| #include "mt7621.dtsi" |
| |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/input/input.h> |
| |
| / { |
| compatible = "firefly,firewrt", "mediatek,mt7621-soc"; |
| model = "Firefly FireWRT"; |
| |
| aliases { |
| led-boot = &led_power; |
| led-failsafe = &led_power; |
| led-running = &led_power; |
| led-upgrade = &led_power; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| |
| led_power: power { |
| label = "green:power"; |
| gpios = <&gpio 22 GPIO_ACTIVE_LOW>; |
| }; |
| }; |
| |
| keys { |
| compatible = "gpio-keys"; |
| |
| wps { |
| label = "wps"; |
| gpios = <&gpio 18 GPIO_ACTIVE_LOW>; |
| linux,code = <KEY_WPS_BUTTON>; |
| }; |
| |
| power { |
| label = "power"; |
| gpios = <&gpio 23 GPIO_ACTIVE_LOW>; |
| linux,code = <KEY_POWER>; |
| }; |
| }; |
| }; |
| |
| &sdhci { |
| status = "okay"; |
| }; |
| |
| &spi0 { |
| status = "okay"; |
| |
| flash@0 { |
| compatible = "jedec,spi-nor"; |
| reg = <0>; |
| spi-max-frequency = <10000000>; |
| |
| partitions { |
| compatible = "fixed-partitions"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| partition@0 { |
| label = "u-boot"; |
| reg = <0x0 0x30000>; |
| read-only; |
| }; |
| |
| partition@30000 { |
| label = "u-boot-env"; |
| reg = <0x30000 0x10000>; |
| read-only; |
| }; |
| |
| factory: partition@40000 { |
| label = "factory"; |
| reg = <0x40000 0x10000>; |
| read-only; |
| }; |
| |
| partition@50000 { |
| compatible = "denx,uimage"; |
| label = "firmware"; |
| reg = <0x50000 0xfb0000>; |
| }; |
| }; |
| }; |
| }; |
| |
| &pcie { |
| status = "okay"; |
| }; |
| |
| &pcie0 { |
| mt76@0,0 { |
| reg = <0x0000 0 0 0 0>; |
| mediatek,mtd-eeprom = <&factory 0x8000>; |
| ieee80211-freq-limit = <5000000 6000000>; |
| }; |
| }; |
| |
| &pcie1 { |
| mt76@0,0 { |
| reg = <0x0000 0 0 0 0>; |
| mediatek,mtd-eeprom = <&factory 0x0000>; |
| ieee80211-freq-limit = <2400000 2500000>; |
| }; |
| }; |
| |
| &gmac0 { |
| mtd-mac-address = <&factory 0xe000>; |
| }; |
| |
| &switch0 { |
| ports { |
| port@0 { |
| status = "okay"; |
| label = "lan1"; |
| }; |
| |
| port@1 { |
| status = "okay"; |
| label = "lan2"; |
| }; |
| |
| port@2 { |
| status = "okay"; |
| label = "lan3"; |
| }; |
| |
| port@3 { |
| status = "okay"; |
| label = "lan4"; |
| }; |
| |
| port@4 { |
| status = "okay"; |
| label = "wan"; |
| mtd-mac-address = <&factory 0xe000>; |
| mtd-mac-address-increment = <1>; |
| }; |
| }; |
| }; |
| |
| &state_default { |
| gpio { |
| groups = "wdt", "rgmii2"; |
| function = "gpio"; |
| }; |
| }; |