| // SPDX-License-Identifier: GPL-2.0 | 
 | /* | 
 |  * cfg80211 scan result handling | 
 |  * | 
 |  * Copyright 2008 Johannes Berg <johannes@sipsolutions.net> | 
 |  * Copyright 2013-2014  Intel Mobile Communications GmbH | 
 |  * Copyright 2016	Intel Deutschland GmbH | 
 |  * Copyright (C) 2018-2019 Intel Corporation | 
 |  */ | 
 | #include <linux/kernel.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/module.h> | 
 | #include <linux/netdevice.h> | 
 | #include <linux/wireless.h> | 
 | #include <linux/nl80211.h> | 
 | #include <linux/etherdevice.h> | 
 | #include <net/arp.h> | 
 | #include <net/cfg80211.h> | 
 | #include <net/cfg80211-wext.h> | 
 | #include <net/iw_handler.h> | 
 | #include "core.h" | 
 | #include "nl80211.h" | 
 | #include "wext-compat.h" | 
 | #include "rdev-ops.h" | 
 |  | 
 | /** | 
 |  * DOC: BSS tree/list structure | 
 |  * | 
 |  * At the top level, the BSS list is kept in both a list in each | 
 |  * registered device (@bss_list) as well as an RB-tree for faster | 
 |  * lookup. In the RB-tree, entries can be looked up using their | 
 |  * channel, MESHID, MESHCONF (for MBSSes) or channel, BSSID, SSID | 
 |  * for other BSSes. | 
 |  * | 
 |  * Due to the possibility of hidden SSIDs, there's a second level | 
 |  * structure, the "hidden_list" and "hidden_beacon_bss" pointer. | 
 |  * The hidden_list connects all BSSes belonging to a single AP | 
 |  * that has a hidden SSID, and connects beacon and probe response | 
 |  * entries. For a probe response entry for a hidden SSID, the | 
 |  * hidden_beacon_bss pointer points to the BSS struct holding the | 
 |  * beacon's information. | 
 |  * | 
 |  * Reference counting is done for all these references except for | 
 |  * the hidden_list, so that a beacon BSS struct that is otherwise | 
 |  * not referenced has one reference for being on the bss_list and | 
 |  * one for each probe response entry that points to it using the | 
 |  * hidden_beacon_bss pointer. When a BSS struct that has such a | 
 |  * pointer is get/put, the refcount update is also propagated to | 
 |  * the referenced struct, this ensure that it cannot get removed | 
 |  * while somebody is using the probe response version. | 
 |  * | 
 |  * Note that the hidden_beacon_bss pointer never changes, due to | 
 |  * the reference counting. Therefore, no locking is needed for | 
 |  * it. | 
 |  * | 
 |  * Also note that the hidden_beacon_bss pointer is only relevant | 
 |  * if the driver uses something other than the IEs, e.g. private | 
 |  * data stored stored in the BSS struct, since the beacon IEs are | 
 |  * also linked into the probe response struct. | 
 |  */ | 
 |  | 
 | /* | 
 |  * Limit the number of BSS entries stored in mac80211. Each one is | 
 |  * a bit over 4k at most, so this limits to roughly 4-5M of memory. | 
 |  * If somebody wants to really attack this though, they'd likely | 
 |  * use small beacons, and only one type of frame, limiting each of | 
 |  * the entries to a much smaller size (in order to generate more | 
 |  * entries in total, so overhead is bigger.) | 
 |  */ | 
 | static int bss_entries_limit = 1000; | 
 | module_param(bss_entries_limit, int, 0644); | 
 | MODULE_PARM_DESC(bss_entries_limit, | 
 |                  "limit to number of scan BSS entries (per wiphy, default 1000)"); | 
 |  | 
 | #define IEEE80211_SCAN_RESULT_EXPIRE	(30 * HZ) | 
 |  | 
 | static void bss_free(struct cfg80211_internal_bss *bss) | 
 | { | 
 | 	struct cfg80211_bss_ies *ies; | 
 |  | 
 | 	if (WARN_ON(atomic_read(&bss->hold))) | 
 | 		return; | 
 |  | 
 | 	ies = (void *)rcu_access_pointer(bss->pub.beacon_ies); | 
 | 	if (ies && !bss->pub.hidden_beacon_bss) | 
 | 		kfree_rcu(ies, rcu_head); | 
 | 	ies = (void *)rcu_access_pointer(bss->pub.proberesp_ies); | 
 | 	if (ies) | 
 | 		kfree_rcu(ies, rcu_head); | 
 |  | 
 | 	/* | 
 | 	 * This happens when the module is removed, it doesn't | 
 | 	 * really matter any more save for completeness | 
 | 	 */ | 
 | 	if (!list_empty(&bss->hidden_list)) | 
 | 		list_del(&bss->hidden_list); | 
 |  | 
 | 	kfree(bss); | 
 | } | 
 |  | 
 | static inline void bss_ref_get(struct cfg80211_registered_device *rdev, | 
 | 			       struct cfg80211_internal_bss *bss) | 
 | { | 
 | 	lockdep_assert_held(&rdev->bss_lock); | 
 |  | 
 | 	bss->refcount++; | 
 |  | 
 | 	if (bss->pub.hidden_beacon_bss) | 
 | 		bss_from_pub(bss->pub.hidden_beacon_bss)->refcount++; | 
 |  | 
 | 	if (bss->pub.transmitted_bss) | 
 | 		bss_from_pub(bss->pub.transmitted_bss)->refcount++; | 
 | } | 
 |  | 
 | static inline void bss_ref_put(struct cfg80211_registered_device *rdev, | 
 | 			       struct cfg80211_internal_bss *bss) | 
 | { | 
 | 	lockdep_assert_held(&rdev->bss_lock); | 
 |  | 
 | 	if (bss->pub.hidden_beacon_bss) { | 
 | 		struct cfg80211_internal_bss *hbss; | 
 | 		hbss = container_of(bss->pub.hidden_beacon_bss, | 
 | 				    struct cfg80211_internal_bss, | 
 | 				    pub); | 
 | 		hbss->refcount--; | 
 | 		if (hbss->refcount == 0) | 
 | 			bss_free(hbss); | 
 | 	} | 
 |  | 
 | 	if (bss->pub.transmitted_bss) { | 
 | 		struct cfg80211_internal_bss *tbss; | 
 |  | 
 | 		tbss = container_of(bss->pub.transmitted_bss, | 
 | 				    struct cfg80211_internal_bss, | 
 | 				    pub); | 
 | 		tbss->refcount--; | 
 | 		if (tbss->refcount == 0) | 
 | 			bss_free(tbss); | 
 | 	} | 
 |  | 
 | 	bss->refcount--; | 
 | 	if (bss->refcount == 0) | 
 | 		bss_free(bss); | 
 | } | 
 |  | 
 | static bool __cfg80211_unlink_bss(struct cfg80211_registered_device *rdev, | 
 | 				  struct cfg80211_internal_bss *bss) | 
 | { | 
 | 	lockdep_assert_held(&rdev->bss_lock); | 
 |  | 
 | 	if (!list_empty(&bss->hidden_list)) { | 
 | 		/* | 
 | 		 * don't remove the beacon entry if it has | 
 | 		 * probe responses associated with it | 
 | 		 */ | 
 | 		if (!bss->pub.hidden_beacon_bss) | 
 | 			return false; | 
 | 		/* | 
 | 		 * if it's a probe response entry break its | 
 | 		 * link to the other entries in the group | 
 | 		 */ | 
 | 		list_del_init(&bss->hidden_list); | 
 | 	} | 
 |  | 
 | 	list_del_init(&bss->list); | 
 | 	list_del_init(&bss->pub.nontrans_list); | 
 | 	rb_erase(&bss->rbn, &rdev->bss_tree); | 
 | 	rdev->bss_entries--; | 
 | 	WARN_ONCE((rdev->bss_entries == 0) ^ list_empty(&rdev->bss_list), | 
 | 		  "rdev bss entries[%d]/list[empty:%d] corruption\n", | 
 | 		  rdev->bss_entries, list_empty(&rdev->bss_list)); | 
 | 	bss_ref_put(rdev, bss); | 
 | 	return true; | 
 | } | 
 |  | 
 | bool cfg80211_is_element_inherited(const struct element *elem, | 
 | 				   const struct element *non_inherit_elem) | 
 | { | 
 | 	u8 id_len, ext_id_len, i, loop_len, id; | 
 | 	const u8 *list; | 
 |  | 
 | 	if (elem->id == WLAN_EID_MULTIPLE_BSSID) | 
 | 		return false; | 
 |  | 
 | 	if (!non_inherit_elem || non_inherit_elem->datalen < 2) | 
 | 		return true; | 
 |  | 
 | 	/* | 
 | 	 * non inheritance element format is: | 
 | 	 * ext ID (56) | IDs list len | list | extension IDs list len | list | 
 | 	 * Both lists are optional. Both lengths are mandatory. | 
 | 	 * This means valid length is: | 
 | 	 * elem_len = 1 (extension ID) + 2 (list len fields) + list lengths | 
 | 	 */ | 
 | 	id_len = non_inherit_elem->data[1]; | 
 | 	if (non_inherit_elem->datalen < 3 + id_len) | 
 | 		return true; | 
 |  | 
 | 	ext_id_len = non_inherit_elem->data[2 + id_len]; | 
 | 	if (non_inherit_elem->datalen < 3 + id_len + ext_id_len) | 
 | 		return true; | 
 |  | 
 | 	if (elem->id == WLAN_EID_EXTENSION) { | 
 | 		if (!ext_id_len) | 
 | 			return true; | 
 | 		loop_len = ext_id_len; | 
 | 		list = &non_inherit_elem->data[3 + id_len]; | 
 | 		id = elem->data[0]; | 
 | 	} else { | 
 | 		if (!id_len) | 
 | 			return true; | 
 | 		loop_len = id_len; | 
 | 		list = &non_inherit_elem->data[2]; | 
 | 		id = elem->id; | 
 | 	} | 
 |  | 
 | 	for (i = 0; i < loop_len; i++) { | 
 | 		if (list[i] == id) | 
 | 			return false; | 
 | 	} | 
 |  | 
 | 	return true; | 
 | } | 
 | EXPORT_SYMBOL(cfg80211_is_element_inherited); | 
 |  | 
 | static size_t cfg80211_copy_elem_with_frags(const struct element *elem, | 
 | 					    const u8 *ie, size_t ie_len, | 
 | 					    u8 **pos, u8 *buf, size_t buf_len) | 
 | { | 
 | 	if (WARN_ON((u8 *)elem < ie || elem->data > ie + ie_len || | 
 | 		    elem->data + elem->datalen > ie + ie_len)) | 
 | 		return 0; | 
 |  | 
 | 	if (elem->datalen + 2 > buf + buf_len - *pos) | 
 | 		return 0; | 
 |  | 
 | 	memcpy(*pos, elem, elem->datalen + 2); | 
 | 	*pos += elem->datalen + 2; | 
 |  | 
 | 	/* Finish if it is not fragmented  */ | 
 | 	if (elem->datalen != 255) | 
 | 		return *pos - buf; | 
 |  | 
 | 	ie_len = ie + ie_len - elem->data - elem->datalen; | 
 | 	ie = (const u8 *)elem->data + elem->datalen; | 
 |  | 
 | 	for_each_element(elem, ie, ie_len) { | 
 | 		if (elem->id != WLAN_EID_FRAGMENT) | 
 | 			break; | 
 |  | 
 | 		if (elem->datalen + 2 > buf + buf_len - *pos) | 
 | 			return 0; | 
 |  | 
 | 		memcpy(*pos, elem, elem->datalen + 2); | 
 | 		*pos += elem->datalen + 2; | 
 |  | 
 | 		if (elem->datalen != 255) | 
 | 			break; | 
 | 	} | 
 |  | 
 | 	return *pos - buf; | 
 | } | 
 |  | 
 | static size_t cfg80211_gen_new_ie(const u8 *ie, size_t ielen, | 
 | 				  const u8 *subie, size_t subie_len, | 
 | 				  u8 *new_ie, size_t new_ie_len) | 
 | { | 
 | 	const struct element *non_inherit_elem, *parent, *sub; | 
 | 	u8 *pos = new_ie; | 
 | 	u8 id, ext_id; | 
 | 	unsigned int match_len; | 
 |  | 
 | 	non_inherit_elem = cfg80211_find_ext_elem(WLAN_EID_EXT_NON_INHERITANCE, | 
 | 						  subie, subie_len); | 
 |  | 
 | 	/* We copy the elements one by one from the parent to the generated | 
 | 	 * elements. | 
 | 	 * If they are not inherited (included in subie or in the non | 
 | 	 * inheritance element), then we copy all occurrences the first time | 
 | 	 * we see this element type. | 
 | 	 */ | 
 | 	for_each_element(parent, ie, ielen) { | 
 | 		if (parent->id == WLAN_EID_FRAGMENT) | 
 | 			continue; | 
 |  | 
 | 		if (parent->id == WLAN_EID_EXTENSION) { | 
 | 			if (parent->datalen < 1) | 
 | 				continue; | 
 |  | 
 | 			id = WLAN_EID_EXTENSION; | 
 | 			ext_id = parent->data[0]; | 
 | 			match_len = 1; | 
 | 		} else { | 
 | 			id = parent->id; | 
 | 			match_len = 0; | 
 | 		} | 
 |  | 
 | 		/* Find first occurrence in subie */ | 
 | 		sub = cfg80211_find_elem_match(id, subie, subie_len, | 
 | 					       &ext_id, match_len, 0); | 
 |  | 
 | 		/* Copy from parent if not in subie and inherited */ | 
 | 		if (!sub && | 
 | 		    cfg80211_is_element_inherited(parent, non_inherit_elem)) { | 
 | 			if (!cfg80211_copy_elem_with_frags(parent, | 
 | 							   ie, ielen, | 
 | 							   &pos, new_ie, | 
 | 							   new_ie_len)) | 
 | 				return 0; | 
 |  | 
 | 			continue; | 
 | 		} | 
 |  | 
 | 		/* Already copied if an earlier element had the same type */ | 
 | 		if (cfg80211_find_elem_match(id, ie, (u8 *)parent - ie, | 
 | 					     &ext_id, match_len, 0)) | 
 | 			continue; | 
 |  | 
 | 		/* Not inheriting, copy all similar elements from subie */ | 
 | 		while (sub) { | 
 | 			if (!cfg80211_copy_elem_with_frags(sub, | 
 | 							   subie, subie_len, | 
 | 							   &pos, new_ie, | 
