| /* | 
 |  * DRBG: Deterministic Random Bits Generator | 
 |  *       Based on NIST Recommended DRBG from NIST SP800-90A with the following | 
 |  *       properties: | 
 |  *		* CTR DRBG with DF with AES-128, AES-192, AES-256 cores | 
 |  *		* Hash DRBG with DF with SHA-1, SHA-256, SHA-384, SHA-512 cores | 
 |  *		* HMAC DRBG with DF with SHA-1, SHA-256, SHA-384, SHA-512 cores | 
 |  *		* with and without prediction resistance | 
 |  * | 
 |  * Copyright Stephan Mueller <smueller@chronox.de>, 2014 | 
 |  * | 
 |  * Redistribution and use in source and binary forms, with or without | 
 |  * modification, are permitted provided that the following conditions | 
 |  * are met: | 
 |  * 1. Redistributions of source code must retain the above copyright | 
 |  *    notice, and the entire permission notice in its entirety, | 
 |  *    including the disclaimer of warranties. | 
 |  * 2. Redistributions in binary form must reproduce the above copyright | 
 |  *    notice, this list of conditions and the following disclaimer in the | 
 |  *    documentation and/or other materials provided with the distribution. | 
 |  * 3. The name of the author may not be used to endorse or promote | 
 |  *    products derived from this software without specific prior | 
 |  *    written permission. | 
 |  * | 
 |  * ALTERNATIVELY, this product may be distributed under the terms of | 
 |  * the GNU General Public License, in which case the provisions of the GPL are | 
 |  * required INSTEAD OF the above restrictions.  (This clause is | 
 |  * necessary due to a potential bad interaction between the GPL and | 
 |  * the restrictions contained in a BSD-style copyright.) | 
 |  * | 
 |  * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED | 
 |  * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES | 
 |  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ALL OF | 
 |  * WHICH ARE HEREBY DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE | 
 |  * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR | 
 |  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT | 
 |  * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR | 
 |  * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF | 
 |  * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT | 
 |  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE | 
 |  * USE OF THIS SOFTWARE, EVEN IF NOT ADVISED OF THE POSSIBILITY OF SUCH | 
 |  * DAMAGE. | 
 |  * | 
 |  * DRBG Usage | 
 |  * ========== | 
 |  * The SP 800-90A DRBG allows the user to specify a personalization string | 
 |  * for initialization as well as an additional information string for each | 
 |  * random number request. The following code fragments show how a caller | 
 |  * uses the kernel crypto API to use the full functionality of the DRBG. | 
 |  * | 
 |  * Usage without any additional data | 
 |  * --------------------------------- | 
 |  * struct crypto_rng *drng; | 
 |  * int err; | 
 |  * char data[DATALEN]; | 
 |  * | 
 |  * drng = crypto_alloc_rng(drng_name, 0, 0); | 
 |  * err = crypto_rng_get_bytes(drng, &data, DATALEN); | 
 |  * crypto_free_rng(drng); | 
 |  * | 
 |  * | 
 |  * Usage with personalization string during initialization | 
 |  * ------------------------------------------------------- | 
 |  * struct crypto_rng *drng; | 
 |  * int err; | 
 |  * char data[DATALEN]; | 
 |  * struct drbg_string pers; | 
 |  * char personalization[11] = "some-string"; | 
 |  * | 
 |  * drbg_string_fill(&pers, personalization, strlen(personalization)); | 
 |  * drng = crypto_alloc_rng(drng_name, 0, 0); | 
 |  * // The reset completely re-initializes the DRBG with the provided | 
 |  * // personalization string | 
 |  * err = crypto_rng_reset(drng, &personalization, strlen(personalization)); | 
 |  * err = crypto_rng_get_bytes(drng, &data, DATALEN); | 
 |  * crypto_free_rng(drng); | 
 |  * | 
 |  * | 
 |  * Usage with additional information string during random number request | 
 |  * --------------------------------------------------------------------- | 
 |  * struct crypto_rng *drng; | 
 |  * int err; | 
 |  * char data[DATALEN]; | 
 |  * char addtl_string[11] = "some-string"; | 
 |  * string drbg_string addtl; | 
 |  * | 
 |  * drbg_string_fill(&addtl, addtl_string, strlen(addtl_string)); | 
 |  * drng = crypto_alloc_rng(drng_name, 0, 0); | 
 |  * // The following call is a wrapper to crypto_rng_get_bytes() and returns | 
 |  * // the same error codes. | 
 |  * err = crypto_drbg_get_bytes_addtl(drng, &data, DATALEN, &addtl); | 
 |  * crypto_free_rng(drng); | 
 |  * | 
 |  * | 
 |  * Usage with personalization and additional information strings | 
 |  * ------------------------------------------------------------- | 
 |  * Just mix both scenarios above. | 
 |  */ | 
 |  | 
 | #include <crypto/drbg.h> | 
 | #include <linux/kernel.h> | 
 |  | 
 | /*************************************************************** | 
 |  * Backend cipher definitions available to DRBG | 
 |  ***************************************************************/ | 
 |  | 
 | /* | 
 |  * The order of the DRBG definitions here matter: every DRBG is registered | 
 |  * as stdrng. Each DRBG receives an increasing cra_priority values the later | 
 |  * they are defined in this array (see drbg_fill_array). | 
 |  * | 
 |  * HMAC DRBGs are favored over Hash DRBGs over CTR DRBGs, and | 
 |  * the SHA256 / AES 256 over other ciphers. Thus, the favored | 
 |  * DRBGs are the latest entries in this array. | 
 |  */ | 
 | static const struct drbg_core drbg_cores[] = { | 
 | #ifdef CONFIG_CRYPTO_DRBG_CTR | 
 | 	{ | 
 | 		.flags = DRBG_CTR | DRBG_STRENGTH128, | 
 | 		.statelen = 32, /* 256 bits as defined in 10.2.1 */ | 
 | 		.blocklen_bytes = 16, | 
 | 		.cra_name = "ctr_aes128", | 
 | 		.backend_cra_name = "aes", | 
 | 	}, { | 
 | 		.flags = DRBG_CTR | DRBG_STRENGTH192, | 
 | 		.statelen = 40, /* 320 bits as defined in 10.2.1 */ | 
 | 		.blocklen_bytes = 16, | 
 | 		.cra_name = "ctr_aes192", | 
 | 		.backend_cra_name = "aes", | 
 | 	}, { | 
 | 		.flags = DRBG_CTR | DRBG_STRENGTH256, | 
 | 		.statelen = 48, /* 384 bits as defined in 10.2.1 */ | 
 | 		.blocklen_bytes = 16, | 
 | 		.cra_name = "ctr_aes256", | 
 | 		.backend_cra_name = "aes", | 
 | 	}, | 
 | #endif /* CONFIG_CRYPTO_DRBG_CTR */ | 
 | #ifdef CONFIG_CRYPTO_DRBG_HASH | 
 | 	{ | 
 | 		.flags = DRBG_HASH | DRBG_STRENGTH128, | 
 | 		.statelen = 55, /* 440 bits */ | 
 | 		.blocklen_bytes = 20, | 
 | 		.cra_name = "sha1", | 
 | 		.backend_cra_name = "sha1", | 
 | 	}, { | 
 | 		.flags = DRBG_HASH | DRBG_STRENGTH256, | 
 | 		.statelen = 111, /* 888 bits */ | 
 | 		.blocklen_bytes = 48, | 
 | 		.cra_name = "sha384", | 
 | 		.backend_cra_name = "sha384", | 
 | 	}, { | 
 | 		.flags = DRBG_HASH | DRBG_STRENGTH256, | 
 | 		.statelen = 111, /* 888 bits */ | 
 | 		.blocklen_bytes = 64, | 
 | 		.cra_name = "sha512", | 
 | 		.backend_cra_name = "sha512", | 
 | 	}, { | 
 | 		.flags = DRBG_HASH | DRBG_STRENGTH256, | 
 | 		.statelen = 55, /* 440 bits */ | 
 | 		.blocklen_bytes = 32, | 
 | 		.cra_name = "sha256", | 
 | 		.backend_cra_name = "sha256", | 
 | 	}, | 
 | #endif /* CONFIG_CRYPTO_DRBG_HASH */ | 
 | #ifdef CONFIG_CRYPTO_DRBG_HMAC | 
 | 	{ | 
 | 		.flags = DRBG_HMAC | DRBG_STRENGTH128, | 
 | 		.statelen = 20, /* block length of cipher */ | 
 | 		.blocklen_bytes = 20, | 
 | 		.cra_name = "hmac_sha1", | 
 | 		.backend_cra_name = "hmac(sha1)", | 
 | 	}, { | 
 | 		.flags = DRBG_HMAC | DRBG_STRENGTH256, | 
 | 		.statelen = 48, /* block length of cipher */ | 
 | 		.blocklen_bytes = 48, | 
 | 		.cra_name = "hmac_sha384", | 
 | 		.backend_cra_name = "hmac(sha384)", | 
 | 	}, { | 
 | 		.flags = DRBG_HMAC | DRBG_STRENGTH256, | 
 | 		.statelen = 64, /* block length of cipher */ | 
 | 		.blocklen_bytes = 64, | 
 | 		.cra_name = "hmac_sha512", | 
 | 		.backend_cra_name = "hmac(sha512)", | 
 | 	}, { | 
 | 		.flags = DRBG_HMAC | DRBG_STRENGTH256, | 
 | 		.statelen = 32, /* block length of cipher */ | 
 | 		.blocklen_bytes = 32, | 
 | 		.cra_name = "hmac_sha256", | 
 | 		.backend_cra_name = "hmac(sha256)", | 
 | 	}, | 
 | #endif /* CONFIG_CRYPTO_DRBG_HMAC */ | 
 | }; | 
 |  | 
 | static int drbg_uninstantiate(struct drbg_state *drbg); | 
 |  | 
 | /****************************************************************** | 
 |  * Generic helper functions | 
 |  ******************************************************************/ | 
 |  | 
 | /* | 
 |  * Return strength of DRBG according to SP800-90A section 8.4 | 
 |  * | 
 |  * @flags DRBG flags reference | 
 |  * | 
 |  * Return: normalized strength in *bytes* value or 32 as default | 
 |  *	   to counter programming errors | 
 |  */ | 
 | static inline unsigned short drbg_sec_strength(drbg_flag_t flags) | 
 | { | 
 | 	switch (flags & DRBG_STRENGTH_MASK) { | 
 | 	case DRBG_STRENGTH128: | 
 | 		return 16; | 
 | 	case DRBG_STRENGTH192: | 
 | 		return 24; | 
 | 	case DRBG_STRENGTH256: | 
 | 		return 32; | 
 | 	default: | 
 | 		return 32; | 
 | 	} | 
 | } | 
 |  | 
 | /* | 
 |  * FIPS 140-2 continuous self test for the noise source | 
 |  * The test is performed on the noise source input data. Thus, the function | 
 |  * implicitly knows the size of the buffer to be equal to the security | 
 |  * strength. | 
 |  * | 
