target/linux/layerscape/patches-5.4/701-net-0033-sdk_dpaa-adapt-to-the-new-API-for-MTU-changes.patch

From 828ec34f1fade88f1e751b7000959aaddfe44e5c Mon Sep 17 00:00:00 2001
From: Camelia Groza <camelia.groza@nxp.com>
Date: Thu, 21 Sep 2017 10:50:57 +0300
Subject: [PATCH] sdk_dpaa: adapt to the new API for MTU changes

Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
---
 drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.c | 14 +++++++++++-
 .../ethernet/freescale/sdk_dpaa/dpaa_eth_common.c  | 25 ----------------------
 .../ethernet/freescale/sdk_dpaa/dpaa_eth_common.h  |  1 -
 3 files changed, 13 insertions(+), 27 deletions(-)

--- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.c
+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.c
@@ -681,7 +681,6 @@ static const struct net_device_ops dpa_p
 #ifdef CONFIG_FSL_DPAA_ETH_USE_NDO_SELECT_QUEUE
 	.ndo_select_queue = dpa_select_queue,
 #endif
-	.ndo_change_mtu = dpa_change_mtu,
 	.ndo_set_rx_mode = dpa_set_rx_mode,
 	.ndo_init = dpa_ndo_init,
 	.ndo_set_features = dpa_set_features,
@@ -758,6 +757,19 @@ static int dpa_private_netdev_init(struc
 	net_dev->mem_start = priv->mac_dev->res->start;
 	net_dev->mem_end = priv->mac_dev->res->end;
 
+	/* Configure the maximum MTU according to the FMan's MAXFRM */
+	net_dev->min_mtu = ETH_MIN_MTU;
+	net_dev->max_mtu = dpa_get_max_mtu();
+
+#ifndef CONFIG_PPC
+	/* Due to the A010022 FMan errata, we can not use contig frames larger
+	 * than 4K, nor S/G frames. We need to prevent the user from setting a
+	 * large MTU.
+	 */
+	if (unlikely(dpaa_errata_a010022))
+		net_dev->max_mtu = DPA_BP_RAW_SIZE;
+#endif
+
 	net_dev->hw_features |= (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
 		NETIF_F_LLTX);
 
--- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_common.c
+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_common.c
@@ -261,31 +261,6 @@ dpa_get_stats64(struct net_device *net_d
 }
 EXPORT_SYMBOL(dpa_get_stats64);
 
-int dpa_change_mtu(struct net_device *net_dev, int new_mtu)
-{
-	int max_mtu = dpa_get_max_mtu();
-
-#ifndef CONFIG_PPC
-	/* Due to the A010022 FMan errata, we can not use contig frames larger
-	 * than 4K, nor S/G frames. We need to prevent the user from setting a
-	 * large MTU.
-	 */
-	if (unlikely(dpaa_errata_a010022))
-		max_mtu = DPA_BP_RAW_SIZE;
-#endif
-
-	/* Make sure we don't exceed the Ethernet controller's MAXFRM */
-	if (new_mtu < 68 || new_mtu > max_mtu) {
-		netdev_err(net_dev, "Invalid L3 mtu %d (must be between %d and %d).\n",
-				new_mtu, 68, max_mtu);
-		return -EINVAL;
-	}
-	net_dev->mtu = new_mtu;
-
-	return 0;
-}
-EXPORT_SYMBOL(dpa_change_mtu);
-
 /* .ndo_init callback */
 int dpa_ndo_init(struct net_device *net_dev)
 {
--- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_common.h
+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_common.h
@@ -143,7 +143,6 @@ void __cold dpa_timeout(struct net_devic
 void __cold
 dpa_get_stats64(struct net_device *net_dev,
 		struct rtnl_link_stats64 *stats);
-int dpa_change_mtu(struct net_device *net_dev, int new_mtu);
 int dpa_ndo_init(struct net_device *net_dev);
 int dpa_set_features(struct net_device *dev, netdev_features_t features);
 netdev_features_t dpa_fix_features(struct net_device *dev,