| // SPDX-License-Identifier: GPL-2.0+ | 
 | /****************************************************************************** | 
 |  *  cxacru.c  -  driver for USB ADSL modems based on | 
 |  *               Conexant AccessRunner chipset | 
 |  * | 
 |  *  Copyright (C) 2004 David Woodhouse, Duncan Sands, Roman Kagan | 
 |  *  Copyright (C) 2005 Duncan Sands, Roman Kagan (rkagan % mail ! ru) | 
 |  *  Copyright (C) 2007 Simon Arlott | 
 |  *  Copyright (C) 2009 Simon Arlott | 
 |  ******************************************************************************/ | 
 |  | 
 | /* | 
 |  *  Credit is due for Josep Comas, who created the original patch to speedtch.c | 
 |  *  to support the different padding used by the AccessRunner (now generalized | 
 |  *  into usbatm), and the userspace firmware loading utility. | 
 |  */ | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/moduleparam.h> | 
 | #include <linux/kernel.h> | 
 | #include <linux/timer.h> | 
 | #include <linux/errno.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/device.h> | 
 | #include <linux/firmware.h> | 
 | #include <linux/mutex.h> | 
 | #include <asm/unaligned.h> | 
 |  | 
 | #include "usbatm.h" | 
 |  | 
 | #define DRIVER_AUTHOR	"Roman Kagan, David Woodhouse, Duncan Sands, Simon Arlott" | 
 | #define DRIVER_DESC	"Conexant AccessRunner ADSL USB modem driver" | 
 |  | 
 | static const char cxacru_driver_name[] = "cxacru"; | 
 |  | 
 | #define CXACRU_EP_CMD		0x01	/* Bulk/interrupt in/out */ | 
 | #define CXACRU_EP_DATA		0x02	/* Bulk in/out */ | 
 |  | 
 | #define CMD_PACKET_SIZE		64	/* Should be maxpacket(ep)? */ | 
 | #define CMD_MAX_CONFIG		((CMD_PACKET_SIZE / 4 - 1) / 2) | 
 |  | 
 | /* Addresses */ | 
 | #define PLLFCLK_ADDR	0x00350068 | 
 | #define PLLBCLK_ADDR	0x0035006c | 
 | #define SDRAMEN_ADDR	0x00350010 | 
 | #define FW_ADDR		0x00801000 | 
 | #define BR_ADDR		0x00180600 | 
 | #define SIG_ADDR	0x00180500 | 
 | #define BR_STACK_ADDR	0x00187f10 | 
 |  | 
 | /* Values */ | 
 | #define SDRAM_ENA	0x1 | 
 |  | 
 | #define CMD_TIMEOUT	2000	/* msecs */ | 
 | #define POLL_INTERVAL	1	/* secs */ | 
 |  | 
 | /* commands for interaction with the modem through the control channel before | 
 |  * firmware is loaded  */ | 
 | enum cxacru_fw_request { | 
 | 	FW_CMD_ERR, | 
 | 	FW_GET_VER, | 
 | 	FW_READ_MEM, | 
 | 	FW_WRITE_MEM, | 
 | 	FW_RMW_MEM, | 
 | 	FW_CHECKSUM_MEM, | 
 | 	FW_GOTO_MEM, | 
 | }; | 
 |  | 
 | /* commands for interaction with the modem through the control channel once | 
 |  * firmware is loaded  */ | 
 | enum cxacru_cm_request { | 
 | 	CM_REQUEST_UNDEFINED = 0x80, | 
 | 	CM_REQUEST_TEST, | 
 | 	CM_REQUEST_CHIP_GET_MAC_ADDRESS, | 
 | 	CM_REQUEST_CHIP_GET_DP_VERSIONS, | 
 | 	CM_REQUEST_CHIP_ADSL_LINE_START, | 
 | 	CM_REQUEST_CHIP_ADSL_LINE_STOP, | 
 | 	CM_REQUEST_CHIP_ADSL_LINE_GET_STATUS, | 
 | 	CM_REQUEST_CHIP_ADSL_LINE_GET_SPEED, | 
 | 	CM_REQUEST_CARD_INFO_GET, | 
 | 	CM_REQUEST_CARD_DATA_GET, | 
 | 	CM_REQUEST_CARD_DATA_SET, | 
 | 	CM_REQUEST_COMMAND_HW_IO, | 
 | 	CM_REQUEST_INTERFACE_HW_IO, | 
 | 	CM_REQUEST_CARD_SERIAL_DATA_PATH_GET, | 
 | 	CM_REQUEST_CARD_SERIAL_DATA_PATH_SET, | 
 | 	CM_REQUEST_CARD_CONTROLLER_VERSION_GET, | 
 | 	CM_REQUEST_CARD_GET_STATUS, | 
 | 	CM_REQUEST_CARD_GET_MAC_ADDRESS, | 
 | 	CM_REQUEST_CARD_GET_DATA_LINK_STATUS, | 
 | 	CM_REQUEST_MAX, | 
 | }; | 
 |  | 
 | /* commands for interaction with the flash memory | 
 |  * | 
 |  * read:  response is the contents of the first 60 bytes of flash memory | 
 |  * write: request contains the 60 bytes of data to write to flash memory | 
 |  *        response is the contents of the first 60 bytes of flash memory | 
 |  * | 
 |  * layout: PP PP VV VV  MM MM MM MM  MM MM ?? ??  SS SS SS SS  SS SS SS SS | 
 |  *         SS SS SS SS  SS SS SS SS  00 00 00 00  00 00 00 00  00 00 00 00 | 
 |  *         00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00 | 
 |  * | 
 |  *   P: le16  USB Product ID | 
 |  *   V: le16  USB Vendor ID | 
 |  *   M: be48  MAC Address | 
 |  *   S: le16  ASCII Serial Number | 
 |  */ | 
 | enum cxacru_cm_flash { | 
 | 	CM_FLASH_READ = 0xa1, | 
 | 	CM_FLASH_WRITE = 0xa2 | 
 | }; | 
 |  | 
 | /* reply codes to the commands above */ | 
 | enum cxacru_cm_status { | 
 | 	CM_STATUS_UNDEFINED, | 
 | 	CM_STATUS_SUCCESS, | 
 | 	CM_STATUS_ERROR, | 
 | 	CM_STATUS_UNSUPPORTED, | 
 | 	CM_STATUS_UNIMPLEMENTED, | 
 | 	CM_STATUS_PARAMETER_ERROR, | 
 | 	CM_STATUS_DBG_LOOPBACK, | 
 | 	CM_STATUS_MAX, | 
 | }; | 
 |  | 
 | /* indices into CARD_INFO_GET return array */ | 
 | enum cxacru_info_idx { | 
 | 	CXINF_DOWNSTREAM_RATE, | 
 | 	CXINF_UPSTREAM_RATE, | 
 | 	CXINF_LINK_STATUS, | 
 | 	CXINF_LINE_STATUS, | 
 | 	CXINF_MAC_ADDRESS_HIGH, | 
 | 	CXINF_MAC_ADDRESS_LOW, | 
 | 	CXINF_UPSTREAM_SNR_MARGIN, | 
 | 	CXINF_DOWNSTREAM_SNR_MARGIN, | 
 | 	CXINF_UPSTREAM_ATTENUATION, | 
 | 	CXINF_DOWNSTREAM_ATTENUATION, | 
 | 	CXINF_TRANSMITTER_POWER, | 
 | 	CXINF_UPSTREAM_BITS_PER_FRAME, | 
 | 	CXINF_DOWNSTREAM_BITS_PER_FRAME, | 
 | 	CXINF_STARTUP_ATTEMPTS, | 
 | 	CXINF_UPSTREAM_CRC_ERRORS, | 
 | 	CXINF_DOWNSTREAM_CRC_ERRORS, | 
 | 	CXINF_UPSTREAM_FEC_ERRORS, | 
 | 	CXINF_DOWNSTREAM_FEC_ERRORS, | 
 | 	CXINF_UPSTREAM_HEC_ERRORS, | 
 | 	CXINF_DOWNSTREAM_HEC_ERRORS, | 
 | 	CXINF_LINE_STARTABLE, | 
 | 	CXINF_MODULATION, | 
 | 	CXINF_ADSL_HEADEND, | 
 | 	CXINF_ADSL_HEADEND_ENVIRONMENT, | 
 | 	CXINF_CONTROLLER_VERSION, | 
 | 	/* dunno what the missing two mean */ | 
 | 	CXINF_MAX = 0x1c, | 
 | }; | 
 |  | 
 | enum cxacru_poll_state { | 
 | 	CXPOLL_STOPPING, | 
 | 	CXPOLL_STOPPED, | 
 | 	CXPOLL_POLLING, | 
 | 	CXPOLL_SHUTDOWN | 
 | }; | 
 |  | 
 | struct cxacru_modem_type { | 
 | 	u32 pll_f_clk; | 
 | 	u32 pll_b_clk; | 
 | 	int boot_rom_patch; | 
 | }; | 
 |  | 
 | struct cxacru_data { | 
 | 	struct usbatm_data *usbatm; | 
 |  | 
 | 	const struct cxacru_modem_type *modem_type; | 
 |  | 
 | 	int line_status; | 
 | 	struct mutex adsl_state_serialize; | 
 | 	int adsl_status; | 
 | 	struct delayed_work poll_work; | 
 | 	u32 card_info[CXINF_MAX]; | 
 | 	struct mutex poll_state_serialize; | 
 | 	enum cxacru_poll_state poll_state; | 
 |  | 
