| // SPDX-License-Identifier: GPL-2.0-only | 
 | /* | 
 |  * VHT handling | 
 |  * | 
 |  * Portions of this file | 
 |  * Copyright(c) 2015 - 2016 Intel Deutschland GmbH | 
 |  * Copyright (C) 2018 - 2019 Intel Corporation | 
 |  */ | 
 |  | 
 | #include <linux/ieee80211.h> | 
 | #include <linux/export.h> | 
 | #include <net/mac80211.h> | 
 | #include "ieee80211_i.h" | 
 | #include "rate.h" | 
 |  | 
 |  | 
 | static void __check_vhtcap_disable(struct ieee80211_sub_if_data *sdata, | 
 | 				   struct ieee80211_sta_vht_cap *vht_cap, | 
 | 				   u32 flag) | 
 | { | 
 | 	__le32 le_flag = cpu_to_le32(flag); | 
 |  | 
 | 	if (sdata->u.mgd.vht_capa_mask.vht_cap_info & le_flag && | 
 | 	    !(sdata->u.mgd.vht_capa.vht_cap_info & le_flag)) | 
 | 		vht_cap->cap &= ~flag; | 
 | } | 
 |  | 
 | void ieee80211_apply_vhtcap_overrides(struct ieee80211_sub_if_data *sdata, | 
 | 				      struct ieee80211_sta_vht_cap *vht_cap) | 
 | { | 
 | 	int i; | 
 | 	u16 rxmcs_mask, rxmcs_cap, rxmcs_n, txmcs_mask, txmcs_cap, txmcs_n; | 
 |  | 
 | 	if (!vht_cap->vht_supported) | 
 | 		return; | 
 |  | 
 | 	if (sdata->vif.type != NL80211_IFTYPE_STATION) | 
 | 		return; | 
 |  | 
 | 	__check_vhtcap_disable(sdata, vht_cap, | 
 | 			       IEEE80211_VHT_CAP_RXLDPC); | 
 | 	__check_vhtcap_disable(sdata, vht_cap, | 
 | 			       IEEE80211_VHT_CAP_SHORT_GI_80); | 
 | 	__check_vhtcap_disable(sdata, vht_cap, | 
 | 			       IEEE80211_VHT_CAP_SHORT_GI_160); | 
 | 	__check_vhtcap_disable(sdata, vht_cap, | 
 | 			       IEEE80211_VHT_CAP_TXSTBC); | 
 | 	__check_vhtcap_disable(sdata, vht_cap, | 
 | 			       IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE); | 
 | 	__check_vhtcap_disable(sdata, vht_cap, | 
 | 			       IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE); | 
 | 	__check_vhtcap_disable(sdata, vht_cap, | 
 | 			       IEEE80211_VHT_CAP_RX_ANTENNA_PATTERN); | 
 | 	__check_vhtcap_disable(sdata, vht_cap, | 
 | 			       IEEE80211_VHT_CAP_TX_ANTENNA_PATTERN); | 
 |  | 
 | 	/* Allow user to decrease AMPDU length exponent */ | 
 | 	if (sdata->u.mgd.vht_capa_mask.vht_cap_info & | 
 | 	    cpu_to_le32(IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK)) { | 
 | 		u32 cap, n; | 
 |  | 
 | 		n = le32_to_cpu(sdata->u.mgd.vht_capa.vht_cap_info) & | 
 | 			IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK; | 
 | 		n >>= IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_SHIFT; | 
 | 		cap = vht_cap->cap & IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK; | 
 | 		cap >>= IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_SHIFT; | 
 |  | 
 | 		if (n < cap) { | 
 | 			vht_cap->cap &= | 
 | 				~IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK; | 
 | 			vht_cap->cap |= | 
 | 				n << IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_SHIFT; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* Allow the user to decrease MCSes */ | 
 | 	rxmcs_mask = | 
 | 		le16_to_cpu(sdata->u.mgd.vht_capa_mask.supp_mcs.rx_mcs_map); | 
