target/linux/apm821xx/dts/netgear-wndr4700.dts - T108 - Gitiles

 // SPDX-License-Identifier: GPL-2.0-only
 /*
  * Device Tree Source for Netgear WNDR4700/WNDR4720 Series
  *
  * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
  */

 /dts-v1/;

 #include "apm82181.dtsi"
 #include <dt-bindings/thermal/thermal.h>

 / {
 	model = "Netgear WNDR4700/WNDR4720 Series";
 	compatible = "netgear,wndr4700", "apm,bluestone";

 	aliases {
 		serial0 = &UART0;
 		led-boot = &status;
 		led-failsafe = &failsafe;
 		led-running = &status;
 		led-upgrade = &status;
 	};

 	chosen {
 		stdout-path = "/plb/opb/serial@ef600300:115200n8";
 	};

 	thermal-zones {
 		cpu_thermal: cpu-thermal {
 			polling-delay-passive = <10000>; /* milliseconds */
 			polling-delay = <20000>; /* milliseconds */

 			thermal-sensors = <&temp0 1>;

 			/*
 			 * REVISIT:
 			 *
 			 * Add the <&drive_temp>; sensor there and wire up
 			 * the coefficients = <1 1>; property.
 			 *
 			 * Note: The kernel does not yet support more than
 			 * one sensor (see of_thermal.c's function:
 			 * thermal_of_build_thermal_zon()). Once this is
 			 * implemented.
 			 */

 			trips {
 				/*
 				 * Once the thermal governers are a bit smarter
 				 * and do hysteresis properly, we can disable
 				 * the fan when the HDD and CPU has < 39 C.
 				 */
 				cpu_alert0: board-alert0 {
 					temperature = <25000>;
 					hysteresis = <2000>;
 					type = "active";
 				};

 				cpu_alert1: cpu-alert1 {
 					temperature = <27000>; /* millicelsius */
 					hysteresis = <2000>; /* millicelsius */
 					type = "active";
 				};

 				cpu_alert2: cpu-alert2 {
 					temperature = <65000>; /* millicelsius */
 					hysteresis = <2000>; /* millicelsius */
 					type = "active";
 				};

 				cpu_alert3: cpu-alert3 {
 					temperature = <70000>; /* millicelsius */
 					hysteresis = <2000>; /* millicelsius */
 					type = "active";
 				};

 				cpu_alert4: cpu-alert4 {
 					temperature = <75000>; /* millicelsius */
 					hysteresis = <2000>; /* millicelsius */
 					type = "active";
 				};

 				cpu_alert5: cpu-alert5 {
 					temperature = <80000>; /* millicelsius */
 					hysteresis = <2000>; /* millicelsius */
 					type = "active";
 				};

 				cpu_alert6: cpu-alert6 {
 					temperature = <85000>; /* millicelsius */
 					hysteresis = <2000>; /* millicelsius */
 					type = "active";
 				};

 				cpu_crit: cpu-crit {
 					temperature = <90000>; /* millicelsius */
 					hysteresis = <2000>; /* millicelsius */
 					type = "critical";
 				};
 			};

 			cooling-maps {
 				map0 {
 					trip = <&cpu_alert0>;
 					cooling-device = <&fan0 THERMAL_NO_LIMIT 0>;
 				};

 				map1 {
 					trip = <&cpu_alert1>;
 					cooling-device = <&fan0 1 76>;
 				};

 				map2 {
 					trip = <&cpu_alert2>;
 					cooling-device = <&fan0 77 101>;
 				};

 				map3 {
 					trip = <&cpu_alert3>;
 					cooling-device = <&fan0 102 147>;
 				};

 				map4 {
 					trip = <&cpu_alert4>;
 					cooling-device = <&fan0 148 207>;
 				};

 				map5 {
 					trip = <&cpu_alert5>;
 					cooling-device = <&fan0 208 231>;
 				};

 				map6 {
 					trip = <&cpu_alert6>;
 					cooling-device =<&fan0 232 THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 	};
 };