 | 	/* contol handles */ | 
 | 	struct mutex cm_serialize; | 
 | 	u8 *rcv_buf; | 
 | 	u8 *snd_buf; | 
 | 	struct urb *rcv_urb; | 
 | 	struct urb *snd_urb; | 
 | 	struct completion rcv_done; | 
 | 	struct completion snd_done; | 
 | }; | 
 |  | 
 | static int cxacru_cm(struct cxacru_data *instance, enum cxacru_cm_request cm, | 
 | 	u8 *wdata, int wsize, u8 *rdata, int rsize); | 
 | static void cxacru_poll_status(struct work_struct *work); | 
 |  | 
 | /* Card info exported through sysfs */ | 
 | #define CXACRU__ATTR_INIT(_name) \ | 
 | static DEVICE_ATTR_RO(_name) | 
 |  | 
 | #define CXACRU_CMD_INIT(_name) \ | 
 | static DEVICE_ATTR_RW(_name) | 
 |  | 
 | #define CXACRU_SET_INIT(_name) \ | 
 | static DEVICE_ATTR_WO(_name) | 
 |  | 
 | #define CXACRU_ATTR_INIT(_value, _type, _name) \ | 
 | static ssize_t _name##_show(struct device *dev, \ | 
 | 	struct device_attribute *attr, char *buf) \ | 
 | { \ | 
 | 	struct cxacru_data *instance = to_usbatm_driver_data(\ | 
 | 		to_usb_interface(dev)); \ | 
 | \ | 
 | 	if (instance == NULL) \ | 
 | 		return -ENODEV; \ | 
 | \ | 
 | 	return cxacru_sysfs_showattr_##_type(instance->card_info[_value], buf); \ | 
 | } \ | 
 | CXACRU__ATTR_INIT(_name) | 
 |  | 
 | #define CXACRU_ATTR_CREATE(_v, _t, _name) CXACRU_DEVICE_CREATE_FILE(_name) | 
 | #define CXACRU_CMD_CREATE(_name)          CXACRU_DEVICE_CREATE_FILE(_name) | 
 | #define CXACRU_SET_CREATE(_name)          CXACRU_DEVICE_CREATE_FILE(_name) | 
 | #define CXACRU__ATTR_CREATE(_name)        CXACRU_DEVICE_CREATE_FILE(_name) | 
 |  | 
 | #define CXACRU_ATTR_REMOVE(_v, _t, _name) CXACRU_DEVICE_REMOVE_FILE(_name) | 
 | #define CXACRU_CMD_REMOVE(_name)          CXACRU_DEVICE_REMOVE_FILE(_name) | 
 | #define CXACRU_SET_REMOVE(_name)          CXACRU_DEVICE_REMOVE_FILE(_name) | 
 | #define CXACRU__ATTR_REMOVE(_name)        CXACRU_DEVICE_REMOVE_FILE(_name) | 
 |  | 
 | static ssize_t cxacru_sysfs_showattr_u32(u32 value, char *buf) | 
 | { | 
 | 	return snprintf(buf, PAGE_SIZE, "%u\n", value); | 
 | } | 
 |  | 
 | static ssize_t cxacru_sysfs_showattr_s8(s8 value, char *buf) | 
 | { | 
 | 	return snprintf(buf, PAGE_SIZE, "%d\n", value); | 
 | } | 
 |  | 
 | static ssize_t cxacru_sysfs_showattr_dB(s16 value, char *buf) | 
 | { | 
 | 	if (likely(value >= 0)) { | 
 | 		return snprintf(buf, PAGE_SIZE, "%u.%02u\n", | 
 | 					value / 100, value % 100); | 
 | 	} else { | 
 | 		value = -value; | 
 | 		return snprintf(buf, PAGE_SIZE, "-%u.%02u\n", | 
 | 					value / 100, value % 100); | 
 | 	} | 
 | } | 
 |  | 
 | static ssize_t cxacru_sysfs_showattr_bool(u32 value, char *buf) | 
 | { | 
 | 	static char *str[] = { "no", "yes" }; | 
 |  | 
 | 	if (unlikely(value >= ARRAY_SIZE(str))) | 
 | 		return snprintf(buf, PAGE_SIZE, "%u\n", value); | 
 | 	return snprintf(buf, PAGE_SIZE, "%s\n", str[value]); | 
 | } | 
 |  | 
 | static ssize_t cxacru_sysfs_showattr_LINK(u32 value, char *buf) | 
 | { | 
 | 	static char *str[] = { NULL, "not connected", "connected", "lost" }; | 
 |  | 
 | 	if (unlikely(value >= ARRAY_SIZE(str) || str[value] == NULL)) | 
 | 		return snprintf(buf, PAGE_SIZE, "%u\n", value); | 
 | 	return snprintf(buf, PAGE_SIZE, "%s\n", str[value]); | 
 | } | 
 |  | 
 | static ssize_t cxacru_sysfs_showattr_LINE(u32 value, char *buf) | 
 | { | 
 | 	static char *str[] = { "down", "attempting to activate", | 
 | 		"training", "channel analysis", "exchange", "up", | 
 | 		"waiting", "initialising" | 
 | 	}; | 
 | 	if (unlikely(value >= ARRAY_SIZE(str))) | 
 | 		return snprintf(buf, PAGE_SIZE, "%u\n", value); | 
 | 	return snprintf(buf, PAGE_SIZE, "%s\n", str[value]); | 
 | } | 
 |  | 
 | static ssize_t cxacru_sysfs_showattr_MODU(u32 value, char *buf) | 
 | { | 
 | 	static char *str[] = { | 
 | 			"", | 
 | 			"ANSI T1.413", | 
 | 			"ITU-T G.992.1 (G.DMT)", | 
 | 			"ITU-T G.992.2 (G.LITE)" | 
 | 	}; | 
 | 	if (unlikely(value >= ARRAY_SIZE(str))) | 
 | 		return snprintf(buf, PAGE_SIZE, "%u\n", value); | 
 | 	return snprintf(buf, PAGE_SIZE, "%s\n", str[value]); | 
 | } | 
 |  | 
 | /* | 
 |  * This could use MAC_ADDRESS_HIGH and MAC_ADDRESS_LOW, but since | 
 |  * this data is already in atm_dev there's no point. | 
 |  * | 
 |  * MAC_ADDRESS_HIGH = 0x????5544 | 
 |  * MAC_ADDRESS_LOW  = 0x33221100 | 
 |  * Where 00-55 are bytes 0-5 of the MAC. | 
 |  */ | 
 | static ssize_t mac_address_show(struct device *dev, | 
 | 	struct device_attribute *attr, char *buf) | 
 | { | 
 | 	struct cxacru_data *instance = to_usbatm_driver_data( | 
 | 			to_usb_interface(dev)); | 
 |  | 
 | 	if (instance == NULL || instance->usbatm->atm_dev == NULL) | 
 | 		return -ENODEV; | 
 |  | 
 | 	return snprintf(buf, PAGE_SIZE, "%pM\n", | 
 | 		instance->usbatm->atm_dev->esi); | 
 | } | 
 |  | 
 | static ssize_t adsl_state_show(struct device *dev, | 
 | 	struct device_attribute *attr, char *buf) | 
 | { | 
 | 	static char *str[] = { "running", "stopped" }; | 
 | 	struct cxacru_data *instance = to_usbatm_driver_data( | 
 | 			to_usb_interface(dev)); | 
 | 	u32 value; | 
 |  | 
 | 	if (instance == NULL) | 
 | 		return -ENODEV; | 
 |  | 
 | 	value = instance->card_info[CXINF_LINE_STARTABLE]; | 
 | 	if (unlikely(value >= ARRAY_SIZE(str))) | 
 | 		return snprintf(buf, PAGE_SIZE, "%u\n", value); | 
 | 	return snprintf(buf, PAGE_SIZE, "%s\n", str[value]); | 
 | } | 
 |  | 
 | static ssize_t adsl_state_store(struct device *dev, | 
 | 	struct device_attribute *attr, const char *buf, size_t count) | 
 | { | 
 | 	struct cxacru_data *instance = to_usbatm_driver_data( | 
 | 			to_usb_interface(dev)); | 
 | 	int ret; | 
 | 	int poll = -1; | 
 | 	char str_cmd[8]; | 
 | 	int len = strlen(buf); | 
 |  | 
 | 	if (!capable(CAP_NET_ADMIN)) | 
 | 		return -EACCES; | 
 |  | 
 | 	ret = sscanf(buf, "%7s", str_cmd); | 
 | 	if (ret != 1) | 
 | 		return -EINVAL; | 
 | 	ret = 0; | 
 |  | 
 | 	if (instance == NULL) | 
 | 		return -ENODEV; | 
 |  | 
 | 	if (mutex_lock_interruptible(&instance->adsl_state_serialize)) | 
 | 		return -ERESTARTSYS; | 
 |  | 
 | 	if (!strcmp(str_cmd, "stop") || !strcmp(str_cmd, "restart")) { | 
 | 		ret = cxacru_cm(instance, CM_REQUEST_CHIP_ADSL_LINE_STOP, NULL, 0, NULL, 0); | 
