pinned for the duration of the FUTEX_WAIT. | 
 |  * | 
 |  * lock_page() might sleep, the caller should not hold a spinlock. | 
 |  */ | 
 | static int | 
 | get_futex_key(u32 __user *uaddr, int fshared, union futex_key *key, enum futex_access rw) | 
 | { | 
 | 	unsigned long address = (unsigned long)uaddr; | 
 | 	struct mm_struct *mm = current->mm; | 
 | 	struct page *page, *tail; | 
 | 	struct address_space *mapping; | 
 | 	int err, ro = 0; | 
 |  | 
 | 	/* | 
 | 	 * The futex address must be "naturally" aligned. | 
 | 	 */ | 
 | 	key->both.offset = address % PAGE_SIZE; | 
 | 	if (unlikely((address % sizeof(u32)) != 0)) | 
 | 		return -EINVAL; | 
 | 	address -= key->both.offset; | 
 |  | 
 | 	if (unlikely(!access_ok(uaddr, sizeof(u32)))) | 
 | 		return -EFAULT; | 
 |  | 
 | 	if (unlikely(should_fail_futex(fshared))) | 
 | 		return -EFAULT; | 
 |  | 
 | 	/* | 
 | 	 * PROCESS_PRIVATE futexes are fast. | 
 | 	 * As the mm cannot disappear under us and the 'key' only needs | 
 | 	 * virtual address, we dont even have to find the underlying vma. | 
 | 	 * Note : We do have to check 'uaddr' is a valid user address, | 
 | 	 *        but access_ok() should be faster than find_vma() | 
 | 	 */ | 
 | 	if (!fshared) { | 
 | 		key->private.mm = mm; | 
 | 		key->private.address = address; | 
 | 		get_futex_key_refs(key);  /* implies smp_mb(); (B) */ | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | again: | 
 | 	/* Ignore any VERIFY_READ mapping (futex common case) */ | 
 | 	if (unlikely(should_fail_futex(fshared))) | 
 | 		return -EFAULT; | 
 |  | 
 | 	err = get_user_pages_fast(address, 1, FOLL_WRITE, &page); | 
 | 	/* | 
 | 	 * If write access is not required (eg. FUTEX_WAIT), try | 
 | 	 * and get read-only access. | 
 | 	 */ | 
 | 	if (err == -EFAULT && rw == FUTEX_READ) { | 
 | 		err = get_user_pages_fast(address, 1, 0, &page); | 
 | 		ro = 1; | 
 | 	} | 
 | 	if (err < 0) | 
 | 		return err; | 
 | 	else | 
 | 		err = 0; | 
 |  | 
 | 	/* | 
 | 	 * The treatment of mapping from this point on is critical. The page | 
 | 	 * lock protects many things but in this context the page lock | 
 | 	 * stabilizes mapping, prevents inode freeing in the shared | 
 | 	 * file-backed region case and guards against movement to swap cache. | 
 | 	 * | 
 | 	 * Strictly speaking the page lock is not needed in all cases being | 
 | 	 * considered here and page lock forces unnecessarily serialization | 
 | 	 * From this point on, mapping will be re-verified if necessary and | 
 | 	 * page lock will be acquired only if it is unavoidable | 
 | 	 * | 
 | 	 * Mapping checks require the head page for any compound page so the | 
 | 	 * head page and mapping is looked up now. For anonymous pages, it | 
 | 	 * does not matter if the page splits in the future as the key is | 
 | 	 * based on the address. For filesystem-backed pages, the tail is | 
 | 	 * required as the index of the page determines the key. For | 
 | 	 * base pages, there is no tail page and tail == page. | 
 | 	 */ | 
 | 	tail = page; | 
 | 	page = compound_head(page); | 
 | 	mapping = READ_ONCE(page->mapping); | 
 |  | 
 | 	/* | 
 | 	 * If page->mapping is NULL, then it cannot be a PageAnon | 
 | 	 * page; but it might be the ZERO_PAGE or in the gate area or | 
 | 	 * in a special mapping (all cases which we are happy to fail); | 
 | 	 * or it may have been a good file page when get_user_pages_fast | 
 | 	 * found it, but truncated or holepunched or subjected to | 
 | 	 * invalidate_complete_page2 before we got the page lock (also | 
 | 	 * cases which we are happy to fail).  And we hold a reference, | 
 | 	 * so refcount care in invalidate_complete_page's remove_mapping | 
 | 	 * prevents drop_caches from setting mapping to NULL beneath us. | 
 | 	 * | 
 | 	 * The case we do have to guard against is when memory pressure made | 
 | 	 * shmem_writepage move it from filecache to swapcache beneath us: | 
 | 	 * an unlikely race, but we do need to retry for page->mapping. | 
 | 	 */ | 
 | 	if (unlikely(!mapping)) { | 
 | 		int shmem_swizzled; | 
 |  | 
 | 		/* | 
 | 		 * Page lock is required to identify which special case above | 
 | 		 * applies. If this is really a shmem page then the page lock | 
 | 		 * will prevent unexpected transitions. | 
 | 		 */ | 
 | 		lock_page(page); | 
 | 		shmem_swizzled = PageSwapCache(page) || page->mapping; | 
 | 		unlock_page(page); | 
 | 		put_page(page); | 
 |  | 
 | 		if (shmem_swizzled) | 
 | 			goto again; | 
 |  | 
 | 		return -EFAULT; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Private mappings are handled in a simple way. | 
 | 	 * | 
 | 	 * If the futex key is stored on an anonymous page, then the associated | 
 | 	 * object is the mm which is implicitly pinned by the calling process. | 
 | 	 * | 
 | 	 * NOTE: When userspace waits on a MAP_SHARED mapping, even if | 
 | 	 * it's a read-only handle, it's expected that futexes attach to | 
 | 	 * the object not the particular process. | 
 | 	 */ | 
 | 	if (PageAnon(page)) { | 
 | 		/* | 
 | 		 * A RO anonymous page will never change and thus doesn't make | 
 | 		 * sense for futex operations. | 
 | 		 */ | 
 | 		if (unlikely(should_fail_futex(fshared)) || ro) { | 
 | 			err = -EFAULT; | 
 | 			goto out; | 
 | 		} | 
 |  | 
 | 		key->both.offset |= FUT_OFF_MMSHARED; /* ref taken on mm */ | 
 | 		key->private.mm = mm; | 
 | 		key->private.address = address; | 
 |  | 
 | 	} else { | 
 | 		struct inode *inode; | 
 |  | 
 | 		/* | 
 | 		 * The associated futex object in this case is the inode and | 
 | 		 * the page->mapping must be traversed. Ordinarily this should | 
 | 		 * be stabilised under page lock but it's not strictly | 
 | 		 * necessary in this case as we just want to pin the inode, not | 
 | 		 * update the radix tree or anything like that. | 
 | 		 * | 
 | 		 * The RCU read lock is taken as the inode is finally freed | 
 | 		 * under RCU. If the mapping still matches expectations then the | 
 | 		 * mapping->host can be safely accessed as being a valid inode. | 
 | 		 */ | 
 | 		rcu_read_lock(); | 
 |  | 
 | 		if (READ_ONCE(page->mapping) != mapping) { | 
 | 			rcu_read_unlock(); | 
 | 			put_page(page); | 
 |  | 
 | 			goto again; | 
 | 		} | 
 |  | 
 | 		inode = READ_ONCE(mapping->host); | 
 | 		if (!inode) { | 
 | 			rcu_read_unlock(); | 
 | 			put_page(page); | 
 |  | 
 | 			goto again; | 
 | 		} | 
 |  | 
 | 		key->both.offset |= FUT_OFF_INODE; /* inode-based key */ | 
 | 		key->shared.i_seq = get_inode_sequence_number(inode); | 
 | 		key->shared.pgoff = page_to_pgoff(tail); | 
 | 		rcu_read_unlock(); | 
 | 	} | 
 |  | 
 | 	get_futex_key_refs(key); /* implies smp_mb(); (B) */ | 
 |  | 
 | out: | 
 | 	put_page(page); | 
 | 	return err; | 
 | } | 
 |  | 
 | static inline void put_futex_key(union futex_key *key) | 
 | { | 
 | 	drop_futex_key_refs(key); | 
 | } | 
 |  | 
 | /** | 
 |  * fault_in_user_writeable() - Fault in user address and verify RW access | 
 |  * @uaddr:	pointer to faulting user space address | 
 |  * | 
 |  * Slow path to fixup the fault we just took in the atomic write | 
 |  * access to @uaddr. | 
 |  * | 
 |  * We have no generic implementation of a non-destructive write to the | 
 |  * user address. We know that we faulted in the atomic pagefault | 
 |  * disabled section so we can as well avoid the #PF overhead by | 
 |  * calling get_user_pages() right away. | 
 |  */ | 
 | static int fault_in_user_writeable(u32 __user *uaddr) | 
 | { | 
 | 	struct mm_struct *mm = current->mm; | 
 | 	int ret; | 
 |  | 
 | 	down_read(&mm->mmap_sem); | 
 | 	ret = fixup_user_fault(current, mm, (unsigned long)uaddr, | 
 | 			       FAULT_FLAG_WRITE, NULL); | 
 | 	up_read(&mm->mmap_sem); | 
 |  | 
 | 	return ret < 0 ? ret : 0; | 
 | } | 
 |  | 
 | /** | 
 |  * futex_top_waiter() - Return the highest priority waiter on a futex | 
 |  * @hb:		the hash bucket the futex_q's reside in | 
 |  * @key:	the futex key (to distinguish it from other futex futex_q's) | 
 |  * | 
 |  * Must be called with the hb lock held. | 
 |  */ | 
 | static struct futex_q *futex_top_waiter(struct futex_hash_bucket *hb, | 
 | 					union futex_key *key) | 
 | { | 
 | 	struct futex_q *this; | 
 |  | 
 | 	plist_for_each_entry(this, &hb->chain, list) { | 
 | 		if (match_futex(&this->key, key)) | 
 | 			return this; | 
 | 	} | 
 | 	return NULL; | 
 | } | 
 |  | 
 | static int cmpxchg_futex_value_locked(u32 *curval, u32 __user *uaddr, | 
 | 				      u32 uval, u32 newval) | 
 | { | 
 | 	int ret; | 
 |  | 
 | 	pagefault_disable(); | 
 | 	ret = futex_atomic_cmpxchg_inatomic(curval, uaddr, uval, newval); | 
 | 	pagefault_enable(); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int get_futex_value_locked(u32 *dest, u32 __user *from) | 
 | { | 
 | 	int ret; | 
 |  | 
 | 	pagefault_disable(); | 
 | 	ret = __get_user(*dest, from); | 
 | 	pagefault_enable(); | 
 |  | 
 | 	return ret ? -EFAULT : 0; | 
 | } | 
 |  | 
 |  | 
 | /* | 
 |  * PI code: | 
 |  */ | 
 | static int refill_pi_state_cache(void) | 
 | { | 
 | 	struct futex_pi_state *pi_state; | 
 |  | 
 | 	if (likely(current->pi_state_cache)) | 
 | 		return 0; | 
 |  | 
 | 	pi_state = kzalloc(sizeof(*pi_state), GFP_KERNEL); | 
 |  | 
 | 	if (!pi_state) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	INIT_LIST_HEAD(&pi_state->list); | 
 | 	/* pi_mutex gets initialized later */ | 
 | 	pi_state->owner = NULL; | 
 | 	refcount_set(&pi_state->refcount, 1); | 
 | 	pi_state->key = FUTEX_KEY_INIT; | 
 |  | 
 | 	current->pi_state_cache = pi_state; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static struct futex_pi_state *alloc_pi_state(void) | 
 | { | 
 | 	struct futex_pi_state *pi_state = current->pi_state_cache; | 
 |  | 
 | 	WARN_ON(!pi_state); | 
 | 	current->pi_state_cache = NULL; | 
 |  | 
 | 	return pi_state; | 
 | } | 
 |  | 
 | static void pi_state_update_owner(struct futex_pi_state *pi_state, | 
 | 				  struct task_struct *new_owner) | 
 | { | 
 | 	struct task_struct *old_owner = pi_state->owner; | 
 |  | 
 | 	lockdep_assert_held(&pi_state->pi_mutex.wait_lock); | 
 |  | 
 | 	if (old_owner) { | 
 | 		raw_spin_lock(&old_owner->pi_lock); | 
 | 		WARN_ON(list_empty(&pi_state->list)); | 
 | 		list_del_init(&pi_state->list); | 
 | 		raw_spin_unlock(&old_owner->pi_lock); | 
 | 	} | 
 |  | 
 | 	if (new_owner) { | 
 | 		raw_spin_lock(&new_owner->pi_lock); | 
 | 		WARN_ON(!list_empty(&pi_state->list)); | 
 | 		list_add(&pi_state->list, &new_owner->pi_state_list); | 
 | 		pi_state->owner = new_owner; | 
 | 		raw_spin_unlock(&new_owner->pi_lock); | 
 | 	} | 
 | } | 
 |  | 
 | static void get_pi_state(struct futex_pi_state *pi_state) | 
 | { | 
 | 	WARN_ON_ONCE(!refcount_inc_not_zero(&pi_state->refcount)); | 
 | } | 
 |  | 
 | /* | 
 |  * Drops a reference to the pi_state object and frees or caches it | 
 |  * when the last reference is gone. | 
 |  */ | 
 | static void put_pi_state(struct futex_pi_state *pi_state) | 
 | { | 
 | 	if (!pi_state) | 
 | 		return; | 
 |  | 
 | 	if (!refcount_dec_and_test(&pi_state->refcount)) | 
 | 		return; | 
 |  | 
 | 	/* | 
 | 	 * If pi_state->owner is NULL, the owner is most probably dying | 
 | 	 * and has cleaned up the pi_state already | 
 | 	 */ | 
 | 	if (pi_state->owner) { | 
 | 		unsigned long flags; | 
 |  | 
 | 		raw_spin_lock_irqsave(&pi_state->pi_mutex.wait_lock, flags); | 
 | 		pi_state_update_owner(pi_state, NULL); | 
 | 		rt_mutex_proxy_unlock(&pi_state->pi_mutex); | 
 | 		raw_spin_unlock_irqrestore(&pi_state->pi_mutex.wait_lock, flags); | 
 | 	} | 
 |  | 
 | 	if (current->pi_state_cache) { | 
 | 		kfree(pi_state); | 
 | 	} else { | 
 | 		/* | 
 | 		 * pi_state->list is already empty. | 
 | 		 * clear pi_state->owner. | 
 | 		 * refcount is at 0 - put it back to 1. | 
 | 		 */ | 
 | 		pi_state->owner = NULL; | 
 | 		refcount_set(&pi_state->refcount, 1); | 
 | 		current->pi_state_cache = pi_state; | 
 | 	} | 
 | } | 
 |  | 
 | #ifdef CONFIG_FUTEX_PI | 
 |  | 
 | /* | 
 |  * This task is holding PI mutexes at exit time => bad. | 
 |  * Kernel cleans up PI-state, but userspace is likely hosed. | 
 |  * (Robust-futex cleanup is separate and might save the day for userspace.) | 
 |  */ | 
 | static void exit_pi_state_list(struct task_struct *curr) | 
 | { | 
 | 	struct list_head *next, *head = &curr->pi_state_list; | 
 | 	struct futex_pi_state *pi_state; | 
 | 	struct futex_hash_bucket *hb; | 
 | 	union futex_key key = FUTEX_KEY_INIT; | 
 |  | 
 | 	if (!futex_cmpxchg_enabled) | 
 | 		return; | 
 | 	/* | 
 | 	 * We are a ZOMBIE and nobody can enqueue itself on | 
 | 	 * pi_state_list anymore, but we have to be careful | 
 | 	 * versus waiters unqueueing themselves: | 
 | 	 */ | 
 | 	raw_spin_lock_irq(&curr->pi_lock); | 
 | 	while (!list_empty(head)) { | 
 | 		next = head->next; | 
 | 		pi_state = list_entry(next, struct futex_pi_state, list); | 
 | 		key = pi_state->key; | 
 | 		hb = hash_futex(&key); | 
 |  | 
 | 		/* | 
 | 		 * We can race against put_pi_state() removing itself from the | 
 | 		 * list (a waiter going away). put_pi_state() will first | 
 | 		 * decrement the reference count and then modify the list, so | 
 | 		 * its possible to see the list entry but fail this reference | 
 | 		 * acquire. | 
 | 		 * | 
 | 		 * In that case; drop the locks to let put_pi_state() make | 
 | 		 * progress and retry the loop. | 
 | 		 */ | 
 | 		if (!refcount_inc_not_zero(&pi_state->refcount)) { | 
 | 			raw_spin_unlock_irq(&curr->pi_lock); | 
 | 			cpu_relax(); | 
 | 			raw_spin_lock_irq(&curr->pi_lock); | 
 | 			continue; | 
 | 		} | 
 | 		raw_spin_unlock_irq(&curr->pi_lock); | 
 |  | 
 | 		spin_lock(&hb->lock); | 
 | 		raw_spin_lock_irq(&pi_state->pi_mutex.wait_lock); | 
 | 		raw_spin_lock(&curr->pi_lock); | 
 | 		/* | 
 | 		 * We dropped the pi-lock, so re-check whether this | 
 | 		 * task still owns the PI-state: | 
 | 		 */ | 
 | 		if (head->next != next) { | 
 | 			/* retain curr->pi_lock for the loop invariant */ | 
 | 			raw_spin_unlock(&pi_state->pi_mutex.wait_lock); | 
 | 			spin_unlock(&hb->lock); | 
 | 			put_pi_state(pi_state); | 
 | 			continue; | 
 | 		} | 
 |  | 
 | 		WARN_ON(pi_state->owner != curr); | 
 | 		WARN_ON(list_empty(&pi_state->list)); | 
 | 		list_del_init(&pi_state->list); | 
 | 		pi_state->owner = NULL; | 
 |  | 
 | 		raw_spin_unlock(&curr->pi_lock); | 
 | 		raw_spin_unlock_irq(&pi_state->pi_mutex.wait_lock); | 
 | 		spin_unlock(&hb->lock); | 
 |  | 
 | 		rt_mutex_futex_unlock(&pi_state->pi_mutex); | 
 | 		put_pi_state(pi_state); | 
 |  | 
 | 		raw_spin_lock_irq(&curr->pi_lock); | 
 | 	} | 
 | 	raw_spin_unlock_irq(&curr->pi_lock); | 
 | } | 
 | #else | 
 | static inline void exit_pi_state_list(struct task_struct *curr) { } | 
 | #endif | 
 |  | 
 | /* | 
 |  * We need to check the following states: | 
 |  * | 
 |  *      Waiter | pi_state | pi->owner | uTID      | uODIED | ? | 
 |  * | 
 |  * [1]  NULL   | ---      | ---       | 0         | 0/1    | Valid | 
 |  * [2]  NULL   | ---      | ---       | >0        | 0/1    | Valid | 
 |  * | 
 |  * [3]  Found  | NULL     | --        | Any       | 0/1    | Invalid | 
 |  * | 
 |  * [4]  Found  | Found    | NULL      | 0         | 1      | Valid | 
 |  * [5]  Found  | Found    | NULL      | >0        | 1      | Invalid | 