 &CRYPTO {
 	status = "okay";
 };

 &PKA {
 	status = "okay";
 };

 &TRNG {
 	status = "okay";
 };

 &SATA1 {
 	status = "okay";

 	/*
 	 * This drive may have a temperature sensor with a
 	 * thermal zone we can use for thermal control of the
 	 * chassis temperature using the fan.
 	 */

 	drive_temp: sata-port@0 {
 		reg = <0>;
 		#thermal-sensor-cells = <0>;
 	};
 };

 &USBOTG0 {
 	status = "okay";
 	dr_mode = "host";
 };

 &EBC0 {
 	ndfc@1,0 {
 		status = "okay";
 		/* 128 MiB Nand Flash */
 		nand {
 			partition0,0@0 {
 				label = "NAND 128MiB 3,3V 8-bit";
 				reg = <0x00000000 0x08000000>;
 				read-only;
 			};

 			partition0,1@0 {
 				label = "uboot";
 				reg = <0x00000000 0x00180000>;
 				read-only;
 			};

 			partition0,2@180000 {
 				label = "device-tree";
 				reg = <0x00180000 0x00020000>;
 			};

 			partition0,3@180000 {
 				label = "kernel";
 				reg = <0x00180000 0x00380000>;
 				/*
 				 * device-tree is @ 0x00180000 - 0x001fffff
 				 * kernel starts from 0x200000.
 				 * this is coded into netgear's u-boot.
 				 *
 				 * this partition will also contain a
 				 * fake/empty rootfs at the end to fool
 				 * Netgear's uboot rootfs integrety checks.
 				 */
 			};

 			partition0,4@500000 {
 				label = "ubi";
 				reg = <0x00500000 0x014e0000>;
 			};

 			partition0,5@19e0000 {
 				label = "config";
 				reg = <0x019e0000 0x00080000>;
 				read-only;
 			};

 			partition0,6@1a60000 {
 				label = "pot";
 				reg = <0x01a60000 0x00080000>;
 				read-only;
 			};

 			partition0,7@1ae0000 {
 				label = "traffic_meter";
 				reg = <0x01ae0000 0x00300000>;
 				read-only;
 			};

 			partition0,8@1de0000 {
 				label = "language";
 				reg = <0x01de0000 0x001c0000>;
 				read-only;
 			};

 			partition0,9@1fa0000 {
 				label = "ecos";
 				reg = <0x01fa0000 0x06020000>;
 				read-only;
 			};

 			partition0,10@7fc0000 {
 				label = "wifi_data";
 				reg = <0x07fc0000 0x00040000>;
 				read-only;
 			};

 			partition0,11@180000 {
 				label = "firmware";
 				reg = <0x00180000 0x01860000>;
 				read-only;
 			};
 		};
 	};
 };

 &UART0 {
 	status = "okay";
 };

 &GPIO0 {
 	status = "okay";
 };

 &IIC0 {
 	status = "okay";

 	fan0: fan@1b {
 		compatible = "microchip,tc654";
 		reg = <0x1b>;
 		cooling-min-level = <0>;
 		cooling-max-level = <255>;
 		#cooling-cells = <2>; /* min followed by max */

 		gpios = <&GPIO0 16 GPIO_ACTIVE_LOW>; /* fan status */
 		alarm-gpios = <&GPIO0 5 GPIO_ACTIVE_LOW>; /* fault */
 		interrupt-parent = <&UIC3>;
 		interrupts = <0x16 IRQ_TYPE_EDGE_FALLING>; /* fault */
 	};

 	temp0: temp@4d {
 		compatible = "gmt,g781";
 		reg = <0x4d>;
 		#thermal-sensor-cells = <1>;

 		/*
 		 * The LM90 has two sensors:
 		 *   temp0 -> internal to LM90
 		 *   temp1 -> external NTC near CPU
 		 */
 	};
 };


 &EMAC0 {
 	status = "okay";
 	phy-handle = <&phy0>;
 	fifo-entry-size = <10>;