 | 		if (ret < 0) { | 
 | 			atm_err(instance->usbatm, "change adsl state:" | 
 | 				" CHIP_ADSL_LINE_STOP returned %d\n", ret); | 
 |  | 
 | 			ret = -EIO; | 
 | 		} else { | 
 | 			ret = len; | 
 | 			poll = CXPOLL_STOPPED; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* Line status is only updated every second | 
 | 	 * and the device appears to only react to | 
 | 	 * START/STOP every second too. Wait 1.5s to | 
 | 	 * be sure that restart will have an effect. */ | 
 | 	if (!strcmp(str_cmd, "restart")) | 
 | 		msleep(1500); | 
 |  | 
 | 	if (!strcmp(str_cmd, "start") || !strcmp(str_cmd, "restart")) { | 
 | 		ret = cxacru_cm(instance, CM_REQUEST_CHIP_ADSL_LINE_START, NULL, 0, NULL, 0); | 
 | 		if (ret < 0) { | 
 | 			atm_err(instance->usbatm, "change adsl state:" | 
 | 				" CHIP_ADSL_LINE_START returned %d\n", ret); | 
 |  | 
 | 			ret = -EIO; | 
 | 		} else { | 
 | 			ret = len; | 
 | 			poll = CXPOLL_POLLING; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (!strcmp(str_cmd, "poll")) { | 
 | 		ret = len; | 
 | 		poll = CXPOLL_POLLING; | 
 | 	} | 
 |  | 
 | 	if (ret == 0) { | 
 | 		ret = -EINVAL; | 
 | 		poll = -1; | 
 | 	} | 
 |  | 
 | 	if (poll == CXPOLL_POLLING) { | 
 | 		mutex_lock(&instance->poll_state_serialize); | 
 | 		switch (instance->poll_state) { | 
 | 		case CXPOLL_STOPPED: | 
 | 			/* start polling */ | 
 | 			instance->poll_state = CXPOLL_POLLING; | 
 | 			break; | 
 |  | 
 | 		case CXPOLL_STOPPING: | 
 | 			/* abort stop request */ | 
 | 			instance->poll_state = CXPOLL_POLLING; | 
 | 			/* fall through */ | 
 | 		case CXPOLL_POLLING: | 
 | 		case CXPOLL_SHUTDOWN: | 
 | 			/* don't start polling */ | 
 | 			poll = -1; | 
 | 		} | 
 | 		mutex_unlock(&instance->poll_state_serialize); | 
 | 	} else if (poll == CXPOLL_STOPPED) { | 
 | 		mutex_lock(&instance->poll_state_serialize); | 
 | 		/* request stop */ | 
 | 		if (instance->poll_state == CXPOLL_POLLING) | 
 | 			instance->poll_state = CXPOLL_STOPPING; | 
 | 		mutex_unlock(&instance->poll_state_serialize); | 
 | 	} | 
 |  | 
 | 	mutex_unlock(&instance->adsl_state_serialize); | 
 |  | 
 | 	if (poll == CXPOLL_POLLING) | 
 | 		cxacru_poll_status(&instance->poll_work.work); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* CM_REQUEST_CARD_DATA_GET times out, so no show attribute */ | 
 |  | 
 | static ssize_t adsl_config_store(struct device *dev, | 
 | 	struct device_attribute *attr, const char *buf, size_t count) | 
 | { | 
 | 	struct cxacru_data *instance = to_usbatm_driver_data( | 
 | 			to_usb_interface(dev)); | 
 | 	int len = strlen(buf); | 
 | 	int ret, pos, num; | 
 | 	__le32 data[CMD_PACKET_SIZE / 4]; | 
 |  | 
 | 	if (!capable(CAP_NET_ADMIN)) | 
 | 		return -EACCES; | 
 |  | 
 | 	if (instance == NULL) | 
 | 		return -ENODEV; | 
 |  | 
 | 	pos = 0; | 
 | 	num = 0; | 
 | 	while (pos < len) { | 
 | 		int tmp; | 
 | 		u32 index; | 
 | 		u32 value; | 
 |  | 
 | 		ret = sscanf(buf + pos, "%x=%x%n", &index, &value, &tmp); | 
 | 		if (ret < 2) | 
 | 			return -EINVAL; | 
 | 		if (index > 0x7f) | 
 | 			return -EINVAL; | 
 | 		if (tmp < 0 || tmp > len - pos) | 
 | 			return -EINVAL; | 
 | 		pos += tmp; | 
 |  | 
 | 		/* skip trailing newline */ | 
 | 		if (buf[pos] == '\n' && pos == len-1) | 
 | 			pos++; | 
 |  | 
 | 		data[num * 2 + 1] = cpu_to_le32(index); | 
 | 		data[num * 2 + 2] = cpu_to_le32(value); | 
 | 		num++; | 
 |  | 
 | 		/* send config values when data buffer is full | 
 | 		 * or no more data | 
 | 		 */ | 
 | 		if (pos >= len || num >= CMD_MAX_CONFIG) { | 
 | 			char log[CMD_MAX_CONFIG * 12 + 1]; /* %02x=%08x */ | 
 |  | 
 | 			data[0] = cpu_to_le32(num); | 
 | 			ret = cxacru_cm(instance, CM_REQUEST_CARD_DATA_SET, | 
 | 				(u8 *) data, 4 + num * 8, NULL, 0); | 
 | 			if (ret < 0) { | 
 | 				atm_err(instance->usbatm, | 
 | 					"set card data returned %d\n", ret); | 
 | 				return -EIO; | 
 | 			} | 
 |  | 
 | 			for (tmp = 0; tmp < num; tmp++) | 
 | 				snprintf(log + tmp*12, 13, " %02x=%08x", | 
 | 					le32_to_cpu(data[tmp * 2 + 1]), | 
 | 					le32_to_cpu(data[tmp * 2 + 2])); | 
 | 			atm_info(instance->usbatm, "config%s\n", log); | 
 | 			num = 0; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return len; | 
 | } | 
 |  | 
 | /* | 
 |  * All device attributes are included in CXACRU_ALL_FILES | 
 |  * so that the same list can be used multiple times: | 
 |  *     INIT   (define the device attributes) | 
 |  *     CREATE (create all the device files) | 
 |  *     REMOVE (remove all the device files) | 
 |  * | 
 |  * With the last two being defined as needed in the functions | 
 |  * they are used in before calling CXACRU_ALL_FILES() | 
 |  */ | 
 | #define CXACRU_ALL_FILES(_action) \ | 
 | CXACRU_ATTR_##_action(CXINF_DOWNSTREAM_RATE,           u32,  downstream_rate); \ | 
 | CXACRU_ATTR_##_action(CXINF_UPSTREAM_RATE,             u32,  upstream_rate); \ | 
 | CXACRU_ATTR_##_action(CXINF_LINK_STATUS,               LINK, link_status); \ | 
 | CXACRU_ATTR_##_action(CXINF_LINE_STATUS,               LINE, line_status); \ | 
 | CXACRU__ATTR_##_action(                                      mac_address); \ | 
 | CXACRU_ATTR_##_action(CXINF_UPSTREAM_SNR_MARGIN,       dB,   upstream_snr_margin); \ | 
 | CXACRU_ATTR_##_action(CXINF_DOWNSTREAM_SNR_MARGIN,     dB,   downstream_snr_margin); \ | 
 | CXACRU_ATTR_##_action(CXINF_UPSTREAM_ATTENUATION,      dB,   upstream_attenuation); \ | 
 | CXACRU_ATTR_##_action(CXINF_DOWNSTREAM_ATTENUATION,    dB,   downstream_attenuation); \ | 
 | CXACRU_ATTR_##_action(CXINF_TRANSMITTER_POWER,         s8,   transmitter_power); \ | 
 | CXACRU_ATTR_##_action(CXINF_UPSTREAM_BITS_PER_FRAME,   u32,  upstream_bits_per_frame); \ | 
 | CXACRU_ATTR_##_action(CXINF_DOWNSTREAM_BITS_PER_FRAME, u32,  downstream_bits_per_frame); \ | 
 | CXACRU_ATTR_##_action(CXINF_STARTUP_ATTEMPTS,          u32,  startup_attempts); \ | 
 | CXACRU_ATTR_##_action(CXINF_UPSTREAM_CRC_ERRORS,       u32,  upstream_crc_errors); \ | 
 | CXACRU_ATTR_##_action(CXINF_DOWNSTREAM_CRC_ERRORS,     u32,  downstream_crc_errors); \ | 
 | CXACRU_ATTR_##_action(CXINF_UPSTREAM_FEC_ERRORS,       u32,  upstream_fec_errors); \ | 
