| --- a/arch/mips/ath25/Kconfig |
| +++ b/arch/mips/ath25/Kconfig |
| @@ -2,6 +2,7 @@ |
| config SOC_AR5312 |
| bool "Atheros AR5312/AR2312+ SoC support" |
| depends on ATH25 |
| + select GPIO_AR5312 |
| default y |
| |
| config SOC_AR2315 |
| --- a/arch/mips/ath25/ar5312.c |
| +++ b/arch/mips/ath25/ar5312.c |
| @@ -22,6 +22,7 @@ |
| #include <linux/platform_device.h> |
| #include <linux/mtd/physmap.h> |
| #include <linux/reboot.h> |
| +#include <linux/gpio.h> |
| #include <asm/bootinfo.h> |
| #include <asm/reboot.h> |
| #include <asm/time.h> |
| @@ -180,6 +181,22 @@ static struct platform_device ar5312_phy |
| .num_resources = 1, |
| }; |
| |
| +static struct resource ar5312_gpio_res[] = { |
| + { |
| + .name = "ar5312-gpio", |
| + .flags = IORESOURCE_MEM, |
| + .start = AR5312_GPIO_BASE, |
| + .end = AR5312_GPIO_BASE + AR5312_GPIO_SIZE - 1, |
| + }, |
| +}; |
| + |
| +static struct platform_device ar5312_gpio = { |
| + .name = "ar5312-gpio", |
| + .id = -1, |
| + .resource = ar5312_gpio_res, |
| + .num_resources = ARRAY_SIZE(ar5312_gpio_res), |
| +}; |
| + |
| static void __init ar5312_flash_init(void) |
| { |
| void __iomem *flashctl_base; |
| @@ -247,6 +264,8 @@ void __init ar5312_init_devices(void) |
| |
| platform_device_register(&ar5312_physmap_flash); |
| |
| + platform_device_register(&ar5312_gpio); |
| + |
| switch (ath25_soc) { |
| case ATH25_SOC_AR5312: |
| if (!ath25_board.radio) |
| --- a/drivers/gpio/Kconfig |
| +++ b/drivers/gpio/Kconfig |
| @@ -113,6 +113,13 @@ config GPIO_AMDPT |
| driver for GPIO functionality on Promontory IOHub |
| Require ACPI ASL code to enumerate as a platform device. |
| |
| +config GPIO_AR5312 |
| + bool "AR5312 SoC GPIO support" |
| + default y if SOC_AR5312 |
| + depends on SOC_AR5312 |
| + help |
| + Say yes here to enable GPIO support for Atheros AR5312/AR2312+ SoCs. |
| + |
| config GPIO_ASPEED |
| tristate "Aspeed GPIO support" |
| depends on (ARCH_ASPEED || COMPILE_TEST) && OF_GPIO |
| --- a/drivers/gpio/Makefile |
| +++ b/drivers/gpio/Makefile |
| @@ -30,6 +30,7 @@ obj-$(CONFIG_GPIO_ALTERA) += gpio-alt |
| obj-$(CONFIG_GPIO_AMD8111) += gpio-amd8111.o |
| obj-$(CONFIG_GPIO_AMD_FCH) += gpio-amd-fch.o |
| obj-$(CONFIG_GPIO_AMDPT) += gpio-amdpt.o |
| +obj-$(CONFIG_GPIO_AR5312) += gpio-ar5312.o |
| obj-$(CONFIG_GPIO_ARIZONA) += gpio-arizona.o |
| obj-$(CONFIG_GPIO_ASPEED) += gpio-aspeed.o |
| obj-$(CONFIG_GPIO_ATH79) += gpio-ath79.o |
| --- /dev/null |
| +++ b/drivers/gpio/gpio-ar5312.c |
| @@ -0,0 +1,121 @@ |
| +/* |
| + * This file is subject to the terms and conditions of the GNU General Public |
| + * License. See the file "COPYING" in the main directory of this archive |
| + * for more details. |
| + * |
| + * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved. |
| + * Copyright (C) 2006 FON Technology, SL. |
| + * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org> |
| + * Copyright (C) 2006-2009 Felix Fietkau <nbd@nbd.name> |
| + * Copyright (C) 2012 Alexandros C. Couloumbis <alex@ozo.com> |
| + */ |
| + |
| +#include <linux/kernel.h> |
| +#include <linux/init.h> |
| +#include <linux/platform_device.h> |
| +#include <linux/gpio.h> |
| + |
| +#define DRIVER_NAME "ar5312-gpio" |
| + |
| +#define AR5312_GPIO_DO 0x00 /* output register */ |