 |  * | 
 |  * [6]  Found  | Found    | task      | 0         | 1      | Valid | 
 |  * | 
 |  * [7]  Found  | Found    | NULL      | Any       | 0      | Invalid | 
 |  * | 
 |  * [8]  Found  | Found    | task      | ==taskTID | 0/1    | Valid | 
 |  * [9]  Found  | Found    | task      | 0         | 0      | Invalid | 
 |  * [10] Found  | Found    | task      | !=taskTID | 0/1    | Invalid | 
 |  * | 
 |  * [1]	Indicates that the kernel can acquire the futex atomically. We | 
 |  *	came came here due to a stale FUTEX_WAITERS/FUTEX_OWNER_DIED bit. | 
 |  * | 
 |  * [2]	Valid, if TID does not belong to a kernel thread. If no matching | 
 |  *      thread is found then it indicates that the owner TID has died. | 
 |  * | 
 |  * [3]	Invalid. The waiter is queued on a non PI futex | 
 |  * | 
 |  * [4]	Valid state after exit_robust_list(), which sets the user space | 
 |  *	value to FUTEX_WAITERS | FUTEX_OWNER_DIED. | 
 |  * | 
 |  * [5]	The user space value got manipulated between exit_robust_list() | 
 |  *	and exit_pi_state_list() | 
 |  * | 
 |  * [6]	Valid state after exit_pi_state_list() which sets the new owner in | 
 |  *	the pi_state but cannot access the user space value. | 
 |  * | 
 |  * [7]	pi_state->owner can only be NULL when the OWNER_DIED bit is set. | 
 |  * | 
 |  * [8]	Owner and user space value match | 
 |  * | 
 |  * [9]	There is no transient state which sets the user space TID to 0 | 
 |  *	except exit_robust_list(), but this is indicated by the | 
 |  *	FUTEX_OWNER_DIED bit. See [4] | 
 |  * | 
 |  * [10] There is no transient state which leaves owner and user space | 
 |  *	TID out of sync. Except one error case where the kernel is denied | 
 |  *	write access to the user address, see fixup_pi_state_owner(). | 
 |  * | 
 |  * | 
 |  * Serialization and lifetime rules: | 
 |  * | 
 |  * hb->lock: | 
 |  * | 
 |  *	hb -> futex_q, relation | 
 |  *	futex_q -> pi_state, relation | 
 |  * | 
 |  *	(cannot be raw because hb can contain arbitrary amount | 
 |  *	 of futex_q's) | 
 |  * | 
 |  * pi_mutex->wait_lock: | 
 |  * | 
 |  *	{uval, pi_state} | 
 |  * | 
 |  *	(and pi_mutex 'obviously') | 
 |  * | 
 |  * p->pi_lock: | 
 |  * | 
 |  *	p->pi_state_list -> pi_state->list, relation | 
 |  * | 
 |  * pi_state->refcount: | 
 |  * | 
 |  *	pi_state lifetime | 
 |  * | 
 |  * | 
 |  * Lock order: | 
 |  * | 
 |  *   hb->lock | 
 |  *     pi_mutex->wait_lock | 
 |  *       p->pi_lock | 
 |  * | 
 |  */ | 
 |  | 
 | /* | 
 |  * Validate that the existing waiter has a pi_state and sanity check | 
 |  * the pi_state against the user space value. If correct, attach to | 
 |  * it. | 
 |  */ | 
 | static int attach_to_pi_state(u32 __user *uaddr, u32 uval, | 
 | 			      struct futex_pi_state *pi_state, | 
 | 			      struct futex_pi_state **ps) | 
 | { | 
 | 	pid_t pid = uval & FUTEX_TID_MASK; | 
 | 	u32 uval2; | 
 | 	int ret; | 
 |  | 
 | 	/* | 
 | 	 * Userspace might have messed up non-PI and PI futexes [3] | 
 | 	 */ | 
 | 	if (unlikely(!pi_state)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	/* | 
 | 	 * We get here with hb->lock held, and having found a | 
 | 	 * futex_top_waiter(). This means that futex_lock_pi() of said futex_q | 
 | 	 * has dropped the hb->lock in between queue_me() and unqueue_me_pi(), | 
 | 	 * which in turn means that futex_lock_pi() still has a reference on | 
 | 	 * our pi_state. | 
 | 	 * | 
 | 	 * The waiter holding a reference on @pi_state also protects against | 
 | 	 * the unlocked put_pi_state() in futex_unlock_pi(), futex_lock_pi() | 
 | 	 * and futex_wait_requeue_pi() as it cannot go to 0 and consequently | 
 | 	 * free pi_state before we can take a reference ourselves. | 
 | 	 */ | 
 | 	WARN_ON(!refcount_read(&pi_state->refcount)); | 
 |  | 
 | 	/* | 
 | 	 * Now that we have a pi_state, we can acquire wait_lock | 
 | 	 * and do the state validation. | 
 | 	 */ | 
 | 	raw_spin_lock_irq(&pi_state->pi_mutex.wait_lock); | 
 |  | 
 | 	/* | 
 | 	 * Since {uval, pi_state} is serialized by wait_lock, and our current | 
 | 	 * uval was read without holding it, it can have changed. Verify it | 
 | 	 * still is what we expect it to be, otherwise retry the entire | 
 | 	 * operation. | 
 | 	 */ | 
 | 	if (get_futex_value_locked(&uval2, uaddr)) | 
 | 		goto out_efault; | 
 |  | 
 | 	if (uval != uval2) | 
 | 		goto out_eagain; | 
 |  | 
 | 	/* | 
 | 	 * Handle the owner died case: | 
 | 	 */ | 
 | 	if (uval & FUTEX_OWNER_DIED) { | 
 | 		/* | 
 | 		 * exit_pi_state_list sets owner to NULL and wakes the | 
 | 		 * topmost waiter. The task which acquires the | 
 | 		 * pi_state->rt_mutex will fixup owner. | 
 | 		 */ | 
 | 		if (!pi_state->owner) { | 
 | 			/* | 
 | 			 * No pi state owner, but the user space TID | 
 | 			 * is not 0. Inconsistent state. [5] | 
 | 			 */ | 
 | 			if (pid) | 
 | 				goto out_einval; | 
 | 			/* | 
 | 			 * Take a ref on the state and return success. [4] | 
 | 			 */ | 
 | 			goto out_attach; | 
 | 		} | 
 |  | 
 | 		/* | 
 | 		 * If TID is 0, then either the dying owner has not | 
 | 		 * yet executed exit_pi_state_list() or some waiter | 
 | 		 * acquired the rtmutex in the pi state, but did not | 
 | 		 * yet fixup the TID in user space. | 
 | 		 * | 
 | 		 * Take a ref on the state and return success. [6] | 
 | 		 */ | 
 | 		if (!pid) | 
 | 			goto out_attach; | 
 | 	} else { | 
 | 		/* | 
 | 		 * If the owner died bit is not set, then the pi_state | 
 | 		 * must have an owner. [7] | 
 | 		 */ | 
 | 		if (!pi_state->owner) | 
 | 			goto out_einval; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Bail out if user space manipulated the futex value. If pi | 
 | 	 * state exists then the owner TID must be the same as the | 
 | 	 * user space TID. [9/10] | 
 | 	 */ | 
 | 	if (pid != task_pid_vnr(pi_state->owner)) | 
 | 		goto out_einval; | 
 |  | 
 | out_attach: | 
 | 	get_pi_state(pi_state); | 
 | 	raw_spin_unlock_irq(&pi_state->pi_mutex.wait_lock); | 
 | 	*ps = pi_state; | 
 | 	return 0; | 
 |  | 
 | out_einval: | 
 | 	ret = -EINVAL; | 
 | 	goto out_error; | 
 |  | 
 | out_eagain: | 
 | 	ret = -EAGAIN; | 
 | 	goto out_error; | 
 |  | 
 | out_efault: | 
 | 	ret = -EFAULT; | 
 | 	goto out_error; | 
 |  | 
 | out_error: | 
 | 	raw_spin_unlock_irq(&pi_state->pi_mutex.wait_lock); | 
 | 	return ret; | 
 | } | 
 |  | 
 | /** | 
 |  * wait_for_owner_exiting - Block until the owner has exited | 
 |  * @exiting:	Pointer to the exiting task | 
 |  * | 
 |  * Caller must hold a refcount on @exiting. | 
 |  */ | 
 | static void wait_for_owner_exiting(int ret, struct task_struct *exiting) | 
 | { | 
 | 	if (ret != -EBUSY) { | 
 | 		WARN_ON_ONCE(exiting); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	if (WARN_ON_ONCE(ret == -EBUSY && !exiting)) | 
 | 		return; | 
 |  | 
 | 	mutex_lock(&exiting->futex_exit_mutex); | 
 | 	/* | 
 | 	 * No point in doing state checking here. If the waiter got here | 
 | 	 * while the task was in exec()->exec_futex_release() then it can | 
 | 	 * have any FUTEX_STATE_* value when the waiter has acquired the | 
 | 	 * mutex. OK, if running, EXITING or DEAD if it reached exit() | 
 | 	 * already. Highly unlikely and not a problem. Just one more round | 
 | 	 * through the futex maze. | 
 | 	 */ | 
 | 	mutex_unlock(&exiting->futex_exit_mutex); | 
 |  | 
 | 	put_task_struct(exiting); | 
 | } | 
 |  | 
 | static int handle_exit_race(u32 __user *uaddr, u32 uval, | 
 | 			    struct task_struct *tsk) | 
 | { | 
 | 	u32 uval2; | 
 |  | 
 | 	/* | 
 | 	 * If the futex exit state is not yet FUTEX_STATE_DEAD, tell the | 
 | 	 * caller that the alleged owner is busy. | 
 | 	 */ | 
 | 	if (tsk && tsk->futex_state != FUTEX_STATE_DEAD) | 
 | 		return -EBUSY; | 
 |  | 
 | 	/* | 
 | 	 * Reread the user space value to handle the following situation: | 
 | 	 * | 
 | 	 * CPU0				CPU1 | 
 | 	 * | 
 | 	 * sys_exit()			sys_futex() | 
 | 	 *  do_exit()			 futex_lock_pi() | 
 | 	 *                                futex_lock_pi_atomic() | 
 | 	 *   exit_signals(tsk)		    No waiters: | 
 | 	 *    tsk->flags |= PF_EXITING;	    *uaddr == 0x00000PID | 
 | 	 *  mm_release(tsk)		    Set waiter bit | 
 | 	 *   exit_robust_list(tsk) {	    *uaddr = 0x80000PID; | 
 | 	 *      Set owner died		    attach_to_pi_owner() { | 
 | 	 *    *uaddr = 0xC0000000;	     tsk = get_task(PID); | 
 | 	 *   }				     if (!tsk->flags & PF_EXITING) { | 
 | 	 *  ...				       attach(); | 
 | 	 *  tsk->futex_state =               } else { | 
 | 	 *	FUTEX_STATE_DEAD;              if (tsk->futex_state != | 
 | 	 *					  FUTEX_STATE_DEAD) | 
 | 	 *				         return -EAGAIN; | 
 | 	 *				       return -ESRCH; <--- FAIL | 
 | 	 *				     } | 
 | 	 * | 
 | 	 * Returning ESRCH unconditionally is wrong here because the | 
 | 	 * user space value has been changed by the exiting task. | 
 | 	 * | 
 | 	 * The same logic applies to the case where the exiting task is | 
 | 	 * already gone. | 
 | 	 */ | 
 | 	if (get_futex_value_locked(&uval2, uaddr)) | 
 | 		return -EFAULT; | 
 |  | 
 | 	/* If the user space value has changed, try again. */ | 
 | 	if (uval2 != uval) | 
 | 		return -EAGAIN; | 
 |  | 
 | 	/* | 
 | 	 * The exiting task did not have a robust list, the robust list was | 
 | 	 * corrupted or the user space value in *uaddr is simply bogus. | 
 | 	 * Give up and tell user space. | 
 | 	 */ | 
 | 	return -ESRCH; | 
 | } | 
 |  | 
 | /* | 
 |  * Lookup the task for the TID provided from user space and attach to | 
 |  * it after doing proper sanity checks. | 
 |  */ | 
 | static int attach_to_pi_owner(u32 __user *uaddr, u32 uval, union futex_key *key, | 
 | 			      struct futex_pi_state **ps, | 
 | 			      struct task_struct **exiting) | 
 | { | 
 | 	pid_t pid = uval & FUTEX_TID_MASK; | 
 | 	struct futex_pi_state *pi_state; | 
 | 	struct task_struct *p; | 
 |  | 
 | 	/* | 
 | 	 * We are the first waiter - try to look up the real owner and attach | 
 | 	 * the new pi_state to it, but bail out when TID = 0 [1] | 
 | 	 * | 
 | 	 * The !pid check is paranoid. None of the call sites should end up | 
 | 	 * with pid == 0, but better safe than sorry. Let the caller retry | 
 | 	 */ | 
 | 	if (!pid) | 
 | 		return -EAGAIN; | 
 | 	p = find_get_task_by_vpid(pid); | 
 | 	if (!p) | 
 | 		return handle_exit_race(uaddr, uval, NULL); | 
 |  | 
 | 	if (unlikely(p->flags & PF_KTHREAD)) { | 
 | 		put_task_struct(p); | 
 | 		return -EPERM; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * We need to look at the task state to figure out, whether the | 
 | 	 * task is exiting. To protect against the change of the task state | 
 | 	 * in futex_exit_release(), we do this protected by p->pi_lock: | 
 | 	 */ | 
 | 	raw_spin_lock_irq(&p->pi_lock); | 
 | 	if (unlikely(p->futex_state != FUTEX_STATE_OK)) { | 
 | 		/* | 
 | 		 * The task is on the way out. When the futex state is | 
 | 		 * FUTEX_STATE_DEAD, we know that the task has finished | 
 | 		 * the cleanup: | 
 | 		 */ | 
 | 		int ret = handle_exit_race(uaddr, uval, p); | 
 |  | 
 | 		raw_spin_unlock_irq(&p->pi_lock); | 
 | 		/* | 
 | 		 * If the owner task is between FUTEX_STATE_EXITING and | 
 | 		 * FUTEX_STATE_DEAD then store the task pointer and keep | 
 | 		 * the reference on the task struct. The calling code will | 
 | 		 * drop all locks, wait for the task to reach | 
 | 		 * FUTEX_STATE_DEAD and then drop the refcount. This is | 
 | 		 * required to prevent a live lock when the current task | 
 | 		 * preempted the exiting task between the two states. | 
 | 		 */ | 
 | 		if (ret == -EBUSY) | 
 | 			*exiting = p; | 
 | 		else | 
 | 			put_task_struct(p); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * No existing pi state. First waiter. [2] | 
 | 	 * | 
 | 	 * This creates pi_state, we have hb->lock held, this means nothing can | 
 | 	 * observe this state, wait_lock is irrelevant. | 
 | 	 */ | 
 | 	pi_state = alloc_pi_state(); | 
 |  | 
 | 	/* | 
 | 	 * Initialize the pi_mutex in locked state and make @p | 
 | 	 * the owner of it: | 
 | 	 */ | 
 | 	rt_mutex_init_proxy_locked(&pi_state->pi_mutex, p); | 
 |  | 
 | 	/* Store the key for possible exit cleanups: */ | 
 | 	pi_state->key = *key; | 
 |  | 
 | 	WARN_ON(!list_empty(&pi_state->list)); | 
 | 	list_add(&pi_state->list, &p->pi_state_list); | 
 | 	/* | 
 | 	 * Assignment without holding pi_state->pi_mutex.wait_lock is safe | 
 | 	 * because there is no concurrency as the object is not published yet. | 
 | 	 */ | 
 | 	pi_state->owner = p; | 
 | 	raw_spin_unlock_irq(&p->pi_lock); | 
 |  | 
 | 	put_task_struct(p); | 
 |  | 
 | 	*ps = pi_state; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int lookup_pi_state(u32 __user *uaddr, u32 uval, | 
 | 			   struct futex_hash_bucket *hb, | 
 | 			   union futex_key *key, struct futex_pi_state **ps, | 
 | 			   struct task_struct **exiting) | 
 | { | 
 | 	struct futex_q *top_waiter = futex_top_waiter(hb, key); | 
 |  | 
 | 	/* | 
 | 	 * If there is a waiter on that futex, validate it and | 
 | 	 * attach to the pi_state when the validation succeeds. | 
 | 	 */ | 
 | 	if (top_waiter) | 
 | 		return attach_to_pi_state(uaddr, uval, top_waiter->pi_state, ps); | 
 |  | 
 | 	/* | 
 | 	 * We are the first waiter - try to look up the owner based on | 
 | 	 * @uval and attach to it. | 
 | 	 */ | 
 | 	return attach_to_pi_owner(uaddr, uval, key, ps, exiting); | 
 | } | 
 |  | 
 | static int lock_pi_update_atomic(u32 __user *uaddr, u32 uval, u32 newval) | 
 | { | 
 | 	int err; | 
 | 	u32 curval; | 
 |  | 
 | 	if (unlikely(should_fail_futex(true))) | 
 | 		return -EFAULT; | 
 |  | 
 | 	err = cmpxchg_futex_value_locked(&curval, uaddr, uval, newval); | 
 | 	if (unlikely(err)) | 
 | 		return err; | 
 |  | 
 | 	/* If user space value changed, let the caller retry */ | 
 | 	return curval != uval ? -EAGAIN : 0; | 
 | } | 
 |  | 
 | /** | 
 |  * futex_lock_pi_atomic() - Atomic work required to acquire a pi aware futex | 
 |  * @uaddr:		the pi futex user address | 
 |  * @hb:			the pi futex hash bucket | 
 |  * @key:		the futex key associated with uaddr and hb | 
 |  * @ps:			the pi_state pointer where we store the result of the | 
 |  *			lookup | 
 |  * @task:		the task to perform the atomic lock work for.  This will | 
 |  *			be "current" except in the case of requeue pi. | 
 |  * @exiting:		Pointer to store the task pointer of the owner task | 
 |  *			which is in the middle of exiting | 
 |  * @set_waiters:	force setting the FUTEX_WAITERS bit (1) or not (0) | 
 |  * | 
 |  * Return: | 
 |  *  -  0 - ready to wait; | 
 |  *  -  1 - acquired the lock; | 
 |  *  - <0 - error | 
 |  * | 
 |  * The hb->lock and futex_key refs shall be held by the caller. | 
 |  * | 
 |  * @exiting is only set when the return value is -EBUSY. If so, this holds | 
 |  * a refcount on the exiting task on return and the caller needs to drop it | 
 |  * after waiting for the exit to complete. | 
 |  */ | 
 | static int futex_lock_pi_atomic(u32 __user *uaddr, struct futex_hash_bucket *hb, | 
 | 				union futex_key *key, | 
 | 				struct futex_pi_state **ps, | 
 | 				struct task_struct *task, | 
 | 				struct task_struct **exiting, | 
 | 				int set_waiters) | 
 | { | 
 | 	u32 uval, newval, vpid = task_pid_vnr(task); | 
 | 	struct futex_q *top_waiter; | 
