| #!/bin/bash |
| # |
| # tftp flash script for wireless routers |
| # |
| # Copyright (C) 2004 by Oleg I. Vdovikin <oleg@cs.msu.su> |
| # Copyright (C) 2005 by Waldemar Brodkorb <wbx@openwrt.org> |
| # |
| # This program is free software; you can redistribute it and/or modify |
| # it under the terms of the GNU General Public License as published by |
| # the Free Software Foundation; either version 2 of the License, or |
| # (at your option) any later version. |
| # |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY; without even the implied warranty of |
| # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| # General Public License for more details. |
| # |
| # You should have received a copy of the GNU General Public License |
| # along with this program; if not, write to the Free Software |
| # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| # |
| |
| if [ -z "$1" ] || [ ! -f "$1" ] || [ -z "$2" ]; then |
| echo Usage: "$0" firmware vendor |
| cat << EOF |
| IMPORTANT: |
| Notes for Linksys / Asus WL500gx router: |
| be sure you have set boot_wait to yes. Power on your router |
| after executing this script. |
| |
| Notes for Asus WL500g router: |
| be sure POWER led is flashing (If this is not the case |
| poweroff the device, push the reset button & power on |
| it again, then release button) |
| |
| 1) connect your pc to the LAN port |
| 2) be sure your link is up and has an address in the |
| 192.168.1.0/24 address range (and not the 192.168.1.1) |
| |
| Notes for Toshiba router: |
| boot_wait is enabled by default on these units. |
| |
| 1) connect your pc to any of the four LAN ports |
| 2) be sure your link is up and has an address in the |
| 192.168.10.1/24 address range (and not the 192.168.10.1) |
| 3) run this script (unit will only accept .trx images) |
| 4) Turn unit power on. |
| |
| EOF |
| exit 0 |
| fi |
| if [ "$2" = "asus" ]; then |
| echo Confirming IP address setting... |
| echo -en "get ASUSSPACELINK\x01\x01\xa8\xc0 /dev/null\nquit\n" | tftp 192.168.1.1 |
| echo Flashing 192.168.1.1 using "$1"... |
| echo -en "binary\nput $1 ASUSSPACELINK\nquit\n" | tftp 192.168.1.1 |
| echo Please wait until leds stops flashing. |
| elif [ "$2" = "linksys" ]; then |
| echo Flashing 192.168.1.1 using "$1"... |
| echo -en "rexmt 1\ntrace\nbinary\nput $1\nquit\n" | tftp 192.168.1.1 |
| echo Please wait until power led stops flashing. Do not poweroff! Then you can login via telnet 192.168.1.1. |
| elif [ "$2" = "toshiba" ]; then |
| echo Flashing 192.168.10.1 using "$1"... |
| echo -en "rexmt 1\ntrace\nbinary\nput $1\nquit\n" | tftp 192.168.10.1 |
| echo Unit will automatically reboot within 5 minutes. Do not power off. Then you can login via telnet 192.168.10.1. |
| fi |