target/linux/lantiq/patches-5.4/0026-MIPS-lantiq-Add-GPHY-Firmware-loader.patch

From c8eedcadc38a5e6008d3990fbe0a5285b30335fc Mon Sep 17 00:00:00 2001
From: Mathias Kresin <dev@kresin.me>
Date: Sun, 7 Jul 2019 21:48:56 +0200
Subject: [PATCH] MIPS: lantiq: Add GPHY Firmware loader

Upstream, the GPHY Firmware loader has been merged into the DSA switch
driver. But we don't use the driver yet, so bring it back.

Signed-off-by: Mathias Kresin <dev@kresin.me>
---
 .../bindings/mips/lantiq/rcu-gphy.txt         |  36 +++
 .../devicetree/bindings/mips/lantiq/rcu.txt   |  18 ++
 arch/mips/configs/xway_defconfig              |   1 +
 arch/mips/lantiq/Kconfig                      |   4 +
 drivers/soc/lantiq/Makefile                   |   1 +
 drivers/soc/lantiq/gphy.c                     | 224 ++++++++++++++++++
 6 files changed, 284 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mips/lantiq/rcu-gphy.txt
 create mode 100644 drivers/soc/lantiq/gphy.c

--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/lantiq/rcu-gphy.txt
@@ -0,0 +1,37 @@
+Lantiq XWAY SoC GPHY binding
+============================
+
+This binding describes a software-defined ethernet PHY, provided by the RCU
+module on newer Lantiq XWAY SoCs (xRX200 and newer).
+
+-------------------------------------------------------------------------------
+Required properties:
+- compatible		: Should be one of
+				"lantiq,xrx200-gphy"
+				"lantiq,xrx200a1x-gphy"
+				"lantiq,xrx200a2x-gphy"
+				"lantiq,xrx300-gphy"
+				"lantiq,xrx330-gphy"
+- reg			: Addrress of the GPHY FW load address register
+- resets		: Must reference the RCU GPHY reset bit
+- reset-names		: One entry, value must be "gphy" or optional "gphy2"
+- clocks		: A reference to the (PMU) GPHY clock gate
+
+Optional properties:
+- lantiq,gphy-mode	: GPHY_MODE_GE (default) or GPHY_MODE_FE as defined in
+			  <dt-bindings/mips/lantiq_xway_gphy.h>
+
+
+-------------------------------------------------------------------------------
+Example for the GPHys on the xRX200 SoCs:
+
+#include <dt-bindings/mips/lantiq_rcu_gphy.h>
+	gphy0: gphy@20 {
+		compatible = "lantiq,xrx200a2x-gphy";
+		reg = <0x20 0x4>;
+
+		resets = <&reset0 31 30>, <&reset1 7 7>;
+		reset-names = "gphy", "gphy2";
+		clocks = <&pmu0 XRX200_PMU_GATE_GPHY>;
+		lantiq,gphy-mode = <GPHY_MODE_GE>;
+	};
--- a/Documentation/devicetree/bindings/mips/lantiq/rcu.txt
+++ b/Documentation/devicetree/bindings/mips/lantiq/rcu.txt
@@ -26,6 +26,24 @@ Example of the RCU bindings on a xRX200
 		ranges = <0x0 0x203000 0x100>;
 		big-endian;
 
+		gphy0: gphy@20 {
+			compatible = "lantiq,xrx200a2x-gphy";
+			reg = <0x20 0x4>;
+
+			resets = <&reset0 31 30>, <&reset1 7 7>;
+			reset-names = "gphy", "gphy2";
+			lantiq,gphy-mode = <GPHY_MODE_GE>;
+		};
+
+		gphy1: gphy@68 {
+			compatible = "lantiq,xrx200a2x-gphy";
+			reg = <0x68 0x4>;
+
+			resets = <&reset0 29 28>, <&reset1 6 6>;
+			reset-names = "gphy", "gphy2";
+			lantiq,gphy-mode = <GPHY_MODE_GE>;
+		};
+
 		reset0: reset-controller@10 {
 			compatible = "lantiq,xrx200-reset";
 			reg = <0x10 4>, <0x14 4>;
--- a/arch/mips/configs/xway_defconfig
+++ b/arch/mips/configs/xway_defconfig
@@ -13,6 +13,7 @@ CONFIG_EMBEDDED=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_LANTIQ=y
 CONFIG_PCI_LANTIQ=y
+CONFIG_XRX200_PHY_FW=y
 CONFIG_CPU_MIPS32_R2=y
 CONFIG_MIPS_VPE_LOADER=y
 CONFIG_NR_CPUS=2
--- a/arch/mips/lantiq/Kconfig
+++ b/arch/mips/lantiq/Kconfig
@@ -62,4 +62,8 @@ config PCIE_LANTIQ_MSI
 	depends on PCIE_LANTIQ && PCI_MSI
 	default y
 