 | 	int ret; | 
 |  | 
 | 	/* | 
 | 	 * Read the user space value first so we can validate a few | 
 | 	 * things before proceeding further. | 
 | 	 */ | 
 | 	if (get_futex_value_locked(&uval, uaddr)) | 
 | 		return -EFAULT; | 
 |  | 
 | 	if (unlikely(should_fail_futex(true))) | 
 | 		return -EFAULT; | 
 |  | 
 | 	/* | 
 | 	 * Detect deadlocks. | 
 | 	 */ | 
 | 	if ((unlikely((uval & FUTEX_TID_MASK) == vpid))) | 
 | 		return -EDEADLK; | 
 |  | 
 | 	if ((unlikely(should_fail_futex(true)))) | 
 | 		return -EDEADLK; | 
 |  | 
 | 	/* | 
 | 	 * Lookup existing state first. If it exists, try to attach to | 
 | 	 * its pi_state. | 
 | 	 */ | 
 | 	top_waiter = futex_top_waiter(hb, key); | 
 | 	if (top_waiter) | 
 | 		return attach_to_pi_state(uaddr, uval, top_waiter->pi_state, ps); | 
 |  | 
 | 	/* | 
 | 	 * No waiter and user TID is 0. We are here because the | 
 | 	 * waiters or the owner died bit is set or called from | 
 | 	 * requeue_cmp_pi or for whatever reason something took the | 
 | 	 * syscall. | 
 | 	 */ | 
 | 	if (!(uval & FUTEX_TID_MASK)) { | 
 | 		/* | 
 | 		 * We take over the futex. No other waiters and the user space | 
 | 		 * TID is 0. We preserve the owner died bit. | 
 | 		 */ | 
 | 		newval = uval & FUTEX_OWNER_DIED; | 
 | 		newval |= vpid; | 
 |  | 
 | 		/* The futex requeue_pi code can enforce the waiters bit */ | 
 | 		if (set_waiters) | 
 | 			newval |= FUTEX_WAITERS; | 
 |  | 
 | 		ret = lock_pi_update_atomic(uaddr, uval, newval); | 
 | 		/* If the take over worked, return 1 */ | 
 | 		return ret < 0 ? ret : 1; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * First waiter. Set the waiters bit before attaching ourself to | 
 | 	 * the owner. If owner tries to unlock, it will be forced into | 
 | 	 * the kernel and blocked on hb->lock. | 
 | 	 */ | 
 | 	newval = uval | FUTEX_WAITERS; | 
 | 	ret = lock_pi_update_atomic(uaddr, uval, newval); | 
 | 	if (ret) | 
 | 		return ret; | 
 | 	/* | 
 | 	 * If the update of the user space value succeeded, we try to | 
 | 	 * attach to the owner. If that fails, no harm done, we only | 
 | 	 * set the FUTEX_WAITERS bit in the user space variable. | 
 | 	 */ | 
 | 	return attach_to_pi_owner(uaddr, newval, key, ps, exiting); | 
 | } | 
 |  | 
 | /** | 
 |  * __unqueue_futex() - Remove the futex_q from its futex_hash_bucket | 
 |  * @q:	The futex_q to unqueue | 
 |  * | 
 |  * The q->lock_ptr must not be NULL and must be held by the caller. | 
 |  */ | 
 | static void __unqueue_futex(struct futex_q *q) | 
 | { | 
 | 	struct futex_hash_bucket *hb; | 
 |  | 
 | 	if (WARN_ON_SMP(!q->lock_ptr) || WARN_ON(plist_node_empty(&q->list))) | 
 | 		return; | 
 | 	lockdep_assert_held(q->lock_ptr); | 
 |  | 
 | 	hb = container_of(q->lock_ptr, struct futex_hash_bucket, lock); | 
 | 	plist_del(&q->list, &hb->chain); | 
 | 	hb_waiters_dec(hb); | 
 | } | 
 |  | 
 | /* | 
 |  * The hash bucket lock must be held when this is called. | 
 |  * Afterwards, the futex_q must not be accessed. Callers | 
 |  * must ensure to later call wake_up_q() for the actual | 
 |  * wakeups to occur. | 
 |  */ | 
 | static void mark_wake_futex(struct wake_q_head *wake_q, struct futex_q *q) | 
 | { | 
 | 	struct task_struct *p = q->task; | 
 |  | 
 | 	if (WARN(q->pi_state || q->rt_waiter, "refusing to wake PI futex\n")) | 
 | 		return; | 
 |  | 
 | 	get_task_struct(p); | 
 | 	__unqueue_futex(q); | 
 | 	/* | 
 | 	 * The waiting task can free the futex_q as soon as q->lock_ptr = NULL | 
 | 	 * is written, without taking any locks. This is possible in the event | 
 | 	 * of a spurious wakeup, for example. A memory barrier is required here | 
 | 	 * to prevent the following store to lock_ptr from getting ahead of the | 
 | 	 * plist_del in __unqueue_futex(). | 
 | 	 */ | 
 | 	smp_store_release(&q->lock_ptr, NULL); | 
 |  | 
 | 	/* | 
 | 	 * Queue the task for later wakeup for after we've released | 
 | 	 * the hb->lock. wake_q_add() grabs reference to p. | 
 | 	 */ | 
 | 	wake_q_add_safe(wake_q, p); | 
 | } | 
 |  | 
 | /* | 
 |  * Caller must hold a reference on @pi_state. | 
 |  */ | 
 | static int wake_futex_pi(u32 __user *uaddr, u32 uval, struct futex_pi_state *pi_state) | 
 | { | 
 | 	u32 curval, newval; | 
 | 	struct task_struct *new_owner; | 
 | 	bool postunlock = false; | 
 | 	DEFINE_WAKE_Q(wake_q); | 
 | 	int ret = 0; | 
 |  | 
 | 	new_owner = rt_mutex_next_owner(&pi_state->pi_mutex); | 
 | 	if (WARN_ON_ONCE(!new_owner)) { | 
 | 		/* | 
 | 		 * As per the comment in futex_unlock_pi() this should not happen. | 
 | 		 * | 
 | 		 * When this happens, give up our locks and try again, giving | 
 | 		 * the futex_lock_pi() instance time to complete, either by | 
 | 		 * waiting on the rtmutex or removing itself from the futex | 
 | 		 * queue. | 
 | 		 */ | 
 | 		ret = -EAGAIN; | 
 | 		goto out_unlock; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * We pass it to the next owner. The WAITERS bit is always kept | 
 | 	 * enabled while there is PI state around. We cleanup the owner | 
 | 	 * died bit, because we are the owner. | 
 | 	 */ | 
 | 	newval = FUTEX_WAITERS | task_pid_vnr(new_owner); | 
 |  | 
 | 	if (unlikely(should_fail_futex(true))) { | 
 | 		ret = -EFAULT; | 
 | 		goto out_unlock; | 
 | 	} | 
 |  | 
 | 	ret = cmpxchg_futex_value_locked(&curval, uaddr, uval, newval); | 
 | 	if (!ret && (curval != uval)) { | 
 | 		/* | 
 | 		 * If a unconditional UNLOCK_PI operation (user space did not | 
 | 		 * try the TID->0 transition) raced with a waiter setting the | 
 | 		 * FUTEX_WAITERS flag between get_user() and locking the hash | 
 | 		 * bucket lock, retry the operation. | 
 | 		 */ | 
 | 		if ((FUTEX_TID_MASK & curval) == uval) | 
 | 			ret = -EAGAIN; | 
 | 		else | 
 | 			ret = -EINVAL; | 
 | 	} | 
 |  | 
 | 	if (!ret) { | 
 | 		/* | 
 | 		 * This is a point of no return; once we modified the uval | 
 | 		 * there is no going back and subsequent operations must | 
 | 		 * not fail. | 
 | 		 */ | 
 | 		pi_state_update_owner(pi_state, new_owner); | 
 | 		postunlock = __rt_mutex_futex_unlock(&pi_state->pi_mutex, &wake_q); | 
 | 	} | 
 |  | 
 | out_unlock: | 
 | 	raw_spin_unlock_irq(&pi_state->pi_mutex.wait_lock); | 
 |  | 
 | 	if (postunlock) | 
 | 		rt_mutex_postunlock(&wake_q); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* | 
 |  * Express the locking dependencies for lockdep: | 
 |  */ | 
 | static inline void | 
 | double_lock_hb(struct futex_hash_bucket *hb1, struct futex_hash_bucket *hb2) | 
 | { | 
 | 	if (hb1 <= hb2) { | 
 | 		spin_lock(&hb1->lock); | 
 | 		if (hb1 < hb2) | 
 | 			spin_lock_nested(&hb2->lock, SINGLE_DEPTH_NESTING); | 
 | 	} else { /* hb1 > hb2 */ | 
 | 		spin_lock(&hb2->lock); | 
 | 		spin_lock_nested(&hb1->lock, SINGLE_DEPTH_NESTING); | 
 | 	} | 
 | } | 
 |  | 
 | static inline void | 
 | double_unlock_hb(struct futex_hash_bucket *hb1, struct futex_hash_bucket *hb2) | 
 | { | 
 | 	spin_unlock(&hb1->lock); | 
 | 	if (hb1 != hb2) | 
 | 		spin_unlock(&hb2->lock); | 
 | } | 
 |  | 
 | /* | 
 |  * Wake up waiters matching bitset queued on this futex (uaddr). | 
 |  */ | 
 | static int | 
 | futex_wake(u32 __user *uaddr, unsigned int flags, int nr_wake, u32 bitset) | 
 | { | 
 | 	struct futex_hash_bucket *hb; | 
 | 	struct futex_q *this, *next; | 
 | 	union futex_key key = FUTEX_KEY_INIT; | 
 | 	int ret; | 
 | 	DEFINE_WAKE_Q(wake_q); | 
 |  | 
 | 	if (!bitset) | 
 | 		return -EINVAL; | 
 |  | 
 | 	ret = get_futex_key(uaddr, flags & FLAGS_SHARED, &key, FUTEX_READ); | 
 | 	if (unlikely(ret != 0)) | 
 | 		goto out; | 
 |  | 
 | 	hb = hash_futex(&key); | 
 |  | 
 | 	/* Make sure we really have tasks to wakeup */ | 
 | 	if (!hb_waiters_pending(hb)) | 
 | 		goto out_put_key; | 
 |  | 
 | 	spin_lock(&hb->lock); | 
 |  | 
 | 	plist_for_each_entry_safe(this, next, &hb->chain, list) { | 
 | 		if (match_futex (&this->key, &key)) { | 
 | 			if (this->pi_state || this->rt_waiter) { | 
 | 				ret = -EINVAL; | 
 | 				break; | 
 | 			} | 
 |  | 
 | 			/* Check if one of the bits is set in both bitsets */ | 
 | 			if (!(this->bitset & bitset)) | 
 | 				continue; | 
 |  | 
 | 			mark_wake_futex(&wake_q, this); | 
 | 			if (++ret >= nr_wake) | 
 | 				break; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	spin_unlock(&hb->lock); | 
 | 	wake_up_q(&wake_q); | 
 | out_put_key: | 
 | 	put_futex_key(&key); | 
 | out: | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int futex_atomic_op_inuser(unsigned int encoded_op, u32 __user *uaddr) | 
 | { | 
 | 	unsigned int op =	  (encoded_op & 0x70000000) >> 28; | 
 | 	unsigned int cmp =	  (encoded_op & 0x0f000000) >> 24; | 
 | 	int oparg = sign_extend32((encoded_op & 0x00fff000) >> 12, 11); | 
 | 	int cmparg = sign_extend32(encoded_op & 0x00000fff, 11); | 
 | 	int oldval, ret; | 
 |  | 
 | 	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28)) { | 
 | 		if (oparg < 0 || oparg > 31) { | 
 | 			char comm[sizeof(current->comm)]; | 
 | 			/* | 
 | 			 * kill this print and return -EINVAL when userspace | 
 | 			 * is sane again | 
 | 			 */ | 
 | 			pr_info_ratelimited("futex_wake_op: %s tries to shift op by %d; fix this program\n", | 
 | 					get_task_comm(comm, current), oparg); | 
 | 			oparg &= 31; | 
 | 		} | 
 | 		oparg = 1 << oparg; | 
 | 	} | 
 |  | 
 | 	if (!access_ok(uaddr, sizeof(u32))) | 
 | 		return -EFAULT; | 
 |  | 
 | 	ret = arch_futex_atomic_op_inuser(op, oparg, &oldval, uaddr); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	switch (cmp) { | 
 | 	case FUTEX_OP_CMP_EQ: | 
 | 		return oldval == cmparg; | 
 | 	case FUTEX_OP_CMP_NE: | 
 | 		return oldval != cmparg; | 
 | 	case FUTEX_OP_CMP_LT: | 
 | 		return oldval < cmparg; | 
 | 	case FUTEX_OP_CMP_GE: | 
 | 		return oldval >= cmparg; | 
 | 	case FUTEX_OP_CMP_LE: | 
 | 		return oldval <= cmparg; | 
 | 	case FUTEX_OP_CMP_GT: | 
 | 		return oldval > cmparg; | 
 | 	default: | 
 | 		return -ENOSYS; | 
 | 	} | 
 | } | 
 |  | 
 | /* | 
 |  * Wake up all waiters hashed on the physical page that is mapped | 
 |  * to this virtual address: | 
 |  */ | 
 | static int | 
 | futex_wake_op(u32 __user *uaddr1, unsigned int flags, u32 __user *uaddr2, | 
 | 	      int nr_wake, int nr_wake2, int op) | 
 | { | 
 | 	union futex_key key1 = FUTEX_KEY_INIT, key2 = FUTEX_KEY_INIT; | 
 | 	struct futex_hash_bucket *hb1, *hb2; | 
 | 	struct futex_q *this, *next; | 
 | 	int ret, op_ret; | 
 | 	DEFINE_WAKE_Q(wake_q); | 
 |  | 
 | retry: | 
 | 	ret = get_futex_key(uaddr1, flags & FLAGS_SHARED, &key1, FUTEX_READ); | 
 | 	if (unlikely(ret != 0)) | 
 | 		goto out; | 
 | 	ret = get_futex_key(uaddr2, flags & FLAGS_SHARED, &key2, FUTEX_WRITE); | 
 | 	if (unlikely(ret != 0)) | 
 | 		goto out_put_key1; | 
 |  | 
 | 	hb1 = hash_futex(&key1); | 
 | 	hb2 = hash_futex(&key2); | 
 |  | 
 | retry_private: | 
 | 	double_lock_hb(hb1, hb2); | 
 | 	op_ret = futex_atomic_op_inuser(op, uaddr2); | 
 | 	if (unlikely(op_ret < 0)) { | 
 | 		double_unlock_hb(hb1, hb2); | 
 |  | 
 | 		if (!IS_ENABLED(CONFIG_MMU) || | 
 | 		    unlikely(op_ret != -EFAULT && op_ret != -EAGAIN)) { | 
 | 			/* | 
 | 			 * we don't get EFAULT from MMU faults if we don't have | 
 | 			 * an MMU, but we might get them from range checking | 
 | 			 */ | 
 | 			ret = op_ret; | 
 | 			goto out_put_keys; | 
 | 		} | 
 |  | 
 | 		if (op_ret == -EFAULT) { | 
 | 			ret = fault_in_user_writeable(uaddr2); | 
 | 			if (ret) | 
 | 				goto out_put_keys; | 
 | 		} | 
 |  | 
 | 		if (!(flags & FLAGS_SHARED)) { | 
 | 			cond_resched(); | 
 | 			goto retry_private; | 
 | 		} | 
 |  | 
 | 		put_futex_key(&key2); | 
 | 		put_futex_key(&key1); | 
 | 		cond_resched(); | 
 | 		goto retry; | 
 | 	} | 
 |  | 
 | 	plist_for_each_entry_safe(this, next, &hb1->chain, list) { | 
 | 		if (match_futex (&this->key, &key1)) { | 
 | 			if (this->pi_state || this->rt_waiter) { | 
 | 				ret = -EINVAL; | 
 | 				goto out_unlock; | 
 | 			} | 
 | 			mark_wake_futex(&wake_q, this); | 
 | 			if (++ret >= nr_wake) | 
 | 				break; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (op_ret > 0) { | 
 | 		op_ret = 0; | 
 | 		plist_for_each_entry_safe(this, next, &hb2->chain, list) { | 
 | 			if (match_futex (&this->key, &key2)) { | 
 | 				if (this->pi_state || this->rt_waiter) { | 
 | 					ret = -EINVAL; | 
 | 					goto out_unlock; | 
 | 				} | 
 | 				mark_wake_futex(&wake_q, this); | 
 | 				if (++op_ret >= nr_wake2) | 
 | 					break; | 
 | 			} | 
 | 		} | 
 | 		ret += op_ret; | 
 | 	} | 
 |  | 
 | out_unlock: | 
 | 	double_unlock_hb(hb1, hb2); | 
 | 	wake_up_q(&wake_q); | 
 | out_put_keys: | 
 | 	put_futex_key(&key2); | 
 | out_put_key1: | 
 | 	put_futex_key(&key1); | 
 | out: | 
 | 	return ret; | 
 | } | 
 |  | 
 | /** | 
 |  * requeue_futex() - Requeue a futex_q from one hb to another | 
 |  * @q:		the futex_q to requeue | 
 |  * @hb1:	the source hash_bucket | 
 |  * @hb2:	the target hash_bucket | 
 |  * @key2:	the new key for the requeued futex_q | 
 |  */ | 
 | static inline | 
 | void requeue_futex(struct futex_q *q, struct futex_hash_bucket *hb1, | 
 | 		   struct futex_hash_bucket *hb2, union futex_key *key2) | 
 | { | 
 |  | 
 | 	/* | 
 | 	 * If key1 and key2 hash to the same bucket, no need to | 
 | 	 * requeue. | 
 | 	 */ | 
 | 	if (likely(&hb1->chain != &hb2->chain)) { | 
 | 		plist_del(&q->list, &hb1->chain); | 
 | 		hb_waiters_dec(hb1); | 
 | 		hb_waiters_inc(hb2); | 
 | 		plist_add(&q->list, &hb2->chain); | 
 | 		q->lock_ptr = &hb2->lock; | 
 | 	} | 
 | 	get_futex_key_refs(key2); | 
 | 	q->key = *key2; | 
 | } | 
 |  | 
 | /** | 
 |  * requeue_pi_wake_futex() - Wake a task that acquired the lock during requeue | 
 |  * @q:		the futex_q | 
 |  * @key:	the key of the requeue target futex | 
 |  * @hb:		the hash_bucket of the requeue target futex | 
 |  * | 
 |  * During futex_requeue, with requeue_pi=1, it is possible to acquire the | 
 |  * target futex if it is uncontended or via a lock steal.  Set the futex_q key | 
 |  * to the requeue target futex so the waiter can detect the wakeup on the right | 
 |  * futex, but remove it from the hb and NULL the rt_waiter so it can detect | 
 |  * atomic lock acquisition.  Set the q->lock_ptr to the requeue target hb->lock | 
 |  * to protect access to the pi_state to fixup the owner later.  Must be called | 
 |  * with both q->lock_ptr and hb->lock held. | 
 |  */ | 
 | static inline | 
 | void requeue_pi_wake_futex(struct futex_q *q, union futex_key *key, | 
 | 			   struct futex_hash_bucket *hb) | 
 | { | 
 | 	get_futex_key_refs(key); | 
 | 	q->key = *key; | 
 |  | 
 | 	__unqueue_futex(q); | 
 |  | 
 | 	WARN_ON(!q->rt_waiter); | 
 | 	q->rt_waiter = NULL; | 
 |  | 
 | 	q->lock_ptr = &hb->lock; | 
 |  | 
 | 	wake_up_state(q->task, TASK_NORMAL); | 
 | } | 
 |  | 
 | /** | 
 |  * futex_proxy_trylock_atomic() - Attempt an atomic lock for the top waiter | 
 |  * @pifutex:		the user address of the to futex | 
 |  * @hb1:		the from futex hash bucket, must be locked by the caller | 
 |  * @hb2:		the to futex hash bucket, must be locked by the caller | 
 |  * @key1:		the from futex key | 
 |  * @key2:		the to futex key | 
 |  * @ps:			address to store the pi_state pointer | 
 |  * @exiting:		Pointer to store the task pointer of the owner task | 
 |  *			which is in the middle of exiting | 