 | 							   new_ie_len)) | 
 | 				return 0; | 
 |  | 
 | 			sub = cfg80211_find_elem_match(id, | 
 | 						       sub->data + sub->datalen, | 
 | 						       subie_len + subie - | 
 | 						       (sub->data + | 
 | 							sub->datalen), | 
 | 						       &ext_id, match_len, 0); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* The above misses elements that are included in subie but not in the | 
 | 	 * parent, so do a pass over subie and append those. | 
 | 	 * Skip the non-tx BSSID caps and non-inheritance element. | 
 | 	 */ | 
 | 	for_each_element(sub, subie, subie_len) { | 
 | 		if (sub->id == WLAN_EID_NON_TX_BSSID_CAP) | 
 | 			continue; | 
 |  | 
 | 		if (sub->id == WLAN_EID_FRAGMENT) | 
 | 			continue; | 
 |  | 
 | 		if (sub->id == WLAN_EID_EXTENSION) { | 
 | 			if (sub->datalen < 1) | 
 | 				continue; | 
 |  | 
 | 			id = WLAN_EID_EXTENSION; | 
 | 			ext_id = sub->data[0]; | 
 | 			match_len = 1; | 
 |  | 
 | 			if (ext_id == WLAN_EID_EXT_NON_INHERITANCE) | 
 | 				continue; | 
 | 		} else { | 
 | 			id = sub->id; | 
 | 			match_len = 0; | 
 | 		} | 
 |  | 
 | 		/* Processed if one was included in the parent */ | 
 | 		if (cfg80211_find_elem_match(id, ie, ielen, | 
 | 					     &ext_id, match_len, 0)) | 
 | 			continue; | 
 |  | 
 | 		if (!cfg80211_copy_elem_with_frags(sub, subie, subie_len, | 
 | 						   &pos, new_ie, new_ie_len)) | 
 | 			return 0; | 
 | 	} | 
 |  | 
 | 	return pos - new_ie; | 
 | } | 
 |  | 
 | static bool is_bss(struct cfg80211_bss *a, const u8 *bssid, | 
 | 		   const u8 *ssid, size_t ssid_len) | 
 | { | 
 | 	const struct cfg80211_bss_ies *ies; | 
 | 	const u8 *ssidie; | 
 |  | 
 | 	if (bssid && !ether_addr_equal(a->bssid, bssid)) | 
 | 		return false; | 
 |  | 
 | 	if (!ssid) | 
 | 		return true; | 
 |  | 
 | 	ies = rcu_access_pointer(a->ies); | 
 | 	if (!ies) | 
 | 		return false; | 
 | 	ssidie = cfg80211_find_ie(WLAN_EID_SSID, ies->data, ies->len); | 
 | 	if (!ssidie) | 
 | 		return false; | 
 | 	if (ssidie[1] != ssid_len) | 
 | 		return false; | 
 | 	return memcmp(ssidie + 2, ssid, ssid_len) == 0; | 
 | } | 
 |  | 
 | static int | 
 | cfg80211_add_nontrans_list(struct cfg80211_bss *trans_bss, | 
 | 			   struct cfg80211_bss *nontrans_bss) | 
 | { | 
 | 	const u8 *ssid; | 
 | 	size_t ssid_len; | 
 | 	struct cfg80211_bss *bss = NULL; | 
 |  | 
 | 	rcu_read_lock(); | 
 | 	ssid = ieee80211_bss_get_ie(nontrans_bss, WLAN_EID_SSID); | 
 | 	if (!ssid) { | 
 | 		rcu_read_unlock(); | 
 | 		return -EINVAL; | 
 | 	} | 
 | 	ssid_len = ssid[1]; | 
 | 	ssid = ssid + 2; | 
 |  | 
 | 	/* check if nontrans_bss is in the list */ | 
 | 	list_for_each_entry(bss, &trans_bss->nontrans_list, nontrans_list) { | 
 | 		if (is_bss(bss, nontrans_bss->bssid, ssid, ssid_len)) { | 
 | 			rcu_read_unlock(); | 
 | 			return 0; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	rcu_read_unlock(); | 
 |  | 
 | 	/* | 
 | 	 * This is a bit weird - it's not on the list, but already on another | 
 | 	 * one! The only way that could happen is if there's some BSSID/SSID | 
 | 	 * shared by multiple APs in their multi-BSSID profiles, potentially | 
 | 	 * with hidden SSID mixed in ... ignore it. | 
 | 	 */ | 
 | 	if (!list_empty(&nontrans_bss->nontrans_list)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	/* add to the list */ | 
 | 	list_add_tail(&nontrans_bss->nontrans_list, &trans_bss->nontrans_list); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void __cfg80211_bss_expire(struct cfg80211_registered_device *rdev, | 
 | 				  unsigned long expire_time) | 
 | { | 
 | 	struct cfg80211_internal_bss *bss, *tmp; | 
 | 	bool expired = false; | 
 |  | 
 | 	lockdep_assert_held(&rdev->bss_lock); | 
 |  | 
 | 	list_for_each_entry_safe(bss, tmp, &rdev->bss_list, list) { | 
 | 		if (atomic_read(&bss->hold)) | 
 | 			continue; | 
 | 		if (!time_after(expire_time, bss->ts)) | 
 | 			continue; | 
 |  | 
 | 		if (__cfg80211_unlink_bss(rdev, bss)) | 
 | 			expired = true; | 
 | 	} | 
 |  | 
 | 	if (expired) | 
 | 		rdev->bss_generation++; | 
 | } | 
 |  | 
 | static bool cfg80211_bss_expire_oldest(struct cfg80211_registered_device *rdev) | 
 | { | 
 | 	struct cfg80211_internal_bss *bss, *oldest = NULL; | 
 | 	bool ret; | 
 |  | 
 | 	lockdep_assert_held(&rdev->bss_lock); | 
 |  | 
 | 	list_for_each_entry(bss, &rdev->bss_list, list) { | 
 | 		if (atomic_read(&bss->hold)) | 
 | 			continue; | 
 |  | 
 | 		if (!list_empty(&bss->hidden_list) && | 
 | 		    !bss->pub.hidden_beacon_bss) | 
 | 			continue; | 
 |  | 
 | 		if (oldest && time_before(oldest->ts, bss->ts)) | 
 | 			continue; | 
 | 		oldest = bss; | 
 | 	} | 
 |  | 
 | 	if (WARN_ON(!oldest)) | 
 | 		return false; | 
 |  | 
 | 	/* | 
 | 	 * The callers make sure to increase rdev->bss_generation if anything | 
 | 	 * gets removed (and a new entry added), so there's no need to also do | 
 | 	 * it here. | 
 | 	 */ | 
 |  | 
 | 	ret = __cfg80211_unlink_bss(rdev, oldest); | 
 | 	WARN_ON(!ret); | 
 | 	return ret; | 
 | } | 
 |  | 
 | void ___cfg80211_scan_done(struct cfg80211_registered_device *rdev, | 
 | 			   bool send_message) | 
 | { | 
 | 	struct cfg80211_scan_request *request; | 
 | 	struct wireless_dev *wdev; | 
 | 	struct sk_buff *msg; | 
 | #ifdef CONFIG_CFG80211_WEXT | 
 | 	union iwreq_data wrqu; | 
 | #endif | 
 |  | 
 | 	ASSERT_RTNL(); | 
 |  | 
 | 	if (rdev->scan_msg) { | 
 | 		nl80211_send_scan_msg(rdev, rdev->scan_msg); | 
 | 		rdev->scan_msg = NULL; | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	request = rdev->scan_req; | 
 | 	if (!request) | 
 | 		return; | 
 |  | 
 | 	wdev = request->wdev; | 
 |  | 
 | 	/* | 
 | 	 * This must be before sending the other events! | 
 | 	 * Otherwise, wpa_supplicant gets completely confused with | 
 | 	 * wext events. | 
 | 	 */ | 
 | 	if (wdev->netdev) | 
 | 		cfg80211_sme_scan_done(wdev->netdev); | 
 |  | 
 | 	if (!request->info.aborted && | 
 | 	    request->flags & NL80211_SCAN_FLAG_FLUSH) { | 
 | 		/* flush entries from previous scans */ | 
 | 		spin_lock_bh(&rdev->bss_lock); | 
 | 		__cfg80211_bss_expire(rdev, request->scan_start); | 
 | 		spin_unlock_bh(&rdev->bss_lock); | 
 | 	} | 
 |  | 
 | 	msg = nl80211_build_scan_msg(rdev, wdev, request->info.aborted); | 
 |  | 
 | #ifdef CONFIG_CFG80211_WEXT | 
 | 	if (wdev->netdev && !request->info.aborted) { | 
 | 		memset(&wrqu, 0, sizeof(wrqu)); | 
 |  | 
 | 		wireless_send_event(wdev->netdev, SIOCGIWSCAN, &wrqu, NULL); | 
 | 	} | 
 | #endif | 
 |  | 
 | 	if (wdev->netdev) | 
 | 		dev_put(wdev->netdev); | 
 |  | 
 | 	rdev->scan_req = NULL; | 
 | 	kfree(request); | 
 |  | 
 | 	if (!send_message) | 
 | 		rdev->scan_msg = msg; | 
 | 	else | 
 | 		nl80211_send_scan_msg(rdev, msg); | 
 | } | 
 |  | 
 | void __cfg80211_scan_done(struct work_struct *wk) | 
 | { | 
 | 	struct cfg80211_registered_device *rdev; | 
 |  | 
 | 	rdev = container_of(wk, struct cfg80211_registered_device, | 
 | 			    scan_done_wk); | 
 |  | 
 | 	rtnl_lock(); | 
 | 	___cfg80211_scan_done(rdev, true); | 
 | 	rtnl_unlock(); | 
 | } | 
 |  | 
 | void cfg80211_scan_done(struct cfg80211_scan_request *request, | 
 | 			struct cfg80211_scan_info *info) | 
 | { | 
 | 	trace_cfg80211_scan_done(request, info); | 
 | 	WARN_ON(request != wiphy_to_rdev(request->wiphy)->scan_req); | 
 |  | 
 | 	request->info = *info; | 
 | 	request->notified = true; | 
 | 	queue_work(cfg80211_wq, &wiphy_to_rdev(request->wiphy)->scan_done_wk); | 
 | } | 
 | EXPORT_SYMBOL(cfg80211_scan_done); | 
 |  | 
 | void cfg80211_add_sched_scan_req(struct cfg80211_registered_device *rdev, | 
 | 				 struct cfg80211_sched_scan_request *req) | 
 | { | 
 | 	ASSERT_RTNL(); | 
 |  | 
 | 	list_add_rcu(&req->list, &rdev->sched_scan_req_list); | 
 | } | 
 |  | 
 | static void cfg80211_del_sched_scan_req(struct cfg80211_registered_device *rdev, | 
 | 					struct cfg80211_sched_scan_request *req) | 
 | { | 
 | 	ASSERT_RTNL(); | 
 |  | 
 | 	list_del_rcu(&req->list); | 
 | 	kfree_rcu(req, rcu_head); | 
 | } | 
 |  | 
 | static struct cfg80211_sched_scan_request * | 
 | cfg80211_find_sched_scan_req(struct cfg80211_registered_device *rdev, u64 reqid) | 
 | { | 
 | 	struct cfg80211_sched_scan_request *pos; | 
 |  | 
 | 	WARN_ON_ONCE(!rcu_read_lock_held() && !lockdep_rtnl_is_held()); | 
 |  | 
 | 	list_for_each_entry_rcu(pos, &rdev->sched_scan_req_list, list) { | 
 | 		if (pos->reqid == reqid) | 
 | 			return pos; | 
 | 	} | 
 | 	return NULL; | 
 | } | 
 |  | 
 | /* | 
 |  * Determines if a scheduled scan request can be handled. When a legacy | 
 |  * scheduled scan is running no other scheduled scan is allowed regardless | 
 |  * whether the request is for legacy or multi-support scan. When a multi-support | 
 |  * scheduled scan is running a request for legacy scan is not allowed. In this | 
 |  * case a request for multi-support scan can be handled if resources are | 
 |  * available, ie. struct wiphy::max_sched_scan_reqs limit is not yet reached. | 
 |  */ | 
 | int cfg80211_sched_scan_req_possible(struct cfg80211_registered_device *rdev, | 
 | 				     bool want_multi) | 
 | { | 
 | 	struct cfg80211_sched_scan_request *pos; | 
 | 	int i = 0; | 
 |  | 
 | 	list_for_each_entry(pos, &rdev->sched_scan_req_list, list) { | 
 | 		/* request id zero means legacy in progress */ | 
 | 		if (!i && !pos->reqid) | 
 | 			return -EINPROGRESS; | 
 | 		i++; | 
 | 	} | 
 |  | 
 | 	if (i) { | 
 | 		/* no legacy allowed when multi request(s) are active */ | 
 | 		if (!want_multi) | 
 | 			return -EINPROGRESS; | 
 |  | 
 | 		/* resource limit reached */ | 
 | 		if (i == rdev->wiphy.max_sched_scan_reqs) | 
 | 			return -ENOSPC; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | void cfg80211_sched_scan_results_wk(struct work_struct *work) | 
 | { | 
 | 	struct cfg80211_registered_device *rdev; | 
 | 	struct cfg80211_sched_scan_request *req, *tmp; | 
 |  | 
 | 	rdev = container_of(work, struct cfg80211_registered_device, | 
 | 			   sched_scan_res_wk); | 
 |  | 
 | 	rtnl_lock(); | 
 | 	list_for_each_entry_safe(req, tmp, &rdev->sched_scan_req_list, list) { | 
 | 		if (req->report_results) { | 
 | 			req->report_results = false; | 
 | 			if (req->flags & NL80211_SCAN_FLAG_FLUSH) { | 
 | 				/* flush entries from previous scans */ | 
 | 				spin_lock_bh(&rdev->bss_lock); | 
 | 				__cfg80211_bss_expire(rdev, req->scan_start); | 
 | 				spin_unlock_bh(&rdev->bss_lock); | 
 | 				req->scan_start = jiffies; | 
 | 			} | 
 | 			nl80211_send_sched_scan(req, | 
 | 						NL80211_CMD_SCHED_SCAN_RESULTS); | 
 | 		} | 
 | 	} | 
 | 	rtnl_unlock(); | 
 | } | 
 |  | 
 | void cfg80211_sched_scan_results(struct wiphy *wiphy, u64 reqid) | 
 | { | 
 | 	struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy); | 
 | 	struct cfg80211_sched_scan_request *request; | 
 |  | 
 | 	trace_cfg80211_sched_scan_results(wiphy, reqid); | 
 | 	/* ignore if we're not scanning */ | 
 |  | 
 | 	rcu_read_lock(); | 
 | 	request = cfg80211_find_sched_scan_req(rdev, reqid); | 
 | 	if (request) { | 
 | 		request->report_results = true; | 
 | 		queue_work(cfg80211_wq, &rdev->sched_scan_res_wk); | 
 | 	} | 
 | 	rcu_read_unlock(); | 
 | } | 
 | EXPORT_SYMBOL(cfg80211_sched_scan_results); | 
 |  | 
