| From 2c2c7e16ad0401f85dd8ff9bc0789fa10e715c0e Mon Sep 17 00:00:00 2001 |
| From: Clark Wang <xiaoning.wang@nxp.com> |
| Date: Tue, 15 Jan 2019 10:04:30 +0800 |
| Subject: [PATCH] MLK-20368 i2c-imx: Coverity: fix divide by zero warning |
| |
| "i2c_clk_rate / 2" might be zero when the i2c_clk_rate gets the clock is |
| 0 or 1, so add a judgment to avoid the denominator is equal to 0. |
| |
| Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> |
| [Arul: Add support to check return value everywhere in the driver] |
| Signed-off-by: Arulpandiyan Vadivel <arulpandiyan_vadivel@mentor.com> |
| |
| Signed-off-by: Shrikant Bobade <Shrikant_Bobade@mentor.com> |
| (cherry picked from commit d382de595bffc0975ab7c0582e08dd4f7afc0c1a) |
| (cherry picked from commit 456caa9ba270ca8f4f962918a0625d1a8348f316) |
| --- |
| drivers/i2c/busses/i2c-imx.c | 31 +++++++++++++++++++++++++------ |
| 1 file changed, 25 insertions(+), 6 deletions(-) |
| |
| --- a/drivers/i2c/busses/i2c-imx.c |
| +++ b/drivers/i2c/busses/i2c-imx.c |
| @@ -514,16 +514,24 @@ static int i2c_imx_acked(struct imx_i2c_ |
| return 0; |
| } |
| |
| -static void i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx, |
| +static int i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx, |
| unsigned int i2c_clk_rate) |
| { |
| struct imx_i2c_clk_pair *i2c_clk_div = i2c_imx->hwdata->clk_div; |
| unsigned int div; |
| int i; |
| |
| - /* Divider value calculation */ |
| if (i2c_imx->cur_clk == i2c_clk_rate) |
| - return; |
| + return 0; |
| + |
| + /* |
| + * Keep the denominator of the following program |
| + * always NOT equal to 0. |
| + */ |
| + |
| + /* Divider value calculation */ |
| + if (!(i2c_clk_rate / 2)) |
| + return -EINVAL; |
| |
| i2c_imx->cur_clk = i2c_clk_rate; |
| |
| @@ -554,20 +562,23 @@ static void i2c_imx_set_clk(struct imx_i |
| dev_dbg(&i2c_imx->adapter.dev, "IFDR[IC]=0x%x, REAL DIV=%d\n", |
| i2c_clk_div[i].val, i2c_clk_div[i].div); |
| #endif |
| + |
| + return 0; |
| } |
| |
| static int i2c_imx_clk_notifier_call(struct notifier_block *nb, |
| unsigned long action, void *data) |
| { |
| + int ret = 0; |
| struct clk_notifier_data *ndata = data; |
| struct imx_i2c_struct *i2c_imx = container_of(nb, |
| struct imx_i2c_struct, |
| clk_change_nb); |
| |
| if (action & POST_RATE_CHANGE) |
| - i2c_imx_set_clk(i2c_imx, ndata->new_rate); |
| + ret = i2c_imx_set_clk(i2c_imx, ndata->new_rate); |
| |
| - return NOTIFY_OK; |
| + return notifier_from_errno(ret); |
| } |
| |
| static int i2c_imx_start(struct imx_i2c_struct *i2c_imx) |
| @@ -577,6 +588,10 @@ static int i2c_imx_start(struct imx_i2c_ |
| |
| dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__); |
| |
| + result = i2c_imx_set_clk(i2c_imx, clk_get_rate(i2c_imx->clk)); |
| + if (result) |
| + return result; |
| + |
| imx_i2c_write_reg(i2c_imx->ifdr, i2c_imx, IMX_I2C_IFDR); |
| /* Enable I2C controller */ |
| imx_i2c_write_reg(i2c_imx->hwdata->i2sr_clr_opcode, i2c_imx, IMX_I2C_I2SR); |
| @@ -1203,7 +1218,11 @@ static int i2c_imx_probe(struct platform |
| i2c_imx->bitrate = pdata->bitrate; |
| i2c_imx->clk_change_nb.notifier_call = i2c_imx_clk_notifier_call; |
| clk_notifier_register(i2c_imx->clk, &i2c_imx->clk_change_nb); |
| - i2c_imx_set_clk(i2c_imx, clk_get_rate(i2c_imx->clk)); |
| + ret = i2c_imx_set_clk(i2c_imx, clk_get_rate(i2c_imx->clk)); |
| + if (ret < 0) { |
| + dev_err(&pdev->dev, "can't get I2C clock\n"); |
| + goto clk_notifier_unregister; |
| + } |
| |
| /* |
| * This limit caused by an i.MX7D hardware issue(e7805 in Errata). |