 |  * Note, this function disregards the nonce trailing the entropy data during | 
 |  * initial seeding. | 
 |  * | 
 |  * drbg->drbg_mutex must have been taken. | 
 |  * | 
 |  * @drbg DRBG handle | 
 |  * @entropy buffer of seed data to be checked | 
 |  * | 
 |  * return: | 
 |  *	0 on success | 
 |  *	-EAGAIN on when the CTRNG is not yet primed | 
 |  *	< 0 on error | 
 |  */ | 
 | static int drbg_fips_continuous_test(struct drbg_state *drbg, | 
 | 				     const unsigned char *entropy) | 
 | { | 
 | 	unsigned short entropylen = drbg_sec_strength(drbg->core->flags); | 
 | 	int ret = 0; | 
 |  | 
 | 	if (!IS_ENABLED(CONFIG_CRYPTO_FIPS)) | 
 | 		return 0; | 
 |  | 
 | 	/* skip test if we test the overall system */ | 
 | 	if (list_empty(&drbg->test_data.list)) | 
 | 		return 0; | 
 | 	/* only perform test in FIPS mode */ | 
 | 	if (!fips_enabled) | 
 | 		return 0; | 
 |  | 
 | 	if (!drbg->fips_primed) { | 
 | 		/* Priming of FIPS test */ | 
 | 		memcpy(drbg->prev, entropy, entropylen); | 
 | 		drbg->fips_primed = true; | 
 | 		/* priming: another round is needed */ | 
 | 		return -EAGAIN; | 
 | 	} | 
 | 	ret = memcmp(drbg->prev, entropy, entropylen); | 
 | 	if (!ret) | 
 | 		panic("DRBG continuous self test failed\n"); | 
 | 	memcpy(drbg->prev, entropy, entropylen); | 
 |  | 
 | 	/* the test shall pass when the two values are not equal */ | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * Convert an integer into a byte representation of this integer. | 
 |  * The byte representation is big-endian | 
 |  * | 
 |  * @val value to be converted | 
 |  * @buf buffer holding the converted integer -- caller must ensure that | 
 |  *      buffer size is at least 32 bit | 
 |  */ | 
 | #if (defined(CONFIG_CRYPTO_DRBG_HASH) || defined(CONFIG_CRYPTO_DRBG_CTR)) | 
 | static inline void drbg_cpu_to_be32(__u32 val, unsigned char *buf) | 
 | { | 
 | 	struct s { | 
 | 		__be32 conv; | 
 | 	}; | 
 | 	struct s *conversion = (struct s *) buf; | 
 |  | 
 | 	conversion->conv = cpu_to_be32(val); | 
 | } | 
 | #endif /* defined(CONFIG_CRYPTO_DRBG_HASH) || defined(CONFIG_CRYPTO_DRBG_CTR) */ | 
 |  | 
 | /****************************************************************** | 
 |  * CTR DRBG callback functions | 
 |  ******************************************************************/ | 
 |  | 
 | #ifdef CONFIG_CRYPTO_DRBG_CTR | 
 | #define CRYPTO_DRBG_CTR_STRING "CTR " | 
 | MODULE_ALIAS_CRYPTO("drbg_pr_ctr_aes256"); | 
 | MODULE_ALIAS_CRYPTO("drbg_nopr_ctr_aes256"); | 
 | MODULE_ALIAS_CRYPTO("drbg_pr_ctr_aes192"); | 
 | MODULE_ALIAS_CRYPTO("drbg_nopr_ctr_aes192"); | 
 | MODULE_ALIAS_CRYPTO("drbg_pr_ctr_aes128"); | 
 | MODULE_ALIAS_CRYPTO("drbg_nopr_ctr_aes128"); | 
 |  | 
 | static void drbg_kcapi_symsetkey(struct drbg_state *drbg, | 
 | 				 const unsigned char *key); | 
 | static int drbg_kcapi_sym(struct drbg_state *drbg, unsigned char *outval, | 
 | 			  const struct drbg_string *in); | 
 | static int drbg_init_sym_kernel(struct drbg_state *drbg); | 
 | static int drbg_fini_sym_kernel(struct drbg_state *drbg); | 
 | static int drbg_kcapi_sym_ctr(struct drbg_state *drbg, | 
 | 			      u8 *inbuf, u32 inbuflen, | 
 | 			      u8 *outbuf, u32 outlen); | 
 | #define DRBG_OUTSCRATCHLEN 256 | 
 |  | 
 | /* BCC function for CTR DRBG as defined in 10.4.3 */ | 
 | static int drbg_ctr_bcc(struct drbg_state *drbg, | 
 | 			unsigned char *out, const unsigned char *key, | 
 | 			struct list_head *in) | 
 | { | 
 | 	int ret = 0; | 
 | 	struct drbg_string *curr = NULL; | 
 | 	struct drbg_string data; | 
 | 	short cnt = 0; | 
 |  | 
 | 	drbg_string_fill(&data, out, drbg_blocklen(drbg)); | 
 |  | 
 | 	/* 10.4.3 step 2 / 4 */ | 
 | 	drbg_kcapi_symsetkey(drbg, key); | 
 | 	list_for_each_entry(curr, in, list) { | 
 | 		const unsigned char *pos = curr->buf; | 
 | 		size_t len = curr->len; | 
 | 		/* 10.4.3 step 4.1 */ | 
 | 		while (len) { | 
 | 			/* 10.4.3 step 4.2 */ | 
 | 			if (drbg_blocklen(drbg) == cnt) { | 
 | 				cnt = 0; | 
 | 				ret = drbg_kcapi_sym(drbg, out, &data); | 
 | 				if (ret) | 
 | 					return ret; | 
 | 			} | 
 | 			out[cnt] ^= *pos; | 
 | 			pos++; | 
 | 			cnt++; | 
 | 			len--; | 
 | 		} | 
 | 	} | 
 | 	/* 10.4.3 step 4.2 for last block */ | 
 | 	if (cnt) | 
 | 		ret = drbg_kcapi_sym(drbg, out, &data); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* | 
 |  * scratchpad usage: drbg_ctr_update is interlinked with drbg_ctr_df | 
 |  * (and drbg_ctr_bcc, but this function does not need any temporary buffers), | 
 |  * the scratchpad is used as follows: | 
 |  * drbg_ctr_update: | 
 |  *	temp | 
 |  *		start: drbg->scratchpad | 
 |  *		length: drbg_statelen(drbg) + drbg_blocklen(drbg) | 
 |  *			note: the cipher writing into this variable works | 
 |  *			blocklen-wise. Now, when the statelen is not a multiple | 
 |  *			of blocklen, the generateion loop below "spills over" | 
 |  *			by at most blocklen. Thus, we need to give sufficient | 
 |  *			memory. | 
 |  *	df_data | 
 |  *		start: drbg->scratchpad + | 
 |  *				drbg_statelen(drbg) + drbg_blocklen(drbg) | 
 |  *		length: drbg_statelen(drbg) | 
 |  * | 
 |  * drbg_ctr_df: | 
 |  *	pad | 
 |  *		start: df_data + drbg_statelen(drbg) | 
 |  *		length: drbg_blocklen(drbg) | 
 |  *	iv | 
 |  *		start: pad + drbg_blocklen(drbg) | 
 |  *		length: drbg_blocklen(drbg) | 
 |  *	temp | 
 |  *		start: iv + drbg_blocklen(drbg) | 
 |  *		length: drbg_satelen(drbg) + drbg_blocklen(drbg) | 
 |  *			note: temp is the buffer that the BCC function operates | 
 |  *			on. BCC operates blockwise. drbg_statelen(drbg) | 
 |  *			is sufficient when the DRBG state length is a multiple | 
 |  *			of the block size. For AES192 (and maybe other ciphers) | 
 |  *			this is not correct and the length for temp is | 
 |  *			insufficient (yes, that also means for such ciphers, | 
 |  *			the final output of all BCC rounds are truncated). | 
 |  *			Therefore, add drbg_blocklen(drbg) to cover all | 
 |  *			possibilities. | 
 |  */ | 
 |  | 
 | /* Derivation Function for CTR DRBG as defined in 10.4.2 */ | 
 | static int drbg_ctr_df(struct drbg_state *drbg, | 
 | 		       unsigned char *df_data, size_t bytes_to_return, | 
 | 		       struct list_head *seedlist) | 
 | { | 
 | 	int ret = -EFAULT; | 
 | 	unsigned char L_N[8]; | 
 | 	/* S3 is input */ | 
 | 	struct drbg_string S1, S2, S4, cipherin; | 
 | 	LIST_HEAD(bcc_list); | 
 | 	unsigned char *pad = df_data + drbg_statelen(drbg); | 
 | 	unsigned char *iv = pad + drbg_blocklen(drbg); | 
 | 	unsigned char *temp = iv + drbg_blocklen(drbg); | 
 | 	size_t padlen = 0; | 
 | 	unsigned int templen = 0; | 
 | 	/* 10.4.2 step 7 */ | 
 | 	unsigned int i = 0; | 
 | 	/* 10.4.2 step 8 */ | 
 | 	const unsigned char *K = (unsigned char *) | 
 | 			   "\x00\x01\x02\x03\x04\x05\x06\x07" | 
 | 			   "\x08\x09\x0a\x0b\x0c\x0d\x0e\x0f" | 
 | 			   "\x10\x11\x12\x13\x14\x15\x16\x17" | 
 | 			   "\x18\x19\x1a\x1b\x1c\x1d\x1e\x1f"; | 
 | 	unsigned char *X; | 
 | 	size_t generated_len = 0; | 
 | 	size_t inputlen = 0; | 
 | 	struct drbg_string *seed = NULL; | 
 |  | 
 | 	memset(pad, 0, drbg_blocklen(drbg)); | 
 | 	memset(iv, 0, drbg_blocklen(drbg)); | 
 |  | 
 | 	/* 10.4.2 step 1 is implicit as we work byte-wise */ | 
 |  | 
 | 	/* 10.4.2 step 2 */ | 
 | 	if ((512/8) < bytes_to_return) | 
 | 		return -EINVAL; | 
 |  | 
 | 	/* 10.4.2 step 2 -- calculate the entire length of all input data */ | 
 | 	list_for_each_entry(seed, seedlist, list) | 
 | 		inputlen += seed->len; | 
 | 	drbg_cpu_to_be32(inputlen, &L_N[0]); | 
 |  | 
 | 	/* 10.4.2 step 3 */ | 
 | 	drbg_cpu_to_be32(bytes_to_return, &L_N[4]); | 
 |  | 
 | 	/* 10.4.2 step 5: length is L_N, input_string, one byte, padding */ | 
 | 	padlen = (inputlen + sizeof(L_N) + 1) % (drbg_blocklen(drbg)); | 
 | 	/* wrap the padlen appropriately */ | 
 | 	if (padlen) | 
 | 		padlen = drbg_blocklen(drbg) - padlen; | 
 | 	/* | 
 | 	 * pad / padlen contains the 0x80 byte and the following zero bytes. | 
 | 	 * As the calculated padlen value only covers the number of zero | 
 | 	 * bytes, this value has to be incremented by one for the 0x80 byte. | 
 | 	 */ | 
 | 	padlen++; | 
 | 	pad[0] = 0x80; | 
 |  | 
 | 	/* 10.4.2 step 4 -- first fill the linked list and then order it */ | 
 | 	drbg_string_fill(&S1, iv, drbg_blocklen(drbg)); | 
 | 	list_add_tail(&S1.list, &bcc_list); | 
 | 	drbg_string_fill(&S2, L_N, sizeof(L_N)); | 
 | 	list_add_tail(&S2.list, &bcc_list); | 
 | 	list_splice_tail(seedlist, &bcc_list); | 
 | 	drbg_string_fill(&S4, pad, padlen); | 
 | 	list_add_tail(&S4.list, &bcc_list); | 
 |  | 
 | 	/* 10.4.2 step 9 */ | 
 | 	while (templen < (drbg_keylen(drbg) + (drbg_blocklen(drbg)))) { | 
 | 		/* | 
 | 		 * 10.4.2 step 9.1 - the padding is implicit as the buffer | 
 | 		 * holds zeros after allocation -- even the increment of i | 
 | 		 * is irrelevant as the increment remains within length of i | 
 | 		 */ | 
 | 		drbg_cpu_to_be32(i, iv); | 
 | 		/* 10.4.2 step 9.2 -- BCC and concatenation with temp */ | 
 | 		ret = drbg_ctr_bcc(drbg, temp + templen, K, &bcc_list); | 
 | 		if (ret) | 
 | 			goto out; | 
 | 		/* 10.4.2 step 9.3 */ | 
 | 		i++; | 
 | 		templen += drbg_blocklen(drbg); | 
 | 	} | 
 |  | 
 | 	/* 10.4.2 step 11 */ | 
 | 	X = temp + (drbg_keylen(drbg)); | 