 | void cfg80211_sched_scan_stopped_rtnl(struct wiphy *wiphy, u64 reqid) | 
 | { | 
 | 	struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy); | 
 |  | 
 | 	ASSERT_RTNL(); | 
 |  | 
 | 	trace_cfg80211_sched_scan_stopped(wiphy, reqid); | 
 |  | 
 | 	__cfg80211_stop_sched_scan(rdev, reqid, true); | 
 | } | 
 | EXPORT_SYMBOL(cfg80211_sched_scan_stopped_rtnl); | 
 |  | 
 | void cfg80211_sched_scan_stopped(struct wiphy *wiphy, u64 reqid) | 
 | { | 
 | 	rtnl_lock(); | 
 | 	cfg80211_sched_scan_stopped_rtnl(wiphy, reqid); | 
 | 	rtnl_unlock(); | 
 | } | 
 | EXPORT_SYMBOL(cfg80211_sched_scan_stopped); | 
 |  | 
 | int cfg80211_stop_sched_scan_req(struct cfg80211_registered_device *rdev, | 
 | 				 struct cfg80211_sched_scan_request *req, | 
 | 				 bool driver_initiated) | 
 | { | 
 | 	ASSERT_RTNL(); | 
 |  | 
 | 	if (!driver_initiated) { | 
 | 		int err = rdev_sched_scan_stop(rdev, req->dev, req->reqid); | 
 | 		if (err) | 
 | 			return err; | 
 | 	} | 
 |  | 
 | 	nl80211_send_sched_scan(req, NL80211_CMD_SCHED_SCAN_STOPPED); | 
 |  | 
 | 	cfg80211_del_sched_scan_req(rdev, req); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | int __cfg80211_stop_sched_scan(struct cfg80211_registered_device *rdev, | 
 | 			       u64 reqid, bool driver_initiated) | 
 | { | 
 | 	struct cfg80211_sched_scan_request *sched_scan_req; | 
 |  | 
 | 	ASSERT_RTNL(); | 
 |  | 
 | 	sched_scan_req = cfg80211_find_sched_scan_req(rdev, reqid); | 
 | 	if (!sched_scan_req) | 
 | 		return -ENOENT; | 
 |  | 
 | 	return cfg80211_stop_sched_scan_req(rdev, sched_scan_req, | 
 | 					    driver_initiated); | 
 | } | 
 |  | 
 | void cfg80211_bss_age(struct cfg80211_registered_device *rdev, | 
 |                       unsigned long age_secs) | 
 | { | 
 | 	struct cfg80211_internal_bss *bss; | 
 | 	unsigned long age_jiffies = msecs_to_jiffies(age_secs * MSEC_PER_SEC); | 
 |  | 
 | 	spin_lock_bh(&rdev->bss_lock); | 
 | 	list_for_each_entry(bss, &rdev->bss_list, list) | 
 | 		bss->ts -= age_jiffies; | 
 | 	spin_unlock_bh(&rdev->bss_lock); | 
 | } | 
 |  | 
 | void cfg80211_bss_expire(struct cfg80211_registered_device *rdev) | 
 | { | 
 | 	__cfg80211_bss_expire(rdev, jiffies - IEEE80211_SCAN_RESULT_EXPIRE); | 
 | } | 
 |  | 
 | const struct element * | 
 | cfg80211_find_elem_match(u8 eid, const u8 *ies, unsigned int len, | 
 | 			 const u8 *match, unsigned int match_len, | 
 | 			 unsigned int match_offset) | 
 | { | 
 | 	const struct element *elem; | 
 |  | 
 | 	for_each_element_id(elem, eid, ies, len) { | 
 | 		if (elem->datalen >= match_offset + match_len && | 
 | 		    !memcmp(elem->data + match_offset, match, match_len)) | 
 | 			return elem; | 
 | 	} | 
 |  | 
 | 	return NULL; | 
 | } | 
 | EXPORT_SYMBOL(cfg80211_find_elem_match); | 
 |  | 
 | const struct element *cfg80211_find_vendor_elem(unsigned int oui, int oui_type, | 
 | 						const u8 *ies, | 
 | 						unsigned int len) | 
 | { | 
 | 	const struct element *elem; | 
 | 	u8 match[] = { oui >> 16, oui >> 8, oui, oui_type }; | 
 | 	int match_len = (oui_type < 0) ? 3 : sizeof(match); | 
 |  | 
 | 	if (WARN_ON(oui_type > 0xff)) | 
 | 		return NULL; | 
 |  | 
 | 	elem = cfg80211_find_elem_match(WLAN_EID_VENDOR_SPECIFIC, ies, len, | 
 | 					match, match_len, 0); | 
 |  | 
 | 	if (!elem || elem->datalen < 4) | 
 | 		return NULL; | 
 |  | 
 | 	return elem; | 
 | } | 
 | EXPORT_SYMBOL(cfg80211_find_vendor_elem); | 
 |  | 
 | /** | 
 |  * enum bss_compare_mode - BSS compare mode | 
 |  * @BSS_CMP_REGULAR: regular compare mode (for insertion and normal find) | 
 |  * @BSS_CMP_HIDE_ZLEN: find hidden SSID with zero-length mode | 
 |  * @BSS_CMP_HIDE_NUL: find hidden SSID with NUL-ed out mode | 
 |  */ | 
 | enum bss_compare_mode { | 
 | 	BSS_CMP_REGULAR, | 
 | 	BSS_CMP_HIDE_ZLEN, | 
 | 	BSS_CMP_HIDE_NUL, | 
 | }; | 
 |  | 
 | static int cmp_bss(struct cfg80211_bss *a, | 
 | 		   struct cfg80211_bss *b, | 
 | 		   enum bss_compare_mode mode) | 
 | { | 
 | 	const struct cfg80211_bss_ies *a_ies, *b_ies; | 
 | 	const u8 *ie1 = NULL; | 
 | 	const u8 *ie2 = NULL; | 
 | 	int i, r; | 
 |  | 
 | 	if (a->channel != b->channel) | 
 | 		return b->channel->center_freq - a->channel->center_freq; | 
 |  | 
 | 	a_ies = rcu_access_pointer(a->ies); | 
 | 	if (!a_ies) | 
 | 		return -1; | 
 | 	b_ies = rcu_access_pointer(b->ies); | 
 | 	if (!b_ies) | 
 | 		return 1; | 
 |  | 
 | 	if (WLAN_CAPABILITY_IS_STA_BSS(a->capability)) | 
 | 		ie1 = cfg80211_find_ie(WLAN_EID_MESH_ID, | 
 | 				       a_ies->data, a_ies->len); | 
 | 	if (WLAN_CAPABILITY_IS_STA_BSS(b->capability)) | 
 | 		ie2 = cfg80211_find_ie(WLAN_EID_MESH_ID, | 
 | 				       b_ies->data, b_ies->len); | 
 | 	if (ie1 && ie2) { | 
 | 		int mesh_id_cmp; | 
 |  | 
 | 		if (ie1[1] == ie2[1]) | 
 | 			mesh_id_cmp = memcmp(ie1 + 2, ie2 + 2, ie1[1]); | 
 | 		else | 
 | 			mesh_id_cmp = ie2[1] - ie1[1]; | 
 |  | 
 | 		ie1 = cfg80211_find_ie(WLAN_EID_MESH_CONFIG, | 
 | 				       a_ies->data, a_ies->len); | 
 | 		ie2 = cfg80211_find_ie(WLAN_EID_MESH_CONFIG, | 
 | 				       b_ies->data, b_ies->len); | 
 | 		if (ie1 && ie2) { | 
 | 			if (mesh_id_cmp) | 
 | 				return mesh_id_cmp; | 
 | 			if (ie1[1] != ie2[1]) | 
 | 				return ie2[1] - ie1[1]; | 
 | 			return memcmp(ie1 + 2, ie2 + 2, ie1[1]); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	r = memcmp(a->bssid, b->bssid, sizeof(a->bssid)); | 
 | 	if (r) | 
 | 		return r; | 
 |  | 
 | 	ie1 = cfg80211_find_ie(WLAN_EID_SSID, a_ies->data, a_ies->len); | 
 | 	ie2 = cfg80211_find_ie(WLAN_EID_SSID, b_ies->data, b_ies->len); | 
 |  | 
 | 	if (!ie1 && !ie2) | 
 | 		return 0; | 
 |  | 
 | 	/* | 
 | 	 * Note that with "hide_ssid", the function returns a match if | 
 | 	 * the already-present BSS ("b") is a hidden SSID beacon for | 
 | 	 * the new BSS ("a"). | 
 | 	 */ | 
 |  | 
 | 	/* sort missing IE before (left of) present IE */ | 
 | 	if (!ie1) | 
 | 		return -1; | 
 | 	if (!ie2) | 
 | 		return 1; | 
 |  | 
 | 	switch (mode) { | 
 | 	case BSS_CMP_HIDE_ZLEN: | 
 | 		/* | 
 | 		 * In ZLEN mode we assume the BSS entry we're | 
 | 		 * looking for has a zero-length SSID. So if | 
 | 		 * the one we're looking at right now has that, | 
 | 		 * return 0. Otherwise, return the difference | 
 | 		 * in length, but since we're looking for the | 
 | 		 * 0-length it's really equivalent to returning | 
 | 		 * the length of the one we're looking at. | 
 | 		 * | 
 | 		 * No content comparison is needed as we assume | 
 | 		 * the content length is zero. | 
 | 		 */ | 
 | 		return ie2[1]; | 
 | 	case BSS_CMP_REGULAR: | 
 | 	default: | 
 | 		/* sort by length first, then by contents */ | 
 | 		if (ie1[1] != ie2[1]) | 
 | 			return ie2[1] - ie1[1]; | 
 | 		return memcmp(ie1 + 2, ie2 + 2, ie1[1]); | 
 | 	case BSS_CMP_HIDE_NUL: | 
 | 		if (ie1[1] != ie2[1]) | 
 | 			return ie2[1] - ie1[1]; | 
 | 		/* this is equivalent to memcmp(zeroes, ie2 + 2, len) */ | 
 | 		for (i = 0; i < ie2[1]; i++) | 
 | 			if (ie2[i + 2]) | 
 | 				return -1; | 
 | 		return 0; | 
 | 	} | 
 | } | 
 |  | 
 | static bool cfg80211_bss_type_match(u16 capability, | 
 | 				    enum nl80211_band band, | 
 | 				    enum ieee80211_bss_type bss_type) | 
 | { | 
 | 	bool ret = true; | 
 | 	u16 mask, val; | 
 |  | 
 | 	if (bss_type == IEEE80211_BSS_TYPE_ANY) | 
 | 		return ret; | 
 |  | 
 | 	if (band == NL80211_BAND_60GHZ) { | 
 | 		mask = WLAN_CAPABILITY_DMG_TYPE_MASK; | 
 | 		switch (bss_type) { | 
 | 		case IEEE80211_BSS_TYPE_ESS: | 
 | 			val = WLAN_CAPABILITY_DMG_TYPE_AP; | 
 | 			break; | 
 | 		case IEEE80211_BSS_TYPE_PBSS: | 
 | 			val = WLAN_CAPABILITY_DMG_TYPE_PBSS; | 
 | 			break; | 
 | 		case IEEE80211_BSS_TYPE_IBSS: | 
 | 			val = WLAN_CAPABILITY_DMG_TYPE_IBSS; | 
 | 			break; | 
 | 		default: | 
 | 			return false; | 
 | 		} | 
 | 	} else { | 
 | 		mask = WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_IBSS; | 
 | 		switch (bss_type) { | 
 | 		case IEEE80211_BSS_TYPE_ESS: | 
 | 			val = WLAN_CAPABILITY_ESS; | 
 | 			break; | 
 | 		case IEEE80211_BSS_TYPE_IBSS: | 
 | 			val = WLAN_CAPABILITY_IBSS; | 
 | 			break; | 
 | 		case IEEE80211_BSS_TYPE_MBSS: | 
 | 			val = 0; | 
 | 			break; | 
 | 		default: | 
 | 			return false; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	ret = ((capability & mask) == val); | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* Returned bss is reference counted and must be cleaned up appropriately. */ | 
 | struct cfg80211_bss *cfg80211_get_bss(struct wiphy *wiphy, | 
 | 				      struct ieee80211_channel *channel, | 
 | 				      const u8 *bssid, | 
 | 				      const u8 *ssid, size_t ssid_len, | 
 | 				      enum ieee80211_bss_type bss_type, | 
 | 				      enum ieee80211_privacy privacy) | 
 | { | 
 | 	struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy); | 
 | 	struct cfg80211_internal_bss *bss, *res = NULL; | 
 | 	unsigned long now = jiffies; | 
 | 	int bss_privacy; | 
 |  | 
 | 	trace_cfg80211_get_bss(wiphy, channel, bssid, ssid, ssid_len, bss_type, | 
 | 			       privacy); | 
 |  | 
 | 	spin_lock_bh(&rdev->bss_lock); | 
 |  | 
 | 	list_for_each_entry(bss, &rdev->bss_list, list) { | 
 | 		if (!cfg80211_bss_type_match(bss->pub.capability, | 
 | 					     bss->pub.channel->band, bss_type)) | 
 | 			continue; | 
 |  | 
 | 		bss_privacy = (bss->pub.capability & WLAN_CAPABILITY_PRIVACY); | 
 | 		if ((privacy == IEEE80211_PRIVACY_ON && !bss_privacy) || | 
 | 		    (privacy == IEEE80211_PRIVACY_OFF && bss_privacy)) | 
 | 			continue; | 
 | 		if (channel && bss->pub.channel != channel) | 
 | 			continue; | 
 | 		if (!is_valid_ether_addr(bss->pub.bssid)) | 
 | 			continue; | 
 | 		/* Don't get expired BSS structs */ | 
 | 		if (time_after(now, bss->ts + IEEE80211_SCAN_RESULT_EXPIRE) && | 
 | 		    !atomic_read(&bss->hold)) | 
 | 			continue; | 
 | 		if (is_bss(&bss->pub, bssid, ssid, ssid_len)) { | 
 | 			res = bss; | 
 | 			bss_ref_get(rdev, res); | 
 | 			break; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	spin_unlock_bh(&rdev->bss_lock); | 
 | 	if (!res) | 
 | 		return NULL; | 
 | 	trace_cfg80211_return_bss(&res->pub); | 
 | 	return &res->pub; | 
 | } | 
 | EXPORT_SYMBOL(cfg80211_get_bss); | 
 |  | 
 | static bool rb_insert_bss(struct cfg80211_registered_device *rdev, | 
 | 			  struct cfg80211_internal_bss *bss) | 
 | { | 
 | 	struct rb_node **p = &rdev->bss_tree.rb_node; | 
 | 	struct rb_node *parent = NULL; | 
 | 	struct cfg80211_internal_bss *tbss; | 
 | 	int cmp; | 
 |  | 
 | 	while (*p) { | 
 | 		parent = *p; | 
 | 		tbss = rb_entry(parent, struct cfg80211_internal_bss, rbn); | 
 |  | 
 | 		cmp = cmp_bss(&bss->pub, &tbss->pub, BSS_CMP_REGULAR); | 
 |  | 
 | 		if (WARN_ON(!cmp)) { | 
 | 			/* will sort of leak this BSS */ | 
 | 			return false; | 
 | 		} | 
 |  | 
 | 		if (cmp < 0) | 
 | 			p = &(*p)->rb_left; | 
 | 		else | 
 | 			p = &(*p)->rb_right; | 
 | 	} | 
 |  | 
 | 	rb_link_node(&bss->rbn, parent, p); | 
 | 	rb_insert_color(&bss->rbn, &rdev->bss_tree); | 
 | 	return true; | 
 | } | 
 |  | 
 | static struct cfg80211_internal_bss * | 
 | rb_find_bss(struct cfg80211_registered_device *rdev, | 
 | 	    struct cfg80211_internal_bss *res, | 
 | 	    enum bss_compare_mode mode) | 
 | { | 