 | 	rxmcs_n = le16_to_cpu(sdata->u.mgd.vht_capa.supp_mcs.rx_mcs_map); | 
 | 	rxmcs_n &= rxmcs_mask; | 
 | 	rxmcs_cap = le16_to_cpu(vht_cap->vht_mcs.rx_mcs_map); | 
 |  | 
 | 	txmcs_mask = | 
 | 		le16_to_cpu(sdata->u.mgd.vht_capa_mask.supp_mcs.tx_mcs_map); | 
 | 	txmcs_n = le16_to_cpu(sdata->u.mgd.vht_capa.supp_mcs.tx_mcs_map); | 
 | 	txmcs_n &= txmcs_mask; | 
 | 	txmcs_cap = le16_to_cpu(vht_cap->vht_mcs.tx_mcs_map); | 
 | 	for (i = 0; i < 8; i++) { | 
 | 		u8 m, n, c; | 
 |  | 
 | 		m = (rxmcs_mask >> 2*i) & IEEE80211_VHT_MCS_NOT_SUPPORTED; | 
 | 		n = (rxmcs_n >> 2*i) & IEEE80211_VHT_MCS_NOT_SUPPORTED; | 
 | 		c = (rxmcs_cap >> 2*i) & IEEE80211_VHT_MCS_NOT_SUPPORTED; | 
 |  | 
 | 		if (m && ((c != IEEE80211_VHT_MCS_NOT_SUPPORTED && n < c) || | 
 | 			  n == IEEE80211_VHT_MCS_NOT_SUPPORTED)) { | 
 | 			rxmcs_cap &= ~(3 << 2*i); | 
 | 			rxmcs_cap |= (rxmcs_n & (3 << 2*i)); | 
 | 		} | 
 |  | 
 | 		m = (txmcs_mask >> 2*i) & IEEE80211_VHT_MCS_NOT_SUPPORTED; | 
 | 		n = (txmcs_n >> 2*i) & IEEE80211_VHT_MCS_NOT_SUPPORTED; | 
 | 		c = (txmcs_cap >> 2*i) & IEEE80211_VHT_MCS_NOT_SUPPORTED; | 
 |  | 
 | 		if (m && ((c != IEEE80211_VHT_MCS_NOT_SUPPORTED && n < c) || | 
 | 			  n == IEEE80211_VHT_MCS_NOT_SUPPORTED)) { | 
 | 			txmcs_cap &= ~(3 << 2*i); | 
 | 			txmcs_cap |= (txmcs_n & (3 << 2*i)); | 
 | 		} | 
 | 	} | 
 | 	vht_cap->vht_mcs.rx_mcs_map = cpu_to_le16(rxmcs_cap); | 
 | 	vht_cap->vht_mcs.tx_mcs_map = cpu_to_le16(txmcs_cap); | 
 | } | 
 |  | 
 | void | 
 | ieee80211_vht_cap_ie_to_sta_vht_cap(struct ieee80211_sub_if_data *sdata, | 
 | 				    struct ieee80211_supported_band *sband, | 
 | 				    const struct ieee80211_vht_cap *vht_cap_ie, | 
 | 				    struct sta_info *sta) | 
 | { | 
 | 	struct ieee80211_sta_vht_cap *vht_cap = &sta->sta.vht_cap; | 
 | 	struct ieee80211_sta_vht_cap own_cap; | 
 | 	u32 cap_info, i; | 
 | 	bool have_80mhz; | 
 |  | 
 | 	memset(vht_cap, 0, sizeof(*vht_cap)); | 
 |  | 
 | 	if (!sta->sta.ht_cap.ht_supported) | 
 | 		return; | 
 |  | 
 | 	if (!vht_cap_ie || !sband->vht_cap.vht_supported) | 
 | 		return; | 
 |  | 
 | 	/* Allow VHT if at least one channel on the sband supports 80 MHz */ | 
 | 	have_80mhz = false; | 
 | 	for (i = 0; i < sband->n_channels; i++) { | 
 | 		if (sband->channels[i].flags & (IEEE80211_CHAN_DISABLED | | 
 | 						IEEE80211_CHAN_NO_80MHZ)) | 
 | 			continue; | 
 |  | 
 | 		have_80mhz = true; | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	if (!have_80mhz) | 
 | 		return; | 
 |  | 
 | 	/* | 
 | 	 * A VHT STA must support 40 MHz, but if we verify that here | 
 | 	 * then we break a few things - some APs (e.g. Netgear R6300v2 | 
 | 	 * and others based on the BCM4360 chipset) will unset this | 
 | 	 * capability bit when operating in 20 MHz. | 
 | 	 */ | 
 |  | 
 | 	vht_cap->vht_supported = true; | 
 |  | 
 | 	own_cap = sband->vht_cap; | 
 | 	/* | 
 | 	 * If user has specified capability overrides, take care | 
 | 	 * of that if the station we're setting up is the AP that | 