 | 	drbg_string_fill(&cipherin, X, drbg_blocklen(drbg)); | 
 |  | 
 | 	/* 10.4.2 step 12: overwriting of outval is implemented in next step */ | 
 |  | 
 | 	/* 10.4.2 step 13 */ | 
 | 	drbg_kcapi_symsetkey(drbg, temp); | 
 | 	while (generated_len < bytes_to_return) { | 
 | 		short blocklen = 0; | 
 | 		/* | 
 | 		 * 10.4.2 step 13.1: the truncation of the key length is | 
 | 		 * implicit as the key is only drbg_blocklen in size based on | 
 | 		 * the implementation of the cipher function callback | 
 | 		 */ | 
 | 		ret = drbg_kcapi_sym(drbg, X, &cipherin); | 
 | 		if (ret) | 
 | 			goto out; | 
 | 		blocklen = (drbg_blocklen(drbg) < | 
 | 				(bytes_to_return - generated_len)) ? | 
 | 			    drbg_blocklen(drbg) : | 
 | 				(bytes_to_return - generated_len); | 
 | 		/* 10.4.2 step 13.2 and 14 */ | 
 | 		memcpy(df_data + generated_len, X, blocklen); | 
 | 		generated_len += blocklen; | 
 | 	} | 
 |  | 
 | 	ret = 0; | 
 |  | 
 | out: | 
 | 	memset(iv, 0, drbg_blocklen(drbg)); | 
 | 	memset(temp, 0, drbg_statelen(drbg) + drbg_blocklen(drbg)); | 
 | 	memset(pad, 0, drbg_blocklen(drbg)); | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* | 
 |  * update function of CTR DRBG as defined in 10.2.1.2 | 
 |  * | 
 |  * The reseed variable has an enhanced meaning compared to the update | 
 |  * functions of the other DRBGs as follows: | 
 |  * 0 => initial seed from initialization | 
 |  * 1 => reseed via drbg_seed | 
 |  * 2 => first invocation from drbg_ctr_update when addtl is present. In | 
 |  *      this case, the df_data scratchpad is not deleted so that it is | 
 |  *      available for another calls to prevent calling the DF function | 
 |  *      again. | 
 |  * 3 => second invocation from drbg_ctr_update. When the update function | 
 |  *      was called with addtl, the df_data memory already contains the | 
 |  *      DFed addtl information and we do not need to call DF again. | 
 |  */ | 
 | static int drbg_ctr_update(struct drbg_state *drbg, struct list_head *seed, | 
 | 			   int reseed) | 
 | { | 
 | 	int ret = -EFAULT; | 
 | 	/* 10.2.1.2 step 1 */ | 
 | 	unsigned char *temp = drbg->scratchpad; | 
 | 	unsigned char *df_data = drbg->scratchpad + drbg_statelen(drbg) + | 
 | 				 drbg_blocklen(drbg); | 
 |  | 
 | 	if (3 > reseed) | 
 | 		memset(df_data, 0, drbg_statelen(drbg)); | 
 |  | 
 | 	if (!reseed) { | 
 | 		/* | 
 | 		 * The DRBG uses the CTR mode of the underlying AES cipher. The | 
 | 		 * CTR mode increments the counter value after the AES operation | 
 | 		 * but SP800-90A requires that the counter is incremented before | 
 | 		 * the AES operation. Hence, we increment it at the time we set | 
 | 		 * it by one. | 
 | 		 */ | 
 | 		crypto_inc(drbg->V, drbg_blocklen(drbg)); | 
 |  | 
 | 		ret = crypto_skcipher_setkey(drbg->ctr_handle, drbg->C, | 
 | 					     drbg_keylen(drbg)); | 
 | 		if (ret) | 
 | 			goto out; | 
 | 	} | 
 |  | 
 | 	/* 10.2.1.3.2 step 2 and 10.2.1.4.2 step 2 */ | 
 | 	if (seed) { | 
 | 		ret = drbg_ctr_df(drbg, df_data, drbg_statelen(drbg), seed); | 
 | 		if (ret) | 
 | 			goto out; | 
 | 	} | 
 |  | 
 | 	ret = drbg_kcapi_sym_ctr(drbg, df_data, drbg_statelen(drbg), | 
 | 				 temp, drbg_statelen(drbg)); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	/* 10.2.1.2 step 5 */ | 
 | 	ret = crypto_skcipher_setkey(drbg->ctr_handle, temp, | 
 | 				     drbg_keylen(drbg)); | 
 | 	if (ret) | 
 | 		goto out; | 
 | 	/* 10.2.1.2 step 6 */ | 
 | 	memcpy(drbg->V, temp + drbg_keylen(drbg), drbg_blocklen(drbg)); | 
 | 	/* See above: increment counter by one to compensate timing of CTR op */ | 
 | 	crypto_inc(drbg->V, drbg_blocklen(drbg)); | 
 | 	ret = 0; | 
 |  | 
 | out: | 
 | 	memset(temp, 0, drbg_statelen(drbg) + drbg_blocklen(drbg)); | 
 | 	if (2 != reseed) | 
 | 		memset(df_data, 0, drbg_statelen(drbg)); | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* | 
 |  * scratchpad use: drbg_ctr_update is called independently from | 
 |  * drbg_ctr_extract_bytes. Therefore, the scratchpad is reused | 
 |  */ | 
 | /* Generate function of CTR DRBG as defined in 10.2.1.5.2 */ | 
 | static int drbg_ctr_generate(struct drbg_state *drbg, | 
 | 			     unsigned char *buf, unsigned int buflen, | 
 | 			     struct list_head *addtl) | 
 | { | 
 | 	int ret; | 
 | 	int len = min_t(int, buflen, INT_MAX); | 
 |  | 
 | 	/* 10.2.1.5.2 step 2 */ | 
 | 	if (addtl && !list_empty(addtl)) { | 
 | 		ret = drbg_ctr_update(drbg, addtl, 2); | 
 | 		if (ret) | 
 | 			return 0; | 
 | 	} | 
 |  | 
 | 	/* 10.2.1.5.2 step 4.1 */ | 
 | 	ret = drbg_kcapi_sym_ctr(drbg, NULL, 0, buf, len); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	/* 10.2.1.5.2 step 6 */ | 
 | 	ret = drbg_ctr_update(drbg, NULL, 3); | 
 | 	if (ret) | 
 | 		len = ret; | 
 |  | 
 | 	return len; | 
 | } | 
 |  | 
 | static const struct drbg_state_ops drbg_ctr_ops = { | 
 | 	.update		= drbg_ctr_update, | 
 | 	.generate	= drbg_ctr_generate, | 
 | 	.crypto_init	= drbg_init_sym_kernel, | 
 | 	.crypto_fini	= drbg_fini_sym_kernel, | 
 | }; | 
 | #endif /* CONFIG_CRYPTO_DRBG_CTR */ | 
 |  | 
 | /****************************************************************** | 
 |  * HMAC DRBG callback functions | 
 |  ******************************************************************/ | 
 |  | 
 | #if defined(CONFIG_CRYPTO_DRBG_HASH) || defined(CONFIG_CRYPTO_DRBG_HMAC) | 
 | static int drbg_kcapi_hash(struct drbg_state *drbg, unsigned char *outval, | 
 | 			   const struct list_head *in); | 
 | static void drbg_kcapi_hmacsetkey(struct drbg_state *drbg, | 
 | 				  const unsigned char *key); | 
 | static int drbg_init_hash_kernel(struct drbg_state *drbg); | 
 | static int drbg_fini_hash_kernel(struct drbg_state *drbg); | 
 | #endif /* (CONFIG_CRYPTO_DRBG_HASH || CONFIG_CRYPTO_DRBG_HMAC) */ | 
 |  | 
 | #ifdef CONFIG_CRYPTO_DRBG_HMAC | 
 | #define CRYPTO_DRBG_HMAC_STRING "HMAC " | 
 | MODULE_ALIAS_CRYPTO("drbg_pr_hmac_sha512"); | 
 | MODULE_ALIAS_CRYPTO("drbg_nopr_hmac_sha512"); | 
 | MODULE_ALIAS_CRYPTO("drbg_pr_hmac_sha384"); | 
 | MODULE_ALIAS_CRYPTO("drbg_nopr_hmac_sha384"); | 
 | MODULE_ALIAS_CRYPTO("drbg_pr_hmac_sha256"); | 
 | MODULE_ALIAS_CRYPTO("drbg_nopr_hmac_sha256"); | 
 | MODULE_ALIAS_CRYPTO("drbg_pr_hmac_sha1"); | 
 | MODULE_ALIAS_CRYPTO("drbg_nopr_hmac_sha1"); | 
 |  | 
 | /* update function of HMAC DRBG as defined in 10.1.2.2 */ | 
 | static int drbg_hmac_update(struct drbg_state *drbg, struct list_head *seed, | 
 | 			    int reseed) | 
 | { | 
 | 	int ret = -EFAULT; | 
 | 	int i = 0; | 
 | 	struct drbg_string seed1, seed2, vdata; | 
 | 	LIST_HEAD(seedlist); | 
 | 	LIST_HEAD(vdatalist); | 
 |  | 
 | 	if (!reseed) { | 
 | 		/* 10.1.2.3 step 2 -- memset(0) of C is implicit with kzalloc */ | 
 | 		memset(drbg->V, 1, drbg_statelen(drbg)); | 
 | 		drbg_kcapi_hmacsetkey(drbg, drbg->C); | 
 | 	} | 
 |  | 
 | 	drbg_string_fill(&seed1, drbg->V, drbg_statelen(drbg)); | 
 | 	list_add_tail(&seed1.list, &seedlist); | 
 | 	/* buffer of seed2 will be filled in for loop below with one byte */ | 
 | 	drbg_string_fill(&seed2, NULL, 1); | 
 | 	list_add_tail(&seed2.list, &seedlist); | 
 | 	/* input data of seed is allowed to be NULL at this point */ | 
 | 	if (seed) | 
 | 		list_splice_tail(seed, &seedlist); | 
 |  | 
 | 	drbg_string_fill(&vdata, drbg->V, drbg_statelen(drbg)); | 
 | 	list_add_tail(&vdata.list, &vdatalist); | 
 | 	for (i = 2; 0 < i; i--) { | 
 | 		/* first round uses 0x0, second 0x1 */ | 
 | 		unsigned char prefix = DRBG_PREFIX0; | 
 | 		if (1 == i) | 
 | 			prefix = DRBG_PREFIX1; | 
 | 		/* 10.1.2.2 step 1 and 4 -- concatenation and HMAC for key */ | 
 | 		seed2.buf = &prefix; | 
 | 		ret = drbg_kcapi_hash(drbg, drbg->C, &seedlist); | 
 | 		if (ret) | 
 | 			return ret; | 
 | 		drbg_kcapi_hmacsetkey(drbg, drbg->C); | 
 |  | 
 | 		/* 10.1.2.2 step 2 and 5 -- HMAC for V */ | 
 | 		ret = drbg_kcapi_hash(drbg, drbg->V, &vdatalist); | 
 | 		if (ret) | 
 | 			return ret; | 
 |  | 
 | 		/* 10.1.2.2 step 3 */ | 
 | 		if (!seed) | 
 | 			return ret; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* generate function of HMAC DRBG as defined in 10.1.2.5 */ | 
 | static int drbg_hmac_generate(struct drbg_state *drbg, | 
 | 			      unsigned char *buf, | 
 | 			      unsigned int buflen, | 
 | 			      struct list_head *addtl) | 
 | { | 
 | 	int len = 0; | 
 | 	int ret = 0; | 
 | 	struct drbg_string data; | 
 | 	LIST_HEAD(datalist); | 
 |  | 
 | 	/* 10.1.2.5 step 2 */ | 
 | 	if (addtl && !list_empty(addtl)) { | 
 | 		ret = drbg_hmac_update(drbg, addtl, 1); | 
 | 		if (ret) | 
 | 			return ret; | 
 | 	} | 
 |  | 
 | 	drbg_string_fill(&data, drbg->V, drbg_statelen(drbg)); | 
 | 	list_add_tail(&data.list, &datalist); | 
 | 	while (len < buflen) { | 
 | 		unsigned int outlen = 0; | 
 | 		/* 10.1.2.5 step 4.1 */ | 
 | 		ret = drbg_kcapi_hash(drbg, drbg->V, &datalist); | 
 | 		if (ret) | 
 | 			return ret; | 
 | 		outlen = (drbg_blocklen(drbg) < (buflen - len)) ? | 
 | 			  drbg_blocklen(drbg) : (buflen - len); | 
 |  | 
 | 		/* 10.1.2.5 step 4.2 */ | 
 | 		memcpy(buf + len, drbg->V, outlen); | 
 | 		len += outlen; | 
 | 	} | 
 |  | 
 | 	/* 10.1.2.5 step 6 */ | 
 | 	if (addtl && !list_empty(addtl)) | 
 | 		ret = drbg_hmac_update(drbg, addtl, 1); | 
 | 	else | 