 |  * @set_waiters:	force setting the FUTEX_WAITERS bit (1) or not (0) | 
 |  * | 
 |  * Try and get the lock on behalf of the top waiter if we can do it atomically. | 
 |  * Wake the top waiter if we succeed.  If the caller specified set_waiters, | 
 |  * then direct futex_lock_pi_atomic() to force setting the FUTEX_WAITERS bit. | 
 |  * hb1 and hb2 must be held by the caller. | 
 |  * | 
 |  * @exiting is only set when the return value is -EBUSY. If so, this holds | 
 |  * a refcount on the exiting task on return and the caller needs to drop it | 
 |  * after waiting for the exit to complete. | 
 |  * | 
 |  * Return: | 
 |  *  -  0 - failed to acquire the lock atomically; | 
 |  *  - >0 - acquired the lock, return value is vpid of the top_waiter | 
 |  *  - <0 - error | 
 |  */ | 
 | static int | 
 | futex_proxy_trylock_atomic(u32 __user *pifutex, struct futex_hash_bucket *hb1, | 
 | 			   struct futex_hash_bucket *hb2, union futex_key *key1, | 
 | 			   union futex_key *key2, struct futex_pi_state **ps, | 
 | 			   struct task_struct **exiting, int set_waiters) | 
 | { | 
 | 	struct futex_q *top_waiter = NULL; | 
 | 	u32 curval; | 
 | 	int ret, vpid; | 
 |  | 
 | 	if (get_futex_value_locked(&curval, pifutex)) | 
 | 		return -EFAULT; | 
 |  | 
 | 	if (unlikely(should_fail_futex(true))) | 
 | 		return -EFAULT; | 
 |  | 
 | 	/* | 
 | 	 * Find the top_waiter and determine if there are additional waiters. | 
 | 	 * If the caller intends to requeue more than 1 waiter to pifutex, | 
 | 	 * force futex_lock_pi_atomic() to set the FUTEX_WAITERS bit now, | 
 | 	 * as we have means to handle the possible fault.  If not, don't set | 
 | 	 * the bit unecessarily as it will force the subsequent unlock to enter | 
 | 	 * the kernel. | 
 | 	 */ | 
 | 	top_waiter = futex_top_waiter(hb1, key1); | 
 |  | 
 | 	/* There are no waiters, nothing for us to do. */ | 
 | 	if (!top_waiter) | 
 | 		return 0; | 
 |  | 
 | 	/* Ensure we requeue to the expected futex. */ | 
 | 	if (!match_futex(top_waiter->requeue_pi_key, key2)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	/* | 
 | 	 * Try to take the lock for top_waiter.  Set the FUTEX_WAITERS bit in | 
 | 	 * the contended case or if set_waiters is 1.  The pi_state is returned | 
 | 	 * in ps in contended cases. | 
 | 	 */ | 
 | 	vpid = task_pid_vnr(top_waiter->task); | 
 | 	ret = futex_lock_pi_atomic(pifutex, hb2, key2, ps, top_waiter->task, | 
 | 				   exiting, set_waiters); | 
 | 	if (ret == 1) { | 
 | 		requeue_pi_wake_futex(top_waiter, key2, hb2); | 
 | 		return vpid; | 
 | 	} | 
 | 	return ret; | 
 | } | 
 |  | 
 | /** | 
 |  * futex_requeue() - Requeue waiters from uaddr1 to uaddr2 | 
 |  * @uaddr1:	source futex user address | 
 |  * @flags:	futex flags (FLAGS_SHARED, etc.) | 
 |  * @uaddr2:	target futex user address | 
 |  * @nr_wake:	number of waiters to wake (must be 1 for requeue_pi) | 
 |  * @nr_requeue:	number of waiters to requeue (0-INT_MAX) | 
 |  * @cmpval:	@uaddr1 expected value (or %NULL) | 
 |  * @requeue_pi:	if we are attempting to requeue from a non-pi futex to a | 
 |  *		pi futex (pi to pi requeue is not supported) | 
 |  * | 
 |  * Requeue waiters on uaddr1 to uaddr2. In the requeue_pi case, try to acquire | 
 |  * uaddr2 atomically on behalf of the top waiter. | 
 |  * | 
 |  * Return: | 
 |  *  - >=0 - on success, the number of tasks requeued or woken; | 
 |  *  -  <0 - on error | 
 |  */ | 
 | static int futex_requeue(u32 __user *uaddr1, unsigned int flags, | 
 | 			 u32 __user *uaddr2, int nr_wake, int nr_requeue, | 
 | 			 u32 *cmpval, int requeue_pi) | 
 | { | 
 | 	union futex_key key1 = FUTEX_KEY_INIT, key2 = FUTEX_KEY_INIT; | 
 | 	int drop_count = 0, task_count = 0, ret; | 
 | 	struct futex_pi_state *pi_state = NULL; | 
 | 	struct futex_hash_bucket *hb1, *hb2; | 
 | 	struct futex_q *this, *next; | 
 | 	DEFINE_WAKE_Q(wake_q); | 
 |  | 
 | 	if (nr_wake < 0 || nr_requeue < 0) | 
 | 		return -EINVAL; | 
 |  | 
 | 	/* | 
 | 	 * When PI not supported: return -ENOSYS if requeue_pi is true, | 
 | 	 * consequently the compiler knows requeue_pi is always false past | 
 | 	 * this point which will optimize away all the conditional code | 
 | 	 * further down. | 
 | 	 */ | 
 | 	if (!IS_ENABLED(CONFIG_FUTEX_PI) && requeue_pi) | 
 | 		return -ENOSYS; | 
 |  | 
 | 	if (requeue_pi) { | 
 | 		/* | 
 | 		 * Requeue PI only works on two distinct uaddrs. This | 
 | 		 * check is only valid for private futexes. See below. | 
 | 		 */ | 
 | 		if (uaddr1 == uaddr2) | 
 | 			return -EINVAL; | 
 |  | 
 | 		/* | 
 | 		 * requeue_pi requires a pi_state, try to allocate it now | 
 | 		 * without any locks in case it fails. | 
 | 		 */ | 
 | 		if (refill_pi_state_cache()) | 
 | 			return -ENOMEM; | 
 | 		/* | 
 | 		 * requeue_pi must wake as many tasks as it can, up to nr_wake | 
 | 		 * + nr_requeue, since it acquires the rt_mutex prior to | 
 | 		 * returning to userspace, so as to not leave the rt_mutex with | 
 | 		 * waiters and no owner.  However, second and third wake-ups | 
 | 		 * cannot be predicted as they involve race conditions with the | 
 | 		 * first wake and a fault while looking up the pi_state.  Both | 
 | 		 * pthread_cond_signal() and pthread_cond_broadcast() should | 
 | 		 * use nr_wake=1. | 
 | 		 */ | 
 | 		if (nr_wake != 1) | 
 | 			return -EINVAL; | 
 | 	} | 
 |  | 
 | retry: | 
 | 	ret = get_futex_key(uaddr1, flags & FLAGS_SHARED, &key1, FUTEX_READ); | 
 | 	if (unlikely(ret != 0)) | 
 | 		goto out; | 
 | 	ret = get_futex_key(uaddr2, flags & FLAGS_SHARED, &key2, | 
 | 			    requeue_pi ? FUTEX_WRITE : FUTEX_READ); | 
 | 	if (unlikely(ret != 0)) | 
 | 		goto out_put_key1; | 
 |  | 
 | 	/* | 
 | 	 * The check above which compares uaddrs is not sufficient for | 
 | 	 * shared futexes. We need to compare the keys: | 
 | 	 */ | 
 | 	if (requeue_pi && match_futex(&key1, &key2)) { | 
 | 		ret = -EINVAL; | 
 | 		goto out_put_keys; | 
 | 	} | 
 |  | 
 | 	hb1 = hash_futex(&key1); | 
 | 	hb2 = hash_futex(&key2); | 
 |  | 
 | retry_private: | 
 | 	hb_waiters_inc(hb2); | 
 | 	double_lock_hb(hb1, hb2); | 
 |  | 
 | 	if (likely(cmpval != NULL)) { | 
 | 		u32 curval; | 
 |  | 
 | 		ret = get_futex_value_locked(&curval, uaddr1); | 
 |  | 
 | 		if (unlikely(ret)) { | 
 | 			double_unlock_hb(hb1, hb2); | 
 | 			hb_waiters_dec(hb2); | 
 |  | 
 | 			ret = get_user(curval, uaddr1); | 
 | 			if (ret) | 
 | 				goto out_put_keys; | 
 |  | 
 | 			if (!(flags & FLAGS_SHARED)) | 
 | 				goto retry_private; | 
 |  | 
 | 			put_futex_key(&key2); | 
 | 			put_futex_key(&key1); | 
 | 			goto retry; | 
 | 		} | 
 | 		if (curval != *cmpval) { | 
 | 			ret = -EAGAIN; | 
 | 			goto out_unlock; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (requeue_pi && (task_count - nr_wake < nr_requeue)) { | 
 | 		struct task_struct *exiting = NULL; | 
 |  | 
 | 		/* | 
 | 		 * Attempt to acquire uaddr2 and wake the top waiter. If we | 
 | 		 * intend to requeue waiters, force setting the FUTEX_WAITERS | 
 | 		 * bit.  We force this here where we are able to easily handle | 
 | 		 * faults rather in the requeue loop below. | 
 | 		 */ | 
 | 		ret = futex_proxy_trylock_atomic(uaddr2, hb1, hb2, &key1, | 
 | 						 &key2, &pi_state, | 
 | 						 &exiting, nr_requeue); | 
 |  | 
 | 		/* | 
 | 		 * At this point the top_waiter has either taken uaddr2 or is | 
 | 		 * waiting on it.  If the former, then the pi_state will not | 
 | 		 * exist yet, look it up one more time to ensure we have a | 
 | 		 * reference to it. If the lock was taken, ret contains the | 
 | 		 * vpid of the top waiter task. | 
 | 		 * If the lock was not taken, we have pi_state and an initial | 
 | 		 * refcount on it. In case of an error we have nothing. | 
 | 		 */ | 
 | 		if (ret > 0) { | 
 | 			WARN_ON(pi_state); | 
 | 			drop_count++; | 
 | 			task_count++; | 
 | 			/* | 
 | 			 * If we acquired the lock, then the user space value | 
 | 			 * of uaddr2 should be vpid. It cannot be changed by | 
 | 			 * the top waiter as it is blocked on hb2 lock if it | 
 | 			 * tries to do so. If something fiddled with it behind | 
 | 			 * our back the pi state lookup might unearth it. So | 
 | 			 * we rather use the known value than rereading and | 
 | 			 * handing potential crap to lookup_pi_state. | 
 | 			 * | 
 | 			 * If that call succeeds then we have pi_state and an | 
 | 			 * initial refcount on it. | 
 | 			 */ | 
 | 			ret = lookup_pi_state(uaddr2, ret, hb2, &key2, | 
 | 					      &pi_state, &exiting); | 
 | 		} | 
 |  | 
 | 		switch (ret) { | 
 | 		case 0: | 
 | 			/* We hold a reference on the pi state. */ | 
 | 			break; | 
 |  | 
 | 			/* If the above failed, then pi_state is NULL */ | 
 | 		case -EFAULT: | 
 | 			double_unlock_hb(hb1, hb2); | 
 | 			hb_waiters_dec(hb2); | 
 | 			put_futex_key(&key2); | 
 | 			put_futex_key(&key1); | 
 | 			ret = fault_in_user_writeable(uaddr2); | 
 | 			if (!ret) | 
 | 				goto retry; | 
 | 			goto out; | 
 | 		case -EBUSY: | 
 | 		case -EAGAIN: | 
 | 			/* | 
 | 			 * Two reasons for this: | 
 | 			 * - EBUSY: Owner is exiting and we just wait for the | 
 | 			 *   exit to complete. | 
 | 			 * - EAGAIN: The user space value changed. | 
 | 			 */ | 
 | 			double_unlock_hb(hb1, hb2); | 
 | 			hb_waiters_dec(hb2); | 
 | 			put_futex_key(&key2); | 
 | 			put_futex_key(&key1); | 
 | 			/* | 
 | 			 * Handle the case where the owner is in the middle of | 
 | 			 * exiting. Wait for the exit to complete otherwise | 
 | 			 * this task might loop forever, aka. live lock. | 
 | 			 */ | 
 | 			wait_for_owner_exiting(ret, exiting); | 
 | 			cond_resched(); | 
 | 			goto retry; | 
 | 		default: | 
 | 			goto out_unlock; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	plist_for_each_entry_safe(this, next, &hb1->chain, list) { | 
 | 		if (task_count - nr_wake >= nr_requeue) | 
 | 			break; | 
 |  | 
 | 		if (!match_futex(&this->key, &key1)) | 
 | 			continue; | 
 |  | 
 | 		/* | 
 | 		 * FUTEX_WAIT_REQEUE_PI and FUTEX_CMP_REQUEUE_PI should always | 
 | 		 * be paired with each other and no other futex ops. | 
 | 		 * | 
 | 		 * We should never be requeueing a futex_q with a pi_state, | 
 | 		 * which is awaiting a futex_unlock_pi(). | 
 | 		 */ | 
 | 		if ((requeue_pi && !this->rt_waiter) || | 
 | 		    (!requeue_pi && this->rt_waiter) || | 
 | 		    this->pi_state) { | 
 | 			ret = -EINVAL; | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		/* | 
 | 		 * Wake nr_wake waiters.  For requeue_pi, if we acquired the | 
 | 		 * lock, we already woke the top_waiter.  If not, it will be | 
 | 		 * woken by futex_unlock_pi(). | 
 | 		 */ | 
 | 		if (++task_count <= nr_wake && !requeue_pi) { | 
 | 			mark_wake_futex(&wake_q, this); | 
 | 			continue; | 
 | 		} | 
 |  | 
 | 		/* Ensure we requeue to the expected futex for requeue_pi. */ | 
 | 		if (requeue_pi && !match_futex(this->requeue_pi_key, &key2)) { | 
 | 			ret = -EINVAL; | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		/* | 
 | 		 * Requeue nr_requeue waiters and possibly one more in the case | 
 | 		 * of requeue_pi if we couldn't acquire the lock atomically. | 
 | 		 */ | 
 | 		if (requeue_pi) { | 
 | 			/* | 
 | 			 * Prepare the waiter to take the rt_mutex. Take a | 
 | 			 * refcount on the pi_state and store the pointer in | 
 | 			 * the futex_q object of the waiter. | 
 | 			 */ | 
 | 			get_pi_state(pi_state); | 
 | 			this->pi_state = pi_state; | 
 | 			ret = rt_mutex_start_proxy_lock(&pi_state->pi_mutex, | 
 | 							this->rt_waiter, | 
 | 							this->task); | 
 | 			if (ret == 1) { | 
 | 				/* | 
 | 				 * We got the lock. We do neither drop the | 
 | 				 * refcount on pi_state nor clear | 
 | 				 * this->pi_state because the waiter needs the | 
 | 				 * pi_state for cleaning up the user space | 
 | 				 * value. It will drop the refcount after | 
 | 				 * doing so. | 
 | 				 */ | 
 | 				requeue_pi_wake_futex(this, &key2, hb2); | 
 | 				drop_count++; | 
 | 				continue; | 
 | 			} else if (ret) { | 
 | 				/* | 
 | 				 * rt_mutex_start_proxy_lock() detected a | 
 | 				 * potential deadlock when we tried to queue | 
 | 				 * that waiter. Drop the pi_state reference | 
 | 				 * which we took above and remove the pointer | 
 | 				 * to the state from the waiters futex_q | 
 | 				 * object. | 
 | 				 */ | 
 | 				this->pi_state = NULL; | 
 | 				put_pi_state(pi_state); | 
 | 				/* | 
 | 				 * We stop queueing more waiters and let user | 
 | 				 * space deal with the mess. | 
 | 				 */ | 
 | 				break; | 
 | 			} | 
 | 		} | 
 | 		requeue_futex(this, hb1, hb2, &key2); | 
 | 		drop_count++; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * We took an extra initial reference to the pi_state either | 
 | 	 * in futex_proxy_trylock_atomic() or in lookup_pi_state(). We | 
 | 	 * need to drop it here again. | 
 | 	 */ | 
 | 	put_pi_state(pi_state); | 
 |  | 
 | out_unlock: | 
 | 	double_unlock_hb(hb1, hb2); | 
 | 	wake_up_q(&wake_q); | 
 | 	hb_waiters_dec(hb2); | 
 |  | 
 | 	/* | 
 | 	 * drop_futex_key_refs() must be called outside the spinlocks. During | 
 | 	 * the requeue we moved futex_q's from the hash bucket at key1 to the | 
 | 	 * one at key2 and updated their key pointer.  We no longer need to | 
 | 	 * hold the references to key1. | 
 | 	 */ | 
 | 	while (--drop_count >= 0) | 
 | 		drop_futex_key_refs(&key1); | 
 |  | 
 | out_put_keys: | 
 | 	put_futex_key(&key2); | 
 | out_put_key1: | 
 | 	put_futex_key(&key1); | 
 | out: | 
 | 	return ret ? ret : task_count; | 
 | } | 
 |  | 
 | /* The key must be already stored in q->key. */ | 
 | static inline struct futex_hash_bucket *queue_lock(struct futex_q *q) | 
 | 	__acquires(&hb->lock) | 
 | { | 
 | 	struct futex_hash_bucket *hb; | 
 |  | 
 | 	hb = hash_futex(&q->key); | 
 |  | 
 | 	/* | 
 | 	 * Increment the counter before taking the lock so that | 
 | 	 * a potential waker won't miss a to-be-slept task that is | 
 | 	 * waiting for the spinlock. This is safe as all queue_lock() | 
 | 	 * users end up calling queue_me(). Similarly, for housekeeping, | 
 | 	 * decrement the counter at queue_unlock() when some error has | 
 | 	 * occurred and we don't end up adding the task to the list. | 
 | 	 */ | 
 | 	hb_waiters_inc(hb); /* implies smp_mb(); (A) */ | 
 |  | 
 | 	q->lock_ptr = &hb->lock; | 
 |  | 
 | 	spin_lock(&hb->lock); | 
 | 	return hb; | 
 | } | 
 |  | 
 | static inline void | 
 | queue_unlock(struct futex_hash_bucket *hb) | 
 | 	__releases(&hb->lock) | 
 | { | 
 | 	spin_unlock(&hb->lock); | 
 | 	hb_waiters_dec(hb); | 
 | } | 
 |  | 
 | static inline void __queue_me(struct futex_q *q, struct futex_hash_bucket *hb) | 
 | { | 
 | 	int prio; | 
 | 	bool already_on_hb = false; | 
 |  | 
 | 	/* | 
 | 	 * The priority used to register this element is | 
 | 	 * - either the real thread-priority for the real-time threads | 
 | 	 * (i.e. threads with a priority lower than MAX_RT_PRIO) | 
 | 	 * - or MAX_RT_PRIO for non-RT threads. | 
 | 	 * Thus, all RT-threads are woken first in priority order, and | 
 | 	 * the others are woken last, in FIFO order. | 
 | 	 */ | 
 | 	prio = min(current->normal_prio, MAX_RT_PRIO); | 
 |  | 
 | 	plist_node_init(&q->list, prio); | 
 | 	trace_android_vh_alter_futex_plist_add(&q->list, &hb->chain, &already_on_hb); | 