 	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		phy0: ethernet-phy@0 {
 			device_type = "ethernet-phy";
 			reg = <0>;
 			qca,mib-poll-interval = <500>;

 			qca,ar8327-initvals = <
 				0x0010 0x40000000
 				0x0624 0x007f7f7f
 				0x0004 0x07a00000	/* PAD0_MODE */
 				0x000c 0x01000000	/* PAD6_MODE */
 				0x007c 0x0000007e	/* PORT0_STATUS */
 			>;
 		};
 	};
 };

 &POB0 {

 	keys {
 		compatible = "gpio-keys";

 		reset {
 			label = "Reset button";
 			gpios = <&GPIO0 15 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_RESTART>;
 			interrupt-parent = <&UIC1>;
 			interrupts = <0x14 IRQ_TYPE_EDGE_FALLING>;
 			debounce-interval = <60>;
 		};

 		backup_hd {
 			label = "Backup HD button";
 			gpios = <&GPIO0 19 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 			interrupt-parent = <&UIC1>;
 			interrupts = <0x1e IRQ_TYPE_EDGE_FALLING>;
 			debounce-interval = <60>;
 		};

 		rfkill {
 			label = "RFKILL button";
 			gpios = <&GPIO0 20 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_RFKILL>;
 			interrupt-parent = <&UIC1>;
 			interrupts = <0x1f IRQ_TYPE_EDGE_FALLING>;
 			debounce-interval = <60>;
 		};

 		wps {
 			label = "WPS button";
 			gpios = <&GPIO0 23 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_WPS_BUTTON>;
 			interrupt-parent = <&UIC2>;
 			interrupts = <0x19 IRQ_TYPE_EDGE_FALLING>;
 			debounce-interval = <60>;
 		};
 	};

 	leds {
 		compatible = "gpio-leds";
 		status: power-green {
 			label = "wndr4700:green:power";
 			gpios = <&GPIO0 8 GPIO_ACTIVE_HIGH>;
 		};

 		failsafe: power-orange {
 			label = "wndr4700:orange:power";
 			gpios = <&GPIO0 9 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "panic";
 		};

 		usb-blue {
 			label = "wndr4700:blue:usb";
 			gpios = <&GPIO0 10 GPIO_ACTIVE_HIGH>;
 			trigger-sources = <&usb2_port 1>, <&usb2_port 2>,
 					  <&usb3_port 1>, <&usb3_port 2>;
 			linux,default-trigger = "usbport";
 		};

 		logo-white {
 			label = "wndr4700:white:logo";
 			gpios = <&GPIO0 11 GPIO_ACTIVE_HIGH>;
 		};

 		wan-yellow {
 			label = "wndr4700:yellow:wan";
 			gpios = <&GPIO0 3 GPIO_ACTIVE_HIGH>;
 		};

 		wan-green {
 			label = "wndr4700:green:wan";
 			gpios = <&GPIO0 12 GPIO_ACTIVE_HIGH>;
 		};

 		hd-green {
 			label = "wndr4700:green:hd";
 			gpios = <&GPIO0 14 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "disk-activity";
 		};

 		hd-red {
 			label = "wndr4700:red:hd";
 			gpios = <&GPIO0 17 GPIO_ACTIVE_HIGH>;
 		};

 		wlan-blue {
 			label = "wndr4700:blue:wlan";
 			gpios = <&GPIO0 18 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "phy0tpt";
 		};
 	};
 };

 &PCIE0 {
 	status = "okay";