 | 		ret = drbg_hmac_update(drbg, NULL, 1); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	return len; | 
 | } | 
 |  | 
 | static const struct drbg_state_ops drbg_hmac_ops = { | 
 | 	.update		= drbg_hmac_update, | 
 | 	.generate	= drbg_hmac_generate, | 
 | 	.crypto_init	= drbg_init_hash_kernel, | 
 | 	.crypto_fini	= drbg_fini_hash_kernel, | 
 | }; | 
 | #endif /* CONFIG_CRYPTO_DRBG_HMAC */ | 
 |  | 
 | /****************************************************************** | 
 |  * Hash DRBG callback functions | 
 |  ******************************************************************/ | 
 |  | 
 | #ifdef CONFIG_CRYPTO_DRBG_HASH | 
 | #define CRYPTO_DRBG_HASH_STRING "HASH " | 
 | MODULE_ALIAS_CRYPTO("drbg_pr_sha512"); | 
 | MODULE_ALIAS_CRYPTO("drbg_nopr_sha512"); | 
 | MODULE_ALIAS_CRYPTO("drbg_pr_sha384"); | 
 | MODULE_ALIAS_CRYPTO("drbg_nopr_sha384"); | 
 | MODULE_ALIAS_CRYPTO("drbg_pr_sha256"); | 
 | MODULE_ALIAS_CRYPTO("drbg_nopr_sha256"); | 
 | MODULE_ALIAS_CRYPTO("drbg_pr_sha1"); | 
 | MODULE_ALIAS_CRYPTO("drbg_nopr_sha1"); | 
 |  | 
 | /* | 
 |  * Increment buffer | 
 |  * | 
 |  * @dst buffer to increment | 
 |  * @add value to add | 
 |  */ | 
 | static inline void drbg_add_buf(unsigned char *dst, size_t dstlen, | 
 | 				const unsigned char *add, size_t addlen) | 
 | { | 
 | 	/* implied: dstlen > addlen */ | 
 | 	unsigned char *dstptr; | 
 | 	const unsigned char *addptr; | 
 | 	unsigned int remainder = 0; | 
 | 	size_t len = addlen; | 
 |  | 
 | 	dstptr = dst + (dstlen-1); | 
 | 	addptr = add + (addlen-1); | 
 | 	while (len) { | 
 | 		remainder += *dstptr + *addptr; | 
 | 		*dstptr = remainder & 0xff; | 
 | 		remainder >>= 8; | 
 | 		len--; dstptr--; addptr--; | 
 | 	} | 
 | 	len = dstlen - addlen; | 
 | 	while (len && remainder > 0) { | 
 | 		remainder = *dstptr + 1; | 
 | 		*dstptr = remainder & 0xff; | 
 | 		remainder >>= 8; | 
 | 		len--; dstptr--; | 
 | 	} | 
 | } | 
 |  | 
 | /* | 
 |  * scratchpad usage: as drbg_hash_update and drbg_hash_df are used | 
 |  * interlinked, the scratchpad is used as follows: | 
 |  * drbg_hash_update | 
 |  *	start: drbg->scratchpad | 
 |  *	length: drbg_statelen(drbg) | 
 |  * drbg_hash_df: | 
 |  *	start: drbg->scratchpad + drbg_statelen(drbg) | 
 |  *	length: drbg_blocklen(drbg) | 
 |  * | 
 |  * drbg_hash_process_addtl uses the scratchpad, but fully completes | 
 |  * before either of the functions mentioned before are invoked. Therefore, | 
 |  * drbg_hash_process_addtl does not need to be specifically considered. | 
 |  */ | 
 |  | 
 | /* Derivation Function for Hash DRBG as defined in 10.4.1 */ | 
 | static int drbg_hash_df(struct drbg_state *drbg, | 
 | 			unsigned char *outval, size_t outlen, | 
 | 			struct list_head *entropylist) | 
 | { | 
 | 	int ret = 0; | 
 | 	size_t len = 0; | 
 | 	unsigned char input[5]; | 
 | 	unsigned char *tmp = drbg->scratchpad + drbg_statelen(drbg); | 
 | 	struct drbg_string data; | 
 |  | 
 | 	/* 10.4.1 step 3 */ | 
 | 	input[0] = 1; | 
 | 	drbg_cpu_to_be32((outlen * 8), &input[1]); | 
 |  | 
 | 	/* 10.4.1 step 4.1 -- concatenation of data for input into hash */ | 
 | 	drbg_string_fill(&data, input, 5); | 
 | 	list_add(&data.list, entropylist); | 
 |  | 
 | 	/* 10.4.1 step 4 */ | 
 | 	while (len < outlen) { | 
 | 		short blocklen = 0; | 
 | 		/* 10.4.1 step 4.1 */ | 
 | 		ret = drbg_kcapi_hash(drbg, tmp, entropylist); | 
 | 		if (ret) | 
 | 			goto out; | 
 | 		/* 10.4.1 step 4.2 */ | 
 | 		input[0]++; | 
 | 		blocklen = (drbg_blocklen(drbg) < (outlen - len)) ? | 
 | 			    drbg_blocklen(drbg) : (outlen - len); | 
 | 		memcpy(outval + len, tmp, blocklen); | 
 | 		len += blocklen; | 
 | 	} | 
 |  | 
 | out: | 
 | 	memset(tmp, 0, drbg_blocklen(drbg)); | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* update function for Hash DRBG as defined in 10.1.1.2 / 10.1.1.3 */ | 
 | static int drbg_hash_update(struct drbg_state *drbg, struct list_head *seed, | 
 | 			    int reseed) | 
 | { | 
 | 	int ret = 0; | 
 | 	struct drbg_string data1, data2; | 
 | 	LIST_HEAD(datalist); | 
 | 	LIST_HEAD(datalist2); | 
 | 	unsigned char *V = drbg->scratchpad; | 
 | 	unsigned char prefix = DRBG_PREFIX1; | 
 |  | 
 | 	if (!seed) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (reseed) { | 
 | 		/* 10.1.1.3 step 1 */ | 
 | 		memcpy(V, drbg->V, drbg_statelen(drbg)); | 
 | 		drbg_string_fill(&data1, &prefix, 1); | 
 | 		list_add_tail(&data1.list, &datalist); | 
 | 		drbg_string_fill(&data2, V, drbg_statelen(drbg)); | 
 | 		list_add_tail(&data2.list, &datalist); | 
 | 	} | 
 | 	list_splice_tail(seed, &datalist); | 
 |  | 
 | 	/* 10.1.1.2 / 10.1.1.3 step 2 and 3 */ | 
 | 	ret = drbg_hash_df(drbg, drbg->V, drbg_statelen(drbg), &datalist); | 
 | 	if (ret) | 
 | 		goto out; | 
 |  | 
 | 	/* 10.1.1.2 / 10.1.1.3 step 4  */ | 
 | 	prefix = DRBG_PREFIX0; | 
 | 	drbg_string_fill(&data1, &prefix, 1); | 
 | 	list_add_tail(&data1.list, &datalist2); | 
 | 	drbg_string_fill(&data2, drbg->V, drbg_statelen(drbg)); | 
 | 	list_add_tail(&data2.list, &datalist2); | 
 | 	/* 10.1.1.2 / 10.1.1.3 step 4 */ | 
 | 	ret = drbg_hash_df(drbg, drbg->C, drbg_statelen(drbg), &datalist2); | 
 |  | 
 | out: | 
 | 	memset(drbg->scratchpad, 0, drbg_statelen(drbg)); | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* processing of additional information string for Hash DRBG */ | 
 | static int drbg_hash_process_addtl(struct drbg_state *drbg, | 
 | 				   struct list_head *addtl) | 
 | { | 
 | 	int ret = 0; | 
 | 	struct drbg_string data1, data2; | 
 | 	LIST_HEAD(datalist); | 
 | 	unsigned char prefix = DRBG_PREFIX2; | 
 |  | 
 | 	/* 10.1.1.4 step 2 */ | 
 | 	if (!addtl || list_empty(addtl)) | 
 | 		return 0; | 
 |  | 
 | 	/* 10.1.1.4 step 2a */ | 
 | 	drbg_string_fill(&data1, &prefix, 1); | 
 | 	drbg_string_fill(&data2, drbg->V, drbg_statelen(drbg)); | 
 | 	list_add_tail(&data1.list, &datalist); | 
 | 	list_add_tail(&data2.list, &datalist); | 
 | 	list_splice_tail(addtl, &datalist); | 
 | 	ret = drbg_kcapi_hash(drbg, drbg->scratchpad, &datalist); | 
 | 	if (ret) | 
 | 		goto out; | 
 |  | 
 | 	/* 10.1.1.4 step 2b */ | 
 | 	drbg_add_buf(drbg->V, drbg_statelen(drbg), | 
 | 		     drbg->scratchpad, drbg_blocklen(drbg)); | 
 |  | 
 | out: | 
 | 	memset(drbg->scratchpad, 0, drbg_blocklen(drbg)); | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* Hashgen defined in 10.1.1.4 */ | 
 | static int drbg_hash_hashgen(struct drbg_state *drbg, | 
 | 			     unsigned char *buf, | 
 | 			     unsigned int buflen) | 
 | { | 
 | 	int len = 0; | 
 | 	int ret = 0; | 
 | 	unsigned char *src = drbg->scratchpad; | 
 | 	unsigned char *dst = drbg->scratchpad + drbg_statelen(drbg); | 
 | 	struct drbg_string data; | 
 | 	LIST_HEAD(datalist); | 
 |  | 
 | 	/* 10.1.1.4 step hashgen 2 */ | 
 | 	memcpy(src, drbg->V, drbg_statelen(drbg)); | 
 |  | 
 | 	drbg_string_fill(&data, src, drbg_statelen(drbg)); | 
 | 	list_add_tail(&data.list, &datalist); | 
 | 	while (len < buflen) { | 
 | 		unsigned int outlen = 0; | 
 | 		/* 10.1.1.4 step hashgen 4.1 */ | 
 | 		ret = drbg_kcapi_hash(drbg, dst, &datalist); | 
 | 		if (ret) { | 
 | 			len = ret; | 
 | 			goto out; | 
 | 		} | 
 | 		outlen = (drbg_blocklen(drbg) < (buflen - len)) ? | 
 | 			  drbg_blocklen(drbg) : (buflen - len); | 
 | 		/* 10.1.1.4 step hashgen 4.2 */ | 
 | 		memcpy(buf + len, dst, outlen); | 
 | 		len += outlen; | 
 | 		/* 10.1.1.4 hashgen step 4.3 */ | 
 | 		if (len < buflen) | 
 | 			crypto_inc(src, drbg_statelen(drbg)); | 
 | 	} | 
 |  | 
 | out: | 
 | 	memset(drbg->scratchpad, 0, | 
 | 	       (drbg_statelen(drbg) + drbg_blocklen(drbg))); | 
 | 	return len; | 
 | } | 
 |  | 
 | /* generate function for Hash DRBG as defined in  10.1.1.4 */ | 
 | static int drbg_hash_generate(struct drbg_state *drbg, | 
 | 			      unsigned char *buf, unsigned int buflen, | 
 | 			      struct list_head *addtl) | 
 | { | 
 | 	int len = 0; | 
 | 	int ret = 0; | 
 | 	union { | 
 | 		unsigned char req[8]; | 
 | 		__be64 req_int; | 
 | 	} u; | 
 | 	unsigned char prefix = DRBG_PREFIX3; | 
 | 	struct drbg_string data1, data2; | 
 | 	LIST_HEAD(datalist); | 
 |  | 
 | 	/* 10.1.1.4 step 2 */ | 
 | 	ret = drbg_hash_process_addtl(drbg, addtl); | 
 | 	if (ret) | 
 | 		return ret; | 
 | 	/* 10.1.1.4 step 3 */ | 
 | 	len = drbg_hash_hashgen(drbg, buf, buflen); | 
 |  | 
 | 	/* this is the value H as documented in 10.1.1.4 */ | 
 | 	/* 10.1.1.4 step 4 */ | 
 | 	drbg_string_fill(&data1, &prefix, 1); | 
 | 	list_add_tail(&data1.list, &datalist); | 
 | 	drbg_string_fill(&data2, drbg->V, drbg_statelen(drbg)); | 
 | 	list_add_tail(&data2.list, &datalist); | 
 | 	ret = drbg_kcapi_hash(drbg, drbg->scratchpad, &datalist); | 
 | 	if (ret) { | 
 | 		len = ret; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	/* 10.1.1.4 step 5 */ | 
 | 	drbg_add_buf(drbg->V, drbg_statelen(drbg), | 
 | 		     drbg->scratchpad, drbg_blocklen(drbg)); | 
 | 	drbg_add_buf(drbg->V, drbg_statelen(drbg), | 
 | 		     drbg->C, drbg_statelen(drbg)); | 
 | 	u.req_int = cpu_to_be64(drbg->reseed_ctr); | 
 | 	drbg_add_buf(drbg->V, drbg_statelen(drbg), u.req, 8); | 
 |  | 
 | out: | 
 | 	memset(drbg->scratchpad, 0, drbg_blocklen(drbg)); | 
 | 	return len; | 
 | } | 
 |  | 
 | /* | 
 |  * scratchpad usage: as update and generate are used isolated, both | 
 |  * can use the scratchpad | 
 |  */ | 