 | 	 * we advertised a restricted capability set to. Override | 
 | 	 * our own capabilities and then use those below. | 
 | 	 */ | 
 | 	if (sdata->vif.type == NL80211_IFTYPE_STATION && | 
 | 	    !test_sta_flag(sta, WLAN_STA_TDLS_PEER)) | 
 | 		ieee80211_apply_vhtcap_overrides(sdata, &own_cap); | 
 |  | 
 | 	/* take some capabilities as-is */ | 
 | 	cap_info = le32_to_cpu(vht_cap_ie->vht_cap_info); | 
 | 	vht_cap->cap = cap_info; | 
 | 	vht_cap->cap &= IEEE80211_VHT_CAP_RXLDPC | | 
 | 			IEEE80211_VHT_CAP_VHT_TXOP_PS | | 
 | 			IEEE80211_VHT_CAP_HTC_VHT | | 
 | 			IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK | | 
 | 			IEEE80211_VHT_CAP_VHT_LINK_ADAPTATION_VHT_UNSOL_MFB | | 
 | 			IEEE80211_VHT_CAP_VHT_LINK_ADAPTATION_VHT_MRQ_MFB | | 
 | 			IEEE80211_VHT_CAP_RX_ANTENNA_PATTERN | | 
 | 			IEEE80211_VHT_CAP_TX_ANTENNA_PATTERN; | 
 |  | 
 | 	vht_cap->cap |= min_t(u32, cap_info & IEEE80211_VHT_CAP_MAX_MPDU_MASK, | 
 | 			      own_cap.cap & IEEE80211_VHT_CAP_MAX_MPDU_MASK); | 
 |  | 
 | 	/* and some based on our own capabilities */ | 
 | 	switch (own_cap.cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK) { | 
 | 	case IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ: | 
 | 		vht_cap->cap |= cap_info & | 
 | 				IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ; | 
 | 		break; | 
 | 	case IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ: | 
 | 		vht_cap->cap |= cap_info & | 
 | 				IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK; | 
 | 		break; | 
 | 	default: | 
 | 		/* nothing */ | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	/* symmetric capabilities */ | 
 | 	vht_cap->cap |= cap_info & own_cap.cap & | 
 | 			(IEEE80211_VHT_CAP_SHORT_GI_80 | | 
 | 			 IEEE80211_VHT_CAP_SHORT_GI_160); | 
 |  | 
 | 	/* remaining ones */ | 
 | 	if (own_cap.cap & IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE) | 
 | 		vht_cap->cap |= cap_info & | 
 | 				(IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE | | 
 | 				 IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_MASK); | 
 |  | 
 | 	if (own_cap.cap & IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE) | 
 | 		vht_cap->cap |= cap_info & | 
 | 				(IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE | | 
 | 				 IEEE80211_VHT_CAP_BEAMFORMEE_STS_MASK); | 
 |  | 
 | 	if (own_cap.cap & IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE) | 
 | 		vht_cap->cap |= cap_info & | 
 | 				IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE; | 
 |  | 
 | 	if (own_cap.cap & IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE) | 
 | 		vht_cap->cap |= cap_info & | 
 | 				IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE; | 
 |  | 
 | 	if (own_cap.cap & IEEE80211_VHT_CAP_TXSTBC) | 
 | 		vht_cap->cap |= cap_info & IEEE80211_VHT_CAP_RXSTBC_MASK; | 
 |  | 
 | 	if (own_cap.cap & IEEE80211_VHT_CAP_RXSTBC_MASK) | 
 | 		vht_cap->cap |= cap_info & IEEE80211_VHT_CAP_TXSTBC; | 
 |  | 