 | 	if (!already_on_hb) | 
 | 		plist_add(&q->list, &hb->chain); | 
 | 	q->task = current; | 
 | } | 
 |  | 
 | /** | 
 |  * queue_me() - Enqueue the futex_q on the futex_hash_bucket | 
 |  * @q:	The futex_q to enqueue | 
 |  * @hb:	The destination hash bucket | 
 |  * | 
 |  * The hb->lock must be held by the caller, and is released here. A call to | 
 |  * queue_me() is typically paired with exactly one call to unqueue_me().  The | 
 |  * exceptions involve the PI related operations, which may use unqueue_me_pi() | 
 |  * or nothing if the unqueue is done as part of the wake process and the unqueue | 
 |  * state is implicit in the state of woken task (see futex_wait_requeue_pi() for | 
 |  * an example). | 
 |  */ | 
 | static inline void queue_me(struct futex_q *q, struct futex_hash_bucket *hb) | 
 | 	__releases(&hb->lock) | 
 | { | 
 | 	__queue_me(q, hb); | 
 | 	spin_unlock(&hb->lock); | 
 | } | 
 |  | 
 | /** | 
 |  * unqueue_me() - Remove the futex_q from its futex_hash_bucket | 
 |  * @q:	The futex_q to unqueue | 
 |  * | 
 |  * The q->lock_ptr must not be held by the caller. A call to unqueue_me() must | 
 |  * be paired with exactly one earlier call to queue_me(). | 
 |  * | 
 |  * Return: | 
 |  *  - 1 - if the futex_q was still queued (and we removed unqueued it); | 
 |  *  - 0 - if the futex_q was already removed by the waking thread | 
 |  */ | 
 | static int unqueue_me(struct futex_q *q) | 
 | { | 
 | 	spinlock_t *lock_ptr; | 
 | 	int ret = 0; | 
 |  | 
 | 	/* In the common case we don't take the spinlock, which is nice. */ | 
 | retry: | 
 | 	/* | 
 | 	 * q->lock_ptr can change between this read and the following spin_lock. | 
 | 	 * Use READ_ONCE to forbid the compiler from reloading q->lock_ptr and | 
 | 	 * optimizing lock_ptr out of the logic below. | 
 | 	 */ | 
 | 	lock_ptr = READ_ONCE(q->lock_ptr); | 
 | 	if (lock_ptr != NULL) { | 
 | 		spin_lock(lock_ptr); | 
 | 		/* | 
 | 		 * q->lock_ptr can change between reading it and | 
 | 		 * spin_lock(), causing us to take the wrong lock.  This | 
 | 		 * corrects the race condition. | 
 | 		 * | 
 | 		 * Reasoning goes like this: if we have the wrong lock, | 
 | 		 * q->lock_ptr must have changed (maybe several times) | 
 | 		 * between reading it and the spin_lock().  It can | 
 | 		 * change again after the spin_lock() but only if it was | 
 | 		 * already changed before the spin_lock().  It cannot, | 
 | 		 * however, change back to the original value.  Therefore | 
 | 		 * we can detect whether we acquired the correct lock. | 
 | 		 */ | 
 | 		if (unlikely(lock_ptr != q->lock_ptr)) { | 
 | 			spin_unlock(lock_ptr); | 
 | 			goto retry; | 
 | 		} | 
 | 		__unqueue_futex(q); | 
 |  | 
 | 		BUG_ON(q->pi_state); | 
 |  | 
 | 		spin_unlock(lock_ptr); | 
 | 		ret = 1; | 
 | 	} | 
 |  | 
 | 	drop_futex_key_refs(&q->key); | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* | 
 |  * PI futexes can not be requeued and must remove themself from the | 
 |  * hash bucket. The hash bucket lock (i.e. lock_ptr) is held on entry | 
 |  * and dropped here. | 
 |  */ | 
 | static void unqueue_me_pi(struct futex_q *q) | 
 | 	__releases(q->lock_ptr) | 
 | { | 
 | 	__unqueue_futex(q); | 
 |  | 
 | 	BUG_ON(!q->pi_state); | 
 | 	put_pi_state(q->pi_state); | 
 | 	q->pi_state = NULL; | 
 |  | 
 | 	spin_unlock(q->lock_ptr); | 
 | } | 
 |  | 
 | static int __fixup_pi_state_owner(u32 __user *uaddr, struct futex_q *q, | 
 | 				  struct task_struct *argowner) | 
 | { | 
 | 	u32 uval, uninitialized_var(curval), newval, newtid; | 
 | 	struct futex_pi_state *pi_state = q->pi_state; | 
 | 	struct task_struct *oldowner, *newowner; | 
 | 	int err = 0; | 
 |  | 
 | 	oldowner = pi_state->owner; | 
 |  | 
 | 	/* | 
 | 	 * We are here because either: | 
 | 	 * | 
 | 	 *  - we stole the lock and pi_state->owner needs updating to reflect | 
 | 	 *    that (@argowner == current), | 
 | 	 * | 
 | 	 * or: | 
 | 	 * | 
 | 	 *  - someone stole our lock and we need to fix things to point to the | 
 | 	 *    new owner (@argowner == NULL). | 
 | 	 * | 
 | 	 * Either way, we have to replace the TID in the user space variable. | 
 | 	 * This must be atomic as we have to preserve the owner died bit here. | 
 | 	 * | 
 | 	 * Note: We write the user space value _before_ changing the pi_state | 
 | 	 * because we can fault here. Imagine swapped out pages or a fork | 
 | 	 * that marked all the anonymous memory readonly for cow. | 
 | 	 * | 
 | 	 * Modifying pi_state _before_ the user space value would leave the | 
 | 	 * pi_state in an inconsistent state when we fault here, because we | 
 | 	 * need to drop the locks to handle the fault. This might be observed | 
 | 	 * in the PID check in lookup_pi_state. | 
 | 	 */ | 
 | retry: | 
 | 	if (!argowner) { | 
 | 		if (oldowner != current) { | 
 | 			/* | 
 | 			 * We raced against a concurrent self; things are | 
 | 			 * already fixed up. Nothing to do. | 
 | 			 */ | 
 | 			return 0; | 
 | 		} | 
 |  | 
 | 		if (__rt_mutex_futex_trylock(&pi_state->pi_mutex)) { | 
 | 			/* We got the lock. pi_state is correct. Tell caller. */ | 
 | 			return 1; | 
 | 		} | 
 |  | 
 | 		/* | 
 | 		 * The trylock just failed, so either there is an owner or | 
 | 		 * there is a higher priority waiter than this one. | 
 | 		 */ | 
 | 		newowner = rt_mutex_owner(&pi_state->pi_mutex); | 
 | 		/* | 
 | 		 * If the higher priority waiter has not yet taken over the | 
 | 		 * rtmutex then newowner is NULL. We can't return here with | 
 | 		 * that state because it's inconsistent vs. the user space | 
 | 		 * state. So drop the locks and try again. It's a valid | 
 | 		 * situation and not any different from the other retry | 
 | 		 * conditions. | 
 | 		 */ | 
 | 		if (unlikely(!newowner)) { | 
 | 			err = -EAGAIN; | 
 | 			goto handle_err; | 
 | 		} | 
 | 	} else { | 
 | 		WARN_ON_ONCE(argowner != current); | 
 | 		if (oldowner == current) { | 
 | 			/* | 
 | 			 * We raced against a concurrent self; things are | 
 | 			 * already fixed up. Nothing to do. | 
 | 			 */ | 
 | 			return 1; | 
 | 		} | 
 | 		newowner = argowner; | 
 | 	} | 
 |  | 
 | 	newtid = task_pid_vnr(newowner) | FUTEX_WAITERS; | 
 | 	/* Owner died? */ | 
 | 	if (!pi_state->owner) | 
 | 		newtid |= FUTEX_OWNER_DIED; | 
 |  | 
 | 	err = get_futex_value_locked(&uval, uaddr); | 
 | 	if (err) | 
 | 		goto handle_err; | 
 |  | 
 | 	for (;;) { | 
 | 		newval = (uval & FUTEX_OWNER_DIED) | newtid; | 
 |  | 
 | 		err = cmpxchg_futex_value_locked(&curval, uaddr, uval, newval); | 
 | 		if (err) | 
 | 			goto handle_err; | 
 |  | 
 | 		if (curval == uval) | 
 | 			break; | 
 | 		uval = curval; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * We fixed up user space. Now we need to fix the pi_state | 
 | 	 * itself. | 
 | 	 */ | 
 | 	pi_state_update_owner(pi_state, newowner); | 
 |  | 
 | 	return argowner == current; | 
 |  | 
 | 	/* | 
 | 	 * In order to reschedule or handle a page fault, we need to drop the | 
 | 	 * locks here. In the case of a fault, this gives the other task | 
 | 	 * (either the highest priority waiter itself or the task which stole | 
 | 	 * the rtmutex) the chance to try the fixup of the pi_state. So once we | 
 | 	 * are back from handling the fault we need to check the pi_state after | 
 | 	 * reacquiring the locks and before trying to do another fixup. When | 
 | 	 * the fixup has been done already we simply return. | 
 | 	 * | 
 | 	 * Note: we hold both hb->lock and pi_mutex->wait_lock. We can safely | 
 | 	 * drop hb->lock since the caller owns the hb -> futex_q relation. | 
 | 	 * Dropping the pi_mutex->wait_lock requires the state revalidate. | 
 | 	 */ | 
 | handle_err: | 
 | 	raw_spin_unlock_irq(&pi_state->pi_mutex.wait_lock); | 
 | 	spin_unlock(q->lock_ptr); | 
 |  | 
 | 	switch (err) { | 
 | 	case -EFAULT: | 
 | 		err = fault_in_user_writeable(uaddr); | 
 | 		break; | 
 |  | 
 | 	case -EAGAIN: | 
 | 		cond_resched(); | 
 | 		err = 0; | 
 | 		break; | 
 |  | 
 | 	default: | 
 | 		WARN_ON_ONCE(1); | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	spin_lock(q->lock_ptr); | 
 | 	raw_spin_lock_irq(&pi_state->pi_mutex.wait_lock); | 
 |  | 
 | 	/* | 
 | 	 * Check if someone else fixed it for us: | 
 | 	 */ | 
 | 	if (pi_state->owner != oldowner) | 
 | 		return argowner == current; | 
 |  | 
 | 	/* Retry if err was -EAGAIN or the fault in succeeded */ | 
 | 	if (!err) | 
 | 		goto retry; | 
 |  | 
 | 	/* | 
 | 	 * fault_in_user_writeable() failed so user state is immutable. At | 
 | 	 * best we can make the kernel state consistent but user state will | 
 | 	 * be most likely hosed and any subsequent unlock operation will be | 
 | 	 * rejected due to PI futex rule [10]. | 
 | 	 * | 
 | 	 * Ensure that the rtmutex owner is also the pi_state owner despite | 
 | 	 * the user space value claiming something different. There is no | 
 | 	 * point in unlocking the rtmutex if current is the owner as it | 
 | 	 * would need to wait until the next waiter has taken the rtmutex | 
 | 	 * to guarantee consistent state. Keep it simple. Userspace asked | 
 | 	 * for this wreckaged state. | 
 | 	 * | 
 | 	 * The rtmutex has an owner - either current or some other | 
 | 	 * task. See the EAGAIN loop above. | 
 | 	 */ | 
 | 	pi_state_update_owner(pi_state, rt_mutex_owner(&pi_state->pi_mutex)); | 
 |  | 
 | 	return err; | 
 | } | 
 |  | 
 | static int fixup_pi_state_owner(u32 __user *uaddr, struct futex_q *q, | 
 | 				struct task_struct *argowner) | 
 | { | 
 | 	struct futex_pi_state *pi_state = q->pi_state; | 
 | 	int ret; | 
 |  | 
 | 	lockdep_assert_held(q->lock_ptr); | 
 |  | 
 | 	raw_spin_lock_irq(&pi_state->pi_mutex.wait_lock); | 
 | 	ret = __fixup_pi_state_owner(uaddr, q, argowner); | 
 | 	raw_spin_unlock_irq(&pi_state->pi_mutex.wait_lock); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static long futex_wait_restart(struct restart_block *restart); | 
 |  | 
 | /** | 
 |  * fixup_owner() - Post lock pi_state and corner case management | 
 |  * @uaddr:	user address of the futex | 
 |  * @q:		futex_q (contains pi_state and access to the rt_mutex) | 
 |  * @locked:	if the attempt to take the rt_mutex succeeded (1) or not (0) | 
 |  * | 
 |  * After attempting to lock an rt_mutex, this function is called to cleanup | 
 |  * the pi_state owner as well as handle race conditions that may allow us to | 
 |  * acquire the lock. Must be called with the hb lock held. | 
 |  * | 
 |  * Return: | 
 |  *  -  1 - success, lock taken; | 
 |  *  -  0 - success, lock not taken; | 
 |  *  - <0 - on error (-EFAULT) | 
 |  */ | 
 | static int fixup_owner(u32 __user *uaddr, struct futex_q *q, int locked) | 
 | { | 
 | 	if (locked) { | 
 | 		/* | 
 | 		 * Got the lock. We might not be the anticipated owner if we | 
 | 		 * did a lock-steal - fix up the PI-state in that case: | 
 | 		 * | 
 | 		 * Speculative pi_state->owner read (we don't hold wait_lock); | 
 | 		 * since we own the lock pi_state->owner == current is the | 
 | 		 * stable state, anything else needs more attention. | 
 | 		 */ | 
 | 		if (q->pi_state->owner != current) | 
 | 			return fixup_pi_state_owner(uaddr, q, current); | 
 | 		return 1; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * If we didn't get the lock; check if anybody stole it from us. In | 
 | 	 * that case, we need to fix up the uval to point to them instead of | 
 | 	 * us, otherwise bad things happen. [10] | 
 | 	 * | 
 | 	 * Another speculative read; pi_state->owner == current is unstable | 
 | 	 * but needs our attention. | 
 | 	 */ | 
 | 	if (q->pi_state->owner == current) | 
 | 		return fixup_pi_state_owner(uaddr, q, NULL); | 
 |  | 
 | 	/* | 
 | 	 * Paranoia check. If we did not take the lock, then we should not be | 
 | 	 * the owner of the rt_mutex. Warn and establish consistent state. | 
 | 	 */ | 
 | 	if (WARN_ON_ONCE(rt_mutex_owner(&q->pi_state->pi_mutex) == current)) | 
 | 		return fixup_pi_state_owner(uaddr, q, current); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /** | 
 |  * futex_wait_queue_me() - queue_me() and wait for wakeup, timeout, or signal | 
 |  * @hb:		the futex hash bucket, must be locked by the caller | 
 |  * @q:		the futex_q to queue up on | 
 |  * @timeout:	the prepared hrtimer_sleeper, or null for no timeout | 
 |  */ | 
 | static void futex_wait_queue_me(struct futex_hash_bucket *hb, struct futex_q *q, | 
 | 				struct hrtimer_sleeper *timeout) | 
 | { | 
 | 	/* | 
 | 	 * The task state is guaranteed to be set before another task can | 
 | 	 * wake it. set_current_state() is implemented using smp_store_mb() and | 
 | 	 * queue_me() calls spin_unlock() upon completion, both serializing | 
 | 	 * access to the hash list and forcing another memory barrier. | 
 | 	 */ | 
 | 	set_current_state(TASK_INTERRUPTIBLE); | 
 | 	queue_me(q, hb); | 
 |  | 
 | 	/* Arm the timer */ | 
 | 	if (timeout) | 
 | 		hrtimer_sleeper_start_expires(timeout, HRTIMER_MODE_ABS); | 
 |  | 
 | 	/* | 
 | 	 * If we have been removed from the hash list, then another task | 
 | 	 * has tried to wake us, and we can skip the call to schedule(). | 
 | 	 */ | 
 | 	if (likely(!plist_node_empty(&q->list))) { | 
 | 		/* | 
 | 		 * If the timer has already expired, current will already be | 
 | 		 * flagged for rescheduling. Only call schedule if there | 
 | 		 * is no timeout, or if it has yet to expire. | 
 | 		 */ | 
 | 		if (!timeout || timeout->task) | 
 | 			freezable_schedule(); | 
 | 	} | 
 | 	__set_current_state(TASK_RUNNING); | 
 | } | 
 |  | 
 | /** | 
 |  * futex_wait_setup() - Prepare to wait on a futex | 
 |  * @uaddr:	the futex userspace address | 
 |  * @val:	the expected value | 
 |  * @flags:	futex flags (FLAGS_SHARED, etc.) | 
 |  * @q:		the associated futex_q | 
 |  * @hb:		storage for hash_bucket pointer to be returned to caller | 
 |  * | 
 |  * Setup the futex_q and locate the hash_bucket.  Get the futex value and | 
 |  * compare it with the expected value.  Handle atomic faults internally. | 
 |  * Return with the hb lock held and a q.key reference on success, and unlocked | 
 |  * with no q.key reference on failure. | 
 |  * | 
 |  * Return: | 
 |  *  -  0 - uaddr contains val and hb has been locked; | 
 |  *  - <1 - -EFAULT or -EWOULDBLOCK (uaddr does not contain val) and hb is unlocked | 
 |  */ | 
 | static int futex_wait_setup(u32 __user *uaddr, u32 val, unsigned int flags, | 
 | 			   struct futex_q *q, struct futex_hash_bucket **hb) | 
 | { | 
 | 	u32 uval; | 
 | 	int ret; | 
 |  | 
 | 	/* | 
 | 	 * Access the page AFTER the hash-bucket is locked. | 
 | 	 * Order is important: | 
 | 	 * | 
 | 	 *   Userspace waiter: val = var; if (cond(val)) futex_wait(&var, val); | 
 | 	 *   Userspace waker:  if (cond(var)) { var = new; futex_wake(&var); } | 
 | 	 * | 
 | 	 * The basic logical guarantee of a futex is that it blocks ONLY | 
 | 	 * if cond(var) is known to be true at the time of blocking, for | 
 | 	 * any cond.  If we locked the hash-bucket after testing *uaddr, that | 
 | 	 * would open a race condition where we could block indefinitely with | 
 | 	 * cond(var) false, which would violate the guarantee. | 
 | 	 * | 
 | 	 * On the other hand, we insert q and release the hash-bucket only | 