 | CXACRU_ATTR_##_action(CXINF_DOWNSTREAM_FEC_ERRORS,     u32,  downstream_fec_errors); \ | 
 | CXACRU_ATTR_##_action(CXINF_UPSTREAM_HEC_ERRORS,       u32,  upstream_hec_errors); \ | 
 | CXACRU_ATTR_##_action(CXINF_DOWNSTREAM_HEC_ERRORS,     u32,  downstream_hec_errors); \ | 
 | CXACRU_ATTR_##_action(CXINF_LINE_STARTABLE,            bool, line_startable); \ | 
 | CXACRU_ATTR_##_action(CXINF_MODULATION,                MODU, modulation); \ | 
 | CXACRU_ATTR_##_action(CXINF_ADSL_HEADEND,              u32,  adsl_headend); \ | 
 | CXACRU_ATTR_##_action(CXINF_ADSL_HEADEND_ENVIRONMENT,  u32,  adsl_headend_environment); \ | 
 | CXACRU_ATTR_##_action(CXINF_CONTROLLER_VERSION,        u32,  adsl_controller_version); \ | 
 | CXACRU_CMD_##_action(                                        adsl_state); \ | 
 | CXACRU_SET_##_action(                                        adsl_config); | 
 |  | 
 | CXACRU_ALL_FILES(INIT); | 
 |  | 
 | static struct attribute *cxacru_attrs[] = { | 
 | 	&dev_attr_adsl_config.attr, | 
 | 	&dev_attr_adsl_state.attr, | 
 | 	&dev_attr_adsl_controller_version.attr, | 
 | 	&dev_attr_adsl_headend_environment.attr, | 
 | 	&dev_attr_adsl_headend.attr, | 
 | 	&dev_attr_modulation.attr, | 
 | 	&dev_attr_line_startable.attr, | 
 | 	&dev_attr_downstream_hec_errors.attr, | 
 | 	&dev_attr_upstream_hec_errors.attr, | 
 | 	&dev_attr_downstream_fec_errors.attr, | 
 | 	&dev_attr_upstream_fec_errors.attr, | 
 | 	&dev_attr_downstream_crc_errors.attr, | 
 | 	&dev_attr_upstream_crc_errors.attr, | 
 | 	&dev_attr_startup_attempts.attr, | 
 | 	&dev_attr_downstream_bits_per_frame.attr, | 
 | 	&dev_attr_upstream_bits_per_frame.attr, | 
 | 	&dev_attr_transmitter_power.attr, | 
 | 	&dev_attr_downstream_attenuation.attr, | 
 | 	&dev_attr_upstream_attenuation.attr, | 
 | 	&dev_attr_downstream_snr_margin.attr, | 
 | 	&dev_attr_upstream_snr_margin.attr, | 
 | 	&dev_attr_mac_address.attr, | 
 | 	&dev_attr_line_status.attr, | 
 | 	&dev_attr_link_status.attr, | 
 | 	&dev_attr_upstream_rate.attr, | 
 | 	&dev_attr_downstream_rate.attr, | 
 | 	NULL, | 
 | }; | 
 | ATTRIBUTE_GROUPS(cxacru); | 
 |  | 
 | /* the following three functions are stolen from drivers/usb/core/message.c */ | 
 | static void cxacru_blocking_completion(struct urb *urb) | 
 | { | 
 | 	complete(urb->context); | 
 | } | 
 |  | 
 | struct cxacru_timer { | 
 | 	struct timer_list timer; | 
 | 	struct urb *urb; | 
 | }; | 
 |  | 
 | static void cxacru_timeout_kill(struct timer_list *t) | 
 | { | 
 | 	struct cxacru_timer *timer = from_timer(timer, t, timer); | 
 |  | 
 | 	usb_unlink_urb(timer->urb); | 
 | } | 
 |  | 
 | static int cxacru_start_wait_urb(struct urb *urb, struct completion *done, | 
 | 				 int *actual_length) | 
 | { | 
 | 	struct cxacru_timer timer = { | 
 | 		.urb = urb, | 
 | 	}; | 
 |  | 
 | 	timer_setup_on_stack(&timer.timer, cxacru_timeout_kill, 0); | 
 | 	mod_timer(&timer.timer, jiffies + msecs_to_jiffies(CMD_TIMEOUT)); | 
 | 	wait_for_completion(done); | 
 | 	del_timer_sync(&timer.timer); | 
 | 	destroy_timer_on_stack(&timer.timer); | 
 |  | 
 | 	if (actual_length) | 
 | 		*actual_length = urb->actual_length; | 
 | 	return urb->status; /* must read status after completion */ | 
 | } | 
 |  | 
 | static int cxacru_cm(struct cxacru_data *instance, enum cxacru_cm_request cm, | 
 | 		     u8 *wdata, int wsize, u8 *rdata, int rsize) | 
 | { | 
 | 	int ret, actlen; | 
 | 	int offb, offd; | 
 | 	const int stride = CMD_PACKET_SIZE - 4; | 
 | 	u8 *wbuf = instance->snd_buf; | 
 | 	u8 *rbuf = instance->rcv_buf; | 
 | 	int wbuflen = ((wsize - 1) / stride + 1) * CMD_PACKET_SIZE; | 
 | 	int rbuflen = ((rsize - 1) / stride + 1) * CMD_PACKET_SIZE; | 
 |  | 
 | 	if (wbuflen > PAGE_SIZE || rbuflen > PAGE_SIZE) { | 
 | 		if (printk_ratelimit()) | 
 | 			usb_err(instance->usbatm, "requested transfer size too large (%d, %d)\n", | 
 | 				wbuflen, rbuflen); | 
 | 		ret = -ENOMEM; | 
 | 		goto err; | 
 | 	} | 
 |  | 
 | 	mutex_lock(&instance->cm_serialize); | 
 |  | 
 | 	/* submit reading urb before the writing one */ | 
 | 	init_completion(&instance->rcv_done); | 
 | 	ret = usb_submit_urb(instance->rcv_urb, GFP_KERNEL); | 
 | 	if (ret < 0) { | 
 | 		if (printk_ratelimit()) | 
 | 			usb_err(instance->usbatm, "submit of read urb for cm %#x failed (%d)\n", | 
 | 				cm, ret); | 
 | 		goto fail; | 
 | 	} | 
 |  | 
 | 	memset(wbuf, 0, wbuflen); | 
 | 	/* handle wsize == 0 */ | 
 | 	wbuf[0] = cm; | 
 | 	for (offb = offd = 0; offd < wsize; offd += stride, offb += CMD_PACKET_SIZE) { | 
 | 		wbuf[offb] = cm; | 
 | 		memcpy(wbuf + offb + 4, wdata + offd, min_t(int, stride, wsize - offd)); | 
 | 	} | 
 |  | 
 | 	instance->snd_urb->transfer_buffer_length = wbuflen; | 
 | 	init_completion(&instance->snd_done); | 
 | 	ret = usb_submit_urb(instance->snd_urb, GFP_KERNEL); | 
 | 	if (ret < 0) { | 
 | 		if (printk_ratelimit()) | 
 | 			usb_err(instance->usbatm, "submit of write urb for cm %#x failed (%d)\n", | 
 | 				cm, ret); | 
 | 		goto fail; | 
 | 	} | 
 |  | 
 | 	ret = cxacru_start_wait_urb(instance->snd_urb, &instance->snd_done, NULL); | 
 | 	if (ret < 0) { | 
 | 		if (printk_ratelimit()) | 
 | 			usb_err(instance->usbatm, "send of cm %#x failed (%d)\n", cm, ret); | 
 | 		goto fail; | 
 | 	} | 
 |  | 
 | 	ret = cxacru_start_wait_urb(instance->rcv_urb, &instance->rcv_done, &actlen); | 
 | 	if (ret < 0) { | 
 | 		if (printk_ratelimit()) | 
 | 			usb_err(instance->usbatm, "receive of cm %#x failed (%d)\n", cm, ret); | 
 | 		goto fail; | 
 | 	} | 
 | 	if (actlen % CMD_PACKET_SIZE || !actlen) { | 
 | 		if (printk_ratelimit()) | 
 | 			usb_err(instance->usbatm, "invalid response length to cm %#x: %d\n", | 
 | 				cm, actlen); | 
 | 		ret = -EIO; | 
 | 		goto fail; | 
 | 	} | 
 |  | 
 | 	/* check the return status and copy the data to the output buffer, if needed */ | 
 | 	for (offb = offd = 0; offd < rsize && offb < actlen; offb += CMD_PACKET_SIZE) { | 
 | 		if (rbuf[offb] != cm) { | 
 | 			if (printk_ratelimit()) | 
 | 				usb_err(instance->usbatm, "wrong cm %#x in response to cm %#x\n", | 
 | 					rbuf[offb], cm); | 