 | static const struct drbg_state_ops drbg_hash_ops = { | 
 | 	.update		= drbg_hash_update, | 
 | 	.generate	= drbg_hash_generate, | 
 | 	.crypto_init	= drbg_init_hash_kernel, | 
 | 	.crypto_fini	= drbg_fini_hash_kernel, | 
 | }; | 
 | #endif /* CONFIG_CRYPTO_DRBG_HASH */ | 
 |  | 
 | /****************************************************************** | 
 |  * Functions common for DRBG implementations | 
 |  ******************************************************************/ | 
 |  | 
 | static inline int __drbg_seed(struct drbg_state *drbg, struct list_head *seed, | 
 | 			      int reseed, enum drbg_seed_state new_seed_state) | 
 | { | 
 | 	int ret = drbg->d_ops->update(drbg, seed, reseed); | 
 |  | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	drbg->seeded = new_seed_state; | 
 | 	/* 10.1.1.2 / 10.1.1.3 step 5 */ | 
 | 	drbg->reseed_ctr = 1; | 
 |  | 
 | 	switch (drbg->seeded) { | 
 | 	case DRBG_SEED_STATE_UNSEEDED: | 
 | 		/* Impossible, but handle it to silence compiler warnings. */ | 
 | 		fallthrough; | 
 | 	case DRBG_SEED_STATE_PARTIAL: | 
 | 		/* | 
 | 		 * Require frequent reseeds until the seed source is | 
 | 		 * fully initialized. | 
 | 		 */ | 
 | 		drbg->reseed_threshold = 50; | 
 | 		break; | 
 |  | 
 | 	case DRBG_SEED_STATE_FULL: | 
 | 		/* | 
 | 		 * Seed source has become fully initialized, frequent | 
 | 		 * reseeds no longer required. | 
 | 		 */ | 
 | 		drbg->reseed_threshold = drbg_max_requests(drbg); | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static inline int drbg_get_random_bytes(struct drbg_state *drbg, | 
 | 					unsigned char *entropy, | 
 | 					unsigned int entropylen) | 
 | { | 
 | 	int ret; | 
 |  | 
 | 	do { | 
 | 		get_random_bytes(entropy, entropylen); | 
 | 		ret = drbg_fips_continuous_test(drbg, entropy); | 
 | 		if (ret && ret != -EAGAIN) | 
 | 			return ret; | 
 | 	} while (ret); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int drbg_seed_from_random(struct drbg_state *drbg) | 
 | { | 
 | 	struct drbg_string data; | 
 | 	LIST_HEAD(seedlist); | 
 | 	unsigned int entropylen = drbg_sec_strength(drbg->core->flags); | 
 | 	unsigned char entropy[32]; | 
 | 	int ret; | 
 |  | 
 | 	BUG_ON(!entropylen); | 
 | 	BUG_ON(entropylen > sizeof(entropy)); | 
 |  | 
 | 	drbg_string_fill(&data, entropy, entropylen); | 
 | 	list_add_tail(&data.list, &seedlist); | 
 |  | 
 | 	ret = drbg_get_random_bytes(drbg, entropy, entropylen); | 
 | 	if (ret) | 
 | 		goto out; | 
 |  | 
 | 	ret = __drbg_seed(drbg, &seedlist, true, DRBG_SEED_STATE_FULL); | 
 |  | 
 | out: | 
 | 	memzero_explicit(entropy, entropylen); | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* | 
 |  * Seeding or reseeding of the DRBG | 
 |  * | 
 |  * @drbg: DRBG state struct | 
 |  * @pers: personalization / additional information buffer | 
 |  * @reseed: 0 for initial seed process, 1 for reseeding | 
 |  * | 
 |  * return: | 
 |  *	0 on success | 
 |  *	error value otherwise | 
 |  */ | 
 | static int drbg_seed(struct drbg_state *drbg, struct drbg_string *pers, | 
 | 		     bool reseed) | 
 | { | 
 | 	int ret; | 
 | 	unsigned char entropy[((32 + 16) * 2)]; | 
 | 	unsigned int entropylen = drbg_sec_strength(drbg->core->flags); | 
 | 	struct drbg_string data1; | 
 | 	LIST_HEAD(seedlist); | 
 | 	enum drbg_seed_state new_seed_state = DRBG_SEED_STATE_FULL; | 
 |  | 
 | 	/* 9.1 / 9.2 / 9.3.1 step 3 */ | 
 | 	if (pers && pers->len > (drbg_max_addtl(drbg))) { | 
 | 		pr_devel("DRBG: personalization string too long %zu\n", | 
 | 			 pers->len); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	if (list_empty(&drbg->test_data.list)) { | 
 | 		drbg_string_fill(&data1, drbg->test_data.buf, | 
 | 				 drbg->test_data.len); | 
 | 		pr_devel("DRBG: using test entropy\n"); | 
 | 	} else { | 
 | 		/* | 
 | 		 * Gather entropy equal to the security strength of the DRBG. | 
 | 		 * With a derivation function, a nonce is required in addition | 
 | 		 * to the entropy. A nonce must be at least 1/2 of the security | 
 | 		 * strength of the DRBG in size. Thus, entropy + nonce is 3/2 | 
 | 		 * of the strength. The consideration of a nonce is only | 
 | 		 * applicable during initial seeding. | 
 | 		 */ | 
 | 		BUG_ON(!entropylen); | 
 | 		if (!reseed) | 
 | 			entropylen = ((entropylen + 1) / 2) * 3; | 
 | 		BUG_ON((entropylen * 2) > sizeof(entropy)); | 
 |  | 
 | 		/* Get seed from in-kernel /dev/urandom */ | 
 | 		if (!rng_is_initialized()) | 
 | 			new_seed_state = DRBG_SEED_STATE_PARTIAL; | 
 |  | 
 | 		ret = drbg_get_random_bytes(drbg, entropy, entropylen); | 
 | 		if (ret) | 
 | 			goto out; | 
 |  | 
 | 		if (!drbg->jent) { | 
 | 			drbg_string_fill(&data1, entropy, entropylen); | 
 | 			pr_devel("DRBG: (re)seeding with %u bytes of entropy\n", | 
 | 				 entropylen); | 
 | 		} else { | 
 | 			/* Get seed from Jitter RNG */ | 
 | 			ret = crypto_rng_get_bytes(drbg->jent, | 
 | 						   entropy + entropylen, | 
 | 						   entropylen); | 
 | 			if (ret) { | 
 | 				pr_devel("DRBG: jent failed with %d\n", ret); | 
 |  | 
 | 				/* | 
 | 				 * Do not treat the transient failure of the | 
 | 				 * Jitter RNG as an error that needs to be | 
 | 				 * reported. The combined number of the | 
 | 				 * maximum reseed threshold times the maximum | 
 | 				 * number of Jitter RNG transient errors is | 
 | 				 * less than the reseed threshold required by | 
 | 				 * SP800-90A allowing us to treat the | 
 | 				 * transient errors as such. | 
 | 				 * | 
 | 				 * However, we mandate that at least the first | 
 | 				 * seeding operation must succeed with the | 
 | 				 * Jitter RNG. | 
 | 				 */ | 
 | 				if (!reseed || ret != -EAGAIN) | 
 | 					goto out; | 
 | 			} | 
 |  | 
 | 			drbg_string_fill(&data1, entropy, entropylen * 2); | 
 | 			pr_devel("DRBG: (re)seeding with %u bytes of entropy\n", | 
 | 				 entropylen * 2); | 
 | 		} | 
 | 	} | 
 | 	list_add_tail(&data1.list, &seedlist); | 
 |  | 
 | 	/* | 
 | 	 * concatenation of entropy with personalization str / addtl input) | 
 | 	 * the variable pers is directly handed in by the caller, so check its | 
 | 	 * contents whether it is appropriate | 
 | 	 */ | 
 | 	if (pers && pers->buf && 0 < pers->len) { | 
 | 		list_add_tail(&pers->list, &seedlist); | 
 | 		pr_devel("DRBG: using personalization string\n"); | 
 | 	} | 
 |  | 
 | 	if (!reseed) { | 
 | 		memset(drbg->V, 0, drbg_statelen(drbg)); | 
 | 		memset(drbg->C, 0, drbg_statelen(drbg)); | 
 | 	} | 
 |  | 
 | 	ret = __drbg_seed(drbg, &seedlist, reseed, new_seed_state); | 
 |  | 
 | out: | 
 | 	memzero_explicit(entropy, entropylen * 2); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* Free all substructures in a DRBG state without the DRBG state structure */ | 
 | static inline void drbg_dealloc_state(struct drbg_state *drbg) | 
 | { | 
 | 	if (!drbg) | 
 | 		return; | 
 | 	kzfree(drbg->Vbuf); | 
 | 	drbg->Vbuf = NULL; | 
 | 	drbg->V = NULL; | 
 | 	kzfree(drbg->Cbuf); | 
 | 	drbg->Cbuf = NULL; | 
 | 	drbg->C = NULL; | 
 | 	kzfree(drbg->scratchpadbuf); | 
 | 	drbg->scratchpadbuf = NULL; | 
 | 	drbg->reseed_ctr = 0; | 
 | 	drbg->d_ops = NULL; | 
 | 	drbg->core = NULL; | 
 | 	if (IS_ENABLED(CONFIG_CRYPTO_FIPS)) { | 
 | 		kzfree(drbg->prev); | 
 | 		drbg->prev = NULL; | 
 | 		drbg->fips_primed = false; | 
 | 	} | 
 | } | 
 |  | 
 | /* | 
 |  * Allocate all sub-structures for a DRBG state. | 
 |  * The DRBG state structure must already be allocated. | 
 |  */ | 
 | static inline int drbg_alloc_state(struct drbg_state *drbg) | 
 | { | 
 | 	int ret = -ENOMEM; | 
 | 	unsigned int sb_size = 0; | 
 |  | 
 | 	switch (drbg->core->flags & DRBG_TYPE_MASK) { | 
 | #ifdef CONFIG_CRYPTO_DRBG_HMAC | 
 | 	case DRBG_HMAC: | 
 | 		drbg->d_ops = &drbg_hmac_ops; | 
 | 		break; | 
 | #endif /* CONFIG_CRYPTO_DRBG_HMAC */ | 
 | #ifdef CONFIG_CRYPTO_DRBG_HASH | 
 | 	case DRBG_HASH: | 
 | 		drbg->d_ops = &drbg_hash_ops; | 
 | 		break; | 
 | #endif /* CONFIG_CRYPTO_DRBG_HASH */ | 
 | #ifdef CONFIG_CRYPTO_DRBG_CTR | 
 | 	case DRBG_CTR: | 
 | 		drbg->d_ops = &drbg_ctr_ops; | 
 | 		break; | 
 | #endif /* CONFIG_CRYPTO_DRBG_CTR */ | 
 | 	default: | 
 | 		ret = -EOPNOTSUPP; | 
 | 		goto err; | 
 | 	} | 
 |  | 
 | 	ret = drbg->d_ops->crypto_init(drbg); | 
 | 	if (ret < 0) | 
 | 		goto err; | 
 |  | 
 | 	drbg->Vbuf = kmalloc(drbg_statelen(drbg) + ret, GFP_KERNEL); | 
 | 	if (!drbg->Vbuf) { | 
 | 		ret = -ENOMEM; | 
 | 		goto fini; | 
 | 	} | 
 | 	drbg->V = PTR_ALIGN(drbg->Vbuf, ret + 1); | 
 | 	drbg->Cbuf = kmalloc(drbg_statelen(drbg) + ret, GFP_KERNEL); | 
 | 	if (!drbg->Cbuf) { | 
 | 		ret = -ENOMEM; | 
 | 		goto fini; | 
 | 	} | 
 | 	drbg->C = PTR_ALIGN(drbg->Cbuf, ret + 1); | 
 | 	/* scratchpad is only generated for CTR and Hash */ | 
 | 	if (drbg->core->flags & DRBG_HMAC) | 
 | 		sb_size = 0; | 
 | 	else if (drbg->core->flags & DRBG_CTR) | 
 | 		sb_size = drbg_statelen(drbg) + drbg_blocklen(drbg) + /* temp */ | 
 | 			  drbg_statelen(drbg) +	/* df_data */ | 
 | 			  drbg_blocklen(drbg) +	/* pad */ | 
 | 			  drbg_blocklen(drbg) +	/* iv */ | 
 | 			  drbg_statelen(drbg) + drbg_blocklen(drbg); /* temp */ | 
 | 	else | 
 | 		sb_size = drbg_statelen(drbg) + drbg_blocklen(drbg); | 
 |  | 
 | 	if (0 < sb_size) { | 
 | 		drbg->scratchpadbuf = kzalloc(sb_size + ret, GFP_KERNEL); | 
 | 		if (!drbg->scratchpadbuf) { | 