 | 	struct rb_node *n = rdev->bss_tree.rb_node; | 
 | 	struct cfg80211_internal_bss *bss; | 
 | 	int r; | 
 |  | 
 | 	while (n) { | 
 | 		bss = rb_entry(n, struct cfg80211_internal_bss, rbn); | 
 | 		r = cmp_bss(&res->pub, &bss->pub, mode); | 
 |  | 
 | 		if (r == 0) | 
 | 			return bss; | 
 | 		else if (r < 0) | 
 | 			n = n->rb_left; | 
 | 		else | 
 | 			n = n->rb_right; | 
 | 	} | 
 |  | 
 | 	return NULL; | 
 | } | 
 |  | 
 | static void cfg80211_insert_bss(struct cfg80211_registered_device *rdev, | 
 | 				struct cfg80211_internal_bss *bss) | 
 | { | 
 | 	lockdep_assert_held(&rdev->bss_lock); | 
 |  | 
 | 	if (!rb_insert_bss(rdev, bss)) | 
 | 		return; | 
 | 	list_add_tail(&bss->list, &rdev->bss_list); | 
 | 	rdev->bss_entries++; | 
 | } | 
 |  | 
 | static void cfg80211_rehash_bss(struct cfg80211_registered_device *rdev, | 
 |                                 struct cfg80211_internal_bss *bss) | 
 | { | 
 | 	lockdep_assert_held(&rdev->bss_lock); | 
 |  | 
 | 	rb_erase(&bss->rbn, &rdev->bss_tree); | 
 | 	if (!rb_insert_bss(rdev, bss)) { | 
 | 		list_del(&bss->list); | 
 | 		if (!list_empty(&bss->hidden_list)) | 
 | 			list_del_init(&bss->hidden_list); | 
 | 		if (!list_empty(&bss->pub.nontrans_list)) | 
 | 			list_del_init(&bss->pub.nontrans_list); | 
 | 		rdev->bss_entries--; | 
 | 	} | 
 | 	rdev->bss_generation++; | 
 | } | 
 |  | 
 | static bool cfg80211_combine_bsses(struct cfg80211_registered_device *rdev, | 
 | 				   struct cfg80211_internal_bss *new) | 
 | { | 
 | 	const struct cfg80211_bss_ies *ies; | 
 | 	struct cfg80211_internal_bss *bss; | 
 | 	const u8 *ie; | 
 | 	int i, ssidlen; | 
 | 	u8 fold = 0; | 
 | 	u32 n_entries = 0; | 
 |  | 
 | 	ies = rcu_access_pointer(new->pub.beacon_ies); | 
 | 	if (WARN_ON(!ies)) | 
 | 		return false; | 
 |  | 
 | 	ie = cfg80211_find_ie(WLAN_EID_SSID, ies->data, ies->len); | 
 | 	if (!ie) { | 
 | 		/* nothing to do */ | 
 | 		return true; | 
 | 	} | 
 |  | 
 | 	ssidlen = ie[1]; | 
 | 	for (i = 0; i < ssidlen; i++) | 
 | 		fold |= ie[2 + i]; | 
 |  | 
 | 	if (fold) { | 
 | 		/* not a hidden SSID */ | 
 | 		return true; | 
 | 	} | 
 |  | 
 | 	/* This is the bad part ... */ | 
 |  | 
 | 	list_for_each_entry(bss, &rdev->bss_list, list) { | 
 | 		/* | 
 | 		 * we're iterating all the entries anyway, so take the | 
 | 		 * opportunity to validate the list length accounting | 
 | 		 */ | 
 | 		n_entries++; | 
 |  | 
 | 		if (!ether_addr_equal(bss->pub.bssid, new->pub.bssid)) | 
 | 			continue; | 
 | 		if (bss->pub.channel != new->pub.channel) | 
 | 			continue; | 
 | 		if (bss->pub.scan_width != new->pub.scan_width) | 
 | 			continue; | 
 | 		if (rcu_access_pointer(bss->pub.beacon_ies)) | 
 | 			continue; | 
 | 		ies = rcu_access_pointer(bss->pub.ies); | 
 | 		if (!ies) | 
 | 			continue; | 
 | 		ie = cfg80211_find_ie(WLAN_EID_SSID, ies->data, ies->len); | 
 | 		if (!ie) | 
 | 			continue; | 
 | 		if (ssidlen && ie[1] != ssidlen) | 
 | 			continue; | 
 | 		if (WARN_ON_ONCE(bss->pub.hidden_beacon_bss)) | 
 | 			continue; | 
 | 		if (WARN_ON_ONCE(!list_empty(&bss->hidden_list))) | 
 | 			list_del(&bss->hidden_list); | 
 | 		/* combine them */ | 
 | 		list_add(&bss->hidden_list, &new->hidden_list); | 
 | 		bss->pub.hidden_beacon_bss = &new->pub; | 
 | 		new->refcount += bss->refcount; | 
 | 		rcu_assign_pointer(bss->pub.beacon_ies, | 
 | 				   new->pub.beacon_ies); | 
 | 	} | 
 |  | 
 | 	WARN_ONCE(n_entries != rdev->bss_entries, | 
 | 		  "rdev bss entries[%d]/list[len:%d] corruption\n", | 
 | 		  rdev->bss_entries, n_entries); | 
 |  | 
 | 	return true; | 
 | } | 
 |  | 
 | struct cfg80211_non_tx_bss { | 
 | 	struct cfg80211_bss *tx_bss; | 
 | 	u8 max_bssid_indicator; | 
 | 	u8 bssid_index; | 
 | }; | 
 |  | 
 | static void cfg80211_update_hidden_bsses(struct cfg80211_internal_bss *known, | 
 | 					 const struct cfg80211_bss_ies *new_ies, | 
 | 					 const struct cfg80211_bss_ies *old_ies) | 
 | { | 
 | 	struct cfg80211_internal_bss *bss; | 
 |  | 
 | 	/* Assign beacon IEs to all sub entries */ | 
 | 	list_for_each_entry(bss, &known->hidden_list, hidden_list) { | 
 | 		const struct cfg80211_bss_ies *ies; | 
 |  | 
 | 		ies = rcu_access_pointer(bss->pub.beacon_ies); | 
 | 		WARN_ON(ies != old_ies); | 
 |  | 
 | 		rcu_assign_pointer(bss->pub.beacon_ies, new_ies); | 
 | 	} | 
 | } | 
 |  | 
 | static bool | 
 | cfg80211_update_known_bss(struct cfg80211_registered_device *rdev, | 
 | 			  struct cfg80211_internal_bss *known, | 
 | 			  struct cfg80211_internal_bss *new, | 
 | 			  bool signal_valid) | 
 | { | 
 | 	lockdep_assert_held(&rdev->bss_lock); | 
 |  | 
 | 	/* Update IEs */ | 
 | 	if (rcu_access_pointer(new->pub.proberesp_ies)) { | 
 | 		const struct cfg80211_bss_ies *old; | 
 |  | 
 | 		old = rcu_access_pointer(known->pub.proberesp_ies); | 
 |  | 
 | 		rcu_assign_pointer(known->pub.proberesp_ies, | 
 | 				   new->pub.proberesp_ies); | 
 | 		/* Override possible earlier Beacon frame IEs */ | 
 | 		rcu_assign_pointer(known->pub.ies, | 
 | 				   new->pub.proberesp_ies); | 
 | 		if (old) | 
 | 			kfree_rcu((struct cfg80211_bss_ies *)old, rcu_head); | 
 | 	} else if (rcu_access_pointer(new->pub.beacon_ies)) { | 
 | 		const struct cfg80211_bss_ies *old; | 
 |  | 
 | 		if (known->pub.hidden_beacon_bss && | 
 | 		    !list_empty(&known->hidden_list)) { | 
 | 			const struct cfg80211_bss_ies *f; | 
 |  | 
 | 			/* The known BSS struct is one of the probe | 
 | 			 * response members of a group, but we're | 
 | 			 * receiving a beacon (beacon_ies in the new | 
 | 			 * bss is used). This can only mean that the | 
 | 			 * AP changed its beacon from not having an | 
 | 			 * SSID to showing it, which is confusing so | 
 | 			 * drop this information. | 
 | 			 */ | 
 |  | 
 | 			f = rcu_access_pointer(new->pub.beacon_ies); | 
 | 			kfree_rcu((struct cfg80211_bss_ies *)f, rcu_head); | 
 | 			return false; | 
 | 		} | 
 |  | 
 | 		old = rcu_access_pointer(known->pub.beacon_ies); | 
 |  | 
 | 		rcu_assign_pointer(known->pub.beacon_ies, new->pub.beacon_ies); | 
 |  | 
 | 		/* Override IEs if they were from a beacon before */ | 
 | 		if (old == rcu_access_pointer(known->pub.ies)) | 
 | 			rcu_assign_pointer(known->pub.ies, new->pub.beacon_ies); | 
 |  | 
 | 		cfg80211_update_hidden_bsses(known, | 
 | 					     rcu_access_pointer(new->pub.beacon_ies), | 
 | 					     old); | 
 |  | 
 | 		if (old) | 
 | 			kfree_rcu((struct cfg80211_bss_ies *)old, rcu_head); | 
 | 	} | 
 |  | 
 | 	known->pub.beacon_interval = new->pub.beacon_interval; | 
 |  | 
 | 	/* don't update the signal if beacon was heard on | 
 | 	 * adjacent channel. | 
 | 	 */ | 
 | 	if (signal_valid) | 
 | 		known->pub.signal = new->pub.signal; | 
 | 	known->pub.capability = new->pub.capability; | 
 | 	known->ts = new->ts; | 
 | 	known->ts_boottime = new->ts_boottime; | 
 | 	known->parent_tsf = new->parent_tsf; | 
 | 	known->pub.chains = new->pub.chains; | 
 | 	memcpy(known->pub.chain_signal, new->pub.chain_signal, | 
 | 	       IEEE80211_MAX_CHAINS); | 
 | 	ether_addr_copy(known->parent_bssid, new->parent_bssid); | 
 | 	known->pub.max_bssid_indicator = new->pub.max_bssid_indicator; | 
 | 	known->pub.bssid_index = new->pub.bssid_index; | 
 |  | 
 | 	return true; | 
 | } | 
 |  | 
 | /* Returned bss is reference counted and must be cleaned up appropriately. */ | 
 | struct cfg80211_internal_bss * | 
 | cfg80211_bss_update(struct cfg80211_registered_device *rdev, | 
 | 		    struct cfg80211_internal_bss *tmp, | 
 | 		    bool signal_valid, unsigned long ts) | 
 | { | 
 | 	struct cfg80211_internal_bss *found = NULL; | 
 |  | 
 | 	if (WARN_ON(!tmp->pub.channel)) | 
 | 		return NULL; | 
 |  | 
 | 	tmp->ts = ts; | 
 |  | 
 | 	spin_lock_bh(&rdev->bss_lock); | 
 |  | 
 | 	if (WARN_ON(!rcu_access_pointer(tmp->pub.ies))) { | 
 | 		spin_unlock_bh(&rdev->bss_lock); | 
 | 		return NULL; | 
 | 	} | 
 |  | 
 | 	found = rb_find_bss(rdev, tmp, BSS_CMP_REGULAR); | 
 |  | 
 | 	if (found) { | 
 | 		if (!cfg80211_update_known_bss(rdev, found, tmp, signal_valid)) | 
 | 			goto drop; | 
 | 	} else { | 
 | 		struct cfg80211_internal_bss *new; | 
 | 		struct cfg80211_internal_bss *hidden; | 
 | 		struct cfg80211_bss_ies *ies; | 
 |  | 
 | 		/* | 
 | 		 * create a copy -- the "res" variable that is passed in | 
 | 		 * is allocated on the stack since it's not needed in the | 
 | 		 * more common case of an update | 
 | 		 */ | 
 | 		new = kzalloc(sizeof(*new) + rdev->wiphy.bss_priv_size, | 
 | 			      GFP_ATOMIC); | 
 | 		if (!new) { | 
 | 			ies = (void *)rcu_dereference(tmp->pub.beacon_ies); | 
 | 			if (ies) | 
 | 				kfree_rcu(ies, rcu_head); | 
 | 			ies = (void *)rcu_dereference(tmp->pub.proberesp_ies); | 
 | 			if (ies) | 
 | 				kfree_rcu(ies, rcu_head); | 
 | 			goto drop; | 
 | 		} | 
 | 		memcpy(new, tmp, sizeof(*new)); | 
 | 		new->refcount = 1; | 
 | 		INIT_LIST_HEAD(&new->hidden_list); | 
 | 		INIT_LIST_HEAD(&new->pub.nontrans_list); | 
 | 		/* we'll set this later if it was non-NULL */ | 
 | 		new->pub.transmitted_bss = NULL; | 
 |  | 
 | 		if (rcu_access_pointer(tmp->pub.proberesp_ies)) { | 
 | 			hidden = rb_find_bss(rdev, tmp, BSS_CMP_HIDE_ZLEN); | 
 | 			if (!hidden) | 
 | 				hidden = rb_find_bss(rdev, tmp, | 
 | 						     BSS_CMP_HIDE_NUL); | 
 | 			if (hidden) { | 
 | 				new->pub.hidden_beacon_bss = &hidden->pub; | 
 | 				list_add(&new->hidden_list, | 
 | 					 &hidden->hidden_list); | 
 | 				hidden->refcount++; | 
 |  | 
 | 				ies = (void *)rcu_access_pointer(new->pub.beacon_ies); | 
 | 				rcu_assign_pointer(new->pub.beacon_ies, | 
 | 						   hidden->pub.beacon_ies); | 
 | 				if (ies) | 
 | 					kfree_rcu(ies, rcu_head); | 
 | 			} | 
 | 		} else { | 
 | 			/* | 
 | 			 * Ok so we found a beacon, and don't have an entry. If | 
 | 			 * it's a beacon with hidden SSID, we might be in for an | 
 | 			 * expensive search for any probe responses that should | 
 | 			 * be grouped with this beacon for updates ... | 
 | 			 */ | 
 | 			if (!cfg80211_combine_bsses(rdev, new)) { | 
 | 				bss_ref_put(rdev, new); | 
 | 				goto drop; | 
 | 			} | 
 | 		} | 
 |  | 
 | 		if (rdev->bss_entries >= bss_entries_limit && | 
 | 		    !cfg80211_bss_expire_oldest(rdev)) { | 
 | 			bss_ref_put(rdev, new); | 
 | 			goto drop; | 
 | 		} | 
 |  | 
 | 		/* This must be before the call to bss_ref_get */ | 
 | 		if (tmp->pub.transmitted_bss) { | 
 | 			struct cfg80211_internal_bss *pbss = | 
 | 				container_of(tmp->pub.transmitted_bss, | 
 | 					     struct cfg80211_internal_bss, | 
 | 					     pub); | 
 |  | 
 | 			new->pub.transmitted_bss = tmp->pub.transmitted_bss; | 
 | 			bss_ref_get(rdev, pbss); | 
 | 		} | 
 |  | 
 | 		cfg80211_insert_bss(rdev, new); | 
 | 		found = new; | 
 | 	} | 
 |  | 
 | 	rdev->bss_generation++; | 
 | 	bss_ref_get(rdev, found); | 
 | 	spin_unlock_bh(&rdev->bss_lock); | 
 |  | 
 | 	return found; | 
 |  drop: | 
 | 	spin_unlock_bh(&rdev->bss_lock); | 
 | 	return NULL; | 
 | } | 
 |  | 
 | /* | 
 |  * Update RX channel information based on the available frame payload | 
 |  * information. This is mainly for the 2.4 GHz band where frames can be received | 
 |  * from neighboring channels and the Beacon frames use the DSSS Parameter Set | 