 | 	 * after testing *uaddr.  This guarantees that futex_wait() will NOT | 
 | 	 * absorb a wakeup if *uaddr does not match the desired values | 
 | 	 * while the syscall executes. | 
 | 	 */ | 
 | retry: | 
 | 	ret = get_futex_key(uaddr, flags & FLAGS_SHARED, &q->key, FUTEX_READ); | 
 | 	if (unlikely(ret != 0)) | 
 | 		return ret; | 
 |  | 
 | retry_private: | 
 | 	*hb = queue_lock(q); | 
 |  | 
 | 	ret = get_futex_value_locked(&uval, uaddr); | 
 |  | 
 | 	if (ret) { | 
 | 		queue_unlock(*hb); | 
 |  | 
 | 		ret = get_user(uval, uaddr); | 
 | 		if (ret) | 
 | 			goto out; | 
 |  | 
 | 		if (!(flags & FLAGS_SHARED)) | 
 | 			goto retry_private; | 
 |  | 
 | 		put_futex_key(&q->key); | 
 | 		goto retry; | 
 | 	} | 
 |  | 
 | 	if (uval != val) { | 
 | 		queue_unlock(*hb); | 
 | 		ret = -EWOULDBLOCK; | 
 | 	} | 
 |  | 
 | out: | 
 | 	if (ret) | 
 | 		put_futex_key(&q->key); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int futex_wait(u32 __user *uaddr, unsigned int flags, u32 val, | 
 | 		      ktime_t *abs_time, u32 bitset) | 
 | { | 
 | 	struct hrtimer_sleeper timeout, *to; | 
 | 	struct restart_block *restart; | 
 | 	struct futex_hash_bucket *hb; | 
 | 	struct futex_q q = futex_q_init; | 
 | 	int ret; | 
 |  | 
 | 	if (!bitset) | 
 | 		return -EINVAL; | 
 | 	q.bitset = bitset; | 
 |  | 
 | 	to = futex_setup_timer(abs_time, &timeout, flags, | 
 | 			       current->timer_slack_ns); | 
 | retry: | 
 | 	/* | 
 | 	 * Prepare to wait on uaddr. On success, holds hb lock and increments | 
 | 	 * q.key refs. | 
 | 	 */ | 
 | 	ret = futex_wait_setup(uaddr, val, flags, &q, &hb); | 
 | 	if (ret) | 
 | 		goto out; | 
 |  | 
 | 	/* queue_me and wait for wakeup, timeout, or a signal. */ | 
 | 	futex_wait_queue_me(hb, &q, to); | 
 |  | 
 | 	/* If we were woken (and unqueued), we succeeded, whatever. */ | 
 | 	ret = 0; | 
 | 	/* unqueue_me() drops q.key ref */ | 
 | 	if (!unqueue_me(&q)) | 
 | 		goto out; | 
 | 	ret = -ETIMEDOUT; | 
 | 	if (to && !to->task) | 
 | 		goto out; | 
 |  | 
 | 	/* | 
 | 	 * We expect signal_pending(current), but we might be the | 
 | 	 * victim of a spurious wakeup as well. | 
 | 	 */ | 
 | 	if (!signal_pending(current)) | 
 | 		goto retry; | 
 |  | 
 | 	ret = -ERESTARTSYS; | 
 | 	if (!abs_time) | 
 | 		goto out; | 
 |  | 
 | 	restart = ¤t->restart_block; | 
 | 	restart->futex.uaddr = uaddr; | 
 | 	restart->futex.val = val; | 
 | 	restart->futex.time = *abs_time; | 
 | 	restart->futex.bitset = bitset; | 
 | 	restart->futex.flags = flags | FLAGS_HAS_TIMEOUT; | 
 |  | 
 | 	ret = set_restart_fn(restart, futex_wait_restart); | 
 |  | 
 | out: | 
 | 	if (to) { | 
 | 		hrtimer_cancel(&to->timer); | 
 | 		destroy_hrtimer_on_stack(&to->timer); | 
 | 	} | 
 | 	return ret; | 
 | } | 
 |  | 
 |  | 
 | static long futex_wait_restart(struct restart_block *restart) | 
 | { | 
 | 	u32 __user *uaddr = restart->futex.uaddr; | 
 | 	ktime_t t, *tp = NULL; | 
 |  | 
 | 	if (restart->futex.flags & FLAGS_HAS_TIMEOUT) { | 
 | 		t = restart->futex.time; | 
 | 		tp = &t; | 
 | 	} | 
 | 	restart->fn = do_no_restart_syscall; | 
 |  | 
 | 	return (long)futex_wait(uaddr, restart->futex.flags, | 
 | 				restart->futex.val, tp, restart->futex.bitset); | 
 | } | 
 |  | 
 |  | 
 | /* | 
 |  * Userspace tried a 0 -> TID atomic transition of the futex value | 
 |  * and failed. The kernel side here does the whole locking operation: | 
 |  * if there are waiters then it will block as a consequence of relying | 
 |  * on rt-mutexes, it does PI, etc. (Due to races the kernel might see | 
 |  * a 0 value of the futex too.). | 
 |  * | 
 |  * Also serves as futex trylock_pi()'ing, and due semantics. | 
 |  */ | 
 | static int futex_lock_pi(u32 __user *uaddr, unsigned int flags, | 
 | 			 ktime_t *time, int trylock) | 
 | { | 
 | 	struct hrtimer_sleeper timeout, *to; | 
 | 	struct task_struct *exiting = NULL; | 
 | 	struct rt_mutex_waiter rt_waiter; | 
 | 	struct futex_hash_bucket *hb; | 
 | 	struct futex_q q = futex_q_init; | 
 | 	int res, ret; | 
 |  | 
 | 	if (!IS_ENABLED(CONFIG_FUTEX_PI)) | 
 | 		return -ENOSYS; | 
 |  | 
 | 	if (refill_pi_state_cache()) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	to = futex_setup_timer(time, &timeout, FLAGS_CLOCKRT, 0); | 
 |  | 
 | retry: | 
 | 	ret = get_futex_key(uaddr, flags & FLAGS_SHARED, &q.key, FUTEX_WRITE); | 
 | 	if (unlikely(ret != 0)) | 
 | 		goto out; | 
 |  | 
 | retry_private: | 
 | 	hb = queue_lock(&q); | 
 |  | 
 | 	ret = futex_lock_pi_atomic(uaddr, hb, &q.key, &q.pi_state, current, | 
 | 				   &exiting, 0); | 
 | 	if (unlikely(ret)) { | 
 | 		/* | 
 | 		 * Atomic work succeeded and we got the lock, | 
 | 		 * or failed. Either way, we do _not_ block. | 
 | 		 */ | 
 | 		switch (ret) { | 
 | 		case 1: | 
 | 			/* We got the lock. */ | 
 | 			ret = 0; | 
 | 			goto out_unlock_put_key; | 
 | 		case -EFAULT: | 
 | 			goto uaddr_faulted; | 
 | 		case -EBUSY: | 
 | 		case -EAGAIN: | 
 | 			/* | 
 | 			 * Two reasons for this: | 
 | 			 * - EBUSY: Task is exiting and we just wait for the | 
 | 			 *   exit to complete. | 
 | 			 * - EAGAIN: The user space value changed. | 
 | 			 */ | 
 | 			queue_unlock(hb); | 
 | 			put_futex_key(&q.key); | 
 | 			/* | 
 | 			 * Handle the case where the owner is in the middle of | 
 | 			 * exiting. Wait for the exit to complete otherwise | 
 | 			 * this task might loop forever, aka. live lock. | 
 | 			 */ | 
 | 			wait_for_owner_exiting(ret, exiting); | 
 | 			cond_resched(); | 
 | 			goto retry; | 
 | 		default: | 
 | 			goto out_unlock_put_key; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	WARN_ON(!q.pi_state); | 
 |  | 
 | 	/* | 
 | 	 * Only actually queue now that the atomic ops are done: | 
 | 	 */ | 
 | 	__queue_me(&q, hb); | 
 |  | 
 | 	if (trylock) { | 
 | 		ret = rt_mutex_futex_trylock(&q.pi_state->pi_mutex); | 
 | 		/* Fixup the trylock return value: */ | 
 | 		ret = ret ? 0 : -EWOULDBLOCK; | 
 | 		goto no_block; | 
 | 	} | 
 |  | 
 | 	rt_mutex_init_waiter(&rt_waiter); | 
 |  | 
 | 	/* | 
 | 	 * On PREEMPT_RT_FULL, when hb->lock becomes an rt_mutex, we must not | 
 | 	 * hold it while doing rt_mutex_start_proxy(), because then it will | 
 | 	 * include hb->lock in the blocking chain, even through we'll not in | 
 | 	 * fact hold it while blocking. This will lead it to report -EDEADLK | 
 | 	 * and BUG when futex_unlock_pi() interleaves with this. | 
 | 	 * | 
 | 	 * Therefore acquire wait_lock while holding hb->lock, but drop the | 
 | 	 * latter before calling __rt_mutex_start_proxy_lock(). This | 
 | 	 * interleaves with futex_unlock_pi() -- which does a similar lock | 
 | 	 * handoff -- such that the latter can observe the futex_q::pi_state | 
 | 	 * before __rt_mutex_start_proxy_lock() is done. | 
 | 	 */ | 
 | 	raw_spin_lock_irq(&q.pi_state->pi_mutex.wait_lock); | 
 | 	spin_unlock(q.lock_ptr); | 
 | 	/* | 
 | 	 * __rt_mutex_start_proxy_lock() unconditionally enqueues the @rt_waiter | 
 | 	 * such that futex_unlock_pi() is guaranteed to observe the waiter when | 
 | 	 * it sees the futex_q::pi_state. | 
 | 	 */ | 
 | 	ret = __rt_mutex_start_proxy_lock(&q.pi_state->pi_mutex, &rt_waiter, current); | 
 | 	raw_spin_unlock_irq(&q.pi_state->pi_mutex.wait_lock); | 
 |  | 
 | 	if (ret) { | 
 | 		if (ret == 1) | 
 | 			ret = 0; | 
 | 		goto cleanup; | 
 | 	} | 
 |  | 
 | 	if (unlikely(to)) | 
 | 		hrtimer_sleeper_start_expires(to, HRTIMER_MODE_ABS); | 
 |  | 
 | 	ret = rt_mutex_wait_proxy_lock(&q.pi_state->pi_mutex, to, &rt_waiter); | 
 |  | 
 | cleanup: | 
 | 	spin_lock(q.lock_ptr); | 
 | 	/* | 
 | 	 * If we failed to acquire the lock (deadlock/signal/timeout), we must | 
 | 	 * first acquire the hb->lock before removing the lock from the | 
 | 	 * rt_mutex waitqueue, such that we can keep the hb and rt_mutex wait | 
 | 	 * lists consistent. | 
 | 	 * | 
 | 	 * In particular; it is important that futex_unlock_pi() can not | 
 | 	 * observe this inconsistency. | 
 | 	 */ | 
 | 	if (ret && !rt_mutex_cleanup_proxy_lock(&q.pi_state->pi_mutex, &rt_waiter)) | 
 | 		ret = 0; | 
 |  | 
 | no_block: | 
 | 	/* | 
 | 	 * Fixup the pi_state owner and possibly acquire the lock if we | 
 | 	 * haven't already. | 
 | 	 */ | 
 | 	res = fixup_owner(uaddr, &q, !ret); | 
 | 	/* | 
 | 	 * If fixup_owner() returned an error, proprogate that.  If it acquired | 
 | 	 * the lock, clear our -ETIMEDOUT or -EINTR. | 
 | 	 */ | 
 | 	if (res) | 
 | 		ret = (res < 0) ? res : 0; | 
 |  | 
 | 	/* Unqueue and drop the lock */ | 
 | 	unqueue_me_pi(&q); | 
 |  | 
 | 	goto out_put_key; | 
 |  | 
 | out_unlock_put_key: | 
 | 	queue_unlock(hb); | 
 |  | 
 | out_put_key: | 
 | 	put_futex_key(&q.key); | 
 | out: | 
 | 	if (to) { | 
 | 		hrtimer_cancel(&to->timer); | 
 | 		destroy_hrtimer_on_stack(&to->timer); | 
 | 	} | 
 | 	return ret != -EINTR ? ret : -ERESTARTNOINTR; | 
 |  | 
 | uaddr_faulted: | 
 | 	queue_unlock(hb); | 
 |  | 
 | 	ret = fault_in_user_writeable(uaddr); | 
 | 	if (ret) | 
 | 		goto out_put_key; | 
 |  | 
 | 	if (!(flags & FLAGS_SHARED)) | 
 | 		goto retry_private; | 
 |  | 
 | 	put_futex_key(&q.key); | 
 | 	goto retry; | 
 | } | 
 |  | 
 | /* | 
 |  * Userspace attempted a TID -> 0 atomic transition, and failed. | 
 |  * This is the in-kernel slowpath: we look up the PI state (if any), | 
 |  * and do the rt-mutex unlock. | 
 |  */ | 
 | static int futex_unlock_pi(u32 __user *uaddr, unsigned int flags) | 
 | { | 
 | 	u32 curval, uval, vpid = task_pid_vnr(current); | 
 | 	union futex_key key = FUTEX_KEY_INIT; | 
 | 	struct futex_hash_bucket *hb; | 
 | 	struct futex_q *top_waiter; | 
 | 	int ret; | 
 |  | 
 | 	if (!IS_ENABLED(CONFIG_FUTEX_PI)) | 
 | 		return -ENOSYS; | 
 |  | 
 | retry: | 
 | 	if (get_user(uval, uaddr)) | 
 | 		return -EFAULT; | 
 | 	/* | 
 | 	 * We release only a lock we actually own: | 
 | 	 */ | 
 | 	if ((uval & FUTEX_TID_MASK) != vpid) | 
 | 		return -EPERM; | 
 |  | 
 | 	ret = get_futex_key(uaddr, flags & FLAGS_SHARED, &key, FUTEX_WRITE); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	hb = hash_futex(&key); | 
 | 	spin_lock(&hb->lock); | 
 |  | 
 | 	/* | 
 | 	 * Check waiters first. We do not trust user space values at | 
 | 	 * all and we at least want to know if user space fiddled | 
 | 	 * with the futex value instead of blindly unlocking. | 
 | 	 */ | 
 | 	top_waiter = futex_top_waiter(hb, &key); | 
 | 	if (top_waiter) { | 
 | 		struct futex_pi_state *pi_state = top_waiter->pi_state; | 
 |  | 
 | 		ret = -EINVAL; | 
 | 		if (!pi_state) | 
 | 			goto out_unlock; | 
 |  | 
 | 		/* | 
 | 		 * If current does not own the pi_state then the futex is | 
 | 		 * inconsistent and user space fiddled with the futex value. | 
 | 		 */ | 
 | 		if (pi_state->owner != current) | 
 | 			goto out_unlock; | 
 |  | 
 | 		get_pi_state(pi_state); | 
 | 		/* | 
 | 		 * By taking wait_lock while still holding hb->lock, we ensure | 
 | 		 * there is no point where we hold neither; and therefore | 
 | 		 * wake_futex_pi() must observe a state consistent with what we | 
 | 		 * observed. | 
 | 		 * | 
 | 		 * In particular; this forces __rt_mutex_start_proxy() to | 
 | 		 * complete such that we're guaranteed to observe the | 
 | 		 * rt_waiter. Also see the WARN in wake_futex_pi(). | 
 | 		 */ | 
 | 		raw_spin_lock_irq(&pi_state->pi_mutex.wait_lock); | 
 | 		spin_unlock(&hb->lock); | 
 |  | 
 | 		/* drops pi_state->pi_mutex.wait_lock */ | 
 | 		ret = wake_futex_pi(uaddr, uval, pi_state); | 
 |  | 
 | 		put_pi_state(pi_state); | 
 |  | 
 | 		/* | 
 | 		 * Success, we're done! No tricky corner cases. | 
 | 		 */ | 
 | 		if (!ret) | 
 | 			goto out_putkey; | 
 | 		/* | 
 | 		 * The atomic access to the futex value generated a | 
 | 		 * pagefault, so retry the user-access and the wakeup: | 
 | 		 */ | 
 | 		if (ret == -EFAULT) | 
 | 			goto pi_faulted; | 
 | 		/* | 
 | 		 * A unconditional UNLOCK_PI op raced against a waiter | 
 | 		 * setting the FUTEX_WAITERS bit. Try again. | 
 | 		 */ | 
 | 		if (ret == -EAGAIN) | 
 | 			goto pi_retry; | 
 | 		/* | 
 | 		 * wake_futex_pi has detected invalid state. Tell user | 
 | 		 * space. | 
 | 		 */ | 
 | 		goto out_putkey; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * We have no kernel internal state, i.e. no waiters in the | 
 | 	 * kernel. Waiters which are about to queue themselves are stuck | 
 | 	 * on hb->lock. So we can safely ignore them. We do neither | 
 | 	 * preserve the WAITERS bit not the OWNER_DIED one. We are the | 
 | 	 * owner. | 
 | 	 */ | 
 | 	if ((ret = cmpxchg_futex_value_locked(&curval, uaddr, uval, 0))) { | 
 | 		spin_unlock(&hb->lock); | 
 | 		switch (ret) { | 
 | 		case -EFAULT: | 
 | 			goto pi_faulted; | 
 |  | 
 | 		case -EAGAIN: | 
 | 			goto pi_retry; | 
 |  | 
 | 		default: | 
 | 			WARN_ON_ONCE(1); | 
 | 			goto out_putkey; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * If uval has changed, let user space handle it. | 
 | 	 */ | 
 | 	ret = (curval == uval) ? 0 : -EAGAIN; | 
 |  | 
 | out_unlock: | 
 | 	spin_unlock(&hb->lock); | 
 | out_putkey: | 
 | 	put_futex_key(&key); | 
 | 	return ret; | 
 |  | 
 | pi_retry: | 
 | 	put_futex_key(&key); | 
 | 	cond_resched(); | 
 | 	goto retry; | 
 |  | 
 | pi_faulted: | 
 | 	put_futex_key(&key); | 
 |  | 
 | 	ret = fault_in_user_writeable(uaddr); | 
 | 	if (!ret) | 
 | 		goto retry; | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | /** | 
 |  * handle_early_requeue_pi_wakeup() - Detect early wakeup on the initial futex | 
 |  * @hb:		the hash_bucket futex_q was original enqueued on | 
 |  * @q:		the futex_q woken while waiting to be requeued | 
 |  * @key2:	the futex_key of the requeue target futex | 
 |  * @timeout:	the timeout associated with the wait (NULL if none) | 
 |  * | 
 |  * Detect if the task was woken on the initial futex as opposed to the requeue | 
 |  * target futex.  If so, determine if it was a timeout or a signal that caused | 
 |  * the wakeup and return the appropriate error code to the caller.  Must be | 
 |  * called with the hb lock held. | 
 |  * | 
 |  * Return: | 
 |  *  -  0 = no early wakeup detected; | 
 |  *  - <0 = -ETIMEDOUT or -ERESTARTNOINTR | 
 |  */ | 
 | static inline | 
 | int handle_early_requeue_pi_wakeup(struct futex_hash_bucket *hb, | 
 | 				   struct futex_q *q, union futex_key *key2, | 
 | 				   struct hrtimer_sleeper *timeout) | 
 | { | 
 | 	int ret = 0; | 
 |  | 
 | 	/* | 
 | 	 * With the hb lock held, we avoid races while we process the wakeup. | 
 | 	 * We only need to hold hb (and not hb2) to ensure atomicity as the | 
 | 	 * wakeup code can't change q.key from uaddr to uaddr2 if we hold hb. | 
 | 	 * It can't be requeued from uaddr2 to something else since we don't | 
 | 	 * support a PI aware source futex for requeue. | 
 | 	 */ | 
 | 	if (!match_futex(&q->key, key2)) { | 
 | 		WARN_ON(q->lock_ptr && (&hb->lock != q->lock_ptr)); | 
 | 		/* | 
 | 		 * We were woken prior to requeue by a timeout or a signal. | 
 | 		 * Unqueue the futex_q and determine which it was. | 
 | 		 */ | 
 | 		plist_del(&q->list, &hb->chain); | 
 | 		hb_waiters_dec(hb); | 
 |  | 
 | 		/* Handle spurious wakeups gracefully */ | 
 | 		ret = -EWOULDBLOCK; | 
 | 		if (timeout && !timeout->task) | 
 | 			ret = -ETIMEDOUT; | 
 | 		else if (signal_pending(current)) | 
