| // SPDX-License-Identifier: GPL-2.0-or-later OR MIT |
| |
| #include "mt7620a.dtsi" |
| |
| #include <dt-bindings/input/input.h> |
| #include <dt-bindings/gpio/gpio.h> |
| |
| / { |
| compatible = "dlink,dir-510l", "ralink,mt7620a-soc"; |
| model = "D-Link DIR-510L"; |
| |
| aliases { |
| led-boot = &led_status; |
| led-failsafe = &led_status; |
| led-running = &led_status; |
| led-upgrade = &led_status; |
| }; |
| |
| chosen { |
| bootargs = "console=ttyS1,57600"; |
| }; |
| |
| keys { |
| compatible = "gpio-keys"; |
| |
| reset { |
| label = "reset"; |
| gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; |
| linux,code = <KEY_RESTART>; |
| }; |
| |
| wps { |
| label = "wps"; |
| gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; |
| linux,code = <KEY_WPS_BUTTON>; |
| }; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| |
| led_status: status { |
| label = "green:status"; |
| gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| status-red { |
| label = "red:status"; |
| gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>; |
| }; |
| }; |
| }; |
| |
| ðernet { |
| mediatek,portmap = "llllw"; |
| }; |
| |
| &uart { |
| status = "okay"; |
| }; |
| |
| &spi0 { |
| status = "okay"; |
| |
| flash@0 { |
| compatible = "jedec,spi-nor"; |
| reg = <0>; |
| spi-max-frequency = <50000000>; |
| |
| partitions { |
| compatible = "fixed-partitions"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| partition@0 { |
| label = "jboot"; |
| reg = <0x0 0x10000>; |
| read-only; |
| }; |
| |
| partition@10000 { |
| label = "recovery"; |
| reg = <0x10000 0x200000>; |
| read-only; |
| }; |
| |
| partition@210000 { |
| compatible = "amit,jimage"; |
| label = "firmware"; |
| reg = <0x210000 0xde0000>; |
| }; |
| |
| config: partition@ff0000 { |
| label = "config"; |
| reg = <0xff0000 0x10000>; |
| read-only; |
| }; |
| }; |
| }; |
| }; |
| |
| &ehci { |
| status = "okay"; |
| }; |
| |
| &ohci { |
| status = "okay"; |
| }; |
| |
| &pcie { |
| status = "okay"; |
| }; |
| |
| &pcie0 { |
| mt76x0e@0,0 { |
| reg = <0x0000 0 0 0 0>; |
| mtd-mac-address = <&config 0xe490>; |
| mtd-mac-address-increment = <(2)>; |
| mediatek,mtd-eeprom = <&config 0xe05d>; |
| }; |
| }; |
| |
| &state_default { |
| default { |
| groups = "i2c", "uartf"; |
| function = "gpio"; |
| }; |
| }; |