+config XRX200_PHY_FW
+	bool "XRX200 PHY firmware loader"
+	depends on SOC_XWAY
+
 endif
--- a/drivers/soc/lantiq/Makefile
+++ b/drivers/soc/lantiq/Makefile
@@ -1,2 +1,3 @@
 # SPDX-License-Identifier: GPL-2.0-only
 obj-y				+= fpi-bus.o
+obj-$(CONFIG_XRX200_PHY_FW)	+= gphy.o
--- /dev/null
+++ b/drivers/soc/lantiq/gphy.c
@@ -0,0 +1,235 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2012 John Crispin <blogic@phrozen.org>
+ *  Copyright (C) 2016 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+ *  Copyright (C) 2017 Hauke Mehrtens <hauke@hauke-m.de>
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/firmware.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/reboot.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+#include <linux/property.h>
+#include <dt-bindings/mips/lantiq_rcu_gphy.h>
+
+#include <lantiq_soc.h>
+
+#define XRX200_GPHY_FW_ALIGN	(16 * 1024)
+
+struct xway_gphy_priv {
+	struct clk *gphy_clk_gate;
+	struct reset_control *gphy_reset;
+	struct reset_control *gphy_reset2;
+	void __iomem *membase;
+	char *fw_name;
+};
+
+struct xway_gphy_match_data {
+	char *fe_firmware_name;
+	char *ge_firmware_name;
+};
+
+static const struct xway_gphy_match_data xrx200a1x_gphy_data = {
+	.fe_firmware_name = "lantiq/xrx200_phy22f_a14.bin",
+	.ge_firmware_name = "lantiq/xrx200_phy11g_a14.bin",
+};
+
+static const struct xway_gphy_match_data xrx200a2x_gphy_data = {
+	.fe_firmware_name = "lantiq/xrx200_phy22f_a22.bin",
+	.ge_firmware_name = "lantiq/xrx200_phy11g_a22.bin",
+};
+
+static const struct xway_gphy_match_data xrx300_gphy_data = {
+	.fe_firmware_name = "lantiq/xrx300_phy22f_a21.bin",
+	.ge_firmware_name = "lantiq/xrx300_phy11g_a21.bin",
+};
+
+static const struct of_device_id xway_gphy_match[] = {
+	{ .compatible = "lantiq,xrx200-gphy", .data = NULL },
+	{ .compatible = "lantiq,xrx200a1x-gphy", .data = &xrx200a1x_gphy_data },
+	{ .compatible = "lantiq,xrx200a2x-gphy", .data = &xrx200a2x_gphy_data },
+	{ .compatible = "lantiq,xrx300-gphy", .data = &xrx300_gphy_data },
+	{ .compatible = "lantiq,xrx330-gphy", .data = &xrx300_gphy_data },
+	{},
+};
+MODULE_DEVICE_TABLE(of, xway_gphy_match);
+
+static int xway_gphy_load(struct device *dev, struct xway_gphy_priv *priv,
+			  dma_addr_t *dev_addr)
+{
+	const struct firmware *fw;
+	void *fw_addr;
+	dma_addr_t dma_addr;
+	size_t size;
+	int ret;
+
+	ret = request_firmware(&fw, priv->fw_name, dev);
+	if (ret) {
+		dev_err(dev, "failed to load firmware: %s, error: %i\n",
+			priv->fw_name, ret);
+		return ret;
+	}
+
+	/*
+	 * GPHY cores need the firmware code in a persistent and contiguous
+	 * memory area with a 16 kB boundary aligned start address.
+	 */
+	size = fw->size + XRX200_GPHY_FW_ALIGN;
+
+	fw_addr = dmam_alloc_coherent(dev, size, &dma_addr, GFP_KERNEL);
+	if (fw_addr) {
+		fw_addr = PTR_ALIGN(fw_addr, XRX200_GPHY_FW_ALIGN);
+		*dev_addr = ALIGN(dma_addr, XRX200_GPHY_FW_ALIGN);
+		memcpy(fw_addr, fw->data, fw->size);
+	} else {
+		dev_err(dev, "failed to alloc firmware memory\n");
+		ret = -ENOMEM;
+	}
+
+	release_firmware(fw);
+
+	return ret;
+}
+
+static int xway_gphy_of_probe(struct platform_device *pdev,
+			      struct xway_gphy_priv *priv)
+{
+	struct device *dev = &pdev->dev;