 | 			ret = -ENOMEM; | 
 | 			goto fini; | 
 | 		} | 
 | 		drbg->scratchpad = PTR_ALIGN(drbg->scratchpadbuf, ret + 1); | 
 | 	} | 
 |  | 
 | 	if (IS_ENABLED(CONFIG_CRYPTO_FIPS)) { | 
 | 		drbg->prev = kzalloc(drbg_sec_strength(drbg->core->flags), | 
 | 				     GFP_KERNEL); | 
 | 		if (!drbg->prev) { | 
 | 			ret = -ENOMEM; | 
 | 			goto fini; | 
 | 		} | 
 | 		drbg->fips_primed = false; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 |  | 
 | fini: | 
 | 	drbg->d_ops->crypto_fini(drbg); | 
 | err: | 
 | 	drbg_dealloc_state(drbg); | 
 | 	return ret; | 
 | } | 
 |  | 
 | /************************************************************************* | 
 |  * DRBG interface functions | 
 |  *************************************************************************/ | 
 |  | 
 | /* | 
 |  * DRBG generate function as required by SP800-90A - this function | 
 |  * generates random numbers | 
 |  * | 
 |  * @drbg DRBG state handle | 
 |  * @buf Buffer where to store the random numbers -- the buffer must already | 
 |  *      be pre-allocated by caller | 
 |  * @buflen Length of output buffer - this value defines the number of random | 
 |  *	   bytes pulled from DRBG | 
 |  * @addtl Additional input that is mixed into state, may be NULL -- note | 
 |  *	  the entropy is pulled by the DRBG internally unconditionally | 
 |  *	  as defined in SP800-90A. The additional input is mixed into | 
 |  *	  the state in addition to the pulled entropy. | 
 |  * | 
 |  * return: 0 when all bytes are generated; < 0 in case of an error | 
 |  */ | 
 | static int drbg_generate(struct drbg_state *drbg, | 
 | 			 unsigned char *buf, unsigned int buflen, | 
 | 			 struct drbg_string *addtl) | 
 | { | 
 | 	int len = 0; | 
 | 	LIST_HEAD(addtllist); | 
 |  | 
 | 	if (!drbg->core) { | 
 | 		pr_devel("DRBG: not yet seeded\n"); | 
 | 		return -EINVAL; | 
 | 	} | 
 | 	if (0 == buflen || !buf) { | 
 | 		pr_devel("DRBG: no output buffer provided\n"); | 
 | 		return -EINVAL; | 
 | 	} | 
 | 	if (addtl && NULL == addtl->buf && 0 < addtl->len) { | 
 | 		pr_devel("DRBG: wrong format of additional information\n"); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	/* 9.3.1 step 2 */ | 
 | 	len = -EINVAL; | 
 | 	if (buflen > (drbg_max_request_bytes(drbg))) { | 
 | 		pr_devel("DRBG: requested random numbers too large %u\n", | 
 | 			 buflen); | 
 | 		goto err; | 
 | 	} | 
 |  | 
 | 	/* 9.3.1 step 3 is implicit with the chosen DRBG */ | 
 |  | 
 | 	/* 9.3.1 step 4 */ | 
 | 	if (addtl && addtl->len > (drbg_max_addtl(drbg))) { | 
 | 		pr_devel("DRBG: additional information string too long %zu\n", | 
 | 			 addtl->len); | 
 | 		goto err; | 
 | 	} | 
 | 	/* 9.3.1 step 5 is implicit with the chosen DRBG */ | 
 |  | 
 | 	/* | 
 | 	 * 9.3.1 step 6 and 9 supplemented by 9.3.2 step c is implemented | 
 | 	 * here. The spec is a bit convoluted here, we make it simpler. | 
 | 	 */ | 
 | 	if (drbg->reseed_threshold < drbg->reseed_ctr) | 
 | 		drbg->seeded = DRBG_SEED_STATE_UNSEEDED; | 
 |  | 
 | 	if (drbg->pr || drbg->seeded == DRBG_SEED_STATE_UNSEEDED) { | 
 | 		pr_devel("DRBG: reseeding before generation (prediction " | 
 | 			 "resistance: %s, state %s)\n", | 
 | 			 drbg->pr ? "true" : "false", | 
 | 			 (drbg->seeded ==  DRBG_SEED_STATE_FULL ? | 
 | 			  "seeded" : "unseeded")); | 
 | 		/* 9.3.1 steps 7.1 through 7.3 */ | 
 | 		len = drbg_seed(drbg, addtl, true); | 
 | 		if (len) | 
 | 			goto err; | 
 | 		/* 9.3.1 step 7.4 */ | 
 | 		addtl = NULL; | 
 | 	} else if (rng_is_initialized() && | 
 | 		   drbg->seeded == DRBG_SEED_STATE_PARTIAL) { | 
 | 		len = drbg_seed_from_random(drbg); | 
 | 		if (len) | 
 | 			goto err; | 
 | 	} | 
 |  | 
 | 	if (addtl && 0 < addtl->len) | 
 | 		list_add_tail(&addtl->list, &addtllist); | 
 | 	/* 9.3.1 step 8 and 10 */ | 
 | 	len = drbg->d_ops->generate(drbg, buf, buflen, &addtllist); | 
 |  | 
 | 	/* 10.1.1.4 step 6, 10.1.2.5 step 7, 10.2.1.5.2 step 7 */ | 
 | 	drbg->reseed_ctr++; | 
 | 	if (0 >= len) | 
 | 		goto err; | 
 |  | 
 | 	/* | 
 | 	 * Section 11.3.3 requires to re-perform self tests after some | 
 | 	 * generated random numbers. The chosen value after which self | 
 | 	 * test is performed is arbitrary, but it should be reasonable. | 
 | 	 * However, we do not perform the self tests because of the following | 
 | 	 * reasons: it is mathematically impossible that the initial self tests | 
 | 	 * were successfully and the following are not. If the initial would | 
 | 	 * pass and the following would not, the kernel integrity is violated. | 
 | 	 * In this case, the entire kernel operation is questionable and it | 
 | 	 * is unlikely that the integrity violation only affects the | 
 | 	 * correct operation of the DRBG. | 
 | 	 * | 
 | 	 * Albeit the following code is commented out, it is provided in | 
 | 	 * case somebody has a need to implement the test of 11.3.3. | 
 | 	 */ | 
 | #if 0 | 
 | 	if (drbg->reseed_ctr && !(drbg->reseed_ctr % 4096)) { | 
 | 		int err = 0; | 
 | 		pr_devel("DRBG: start to perform self test\n"); | 
 | 		if (drbg->core->flags & DRBG_HMAC) | 
 | 			err = alg_test("drbg_pr_hmac_sha256", | 
 | 				       "drbg_pr_hmac_sha256", 0, 0); | 
 | 		else if (drbg->core->flags & DRBG_CTR) | 
 | 			err = alg_test("drbg_pr_ctr_aes128", | 
 | 				       "drbg_pr_ctr_aes128", 0, 0); | 
 | 		else | 
 | 			err = alg_test("drbg_pr_sha256", | 
 | 				       "drbg_pr_sha256", 0, 0); | 
 | 		if (err) { | 
 | 			pr_err("DRBG: periodical self test failed\n"); | 
 | 			/* | 
 | 			 * uninstantiate implies that from now on, only errors | 
 | 			 * are returned when reusing this DRBG cipher handle | 
 | 			 */ | 
 | 			drbg_uninstantiate(drbg); | 
 | 			return 0; | 
 | 		} else { | 
 | 			pr_devel("DRBG: self test successful\n"); | 
 | 		} | 
 | 	} | 
 | #endif | 
 |  | 
 | 	/* | 
 | 	 * All operations were successful, return 0 as mandated by | 
 | 	 * the kernel crypto API interface. | 
 | 	 */ | 
 | 	len = 0; | 
 | err: | 
 | 	return len; | 
 | } | 
 |  | 
 | /* | 
 |  * Wrapper around drbg_generate which can pull arbitrary long strings | 
 |  * from the DRBG without hitting the maximum request limitation. | 
 |  * | 
 |  * Parameters: see drbg_generate | 
 |  * Return codes: see drbg_generate -- if one drbg_generate request fails, | 
 |  *		 the entire drbg_generate_long request fails | 
 |  */ | 
 | static int drbg_generate_long(struct drbg_state *drbg, | 
 | 			      unsigned char *buf, unsigned int buflen, | 
 | 			      struct drbg_string *addtl) | 
 | { | 
 | 	unsigned int len = 0; | 
 | 	unsigned int slice = 0; | 
 | 	do { | 
 | 		int err = 0; | 
 | 		unsigned int chunk = 0; | 
 | 		slice = ((buflen - len) / drbg_max_request_bytes(drbg)); | 
 | 		chunk = slice ? drbg_max_request_bytes(drbg) : (buflen - len); | 
 | 		mutex_lock(&drbg->drbg_mutex); | 
 | 		err = drbg_generate(drbg, buf + len, chunk, addtl); | 
 | 		mutex_unlock(&drbg->drbg_mutex); | 
 | 		if (0 > err) | 
 | 			return err; | 
 | 		len += chunk; | 
 | 	} while (slice > 0 && (len < buflen)); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int drbg_prepare_hrng(struct drbg_state *drbg) | 
 | { | 
 | 	/* We do not need an HRNG in test mode. */ | 
 | 	if (list_empty(&drbg->test_data.list)) | 
 | 		return 0; | 
 |  | 
 | 	drbg->jent = crypto_alloc_rng("jitterentropy_rng", 0, 0); | 
 | 	if (IS_ERR(drbg->jent)) { | 
 | 		const int err = PTR_ERR(drbg->jent); | 
 |  | 
 | 		drbg->jent = NULL; | 
 | 		if (fips_enabled) | 
 | 			return err; | 
 | 		pr_info("DRBG: Continuing without Jitter RNG\n"); | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * DRBG instantiation function as required by SP800-90A - this function | 
 |  * sets up the DRBG handle, performs the initial seeding and all sanity | 
 |  * checks required by SP800-90A | 
 |  * | 
 |  * @drbg memory of state -- if NULL, new memory is allocated | 
 |  * @pers Personalization string that is mixed into state, may be NULL -- note | 
 |  *	 the entropy is pulled by the DRBG internally unconditionally | 
 |  *	 as defined in SP800-90A. The additional input is mixed into | 
 |  *	 the state in addition to the pulled entropy. | 
 |  * @coreref reference to core | 
 |  * @pr prediction resistance enabled | 
 |  * | 
 |  * return | 
 |  *	0 on success | 
 |  *	error value otherwise | 
 |  */ | 
 | static int drbg_instantiate(struct drbg_state *drbg, struct drbg_string *pers, | 
 | 			    int coreref, bool pr) | 
 | { | 
 | 	int ret; | 
 | 	bool reseed = true; | 
 |  | 
 | 	pr_devel("DRBG: Initializing DRBG core %d with prediction resistance " | 
 | 		 "%s\n", coreref, pr ? "enabled" : "disabled"); | 
 | 	mutex_lock(&drbg->drbg_mutex); | 
 |  | 
 | 	/* 9.1 step 1 is implicit with the selected DRBG type */ | 
 |  | 
 | 	/* | 
 | 	 * 9.1 step 2 is implicit as caller can select prediction resistance | 
 | 	 * and the flag is copied into drbg->flags -- | 
 | 	 * all DRBG types support prediction resistance | 
 | 	 */ | 
 |  | 
 | 	/* 9.1 step 4 is implicit in  drbg_sec_strength */ | 
 |  | 
 | 	if (!drbg->core) { | 
 | 		drbg->core = &drbg_cores[coreref]; | 
 | 		drbg->pr = pr; | 
 | 		drbg->seeded = DRBG_SEED_STATE_UNSEEDED; | 
 | 		drbg->reseed_threshold = drbg_max_requests(drbg); | 
 |  | 
 | 		ret = drbg_alloc_state(drbg); | 