 | 			ret = -ERESTARTNOINTR; | 
 | 	} | 
 | 	return ret; | 
 | } | 
 |  | 
 | /** | 
 |  * futex_wait_requeue_pi() - Wait on uaddr and take uaddr2 | 
 |  * @uaddr:	the futex we initially wait on (non-pi) | 
 |  * @flags:	futex flags (FLAGS_SHARED, FLAGS_CLOCKRT, etc.), they must be | 
 |  *		the same type, no requeueing from private to shared, etc. | 
 |  * @val:	the expected value of uaddr | 
 |  * @abs_time:	absolute timeout | 
 |  * @bitset:	32 bit wakeup bitset set by userspace, defaults to all | 
 |  * @uaddr2:	the pi futex we will take prior to returning to user-space | 
 |  * | 
 |  * The caller will wait on uaddr and will be requeued by futex_requeue() to | 
 |  * uaddr2 which must be PI aware and unique from uaddr.  Normal wakeup will wake | 
 |  * on uaddr2 and complete the acquisition of the rt_mutex prior to returning to | 
 |  * userspace.  This ensures the rt_mutex maintains an owner when it has waiters; | 
 |  * without one, the pi logic would not know which task to boost/deboost, if | 
 |  * there was a need to. | 
 |  * | 
 |  * We call schedule in futex_wait_queue_me() when we enqueue and return there | 
 |  * via the following-- | 
 |  * 1) wakeup on uaddr2 after an atomic lock acquisition by futex_requeue() | 
 |  * 2) wakeup on uaddr2 after a requeue | 
 |  * 3) signal | 
 |  * 4) timeout | 
 |  * | 
 |  * If 3, cleanup and return -ERESTARTNOINTR. | 
 |  * | 
 |  * If 2, we may then block on trying to take the rt_mutex and return via: | 
 |  * 5) successful lock | 
 |  * 6) signal | 
 |  * 7) timeout | 
 |  * 8) other lock acquisition failure | 
 |  * | 
 |  * If 6, return -EWOULDBLOCK (restarting the syscall would do the same). | 
 |  * | 
 |  * If 4 or 7, we cleanup and return with -ETIMEDOUT. | 
 |  * | 
 |  * Return: | 
 |  *  -  0 - On success; | 
 |  *  - <0 - On error | 
 |  */ | 
 | static int futex_wait_requeue_pi(u32 __user *uaddr, unsigned int flags, | 
 | 				 u32 val, ktime_t *abs_time, u32 bitset, | 
 | 				 u32 __user *uaddr2) | 
 | { | 
 | 	struct hrtimer_sleeper timeout, *to; | 
 | 	struct rt_mutex_waiter rt_waiter; | 
 | 	struct futex_hash_bucket *hb; | 
 | 	union futex_key key2 = FUTEX_KEY_INIT; | 
 | 	struct futex_q q = futex_q_init; | 
 | 	int res, ret; | 
 |  | 
 | 	if (!IS_ENABLED(CONFIG_FUTEX_PI)) | 
 | 		return -ENOSYS; | 
 |  | 
 | 	if (uaddr == uaddr2) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (!bitset) | 
 | 		return -EINVAL; | 
 |  | 
 | 	to = futex_setup_timer(abs_time, &timeout, flags, | 
 | 			       current->timer_slack_ns); | 
 |  | 
 | 	/* | 
 | 	 * The waiter is allocated on our stack, manipulated by the requeue | 
 | 	 * code while we sleep on uaddr. | 
 | 	 */ | 
 | 	rt_mutex_init_waiter(&rt_waiter); | 
 |  | 
 | 	ret = get_futex_key(uaddr2, flags & FLAGS_SHARED, &key2, FUTEX_WRITE); | 
 | 	if (unlikely(ret != 0)) | 
 | 		goto out; | 
 |  | 
 | 	q.bitset = bitset; | 
 | 	q.rt_waiter = &rt_waiter; | 
 | 	q.requeue_pi_key = &key2; | 
 |  | 
 | 	/* | 
 | 	 * Prepare to wait on uaddr. On success, increments q.key (key1) ref | 
 | 	 * count. | 
 | 	 */ | 
 | 	ret = futex_wait_setup(uaddr, val, flags, &q, &hb); | 
 | 	if (ret) | 
 | 		goto out_key2; | 
 |  | 
 | 	/* | 
 | 	 * The check above which compares uaddrs is not sufficient for | 
 | 	 * shared futexes. We need to compare the keys: | 
 | 	 */ | 
 | 	if (match_futex(&q.key, &key2)) { | 
 | 		queue_unlock(hb); | 
 | 		ret = -EINVAL; | 
 | 		goto out_put_keys; | 
 | 	} | 
 |  | 
 | 	/* Queue the futex_q, drop the hb lock, wait for wakeup. */ | 
 | 	futex_wait_queue_me(hb, &q, to); | 
 |  | 
 | 	spin_lock(&hb->lock); | 
 | 	ret = handle_early_requeue_pi_wakeup(hb, &q, &key2, to); | 
 | 	spin_unlock(&hb->lock); | 
 | 	if (ret) | 
 | 		goto out_put_keys; | 
 |  | 
 | 	/* | 
 | 	 * In order for us to be here, we know our q.key == key2, and since | 
 | 	 * we took the hb->lock above, we also know that futex_requeue() has | 
 | 	 * completed and we no longer have to concern ourselves with a wakeup | 
 | 	 * race with the atomic proxy lock acquisition by the requeue code. The | 
 | 	 * futex_requeue dropped our key1 reference and incremented our key2 | 
 | 	 * reference count. | 
 | 	 */ | 
 |  | 
 | 	/* Check if the requeue code acquired the second futex for us. */ | 
 | 	if (!q.rt_waiter) { | 
 | 		/* | 
 | 		 * Got the lock. We might not be the anticipated owner if we | 
 | 		 * did a lock-steal - fix up the PI-state in that case. | 
 | 		 */ | 
 | 		if (q.pi_state && (q.pi_state->owner != current)) { | 
 | 			spin_lock(q.lock_ptr); | 
 | 			ret = fixup_pi_state_owner(uaddr2, &q, current); | 
 | 			/* | 
 | 			 * Drop the reference to the pi state which | 
 | 			 * the requeue_pi() code acquired for us. | 
 | 			 */ | 
 | 			put_pi_state(q.pi_state); | 
 | 			spin_unlock(q.lock_ptr); | 
 | 			/* | 
 | 			 * Adjust the return value. It's either -EFAULT or | 
 | 			 * success (1) but the caller expects 0 for success. | 
 | 			 */ | 
 | 			ret = ret < 0 ? ret : 0; | 
 | 		} | 
 | 	} else { | 
 | 		struct rt_mutex *pi_mutex; | 
 |  | 
 | 		/* | 
 | 		 * We have been woken up by futex_unlock_pi(), a timeout, or a | 
 | 		 * signal.  futex_unlock_pi() will not destroy the lock_ptr nor | 
 | 		 * the pi_state. | 
 | 		 */ | 
 | 		WARN_ON(!q.pi_state); | 
 | 		pi_mutex = &q.pi_state->pi_mutex; | 
 | 		ret = rt_mutex_wait_proxy_lock(pi_mutex, to, &rt_waiter); | 
 |  | 
 | 		spin_lock(q.lock_ptr); | 
 | 		if (ret && !rt_mutex_cleanup_proxy_lock(pi_mutex, &rt_waiter)) | 
 | 			ret = 0; | 
 |  | 
 | 		debug_rt_mutex_free_waiter(&rt_waiter); | 
 | 		/* | 
 | 		 * Fixup the pi_state owner and possibly acquire the lock if we | 
 | 		 * haven't already. | 
 | 		 */ | 
 | 		res = fixup_owner(uaddr2, &q, !ret); | 
 | 		/* | 
 | 		 * If fixup_owner() returned an error, proprogate that.  If it | 
 | 		 * acquired the lock, clear -ETIMEDOUT or -EINTR. | 
 | 		 */ | 
 | 		if (res) | 
 | 			ret = (res < 0) ? res : 0; | 
 |  | 
 | 		/* Unqueue and drop the lock. */ | 
 | 		unqueue_me_pi(&q); | 
 | 	} | 
 |  | 
 | 	if (ret == -EINTR) { | 
 | 		/* | 
 | 		 * We've already been requeued, but cannot restart by calling | 
 | 		 * futex_lock_pi() directly. We could restart this syscall, but | 
 | 		 * it would detect that the user space "val" changed and return | 
 | 		 * -EWOULDBLOCK.  Save the overhead of the restart and return | 
 | 		 * -EWOULDBLOCK directly. | 
 | 		 */ | 
 | 		ret = -EWOULDBLOCK; | 
 | 	} | 
 |  | 
 | out_put_keys: | 
 | 	put_futex_key(&q.key); | 
 | out_key2: | 
 | 	put_futex_key(&key2); | 
 |  | 
 | out: | 
 | 	if (to) { | 
 | 		hrtimer_cancel(&to->timer); | 
 | 		destroy_hrtimer_on_stack(&to->timer); | 
 | 	} | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* | 
 |  * Support for robust futexes: the kernel cleans up held futexes at | 
 |  * thread exit time. | 
 |  * | 
 |  * Implementation: user-space maintains a per-thread list of locks it | 
 |  * is holding. Upon do_exit(), the kernel carefully walks this list, | 
 |  * and marks all locks that are owned by this thread with the | 
 |  * FUTEX_OWNER_DIED bit, and wakes up a waiter (if any). The list is | 
 |  * always manipulated with the lock held, so the list is private and | 
 |  * per-thread. Userspace also maintains a per-thread 'list_op_pending' | 
 |  * field, to allow the kernel to clean up if the thread dies after | 
 |  * acquiring the lock, but just before it could have added itself to | 
 |  * the list. There can only be one such pending lock. | 
 |  */ | 
 |  | 
 | /** | 
 |  * sys_set_robust_list() - Set the robust-futex list head of a task | 
 |  * @head:	pointer to the list-head | 
 |  * @len:	length of the list-head, as userspace expects | 
 |  */ | 
 | SYSCALL_DEFINE2(set_robust_list, struct robust_list_head __user *, head, | 
 | 		size_t, len) | 
 | { | 
 | 	if (!futex_cmpxchg_enabled) | 
 | 		return -ENOSYS; | 
 | 	/* | 
 | 	 * The kernel knows only one size for now: | 
 | 	 */ | 
 | 	if (unlikely(len != sizeof(*head))) | 
 | 		return -EINVAL; | 
 |  | 
 | 	current->robust_list = head; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /** | 
 |  * sys_get_robust_list() - Get the robust-futex list head of a task | 
 |  * @pid:	pid of the process [zero for current task] | 
 |  * @head_ptr:	pointer to a list-head pointer, the kernel fills it in | 
 |  * @len_ptr:	pointer to a length field, the kernel fills in the header size | 
 |  */ | 
 | SYSCALL_DEFINE3(get_robust_list, int, pid, | 
 | 		struct robust_list_head __user * __user *, head_ptr, | 
 | 		size_t __user *, len_ptr) | 
 | { | 
 | 	struct robust_list_head __user *head; | 
 | 	unsigned long ret; | 
 | 	struct task_struct *p; | 
 |  | 
 | 	if (!futex_cmpxchg_enabled) | 
 | 		return -ENOSYS; | 
 |  | 
 | 	rcu_read_lock(); | 
 |  | 
 | 	ret = -ESRCH; | 
 | 	if (!pid) | 
 | 		p = current; | 
 | 	else { | 
 | 		p = find_task_by_vpid(pid); | 
 | 		if (!p) | 
 | 			goto err_unlock; | 
 | 	} | 
 |  | 
 | 	ret = -EPERM; | 
 | 	if (!ptrace_may_access(p, PTRACE_MODE_READ_REALCREDS)) | 
 | 		goto err_unlock; | 
 |  | 
 | 	head = p->robust_list; | 
 | 	rcu_read_unlock(); | 
 |  | 
 | 	if (put_user(sizeof(*head), len_ptr)) | 
 | 		return -EFAULT; | 
 | 	return put_user(head, head_ptr); | 
 |  | 
 | err_unlock: | 
 | 	rcu_read_unlock(); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* Constants for the pending_op argument of handle_futex_death */ | 
 | #define HANDLE_DEATH_PENDING	true | 
 | #define HANDLE_DEATH_LIST	false | 
 |  | 
 | /* | 
 |  * Process a futex-list entry, check whether it's owned by the | 
 |  * dying task, and do notification if so: | 
 |  */ | 
 | static int handle_futex_death(u32 __user *uaddr, struct task_struct *curr, | 
 | 			      bool pi, bool pending_op) | 
 | { | 
 | 	u32 uval, nval, mval; | 
 | 	int err; | 
 |  | 
 | 	/* Futex address must be 32bit aligned */ | 
 | 	if ((((unsigned long)uaddr) % sizeof(*uaddr)) != 0) | 
 | 		return -1; | 
 |  | 
 | retry: | 
 | 	if (get_user(uval, uaddr)) | 
 | 		return -1; | 
 |  | 
 | 	/* | 
 | 	 * Special case for regular (non PI) futexes. The unlock path in | 
 | 	 * user space has two race scenarios: | 
 | 	 * | 
 | 	 * 1. The unlock path releases the user space futex value and | 
 | 	 *    before it can execute the futex() syscall to wake up | 
 | 	 *    waiters it is killed. | 
 | 	 * | 
 | 	 * 2. A woken up waiter is killed before it can acquire the | 
 | 	 *    futex in user space. | 
 | 	 * | 
 | 	 * In both cases the TID validation below prevents a wakeup of | 
 | 	 * potential waiters which can cause these waiters to block | 
 | 	 * forever. | 
 | 	 * | 
 | 	 * In both cases the following conditions are met: | 
 | 	 * | 
 | 	 *	1) task->robust_list->list_op_pending != NULL | 
 | 	 *	   @pending_op == true | 
 | 	 *	2) User space futex value == 0 | 
 | 	 *	3) Regular futex: @pi == false | 
 | 	 * | 
 | 	 * If these conditions are met, it is safe to attempt waking up a | 
 | 	 * potential waiter without touching the user space futex value and | 
 | 	 * trying to set the OWNER_DIED bit. The user space futex value is | 
 | 	 * uncontended and the rest of the user space mutex state is | 
 | 	 * consistent, so a woken waiter will just take over the | 
 | 	 * uncontended futex. Setting the OWNER_DIED bit would create | 
 | 	 * inconsistent state and malfunction of the user space owner died | 
 | 	 * handling. | 
 | 	 */ | 
 | 	if (pending_op && !pi && !uval) { | 
 | 		futex_wake(uaddr, 1, 1, FUTEX_BITSET_MATCH_ANY); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	if ((uval & FUTEX_TID_MASK) != task_pid_vnr(curr)) | 
 | 		return 0; | 
 |  | 
 | 	/* | 
 | 	 * Ok, this dying thread is truly holding a futex | 
 | 	 * of interest. Set the OWNER_DIED bit atomically | 
 | 	 * via cmpxchg, and if the value had FUTEX_WAITERS | 
 | 	 * set, wake up a waiter (if any). (We have to do a | 
 | 	 * futex_wake() even if OWNER_DIED is already set - | 
 | 	 * to handle the rare but possible case of recursive | 
 | 	 * thread-death.) The rest of the cleanup is done in | 
 | 	 * userspace. | 
 | 	 */ | 
 | 	mval = (uval & FUTEX_WAITERS) | FUTEX_OWNER_DIED; | 
 |  | 
 | 	/* | 
 | 	 * We are not holding a lock here, but we want to have | 
 | 	 * the pagefault_disable/enable() protection because | 
 | 	 * we want to handle the fault gracefully. If the | 
 | 	 * access fails we try to fault in the futex with R/W | 
 | 	 * verification via get_user_pages. get_user() above | 
 | 	 * does not guarantee R/W access. If that fails we | 
 | 	 * give up and leave the futex locked. | 
 | 	 */ | 
 | 	if ((err = cmpxchg_futex_value_locked(&nval, uaddr, uval, mval))) { | 
 | 		switch (err) { | 
 | 		case -EFAULT: | 
 | 			if (fault_in_user_writeable(uaddr)) | 
 | 				return -1; | 
 | 			goto retry; | 
 |  | 
 | 		case -EAGAIN: | 
 | 			cond_resched(); | 
 | 			goto retry; | 
 |  | 
 | 		default: | 
 | 			WARN_ON_ONCE(1); | 
 | 			return err; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (nval != uval) | 
 | 		goto retry; | 
 |  | 
 | 	/* | 
 | 	 * Wake robust non-PI futexes here. The wakeup of | 
 | 	 * PI futexes happens in exit_pi_state(): | 
 | 	 */ | 
 | 	if (!pi && (uval & FUTEX_WAITERS)) | 
 | 		futex_wake(uaddr, 1, 1, FUTEX_BITSET_MATCH_ANY); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * Fetch a robust-list pointer. Bit 0 signals PI futexes: | 
 |  */ | 
 | static inline int fetch_robust_entry(struct robust_list __user **entry, | 
 | 				     struct robust_list __user * __user *head, | 
 | 				     unsigned int *pi) | 
 | { | 
 | 	unsigned long uentry; | 
 |  | 
 | 	if (get_user(uentry, (unsigned long __user *)head)) | 
 | 		return -EFAULT; | 
 |  | 
 | 	*entry = (void __user *)(uentry & ~1UL); | 
 | 	*pi = uentry & 1; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * Walk curr->robust_list (very carefully, it's a userspace list!) | 
 |  * and mark any locks found there dead, and notify any waiters. | 
 |  * | 
 |  * We silently return on any sign of list-walking problem. | 
 |  */ | 
 | static void exit_robust_list(struct task_struct *curr) | 
 | { | 
 | 	struct robust_list_head __user *head = curr->robust_list; | 
 | 	struct robust_list __user *entry, *next_entry, *pending; | 
 | 	unsigned int limit = ROBUST_LIST_LIMIT, pi, pip; | 
 | 	unsigned int next_pi; | 
 | 	unsigned long futex_offset; | 
 | 	int rc; | 
 |  | 
 | 	if (!futex_cmpxchg_enabled) | 
 | 		return; | 
 |  | 
 | 	/* | 
 | 	 * Fetch the list head (which was registered earlier, via | 
 | 	 * sys_set_robust_list()): | 
 | 	 */ | 
 | 	if (fetch_robust_entry(&entry, &head->list.next, &pi)) | 
 | 		return; | 
 | 	/* | 
 | 	 * Fetch the relative futex offset: | 
 | 	 */ | 
 | 	if (get_user(futex_offset, &head->futex_offset)) | 
 | 		return; | 
 | 	/* | 
 | 	 * Fetch any possibly pending lock-add first, and handle it | 
 | 	 * if it exists: | 
 | 	 */ | 
 | 	if (fetch_robust_entry(&pending, &head->list_op_pending, &pip)) | 
 | 		return; | 
 |  | 
 | 	next_entry = NULL;	/* avoid warning with gcc */ | 
 | 	while (entry != &head->list) { | 
 | 		/* | 
 | 		 * Fetch the next entry in the list before calling | 
 | 		 * handle_futex_death: | 
 | 		 */ | 
 | 		rc = fetch_robust_entry(&next_entry, &entry->next, &next_pi); | 
 | 		/* | 
