| # SPDX-License-Identifier: GPL-2.0-only |
| # |
| # Copyright (C) 2012-2016 OpenWrt.org |
| # Copyright (C) 2016 LEDE-project.org |
| |
| define Device/dsa-migration |
| DEVICE_COMPAT_VERSION := 1.1 |
| DEVICE_COMPAT_MESSAGE := Config cannot be migrated from swconfig to DSA |
| endef |
| |
| define Device/kernel-size-migration |
| DEVICE_COMPAT_VERSION := 2.0 |
| DEVICE_COMPAT_MESSAGE := Partition design has changed compared to older versions (up to 19.07) due to kernel size restrictions. \ |
| Upgrade via sysupgrade mechanism is not possible, so new installation via factory style image is required. |
| endef |
| |
| define Device/buffalo_ls421de |
| $(Device/NAND-128K) |
| DEVICE_VENDOR := Buffalo |
| DEVICE_MODEL := LinkStation LS421DE |
| SUBPAGESIZE := |
| KERNEL_SIZE := 33554432 |
| FILESYSTEMS := squashfs ubifs |
| KERNEL := kernel-bin | append-dtb | uImage none | buffalo-kernel-jffs2 |
| KERNEL_INITRAMFS := kernel-bin | append-dtb | uImage none |
| DEVICE_DTS := armada-370-buffalo-ls421de |
| DEVICE_PACKAGES := \ |
| kmod-rtc-rs5c372a kmod-hwmon-gpiofan kmod-hwmon-drivetemp kmod-usb3 \ |
| kmod-linkstation-poweroff kmod-md-raid0 kmod-md-raid1 kmod-md-mod \ |
| kmod-fs-xfs mkf2fs e2fsprogs partx-utils |
| endef |
| TARGET_DEVICES += buffalo_ls421de |
| |
| define Device/cznic_turris-omnia |
| DEVICE_VENDOR := CZ.NIC |
| DEVICE_MODEL := Turris Omnia |
| KERNEL_INSTALL := 1 |
| SOC := armada-385 |
| KERNEL := kernel-bin |
| KERNEL_INITRAMFS := kernel-bin | gzip | fit gzip $$(KDIR)/image-$$(DEVICE_DTS).dtb |
| DEVICE_PACKAGES := \ |
| mkf2fs e2fsprogs kmod-fs-vfat kmod-nls-cp437 kmod-nls-iso8859-1 \ |
| wpad-basic-wolfssl kmod-ath9k kmod-ath10k-ct ath10k-firmware-qca988x-ct \ |
| partx-utils kmod-i2c-mux-pca954x |
| IMAGES := $$(IMAGE_PREFIX)-sysupgrade.img.gz omnia-medkit-$$(IMAGE_PREFIX)-initramfs.tar.gz |
| IMAGE/$$(IMAGE_PREFIX)-sysupgrade.img.gz := boot-scr | boot-img | sdcard-img | gzip | append-metadata |
| IMAGE/omnia-medkit-$$(IMAGE_PREFIX)-initramfs.tar.gz := omnia-medkit-initramfs | gzip |
| IMAGE_NAME = $$(2) |
| SUPPORTED_DEVICES += armada-385-turris-omnia |
| BOOT_SCRIPT := turris-omnia |
| endef |
| TARGET_DEVICES += cznic_turris-omnia |
| |
| define Device/globalscale_mirabox |
| $(Device/NAND-512K) |
| DEVICE_VENDOR := Globalscale |
| DEVICE_MODEL := Mirabox |
| SOC := armada-370 |
| SUPPORTED_DEVICES += mirabox |
| endef |
| TARGET_DEVICES += globalscale_mirabox |
| |
| define Device/kobol_helios4 |
| DEVICE_VENDOR := Kobol |
| DEVICE_MODEL := Helios4 |
| KERNEL_INSTALL := 1 |
| KERNEL := kernel-bin |
| DEVICE_PACKAGES := mkf2fs e2fsprogs partx-utils |
| IMAGES := sdcard.img.gz |
| IMAGE/sdcard.img.gz := boot-scr | boot-img-ext4 | sdcard-img-ext4 | gzip | append-metadata |
| SOC := armada-388 |
| UBOOT := helios4-u-boot-spl.kwb |
| BOOT_SCRIPT := clearfog |
| endef |
| TARGET_DEVICES += kobol_helios4 |
| |
| define Device/linksys |
| $(Device/NAND-128K) |
| DEVICE_VENDOR := Linksys |
| DEVICE_PACKAGES := kmod-mwlwifi wpad-basic-wolfssl |
| IMAGES += factory.img |
| IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | \ |
| append-ubi | pad-to $$$$(PAGESIZE) |
| KERNEL_SIZE := 6144k |