 | 		if (ret) | 
 | 			goto unlock; | 
 |  | 
 | 		ret = drbg_prepare_hrng(drbg); | 
 | 		if (ret) | 
 | 			goto free_everything; | 
 |  | 
 | 		reseed = false; | 
 | 	} | 
 |  | 
 | 	ret = drbg_seed(drbg, pers, reseed); | 
 |  | 
 | 	if (ret && !reseed) | 
 | 		goto free_everything; | 
 |  | 
 | 	mutex_unlock(&drbg->drbg_mutex); | 
 | 	return ret; | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&drbg->drbg_mutex); | 
 | 	return ret; | 
 |  | 
 | free_everything: | 
 | 	mutex_unlock(&drbg->drbg_mutex); | 
 | 	drbg_uninstantiate(drbg); | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* | 
 |  * DRBG uninstantiate function as required by SP800-90A - this function | 
 |  * frees all buffers and the DRBG handle | 
 |  * | 
 |  * @drbg DRBG state handle | 
 |  * | 
 |  * return | 
 |  *	0 on success | 
 |  */ | 
 | static int drbg_uninstantiate(struct drbg_state *drbg) | 
 | { | 
 | 	if (!IS_ERR_OR_NULL(drbg->jent)) | 
 | 		crypto_free_rng(drbg->jent); | 
 | 	drbg->jent = NULL; | 
 |  | 
 | 	if (drbg->d_ops) | 
 | 		drbg->d_ops->crypto_fini(drbg); | 
 | 	drbg_dealloc_state(drbg); | 
 | 	/* no scrubbing of test_data -- this shall survive an uninstantiate */ | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * Helper function for setting the test data in the DRBG | 
 |  * | 
 |  * @drbg DRBG state handle | 
 |  * @data test data | 
 |  * @len test data length | 
 |  */ | 
 | static void drbg_kcapi_set_entropy(struct crypto_rng *tfm, | 
 | 				   const u8 *data, unsigned int len) | 
 | { | 
 | 	struct drbg_state *drbg = crypto_rng_ctx(tfm); | 
 |  | 
 | 	mutex_lock(&drbg->drbg_mutex); | 
 | 	drbg_string_fill(&drbg->test_data, data, len); | 
 | 	mutex_unlock(&drbg->drbg_mutex); | 
 | } | 
 |  | 
 | /*************************************************************** | 
 |  * Kernel crypto API cipher invocations requested by DRBG | 
 |  ***************************************************************/ | 
 |  | 
 | #if defined(CONFIG_CRYPTO_DRBG_HASH) || defined(CONFIG_CRYPTO_DRBG_HMAC) | 
 | struct sdesc { | 
 | 	struct shash_desc shash; | 
 | 	char ctx[]; | 
 | }; | 
 |  | 
 | static int drbg_init_hash_kernel(struct drbg_state *drbg) | 
 | { | 
 | 	struct sdesc *sdesc; | 
 | 	struct crypto_shash *tfm; | 
 |  | 
 | 	tfm = crypto_alloc_shash(drbg->core->backend_cra_name, 0, 0); | 
 | 	if (IS_ERR(tfm)) { | 
 | 		pr_info("DRBG: could not allocate digest TFM handle: %s\n", | 
 | 				drbg->core->backend_cra_name); | 
 | 		return PTR_ERR(tfm); | 
 | 	} | 
 | 	BUG_ON(drbg_blocklen(drbg) != crypto_shash_digestsize(tfm)); | 
 | 	sdesc = kzalloc(sizeof(struct shash_desc) + crypto_shash_descsize(tfm), | 
 | 			GFP_KERNEL); | 
 | 	if (!sdesc) { | 
 | 		crypto_free_shash(tfm); | 
 | 		return -ENOMEM; | 
 | 	} | 
 |  | 
 | 	sdesc->shash.tfm = tfm; | 
 | 	drbg->priv_data = sdesc; | 
 |  | 
 | 	return crypto_shash_alignmask(tfm); | 
 | } | 
 |  | 
 | static int drbg_fini_hash_kernel(struct drbg_state *drbg) | 
 | { | 
 | 	struct sdesc *sdesc = (struct sdesc *)drbg->priv_data; | 
 | 	if (sdesc) { | 
 | 		crypto_free_shash(sdesc->shash.tfm); | 
 | 		kzfree(sdesc); | 
 | 	} | 
 | 	drbg->priv_data = NULL; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void drbg_kcapi_hmacsetkey(struct drbg_state *drbg, | 
 | 				  const unsigned char *key) | 
 | { | 
 | 	struct sdesc *sdesc = (struct sdesc *)drbg->priv_data; | 
 |  | 
 | 	crypto_shash_setkey(sdesc->shash.tfm, key, drbg_statelen(drbg)); | 
 | } | 
 |  | 
 | static int drbg_kcapi_hash(struct drbg_state *drbg, unsigned char *outval, | 
 | 			   const struct list_head *in) | 
 | { | 
 | 	struct sdesc *sdesc = (struct sdesc *)drbg->priv_data; | 
 | 	struct drbg_string *input = NULL; | 
 |  | 
 | 	crypto_shash_init(&sdesc->shash); | 
 | 	list_for_each_entry(input, in, list) | 
 | 		crypto_shash_update(&sdesc->shash, input->buf, input->len); | 
 | 	return crypto_shash_final(&sdesc->shash, outval); | 
 | } | 
 | #endif /* (CONFIG_CRYPTO_DRBG_HASH || CONFIG_CRYPTO_DRBG_HMAC) */ | 
 |  | 
 | #ifdef CONFIG_CRYPTO_DRBG_CTR | 
 | static int drbg_fini_sym_kernel(struct drbg_state *drbg) | 
 | { | 
 | 	struct crypto_cipher *tfm = | 
 | 		(struct crypto_cipher *)drbg->priv_data; | 
 | 	if (tfm) | 
 | 		crypto_free_cipher(tfm); | 
 | 	drbg->priv_data = NULL; | 
 |  | 
 | 	if (drbg->ctr_handle) | 
 | 		crypto_free_skcipher(drbg->ctr_handle); | 
 | 	drbg->ctr_handle = NULL; | 
 |  | 
 | 	if (drbg->ctr_req) | 
 | 		skcipher_request_free(drbg->ctr_req); | 
 | 	drbg->ctr_req = NULL; | 
 |  | 
 | 	kfree(drbg->outscratchpadbuf); | 
 | 	drbg->outscratchpadbuf = NULL; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int drbg_init_sym_kernel(struct drbg_state *drbg) | 
 | { | 
 | 	struct crypto_cipher *tfm; | 
 | 	struct crypto_skcipher *sk_tfm; | 
 | 	struct skcipher_request *req; | 
 | 	unsigned int alignmask; | 
 | 	char ctr_name[CRYPTO_MAX_ALG_NAME]; | 
 |  | 
 | 	tfm = crypto_alloc_cipher(drbg->core->backend_cra_name, 0, 0); | 
 | 	if (IS_ERR(tfm)) { | 
 | 		pr_info("DRBG: could not allocate cipher TFM handle: %s\n", | 
 | 				drbg->core->backend_cra_name); | 
 | 		return PTR_ERR(tfm); | 
 | 	} | 
 | 	BUG_ON(drbg_blocklen(drbg) != crypto_cipher_blocksize(tfm)); | 
 | 	drbg->priv_data = tfm; | 
 |  | 
 | 	if (snprintf(ctr_name, CRYPTO_MAX_ALG_NAME, "ctr(%s)", | 
 | 	    drbg->core->backend_cra_name) >= CRYPTO_MAX_ALG_NAME) { | 
 | 		drbg_fini_sym_kernel(drbg); | 
 | 		return -EINVAL; | 
 | 	} | 
 | 	sk_tfm = crypto_alloc_skcipher(ctr_name, 0, 0); | 
 | 	if (IS_ERR(sk_tfm)) { | 
 | 		pr_info("DRBG: could not allocate CTR cipher TFM handle: %s\n", | 
 | 				ctr_name); | 
 | 		drbg_fini_sym_kernel(drbg); | 
 | 		return PTR_ERR(sk_tfm); | 
 | 	} | 
 | 	drbg->ctr_handle = sk_tfm; | 
 | 	crypto_init_wait(&drbg->ctr_wait); | 
 |  | 
 | 	req = skcipher_request_alloc(sk_tfm, GFP_KERNEL); | 
 | 	if (!req) { | 
 | 		pr_info("DRBG: could not allocate request queue\n"); | 
 | 		drbg_fini_sym_kernel(drbg); | 
 | 		return -ENOMEM; | 
 | 	} | 
 | 	drbg->ctr_req = req; | 
 | 	skcipher_request_set_callback(req, CRYPTO_TFM_REQ_MAY_BACKLOG | | 
 | 						CRYPTO_TFM_REQ_MAY_SLEEP, | 
 | 					crypto_req_done, &drbg->ctr_wait); | 
 |  | 
 | 	alignmask = crypto_skcipher_alignmask(sk_tfm); | 
 | 	drbg->outscratchpadbuf = kmalloc(DRBG_OUTSCRATCHLEN + alignmask, | 
 | 					 GFP_KERNEL); | 
 | 	if (!drbg->outscratchpadbuf) { | 
 | 		drbg_fini_sym_kernel(drbg); | 
 | 		return -ENOMEM; | 
 | 	} | 
 | 	drbg->outscratchpad = (u8 *)PTR_ALIGN(drbg->outscratchpadbuf, | 
 | 					      alignmask + 1); | 
 |  | 
 | 	sg_init_table(&drbg->sg_in, 1); | 
 | 	sg_init_one(&drbg->sg_out, drbg->outscratchpad, DRBG_OUTSCRATCHLEN); | 
 |  | 
 | 	return alignmask; | 
 | } | 
 |  | 
 | static void drbg_kcapi_symsetkey(struct drbg_state *drbg, | 
 | 				 const unsigned char *key) | 
 | { | 
 | 	struct crypto_cipher *tfm = | 
 | 		(struct crypto_cipher *)drbg->priv_data; | 
 |  | 
 | 	crypto_cipher_setkey(tfm, key, (drbg_keylen(drbg))); | 
 | } | 
 |  | 
 | static int drbg_kcapi_sym(struct drbg_state *drbg, unsigned char *outval, | 
 | 			  const struct drbg_string *in) | 
 | { | 
 | 	struct crypto_cipher *tfm = | 
 | 		(struct crypto_cipher *)drbg->priv_data; | 
 |  | 
 | 	/* there is only component in *in */ | 
 | 	BUG_ON(in->len < drbg_blocklen(drbg)); | 
 | 	crypto_cipher_encrypt_one(tfm, outval, in->buf); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int drbg_kcapi_sym_ctr(struct drbg_state *drbg, | 
 | 			      u8 *inbuf, u32 inlen, | 
 | 			      u8 *outbuf, u32 outlen) | 
 | { | 
 | 	struct scatterlist *sg_in = &drbg->sg_in, *sg_out = &drbg->sg_out; | 
 | 	u32 scratchpad_use = min_t(u32, outlen, DRBG_OUTSCRATCHLEN); | 
 | 	int ret; | 
 |  | 
 | 	if (inbuf) { | 
 | 		/* Use caller-provided input buffer */ | 
 | 		sg_set_buf(sg_in, inbuf, inlen); | 
 | 	} else { | 
 | 		/* Use scratchpad for in-place operation */ | 
 | 		inlen = scratchpad_use; | 
 | 		memset(drbg->outscratchpad, 0, scratchpad_use); | 
 | 		sg_set_buf(sg_in, drbg->outscratchpad, scratchpad_use); | 
 | 	} | 
 |  | 
 | 	while (outlen) { | 
 | 		u32 cryptlen = min3(inlen, outlen, (u32)DRBG_OUTSCRATCHLEN); | 
 |  | 
 | 		/* Output buffer may not be valid for SGL, use scratchpad */ | 
 | 		skcipher_request_set_crypt(drbg->ctr_req, sg_in, sg_out, | 
 | 					   cryptlen, drbg->V); | 
 | 		ret = crypto_wait_req(crypto_skcipher_encrypt(drbg->ctr_req), | 
 | 					&drbg->ctr_wait); | 
 | 		if (ret) | 
 | 			goto out; | 
 |  | 
 | 		crypto_init_wait(&drbg->ctr_wait); | 
 |  | 
 | 		memcpy(outbuf, drbg->outscratchpad, cryptlen); | 
 | 		memzero_explicit(drbg->outscratchpad, cryptlen); | 
 |  | 
 | 		outlen -= cryptlen; | 
 | 		outbuf += cryptlen; | 
 | 	} | 
 | 	ret = 0; | 
 |  | 
 | out: | 
 | 	return ret; | 
 | } | 
 | #endif /* CONFIG_CRYPTO_DRBG_CTR */ | 
 |  | 
 | /*************************************************************** | 
 |  * Kernel crypto API interface to register DRBG | 
 |  ***************************************************************/ | 
 |  | 
 | /* | 
 |  * Look up the DRBG flags by given kernel crypto API cra_name | 
 |  * The code uses the drbg_cores definition to do this | 
 |  * | 
 |  * @cra_name kernel crypto API cra_name | 
 |  * @coreref reference to integer which is filled with the pointer to | 
