From 14b3b46a67f78ade99eafcbf320105615e948569 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Date: Fri, 12 Feb 2021 16:21:35 +0100
Subject: [PATCH] net: broadcom: bcm4908_enet: set MTU on open & on request
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Hardware comes up with default max frame size set to 1518. When using it
with switch it results in actual Ethernet MTU 1492:
1518 - 14 (Ethernet header) - 4 (Broadcom's tag) - 4 (802.1q) - 4 (FCS)

Above means hardware in its default state can't handle standard Ethernet
traffic (MTU 1500).

Define maximum possible Ethernet overhead and always set MAC max frame
length accordingly. This change fixes handling Ethernet frames of length
1506 - 1514.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/broadcom/bcm4908_enet.c | 31 ++++++++++++++++----
 1 file changed, 25 insertions(+), 6 deletions(-)

--- a/drivers/net/ethernet/broadcom/bcm4908_enet.c
+++ b/drivers/net/ethernet/broadcom/bcm4908_enet.c
@@ -5,6 +5,7 @@
 
 #include <linux/delay.h>
 #include <linux/etherdevice.h>
+#include <linux/if_vlan.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
 #include <linux/of.h>
@@ -29,9 +30,10 @@
 						 ENET_DMA_CH_CFG_INT_BUFF_DONE)
 #define ENET_DMA_MAX_BURST_LEN			8 /* in 64 bit words */
 
-#define ENET_MTU_MIN				60
-#define ENET_MTU_MAX				1500 /* Is it possible to support 2044? */
-#define ENET_MTU_MAX_EXTRA_SIZE			32 /* L2 */
+#define ENET_MTU_MAX				ETH_DATA_LEN /* Is it possible to support 2044? */
+#define BRCM_MAX_TAG_LEN			6
+#define ENET_MAX_ETH_OVERHEAD			(ETH_HLEN + BRCM_MAX_TAG_LEN + VLAN_HLEN + \
+						 ETH_FCS_LEN + 4) /* 32 */
 
 struct bcm4908_enet_dma_ring_bd {
 	__le32 ctl;
@@ -135,6 +137,11 @@ static void bcm4908_enet_intrs_ack(struc
 	enet_write(enet, ENET_DMA_CH_RX_CFG + ENET_DMA_CH_CFG_INT_STAT, ENET_DMA_INT_DEFAULTS);
 }
 
+static void bcm4908_enet_set_mtu(struct bcm4908_enet *enet, int mtu)
+{
+	enet_umac_write(enet, UMAC_MAX_FRAME_LEN, mtu + ENET_MAX_ETH_OVERHEAD);
+}
+
 /***
  * DMA
  */
@@ -246,7 +253,7 @@ static int bcm4908_enet_dma_alloc_rx_buf
 	u32 tmp;
 	int err;
 
-	slot->len = ENET_MTU_MAX + ENET_MTU_MAX_EXTRA_SIZE;
+	slot->len = ENET_MTU_MAX + ENET_MAX_ETH_OVERHEAD;
 
 	slot->skb = netdev_alloc_skb(enet->netdev, slot->len);
 	if (!slot->skb)
@@ -374,6 +381,8 @@ static void bcm4908_enet_gmac_init(struc
 {
 	u32 cmd;
 
+	bcm4908_enet_set_mtu(enet, enet->netdev->mtu);
+
 	cmd = enet_umac_read(enet, UMAC_CMD);
 	enet_umac_write(enet, UMAC_CMD, cmd | CMD_SW_RESET);
 	enet_umac_write(enet, UMAC_CMD, cmd & ~CMD_SW_RESET);
@@ -559,7 +568,7 @@ static int bcm4908_enet_poll(struct napi
 
 		len = (ctl & DMA_CTL_LEN_DESC_BUFLENGTH) >> DMA_CTL_LEN_DESC_BUFLENGTH_SHIFT;
 
-		if (len < ENET_MTU_MIN ||
+		if (len < ETH_ZLEN ||
 		    (ctl & (DMA_CTL_STATUS_SOP | DMA_CTL_STATUS_EOP)) != (DMA_CTL_STATUS_SOP | DMA_CTL_STATUS_EOP)) {
 			enet->netdev->stats.rx_dropped++;
 			break;
@@ -583,11 +592,21 @@ static int bcm4908_enet_poll(struct napi
 	return handled;
 }
 
+static int bcm4908_enet_change_mtu(struct net_device *netdev, int new_mtu)
+{
+	struct bcm4908_enet *enet = netdev_priv(netdev);
+
+	bcm4908_enet_set_mtu(enet, new_mtu);
+
+	return 0;
+}
+
 static const struct net_device_ops bcm4908_enet_netdev_ops = {
 	.ndo_open = bcm4908_enet_open,
 	.ndo_stop = bcm4908_enet_stop,
 	.ndo_start_xmit = bcm4908_enet_start_xmit,
 	.ndo_set_mac_address = eth_mac_addr,
+	.ndo_change_mtu = bcm4908_enet_change_mtu,
 };
 
 static int bcm4908_enet_probe(struct platform_device *pdev)
@@ -625,7 +644,7 @@ static int bcm4908_enet_probe(struct pla
 	eth_hw_addr_random(netdev);
 	netdev->netdev_ops = &bcm4908_enet_netdev_ops;
 	netdev->min_mtu = ETH_ZLEN;
-	netdev->mtu = ENET_MTU_MAX;
+	netdev->mtu = ETH_DATA_LEN;
 	netdev->max_mtu = ENET_MTU_MAX;
 	netif_napi_add(netdev, &enet->napi, bcm4908_enet_poll, 64);