 |  * element to indicate the current (transmitting) channel, but this might also | 
 |  * be needed on other bands if RX frequency does not match with the actual | 
 |  * operating channel of a BSS. | 
 |  */ | 
 | static struct ieee80211_channel * | 
 | cfg80211_get_bss_channel(struct wiphy *wiphy, const u8 *ie, size_t ielen, | 
 | 			 struct ieee80211_channel *channel, | 
 | 			 enum nl80211_bss_scan_width scan_width) | 
 | { | 
 | 	const u8 *tmp; | 
 | 	u32 freq; | 
 | 	int channel_number = -1; | 
 | 	struct ieee80211_channel *alt_channel; | 
 |  | 
 | 	tmp = cfg80211_find_ie(WLAN_EID_DS_PARAMS, ie, ielen); | 
 | 	if (tmp && tmp[1] == 1) { | 
 | 		channel_number = tmp[2]; | 
 | 	} else { | 
 | 		tmp = cfg80211_find_ie(WLAN_EID_HT_OPERATION, ie, ielen); | 
 | 		if (tmp && tmp[1] >= sizeof(struct ieee80211_ht_operation)) { | 
 | 			struct ieee80211_ht_operation *htop = (void *)(tmp + 2); | 
 |  | 
 | 			channel_number = htop->primary_chan; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (channel_number < 0) { | 
 | 		/* No channel information in frame payload */ | 
 | 		return channel; | 
 | 	} | 
 |  | 
 | 	freq = ieee80211_channel_to_freq_khz(channel_number, channel->band); | 
 | 	alt_channel = ieee80211_get_channel_khz(wiphy, freq); | 
 | 	if (!alt_channel) { | 
 | 		if (channel->band == NL80211_BAND_2GHZ) { | 
 | 			/* | 
 | 			 * Better not allow unexpected channels when that could | 
 | 			 * be going beyond the 1-11 range (e.g., discovering | 
 | 			 * BSS on channel 12 when radio is configured for | 
 | 			 * channel 11. | 
 | 			 */ | 
 | 			return NULL; | 
 | 		} | 
 |  | 
 | 		/* No match for the payload channel number - ignore it */ | 
 | 		return channel; | 
 | 	} | 
 |  | 
 | 	if (scan_width == NL80211_BSS_CHAN_WIDTH_10 || | 
 | 	    scan_width == NL80211_BSS_CHAN_WIDTH_5) { | 
 | 		/* | 
 | 		 * Ignore channel number in 5 and 10 MHz channels where there | 
 | 		 * may not be an n:1 or 1:n mapping between frequencies and | 
 | 		 * channel numbers. | 
 | 		 */ | 
 | 		return channel; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Use the channel determined through the payload channel number | 
 | 	 * instead of the RX channel reported by the driver. | 
 | 	 */ | 
 | 	if (alt_channel->flags & IEEE80211_CHAN_DISABLED) | 
 | 		return NULL; | 
 | 	return alt_channel; | 
 | } | 
 |  | 
 | /* Returned bss is reference counted and must be cleaned up appropriately. */ | 
 | static struct cfg80211_bss * | 
 | cfg80211_inform_single_bss_data(struct wiphy *wiphy, | 
 | 				struct cfg80211_inform_bss *data, | 
 | 				enum cfg80211_bss_frame_type ftype, | 
 | 				const u8 *bssid, u64 tsf, u16 capability, | 
 | 				u16 beacon_interval, const u8 *ie, size_t ielen, | 
 | 				struct cfg80211_non_tx_bss *non_tx_data, | 
 | 				gfp_t gfp) | 
 | { | 
 | 	struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy); | 
 | 	struct cfg80211_bss_ies *ies; | 
 | 	struct ieee80211_channel *channel; | 
 | 	struct cfg80211_internal_bss tmp = {}, *res; | 
 | 	int bss_type; | 
 | 	bool signal_valid; | 
 | 	unsigned long ts; | 
 |  | 
 | 	if (WARN_ON(!wiphy)) | 
 | 		return NULL; | 
 |  | 
 | 	if (WARN_ON(wiphy->signal_type == CFG80211_SIGNAL_TYPE_UNSPEC && | 
 | 		    (data->signal < 0 || data->signal > 100))) | 
 | 		return NULL; | 
 |  | 
 | 	channel = cfg80211_get_bss_channel(wiphy, ie, ielen, data->chan, | 
 | 					   data->scan_width); | 
 | 	if (!channel) | 
 | 		return NULL; | 
 |  | 
 | 	memcpy(tmp.pub.bssid, bssid, ETH_ALEN); | 
 | 	tmp.pub.channel = channel; | 
 | 	tmp.pub.scan_width = data->scan_width; | 
 | 	tmp.pub.signal = data->signal; | 
 | 	tmp.pub.beacon_interval = beacon_interval; | 
 | 	tmp.pub.capability = capability; | 
 | 	tmp.ts_boottime = data->boottime_ns; | 
 | 	if (non_tx_data) { | 
 | 		tmp.pub.transmitted_bss = non_tx_data->tx_bss; | 
 | 		ts = bss_from_pub(non_tx_data->tx_bss)->ts; | 
 | 		tmp.pub.bssid_index = non_tx_data->bssid_index; | 
 | 		tmp.pub.max_bssid_indicator = non_tx_data->max_bssid_indicator; | 
 | 	} else { | 
 | 		ts = jiffies; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * If we do not know here whether the IEs are from a Beacon or Probe | 
 | 	 * Response frame, we need to pick one of the options and only use it | 
 | 	 * with the driver that does not provide the full Beacon/Probe Response | 
 | 	 * frame. Use Beacon frame pointer to avoid indicating that this should | 
 | 	 * override the IEs pointer should we have received an earlier | 
 | 	 * indication of Probe Response data. | 
 | 	 */ | 
 | 	ies = kzalloc(sizeof(*ies) + ielen, gfp); | 
 | 	if (!ies) | 
 | 		return NULL; | 
 | 	ies->len = ielen; | 
 | 	ies->tsf = tsf; | 
 | 	ies->from_beacon = false; | 
 | 	memcpy(ies->data, ie, ielen); | 
 |  | 
 | 	switch (ftype) { | 
 | 	case CFG80211_BSS_FTYPE_BEACON: | 
 | 		ies->from_beacon = true; | 
 | 		/* fall through */ | 
 | 	case CFG80211_BSS_FTYPE_UNKNOWN: | 
 | 		rcu_assign_pointer(tmp.pub.beacon_ies, ies); | 
 | 		break; | 
 | 	case CFG80211_BSS_FTYPE_PRESP: | 
 | 		rcu_assign_pointer(tmp.pub.proberesp_ies, ies); | 
 | 		break; | 
 | 	} | 
 | 	rcu_assign_pointer(tmp.pub.ies, ies); | 
 |  | 
 | 	signal_valid = abs(data->chan->center_freq - channel->center_freq) <= | 
 | 		wiphy->max_adj_channel_rssi_comp; | 
 | 	res = cfg80211_bss_update(wiphy_to_rdev(wiphy), &tmp, signal_valid, ts); | 
 | 	if (!res) | 
 | 		return NULL; | 
 |  | 
 | 	if (channel->band == NL80211_BAND_60GHZ) { | 
 | 		bss_type = res->pub.capability & WLAN_CAPABILITY_DMG_TYPE_MASK; | 
 | 		if (bss_type == WLAN_CAPABILITY_DMG_TYPE_AP || | 
 | 		    bss_type == WLAN_CAPABILITY_DMG_TYPE_PBSS) | 
 | 			regulatory_hint_found_beacon(wiphy, channel, gfp); | 
 | 	} else { | 
 | 		if (res->pub.capability & WLAN_CAPABILITY_ESS) | 
 | 			regulatory_hint_found_beacon(wiphy, channel, gfp); | 
 | 	} | 
 |  | 
 | 	if (non_tx_data) { | 
 | 		/* this is a nontransmitting bss, we need to add it to | 
 | 		 * transmitting bss' list if it is not there | 
 | 		 */ | 
 | 		spin_lock_bh(&rdev->bss_lock); | 
 | 		if (cfg80211_add_nontrans_list(non_tx_data->tx_bss, | 
 | 					       &res->pub)) { | 
 | 			if (__cfg80211_unlink_bss(rdev, res)) { | 
 | 				rdev->bss_generation++; | 
 | 				res = NULL; | 
 | 			} | 
 | 		} | 
 | 		spin_unlock_bh(&rdev->bss_lock); | 
 |  | 
 | 		if (!res) | 
 | 			return NULL; | 
 | 	} | 
 |  | 
 | 	trace_cfg80211_return_bss(&res->pub); | 
 | 	/* cfg80211_bss_update gives us a referenced result */ | 
 | 	return &res->pub; | 
 | } | 
 |  | 
 | static const struct element | 
 | *cfg80211_get_profile_continuation(const u8 *ie, size_t ielen, | 
 | 				   const struct element *mbssid_elem, | 
 | 				   const struct element *sub_elem) | 
 | { | 
 | 	const u8 *mbssid_end = mbssid_elem->data + mbssid_elem->datalen; | 
 | 	const struct element *next_mbssid; | 
 | 	const struct element *next_sub; | 
 |  | 
 | 	next_mbssid = cfg80211_find_elem(WLAN_EID_MULTIPLE_BSSID, | 
 | 					 mbssid_end, | 
 | 					 ielen - (mbssid_end - ie)); | 
 |  | 
 | 	/* | 
 | 	 * If is is not the last subelement in current MBSSID IE or there isn't | 
 | 	 * a next MBSSID IE - profile is complete. | 
 | 	*/ | 
 | 	if ((sub_elem->data + sub_elem->datalen < mbssid_end - 1) || | 
 | 	    !next_mbssid) | 
 | 		return NULL; | 
 |  | 
 | 	/* For any length error, just return NULL */ | 
 |  | 
 | 	if (next_mbssid->datalen < 4) | 
 | 		return NULL; | 
 |  | 
 | 	next_sub = (void *)&next_mbssid->data[1]; | 
 |  | 
 | 	if (next_mbssid->data + next_mbssid->datalen < | 
 | 	    next_sub->data + next_sub->datalen) | 
 | 		return NULL; | 
 |  | 
 | 	if (next_sub->id != 0 || next_sub->datalen < 2) | 
 | 		return NULL; | 
 |  | 
 | 	/* | 
 | 	 * Check if the first element in the next sub element is a start | 
 | 	 * of a new profile | 
 | 	 */ | 
 | 	return next_sub->data[0] == WLAN_EID_NON_TX_BSSID_CAP ? | 
 | 	       NULL : next_mbssid; | 
 | } | 
 |  | 
 | size_t cfg80211_merge_profile(const u8 *ie, size_t ielen, | 
 | 			      const struct element *mbssid_elem, | 
 | 			      const struct element *sub_elem, | 
 | 			      u8 *merged_ie, size_t max_copy_len) | 
 | { | 
 | 	size_t copied_len = sub_elem->datalen; | 
 | 	const struct element *next_mbssid; | 
 |  | 
 | 	if (sub_elem->datalen > max_copy_len) | 
 | 		return 0; | 
 |  | 
 | 	memcpy(merged_ie, sub_elem->data, sub_elem->datalen); | 
 |  | 
 | 	while ((next_mbssid = cfg80211_get_profile_continuation(ie, ielen, | 
 | 								mbssid_elem, | 
 | 								sub_elem))) { | 
 | 		const struct element *next_sub = (void *)&next_mbssid->data[1]; | 
 |  | 
 | 		if (copied_len + next_sub->datalen > max_copy_len) | 
 | 			break; | 
 | 		memcpy(merged_ie + copied_len, next_sub->data, | 
 | 		       next_sub->datalen); | 
 | 		copied_len += next_sub->datalen; | 
 | 	} | 
 |  | 
 | 	return copied_len; | 
 | } | 
 | EXPORT_SYMBOL(cfg80211_merge_profile); | 
 |  | 
 | static void cfg80211_parse_mbssid_data(struct wiphy *wiphy, | 
 | 				       struct cfg80211_inform_bss *data, | 
 | 				       enum cfg80211_bss_frame_type ftype, | 
 | 				       const u8 *bssid, u64 tsf, | 
 | 				       u16 beacon_interval, const u8 *ie, | 
 | 				       size_t ielen, | 
 | 				       struct cfg80211_non_tx_bss *non_tx_data, | 
 | 				       gfp_t gfp) | 
 | { | 
 | 	const u8 *mbssid_index_ie; | 
 | 	const struct element *elem, *sub; | 
 | 	size_t new_ie_len; | 
 | 	u8 new_bssid[ETH_ALEN]; | 
 | 	u8 *new_ie, *profile; | 
 | 	u64 seen_indices = 0; | 
 | 	u16 capability; | 
 | 	struct cfg80211_bss *bss; | 
 |  | 
 | 	if (!non_tx_data) | 
 | 		return; | 
 | 	if (!cfg80211_find_ie(WLAN_EID_MULTIPLE_BSSID, ie, ielen)) | 
 | 		return; | 
 | 	if (!wiphy->support_mbssid) | 
 | 		return; | 
 | 	if (wiphy->support_only_he_mbssid && | 
 | 	    !cfg80211_find_ext_ie(WLAN_EID_EXT_HE_CAPABILITY, ie, ielen)) | 
 | 		return; | 
 |  | 
 | 	new_ie = kmalloc(IEEE80211_MAX_DATA_LEN, gfp); | 
 | 	if (!new_ie) | 
 | 		return; | 
 |  | 
 | 	profile = kmalloc(ielen, gfp); | 
 | 	if (!profile) | 
 | 		goto out; | 
 |  | 
 | 	for_each_element_id(elem, WLAN_EID_MULTIPLE_BSSID, ie, ielen) { | 
 | 		if (elem->datalen < 4) | 
 | 			continue; | 
 | 		if (elem->data[0] < 1 || (int)elem->data[0] > 8) | 
 | 			continue; | 
 | 		for_each_element(sub, elem->data + 1, elem->datalen - 1) { | 
 | 			u8 profile_len; | 
 |  | 
 | 			if (sub->id != 0 || sub->datalen < 4) { | 
 | 				/* not a valid BSS profile */ | 
 | 				continue; | 
 | 			} | 
 |  | 
 | 			if (sub->data[0] != WLAN_EID_NON_TX_BSSID_CAP || | 
 | 			    sub->data[1] != 2) { | 
 | 				/* The first element within the Nontransmitted | 
 | 				 * BSSID Profile is not the Nontransmitted | 
 | 				 * BSSID Capability element. | 
 | 				 */ | 
 | 				continue; | 
 | 			} | 
 |  | 
 | 			memset(profile, 0, ielen); | 
 | 			profile_len = cfg80211_merge_profile(ie, ielen, | 
 | 							     elem, | 
 | 							     sub, | 
 | 							     profile, | 
 | 							     ielen); | 
 |  | 
 | 			/* found a Nontransmitted BSSID Profile */ | 
 | 			mbssid_index_ie = cfg80211_find_ie | 
 | 				(WLAN_EID_MULTI_BSSID_IDX, | 
 | 				 profile, profile_len); | 