| +#define AR5312_GPIO_DI 0x04 /* intput register */ |
| +#define AR5312_GPIO_CR 0x08 /* control register */ |
| + |
| +#define AR5312_GPIO_CR_M(x) (1 << (x)) /* mask for i/o */ |
| +#define AR5312_GPIO_CR_O(x) (0 << (x)) /* mask for output */ |
| +#define AR5312_GPIO_CR_I(x) (1 << (x)) /* mask for input */ |
| +#define AR5312_GPIO_CR_INT(x) (1 << ((x)+8)) /* mask for interrupt */ |
| +#define AR5312_GPIO_CR_UART(x) (1 << ((x)+16)) /* uart multiplex */ |
| + |
| +#define AR5312_GPIO_NUM 8 |
| + |
| +static void __iomem *ar5312_mem; |
| + |
| +static inline u32 ar5312_gpio_reg_read(unsigned reg) |
| +{ |
| + return __raw_readl(ar5312_mem + reg); |
| +} |
| + |
| +static inline void ar5312_gpio_reg_write(unsigned reg, u32 val) |
| +{ |
| + __raw_writel(val, ar5312_mem + reg); |
| +} |
| + |
| +static inline void ar5312_gpio_reg_mask(unsigned reg, u32 mask, u32 val) |
| +{ |
| + ar5312_gpio_reg_write(reg, (ar5312_gpio_reg_read(reg) & ~mask) | val); |
| +} |
| + |
| +static int ar5312_gpio_get_val(struct gpio_chip *chip, unsigned gpio) |
| +{ |
| + return (ar5312_gpio_reg_read(AR5312_GPIO_DI) >> gpio) & 1; |
| +} |
| + |
| +static void ar5312_gpio_set_val(struct gpio_chip *chip, unsigned gpio, int val) |
| +{ |
| + u32 reg = ar5312_gpio_reg_read(AR5312_GPIO_DO); |
| + |
| + reg = val ? reg | (1 << gpio) : reg & ~(1 << gpio); |
| + ar5312_gpio_reg_write(AR5312_GPIO_DO, reg); |
| +} |
| + |
| +static int ar5312_gpio_dir_in(struct gpio_chip *chip, unsigned gpio) |
| +{ |
| + ar5312_gpio_reg_mask(AR5312_GPIO_CR, 0, 1 << gpio); |
| + return 0; |
| +} |
| + |
| +static int ar5312_gpio_dir_out(struct gpio_chip *chip, unsigned gpio, int val) |
| +{ |
| + ar5312_gpio_reg_mask(AR5312_GPIO_CR, 1 << gpio, 0); |
| + ar5312_gpio_set_val(chip, gpio, val); |
| + return 0; |
| +} |
| + |
| +static struct gpio_chip ar5312_gpio_chip = { |
| + .label = DRIVER_NAME, |
| + .direction_input = ar5312_gpio_dir_in, |
| + .direction_output = ar5312_gpio_dir_out, |
| + .set = ar5312_gpio_set_val, |
| + .get = ar5312_gpio_get_val, |
| + .base = 0, |
| + .ngpio = AR5312_GPIO_NUM, |
| +}; |
| + |
| +static int ar5312_gpio_probe(struct platform_device *pdev) |
| +{ |
| + struct device *dev = &pdev->dev; |
| + struct resource *res; |
| + int ret; |
| + |
| + if (ar5312_mem) |
| + return -EBUSY; |
| + |
| + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| + ar5312_mem = devm_ioremap_resource(dev, res); |
| + if (IS_ERR(ar5312_mem)) |
| + return PTR_ERR(ar5312_mem); |
| + |
| + ar5312_gpio_chip.parent = dev; |
| + ret = gpiochip_add(&ar5312_gpio_chip); |
| + if (ret) { |
| + dev_err(dev, "failed to add gpiochip\n"); |
| + return ret; |
| + } |
| + |
| + return 0; |
| +} |
| + |
| +static struct platform_driver ar5312_gpio_driver = { |
| + .probe = ar5312_gpio_probe, |
| + .driver = { |
| + .name = DRIVER_NAME, |
| + .owner = THIS_MODULE, |
| + } |
| +}; |
| + |
| +static int __init ar5312_gpio_init(void) |
| +{ |
| + return platform_driver_register(&ar5312_gpio_driver); |
| +} |
| +subsys_initcall(ar5312_gpio_init); |
| --- a/arch/mips/Kconfig |
| +++ b/arch/mips/Kconfig |
| @@ -190,6 +190,7 @@ config ATH25 |
| select CEVT_R4K |
| select CSRC_R4K |
| select DMA_NONCOHERENT |
| + select GPIOLIB |
| select IRQ_MIPS_CPU |
| select IRQ_DOMAIN |
| select SYS_HAS_CPU_MIPS32_R1 |