 | 	/* Copy peer MCS info, the driver might need them. */ | 
 | 	memcpy(&vht_cap->vht_mcs, &vht_cap_ie->supp_mcs, | 
 | 	       sizeof(struct ieee80211_vht_mcs_info)); | 
 |  | 
 | 	/* copy EXT_NSS_BW Support value or remove the capability */ | 
 | 	if (ieee80211_hw_check(&sdata->local->hw, SUPPORTS_VHT_EXT_NSS_BW)) | 
 | 		vht_cap->cap |= (cap_info & IEEE80211_VHT_CAP_EXT_NSS_BW_MASK); | 
 | 	else | 
 | 		vht_cap->vht_mcs.tx_highest &= | 
 | 			~cpu_to_le16(IEEE80211_VHT_EXT_NSS_BW_CAPABLE); | 
 |  | 
 | 	/* but also restrict MCSes */ | 
 | 	for (i = 0; i < 8; i++) { | 
 | 		u16 own_rx, own_tx, peer_rx, peer_tx; | 
 |  | 
 | 		own_rx = le16_to_cpu(own_cap.vht_mcs.rx_mcs_map); | 
 | 		own_rx = (own_rx >> i * 2) & IEEE80211_VHT_MCS_NOT_SUPPORTED; | 
 |  | 
 | 		own_tx = le16_to_cpu(own_cap.vht_mcs.tx_mcs_map); | 
 | 		own_tx = (own_tx >> i * 2) & IEEE80211_VHT_MCS_NOT_SUPPORTED; | 
 |  | 
 | 		peer_rx = le16_to_cpu(vht_cap->vht_mcs.rx_mcs_map); | 
 | 		peer_rx = (peer_rx >> i * 2) & IEEE80211_VHT_MCS_NOT_SUPPORTED; | 
 |  | 
 | 		peer_tx = le16_to_cpu(vht_cap->vht_mcs.tx_mcs_map); | 
 | 		peer_tx = (peer_tx >> i * 2) & IEEE80211_VHT_MCS_NOT_SUPPORTED; | 
 |  | 
 | 		if (peer_tx != IEEE80211_VHT_MCS_NOT_SUPPORTED) { | 
 | 			if (own_rx == IEEE80211_VHT_MCS_NOT_SUPPORTED) | 
 | 				peer_tx = IEEE80211_VHT_MCS_NOT_SUPPORTED; | 
 | 			else if (own_rx < peer_tx) | 
 | 				peer_tx = own_rx; | 
 | 		} | 
 |  | 
 | 		if (peer_rx != IEEE80211_VHT_MCS_NOT_SUPPORTED) { | 
 | 			if (own_tx == IEEE80211_VHT_MCS_NOT_SUPPORTED) | 
 | 				peer_rx = IEEE80211_VHT_MCS_NOT_SUPPORTED; | 
 | 			else if (own_tx < peer_rx) | 
 | 				peer_rx = own_tx; | 
 | 		} | 
 |  | 
 | 		vht_cap->vht_mcs.rx_mcs_map &= | 
 | 			~cpu_to_le16(IEEE80211_VHT_MCS_NOT_SUPPORTED << i * 2); | 
 | 		vht_cap->vht_mcs.rx_mcs_map |= cpu_to_le16(peer_rx << i * 2); | 
 |  | 
 | 		vht_cap->vht_mcs.tx_mcs_map &= | 
 | 			~cpu_to_le16(IEEE80211_VHT_MCS_NOT_SUPPORTED << i * 2); | 
 | 		vht_cap->vht_mcs.tx_mcs_map |= cpu_to_le16(peer_tx << i * 2); | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * This is a workaround for VHT-enabled STAs which break the spec | 
 | 	 * and have the VHT-MCS Rx map filled in with value 3 for all eight | 
 | 	 * spacial streams, an example is AR9462. | 
 | 	 * | 
 | 	 * As per spec, in section 22.1.1 Introduction to the VHT PHY | 
 | 	 * A VHT STA shall support at least single spactial stream VHT-MCSs | 
 | 	 * 0 to 7 (transmit and receive) in all supported channel widths. | 
 | 	 */ | 
 | 	if (vht_cap->vht_mcs.rx_mcs_map == cpu_to_le16(0xFFFF)) { | 
 | 		vht_cap->vht_supported = false; | 
 | 		sdata_info(sdata, "Ignoring VHT IE from %pM due to invalid rx_mcs_map\n", | 
 | 			   sta->addr); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	/* finally set up the bandwidth */ | 
 | 	switch (vht_cap->cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK) { | 
 | 	case IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ: | 
 | 	case IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ: | 