 	/*
 	 * relevant lspci topology:
 	 *
 	 *	-+-[0000:40]---00.0-[41-7f]----00.0-[42-45]--+-02.0-[43]----00.0
 	 *	                                             +-03.0-[44]----00.0
 	 *	                                             \-04.0-[45]----00.0
 	 *
 	 */

 	bridge@64,0 {
 		reg = <0x00400000 0 0 0 0>;
 		#address-cells = <3>;
 		#size-cells = <2>;
 		ranges;

 		bridge@65,0 {
 			/* IDT PES4T4 PCI Express Switch */
 			compatible = "pci111d,803a";
 			reg = <0x00410000 0 0 0 0>;
 			#address-cells = <3>;
 			#size-cells = <2>;
 			ranges;

 			bridge@66,2 {
 				compatible = "pci111d,803a";
 				reg = <0x00421000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
 				ranges;

 				wifi0: wifi@67,0 {
 					/* Atheros AR9380 5GHz */
 					compatible = "pci168c,0030";
 					reg = <0x00430000 0 0 0 0>;
 					interrupts = <3>; /* INTC */
 					qca,no-eeprom;
 					/* wifi CAL & MAC is stored in nvram */

 					/*
 					 * Because this was such a pain.
 					 * Here's the full device path:
 					 * pci0000:40/0000:40:00.0/0000:41:00.0/0000:42:02.0/0000:43:00.0
 					 */
 				};
 			};

 			bridge@66,3 {
 				compatible = "pci111d,803a";
 				reg = <0x00421800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
 				ranges;

 				wifi1: wifi@68,0 {
 					/* Atheros AR9381 2.4GHz */
 					compatible = "pci168c,0033";
 					reg = <0x00440000 0 0 0 0>;
 					interrupts = <4>; /* INTD */
 					qca,no-eeprom;
 					/* wifi CAL & MAC is stored in nvram */
 				};
 			};

 			bridge@66,4 {
 				compatible = "pci111d,803a";
 				reg = <0x00422000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
 				ranges;

 				usb1: usb@69,0 {
 					/* Renesas uPD720202 */
 					compatible = "pci1912,0015";
 					reg = <0x00450000 0 0 0 0>;
 					interrupts = <1>; /* INTA */

 					#address-cells = <1>;
 					#size-cells = <0>;

 					usb2_port: port@1 {
 						reg = <1>;
 						#trigger-source-cells = <1>;
 					};

 					usb3_port: port@2 {
 						reg = <2>;
 						#trigger-source-cells = <1>;
 					};
 				};
 			};
 		};
 	};
 };

 &MSI {
 	status = "okay";
 };
	// SPDX-License-Identifier: GPL-2.0-only
	/*
	* Device Tree Source for Netgear WNDR4700/WNDR4720 Series
	*
	* Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
	*/

	/dts-v1/;

	#include "apm82181.dtsi"
	#include <dt-bindings/thermal/thermal.h>

	/ {
	model = "Netgear WNDR4700/WNDR4720 Series";
	compatible = "netgear,wndr4700", "apm,bluestone";

	aliases {
	serial0 = &UART0;
	led-boot = &status;
	led-failsafe = &failsafe;
	led-running = &status;
	led-upgrade = &status;
	};

	chosen {
	stdout-path = "/plb/opb/serial@ef600300:115200n8";
	};

	thermal-zones {
	cpu_thermal: cpu-thermal {
	polling-delay-passive = <10000>; /* milliseconds */
	polling-delay = <20000>; /* milliseconds */

	thermal-sensors = <&temp0 1>;

	/*
	* REVISIT:
	*
	* Add the <&drive_temp>; sensor there and wire up
	* the coefficients = <1 1>; property.
	*
	* Note: The kernel does not yet support more than
	* one sensor (see of_thermal.c's function:
	* thermal_of_build_thermal_zon()). Once this is
	* implemented.
	*/

	trips {
	/*
	* Once the thermal governers are a bit smarter
	* and do hysteresis properly, we can disable
	* the fan when the HDD and CPU has < 39 C.
	*/
	cpu_alert0: board-alert0 {
	temperature = <25000>;
	hysteresis = <2000>;
	type = "active";
	};

	cpu_alert1: cpu-alert1 {
	temperature = <27000>; /* millicelsius */
	hysteresis = <2000>; /* millicelsius */
	type = "active";
	};

	cpu_alert2: cpu-alert2 {
	temperature = <65000>; /* millicelsius */
	hysteresis = <2000>; /* millicelsius */
	type = "active";
	};