+	const struct xway_gphy_match_data *gphy_fw_name_cfg;
+	u32 gphy_mode;
+	int ret;
+	struct resource *res_gphy;
+
+	gphy_fw_name_cfg = of_device_get_match_data(dev);
+
+	if (of_device_is_compatible(pdev->dev.of_node, "lantiq,xrx200-gphy"))
+		switch (ltq_soc_type()) {
+		case SOC_TYPE_VR9:
+			gphy_fw_name_cfg = &xrx200a1x_gphy_data;
+			break;
+		case SOC_TYPE_VR9_2:
+			gphy_fw_name_cfg = &xrx200a2x_gphy_data;
+			break;
+		}
+
+	priv->gphy_clk_gate = devm_clk_get(dev, NULL);
+	if (IS_ERR(priv->gphy_clk_gate)) {
+		dev_err(dev, "Failed to lookup gate clock\n");
+		return PTR_ERR(priv->gphy_clk_gate);
+	}
+
+	res_gphy = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->membase = devm_ioremap_resource(dev, res_gphy);
+	if (IS_ERR(priv->membase))
+		return PTR_ERR(priv->membase);
+
+	priv->gphy_reset = devm_reset_control_get(dev, "gphy");
+	if (IS_ERR(priv->gphy_reset)) {
+		if (PTR_ERR(priv->gphy_reset) != -EPROBE_DEFER)
+			dev_err(dev, "Failed to lookup gphy reset\n");
+		return PTR_ERR(priv->gphy_reset);
+	}
+
+	priv->gphy_reset2 = devm_reset_control_get_optional(dev, "gphy2");
+	if (IS_ERR(priv->gphy_reset2))
+		return PTR_ERR(priv->gphy_reset2);
+
+	ret = device_property_read_u32(dev, "lantiq,gphy-mode", &gphy_mode);
+	/* Default to GE mode */
+	if (ret)
+		gphy_mode = GPHY_MODE_GE;
+
+	switch (gphy_mode) {
+	case GPHY_MODE_FE:
+		priv->fw_name = gphy_fw_name_cfg->fe_firmware_name;
+		break;
+	case GPHY_MODE_GE:
+		priv->fw_name = gphy_fw_name_cfg->ge_firmware_name;
+		break;
+	default:
+		dev_err(dev, "Unknown GPHY mode %d\n", gphy_mode);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int xway_gphy_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct xway_gphy_priv *priv;
+	dma_addr_t fw_addr = 0;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	ret = xway_gphy_of_probe(pdev, priv);
+	if (ret)
+		return ret;
+
+	ret = clk_prepare_enable(priv->gphy_clk_gate);
+	if (ret)
+		return ret;
+
+	ret = xway_gphy_load(dev, priv, &fw_addr);
+	if (ret) {
+		clk_disable_unprepare(priv->gphy_clk_gate);
+		return ret;
+	}
+
+	reset_control_assert(priv->gphy_reset);
+	reset_control_assert(priv->gphy_reset2);
+
+	iowrite32be(fw_addr, priv->membase);
+
+	reset_control_deassert(priv->gphy_reset);
+	reset_control_deassert(priv->gphy_reset2);
+
+	platform_set_drvdata(pdev, priv);
+
+	return ret;
+}
+
+static int xway_gphy_remove(struct platform_device *pdev)
+{
+	struct xway_gphy_priv *priv = platform_get_drvdata(pdev);
+
+	iowrite32be(0, priv->membase);
+
+	clk_disable_unprepare(priv->gphy_clk_gate);
+
+	return 0;
+}
+
+static struct platform_driver xway_gphy_driver = {
+	.probe = xway_gphy_probe,
+	.remove = xway_gphy_remove,
+	.driver = {
+		.name = "xway-rcu-gphy",
+		.of_match_table = xway_gphy_match,
+	},
+};
+
+module_platform_driver(xway_gphy_driver);
+
+MODULE_FIRMWARE("lantiq/xrx300_phy11g_a21.bin");
+MODULE_FIRMWARE("lantiq/xrx300_phy22f_a21.bin");
+MODULE_FIRMWARE("lantiq/xrx200_phy11g_a14.bin");
+MODULE_FIRMWARE("lantiq/xrx200_phy11g_a22.bin");
+MODULE_FIRMWARE("lantiq/xrx200_phy22f_a14.bin");
+MODULE_FIRMWARE("lantiq/xrx200_phy22f_a22.bin");
+MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>");
+MODULE_DESCRIPTION("Lantiq XWAY GPHY Firmware Loader");
+MODULE_LICENSE("GPL");