 | 			ret = -EIO; | 
 | 			goto fail; | 
 | 		} | 
 | 		if (rbuf[offb + 1] != CM_STATUS_SUCCESS) { | 
 | 			if (printk_ratelimit()) | 
 | 				usb_err(instance->usbatm, "response to cm %#x failed: %#x\n", | 
 | 					cm, rbuf[offb + 1]); | 
 | 			ret = -EIO; | 
 | 			goto fail; | 
 | 		} | 
 | 		if (offd >= rsize) | 
 | 			break; | 
 | 		memcpy(rdata + offd, rbuf + offb + 4, min_t(int, stride, rsize - offd)); | 
 | 		offd += stride; | 
 | 	} | 
 |  | 
 | 	ret = offd; | 
 | 	usb_dbg(instance->usbatm, "cm %#x\n", cm); | 
 | fail: | 
 | 	mutex_unlock(&instance->cm_serialize); | 
 | err: | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int cxacru_cm_get_array(struct cxacru_data *instance, enum cxacru_cm_request cm, | 
 | 			       u32 *data, int size) | 
 | { | 
 | 	int ret, len; | 
 | 	__le32 *buf; | 
 | 	int offb; | 
 | 	unsigned int offd; | 
 | 	const int stride = CMD_PACKET_SIZE / (4 * 2) - 1; | 
 | 	int buflen =  ((size - 1) / stride + 1 + size * 2) * 4; | 
 |  | 
 | 	buf = kmalloc(buflen, GFP_KERNEL); | 
 | 	if (!buf) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	ret = cxacru_cm(instance, cm, NULL, 0, (u8 *) buf, buflen); | 
 | 	if (ret < 0) | 
 | 		goto cleanup; | 
 |  | 
 | 	/* len > 0 && len % 4 == 0 guaranteed by cxacru_cm() */ | 
 | 	len = ret / 4; | 
 | 	for (offb = 0; offb < len; ) { | 
 | 		int l = le32_to_cpu(buf[offb++]); | 
 |  | 
 | 		if (l < 0 || l > stride || l > (len - offb) / 2) { | 
 | 			if (printk_ratelimit()) | 
 | 				usb_err(instance->usbatm, "invalid data length from cm %#x: %d\n", | 
 | 					cm, l); | 
 | 			ret = -EIO; | 
 | 			goto cleanup; | 
 | 		} | 
 | 		while (l--) { | 
 | 			offd = le32_to_cpu(buf[offb++]); | 
 | 			if (offd >= size) { | 
 | 				if (printk_ratelimit()) | 
 | 					usb_err(instance->usbatm, "wrong index %#x in response to cm %#x\n", | 
 | 						offd, cm); | 
 | 				ret = -EIO; | 
 | 				goto cleanup; | 
 | 			} | 
 | 			data[offd] = le32_to_cpu(buf[offb++]); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	ret = 0; | 
 |  | 
 | cleanup: | 
 | 	kfree(buf); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int cxacru_card_status(struct cxacru_data *instance) | 
 | { | 
 | 	int ret = cxacru_cm(instance, CM_REQUEST_CARD_GET_STATUS, NULL, 0, NULL, 0); | 
 |  | 
 | 	if (ret < 0) {		/* firmware not loaded */ | 
 | 		usb_dbg(instance->usbatm, "cxacru_adsl_start: CARD_GET_STATUS returned %d\n", ret); | 
 | 		return ret; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int cxacru_atm_start(struct usbatm_data *usbatm_instance, | 
 | 		struct atm_dev *atm_dev) | 
 | { | 
 | 	struct cxacru_data *instance = usbatm_instance->driver_data; | 
 | 	struct usb_interface *intf = usbatm_instance->usb_intf; | 
 | 	int ret; | 
 | 	int start_polling = 1; | 
 |  | 
 | 	dev_dbg(&intf->dev, "%s\n", __func__); | 
 |  | 
 | 	/* Read MAC address */ | 
 | 	ret = cxacru_cm(instance, CM_REQUEST_CARD_GET_MAC_ADDRESS, NULL, 0, | 
 | 			atm_dev->esi, sizeof(atm_dev->esi)); | 
 | 	if (ret < 0) { | 
 | 		atm_err(usbatm_instance, "cxacru_atm_start: CARD_GET_MAC_ADDRESS returned %d\n", ret); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	/* start ADSL */ | 
 | 	mutex_lock(&instance->adsl_state_serialize); | 
 | 	ret = cxacru_cm(instance, CM_REQUEST_CHIP_ADSL_LINE_START, NULL, 0, NULL, 0); | 
 | 	if (ret < 0) | 
 | 		atm_err(usbatm_instance, "cxacru_atm_start: CHIP_ADSL_LINE_START returned %d\n", ret); | 
 |  | 
 | 	/* Start status polling */ | 
 | 	mutex_lock(&instance->poll_state_serialize); | 
 | 	switch (instance->poll_state) { | 
 | 	case CXPOLL_STOPPED: | 
 | 		/* start polling */ | 
 | 		instance->poll_state = CXPOLL_POLLING; | 
 | 		break; | 
 |  | 
 | 	case CXPOLL_STOPPING: | 
 | 		/* abort stop request */ | 
 | 		instance->poll_state = CXPOLL_POLLING; | 
 | 		/* fall through */ | 
 | 	case CXPOLL_POLLING: | 
 | 	case CXPOLL_SHUTDOWN: | 
 | 		/* don't start polling */ | 
 | 		start_polling = 0; | 
 | 	} | 
 | 	mutex_unlock(&instance->poll_state_serialize); | 
 | 	mutex_unlock(&instance->adsl_state_serialize); | 
 |  | 
 | 	printk(KERN_INFO "%s%d: %s %pM\n", atm_dev->type, atm_dev->number, | 
 | 			usbatm_instance->description, atm_dev->esi); | 
 |  | 
 | 	if (start_polling) | 
 | 		cxacru_poll_status(&instance->poll_work.work); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void cxacru_poll_status(struct work_struct *work) | 
 | { | 
 | 	struct cxacru_data *instance = | 
 | 		container_of(work, struct cxacru_data, poll_work.work); | 
 | 	u32 buf[CXINF_MAX] = {}; | 
 | 	struct usbatm_data *usbatm = instance->usbatm; | 
 | 	struct atm_dev *atm_dev = usbatm->atm_dev; | 
 | 	int keep_polling = 1; | 
 | 	int ret; | 
 |  | 
 | 	ret = cxacru_cm_get_array(instance, CM_REQUEST_CARD_INFO_GET, buf, CXINF_MAX); | 
 | 	if (ret < 0) { | 
 | 		if (ret != -ESHUTDOWN) | 
 | 			atm_warn(usbatm, "poll status: error %d\n", ret); | 
 |  | 
 | 		mutex_lock(&instance->poll_state_serialize); | 
 | 		if (instance->poll_state != CXPOLL_SHUTDOWN) { | 
 | 			instance->poll_state = CXPOLL_STOPPED; | 
 |  | 
 | 			if (ret != -ESHUTDOWN) | 
 | 				atm_warn(usbatm, "polling disabled, set adsl_state" | 
 | 						" to 'start' or 'poll' to resume\n"); | 
 | 		} | 
 | 		mutex_unlock(&instance->poll_state_serialize); | 
 | 		goto reschedule; | 
 | 	} | 
 |  | 
 | 	memcpy(instance->card_info, buf, sizeof(instance->card_info)); | 
 |  | 
 | 	if (instance->adsl_status != buf[CXINF_LINE_STARTABLE]) { | 
 | 		instance->adsl_status = buf[CXINF_LINE_STARTABLE]; | 
 |  | 
 | 		switch (instance->adsl_status) { | 
 | 		case 0: | 
 | 			atm_printk(KERN_INFO, usbatm, "ADSL state: running\n"); | 
 | 			break; | 
 |  | 
 | 		case 1: | 
 | 			atm_printk(KERN_INFO, usbatm, "ADSL state: stopped\n"); | 
 | 			break; | 
 |  | 
 | 		default: | 
 | 			atm_printk(KERN_INFO, usbatm, "Unknown adsl status %02x\n", instance->adsl_status); | 
 | 			break; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (instance->line_status == buf[CXINF_LINE_STATUS]) | 
 | 		goto reschedule; | 
 |  | 
 | 	instance->line_status = buf[CXINF_LINE_STATUS]; | 
 | 	switch (instance->line_status) { | 
 | 	case 0: | 