 | 			if (!mbssid_index_ie || mbssid_index_ie[1] < 1 || | 
 | 			    mbssid_index_ie[2] == 0 || | 
 | 			    mbssid_index_ie[2] > 46) { | 
 | 				/* No valid Multiple BSSID-Index element */ | 
 | 				continue; | 
 | 			} | 
 |  | 
 | 			if (seen_indices & BIT_ULL(mbssid_index_ie[2])) | 
 | 				/* We don't support legacy split of a profile */ | 
 | 				net_dbg_ratelimited("Partial info for BSSID index %d\n", | 
 | 						    mbssid_index_ie[2]); | 
 |  | 
 | 			seen_indices |= BIT_ULL(mbssid_index_ie[2]); | 
 |  | 
 | 			non_tx_data->bssid_index = mbssid_index_ie[2]; | 
 | 			non_tx_data->max_bssid_indicator = elem->data[0]; | 
 |  | 
 | 			cfg80211_gen_new_bssid(bssid, | 
 | 					       non_tx_data->max_bssid_indicator, | 
 | 					       non_tx_data->bssid_index, | 
 | 					       new_bssid); | 
 | 			memset(new_ie, 0, IEEE80211_MAX_DATA_LEN); | 
 | 			new_ie_len = cfg80211_gen_new_ie(ie, ielen, | 
 | 							 profile, | 
 | 							 profile_len, new_ie, | 
 | 							 IEEE80211_MAX_DATA_LEN); | 
 | 			if (!new_ie_len) | 
 | 				continue; | 
 |  | 
 | 			capability = get_unaligned_le16(profile + 2); | 
 | 			bss = cfg80211_inform_single_bss_data(wiphy, data, | 
 | 							      ftype, | 
 | 							      new_bssid, tsf, | 
 | 							      capability, | 
 | 							      beacon_interval, | 
 | 							      new_ie, | 
 | 							      new_ie_len, | 
 | 							      non_tx_data, | 
 | 							      gfp); | 
 | 			if (!bss) | 
 | 				break; | 
 | 			cfg80211_put_bss(wiphy, bss); | 
 | 		} | 
 | 	} | 
 |  | 
 | out: | 
 | 	kfree(new_ie); | 
 | 	kfree(profile); | 
 | } | 
 |  | 
 | struct cfg80211_bss * | 
 | cfg80211_inform_bss_data(struct wiphy *wiphy, | 
 | 			 struct cfg80211_inform_bss *data, | 
 | 			 enum cfg80211_bss_frame_type ftype, | 
 | 			 const u8 *bssid, u64 tsf, u16 capability, | 
 | 			 u16 beacon_interval, const u8 *ie, size_t ielen, | 
 | 			 gfp_t gfp) | 
 | { | 
 | 	struct cfg80211_bss *res; | 
 | 	struct cfg80211_non_tx_bss non_tx_data; | 
 |  | 
 | 	res = cfg80211_inform_single_bss_data(wiphy, data, ftype, bssid, tsf, | 
 | 					      capability, beacon_interval, ie, | 
 | 					      ielen, NULL, gfp); | 
 | 	if (!res) | 
 | 		return NULL; | 
 | 	non_tx_data.tx_bss = res; | 
 | 	cfg80211_parse_mbssid_data(wiphy, data, ftype, bssid, tsf, | 
 | 				   beacon_interval, ie, ielen, &non_tx_data, | 
 | 				   gfp); | 
 | 	return res; | 
 | } | 
 | EXPORT_SYMBOL(cfg80211_inform_bss_data); | 
 |  | 
 | static void | 
 | cfg80211_parse_mbssid_frame_data(struct wiphy *wiphy, | 
 | 				 struct cfg80211_inform_bss *data, | 
 | 				 struct ieee80211_mgmt *mgmt, size_t len, | 
 | 				 struct cfg80211_non_tx_bss *non_tx_data, | 
 | 				 gfp_t gfp) | 
 | { | 
 | 	enum cfg80211_bss_frame_type ftype; | 
 | 	const u8 *ie = mgmt->u.probe_resp.variable; | 
 | 	size_t ielen = len - offsetof(struct ieee80211_mgmt, | 
 | 				      u.probe_resp.variable); | 
 |  | 
 | 	ftype = ieee80211_is_beacon(mgmt->frame_control) ? | 
 | 		CFG80211_BSS_FTYPE_BEACON : CFG80211_BSS_FTYPE_PRESP; | 
 |  | 
 | 	cfg80211_parse_mbssid_data(wiphy, data, ftype, mgmt->bssid, | 
 | 				   le64_to_cpu(mgmt->u.probe_resp.timestamp), | 
 | 				   le16_to_cpu(mgmt->u.probe_resp.beacon_int), | 
 | 				   ie, ielen, non_tx_data, gfp); | 
 | } | 
 |  | 
 | static void | 
 | cfg80211_update_notlisted_nontrans(struct wiphy *wiphy, | 
 | 				   struct cfg80211_bss *nontrans_bss, | 
 | 				   struct ieee80211_mgmt *mgmt, size_t len) | 
 | { | 
 | 	u8 *ie, *new_ie, *pos; | 
 | 	const u8 *nontrans_ssid, *trans_ssid, *mbssid; | 
 | 	size_t ielen = len - offsetof(struct ieee80211_mgmt, | 
 | 				      u.probe_resp.variable); | 
 | 	size_t new_ie_len; | 
 | 	struct cfg80211_bss_ies *new_ies; | 
 | 	const struct cfg80211_bss_ies *old; | 
 | 	size_t cpy_len; | 
 |  | 
 | 	lockdep_assert_held(&wiphy_to_rdev(wiphy)->bss_lock); | 
 |  | 
 | 	ie = mgmt->u.probe_resp.variable; | 
 |  | 
 | 	new_ie_len = ielen; | 
 | 	trans_ssid = cfg80211_find_ie(WLAN_EID_SSID, ie, ielen); | 
 | 	if (!trans_ssid) | 
 | 		return; | 
 | 	new_ie_len -= trans_ssid[1]; | 
 | 	mbssid = cfg80211_find_ie(WLAN_EID_MULTIPLE_BSSID, ie, ielen); | 
 | 	/* | 
 | 	 * It's not valid to have the MBSSID element before SSID | 
 | 	 * ignore if that happens - the code below assumes it is | 
 | 	 * after (while copying things inbetween). | 
 | 	 */ | 
 | 	if (!mbssid || mbssid < trans_ssid) | 
 | 		return; | 
 | 	new_ie_len -= mbssid[1]; | 
 |  | 
 | 	nontrans_ssid = ieee80211_bss_get_ie(nontrans_bss, WLAN_EID_SSID); | 
 | 	if (!nontrans_ssid) | 
 | 		return; | 
 |  | 
 | 	new_ie_len += nontrans_ssid[1]; | 
 |  | 
 | 	/* generate new ie for nontrans BSS | 
 | 	 * 1. replace SSID with nontrans BSS' SSID | 
 | 	 * 2. skip MBSSID IE | 
 | 	 */ | 
 | 	new_ie = kzalloc(new_ie_len, GFP_ATOMIC); | 
 | 	if (!new_ie) | 
 | 		return; | 
 |  | 
 | 	new_ies = kzalloc(sizeof(*new_ies) + new_ie_len, GFP_ATOMIC); | 
 | 	if (!new_ies) | 
 | 		goto out_free; | 
 |  | 
 | 	pos = new_ie; | 
 |  | 
 | 	/* copy the nontransmitted SSID */ | 
 | 	cpy_len = nontrans_ssid[1] + 2; | 
 | 	memcpy(pos, nontrans_ssid, cpy_len); | 
 | 	pos += cpy_len; | 
 | 	/* copy the IEs between SSID and MBSSID */ | 
 | 	cpy_len = trans_ssid[1] + 2; | 
 | 	memcpy(pos, (trans_ssid + cpy_len), (mbssid - (trans_ssid + cpy_len))); | 
 | 	pos += (mbssid - (trans_ssid + cpy_len)); | 
 | 	/* copy the IEs after MBSSID */ | 
 | 	cpy_len = mbssid[1] + 2; | 
 | 	memcpy(pos, mbssid + cpy_len, ((ie + ielen) - (mbssid + cpy_len))); | 
 |  | 
 | 	/* update ie */ | 
 | 	new_ies->len = new_ie_len; | 
 | 	new_ies->tsf = le64_to_cpu(mgmt->u.probe_resp.timestamp); | 
 | 	new_ies->from_beacon = ieee80211_is_beacon(mgmt->frame_control); | 
 | 	memcpy(new_ies->data, new_ie, new_ie_len); | 
 | 	if (ieee80211_is_probe_resp(mgmt->frame_control)) { | 
 | 		old = rcu_access_pointer(nontrans_bss->proberesp_ies); | 
 | 		rcu_assign_pointer(nontrans_bss->proberesp_ies, new_ies); | 
 | 		rcu_assign_pointer(nontrans_bss->ies, new_ies); | 
 | 		if (old) | 
 | 			kfree_rcu((struct cfg80211_bss_ies *)old, rcu_head); | 
 | 	} else { | 
 | 		old = rcu_access_pointer(nontrans_bss->beacon_ies); | 
 | 		rcu_assign_pointer(nontrans_bss->beacon_ies, new_ies); | 
 | 		cfg80211_update_hidden_bsses(bss_from_pub(nontrans_bss), | 
 | 					     new_ies, old); | 
 | 		rcu_assign_pointer(nontrans_bss->ies, new_ies); | 
 | 		if (old) | 
 | 			kfree_rcu((struct cfg80211_bss_ies *)old, rcu_head); | 
 | 	} | 
 |  | 
 | out_free: | 
 | 	kfree(new_ie); | 
 | } | 
 |  | 
 | /* cfg80211_inform_bss_width_frame helper */ | 
 | static struct cfg80211_bss * | 
 | cfg80211_inform_single_bss_frame_data(struct wiphy *wiphy, | 
 | 				      struct cfg80211_inform_bss *data, | 
 | 				      struct ieee80211_mgmt *mgmt, size_t len, | 
 | 				      gfp_t gfp) | 
 | { | 
 | 	struct cfg80211_internal_bss tmp = {}, *res; | 
 | 	struct cfg80211_bss_ies *ies; | 
 | 	struct ieee80211_channel *channel; | 
 | 	bool signal_valid; | 
 | 	size_t ielen = len - offsetof(struct ieee80211_mgmt, | 
 | 				      u.probe_resp.variable); | 
 | 	int bss_type; | 
 |  | 
 | 	BUILD_BUG_ON(offsetof(struct ieee80211_mgmt, u.probe_resp.variable) != | 
 | 			offsetof(struct ieee80211_mgmt, u.beacon.variable)); | 
 |  | 
 | 	trace_cfg80211_inform_bss_frame(wiphy, data, mgmt, len); | 
 |  | 
 | 	if (WARN_ON(!mgmt)) | 
 | 		return NULL; | 
 |  | 
 | 	if (WARN_ON(!wiphy)) | 
 | 		return NULL; | 
 |  | 
 | 	if (WARN_ON(wiphy->signal_type == CFG80211_SIGNAL_TYPE_UNSPEC && | 
 | 		    (data->signal < 0 || data->signal > 100))) | 
 | 		return NULL; | 
 |  | 
 | 	if (WARN_ON(len < offsetof(struct ieee80211_mgmt, u.probe_resp.variable))) | 
 | 		return NULL; | 
 |  | 
 | 	channel = cfg80211_get_bss_channel(wiphy, mgmt->u.beacon.variable, | 
 | 					   ielen, data->chan, data->scan_width); | 
 | 	if (!channel) | 
 | 		return NULL; | 
 |  | 
 | 	ies = kzalloc(sizeof(*ies) + ielen, gfp); | 
 | 	if (!ies) | 
 | 		return NULL; | 
 | 	ies->len = ielen; | 
 | 	ies->tsf = le64_to_cpu(mgmt->u.probe_resp.timestamp); | 
 | 	ies->from_beacon = ieee80211_is_beacon(mgmt->frame_control); | 
 | 	memcpy(ies->data, mgmt->u.probe_resp.variable, ielen); | 
 |  | 
 | 	if (ieee80211_is_probe_resp(mgmt->frame_control)) | 
 | 		rcu_assign_pointer(tmp.pub.proberesp_ies, ies); | 
 | 	else | 
 | 		rcu_assign_pointer(tmp.pub.beacon_ies, ies); | 
 | 	rcu_assign_pointer(tmp.pub.ies, ies); | 
 |  | 
 | 	memcpy(tmp.pub.bssid, mgmt->bssid, ETH_ALEN); | 
 | 	tmp.pub.channel = channel; | 
 | 	tmp.pub.scan_width = data->scan_width; | 
 | 	tmp.pub.signal = data->signal; | 
 | 	tmp.pub.beacon_interval = le16_to_cpu(mgmt->u.probe_resp.beacon_int); | 
 | 	tmp.pub.capability = le16_to_cpu(mgmt->u.probe_resp.capab_info); | 
 | 	tmp.ts_boottime = data->boottime_ns; | 
 | 	tmp.parent_tsf = data->parent_tsf; | 
 | 	tmp.pub.chains = data->chains; | 
 | 	memcpy(tmp.pub.chain_signal, data->chain_signal, IEEE80211_MAX_CHAINS); | 
 | 	ether_addr_copy(tmp.parent_bssid, data->parent_bssid); | 
 |  | 
 | 	signal_valid = abs(data->chan->center_freq - channel->center_freq) <= | 
 | 		wiphy->max_adj_channel_rssi_comp; | 
 | 	res = cfg80211_bss_update(wiphy_to_rdev(wiphy), &tmp, signal_valid, | 
 | 				  jiffies); | 
 | 	if (!res) | 
 | 		return NULL; | 
 |  | 
 | 	if (channel->band == NL80211_BAND_60GHZ) { | 
 | 		bss_type = res->pub.capability & WLAN_CAPABILITY_DMG_TYPE_MASK; | 
 | 		if (bss_type == WLAN_CAPABILITY_DMG_TYPE_AP || | 
 | 		    bss_type == WLAN_CAPABILITY_DMG_TYPE_PBSS) | 
 | 			regulatory_hint_found_beacon(wiphy, channel, gfp); | 
 | 	} else { | 
 | 		if (res->pub.capability & WLAN_CAPABILITY_ESS) | 
 | 			regulatory_hint_found_beacon(wiphy, channel, gfp); | 
 | 	} | 
 |  | 
 | 	trace_cfg80211_return_bss(&res->pub); | 
 | 	/* cfg80211_bss_update gives us a referenced result */ | 
 | 	return &res->pub; | 
 | } | 
 |  | 
 | struct cfg80211_bss * | 
 | cfg80211_inform_bss_frame_data(struct wiphy *wiphy, | 
 | 			       struct cfg80211_inform_bss *data, | 
 | 			       struct ieee80211_mgmt *mgmt, size_t len, | 
 | 			       gfp_t gfp) | 
 | { | 
 | 	struct cfg80211_bss *res, *tmp_bss; | 
 | 	const u8 *ie = mgmt->u.probe_resp.variable; | 
 | 	const struct cfg80211_bss_ies *ies1, *ies2; | 
 | 	size_t ielen = len - offsetof(struct ieee80211_mgmt, | 
 | 				      u.probe_resp.variable); | 
 | 	struct cfg80211_non_tx_bss non_tx_data; | 
 |  | 
 | 	res = cfg80211_inform_single_bss_frame_data(wiphy, data, mgmt, | 
 | 						    len, gfp); | 
 | 	if (!res || !wiphy->support_mbssid || | 
 | 	    !cfg80211_find_ie(WLAN_EID_MULTIPLE_BSSID, ie, ielen)) | 
 | 		return res; | 
 | 	if (wiphy->support_only_he_mbssid && | 
 | 	    !cfg80211_find_ext_ie(WLAN_EID_EXT_HE_CAPABILITY, ie, ielen)) | 
 | 		return res; | 
 |  | 
 | 	non_tx_data.tx_bss = res; | 
 | 	/* process each non-transmitting bss */ | 
 | 	cfg80211_parse_mbssid_frame_data(wiphy, data, mgmt, len, | 
 | 					 &non_tx_data, gfp); | 
 |  | 
 | 	spin_lock_bh(&wiphy_to_rdev(wiphy)->bss_lock); | 
 |  | 
 | 	/* check if the res has other nontransmitting bss which is not | 
 | 	 * in MBSSID IE | 
 | 	 */ | 
 | 	ies1 = rcu_access_pointer(res->ies); | 
 |  | 