	cpu_alert3: cpu-alert3 {
	temperature = <70000>; /* millicelsius */
	hysteresis = <2000>; /* millicelsius */
	type = "active";
	};

	cpu_alert4: cpu-alert4 {
	temperature = <75000>; /* millicelsius */
	hysteresis = <2000>; /* millicelsius */
	type = "active";
	};

	cpu_alert5: cpu-alert5 {
	temperature = <80000>; /* millicelsius */
	hysteresis = <2000>; /* millicelsius */
	type = "active";
	};

	cpu_alert6: cpu-alert6 {
	temperature = <85000>; /* millicelsius */
	hysteresis = <2000>; /* millicelsius */
	type = "active";
	};

	cpu_crit: cpu-crit {
	temperature = <90000>; /* millicelsius */
	hysteresis = <2000>; /* millicelsius */
	type = "critical";
	};
	};

	cooling-maps {
	map0 {
	trip = <&cpu_alert0>;
	cooling-device = <&fan0 THERMAL_NO_LIMIT 0>;
	};

	map1 {
	trip = <&cpu_alert1>;
	cooling-device = <&fan0 1 76>;
	};

	map2 {
	trip = <&cpu_alert2>;
	cooling-device = <&fan0 77 101>;
	};

	map3 {
	trip = <&cpu_alert3>;
	cooling-device = <&fan0 102 147>;
	};

	map4 {
	trip = <&cpu_alert4>;
	cooling-device = <&fan0 148 207>;
	};

	map5 {
	trip = <&cpu_alert5>;
	cooling-device = <&fan0 208 231>;
	};

	map6 {
	trip = <&cpu_alert6>;
	cooling-device =<&fan0 232 THERMAL_NO_LIMIT>;
	};
	};
	};
	};
	};

	&CRYPTO {
	status = "okay";
	};

	&PKA {
	status = "okay";
	};

	&TRNG {
	status = "okay";
	};

	&SATA1 {
	status = "okay";

	/*
	* This drive may have a temperature sensor with a
	* thermal zone we can use for thermal control of the
	* chassis temperature using the fan.
	*/

	drive_temp: sata-port@0 {
	reg = <0>;
	#thermal-sensor-cells = <0>;
	};
	};

	&USBOTG0 {
	status = "okay";
	dr_mode = "host";
	};

	&EBC0 {
	ndfc@1,0 {
	status = "okay";
	/* 128 MiB Nand Flash */
	nand {
	partition0,0@0 {
	label = "NAND 128MiB 3,3V 8-bit";
	reg = <0x00000000 0x08000000>;
	read-only;
	};

	partition0,1@0 {
	label = "uboot";
	reg = <0x00000000 0x00180000>;
	read-only;
	};

	partition0,2@180000 {
	label = "device-tree";
	reg = <0x00180000 0x00020000>;
	};

	partition0,3@180000 {
	label = "kernel";
	reg = <0x00180000 0x00380000>;
	/*
	* device-tree is @ 0x00180000 - 0x001fffff
	* kernel starts from 0x200000.
	* this is coded into netgear's u-boot.
	*
	* this partition will also contain a
	* fake/empty rootfs at the end to fool
	* Netgear's uboot rootfs integrety checks.
	*/
	};

	partition0,4@500000 {
	label = "ubi";
	reg = <0x00500000 0x014e0000>;
	};

	partition0,5@19e0000 {
	label = "config";
	reg = <0x019e0000 0x00080000>;
	read-only;
	};

	partition0,6@1a60000 {
	label = "pot";
	reg = <0x01a60000 0x00080000>;
	read-only;
	};

	partition0,7@1ae0000 {
	label = "traffic_meter";
	reg = <0x01ae0000 0x00300000>;
	read-only;
	};

	partition0,8@1de0000 {
	label = "language";
	reg = <0x01de0000 0x001c0000>;
	read-only;
	};

	partition0,9@1fa0000 {
	label = "ecos";
	reg = <0x01fa0000 0x06020000>;
	read-only;
	};

	partition0,10@7fc0000 {
	label = "wifi_data";
	reg = <0x07fc0000 0x00040000>;
	read-only;
	};

	partition0,11@180000 {
	label = "firmware";
	reg = <0x00180000 0x01860000>;
	read-only;
	};
	};
	};
	};