 | 		atm_dev_signal_change(atm_dev, ATM_PHY_SIG_LOST); | 
 | 		atm_info(usbatm, "ADSL line: down\n"); | 
 | 		break; | 
 |  | 
 | 	case 1: | 
 | 		atm_dev_signal_change(atm_dev, ATM_PHY_SIG_LOST); | 
 | 		atm_info(usbatm, "ADSL line: attempting to activate\n"); | 
 | 		break; | 
 |  | 
 | 	case 2: | 
 | 		atm_dev_signal_change(atm_dev, ATM_PHY_SIG_LOST); | 
 | 		atm_info(usbatm, "ADSL line: training\n"); | 
 | 		break; | 
 |  | 
 | 	case 3: | 
 | 		atm_dev_signal_change(atm_dev, ATM_PHY_SIG_LOST); | 
 | 		atm_info(usbatm, "ADSL line: channel analysis\n"); | 
 | 		break; | 
 |  | 
 | 	case 4: | 
 | 		atm_dev_signal_change(atm_dev, ATM_PHY_SIG_LOST); | 
 | 		atm_info(usbatm, "ADSL line: exchange\n"); | 
 | 		break; | 
 |  | 
 | 	case 5: | 
 | 		atm_dev->link_rate = buf[CXINF_DOWNSTREAM_RATE] * 1000 / 424; | 
 | 		atm_dev_signal_change(atm_dev, ATM_PHY_SIG_FOUND); | 
 |  | 
 | 		atm_info(usbatm, "ADSL line: up (%d kb/s down | %d kb/s up)\n", | 
 | 		     buf[CXINF_DOWNSTREAM_RATE], buf[CXINF_UPSTREAM_RATE]); | 
 | 		break; | 
 |  | 
 | 	case 6: | 
 | 		atm_dev_signal_change(atm_dev, ATM_PHY_SIG_LOST); | 
 | 		atm_info(usbatm, "ADSL line: waiting\n"); | 
 | 		break; | 
 |  | 
 | 	case 7: | 
 | 		atm_dev_signal_change(atm_dev, ATM_PHY_SIG_LOST); | 
 | 		atm_info(usbatm, "ADSL line: initializing\n"); | 
 | 		break; | 
 |  | 
 | 	default: | 
 | 		atm_dev_signal_change(atm_dev, ATM_PHY_SIG_UNKNOWN); | 
 | 		atm_info(usbatm, "Unknown line state %02x\n", instance->line_status); | 
 | 		break; | 
 | 	} | 
 | reschedule: | 
 |  | 
 | 	mutex_lock(&instance->poll_state_serialize); | 
 | 	if (instance->poll_state == CXPOLL_STOPPING && | 
 | 				instance->adsl_status == 1 && /* stopped */ | 
 | 				instance->line_status == 0) /* down */ | 
 | 		instance->poll_state = CXPOLL_STOPPED; | 
 |  | 
 | 	if (instance->poll_state == CXPOLL_STOPPED) | 
 | 		keep_polling = 0; | 
 | 	mutex_unlock(&instance->poll_state_serialize); | 
 |  | 
 | 	if (keep_polling) | 
 | 		schedule_delayed_work(&instance->poll_work, | 
 | 				round_jiffies_relative(POLL_INTERVAL*HZ)); | 
 | } | 
 |  | 
 | static int cxacru_fw(struct usb_device *usb_dev, enum cxacru_fw_request fw, | 
 | 		     u8 code1, u8 code2, u32 addr, const u8 *data, int size) | 
 | { | 
 | 	int ret; | 
 | 	u8 *buf; | 
 | 	int offd, offb; | 
 | 	const int stride = CMD_PACKET_SIZE - 8; | 
 |  | 
 | 	buf = (u8 *) __get_free_page(GFP_KERNEL); | 
 | 	if (!buf) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	offb = offd = 0; | 
 | 	do { | 
 | 		int l = min_t(int, stride, size - offd); | 
 |  | 
 | 		buf[offb++] = fw; | 
 | 		buf[offb++] = l; | 
 | 		buf[offb++] = code1; | 
 | 		buf[offb++] = code2; | 
 | 		put_unaligned(cpu_to_le32(addr), (__le32 *)(buf + offb)); | 
 | 		offb += 4; | 
 | 		addr += l; | 
 | 		if (l) | 
 | 			memcpy(buf + offb, data + offd, l); | 
 | 		if (l < stride) | 
 | 			memset(buf + offb + l, 0, stride - l); | 
 | 		offb += stride; | 
 | 		offd += stride; | 
 | 		if ((offb >= PAGE_SIZE) || (offd >= size)) { | 
 | 			ret = usb_bulk_msg(usb_dev, usb_sndbulkpipe(usb_dev, CXACRU_EP_CMD), | 
 | 					   buf, offb, NULL, CMD_TIMEOUT); | 
 | 			if (ret < 0) { | 
 | 				dev_dbg(&usb_dev->dev, "sending fw %#x failed\n", fw); | 
 | 				goto cleanup; | 
 | 			} | 
 | 			offb = 0; | 
 | 		} | 
 | 	} while (offd < size); | 
 | 	dev_dbg(&usb_dev->dev, "sent fw %#x\n", fw); | 
 |  | 
 | 	ret = 0; | 
 |  | 
 | cleanup: | 
 | 	free_page((unsigned long) buf); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static void cxacru_upload_firmware(struct cxacru_data *instance, | 
 | 				   const struct firmware *fw, | 
 | 				   const struct firmware *bp) | 
 | { | 
 | 	int ret; | 
 | 	struct usbatm_data *usbatm = instance->usbatm; | 
 | 	struct usb_device *usb_dev = usbatm->usb_dev; | 
 | 	__le16 signature[] = { usb_dev->descriptor.idVendor, | 
 | 			       usb_dev->descriptor.idProduct }; | 
 | 	__le32 val; | 
 |  | 
 | 	usb_dbg(usbatm, "%s\n", __func__); | 
 |  | 
 | 	/* FirmwarePllFClkValue */ | 
 | 	val = cpu_to_le32(instance->modem_type->pll_f_clk); | 
 | 	ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, PLLFCLK_ADDR, (u8 *) &val, 4); | 
 | 	if (ret) { | 
 | 		usb_err(usbatm, "FirmwarePllFClkValue failed: %d\n", ret); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	/* FirmwarePllBClkValue */ | 
 | 	val = cpu_to_le32(instance->modem_type->pll_b_clk); | 
 | 	ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, PLLBCLK_ADDR, (u8 *) &val, 4); | 
 | 	if (ret) { | 
 | 		usb_err(usbatm, "FirmwarePllBClkValue failed: %d\n", ret); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	/* Enable SDRAM */ | 
 | 	val = cpu_to_le32(SDRAM_ENA); | 
 | 	ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, SDRAMEN_ADDR, (u8 *) &val, 4); | 
 | 	if (ret) { | 
 | 		usb_err(usbatm, "Enable SDRAM failed: %d\n", ret); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	/* Firmware */ | 
 | 	usb_info(usbatm, "loading firmware\n"); | 
 | 	ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, FW_ADDR, fw->data, fw->size); | 
 | 	if (ret) { | 
 | 		usb_err(usbatm, "Firmware upload failed: %d\n", ret); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	/* Boot ROM patch */ | 
 | 	if (instance->modem_type->boot_rom_patch) { | 
 | 		usb_info(usbatm, "loading boot ROM patch\n"); | 
 | 		ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, BR_ADDR, bp->data, bp->size); | 
 | 		if (ret) { | 
 | 			usb_err(usbatm, "Boot ROM patching failed: %d\n", ret); | 
 | 			return; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* Signature */ | 
 | 	ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, SIG_ADDR, (u8 *) signature, 4); | 
 | 	if (ret) { | 
 | 		usb_err(usbatm, "Signature storing failed: %d\n", ret); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	usb_info(usbatm, "starting device\n"); | 
 | 	if (instance->modem_type->boot_rom_patch) { | 
 | 		val = cpu_to_le32(BR_ADDR); | 
 | 		ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, BR_STACK_ADDR, (u8 *) &val, 4); | 
 | 	} else { | 
 | 		ret = cxacru_fw(usb_dev, FW_GOTO_MEM, 0x0, 0x0, FW_ADDR, NULL, 0); | 