 | 		sta->cur_max_bandwidth = IEEE80211_STA_RX_BW_160; | 
 | 		break; | 
 | 	default: | 
 | 		sta->cur_max_bandwidth = IEEE80211_STA_RX_BW_80; | 
 |  | 
 | 		if (!(vht_cap->vht_mcs.tx_highest & | 
 | 				cpu_to_le16(IEEE80211_VHT_EXT_NSS_BW_CAPABLE))) | 
 | 			break; | 
 |  | 
 | 		/* | 
 | 		 * If this is non-zero, then it does support 160 MHz after all, | 
 | 		 * in one form or the other. We don't distinguish here (or even | 
 | 		 * above) between 160 and 80+80 yet. | 
 | 		 */ | 
 | 		if (cap_info & IEEE80211_VHT_CAP_EXT_NSS_BW_MASK) | 
 | 			sta->cur_max_bandwidth = IEEE80211_STA_RX_BW_160; | 
 | 	} | 
 |  | 
 | 	sta->sta.bandwidth = ieee80211_sta_cur_vht_bw(sta); | 
 |  | 
 | 	/* If HT IE reported 3839 bytes only, stay with that size. */ | 
 | 	if (sta->sta.max_amsdu_len == IEEE80211_MAX_MPDU_LEN_HT_3839) | 
 | 		return; | 
 |  | 
 | 	switch (vht_cap->cap & IEEE80211_VHT_CAP_MAX_MPDU_MASK) { | 
 | 	case IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_11454: | 
 | 		sta->sta.max_amsdu_len = IEEE80211_MAX_MPDU_LEN_VHT_11454; | 
 | 		break; | 
 | 	case IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_7991: | 
 | 		sta->sta.max_amsdu_len = IEEE80211_MAX_MPDU_LEN_VHT_7991; | 
 | 		break; | 
 | 	case IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_3895: | 
 | 	default: | 
 | 		sta->sta.max_amsdu_len = IEEE80211_MAX_MPDU_LEN_VHT_3895; | 
 | 		break; | 
 | 	} | 
 | } | 
 |  | 
 | enum ieee80211_sta_rx_bandwidth ieee80211_sta_cap_rx_bw(struct sta_info *sta) | 
 | { | 
 | 	struct ieee80211_sta_vht_cap *vht_cap = &sta->sta.vht_cap; | 
 | 	u32 cap_width; | 
 |  | 
 | 	if (!vht_cap->vht_supported) | 
 | 		return sta->sta.ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 ? | 
 | 				IEEE80211_STA_RX_BW_40 : | 
 | 				IEEE80211_STA_RX_BW_20; | 
 |  | 
 | 	cap_width = vht_cap->cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK; | 
 |  | 
 | 	if (cap_width == IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ || | 
 | 	    cap_width == IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ) | 
 | 		return IEEE80211_STA_RX_BW_160; | 
 |  | 
 | 	/* | 
 | 	 * If this is non-zero, then it does support 160 MHz after all, | 
 | 	 * in one form or the other. We don't distinguish here (or even | 
 | 	 * above) between 160 and 80+80 yet. | 
 | 	 */ | 
 | 	if (vht_cap->cap & IEEE80211_VHT_CAP_EXT_NSS_BW_MASK) | 
 | 		return IEEE80211_STA_RX_BW_160; | 
 |  | 
 | 	return IEEE80211_STA_RX_BW_80; | 
 | } | 
 |  | 
 | enum nl80211_chan_width ieee80211_sta_cap_chan_bw(struct sta_info *sta) | 
 | { | 
 | 	struct ieee80211_sta_vht_cap *vht_cap = &sta->sta.vht_cap; | 
 | 	u32 cap_width; | 
 |  | 
 | 	if (!vht_cap->vht_supported) { | 
 | 		if (!sta->sta.ht_cap.ht_supported) | 
 | 			return NL80211_CHAN_WIDTH_20_NOHT; | 
 |  | 
 | 		return sta->sta.ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 ? | 
 | 				NL80211_CHAN_WIDTH_40 : NL80211_CHAN_WIDTH_20; | 
 | 	} | 
 |  | 
