target/linux/bcm63xx/dts/bcm6362-netgear-dgnd3700-v2.dts

// SPDX-License-Identifier: GPL-2.0-or-later

#include "bcm6362.dtsi"

#include <dt-bindings/input/input.h>

/ {
	model = "Netgear DGND3700v2";
	compatible = "netgear,dgnd3700-v2", "brcm,bcm6362";

	aliases {
		led-boot = &led_power_green;
		led-failsafe = &led_power_green;
		led-running = &led_power_green;
		led-upgrade = &led_power_green;
	};

	chosen {
		bootargs = "rootfstype=squashfs,ubifs noinitrd console=ttyS0,115200";
		stdout-path = "serial0:115200n8";
	};

	keys {
		compatible = "gpio-keys-polled";
		#address-cells = <1>;
		#size-cells = <0>;
		poll-interval = <20>;

		reset {
			label = "reset";
			gpios = <&pinctrl 24 1>;
			linux,code = <KEY_RESTART>;
			debounce-interval = <60>;
		};

		wlan {
			label = "wlan";
			gpios = <&pinctrl 25 1>;
			linux,code = <KEY_WLAN>;
			debounce-interval = <60>;
		};

		wps {
			label = "wps";
			gpios = <&pinctrl 26 1>;
			linux,code = <KEY_WPS_BUTTON>;
			debounce-interval = <60>;
		};
	};

	leds {
		compatible = "gpio-leds";

		led@28 {
			label = "green:dsl";
			gpios = <&pinctrl 28 1>;
		};

		led@34 {
			label = "red:power";
			gpios = <&pinctrl 34 1>;
		};
	};
};

&leds {
	status = "okay";
	brcm,serial-leds;
	brcm,serial-dat-low;
	brcm,serial-shift-inv;
	brcm,serial-mux;

	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_leds &pinctrl_serial_led>;

	led@1 {
		reg = <1>;
		active-low;
		label = "green:internet";
	};

	led_power_green: led@8 {
		reg = <8>;
		label = "green:power";
		default-state = "on";
	};

	led@9 {
		reg = <9>;
		active-low;
		label = "green:wps";
	};

	led@10 {
		reg = <10>;
		active-low;
		label = "green:usb1";
	};

	led@11 {
		reg = <11>;
		active-low;
		label = "green:usb2";
	};

	led@12 {
		reg = <12>;
		active-low;
		label = "amber:internet";
	};

	led@13 {
		reg = <13>;
		active-low;
		label = "green:ethernet";
	};

	led@14 {
		reg = <14>;
		active-low;
		label = "amber:dsl";
	};

	led@16 {
		reg = <16>;
		active-low;
		label = "amber:usb1";
	};

	led@17 {
		reg = <17>;
		active-low;
		label = "amber:usb2";
	};

	led@18 {
		reg = <18>;
		active-low;
		label = "amber:ethernet";
	};
};

&nflash {
	status = "okay";

	nandcs@0 {
		compatible = "brcm,nandcs";
		#size-cells = <1>;
		#address-cells = <1>;
		reg = <0>;
		nand-ecc-step-size = <512>;
		nand-ecc-strength = <15>;
		nand-on-flash-bbt;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			partition@0 {
				label = "cferom";
				reg = <0x0000000 0x0004000>;
				read-only;
			};

			partition@4000 {
				compatible = "brcm,wfi";
				label = "wfi";
				reg = <0x0004000 0x1c7c000>;
				brcm,cferam = "cfe";
			};

			partition@1c80000 {
				label = "flag";
				reg = <0x1c80000 0x0040000>;
				read-only;
			};

			partition@1cc0000 {
				label = "pcbasn";
				reg = <0x1cc0000 0x0040000>;
				read-only;
			};

			partition@1d00000 {
				label = "xxx";
				reg = <0x1d00000 0x0080000>;
				read-only;
			};

			partition@1d80000 {
				label = "language_dev";
				reg = <0x1d80000 0x0040000>;
				read-only;
			};

			partition@1dc0000 {
				label = "scnvram";
				reg = <0x1dc0000 0x0100000>;
				read-only;
			};
		};
	};
};

&pinctrl {
	pinctrl_leds: leds {
		function = "led";
		pins = "gpio1";
	};
};

&uart0 {
	status = "okay";
};