external/subpack/net/mwan3/files/usr/sbin/mwan3

#!/bin/sh

. /lib/functions.sh
. /usr/share/libubox/jshn.sh
. /lib/functions/network.sh
. /lib/mwan3/mwan3.sh

command_help() {
	local cmd="$1"
	local help="$2"

	echo "$(printf "%-25s%s" "${cmd}" "${help}")"
}

help()
{
	cat <<EOF
Syntax: mwan3 [command]

Available commands:
EOF
	command_help "start" "Load iptables rules, ip rules and ip routes"
	command_help "stop" "Unload iptables rules, ip rules and ip routes"
	command_help "restart" "Reload iptables rules, ip rules and ip routes"
	command_help "ifup <iface>" "Load rules and routes for specific interface"
	command_help "ifdown <iface>" "Unload rules and routes for specific interface"
	command_help "interfaces" "Show interfaces status"
	command_help "policies" "Show currently active policy"
	command_help "connected" "Show directly connected networks"
	command_help "rules" "Show active rules"
	command_help "status" "Show all status"
	command_help "internal <ipv4|ipv6>" "Show internal configuration <default: ipv4>"
	command_help "use <iface> <cmd>" "Run a command bound to <iface> and avoid mwan3 rules"
}

ifdown() {
	if [ -z "$1" ]; then
		echo "Error: Expecting interface. Usage: mwan3 ifdown <interface>"
		exit 0
	fi

	if [ -n "$2" ]; then
		echo "Error: Too many arguments. Usage: mwan3 ifdown <interface>"
		exit 0
	fi

	mwan3_interface_hotplug_shutdown "$1" 1
}

ifup() {
	. /etc/init.d/mwan3

	if [ -z "$1" ]; then
		echo "Expecting interface. Usage: mwan3 ifup <interface>"
		exit 0
	fi

	if [ -n "$2" ]; then
		echo "Too many arguments. Usage: mwan3 ifup <interface>"
		exit 0
	fi

	mwan3_ifup "$1" "cmd"
}

interfaces()
{
	config_load mwan3

	echo "Interface status:"
	config_foreach mwan3_report_iface_status interface
	echo
}

policies()
{
	echo "Current ipv4 policies:"
	mwan3_report_policies_v4
	echo
	[ $NO_IPV6 -ne 0 ] && return
	echo "Current ipv6 policies:"
	mwan3_report_policies_v6
	echo
}

connected()
{
	echo "Directly connected ipv4 networks:"
	mwan3_report_connected_v4
	echo
	[ $NO_IPV6 -ne 0 ] && return
	echo "Directly connected ipv6 networks:"
	mwan3_report_connected_v6
	echo
}

rules()
{
	echo "Active ipv4 user rules:"
	mwan3_report_rules_v4
	echo
	[ $NO_IPV6 -ne 0 ] && return
	echo "Active ipv6 user rules:"
	mwan3_report_rules_v6
	echo
}

status()
{
	interfaces
	policies
	connected
	rules
}

internal()
{
	local family="$1"
	local dash="-------------------------------------------------"

	if [ -f "/etc/openwrt_release" ]; then
		. /etc/openwrt_release
	fi

	local ipt ip output

	if [ "$family" = "ipv6" ]; then
		ipt="$IPT6"
		ip="$IP6"
	else
		ipt="$IPT4"
		ip="$IP4"
	fi

	echo "Software-Version"
	echo "$dash"

	if [ "$DISTRIB_RELEASE" != "" ]; then
		echo "OpenWrt - $DISTRIB_RELEASE"
	else
		echo "OpenWrt - unknown"
	fi

	echo ""
	echo "Output of \"$ip a show\""
	echo "$dash"
	output="$($ip a show)"
	if [ "$output" != "" ]; then
		echo "$output"
	else
		echo "No data found"
	fi

	echo ""
	echo "Output of \"$ip route show\""
	echo "$dash"
	output="$($ip route show)"
	if [ "$output" != "" ]; then
		echo "$output"
	else
		echo "No data found"
	fi

	echo ""
	echo "Output of \"$ip rule show\""
	echo "$dash"
	output="$($ip rule show)"
	if [ "$output" != "" ]; then
		echo "$output"
	else
		echo "No data found"
	fi

	echo ""
	echo "Output of \"$ip route list table 1-250\""
	echo "$dash"
	local dump=0
	for i in $(seq 1 250); do
		output=$($ip route list table $i 2>/dev/null)
		if [ "$output" != "" ];then
			dump=1
			echo "Routing table $i:"
			echo "$output"
			echo ""
		fi
	done
	if [ "$dump" = "0" ]; then
		echo "No data found"
		echo ""
	fi

	echo "Output of \"$ipt -L -v -n\""
	echo "$dash"
	output="$($ipt -L -v -n)"
	if [ "$output" != "" ]; then
		echo "$output"
	else
		echo "No data found"
	fi
}

start() {
	/etc/init.d/mwan3 enable
	/etc/init.d/mwan3 start
}

stop() {
	/etc/init.d/mwan3 disable
	/etc/init.d/mwan3 stop
}

restart() {
	/etc/init.d/mwan3 enable
	/etc/init.d/mwan3 stop
	/etc/init.d/mwan3 start
}

use() {
	# Run a command with the device, src_ip and fwmark set to avoid processing by mwan3
	# firewall rules

	local interface device src_ip family

	interface=$1 ; shift
	[ -z "$*" ] && echo "no command specified for mwan3 use" && return
	network_get_device device $interface
	[ -z "$device" ] && echo "could not find device for $interface" && return

	mwan3_get_src_ip src_ip $interface
	[ -z "$src_ip" ] && echo "could not find src_ip for $interface" && return

	config_get family $interface family
	[ -z "$family" ] && echo "could not find family for $interface. Using ipv4." && family='ipv4'

	echo "Running '$*' with DEVICE=$device SRCIP=$src_ip FWMARK=$MMX_DEFAULT FAMILY=$family"
	# if a program (not a shell builtin) is run: use "exec" for allowing direct process control
	if [ -x "$(command -v "$1")" ]; then
		set -- exec "$@"
	fi
	FAMILY=$family DEVICE=$device SRCIP=$src_ip FWMARK=$MMX_DEFAULT LD_PRELOAD=/lib/mwan3/libwrap_mwan3_sockopt.so.1.0 "$@"
}

case "$1" in
	ifup|ifdown|interfaces|policies|connected|rules|status|start|stop|restart|use|internal)
		mwan3_init
		"$@"
	;;
	*)
		help
	;;
esac

exit 0