 | 	cap_width = vht_cap->cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK; | 
 |  | 
 | 	if (cap_width == IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ) | 
 | 		return NL80211_CHAN_WIDTH_160; | 
 | 	else if (cap_width == IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ) | 
 | 		return NL80211_CHAN_WIDTH_80P80; | 
 |  | 
 | 	return NL80211_CHAN_WIDTH_80; | 
 | } | 
 |  | 
 | enum nl80211_chan_width | 
 | ieee80211_sta_rx_bw_to_chan_width(struct sta_info *sta) | 
 | { | 
 | 	enum ieee80211_sta_rx_bandwidth cur_bw = sta->sta.bandwidth; | 
 | 	struct ieee80211_sta_vht_cap *vht_cap = &sta->sta.vht_cap; | 
 | 	u32 cap_width; | 
 |  | 
 | 	switch (cur_bw) { | 
 | 	case IEEE80211_STA_RX_BW_20: | 
 | 		if (!sta->sta.ht_cap.ht_supported) | 
 | 			return NL80211_CHAN_WIDTH_20_NOHT; | 
 | 		else | 
 | 			return NL80211_CHAN_WIDTH_20; | 
 | 	case IEEE80211_STA_RX_BW_40: | 
 | 		return NL80211_CHAN_WIDTH_40; | 
 | 	case IEEE80211_STA_RX_BW_80: | 
 | 		return NL80211_CHAN_WIDTH_80; | 
 | 	case IEEE80211_STA_RX_BW_160: | 
 | 		cap_width = | 
 | 			vht_cap->cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK; | 
 |  | 
 | 		if (cap_width == IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ) | 
 | 			return NL80211_CHAN_WIDTH_160; | 
 |  | 
 | 		return NL80211_CHAN_WIDTH_80P80; | 
 | 	default: | 
 | 		return NL80211_CHAN_WIDTH_20; | 
 | 	} | 
 | } | 
 |  | 
 | enum ieee80211_sta_rx_bandwidth | 
 | ieee80211_chan_width_to_rx_bw(enum nl80211_chan_width width) | 
 | { | 
 | 	switch (width) { | 
 | 	case NL80211_CHAN_WIDTH_20_NOHT: | 
 | 	case NL80211_CHAN_WIDTH_20: | 
 | 		return IEEE80211_STA_RX_BW_20; | 
 | 	case NL80211_CHAN_WIDTH_40: | 
 | 		return IEEE80211_STA_RX_BW_40; | 
 | 	case NL80211_CHAN_WIDTH_80: | 
 | 		return IEEE80211_STA_RX_BW_80; | 
 | 	case NL80211_CHAN_WIDTH_160: | 
 | 	case NL80211_CHAN_WIDTH_80P80: | 
 | 		return IEEE80211_STA_RX_BW_160; | 
 | 	default: | 
 | 		WARN_ON_ONCE(1); | 
 | 		return IEEE80211_STA_RX_BW_20; | 
 | 	} | 
 | } | 
 |  | 
 | enum ieee80211_sta_rx_bandwidth ieee80211_sta_cur_vht_bw(struct sta_info *sta) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata = sta->sdata; | 
 | 	enum ieee80211_sta_rx_bandwidth bw; | 
 | 	enum nl80211_chan_width bss_width = sdata->vif.bss_conf.chandef.width; | 
 |  | 
 | 	bw = ieee80211_sta_cap_rx_bw(sta); | 
 | 	bw = min(bw, sta->cur_max_bandwidth); | 
 |  | 
 | 	/* Don't consider AP's bandwidth for TDLS peers, section 11.23.1 of | 
 | 	 * IEEE80211-2016 specification makes higher bandwidth operation | 
 | 	 * possible on the TDLS link if the peers have wider bandwidth | 
 | 	 * capability. | 
 | 	 * | 
 | 	 * However, in this case, and only if the TDLS peer is authorized, | 
 | 	 * limit to the tdls_chandef so that the configuration here isn't | 
 | 	 * wider than what's actually requested on the channel context. | 
 | 	 */ | 
 | 	if (test_sta_flag(sta, WLAN_STA_TDLS_PEER) && | 
 | 	    test_sta_flag(sta, WLAN_STA_TDLS_WIDER_BW) && | 