 | 	} | 
 | 	if (ret) { | 
 | 		usb_err(usbatm, "Passing control to firmware failed: %d\n", ret); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	/* Delay to allow firmware to start up. */ | 
 | 	msleep_interruptible(1000); | 
 |  | 
 | 	usb_clear_halt(usb_dev, usb_sndbulkpipe(usb_dev, CXACRU_EP_CMD)); | 
 | 	usb_clear_halt(usb_dev, usb_rcvbulkpipe(usb_dev, CXACRU_EP_CMD)); | 
 | 	usb_clear_halt(usb_dev, usb_sndbulkpipe(usb_dev, CXACRU_EP_DATA)); | 
 | 	usb_clear_halt(usb_dev, usb_rcvbulkpipe(usb_dev, CXACRU_EP_DATA)); | 
 |  | 
 | 	ret = cxacru_cm(instance, CM_REQUEST_CARD_GET_STATUS, NULL, 0, NULL, 0); | 
 | 	if (ret < 0) { | 
 | 		usb_err(usbatm, "modem failed to initialize: %d\n", ret); | 
 | 		return; | 
 | 	} | 
 | } | 
 |  | 
 | static int cxacru_find_firmware(struct cxacru_data *instance, | 
 | 				char *phase, const struct firmware **fw_p) | 
 | { | 
 | 	struct usbatm_data *usbatm = instance->usbatm; | 
 | 	struct device *dev = &usbatm->usb_intf->dev; | 
 | 	char buf[16]; | 
 |  | 
 | 	sprintf(buf, "cxacru-%s.bin", phase); | 
 | 	usb_dbg(usbatm, "cxacru_find_firmware: looking for %s\n", buf); | 
 |  | 
 | 	if (request_firmware(fw_p, buf, dev)) { | 
 | 		usb_dbg(usbatm, "no stage %s firmware found\n", phase); | 
 | 		return -ENOENT; | 
 | 	} | 
 |  | 
 | 	usb_info(usbatm, "found firmware %s\n", buf); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int cxacru_heavy_init(struct usbatm_data *usbatm_instance, | 
 | 			     struct usb_interface *usb_intf) | 
 | { | 
 | 	const struct firmware *fw, *bp; | 
 | 	struct cxacru_data *instance = usbatm_instance->driver_data; | 
 | 	int ret = cxacru_find_firmware(instance, "fw", &fw); | 
 |  | 
 | 	if (ret) { | 
 | 		usb_warn(usbatm_instance, "firmware (cxacru-fw.bin) unavailable (system misconfigured?)\n"); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	if (instance->modem_type->boot_rom_patch) { | 
 | 		ret = cxacru_find_firmware(instance, "bp", &bp); | 
 | 		if (ret) { | 
 | 			usb_warn(usbatm_instance, "boot ROM patch (cxacru-bp.bin) unavailable (system misconfigured?)\n"); | 
 | 			release_firmware(fw); | 
 | 			return ret; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	cxacru_upload_firmware(instance, fw, bp); | 
 |  | 
 | 	if (instance->modem_type->boot_rom_patch) | 
 | 		release_firmware(bp); | 
 | 	release_firmware(fw); | 
 |  | 
 | 	ret = cxacru_card_status(instance); | 
 | 	if (ret) | 
 | 		usb_dbg(usbatm_instance, "modem initialisation failed\n"); | 
 | 	else | 
 | 		usb_dbg(usbatm_instance, "done setting up the modem\n"); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int cxacru_bind(struct usbatm_data *usbatm_instance, | 
 | 		       struct usb_interface *intf, const struct usb_device_id *id) | 
 | { | 
 | 	struct cxacru_data *instance; | 
 | 	struct usb_device *usb_dev = interface_to_usbdev(intf); | 
 | 	struct usb_host_endpoint *cmd_ep = usb_dev->ep_in[CXACRU_EP_CMD]; | 
 | 	struct usb_endpoint_descriptor *in, *out; | 
 | 	int ret; | 
 |  | 
 | 	/* instance init */ | 
 | 	instance = kzalloc(sizeof(*instance), GFP_KERNEL); | 
 | 	if (!instance) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	instance->usbatm = usbatm_instance; | 
 | 	instance->modem_type = (struct cxacru_modem_type *) id->driver_info; | 
 |  | 
 | 	mutex_init(&instance->poll_state_serialize); | 
 | 	instance->poll_state = CXPOLL_STOPPED; | 
 | 	instance->line_status = -1; | 
 | 	instance->adsl_status = -1; | 
 |  | 
 | 	mutex_init(&instance->adsl_state_serialize); | 
 |  | 
 | 	instance->rcv_buf = (u8 *) __get_free_page(GFP_KERNEL); | 
 | 	if (!instance->rcv_buf) { | 
 | 		usb_dbg(usbatm_instance, "cxacru_bind: no memory for rcv_buf\n"); | 
 | 		ret = -ENOMEM; | 
 | 		goto fail; | 
 | 	} | 
 | 	instance->snd_buf = (u8 *) __get_free_page(GFP_KERNEL); | 
 | 	if (!instance->snd_buf) { | 
 | 		usb_dbg(usbatm_instance, "cxacru_bind: no memory for snd_buf\n"); | 
 | 		ret = -ENOMEM; | 
 | 		goto fail; | 
 | 	} | 
 | 	instance->rcv_urb = usb_alloc_urb(0, GFP_KERNEL); | 
 | 	if (!instance->rcv_urb) { | 
 | 		ret = -ENOMEM; | 
 | 		goto fail; | 
 | 	} | 
 | 	instance->snd_urb = usb_alloc_urb(0, GFP_KERNEL); | 
 | 	if (!instance->snd_urb) { | 
 | 		ret = -ENOMEM; | 
 | 		goto fail; | 
 | 	} | 
 |  | 
 | 	if (!cmd_ep) { | 
 | 		usb_dbg(usbatm_instance, "cxacru_bind: no command endpoint\n"); | 
 | 		ret = -ENODEV; | 
 | 		goto fail; | 
 | 	} | 
 |  | 
 | 	if (usb_endpoint_xfer_int(&cmd_ep->desc)) | 
 | 		ret = usb_find_common_endpoints(intf->cur_altsetting, | 
 | 						NULL, NULL, &in, &out); | 
 | 	else | 
 | 		ret = usb_find_common_endpoints(intf->cur_altsetting, | 
 | 						&in, &out, NULL, NULL); | 
 |  | 
 | 	if (ret) { | 
 | 		usb_err(usbatm_instance, "cxacru_bind: interface has incorrect endpoints\n"); | 
 | 		ret = -ENODEV; | 
 | 		goto fail; | 
 | 	} | 
 |  | 
 | 	if ((cmd_ep->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) | 
 | 			== USB_ENDPOINT_XFER_INT) { | 
 | 		usb_fill_int_urb(instance->rcv_urb, | 
 | 			usb_dev, usb_rcvintpipe(usb_dev, CXACRU_EP_CMD), | 
 | 			instance->rcv_buf, PAGE_SIZE, | 
 | 			cxacru_blocking_completion, &instance->rcv_done, 1); | 
 |  | 
 | 		usb_fill_int_urb(instance->snd_urb, | 
 | 			usb_dev, usb_sndintpipe(usb_dev, CXACRU_EP_CMD), | 
 | 			instance->snd_buf, PAGE_SIZE, | 
 | 			cxacru_blocking_completion, &instance->snd_done, 4); | 
 | 	} else { | 
 | 		usb_fill_bulk_urb(instance->rcv_urb, | 
 | 			usb_dev, usb_rcvbulkpipe(usb_dev, CXACRU_EP_CMD), | 
 | 			instance->rcv_buf, PAGE_SIZE, | 
 | 			cxacru_blocking_completion, &instance->rcv_done); | 
 |  | 
 | 		usb_fill_bulk_urb(instance->snd_urb, | 
 | 			usb_dev, usb_sndbulkpipe(usb_dev, CXACRU_EP_CMD), | 
 | 			instance->snd_buf, PAGE_SIZE, | 
 | 			cxacru_blocking_completion, &instance->snd_done); | 
 | 	} | 
 |  | 
 | 	mutex_init(&instance->cm_serialize); | 
 |  | 
 | 	INIT_DELAYED_WORK(&instance->poll_work, cxacru_poll_status); | 
 |  | 
 | 	usbatm_instance->driver_data = instance; | 
 |  | 
 | 	usbatm_instance->flags = (cxacru_card_status(instance) ? 0 : UDSL_SKIP_HEAVY_INIT); | 
 |  | 
 | 	return 0; | 
 |  | 
 |  fail: | 