	&UART0 {
	status = "okay";
	};

	&GPIO0 {
	status = "okay";
	};

	&IIC0 {
	status = "okay";

	fan0: fan@1b {
	compatible = "microchip,tc654";
	reg = <0x1b>;
	cooling-min-level = <0>;
	cooling-max-level = <255>;
	#cooling-cells = <2>; /* min followed by max */

	gpios = <&GPIO0 16 GPIO_ACTIVE_LOW>; /* fan status */
	alarm-gpios = <&GPIO0 5 GPIO_ACTIVE_LOW>; /* fault */
	interrupt-parent = <&UIC3>;
	interrupts = <0x16 IRQ_TYPE_EDGE_FALLING>; /* fault */
	};

	temp0: temp@4d {
	compatible = "gmt,g781";
	reg = <0x4d>;
	#thermal-sensor-cells = <1>;

	/*
	* The LM90 has two sensors:
	* temp0 -> internal to LM90
	* temp1 -> external NTC near CPU
	*/
	};
	};


	&EMAC0 {
	status = "okay";
	phy-handle = <&phy0>;
	fifo-entry-size = <10>;

	mdio {
	#address-cells = <1>;
	#size-cells = <0>;
	phy0: ethernet-phy@0 {
	device_type = "ethernet-phy";
	reg = <0>;
	qca,mib-poll-interval = <500>;

	qca,ar8327-initvals = <
	0x0010 0x40000000
	0x0624 0x007f7f7f
	0x0004 0x07a00000 /* PAD0_MODE */
	0x000c 0x01000000 /* PAD6_MODE */
	0x007c 0x0000007e /* PORT0_STATUS */
	>;
	};
	};
	};

	&POB0 {

	keys {
	compatible = "gpio-keys";

	reset {
	label = "Reset button";
	gpios = <&GPIO0 15 GPIO_ACTIVE_LOW>;
	linux,code = <KEY_RESTART>;
	interrupt-parent = <&UIC1>;
	interrupts = <0x14 IRQ_TYPE_EDGE_FALLING>;
	debounce-interval = <60>;
	};

	backup_hd {
	label = "Backup HD button";
	gpios = <&GPIO0 19 GPIO_ACTIVE_LOW>;
	linux,code = <BTN_0>;
	interrupt-parent = <&UIC1>;
	interrupts = <0x1e IRQ_TYPE_EDGE_FALLING>;
	debounce-interval = <60>;
	};

	rfkill {
	label = "RFKILL button";
	gpios = <&GPIO0 20 GPIO_ACTIVE_LOW>;
	linux,code = <KEY_RFKILL>;
	interrupt-parent = <&UIC1>;
	interrupts = <0x1f IRQ_TYPE_EDGE_FALLING>;
	debounce-interval = <60>;
	};

	wps {
	label = "WPS button";
	gpios = <&GPIO0 23 GPIO_ACTIVE_LOW>;
	linux,code = <KEY_WPS_BUTTON>;
	interrupt-parent = <&UIC2>;
	interrupts = <0x19 IRQ_TYPE_EDGE_FALLING>;
	debounce-interval = <60>;
	};
	};

	leds {
	compatible = "gpio-leds";
	status: power-green {
	label = "wndr4700:green:power";
	gpios = <&GPIO0 8 GPIO_ACTIVE_HIGH>;
	};

	failsafe: power-orange {
	label = "wndr4700:orange:power";
	gpios = <&GPIO0 9 GPIO_ACTIVE_LOW>;
	linux,default-trigger = "panic";
	};