 | 	    test_sta_flag(sta, WLAN_STA_AUTHORIZED) && | 
 | 	    sta->tdls_chandef.chan) | 
 | 		bw = min(bw, ieee80211_chan_width_to_rx_bw(sta->tdls_chandef.width)); | 
 | 	else | 
 | 		bw = min(bw, ieee80211_chan_width_to_rx_bw(bss_width)); | 
 |  | 
 | 	return bw; | 
 | } | 
 |  | 
 | void ieee80211_sta_set_rx_nss(struct sta_info *sta) | 
 | { | 
 | 	u8 ht_rx_nss = 0, vht_rx_nss = 0; | 
 |  | 
 | 	/* if we received a notification already don't overwrite it */ | 
 | 	if (sta->sta.rx_nss) | 
 | 		return; | 
 |  | 
 | 	if (sta->sta.ht_cap.ht_supported) { | 
 | 		if (sta->sta.ht_cap.mcs.rx_mask[0]) | 
 | 			ht_rx_nss++; | 
 | 		if (sta->sta.ht_cap.mcs.rx_mask[1]) | 
 | 			ht_rx_nss++; | 
 | 		if (sta->sta.ht_cap.mcs.rx_mask[2]) | 
 | 			ht_rx_nss++; | 
 | 		if (sta->sta.ht_cap.mcs.rx_mask[3]) | 
 | 			ht_rx_nss++; | 
 | 		/* FIXME: consider rx_highest? */ | 
 | 	} | 
 |  | 
 | 	if (sta->sta.vht_cap.vht_supported) { | 
 | 		int i; | 
 | 		u16 rx_mcs_map; | 
 |  | 
 | 		rx_mcs_map = le16_to_cpu(sta->sta.vht_cap.vht_mcs.rx_mcs_map); | 
 |  | 
 | 		for (i = 7; i >= 0; i--) { | 
 | 			u8 mcs = (rx_mcs_map >> (2 * i)) & 3; | 
 |  | 
 | 			if (mcs != IEEE80211_VHT_MCS_NOT_SUPPORTED) { | 
 | 				vht_rx_nss = i + 1; | 
 | 				break; | 
 | 			} | 
 | 		} | 
 | 		/* FIXME: consider rx_highest? */ | 
 | 	} | 
 |  | 
 | 	ht_rx_nss = max(ht_rx_nss, vht_rx_nss); | 
 | 	sta->sta.rx_nss = max_t(u8, 1, ht_rx_nss); | 
 | } | 
 |  | 
 | u32 __ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata, | 
 | 				  struct sta_info *sta, u8 opmode, | 
 | 				  enum nl80211_band band) | 
 | { | 
 | 	enum ieee80211_sta_rx_bandwidth new_bw; | 
 | 	struct sta_opmode_info sta_opmode = {}; | 
 | 	u32 changed = 0; | 
 | 	u8 nss; | 
 |  | 
 | 	/* ignore - no support for BF yet */ | 
 | 	if (opmode & IEEE80211_OPMODE_NOTIF_RX_NSS_TYPE_BF) | 
 | 		return 0; | 
 |  | 
 | 	nss = opmode & IEEE80211_OPMODE_NOTIF_RX_NSS_MASK; | 
 | 	nss >>= IEEE80211_OPMODE_NOTIF_RX_NSS_SHIFT; | 
 | 	nss += 1; | 
 |  | 
 | 	if (sta->sta.rx_nss != nss) { | 
 | 		sta->sta.rx_nss = nss; | 
 | 		sta_opmode.rx_nss = nss; | 
 | 		changed |= IEEE80211_RC_NSS_CHANGED; | 
 | 		sta_opmode.changed |= STA_OPMODE_N_SS_CHANGED; | 
 | 	} | 
 |  | 
 | 	switch (opmode & IEEE80211_OPMODE_NOTIF_CHANWIDTH_MASK) { | 
 | 	case IEEE80211_OPMODE_NOTIF_CHANWIDTH_20MHZ: | 
 | 		sta->cur_max_bandwidth = IEEE80211_STA_RX_BW_20; | 
 | 		break; | 
 | 	case IEEE80211_OPMODE_NOTIF_CHANWIDTH_40MHZ: | 
 | 		sta->cur_max_bandwidth = IEEE80211_STA_RX_BW_40; | 
 | 		break; | 
 | 	case IEEE80211_OPMODE_NOTIF_CHANWIDTH_80MHZ: | 
 | 		sta->cur_max_bandwidth = IEEE80211_STA_RX_BW_80; | 
 | 		break; | 
 | 	case IEEE80211_OPMODE_NOTIF_CHANWIDTH_160MHZ: | 
 | 		sta->cur_max_bandwidth = IEEE80211_STA_RX_BW_160; | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	new_bw = ieee80211_sta_cur_vht_bw(sta); | 
 | 	if (new_bw != sta->sta.bandwidth) { | 
 | 		sta->sta.bandwidth = new_bw; | 
 | 		sta_opmode.bw = ieee80211_sta_rx_bw_to_chan_width(sta); | 