 | 	free_page((unsigned long) instance->snd_buf); | 
 | 	free_page((unsigned long) instance->rcv_buf); | 
 | 	usb_free_urb(instance->snd_urb); | 
 | 	usb_free_urb(instance->rcv_urb); | 
 | 	kfree(instance); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static void cxacru_unbind(struct usbatm_data *usbatm_instance, | 
 | 		struct usb_interface *intf) | 
 | { | 
 | 	struct cxacru_data *instance = usbatm_instance->driver_data; | 
 | 	int is_polling = 1; | 
 |  | 
 | 	usb_dbg(usbatm_instance, "cxacru_unbind entered\n"); | 
 |  | 
 | 	if (!instance) { | 
 | 		usb_dbg(usbatm_instance, "cxacru_unbind: NULL instance!\n"); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	mutex_lock(&instance->poll_state_serialize); | 
 | 	BUG_ON(instance->poll_state == CXPOLL_SHUTDOWN); | 
 |  | 
 | 	/* ensure that status polling continues unless | 
 | 	 * it has already stopped */ | 
 | 	if (instance->poll_state == CXPOLL_STOPPED) | 
 | 		is_polling = 0; | 
 |  | 
 | 	/* stop polling from being stopped or started */ | 
 | 	instance->poll_state = CXPOLL_SHUTDOWN; | 
 | 	mutex_unlock(&instance->poll_state_serialize); | 
 |  | 
 | 	if (is_polling) | 
 | 		cancel_delayed_work_sync(&instance->poll_work); | 
 |  | 
 | 	usb_kill_urb(instance->snd_urb); | 
 | 	usb_kill_urb(instance->rcv_urb); | 
 | 	usb_free_urb(instance->snd_urb); | 
 | 	usb_free_urb(instance->rcv_urb); | 
 |  | 
 | 	free_page((unsigned long) instance->snd_buf); | 
 | 	free_page((unsigned long) instance->rcv_buf); | 
 |  | 
 | 	kfree(instance); | 
 |  | 
 | 	usbatm_instance->driver_data = NULL; | 
 | } | 
 |  | 
 | static const struct cxacru_modem_type cxacru_cafe = { | 
 | 	.pll_f_clk = 0x02d874df, | 
 | 	.pll_b_clk = 0x0196a51a, | 
 | 	.boot_rom_patch = 1, | 
 | }; | 
 |  | 
 | static const struct cxacru_modem_type cxacru_cb00 = { | 
 | 	.pll_f_clk = 0x5, | 
 | 	.pll_b_clk = 0x3, | 
 | 	.boot_rom_patch = 0, | 
 | }; | 
 |  | 
 | static const struct usb_device_id cxacru_usb_ids[] = { | 
 | 	{ /* V = Conexant			P = ADSL modem (Euphrates project)	*/ | 
 | 		USB_DEVICE(0x0572, 0xcafe),	.driver_info = (unsigned long) &cxacru_cafe | 
 | 	}, | 
 | 	{ /* V = Conexant			P = ADSL modem (Hasbani project)	*/ | 
 | 		USB_DEVICE(0x0572, 0xcb00),	.driver_info = (unsigned long) &cxacru_cb00 | 
 | 	}, | 
 | 	{ /* V = Conexant			P = ADSL modem				*/ | 
 | 		USB_DEVICE(0x0572, 0xcb01),	.driver_info = (unsigned long) &cxacru_cb00 | 
 | 	}, | 
 | 	{ /* V = Conexant			P = ADSL modem (Well PTI-800) */ | 
 | 		USB_DEVICE(0x0572, 0xcb02),	.driver_info = (unsigned long) &cxacru_cb00 | 
 | 	}, | 
 | 	{ /* V = Conexant			P = ADSL modem				*/ | 
 | 		USB_DEVICE(0x0572, 0xcb06),	.driver_info = (unsigned long) &cxacru_cb00 | 
 | 	}, | 
 | 	{ /* V = Conexant			P = ADSL modem (ZTE ZXDSL 852)		*/ | 
 | 		USB_DEVICE(0x0572, 0xcb07),	.driver_info = (unsigned long) &cxacru_cb00 | 
 | 	}, | 
 | 	{ /* V = Olitec				P = ADSL modem version 2		*/ | 
 | 		USB_DEVICE(0x08e3, 0x0100),	.driver_info = (unsigned long) &cxacru_cafe | 
 | 	}, | 
 | 	{ /* V = Olitec				P = ADSL modem version 3		*/ | 
 | 		USB_DEVICE(0x08e3, 0x0102),	.driver_info = (unsigned long) &cxacru_cb00 | 
 | 	}, | 
 | 	{ /* V = Trust/Amigo Technology Co.	P = AMX-CA86U				*/ | 
 | 		USB_DEVICE(0x0eb0, 0x3457),	.driver_info = (unsigned long) &cxacru_cafe | 
 | 	}, | 
 | 	{ /* V = Zoom				P = 5510				*/ | 
 | 		USB_DEVICE(0x1803, 0x5510),	.driver_info = (unsigned long) &cxacru_cb00 | 
 | 	}, | 
 | 	{ /* V = Draytek			P = Vigor 318				*/ | 
 | 		USB_DEVICE(0x0675, 0x0200),	.driver_info = (unsigned long) &cxacru_cb00 | 
 | 	}, | 
 | 	{ /* V = Zyxel				P = 630-C1 aka OMNI ADSL USB (Annex A)	*/ | 
 | 		USB_DEVICE(0x0586, 0x330a),	.driver_info = (unsigned long) &cxacru_cb00 | 
 | 	}, | 
 | 	{ /* V = Zyxel				P = 630-C3 aka OMNI ADSL USB (Annex B)	*/ | 
 | 		USB_DEVICE(0x0586, 0x330b),	.driver_info = (unsigned long) &cxacru_cb00 | 
 | 	}, | 
 | 	{ /* V = Aethra				P = Starmodem UM1020			*/ | 
 | 		USB_DEVICE(0x0659, 0x0020),	.driver_info = (unsigned long) &cxacru_cb00 | 
 | 	}, | 
 | 	{ /* V = Aztech Systems			P = ? AKA Pirelli AUA-010		*/ | 
 | 		USB_DEVICE(0x0509, 0x0812),	.driver_info = (unsigned long) &cxacru_cb00 | 
 | 	}, | 
 | 	{ /* V = Netopia			P = Cayman 3341(Annex A)/3351(Annex B)	*/ | 
 | 		USB_DEVICE(0x100d, 0xcb01),	.driver_info = (unsigned long) &cxacru_cb00 | 
 | 	}, | 
 | 	{ /* V = Netopia			P = Cayman 3342(Annex A)/3352(Annex B)	*/ | 
 | 		USB_DEVICE(0x100d, 0x3342),	.driver_info = (unsigned long) &cxacru_cb00 | 
 | 	}, | 
 | 	{} | 
 | }; | 
 |  | 
 | MODULE_DEVICE_TABLE(usb, cxacru_usb_ids); | 
 |  | 
 | static struct usbatm_driver cxacru_driver = { | 
 | 	.driver_name	= cxacru_driver_name, | 
 | 	.bind		= cxacru_bind, | 
 | 	.heavy_init	= cxacru_heavy_init, | 
 | 	.unbind		= cxacru_unbind, | 
 | 	.atm_start	= cxacru_atm_start, | 
 | 	.bulk_in	= CXACRU_EP_DATA, | 
 | 	.bulk_out	= CXACRU_EP_DATA, | 
 | 	.rx_padding	= 3, | 
 | 	.tx_padding	= 11, | 
 | }; | 
 |  | 
 | static int cxacru_usb_probe(struct usb_interface *intf, | 
 | 		const struct usb_device_id *id) | 
 | { | 
 | 	struct usb_device *usb_dev = interface_to_usbdev(intf); | 
 | 	char buf[15]; | 
 |  | 
 | 	/* Avoid ADSL routers (cx82310_eth). | 
 | 	 * Abort if bDeviceClass is 0xff and iProduct is "USB NET CARD". | 
 | 	 */ | 
 | 	if (usb_dev->descriptor.bDeviceClass == USB_CLASS_VENDOR_SPEC | 
 | 			&& usb_string(usb_dev, usb_dev->descriptor.iProduct, | 
 | 				buf, sizeof(buf)) > 0) { | 
 | 		if (!strcmp(buf, "USB NET CARD")) { | 
 | 			dev_info(&intf->dev, "ignoring cx82310_eth device\n"); | 
 | 			return -ENODEV; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return usbatm_usb_probe(intf, id, &cxacru_driver); | 
 | } | 
 |  | 
 | static struct usb_driver cxacru_usb_driver = { | 
 | 	.name		= cxacru_driver_name, | 
 | 	.probe		= cxacru_usb_probe, | 
 | 	.disconnect	= usbatm_usb_disconnect, | 
 | 	.id_table	= cxacru_usb_ids, | 
 | 	.dev_groups	= cxacru_groups, | 
 | }; | 
 |  | 
 | module_usb_driver(cxacru_usb_driver); | 
 |  | 
 | MODULE_AUTHOR(DRIVER_AUTHOR); | 
 | MODULE_DESCRIPTION(DRIVER_DESC); | 
 | MODULE_LICENSE("GPL"); |