	usb-blue {
	label = "wndr4700:blue:usb";
	gpios = <&GPIO0 10 GPIO_ACTIVE_HIGH>;
	trigger-sources = <&usb2_port 1>, <&usb2_port 2>,
	<&usb3_port 1>, <&usb3_port 2>;
	linux,default-trigger = "usbport";
	};

	logo-white {
	label = "wndr4700:white:logo";
	gpios = <&GPIO0 11 GPIO_ACTIVE_HIGH>;
	};

	wan-yellow {
	label = "wndr4700:yellow:wan";
	gpios = <&GPIO0 3 GPIO_ACTIVE_HIGH>;
	};

	wan-green {
	label = "wndr4700:green:wan";
	gpios = <&GPIO0 12 GPIO_ACTIVE_HIGH>;
	};

	hd-green {
	label = "wndr4700:green:hd";
	gpios = <&GPIO0 14 GPIO_ACTIVE_HIGH>;
	linux,default-trigger = "disk-activity";
	};

	hd-red {
	label = "wndr4700:red:hd";
	gpios = <&GPIO0 17 GPIO_ACTIVE_HIGH>;
	};

	wlan-blue {
	label = "wndr4700:blue:wlan";
	gpios = <&GPIO0 18 GPIO_ACTIVE_HIGH>;
	linux,default-trigger = "phy0tpt";
	};
	};
	};

	&PCIE0 {
	status = "okay";

	/*
	* relevant lspci topology:
	*
	* -+-[0000:40]---00.0-[41-7f]----00.0-[42-45]--+-02.0-[43]----00.0
	* +-03.0-[44]----00.0
	* \-04.0-[45]----00.0
	*
	*/

	bridge@64,0 {
	reg = <0x00400000 0 0 0 0>;
	#address-cells = <3>;
	#size-cells = <2>;
	ranges;

	bridge@65,0 {
	/* IDT PES4T4 PCI Express Switch */
	compatible = "pci111d,803a";
	reg = <0x00410000 0 0 0 0>;
	#address-cells = <3>;
	#size-cells = <2>;
	ranges;

	bridge@66,2 {
	compatible = "pci111d,803a";
	reg = <0x00421000 0 0 0 0>;
	#address-cells = <3>;
	#size-cells = <2>;
	ranges;

	wifi0: wifi@67,0 {
	/* Atheros AR9380 5GHz */
	compatible = "pci168c,0030";
	reg = <0x00430000 0 0 0 0>;
	interrupts = <3>; /* INTC */
	qca,no-eeprom;
	/* wifi CAL & MAC is stored in nvram */

	/*
	* Because this was such a pain.
	* Here's the full device path:
	* pci0000:40/0000:40:00.0/0000:41:00.0/0000:42:02.0/0000:43:00.0
	*/
	};
	};

	bridge@66,3 {
	compatible = "pci111d,803a";
	reg = <0x00421800 0 0 0 0>;
	#address-cells = <3>;
	#size-cells = <2>;
	ranges;

	wifi1: wifi@68,0 {
	/* Atheros AR9381 2.4GHz */
	compatible = "pci168c,0033";
	reg = <0x00440000 0 0 0 0>;
	interrupts = <4>; /* INTD */
	qca,no-eeprom;
	/* wifi CAL & MAC is stored in nvram */
	};
	};

	bridge@66,4 {
	compatible = "pci111d,803a";
	reg = <0x00422000 0 0 0 0>;
	#address-cells = <3>;
	#size-cells = <2>;
	ranges;

	usb1: usb@69,0 {
	/* Renesas uPD720202 */
	compatible = "pci1912,0015";
	reg = <0x00450000 0 0 0 0>;
	interrupts = <1>; /* INTA */

	#address-cells = <1>;
	#size-cells = <0>;

	usb2_port: port@1 {
	reg = <1>;
	#trigger-source-cells = <1>;
	};

	usb3_port: port@2 {
	reg = <2>;
	#trigger-source-cells = <1>;
	};
	};
	};
	};
	};
	};

	&MSI {
	status = "okay";
	};