 | 		changed |= IEEE80211_RC_BW_CHANGED; | 
 | 		sta_opmode.changed |= STA_OPMODE_MAX_BW_CHANGED; | 
 | 	} | 
 |  | 
 | 	if (sta_opmode.changed) | 
 | 		cfg80211_sta_opmode_change_notify(sdata->dev, sta->addr, | 
 | 						  &sta_opmode, GFP_KERNEL); | 
 |  | 
 | 	return changed; | 
 | } | 
 |  | 
 | void ieee80211_process_mu_groups(struct ieee80211_sub_if_data *sdata, | 
 | 				 struct ieee80211_mgmt *mgmt) | 
 | { | 
 | 	struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf; | 
 |  | 
 | 	if (!sdata->vif.mu_mimo_owner) | 
 | 		return; | 
 |  | 
 | 	if (!memcmp(mgmt->u.action.u.vht_group_notif.position, | 
 | 		    bss_conf->mu_group.position, WLAN_USER_POSITION_LEN) && | 
 | 	    !memcmp(mgmt->u.action.u.vht_group_notif.membership, | 
 | 		    bss_conf->mu_group.membership, WLAN_MEMBERSHIP_LEN)) | 
 | 		return; | 
 |  | 
 | 	memcpy(bss_conf->mu_group.membership, | 
 | 	       mgmt->u.action.u.vht_group_notif.membership, | 
 | 	       WLAN_MEMBERSHIP_LEN); | 
 | 	memcpy(bss_conf->mu_group.position, | 
 | 	       mgmt->u.action.u.vht_group_notif.position, | 
 | 	       WLAN_USER_POSITION_LEN); | 
 |  | 
 | 	ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_MU_GROUPS); | 
 | } | 
 |  | 
 | void ieee80211_update_mu_groups(struct ieee80211_vif *vif, | 
 | 				const u8 *membership, const u8 *position) | 
 | { | 
 | 	struct ieee80211_bss_conf *bss_conf = &vif->bss_conf; | 
 |  | 
 | 	if (WARN_ON_ONCE(!vif->mu_mimo_owner)) | 
 | 		return; | 
 |  | 
 | 	memcpy(bss_conf->mu_group.membership, membership, WLAN_MEMBERSHIP_LEN); | 
 | 	memcpy(bss_conf->mu_group.position, position, WLAN_USER_POSITION_LEN); | 
 | } | 
 | EXPORT_SYMBOL_GPL(ieee80211_update_mu_groups); | 
 |  | 
 | void ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata, | 
 | 				 struct sta_info *sta, u8 opmode, | 
 | 				 enum nl80211_band band) | 
 | { | 
 | 	struct ieee80211_local *local = sdata->local; | 
 | 	struct ieee80211_supported_band *sband = local->hw.wiphy->bands[band]; | 
 |  | 
 | 	u32 changed = __ieee80211_vht_handle_opmode(sdata, sta, opmode, band); | 
 |  | 
 | 	if (changed > 0) { | 
 | 		ieee80211_recalc_min_chandef(sdata); | 
 | 		rate_control_rate_update(local, sband, sta, changed); | 
 | 	} | 
 | } | 
 |  | 
 | void ieee80211_get_vht_mask_from_cap(__le16 vht_cap, | 
 | 				     u16 vht_mask[NL80211_VHT_NSS_MAX]) | 
 | { | 
 | 	int i; | 
 | 	u16 mask, cap = le16_to_cpu(vht_cap); | 
 |  | 
 | 	for (i = 0; i < NL80211_VHT_NSS_MAX; i++) { | 
 | 		mask = (cap >> i * 2) & IEEE80211_VHT_MCS_NOT_SUPPORTED; | 
 | 		switch (mask) { | 
 | 		case IEEE80211_VHT_MCS_SUPPORT_0_7: | 
 | 			vht_mask[i] = 0x00FF; | 
 | 			break; | 
 | 		case IEEE80211_VHT_MCS_SUPPORT_0_8: | 
 | 			vht_mask[i] = 0x01FF; | 
 | 			break; | 
 | 		case IEEE80211_VHT_MCS_SUPPORT_0_9: | 
 | 			vht_mask[i] = 0x03FF; | 
 | 			break; | 
 | 		case IEEE80211_VHT_MCS_NOT_SUPPORTED: | 
 | 		default: | 
 | 			vht_mask[i] = 0; | 
 | 			break; | 
 | 		} | 
 | 	} | 
 | } |