marvell/linux/arch/arm/boot/dts/asr_pm813.dtsi

/*
 *  Copyright 2021 ASR Microelectronics (Shanghai) Co., Ltd.
 *
 *  This program is free software; you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License version 2 as
 *  published by the Free Software Foundation.
 */

&pmic7 {
	compatible = "asr,pm813";
	reg = <0x30>;
	/* interrupts = <4>;
	interrupt-parent = <&intc>;
	interrupt-controller;
	#interrupt-cells = <1>; */
	asr,pm813-irq-write-clear;
	/* set scs-int-active-high depending on board connection */
	/* scs-int-active-high; */

	asr,pm813-power-page-addr = <0x1>;

	regulators {
		compatible = "asr,pm813-regulator";

		BUCK1 {
			regulator-compatible = "PM813-BUCK1";
			regulator-min-microvolt = <600000>;
			regulator-max-microvolt = <3950000>;
			regulator-boot-on;
			regulator-always-on;
		};
		BUCK2 {
			regulator-compatible = "PM813-BUCK2";
			regulator-min-microvolt = <600000>;
			regulator-max-microvolt = <3950000>;
			regulator-boot-on;
			regulator-always-on;
		};
		BUCK3 {
			regulator-compatible = "PM813-BUCK3";
			regulator-min-microvolt = <600000>;
			regulator-max-microvolt = <3950000>;
			regulator-boot-on;
			regulator-always-on;
		};

		pm813ldo1: LDO1 {
			regulator-compatible = "PM813-LDO1";
			regulator-min-microvolt = <1200000>;
			regulator-max-microvolt = <3300000>;
		};
		pm813ldo2: LDO2 {
			regulator-compatible = "PM813-LDO2";
			regulator-min-microvolt = <1200000>;
			regulator-max-microvolt = <3300000>;
			regulator-boot-on;
			regulator-always-on;
		};
		pm813ldo3: LDO3 {
			regulator-compatible = "PM813-LDO3";
			regulator-min-microvolt = <1200000>;
			regulator-max-microvolt = <3300000>;
		};
		pm813ldo4: LDO4  {
			regulator-compatible = "PM813-LDO4";
			regulator-min-microvolt = <1200000>;
			regulator-max-microvolt = <3300000>;
		};
		pm813ldo5: LDO5 {
			regulator-compatible = "PM813-LDO5";
			regulator-min-microvolt = <1200000>;
			regulator-max-microvolt = <3300000>;
			regulator-boot-on;
			regulator-always-on;
		};
		pm813ldo6: LDO6 {
			regulator-compatible = "PM813-LDO6";
			regulator-min-microvolt = <1200000>;
			regulator-max-microvolt = <3300000>;
			regulator-boot-on;
			regulator-always-on;
		};
		pm813ldo7: LDO7 {
			regulator-compatible = "PM813-LDO7";
			regulator-min-microvolt = <1200000>;
			regulator-max-microvolt = <3300000>;
			regulator-boot-on;
			regulator-always-on;
		};
		/* pm813ldo8: LDO8 {
			regulator-compatible = "PM813-LDO8";
			regulator-min-microvolt = <1200000>;
			regulator-max-microvolt = <3300000>;
			regulator-boot-on;
			regulator-always-on;
		}; */
		pm813ldo9: LDO9  {
			regulator-compatible = "PM813-LDO9";
			regulator-min-microvolt = <1200000>;
			regulator-max-microvolt = <3300000>;
		};
		pm813ldo10: LDO10 {
			regulator-compatible = "PM813-LDO10";
			regulator-min-microvolt = <1200000>;
			regulator-max-microvolt = <3300000>;
		};
		pm813ldo11: LDO11 {
			regulator-compatible = "PM813-LDO11";
			regulator-min-microvolt = <1200000>;
			regulator-max-microvolt = <3300000>;
			regulator-boot-on;
			regulator-always-on;
		};
		pm813ldo12: LDO12 {
			regulator-compatible = "PM813-LDO12";
			regulator-min-microvolt = <1200000>;
			regulator-max-microvolt = <3300000>;
		};
		pm813ldo13: LDO13 {
			regulator-compatible = "PM813-LDO13";
			regulator-min-microvolt = <1200000>;
			regulator-max-microvolt = <3300000>;

		};

	};
	dvc {
		status = "okay";
		compatible = "marvell,88pm8xx-dvc";
		/* pm800 dvc affect buck1/4, affected 32bit = (1 << 3) | (1 << 0)*/
		dvc-affected-buckbits = <1>;
		dvc-gpio1 = <13>;
		dvc-gpio2 = <127>;
		pinctrl-names = "default";
		pinctrl-0 = <&dvc_pmx_func>;
	};
	usb813: usb {
		compatible = "marvell,88pm80x-usb";
		vbus_gpio = <0xff>; /* set_vbus */
		/* id-gpadc = <0xff>;*//* usb-id */
		vchg-from-exton = <1>;
	};
	wd {
		compatible = "marvell,88pm80x-wdt";
	};
};