target/linux/bcm53xx/patches-5.4/034-v5.11-0004-ARM-dts-BCM5301X-Linksys-EA9500-add-fixed-partitions.patch

From bd9a01e28e5d1632528e531480b42d6e2c861d88 Mon Sep 17 00:00:00 2001
From: Vivek Unune <npcomplete13@gmail.com>
Date: Sun, 1 Nov 2020 15:08:03 -0500
Subject: [PATCH] ARM: dts: BCM5301X: Linksys EA9500 add fixed partitions

This router has dual paritions to store trx firmware image and
dual partitions for nvram. The second one in each of these cases acts
as a backup store.

When tested with OpenWrt, the default partition parser causes two issues:

1. It labels both nvram partitions as nvram. In factory, second one is
labeled devinfo.
2. It parses second trx image and tries to create second 'linux' partition
and fails with - cannot create duplicate 'linux' partition

The following patch works around both of these issues.

Signed-off-by: Vivek Unune <npcomplete13@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 .../boot/dts/bcm47094-linksys-panamera.dts    | 41 +++++++++++++++++++
 1 file changed, 41 insertions(+)

--- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
@@ -292,3 +292,44 @@
 &usb3_phy {
 	status = "okay";
 };
+
+&nandcs {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x0000000 0x0080000>;
+			read-only;
+		};
+
+		partition@80000 {
+			label = "nvram";
+			reg = <0x080000 0x0100000>;
+		};
+
+		partition@180000{
+			label = "devinfo";
+			reg = <0x0180000 0x080000>;
+		};
+
+		partition@200000 {
+			label = "firmware";
+			reg = <0x0200000 0x01D00000>;
+			compatible = "brcm,trx";
+		};
+
+		partition@1F00000 {
+			label = "failsafe";
+			reg = <0x01F00000 0x01D00000>;
+			read-only;
+		};
+
+		partition@5200000 {
+			label = "system";
+			reg = <0x05200000 0x02E00000>;
+		};
+	};
+};