 | 	/* go through nontrans_list, if the timestamp of the BSS is | 
 | 	 * earlier than the timestamp of the transmitting BSS then | 
 | 	 * update it | 
 | 	 */ | 
 | 	list_for_each_entry(tmp_bss, &res->nontrans_list, | 
 | 			    nontrans_list) { | 
 | 		ies2 = rcu_access_pointer(tmp_bss->ies); | 
 | 		if (ies2->tsf < ies1->tsf) | 
 | 			cfg80211_update_notlisted_nontrans(wiphy, tmp_bss, | 
 | 							   mgmt, len); | 
 | 	} | 
 | 	spin_unlock_bh(&wiphy_to_rdev(wiphy)->bss_lock); | 
 |  | 
 | 	return res; | 
 | } | 
 | EXPORT_SYMBOL(cfg80211_inform_bss_frame_data); | 
 |  | 
 | void cfg80211_ref_bss(struct wiphy *wiphy, struct cfg80211_bss *pub) | 
 | { | 
 | 	struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy); | 
 | 	struct cfg80211_internal_bss *bss; | 
 |  | 
 | 	if (!pub) | 
 | 		return; | 
 |  | 
 | 	bss = container_of(pub, struct cfg80211_internal_bss, pub); | 
 |  | 
 | 	spin_lock_bh(&rdev->bss_lock); | 
 | 	bss_ref_get(rdev, bss); | 
 | 	spin_unlock_bh(&rdev->bss_lock); | 
 | } | 
 | EXPORT_SYMBOL(cfg80211_ref_bss); | 
 |  | 
 | void cfg80211_put_bss(struct wiphy *wiphy, struct cfg80211_bss *pub) | 
 | { | 
 | 	struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy); | 
 | 	struct cfg80211_internal_bss *bss; | 
 |  | 
 | 	if (!pub) | 
 | 		return; | 
 |  | 
 | 	bss = container_of(pub, struct cfg80211_internal_bss, pub); | 
 |  | 
 | 	spin_lock_bh(&rdev->bss_lock); | 
 | 	bss_ref_put(rdev, bss); | 
 | 	spin_unlock_bh(&rdev->bss_lock); | 
 | } | 
 | EXPORT_SYMBOL(cfg80211_put_bss); | 
 |  | 
 | void cfg80211_unlink_bss(struct wiphy *wiphy, struct cfg80211_bss *pub) | 
 | { | 
 | 	struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy); | 
 | 	struct cfg80211_internal_bss *bss, *tmp1; | 
 | 	struct cfg80211_bss *nontrans_bss, *tmp; | 
 |  | 
 | 	if (WARN_ON(!pub)) | 
 | 		return; | 
 |  | 
 | 	bss = container_of(pub, struct cfg80211_internal_bss, pub); | 
 |  | 
 | 	spin_lock_bh(&rdev->bss_lock); | 
 | 	if (list_empty(&bss->list)) | 
 | 		goto out; | 
 |  | 
 | 	list_for_each_entry_safe(nontrans_bss, tmp, | 
 | 				 &pub->nontrans_list, | 
 | 				 nontrans_list) { | 
 | 		tmp1 = container_of(nontrans_bss, | 
 | 				    struct cfg80211_internal_bss, pub); | 
 | 		if (__cfg80211_unlink_bss(rdev, tmp1)) | 
 | 			rdev->bss_generation++; | 
 | 	} | 
 |  | 
 | 	if (__cfg80211_unlink_bss(rdev, bss)) | 
 | 		rdev->bss_generation++; | 
 | out: | 
 | 	spin_unlock_bh(&rdev->bss_lock); | 
 | } | 
 | EXPORT_SYMBOL(cfg80211_unlink_bss); | 
 |  | 
 | void cfg80211_bss_iter(struct wiphy *wiphy, | 
 | 		       struct cfg80211_chan_def *chandef, | 
 | 		       void (*iter)(struct wiphy *wiphy, | 
 | 				    struct cfg80211_bss *bss, | 
 | 				    void *data), | 
 | 		       void *iter_data) | 
 | { | 
 | 	struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy); | 
 | 	struct cfg80211_internal_bss *bss; | 
 |  | 
 | 	spin_lock_bh(&rdev->bss_lock); | 
 |  | 
 | 	list_for_each_entry(bss, &rdev->bss_list, list) { | 
 | 		if (!chandef || cfg80211_is_sub_chan(chandef, bss->pub.channel)) | 
 | 			iter(wiphy, &bss->pub, iter_data); | 
 | 	} | 
 |  | 
 | 	spin_unlock_bh(&rdev->bss_lock); | 
 | } | 
 | EXPORT_SYMBOL(cfg80211_bss_iter); | 
 |  | 
 | void cfg80211_update_assoc_bss_entry(struct wireless_dev *wdev, | 
 | 				     struct ieee80211_channel *chan) | 
 | { | 
 | 	struct wiphy *wiphy = wdev->wiphy; | 
 | 	struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy); | 
 | 	struct cfg80211_internal_bss *cbss = wdev->current_bss; | 
 | 	struct cfg80211_internal_bss *new = NULL; | 
 | 	struct cfg80211_internal_bss *bss; | 
 | 	struct cfg80211_bss *nontrans_bss; | 
 | 	struct cfg80211_bss *tmp; | 
 |  | 
 | 	spin_lock_bh(&rdev->bss_lock); | 
 |  | 
 | 	/* | 
 | 	 * Some APs use CSA also for bandwidth changes, i.e., without actually | 
 | 	 * changing the control channel, so no need to update in such a case. | 
 | 	 */ | 
 | 	if (cbss->pub.channel == chan) | 
 | 		goto done; | 
 |  | 
 | 	/* use transmitting bss */ | 
 | 	if (cbss->pub.transmitted_bss) | 
 | 		cbss = container_of(cbss->pub.transmitted_bss, | 
 | 				    struct cfg80211_internal_bss, | 
 | 				    pub); | 
 |  | 
 | 	cbss->pub.channel = chan; | 
 |  | 
 | 	list_for_each_entry(bss, &rdev->bss_list, list) { | 
 | 		if (!cfg80211_bss_type_match(bss->pub.capability, | 
 | 					     bss->pub.channel->band, | 
 | 					     wdev->conn_bss_type)) | 
 | 			continue; | 
 |  | 
 | 		if (bss == cbss) | 
 | 			continue; | 
 |  | 
 | 		if (!cmp_bss(&bss->pub, &cbss->pub, BSS_CMP_REGULAR)) { | 
 | 			new = bss; | 
 | 			break; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (new) { | 
 | 		/* to save time, update IEs for transmitting bss only */ | 
 | 		if (cfg80211_update_known_bss(rdev, cbss, new, false)) { | 
 | 			new->pub.proberesp_ies = NULL; | 
 | 			new->pub.beacon_ies = NULL; | 
 | 		} | 
 |  | 
 | 		list_for_each_entry_safe(nontrans_bss, tmp, | 
 | 					 &new->pub.nontrans_list, | 
 | 					 nontrans_list) { | 
 | 			bss = container_of(nontrans_bss, | 
 | 					   struct cfg80211_internal_bss, pub); | 
 | 			if (__cfg80211_unlink_bss(rdev, bss)) | 
 | 				rdev->bss_generation++; | 
 | 		} | 
 |  | 
 | 		WARN_ON(atomic_read(&new->hold)); | 
 | 		if (!WARN_ON(!__cfg80211_unlink_bss(rdev, new))) | 
 | 			rdev->bss_generation++; | 
 | 	} | 
 | 	cfg80211_rehash_bss(rdev, cbss); | 
 |  | 
 | 	list_for_each_entry_safe(nontrans_bss, tmp, | 
 | 				 &cbss->pub.nontrans_list, | 
 | 				 nontrans_list) { | 
 | 		bss = container_of(nontrans_bss, | 
 | 				   struct cfg80211_internal_bss, pub); | 
 | 		bss->pub.channel = chan; | 
 | 		cfg80211_rehash_bss(rdev, bss); | 
 | 	} | 
 |  | 
 | done: | 
 | 	spin_unlock_bh(&rdev->bss_lock); | 
 | } | 
 |  | 
 | #ifdef CONFIG_CFG80211_WEXT | 
 | static struct cfg80211_registered_device * | 
 | cfg80211_get_dev_from_ifindex(struct net *net, int ifindex) | 
 | { | 
 | 	struct cfg80211_registered_device *rdev; | 
 | 	struct net_device *dev; | 
 |  | 
 | 	ASSERT_RTNL(); | 
 |  | 
 | 	dev = dev_get_by_index(net, ifindex); | 
 | 	if (!dev) | 
 | 		return ERR_PTR(-ENODEV); | 
 | 	if (dev->ieee80211_ptr) | 
 | 		rdev = wiphy_to_rdev(dev->ieee80211_ptr->wiphy); | 
 | 	else | 
 | 		rdev = ERR_PTR(-ENODEV); | 
 | 	dev_put(dev); | 
 | 	return rdev; | 
 | } | 
 |  | 
 | int cfg80211_wext_siwscan(struct net_device *dev, | 
 | 			  struct iw_request_info *info, | 
 | 			  union iwreq_data *wrqu, char *extra) | 
 | { | 
 | 	struct cfg80211_registered_device *rdev; | 
 | 	struct wiphy *wiphy; | 
 | 	struct iw_scan_req *wreq = NULL; | 
 | 	struct cfg80211_scan_request *creq = NULL; | 
 | 	int i, err, n_channels = 0; | 
 | 	enum nl80211_band band; | 
 |  | 
 | 	if (!netif_running(dev)) | 
 | 		return -ENETDOWN; | 
 |  | 
 | 	if (wrqu->data.length == sizeof(struct iw_scan_req)) | 
 | 		wreq = (struct iw_scan_req *)extra; | 
 |  | 
 | 	rdev = cfg80211_get_dev_from_ifindex(dev_net(dev), dev->ifindex); | 
 |  | 
 | 	if (IS_ERR(rdev)) | 
 | 		return PTR_ERR(rdev); | 
 |  | 
 | 	if (rdev->scan_req || rdev->scan_msg) { | 
 | 		err = -EBUSY; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	wiphy = &rdev->wiphy; | 
 |  | 
 | 	/* Determine number of channels, needed to allocate creq */ | 
 | 	if (wreq && wreq->num_channels) { | 
 | 		/* Passed from userspace so should be checked */ | 
 | 		if (unlikely(wreq->num_channels > IW_MAX_FREQUENCIES)) | 
 | 			return -EINVAL; | 
 | 		n_channels = wreq->num_channels; | 
 | 	} else { | 
 | 		n_channels = ieee80211_get_num_supported_channels(wiphy); | 
 | 	} | 
 |  | 
 | 	creq = kzalloc(struct_size(creq, channels, n_channels) + | 
 | 		       sizeof(struct cfg80211_ssid), | 
 | 		       GFP_ATOMIC); | 
 | 	if (!creq) { | 
 | 		err = -ENOMEM; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	creq->wiphy = wiphy; | 
 | 	creq->wdev = dev->ieee80211_ptr; | 
 | 	/* SSIDs come after channels */ | 
 | 	creq->ssids = (void *)creq + struct_size(creq, channels, n_channels); | 
 | 	creq->n_channels = n_channels; | 
 | 	creq->n_ssids = 1; | 
 | 	creq->scan_start = jiffies; | 
 |  | 
 | 	/* translate "Scan on frequencies" request */ | 
 | 	i = 0; | 
 | 	for (band = 0; band < NUM_NL80211_BANDS; band++) { | 
 | 		int j; | 
 |  | 
 | 		if (!wiphy->bands[band]) | 
 | 			continue; | 
 |  | 
 | 		for (j = 0; j < wiphy->bands[band]->n_channels; j++) { | 
 | 			/* ignore disabled channels */ | 
 | 			if (wiphy->bands[band]->channels[j].flags & | 
 | 						IEEE80211_CHAN_DISABLED) | 
 | 				continue; | 
 |  | 
 | 			/* If we have a wireless request structure and the | 
 | 			 * wireless request specifies frequencies, then search | 
 | 			 * for the matching hardware channel. | 
 | 			 */ | 
 | 			if (wreq && wreq->num_channels) { | 
 | 				int k; | 
 | 				int wiphy_freq = wiphy->bands[band]->channels[j].center_freq; | 
 | 				for (k = 0; k < wreq->num_channels; k++) { | 
 | 					struct iw_freq *freq = | 
 | 						&wreq->channel_list[k]; | 
 | 					int wext_freq = | 
 | 						cfg80211_wext_freq(freq); | 
 |  | 
 | 					if (wext_freq == wiphy_freq) | 
 | 						goto wext_freq_found; | 
 | 				} | 
 | 				goto wext_freq_not_found; | 
 | 			} | 
 |  | 
 | 		wext_freq_found: | 
 | 			creq->channels[i] = &wiphy->bands[band]->channels[j]; | 
 | 			i++; | 
 | 		wext_freq_not_found: ; | 
 | 		} | 
 | 	} | 
 | 	/* No channels found? */ | 
 | 	if (!i) { | 
 | 		err = -EINVAL; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	/* Set real number of channels specified in creq->channels[] */ | 
 | 	creq->n_channels = i; | 
 |  | 
 | 	/* translate "Scan for SSID" request */ | 
 | 	if (wreq) { | 
 | 		if (wrqu->data.flags & IW_SCAN_THIS_ESSID) { | 
 | 			if (wreq->essid_len > IEEE80211_MAX_SSID_LEN) { | 
 | 				err = -EINVAL; | 
 | 				goto out; | 
 | 			} | 
 | 			memcpy(creq->ssids[0].ssid, wreq->essid, wreq->essid_len); | 
 | 			creq->ssids[0].ssid_len = wreq->essid_len; | 
 | 		} | 
 | 		if (wreq->scan_type == IW_SCAN_TYPE_PASSIVE) | 
 | 			creq->n_ssids = 0; | 
 | 	} | 
 |  | 
 | 	for (i = 0; i < NUM_NL80211_BANDS; i++) | 
 | 		if (wiphy->bands[i]) | 
 | 			creq->rates[i] = (1 << wiphy->bands[i]->n_bitrates) - 1; | 
 |  | 
 | 	eth_broadcast_addr(creq->bssid); | 
 |  | 
 | 	rdev->scan_req = creq; | 
 | 	err = rdev_scan(rdev, creq); | 
 | 	if (err) { | 
 | 		rdev->scan_req = NULL; | 
 | 		/* creq will be freed below */ | 
 | 	} else { | 
 | 		nl80211_send_scan_start(rdev, dev->ieee80211_ptr); | 
 | 		/* creq now owned by driver */ | 
 | 		creq = NULL; | 
 | 		dev_hold(dev); | 
 | 	} | 
 |  out: | 
 | 	kfree(creq); | 
 | 	return err; | 
 | } | 
 | EXPORT_WEXT_HANDLER(cfg80211_wext_siwscan); | 
 |  | 
 | static char *ieee80211_scan_add_ies(struct iw_request_info *info, | 
 | 				    const struct cfg80211_bss_ies *ies, | 
 | 				    char *current_ev, char *end_buf) | 
 | { | 
 | 	const u8 *pos, *end, *next; | 
 | 	struct iw_event iwe; | 
 |  | 
 | 	if (!ies) | 
 | 		return current_ev; | 
 |  | 
 | 	/* | 
 | 	 * If needed, fragment the IEs buffer (at IE boundaries) into short | 
 | 	 * enough fragments to fit into IW_GENERIC_IE_MAX octet messages. | 
 | 	 */ | 
 | 	pos = ies->data; | 
 | 	end = pos + ies->len; | 
 |  | 
 | 	while (end - pos > IW_GENERIC_IE_MAX) { | 