 |  *  the applicable core | 
 |  * @pr reference for setting prediction resistance | 
 |  * | 
 |  * return: flags | 
 |  */ | 
 | static inline void drbg_convert_tfm_core(const char *cra_driver_name, | 
 | 					 int *coreref, bool *pr) | 
 | { | 
 | 	int i = 0; | 
 | 	size_t start = 0; | 
 | 	int len = 0; | 
 |  | 
 | 	*pr = true; | 
 | 	/* disassemble the names */ | 
 | 	if (!memcmp(cra_driver_name, "drbg_nopr_", 10)) { | 
 | 		start = 10; | 
 | 		*pr = false; | 
 | 	} else if (!memcmp(cra_driver_name, "drbg_pr_", 8)) { | 
 | 		start = 8; | 
 | 	} else { | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	/* remove the first part */ | 
 | 	len = strlen(cra_driver_name) - start; | 
 | 	for (i = 0; ARRAY_SIZE(drbg_cores) > i; i++) { | 
 | 		if (!memcmp(cra_driver_name + start, drbg_cores[i].cra_name, | 
 | 			    len)) { | 
 | 			*coreref = i; | 
 | 			return; | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 | static int drbg_kcapi_init(struct crypto_tfm *tfm) | 
 | { | 
 | 	struct drbg_state *drbg = crypto_tfm_ctx(tfm); | 
 |  | 
 | 	mutex_init(&drbg->drbg_mutex); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void drbg_kcapi_cleanup(struct crypto_tfm *tfm) | 
 | { | 
 | 	drbg_uninstantiate(crypto_tfm_ctx(tfm)); | 
 | } | 
 |  | 
 | /* | 
 |  * Generate random numbers invoked by the kernel crypto API: | 
 |  * The API of the kernel crypto API is extended as follows: | 
 |  * | 
 |  * src is additional input supplied to the RNG. | 
 |  * slen is the length of src. | 
 |  * dst is the output buffer where random data is to be stored. | 
 |  * dlen is the length of dst. | 
 |  */ | 
 | static int drbg_kcapi_random(struct crypto_rng *tfm, | 
 | 			     const u8 *src, unsigned int slen, | 
 | 			     u8 *dst, unsigned int dlen) | 
 | { | 
 | 	struct drbg_state *drbg = crypto_rng_ctx(tfm); | 
 | 	struct drbg_string *addtl = NULL; | 
 | 	struct drbg_string string; | 
 |  | 
 | 	if (slen) { | 
 | 		/* linked list variable is now local to allow modification */ | 
 | 		drbg_string_fill(&string, src, slen); | 
 | 		addtl = &string; | 
 | 	} | 
 |  | 
 | 	return drbg_generate_long(drbg, dst, dlen, addtl); | 
 | } | 
 |  | 
 | /* | 
 |  * Seed the DRBG invoked by the kernel crypto API | 
 |  */ | 
 | static int drbg_kcapi_seed(struct crypto_rng *tfm, | 
 | 			   const u8 *seed, unsigned int slen) | 
 | { | 
 | 	struct drbg_state *drbg = crypto_rng_ctx(tfm); | 
 | 	struct crypto_tfm *tfm_base = crypto_rng_tfm(tfm); | 
 | 	bool pr = false; | 
 | 	struct drbg_string string; | 
 | 	struct drbg_string *seed_string = NULL; | 
 | 	int coreref = 0; | 
 |  | 
 | 	drbg_convert_tfm_core(crypto_tfm_alg_driver_name(tfm_base), &coreref, | 
 | 			      &pr); | 
 | 	if (0 < slen) { | 
 | 		drbg_string_fill(&string, seed, slen); | 
 | 		seed_string = &string; | 
 | 	} | 
 |  | 
 | 	return drbg_instantiate(drbg, seed_string, coreref, pr); | 
 | } | 
 |  | 
 | /*************************************************************** | 
 |  * Kernel module: code to load the module | 
 |  ***************************************************************/ | 
 |  | 
 | /* | 
 |  * Tests as defined in 11.3.2 in addition to the cipher tests: testing | 
 |  * of the error handling. | 
 |  * | 
 |  * Note: testing of failing seed source as defined in 11.3.2 is not applicable | 
 |  * as seed source of get_random_bytes does not fail. | 
 |  * | 
 |  * Note 2: There is no sensible way of testing the reseed counter | 
 |  * enforcement, so skip it. | 
 |  */ | 
 | static inline int __init drbg_healthcheck_sanity(void) | 
 | { | 
 | 	int len = 0; | 
 | #define OUTBUFLEN 16 | 
 | 	unsigned char buf[OUTBUFLEN]; | 
 | 	struct drbg_state *drbg = NULL; | 
 | 	int ret = -EFAULT; | 
 | 	int rc = -EFAULT; | 
 | 	bool pr = false; | 
 | 	int coreref = 0; | 
 | 	struct drbg_string addtl; | 
 | 	size_t max_addtllen, max_request_bytes; | 
 |  | 
 | 	/* only perform test in FIPS mode */ | 
 | 	if (!fips_enabled) | 
 | 		return 0; | 
 |  | 
 | #ifdef CONFIG_CRYPTO_DRBG_CTR | 
 | 	drbg_convert_tfm_core("drbg_nopr_ctr_aes128", &coreref, &pr); | 
 | #elif defined CONFIG_CRYPTO_DRBG_HASH | 
 | 	drbg_convert_tfm_core("drbg_nopr_sha256", &coreref, &pr); | 
 | #else | 
 | 	drbg_convert_tfm_core("drbg_nopr_hmac_sha256", &coreref, &pr); | 
 | #endif | 
 |  | 
 | 	drbg = kzalloc(sizeof(struct drbg_state), GFP_KERNEL); | 
 | 	if (!drbg) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	mutex_init(&drbg->drbg_mutex); | 
 | 	drbg->core = &drbg_cores[coreref]; | 
 | 	drbg->reseed_threshold = drbg_max_requests(drbg); | 
 |  | 
 | 	/* | 
 | 	 * if the following tests fail, it is likely that there is a buffer | 
 | 	 * overflow as buf is much smaller than the requested or provided | 
 | 	 * string lengths -- in case the error handling does not succeed | 
 | 	 * we may get an OOPS. And we want to get an OOPS as this is a | 
 | 	 * grave bug. | 
 | 	 */ | 
 |  | 
 | 	max_addtllen = drbg_max_addtl(drbg); | 
 | 	max_request_bytes = drbg_max_request_bytes(drbg); | 
 | 	drbg_string_fill(&addtl, buf, max_addtllen + 1); | 
 | 	/* overflow addtllen with additonal info string */ | 
 | 	len = drbg_generate(drbg, buf, OUTBUFLEN, &addtl); | 
 | 	BUG_ON(0 < len); | 
 | 	/* overflow max_bits */ | 
 | 	len = drbg_generate(drbg, buf, (max_request_bytes + 1), NULL); | 
 | 	BUG_ON(0 < len); | 
 |  | 
 | 	/* overflow max addtllen with personalization string */ | 
 | 	ret = drbg_seed(drbg, &addtl, false); | 
 | 	BUG_ON(0 == ret); | 
 | 	/* all tests passed */ | 
 | 	rc = 0; | 
 |  | 
 | 	pr_devel("DRBG: Sanity tests for failure code paths successfully " | 
 | 		 "completed\n"); | 
 |  | 
 | 	kfree(drbg); | 
 | 	return rc; | 
 | } | 
 |  | 
 | static struct rng_alg drbg_algs[22]; | 
 |  | 
 | /* | 
 |  * Fill the array drbg_algs used to register the different DRBGs | 
 |  * with the kernel crypto API. To fill the array, the information | 
 |  * from drbg_cores[] is used. | 
 |  */ | 
 | static inline void __init drbg_fill_array(struct rng_alg *alg, | 
 | 					  const struct drbg_core *core, int pr) | 
 | { | 
 | 	int pos = 0; | 
 | 	static int priority = 200; | 
 |  | 
 | 	memcpy(alg->base.cra_name, "stdrng", 6); | 
 | 	if (pr) { | 
 | 		memcpy(alg->base.cra_driver_name, "drbg_pr_", 8); | 
 | 		pos = 8; | 
 | 	} else { | 
 | 		memcpy(alg->base.cra_driver_name, "drbg_nopr_", 10); | 
 | 		pos = 10; | 
 | 	} | 
 | 	memcpy(alg->base.cra_driver_name + pos, core->cra_name, | 
 | 	       strlen(core->cra_name)); | 
 |  | 
 | 	alg->base.cra_priority = priority; | 
 | 	priority++; | 
 | 	/* | 
 | 	 * If FIPS mode enabled, the selected DRBG shall have the | 
 | 	 * highest cra_priority over other stdrng instances to ensure | 
 | 	 * it is selected. | 
 | 	 */ | 
 | 	if (fips_enabled) | 
 | 		alg->base.cra_priority += 200; | 
 |  | 
 | 	alg->base.cra_ctxsize 	= sizeof(struct drbg_state); | 
 | 	alg->base.cra_module	= THIS_MODULE; | 
 | 	alg->base.cra_init	= drbg_kcapi_init; | 
 | 	alg->base.cra_exit	= drbg_kcapi_cleanup; | 
 | 	alg->generate		= drbg_kcapi_random; | 
 | 	alg->seed		= drbg_kcapi_seed; | 
 | 	alg->set_ent		= drbg_kcapi_set_entropy; | 
 | 	alg->seedsize		= 0; | 
 | } | 
 |  | 
 | static int __init drbg_init(void) | 
 | { | 
 | 	unsigned int i = 0; /* pointer to drbg_algs */ | 
 | 	unsigned int j = 0; /* pointer to drbg_cores */ | 
 | 	int ret; | 
 |  | 
 | 	ret = drbg_healthcheck_sanity(); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	if (ARRAY_SIZE(drbg_cores) * 2 > ARRAY_SIZE(drbg_algs)) { | 
 | 		pr_info("DRBG: Cannot register all DRBG types" | 
 | 			"(slots needed: %zu, slots available: %zu)\n", | 
 | 			ARRAY_SIZE(drbg_cores) * 2, ARRAY_SIZE(drbg_algs)); | 
 | 		return -EFAULT; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * each DRBG definition can be used with PR and without PR, thus | 
 | 	 * we instantiate each DRBG in drbg_cores[] twice. | 
 | 	 * | 
 | 	 * As the order of placing them into the drbg_algs array matters | 
 | 	 * (the later DRBGs receive a higher cra_priority) we register the | 
 | 	 * prediction resistance DRBGs first as the should not be too | 
 | 	 * interesting. | 
 | 	 */ | 
 | 	for (j = 0; ARRAY_SIZE(drbg_cores) > j; j++, i++) | 
 | 		drbg_fill_array(&drbg_algs[i], &drbg_cores[j], 1); | 
 | 	for (j = 0; ARRAY_SIZE(drbg_cores) > j; j++, i++) | 
 | 		drbg_fill_array(&drbg_algs[i], &drbg_cores[j], 0); | 
 | 	return crypto_register_rngs(drbg_algs, (ARRAY_SIZE(drbg_cores) * 2)); | 
 | } | 
 |  | 
 | static void __exit drbg_exit(void) | 
 | { | 
 | 	crypto_unregister_rngs(drbg_algs, (ARRAY_SIZE(drbg_cores) * 2)); | 
 | } | 
 |  | 
 | subsys_initcall(drbg_init); | 
 | module_exit(drbg_exit); | 
 | #ifndef CRYPTO_DRBG_HASH_STRING | 
 | #define CRYPTO_DRBG_HASH_STRING "" | 
 | #endif | 
 | #ifndef CRYPTO_DRBG_HMAC_STRING | 
 | #define CRYPTO_DRBG_HMAC_STRING "" | 
 | #endif | 
 | #ifndef CRYPTO_DRBG_CTR_STRING | 
 | #define CRYPTO_DRBG_CTR_STRING "" | 
 | #endif | 
 | MODULE_LICENSE("GPL"); | 
 | MODULE_AUTHOR("Stephan Mueller <smueller@chronox.de>"); | 
 | MODULE_DESCRIPTION("NIST SP800-90A Deterministic Random Bit Generator (DRBG) " | 
 | 		   "using following cores: " | 
 | 		   CRYPTO_DRBG_HASH_STRING | 
 | 		   CRYPTO_DRBG_HMAC_STRING | 
 | 		   CRYPTO_DRBG_CTR_STRING); | 
 | MODULE_ALIAS_CRYPTO("stdrng"); |