| endef |
| |
| define Device/linksys_wrt1200ac |
| $(call Device/linksys) |
| $(Device/dsa-migration) |
| DEVICE_MODEL := WRT1200AC |
| DEVICE_ALT0_VENDOR := Linksys |
| DEVICE_ALT0_MODEL := Caiman |
| DEVICE_DTS := armada-385-linksys-caiman |
| DEVICE_PACKAGES += mwlwifi-firmware-88w8864 |
| SUPPORTED_DEVICES += armada-385-linksys-caiman linksys,caiman |
| endef |
| TARGET_DEVICES += linksys_wrt1200ac |
| |
| define Device/linksys_wrt1900acs |
| $(call Device/linksys) |
| $(Device/dsa-migration) |
| DEVICE_MODEL := WRT1900ACS |
| DEVICE_VARIANT := v1 |
| DEVICE_ALT0_VENDOR := Linksys |
| DEVICE_ALT0_MODEL := WRT1900ACS |
| DEVICE_ALT0_VARIANT := v2 |
| DEVICE_ALT1_VENDOR := Linksys |
| DEVICE_ALT1_MODEL := Shelby |
| DEVICE_DTS := armada-385-linksys-shelby |
| DEVICE_PACKAGES += mwlwifi-firmware-88w8864 |
| SUPPORTED_DEVICES += armada-385-linksys-shelby linksys,shelby |
| endef |
| TARGET_DEVICES += linksys_wrt1900acs |
| |
| define Device/linksys_wrt1900ac-v1 |
| $(call Device/linksys) |
| $(Device/kernel-size-migration) |
| DEVICE_MODEL := WRT1900AC |
| DEVICE_VARIANT := v1 |
| DEVICE_ALT0_VENDOR := Linksys |
| DEVICE_ALT0_MODEL := Mamba |
| DEVICE_DTS := armada-xp-linksys-mamba |
| DEVICE_PACKAGES += mwlwifi-firmware-88w8864 |
| KERNEL_SIZE := 4096k |
| SUPPORTED_DEVICES += armada-xp-linksys-mamba linksys,mamba |
| endef |
| TARGET_DEVICES += linksys_wrt1900ac-v1 |
| |
| define Device/linksys_wrt1900ac-v2 |
| $(call Device/linksys) |
| $(Device/dsa-migration) |
| DEVICE_MODEL := WRT1900AC |
| DEVICE_VARIANT := v2 |
| DEVICE_ALT0_VENDOR := Linksys |
| DEVICE_ALT0_MODEL := Cobra |
| DEVICE_DTS := armada-385-linksys-cobra |
| DEVICE_PACKAGES += mwlwifi-firmware-88w8864 |
| SUPPORTED_DEVICES += armada-385-linksys-cobra linksys,cobra |
| endef |
| TARGET_DEVICES += linksys_wrt1900ac-v2 |
| |
| define Device/linksys_wrt3200acm |
| $(call Device/linksys) |
| $(Device/dsa-migration) |
| DEVICE_MODEL := WRT3200ACM |
| DEVICE_ALT0_VENDOR := Linksys |
| DEVICE_ALT0_MODEL := Rango |
| DEVICE_DTS := armada-385-linksys-rango |
| DEVICE_PACKAGES += kmod-btmrvl kmod-mwifiex-sdio mwlwifi-firmware-88w8964 |
| SUPPORTED_DEVICES += armada-385-linksys-rango linksys,rango |
| endef |
| TARGET_DEVICES += linksys_wrt3200acm |
| |
| define Device/linksys_wrt32x |
| $(call Device/linksys) |
| $(Device/kernel-size-migration) |
| DEVICE_MODEL := WRT32X |
| DEVICE_ALT0_VENDOR := Linksys |
| DEVICE_ALT0_MODEL := Venom |
| DEVICE_DTS := armada-385-linksys-venom |
| DEVICE_PACKAGES += kmod-btmrvl kmod-mwifiex-sdio mwlwifi-firmware-88w8964 |
| KERNEL_SIZE := 6144k |
| KERNEL := kernel-bin | append-dtb |
| SUPPORTED_DEVICES += armada-385-linksys-venom linksys,venom |
| endef |
| TARGET_DEVICES += linksys_wrt32x |
| |
| define Device/marvell_a370-db |
| $(Device/NAND-512K) |
| DEVICE_VENDOR := Marvell |
| DEVICE_MODEL := Armada 370 Development Board (DB-88F6710-BP-DDR3) |
| DEVICE_DTS := armada-370-db |
| SUPPORTED_DEVICES += armada-370-db |
| endef |
| TARGET_DEVICES += marvell_a370-db |
| |
| define Device/marvell_a370-rd |
| $(Device/NAND-512K) |
| DEVICE_VENDOR := Marvell |
| DEVICE_MODEL := Armada 370 RD (RD-88F6710-A1) |