 | 		next = pos + 2 + pos[1]; | 
 | 		while (next + 2 + next[1] - pos < IW_GENERIC_IE_MAX) | 
 | 			next = next + 2 + next[1]; | 
 |  | 
 | 		memset(&iwe, 0, sizeof(iwe)); | 
 | 		iwe.cmd = IWEVGENIE; | 
 | 		iwe.u.data.length = next - pos; | 
 | 		current_ev = iwe_stream_add_point_check(info, current_ev, | 
 | 							end_buf, &iwe, | 
 | 							(void *)pos); | 
 | 		if (IS_ERR(current_ev)) | 
 | 			return current_ev; | 
 | 		pos = next; | 
 | 	} | 
 |  | 
 | 	if (end > pos) { | 
 | 		memset(&iwe, 0, sizeof(iwe)); | 
 | 		iwe.cmd = IWEVGENIE; | 
 | 		iwe.u.data.length = end - pos; | 
 | 		current_ev = iwe_stream_add_point_check(info, current_ev, | 
 | 							end_buf, &iwe, | 
 | 							(void *)pos); | 
 | 		if (IS_ERR(current_ev)) | 
 | 			return current_ev; | 
 | 	} | 
 |  | 
 | 	return current_ev; | 
 | } | 
 |  | 
 | static char * | 
 | ieee80211_bss(struct wiphy *wiphy, struct iw_request_info *info, | 
 | 	      struct cfg80211_internal_bss *bss, char *current_ev, | 
 | 	      char *end_buf) | 
 | { | 
 | 	const struct cfg80211_bss_ies *ies; | 
 | 	struct iw_event iwe; | 
 | 	const u8 *ie; | 
 | 	u8 buf[50]; | 
 | 	u8 *cfg, *p, *tmp; | 
 | 	int rem, i, sig; | 
 | 	bool ismesh = false; | 
 |  | 
 | 	memset(&iwe, 0, sizeof(iwe)); | 
 | 	iwe.cmd = SIOCGIWAP; | 
 | 	iwe.u.ap_addr.sa_family = ARPHRD_ETHER; | 
 | 	memcpy(iwe.u.ap_addr.sa_data, bss->pub.bssid, ETH_ALEN); | 
 | 	current_ev = iwe_stream_add_event_check(info, current_ev, end_buf, &iwe, | 
 | 						IW_EV_ADDR_LEN); | 
 | 	if (IS_ERR(current_ev)) | 
 | 		return current_ev; | 
 |  | 
 | 	memset(&iwe, 0, sizeof(iwe)); | 
 | 	iwe.cmd = SIOCGIWFREQ; | 
 | 	iwe.u.freq.m = ieee80211_frequency_to_channel(bss->pub.channel->center_freq); | 
 | 	iwe.u.freq.e = 0; | 
 | 	current_ev = iwe_stream_add_event_check(info, current_ev, end_buf, &iwe, | 
 | 						IW_EV_FREQ_LEN); | 
 | 	if (IS_ERR(current_ev)) | 
 | 		return current_ev; | 
 |  | 
 | 	memset(&iwe, 0, sizeof(iwe)); | 
 | 	iwe.cmd = SIOCGIWFREQ; | 
 | 	iwe.u.freq.m = bss->pub.channel->center_freq; | 
 | 	iwe.u.freq.e = 6; | 
 | 	current_ev = iwe_stream_add_event_check(info, current_ev, end_buf, &iwe, | 
 | 						IW_EV_FREQ_LEN); | 
 | 	if (IS_ERR(current_ev)) | 
 | 		return current_ev; | 
 |  | 
 | 	if (wiphy->signal_type != CFG80211_SIGNAL_TYPE_NONE) { | 
 | 		memset(&iwe, 0, sizeof(iwe)); | 
 | 		iwe.cmd = IWEVQUAL; | 
 | 		iwe.u.qual.updated = IW_QUAL_LEVEL_UPDATED | | 
 | 				     IW_QUAL_NOISE_INVALID | | 
 | 				     IW_QUAL_QUAL_UPDATED; | 
 | 		switch (wiphy->signal_type) { | 
 | 		case CFG80211_SIGNAL_TYPE_MBM: | 
 | 			sig = bss->pub.signal / 100; | 
 | 			iwe.u.qual.level = sig; | 
 | 			iwe.u.qual.updated |= IW_QUAL_DBM; | 
 | 			if (sig < -110)		/* rather bad */ | 
 | 				sig = -110; | 
 | 			else if (sig > -40)	/* perfect */ | 
 | 				sig = -40; | 
 | 			/* will give a range of 0 .. 70 */ | 
 | 			iwe.u.qual.qual = sig + 110; | 
 | 			break; | 
 | 		case CFG80211_SIGNAL_TYPE_UNSPEC: | 
 | 			iwe.u.qual.level = bss->pub.signal; | 
 | 			/* will give range 0 .. 100 */ | 
 | 			iwe.u.qual.qual = bss->pub.signal; | 
 | 			break; | 
 | 		default: | 
 | 			/* not reached */ | 
 | 			break; | 
 | 		} | 
 | 		current_ev = iwe_stream_add_event_check(info, current_ev, | 
 | 							end_buf, &iwe, | 
 | 							IW_EV_QUAL_LEN); | 
 | 		if (IS_ERR(current_ev)) | 
 | 			return current_ev; | 
 | 	} | 
 |  | 
 | 	memset(&iwe, 0, sizeof(iwe)); | 
 | 	iwe.cmd = SIOCGIWENCODE; | 
 | 	if (bss->pub.capability & WLAN_CAPABILITY_PRIVACY) | 
 | 		iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY; | 
 | 	else | 
 | 		iwe.u.data.flags = IW_ENCODE_DISABLED; | 
 | 	iwe.u.data.length = 0; | 
 | 	current_ev = iwe_stream_add_point_check(info, current_ev, end_buf, | 
 | 						&iwe, ""); | 
 | 	if (IS_ERR(current_ev)) | 
 | 		return current_ev; | 
 |  | 
 | 	rcu_read_lock(); | 
 | 	ies = rcu_dereference(bss->pub.ies); | 
 | 	rem = ies->len; | 
 | 	ie = ies->data; | 
 |  | 
 | 	while (rem >= 2) { | 
 | 		/* invalid data */ | 
 | 		if (ie[1] > rem - 2) | 
 | 			break; | 
 |  | 
 | 		switch (ie[0]) { | 
 | 		case WLAN_EID_SSID: | 
 | 			memset(&iwe, 0, sizeof(iwe)); | 
 | 			iwe.cmd = SIOCGIWESSID; | 
 | 			iwe.u.data.length = ie[1]; | 
 | 			iwe.u.data.flags = 1; | 
 | 			current_ev = iwe_stream_add_point_check(info, | 
 | 								current_ev, | 
 | 								end_buf, &iwe, | 
 | 								(u8 *)ie + 2); | 
 | 			if (IS_ERR(current_ev)) | 
 | 				goto unlock; | 
 | 			break; | 
 | 		case WLAN_EID_MESH_ID: | 
 | 			memset(&iwe, 0, sizeof(iwe)); | 
 | 			iwe.cmd = SIOCGIWESSID; | 
 | 			iwe.u.data.length = ie[1]; | 
 | 			iwe.u.data.flags = 1; | 
 | 			current_ev = iwe_stream_add_point_check(info, | 
 | 								current_ev, | 
 | 								end_buf, &iwe, | 
 | 								(u8 *)ie + 2); | 
 | 			if (IS_ERR(current_ev)) | 
 | 				goto unlock; | 
 | 			break; | 
 | 		case WLAN_EID_MESH_CONFIG: | 
 | 			ismesh = true; | 
 | 			if (ie[1] != sizeof(struct ieee80211_meshconf_ie)) | 
 | 				break; | 
 | 			cfg = (u8 *)ie + 2; | 
 | 			memset(&iwe, 0, sizeof(iwe)); | 
 | 			iwe.cmd = IWEVCUSTOM; | 
 | 			sprintf(buf, "Mesh Network Path Selection Protocol ID: " | 
 | 				"0x%02X", cfg[0]); | 
 | 			iwe.u.data.length = strlen(buf); | 
 | 			current_ev = iwe_stream_add_point_check(info, | 
 | 								current_ev, | 
 | 								end_buf, | 
 | 								&iwe, buf); | 
 | 			if (IS_ERR(current_ev)) | 
 | 				goto unlock; | 
 | 			sprintf(buf, "Path Selection Metric ID: 0x%02X", | 
 | 				cfg[1]); | 
 | 			iwe.u.data.length = strlen(buf); | 
 | 			current_ev = iwe_stream_add_point_check(info, | 
 | 								current_ev, | 
 | 								end_buf, | 
 | 								&iwe, buf); | 
 | 			if (IS_ERR(current_ev)) | 
 | 				goto unlock; | 
 | 			sprintf(buf, "Congestion Control Mode ID: 0x%02X", | 
 | 				cfg[2]); | 
 | 			iwe.u.data.length = strlen(buf); | 
 | 			current_ev = iwe_stream_add_point_check(info, | 
 | 								current_ev, | 
 | 								end_buf, | 
 | 								&iwe, buf); | 
 | 			if (IS_ERR(current_ev)) | 
 | 				goto unlock; | 
 | 			sprintf(buf, "Synchronization ID: 0x%02X", cfg[3]); | 
 | 			iwe.u.data.length = strlen(buf); | 
 | 			current_ev = iwe_stream_add_point_check(info, | 
 | 								current_ev, | 
 | 								end_buf, | 
 | 								&iwe, buf); | 
 | 			if (IS_ERR(current_ev)) | 
 | 				goto unlock; | 
 | 			sprintf(buf, "Authentication ID: 0x%02X", cfg[4]); | 
 | 			iwe.u.data.length = strlen(buf); | 
 | 			current_ev = iwe_stream_add_point_check(info, | 
 | 								current_ev, | 
 | 								end_buf, | 
 | 								&iwe, buf); | 
 | 			if (IS_ERR(current_ev)) | 
 | 				goto unlock; | 
 | 			sprintf(buf, "Formation Info: 0x%02X", cfg[5]); | 
 | 			iwe.u.data.length = strlen(buf); | 
 | 			current_ev = iwe_stream_add_point_check(info, | 
 | 								current_ev, | 
 | 								end_buf, | 
 | 								&iwe, buf); | 
 | 			if (IS_ERR(current_ev)) | 
 | 				goto unlock; | 
 | 			sprintf(buf, "Capabilities: 0x%02X", cfg[6]); | 
 | 			iwe.u.data.length = strlen(buf); | 
 | 			current_ev = iwe_stream_add_point_check(info, | 
 | 								current_ev, | 
 | 								end_buf, | 
 | 								&iwe, buf); | 
 | 			if (IS_ERR(current_ev)) | 
 | 				goto unlock; | 
 | 			break; | 
 | 		case WLAN_EID_SUPP_RATES: | 
 | 		case WLAN_EID_EXT_SUPP_RATES: | 
 | 			/* display all supported rates in readable format */ | 
 | 			p = current_ev + iwe_stream_lcp_len(info); | 
 |  | 
 | 			memset(&iwe, 0, sizeof(iwe)); | 
 | 			iwe.cmd = SIOCGIWRATE; | 
 | 			/* Those two flags are ignored... */ | 
 | 			iwe.u.bitrate.fixed = iwe.u.bitrate.disabled = 0; | 
 |  | 
 | 			for (i = 0; i < ie[1]; i++) { | 
 | 				iwe.u.bitrate.value = | 
 | 					((ie[i + 2] & 0x7f) * 500000); | 
 | 				tmp = p; | 
 | 				p = iwe_stream_add_value(info, current_ev, p, | 
 | 							 end_buf, &iwe, | 
 | 							 IW_EV_PARAM_LEN); | 
 | 				if (p == tmp) { | 
 | 					current_ev = ERR_PTR(-E2BIG); | 
 | 					goto unlock; | 
 | 				} | 
 | 			} | 
 | 			current_ev = p; | 
 | 			break; | 
 | 		} | 
 | 		rem -= ie[1] + 2; | 
 | 		ie += ie[1] + 2; | 
 | 	} | 
 |  | 
 | 	if (bss->pub.capability & (WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_IBSS) || | 
 | 	    ismesh) { | 
 | 		memset(&iwe, 0, sizeof(iwe)); | 
 | 		iwe.cmd = SIOCGIWMODE; | 
 | 		if (ismesh) | 
 | 			iwe.u.mode = IW_MODE_MESH; | 
 | 		else if (bss->pub.capability & WLAN_CAPABILITY_ESS) | 
 | 			iwe.u.mode = IW_MODE_MASTER; | 
 | 		else | 
 | 			iwe.u.mode = IW_MODE_ADHOC; | 
 | 		current_ev = iwe_stream_add_event_check(info, current_ev, | 
 | 							end_buf, &iwe, | 
 | 							IW_EV_UINT_LEN); | 
 | 		if (IS_ERR(current_ev)) | 
 | 			goto unlock; | 
 | 	} | 
 |  | 
 | 	memset(&iwe, 0, sizeof(iwe)); | 
 | 	iwe.cmd = IWEVCUSTOM; | 
 | 	sprintf(buf, "tsf=%016llx", (unsigned long long)(ies->tsf)); | 
 | 	iwe.u.data.length = strlen(buf); | 
 | 	current_ev = iwe_stream_add_point_check(info, current_ev, end_buf, | 
 | 						&iwe, buf); | 
 | 	if (IS_ERR(current_ev)) | 
 | 		goto unlock; | 
 | 	memset(&iwe, 0, sizeof(iwe)); | 
 | 	iwe.cmd = IWEVCUSTOM; | 
 | 	sprintf(buf, " Last beacon: %ums ago", | 
 | 		elapsed_jiffies_msecs(bss->ts)); | 
 | 	iwe.u.data.length = strlen(buf); | 
 | 	current_ev = iwe_stream_add_point_check(info, current_ev, | 
 | 						end_buf, &iwe, buf); | 
 | 	if (IS_ERR(current_ev)) | 
 | 		goto unlock; | 
 |  | 
 | 	current_ev = ieee80211_scan_add_ies(info, ies, current_ev, end_buf); | 
 |  | 
 |  unlock: | 
 | 	rcu_read_unlock(); | 
 | 	return current_ev; | 
 | } | 
 |  | 
 |  | 
 | static int ieee80211_scan_results(struct cfg80211_registered_device *rdev, | 
 | 				  struct iw_request_info *info, | 
 | 				  char *buf, size_t len) | 
 | { | 
 | 	char *current_ev = buf; | 
 | 	char *end_buf = buf + len; | 
 | 	struct cfg80211_internal_bss *bss; | 
 | 	int err = 0; | 
 |  | 
 | 	spin_lock_bh(&rdev->bss_lock); | 
 | 	cfg80211_bss_expire(rdev); | 
 |  | 
 | 	list_for_each_entry(bss, &rdev->bss_list, list) { | 
 | 		if (buf + len - current_ev <= IW_EV_ADDR_LEN) { | 
 | 			err = -E2BIG; | 
 | 			break; | 
 | 		} | 
 | 		current_ev = ieee80211_bss(&rdev->wiphy, info, bss, | 
 | 					   current_ev, end_buf); | 
 | 		if (IS_ERR(current_ev)) { | 
 | 			err = PTR_ERR(current_ev); | 
 | 			break; | 
 | 		} | 
 | 	} | 
 | 	spin_unlock_bh(&rdev->bss_lock); | 
 |  | 
 | 	if (err) | 
 | 		return err; | 
 | 	return current_ev - buf; | 
 | } | 
 |  | 
 |  | 
 | int cfg80211_wext_giwscan(struct net_device *dev, | 
 | 			  struct iw_request_info *info, | 
 | 			  struct iw_point *data, char *extra) | 
 | { | 
 | 	struct cfg80211_registered_device *rdev; | 
 | 	int res; | 
 |  | 
 | 	if (!netif_running(dev)) | 
 | 		return -ENETDOWN; | 
 |  | 
 | 	rdev = cfg80211_get_dev_from_ifindex(dev_net(dev), dev->ifindex); | 
 |  | 
 | 	if (IS_ERR(rdev)) | 
 | 		return PTR_ERR(rdev); | 
 |  | 
 | 	if (rdev->scan_req || rdev->scan_msg) | 
 | 		return -EAGAIN; | 
 |  | 
 | 	res = ieee80211_scan_results(rdev, info, extra, data->length); | 
 | 	data->length = 0; | 
 | 	if (res >= 0) { | 
 | 		data->length = res; | 
 | 		res = 0; | 
 | 	} | 
 |  | 
 | 	return res; | 
 | } | 
 | EXPORT_WEXT_HANDLER(cfg80211_wext_giwscan); | 
 | #endif |