 | 		 * A pending lock might already be on the list, so | 
 | 		 * don't process it twice: | 
 | 		 */ | 
 | 		if (entry != pending) { | 
 | 			if (handle_futex_death((void __user *)entry + futex_offset, | 
 | 						curr, pi, HANDLE_DEATH_LIST)) | 
 | 				return; | 
 | 		} | 
 | 		if (rc) | 
 | 			return; | 
 | 		entry = next_entry; | 
 | 		pi = next_pi; | 
 | 		/* | 
 | 		 * Avoid excessively long or circular lists: | 
 | 		 */ | 
 | 		if (!--limit) | 
 | 			break; | 
 |  | 
 | 		cond_resched(); | 
 | 	} | 
 |  | 
 | 	if (pending) { | 
 | 		handle_futex_death((void __user *)pending + futex_offset, | 
 | 				   curr, pip, HANDLE_DEATH_PENDING); | 
 | 	} | 
 | } | 
 |  | 
 | static void futex_cleanup(struct task_struct *tsk) | 
 | { | 
 | 	if (unlikely(tsk->robust_list)) { | 
 | 		exit_robust_list(tsk); | 
 | 		tsk->robust_list = NULL; | 
 | 	} | 
 |  | 
 | #ifdef CONFIG_COMPAT | 
 | 	if (unlikely(tsk->compat_robust_list)) { | 
 | 		compat_exit_robust_list(tsk); | 
 | 		tsk->compat_robust_list = NULL; | 
 | 	} | 
 | #endif | 
 |  | 
 | 	if (unlikely(!list_empty(&tsk->pi_state_list))) | 
 | 		exit_pi_state_list(tsk); | 
 | } | 
 |  | 
 | /** | 
 |  * futex_exit_recursive - Set the tasks futex state to FUTEX_STATE_DEAD | 
 |  * @tsk:	task to set the state on | 
 |  * | 
 |  * Set the futex exit state of the task lockless. The futex waiter code | 
 |  * observes that state when a task is exiting and loops until the task has | 
 |  * actually finished the futex cleanup. The worst case for this is that the | 
 |  * waiter runs through the wait loop until the state becomes visible. | 
 |  * | 
 |  * This is called from the recursive fault handling path in do_exit(). | 
 |  * | 
 |  * This is best effort. Either the futex exit code has run already or | 
 |  * not. If the OWNER_DIED bit has been set on the futex then the waiter can | 
 |  * take it over. If not, the problem is pushed back to user space. If the | 
 |  * futex exit code did not run yet, then an already queued waiter might | 
 |  * block forever, but there is nothing which can be done about that. | 
 |  */ | 
 | void futex_exit_recursive(struct task_struct *tsk) | 
 | { | 
 | 	/* If the state is FUTEX_STATE_EXITING then futex_exit_mutex is held */ | 
 | 	if (tsk->futex_state == FUTEX_STATE_EXITING) | 
 | 		mutex_unlock(&tsk->futex_exit_mutex); | 
 | 	tsk->futex_state = FUTEX_STATE_DEAD; | 
 | } | 
 |  | 
 | static void futex_cleanup_begin(struct task_struct *tsk) | 
 | { | 
 | 	/* | 
 | 	 * Prevent various race issues against a concurrent incoming waiter | 
 | 	 * including live locks by forcing the waiter to block on | 
 | 	 * tsk->futex_exit_mutex when it observes FUTEX_STATE_EXITING in | 
 | 	 * attach_to_pi_owner(). | 
 | 	 */ | 
 | 	mutex_lock(&tsk->futex_exit_mutex); | 
 |  | 
 | 	/* | 
 | 	 * Switch the state to FUTEX_STATE_EXITING under tsk->pi_lock. | 
 | 	 * | 
 | 	 * This ensures that all subsequent checks of tsk->futex_state in | 
 | 	 * attach_to_pi_owner() must observe FUTEX_STATE_EXITING with | 
 | 	 * tsk->pi_lock held. | 
 | 	 * | 
 | 	 * It guarantees also that a pi_state which was queued right before | 
 | 	 * the state change under tsk->pi_lock by a concurrent waiter must | 
 | 	 * be observed in exit_pi_state_list(). | 
 | 	 */ | 
 | 	raw_spin_lock_irq(&tsk->pi_lock); | 
 | 	tsk->futex_state = FUTEX_STATE_EXITING; | 
 | 	raw_spin_unlock_irq(&tsk->pi_lock); | 
 | } | 
 |  | 
 | static void futex_cleanup_end(struct task_struct *tsk, int state) | 
 | { | 
 | 	/* | 
 | 	 * Lockless store. The only side effect is that an observer might | 
 | 	 * take another loop until it becomes visible. | 
 | 	 */ | 
 | 	tsk->futex_state = state; | 
 | 	/* | 
 | 	 * Drop the exit protection. This unblocks waiters which observed | 
 | 	 * FUTEX_STATE_EXITING to reevaluate the state. | 
 | 	 */ | 
 | 	mutex_unlock(&tsk->futex_exit_mutex); | 
 | } | 
 |  | 
 | void futex_exec_release(struct task_struct *tsk) | 
 | { | 
 | 	/* | 
 | 	 * The state handling is done for consistency, but in the case of | 
 | 	 * exec() there is no way to prevent futher damage as the PID stays | 
 | 	 * the same. But for the unlikely and arguably buggy case that a | 
 | 	 * futex is held on exec(), this provides at least as much state | 
 | 	 * consistency protection which is possible. | 
 | 	 */ | 
 | 	futex_cleanup_begin(tsk); | 
 | 	futex_cleanup(tsk); | 
 | 	/* | 
 | 	 * Reset the state to FUTEX_STATE_OK. The task is alive and about | 
 | 	 * exec a new binary. | 
 | 	 */ | 
 | 	futex_cleanup_end(tsk, FUTEX_STATE_OK); | 
 | } | 
 |  | 
 | void futex_exit_release(struct task_struct *tsk) | 
 | { | 
 | 	futex_cleanup_begin(tsk); | 
 | 	futex_cleanup(tsk); | 
 | 	futex_cleanup_end(tsk, FUTEX_STATE_DEAD); | 
 | } | 
 |  | 
 | long do_futex(u32 __user *uaddr, int op, u32 val, ktime_t *timeout, | 
 | 		u32 __user *uaddr2, u32 val2, u32 val3) | 
 | { | 
 | 	int cmd = op & FUTEX_CMD_MASK; | 
 | 	unsigned int flags = 0; | 
 |  | 
 | 	if (!(op & FUTEX_PRIVATE_FLAG)) | 
 | 		flags |= FLAGS_SHARED; | 
 |  | 
 | 	if (op & FUTEX_CLOCK_REALTIME) { | 
 | 		flags |= FLAGS_CLOCKRT; | 
 | 		if (cmd != FUTEX_WAIT_BITSET &&	cmd != FUTEX_WAIT_REQUEUE_PI) | 
 | 			return -ENOSYS; | 
 | 	} | 
 |  | 
 | 	switch (cmd) { | 
 | 	case FUTEX_LOCK_PI: | 
 | 	case FUTEX_UNLOCK_PI: | 
 | 	case FUTEX_TRYLOCK_PI: | 
 | 	case FUTEX_WAIT_REQUEUE_PI: | 
 | 	case FUTEX_CMP_REQUEUE_PI: | 
 | 		if (!futex_cmpxchg_enabled) | 
 | 			return -ENOSYS; | 
 | 	} | 
 |  | 
 | 	switch (cmd) { | 
 | 	case FUTEX_WAIT: | 
 | 		val3 = FUTEX_BITSET_MATCH_ANY; | 
 | 		/* fall through */ | 
 | 	case FUTEX_WAIT_BITSET: | 
 | 		return futex_wait(uaddr, flags, val, timeout, val3); | 
 | 	case FUTEX_WAKE: | 
 | 		val3 = FUTEX_BITSET_MATCH_ANY; | 
 | 		/* fall through */ | 
 | 	case FUTEX_WAKE_BITSET: | 
 | 		return futex_wake(uaddr, flags, val, val3); | 
 | 	case FUTEX_REQUEUE: | 
 | 		return futex_requeue(uaddr, flags, uaddr2, val, val2, NULL, 0); | 
 | 	case FUTEX_CMP_REQUEUE: | 
 | 		return futex_requeue(uaddr, flags, uaddr2, val, val2, &val3, 0); | 
 | 	case FUTEX_WAKE_OP: | 
 | 		return futex_wake_op(uaddr, flags, uaddr2, val, val2, val3); | 
 | 	case FUTEX_LOCK_PI: | 
 | 		return futex_lock_pi(uaddr, flags, timeout, 0); | 
 | 	case FUTEX_UNLOCK_PI: | 
 | 		return futex_unlock_pi(uaddr, flags); | 
 | 	case FUTEX_TRYLOCK_PI: | 
 | 		return futex_lock_pi(uaddr, flags, NULL, 1); | 
 | 	case FUTEX_WAIT_REQUEUE_PI: | 
 | 		val3 = FUTEX_BITSET_MATCH_ANY; | 
 | 		return futex_wait_requeue_pi(uaddr, flags, val, timeout, val3, | 
 | 					     uaddr2); | 
 | 	case FUTEX_CMP_REQUEUE_PI: | 
 | 		return futex_requeue(uaddr, flags, uaddr2, val, val2, &val3, 1); | 
 | 	} | 
 | 	return -ENOSYS; | 
 | } | 
 |  | 
 |  | 
 | SYSCALL_DEFINE6(futex, u32 __user *, uaddr, int, op, u32, val, | 
 | 		struct __kernel_timespec __user *, utime, u32 __user *, uaddr2, | 
 | 		u32, val3) | 
 | { | 
 | 	struct timespec64 ts; | 
 | 	ktime_t t, *tp = NULL; | 
 | 	u32 val2 = 0; | 
 | 	int cmd = op & FUTEX_CMD_MASK; | 
 |  | 
 | 	if (utime && (cmd == FUTEX_WAIT || cmd == FUTEX_LOCK_PI || | 
 | 		      cmd == FUTEX_WAIT_BITSET || | 
 | 		      cmd == FUTEX_WAIT_REQUEUE_PI)) { | 
 | 		if (unlikely(should_fail_futex(!(op & FUTEX_PRIVATE_FLAG)))) | 
 | 			return -EFAULT; | 
 | 		if (get_timespec64(&ts, utime)) | 
 | 			return -EFAULT; | 
 | 		if (!timespec64_valid(&ts)) | 
 | 			return -EINVAL; | 
 |  | 
 | 		t = timespec64_to_ktime(ts); | 
 | 		if (cmd == FUTEX_WAIT) | 
 | 			t = ktime_add_safe(ktime_get(), t); | 
 | 		tp = &t; | 
 | 	} | 
 | 	/* | 
 | 	 * requeue parameter in 'utime' if cmd == FUTEX_*_REQUEUE_*. | 
 | 	 * number of waiters to wake in 'utime' if cmd == FUTEX_WAKE_OP. | 
 | 	 */ | 
 | 	if (cmd == FUTEX_REQUEUE || cmd == FUTEX_CMP_REQUEUE || | 
 | 	    cmd == FUTEX_CMP_REQUEUE_PI || cmd == FUTEX_WAKE_OP) | 
 | 		val2 = (u32) (unsigned long) utime; | 
 |  | 
 | 	return do_futex(uaddr, op, val, tp, uaddr2, val2, val3); | 
 | } | 
 |  | 
 | #ifdef CONFIG_COMPAT | 
 | /* | 
 |  * Fetch a robust-list pointer. Bit 0 signals PI futexes: | 
 |  */ | 
 | static inline int | 
 | compat_fetch_robust_entry(compat_uptr_t *uentry, struct robust_list __user **entry, | 
 | 		   compat_uptr_t __user *head, unsigned int *pi) | 
 | { | 
 | 	if (get_user(*uentry, head)) | 
 | 		return -EFAULT; | 
 |  | 
 | 	*entry = compat_ptr((*uentry) & ~1); | 
 | 	*pi = (unsigned int)(*uentry) & 1; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void __user *futex_uaddr(struct robust_list __user *entry, | 
 | 				compat_long_t futex_offset) | 
 | { | 
 | 	compat_uptr_t base = ptr_to_compat(entry); | 
 | 	void __user *uaddr = compat_ptr(base + futex_offset); | 
 |  | 
 | 	return uaddr; | 
 | } | 
 |  | 
 | /* | 
 |  * Walk curr->robust_list (very carefully, it's a userspace list!) | 
 |  * and mark any locks found there dead, and notify any waiters. | 
 |  * | 
 |  * We silently return on any sign of list-walking problem. | 
 |  */ | 
 | static void compat_exit_robust_list(struct task_struct *curr) | 
 | { | 
 | 	struct compat_robust_list_head __user *head = curr->compat_robust_list; | 
 | 	struct robust_list __user *entry, *next_entry, *pending; | 
 | 	unsigned int limit = ROBUST_LIST_LIMIT, pi, pip; | 
 | 	unsigned int next_pi; | 
 | 	compat_uptr_t uentry, next_uentry, upending; | 
 | 	compat_long_t futex_offset; | 
 | 	int rc; | 
 |  | 
 | 	if (!futex_cmpxchg_enabled) | 
 | 		return; | 
 |  | 
 | 	/* | 
 | 	 * Fetch the list head (which was registered earlier, via | 
 | 	 * sys_set_robust_list()): | 
 | 	 */ | 
 | 	if (compat_fetch_robust_entry(&uentry, &entry, &head->list.next, &pi)) | 
 | 		return; | 
 | 	/* | 
 | 	 * Fetch the relative futex offset: | 
 | 	 */ | 
 | 	if (get_user(futex_offset, &head->futex_offset)) | 
 | 		return; | 
 | 	/* | 
 | 	 * Fetch any possibly pending lock-add first, and handle it | 
 | 	 * if it exists: | 
 | 	 */ | 
 | 	if (compat_fetch_robust_entry(&upending, &pending, | 
 | 			       &head->list_op_pending, &pip)) | 
 | 		return; | 
 |  | 
 | 	next_entry = NULL;	/* avoid warning with gcc */ | 
 | 	while (entry != (struct robust_list __user *) &head->list) { | 
 | 		/* | 
 | 		 * Fetch the next entry in the list before calling | 
 | 		 * handle_futex_death: | 
 | 		 */ | 
 | 		rc = compat_fetch_robust_entry(&next_uentry, &next_entry, | 
 | 			(compat_uptr_t __user *)&entry->next, &next_pi); | 
 | 		/* | 
 | 		 * A pending lock might already be on the list, so | 
 | 		 * dont process it twice: | 
 | 		 */ | 
 | 		if (entry != pending) { | 
 | 			void __user *uaddr = futex_uaddr(entry, futex_offset); | 
 |  | 
 | 			if (handle_futex_death(uaddr, curr, pi, | 
 | 					       HANDLE_DEATH_LIST)) | 
 | 				return; | 
 | 		} | 
 | 		if (rc) | 
 | 			return; | 
 | 		uentry = next_uentry; | 
 | 		entry = next_entry; | 
 | 		pi = next_pi; | 
 | 		/* | 
 | 		 * Avoid excessively long or circular lists: | 
 | 		 */ | 
 | 		if (!--limit) | 
 | 			break; | 
 |  | 
 | 		cond_resched(); | 
 | 	} | 
 | 	if (pending) { | 
 | 		void __user *uaddr = futex_uaddr(pending, futex_offset); | 
 |  | 
 | 		handle_futex_death(uaddr, curr, pip, HANDLE_DEATH_PENDING); | 
 | 	} | 
 | } | 
 |  | 
 | COMPAT_SYSCALL_DEFINE2(set_robust_list, | 
 | 		struct compat_robust_list_head __user *, head, | 
 | 		compat_size_t, len) | 
 | { | 
 | 	if (!futex_cmpxchg_enabled) | 
 | 		return -ENOSYS; | 
 |  | 
 | 	if (unlikely(len != sizeof(*head))) | 
 | 		return -EINVAL; | 
 |  | 
 | 	current->compat_robust_list = head; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | COMPAT_SYSCALL_DEFINE3(get_robust_list, int, pid, | 
 | 			compat_uptr_t __user *, head_ptr, | 
 | 			compat_size_t __user *, len_ptr) | 
 | { | 
 | 	struct compat_robust_list_head __user *head; | 
 | 	unsigned long ret; | 
 | 	struct task_struct *p; | 
 |  | 
 | 	if (!futex_cmpxchg_enabled) | 
 | 		return -ENOSYS; | 
 |  | 
 | 	rcu_read_lock(); | 
 |  | 
 | 	ret = -ESRCH; | 
 | 	if (!pid) | 
 | 		p = current; | 
 | 	else { | 
 | 		p = find_task_by_vpid(pid); | 
 | 		if (!p) | 
 | 			goto err_unlock; | 
 | 	} | 
 |  | 
 | 	ret = -EPERM; | 
 | 	if (!ptrace_may_access(p, PTRACE_MODE_READ_REALCREDS)) | 
 | 		goto err_unlock; | 
 |  | 
 | 	head = p->compat_robust_list; | 
 | 	rcu_read_unlock(); | 
 |  | 
 | 	if (put_user(sizeof(*head), len_ptr)) | 
 | 		return -EFAULT; | 
 | 	return put_user(ptr_to_compat(head), head_ptr); | 
 |  | 
 | err_unlock: | 
 | 	rcu_read_unlock(); | 
 |  | 
 | 	return ret; | 
 | } | 
 | #endif /* CONFIG_COMPAT */ | 
 |  | 
 | #ifdef CONFIG_COMPAT_32BIT_TIME | 
 | SYSCALL_DEFINE6(futex_time32, u32 __user *, uaddr, int, op, u32, val, | 
 | 		struct old_timespec32 __user *, utime, u32 __user *, uaddr2, | 
 | 		u32, val3) | 
 | { | 
 | 	struct timespec64 ts; | 
 | 	ktime_t t, *tp = NULL; | 
 | 	int val2 = 0; | 
 | 	int cmd = op & FUTEX_CMD_MASK; | 
 |  | 
 | 	if (utime && (cmd == FUTEX_WAIT || cmd == FUTEX_LOCK_PI || | 
 | 		      cmd == FUTEX_WAIT_BITSET || | 
 | 		      cmd == FUTEX_WAIT_REQUEUE_PI)) { | 
 | 		if (get_old_timespec32(&ts, utime)) | 
 | 			return -EFAULT; | 
 | 		if (!timespec64_valid(&ts)) | 
 | 			return -EINVAL; | 
 |  | 
 | 		t = timespec64_to_ktime(ts); | 
 | 		if (cmd == FUTEX_WAIT) | 
 | 			t = ktime_add_safe(ktime_get(), t); | 
 | 		tp = &t; | 
 | 	} | 
 | 	if (cmd == FUTEX_REQUEUE || cmd == FUTEX_CMP_REQUEUE || | 
 | 	    cmd == FUTEX_CMP_REQUEUE_PI || cmd == FUTEX_WAKE_OP) | 
 | 		val2 = (int) (unsigned long) utime; | 
 |  | 
 | 	return do_futex(uaddr, op, val, tp, uaddr2, val2, val3); | 
 | } | 
 | #endif /* CONFIG_COMPAT_32BIT_TIME */ | 
 |  | 
 | static void __init futex_detect_cmpxchg(void) | 
 | { | 
 | #ifndef CONFIG_HAVE_FUTEX_CMPXCHG | 
 | 	u32 curval; | 
 |  | 
 | 	/* | 
 | 	 * This will fail and we want it. Some arch implementations do | 
 | 	 * runtime detection of the futex_atomic_cmpxchg_inatomic() | 
 | 	 * functionality. We want to know that before we call in any | 
 | 	 * of the complex code paths. Also we want to prevent | 
 | 	 * registration of robust lists in that case. NULL is | 
 | 	 * guaranteed to fault and we get -EFAULT on functional | 
 | 	 * implementation, the non-functional ones will return | 
 | 	 * -ENOSYS. | 
 | 	 */ | 
 | 	if (cmpxchg_futex_value_locked(&curval, NULL, 0, 0) == -EFAULT) | 
 | 		futex_cmpxchg_enabled = 1; | 
 | #endif | 
 | } | 
 |  | 
 | static int __init futex_init(void) | 
 | { | 
 | 	unsigned int futex_shift; | 
 | 	unsigned long i; | 
 |  | 
 | #if CONFIG_BASE_SMALL | 
 | 	futex_hashsize = 16; | 
 | #else | 
 | 	futex_hashsize = roundup_pow_of_two(256 * num_possible_cpus()); | 
 | #endif | 
 |  | 
 | 	futex_queues = alloc_large_system_hash("futex", sizeof(*futex_queues), | 
 | 					       futex_hashsize, 0, | 
 | 					       futex_hashsize < 256 ? HASH_SMALL : 0, | 
 | 					       &futex_shift, NULL, | 
 | 					       futex_hashsize, futex_hashsize); | 
 | 	futex_hashsize = 1UL << futex_shift; | 
 |  | 
 | 	futex_detect_cmpxchg(); | 
 |  | 
 | 	for (i = 0; i < futex_hashsize; i++) { | 
 | 		atomic_set(&futex_queues[i].waiters, 0); | 
 | 		plist_head_init(&futex_queues[i].chain); | 
 | 		spin_lock_init(&futex_queues[i].lock); | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 | core_initcall(futex_init); |