| DEVICE_DTS := armada-370-rd |
| SUPPORTED_DEVICES += armada-370-rd |
| endef |
| TARGET_DEVICES += marvell_a370-rd |
| |
| define Device/marvell_a385-db-ap |
| $(Device/NAND-256K) |
| DEVICE_VENDOR := Marvell |
| DEVICE_MODEL := Armada 385 Development Board AP (DB-88F6820-AP) |
| DEVICE_DTS := armada-385-db-ap |
| IMAGES += factory.img |
| IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | \ |
| append-ubi | pad-to $$$$(PAGESIZE) |
| KERNEL_SIZE := 8192k |
| SUPPORTED_DEVICES += armada-385-db-ap |
| endef |
| TARGET_DEVICES += marvell_a385-db-ap |
| |
| define Device/marvell_a388-rd |
| DEVICE_VENDOR := Marvell |
| DEVICE_MODEL := Armada 388 RD (RD-88F6820-AP) |
| DEVICE_DTS := armada-388-rd |
| IMAGES := firmware.bin |
| IMAGE/firmware.bin := append-kernel | pad-to 256k | append-rootfs | pad-rootfs |
| SUPPORTED_DEVICES := armada-388-rd marvell,a385-rd |
| endef |
| TARGET_DEVICES += marvell_a388-rd |
| |
| define Device/marvell_axp-db |
| $(Device/NAND-512K) |
| DEVICE_VENDOR := Marvell |
| DEVICE_MODEL := Armada XP Development Board (DB-78460-BP) |
| DEVICE_DTS := armada-xp-db |
| SUPPORTED_DEVICES += armada-xp-db |
| endef |
| TARGET_DEVICES += marvell_axp-db |
| |
| define Device/marvell_axp-gp |
| $(Device/NAND-512K) |
| DEVICE_VENDOR := Marvell |
| DEVICE_MODEL := Armada Armada XP GP (DB-MV784MP-GP) |
| DEVICE_DTS := armada-xp-gp |
| SUPPORTED_DEVICES += armada-xp-gp |
| endef |
| TARGET_DEVICES += marvell_axp-gp |
| |
| define Device/plathome_openblocks-ax3-4 |
| DEVICE_VENDOR := Plat'Home |
| DEVICE_MODEL := OpenBlocks AX3 |
| DEVICE_VARIANT := 4 ports |
| SOC := armada-xp |
| SUPPORTED_DEVICES += openblocks-ax3-4 |
| BLOCKSIZE := 128k |
| PAGESIZE := 1 |
| IMAGES += factory.img |
| IMAGE/factory.img := append-kernel | pad-to $$(BLOCKSIZE) | append-ubi |
| endef |
| TARGET_DEVICES += plathome_openblocks-ax3-4 |
| |
| define Device/solidrun_clearfog-base-a1 |
| DEVICE_VENDOR := SolidRun |
| DEVICE_MODEL := ClearFog Base |
| KERNEL_INSTALL := 1 |
| KERNEL := kernel-bin |
| DEVICE_PACKAGES := mkf2fs e2fsprogs partx-utils |
| IMAGES := sdcard.img.gz |
| IMAGE/sdcard.img.gz := boot-scr | boot-img-ext4 | sdcard-img-ext4 | gzip | append-metadata |
| DEVICE_DTS := armada-388-clearfog-base armada-388-clearfog-pro |
| UBOOT := clearfog-u-boot-spl.kwb |
| BOOT_SCRIPT := clearfog |
| SUPPORTED_DEVICES += armada-388-clearfog-base |
| DEVICE_COMPAT_VERSION := 1.1 |
| DEVICE_COMPAT_MESSAGE := Ethernet interface rename has been dropped |
| endef |
| TARGET_DEVICES += solidrun_clearfog-base-a1 |
| |
| define Device/solidrun_clearfog-pro-a1 |
| $(Device/dsa-migration) |
| DEVICE_VENDOR := SolidRun |
| DEVICE_MODEL := ClearFog Pro |
| KERNEL_INSTALL := 1 |
| KERNEL := kernel-bin |
| DEVICE_PACKAGES := mkf2fs e2fsprogs partx-utils |
| IMAGES := sdcard.img.gz |
| IMAGE/sdcard.img.gz := boot-scr | boot-img-ext4 | sdcard-img-ext4 | gzip | append-metadata |
| DEVICE_DTS := armada-388-clearfog-pro armada-388-clearfog-base |
| UBOOT := clearfog-u-boot-spl.kwb |
| BOOT_SCRIPT := clearfog |
| SUPPORTED_DEVICES += armada-388-clearfog armada-388-clearfog-pro |
| endef |
| TARGET_DEVICES += solidrun_clearfog-pro-a1 |